# Copyright (c) ETSI 2017. # https://forge.etsi.org/etsi-forge-copyright-notice.txt definitions: Link: description: > This type represents a link to a resource using an absolute URI. type: object required: - href properties: href: description: > URI of another resource referenced from a resource. Shall be an absolute URI (i.e. a UTI that contains {apiRoot}). $ref: "#/definitions/Uri" NotificationLink: description: > This type represents a link to a resource in a notification, using an absolute or relative URI. type: object required: - href properties: href: description: > URI of a resource referenced from a notification. Should be an absolute URI (i.e. a URI that contains {apiRoot}), however, may be a relative URI (i.e. a URI where the {apiRoot} part is omitted) if the {apiRoot} information is not available. $ref: "#/definitions/Uri" KeyValuePairs: description: > This type represents a list of key-value pairs. The order of the pairs in the list is not significant. In JSON, a set of keyvalue pairs is represented as an object. It shall comply with the provisions defined in clause 4 of IETF RFC 8259. In the following example, a list of key-value pairs with four keys ("aString", "aNumber", "anArray" and "anObject") is provided to illustrate that the values associated with different keys can be of different type. type: object ApiVersionInformation: description: > This type represents API version information. type: object required: - uriPrefix - apiVersions properties: uriPrefix: description: > Specifies the URI prefix for the API, in the following form {apiRoot}/{apiName}/{apiMajorVersion}/. type: string apiVersions: description: > Version(s) supported for the API signaled by the uriPrefix attribute. type: array items: type: object required: - version properties: version: description: > Identifies a supported version. The value of the version attribute shall be a version identifier as specified in clause 9.1 (SOL013). type: string isDeprecated: description: > If such information is available, this attribute indicates whether use of the version signaled by the version attribute is deprecated (true) or not (false). A deprecated version is still supported by the API producer but is recommended not to be used any longer. When a version is no longer supported, it does not appear in the response body. type: boolean retirementDate: description: > The date and time after which the API version will no longer be supported. This attribute may be included if the value of the isDeprecated attribute is set to true and shall be absent otherwise. $ref: "#/definitions/DateTime" VnfInstanceSubscriptionFilter: description: > This type represents subscription filter criteria to match VNF instances. * NOTE 1: The attributes "vnfdIds" and "vnfProductsFromProviders" are alternatives to reference to VNF instances that are based on certain VNFDs in a filter. They should not be used both in the same filter instance, but one alternative should be chosen. NOTE 2: The attributes "vnfInstanceIds" and "vnfInstanceNames" are alternatives to reference to particular VNF instances in a filter. They should not be used both in the same filter instance, but one alternative should be chosen. type: object anyOf: - oneOf: - required: - vnfdId - required: - vnfProductsFromProviders - oneOf: - required: - vnfInstanceIds - required: - vnfInstanceNames properties: vnfdIds: description: > If present, match VNF instances that were created based on a VNFD identified by one of the vnfdId values listed in this attribute. See note 1. type: array items: $ref: "#/definitions/Identifier" vnfProductsFromProviders: description: > If present, match VNF instances that belong to VNF products from certain providers. See note 1. type: array items: type: object required: - vnfProvider properties: vnfProvider: description: > Name of the VNF provider to match. type: string vnfProducts: description: > If present, match VNF instances that belong to VNF products with certain product names, from one particular provider. type: array items: type: object required: - vnfProductName properties: vnfProductName: description: > Name of the VNF product to match. type: string versions: description: > If present, match VNF instances that belong to VNF products with certain versions and a certain product name, from one particular provider. type: array items: type: object required: - vnfSoftwareVersion properties: vnfSoftwareVersion: description: > Software version to match. $ref: "#/definitions/Version" vnfdVersions: description: > If present, match VNF instances that belong to VNF products with certain VNFD versions, a certain software version and a certain product name, from one particular provider. type: array items: $ref: "#/definitions/Version" vnfInstanceIds: description: > If present, match VNF instances with an instance identifier listed in this attribute. See note 2. type: array items: $ref: "#/definitions/Identifier" vnfInstanceNames: description: > If present, match VNF instances with a VNF Instance Name listed in this attribute. See note 2. type: array items: type: string VimConnectionInfo: description: > This type represents parameters to connect to a VIM for managing the resources of a VNF instance. * NOTE 1: If applicable, this attribute also provides information about the resourceGroupIds that are accessible using a particular set of credentials. See definition of "resourceGroupId" in clause 9.5.3.3. * NOTE 2: Once the connectivity between VNFM and VIM is provided through a secure connection over HTTP Secure (HTTP over SSL/TLS), and the connection might also be established through a VPN (for example TLS-based VPN tunnelling) for site-to-site connection, the "accessInfo" JSON data structure, and the sensitive data related information ("username"/"password" as required properties for authentication purpose), will be transmitted as plain text through a TLS tunnel without additional encoding/encryption before transmitting it, making the sensitive data visible to the endpoint. The base64 encoded certificates are only used by the VNFM to verify the authenticity of the interface endpoint of the VIM. type: object required: - vimType properties: vimId: description: > The identifier of the VIM instance. This identifier is managed by the NFVO. Shall be present to address additional information about the VIM if such information has been configured into the VNFM by means outside the scope of the present document, and should be absent otherwise. $ref: "#/definitions/Identifier" vimType: description: > Discriminator for the different types of the VIM information. The value of this attribute determines the structure of the "interfaceInfo" and "accessInfo" attributes, based on the type of the VIM. The set of permitted values is expected to change over time as new types or versions of VIMs become available. The ETSI NFV registry of VIM-related information provides access to information about VimConnectionInfo definitions for various VIM types. The structure of the registry is defined in Annex C of SOL003. type: string interfaceInfo: description: > Information about the interface or interfaces to the VIM, if applicable, such as the URI of an interface endpoint to communicate with the VIM. The applicable keys are dependent on the content of vimType. Alternatively, such information may have been configured into the VNFM and bound to the vimId. $ref: "#/definitions/KeyValuePairs" accessInfo: description: > Authentication credentials for accessing the VIM, and other access-related information such as tenants or infrastructure resource groups (see note 1). The applicable keys are dependent on the content of vimType. If the VimConnectionInfo structure is part of an HTTP response payload body, sensitive attributes that are children of this attributes (such as passwords) shall not be included. If the VimConnectionInfo structure is part of an HTTP request payload body, sensitive attributes that are children of this attribute (such as passwords) shall be present if they have not been provisioned out of band. See note 2. $ref: "#/definitions/KeyValuePairs" extra: description: > VIM type specific additional information. The applicable structure, and whether or not this attribute is available, is dependent on the content of vimType. $ref: "#/definitions/KeyValuePairs" ResourceHandle: required: - resourceId type: object description: > This type represents the information that allows addressing a virtualised resource that is used by a VNF instance. Information about the resource is available from the VIM. properties: vimConnectionId: description: > Identifier of the VIM connection to manage the resource. This attribute shall only be supported and present if VNF-related resource management in direct mode is applicable. The applicable "VimConnectionInfo" structure, which is referenced by vimConnectionId, can be obtained from the "vimConnectionInfo" attribute of the "VnfInstance" structure. $ref: "#/definitions/Identifier" resourceProviderId: description: > Identifier of the entity responsible for the management of the resource. This attribute shall only be supported and present when VNF-related resource management in indirect mode is applicable. The identification scheme is outside the scope of the present document. $ref: "#/definitions/Identifier" resourceId: description: > Identifier of the resource in the scope of the VIM or the resource provider. $ref: "#/definitions/IdentifierInVim" vimLevelResourceType: description: > The value set of the "vimLevelResourceType" attribute is within the scope of the VIM or the resource provider and can be used as information that complements the ResourceHandle. This value set is different from the value set of the "type" attribute in the ResourceDefinition (refer to clause 9.5.3.2 in SOL003). type: string VnfExtCpData: description: > This type represents configuration information for external CPs created. * NOTE 1: In case this identifier refers to a CPD with trunking enabled, the external CP instances created from this CPD will represent ports in a trunk. * NOTE 2: Within one VNF instance, all VNFC instances created from a particular VDU have the same external connectivity. Thus, given a particular value of the "cpdId" attribute, there shall be one "cpConfig" entry for each VNFC instance that has been or can be created from a VDU which includes a CPD identified by the "cpdId" attribute. If the cpConfig represents a subport in a trunk, all "cpConfig" entries in this list shall have the same segmentationId, which means they are connected to the same set of external VLs via the trunk. * NOTE 3: The map entry value shall be set to "null" in order to delete a "VnfExtCpConfig" entry identified by a particular key value from the map, i.e. for the disconnection of an existing external CP instance addressed by cpInstanceId in the deleted map entry from a particular external virtual link, and deletion of that instance in case it represents a subport. Deleting the last key from the map removes the affected instance of the "VnfExtCpData" structure from its parent data structure. type: object required: - cpdId properties: cpdId: description: > The identifier of the CPD in the VNFD. See note 1. $ref: "#/definitions/IdentifierInVnfd" cpConfig: description: > Map of instance data that need to be configured on the CP instances created from the respective CPD. The key of the map which identifies the individual VnfExtCpConfig entries is managed by the API consumer. The entries shall be applied by the VNFM according to the rules of JSON Merge Patch (see IETF RFC 7396). See note 2 and note 3. type: object additionalProperties: $ref: "#/definitions/VnfExtCpConfig" VnfExtCpConfig: description: > This type represents an externally provided link port or network address information per instance of an external connection point. In case a link port is provided, the VNFM shall use that link port when connecting the external CP to the external VL. In a link port is not provided, the VNFM shall create a link port on the external VL, and use that link port to connect the external CP to the external VL. * NOTE: The following conditions apply to the attributes "linkPortId" and "cpProtocolData": 1) Void. 2) At least one of the "linkPortId" and "cpProtocolData" attributes shall be present for an external CP instance representing a subport that is to be created, or an external CP instance that is to be created by creating the corresponding VNFC or VNF instance during the current or a subsequent LCM operation, or for an existing external CP instance that is to be re-configured or added to a particular external virtual link. 3) If the "linkPortId" attribute is absent, the VNFM shall create a link port. 4) If the "cpProtocolData" attribute is absent, the "linkPortId" attribute shall be provided referencing a pre created link port, and the VNFM can use means outside the scope of the present document to obtain the pre-configured address information for the connection point from the resource representing the link port. 5) If both "cpProtocolData" and "linkportId" are provided, the API consumer shall ensure that the cpProtocolData can be used with the pre-created link port referenced by "linkPortId". anyOf: - required: - linkPortId - required: - cpProtocolData type: object properties: parentCpConfigId: description: > Value of the key that identifies the "VnfExtCpConfig" map entry which corresponds to the parent port of the trunk. Reference to the "VnfExtCpConfig" entry that corresponds to the parent port of the trunk. Only present in "VnfExtCpConfig" structures that provide configuration information for a CP which represents a sub-port in a trunk, and if parent ports are supported. $ref: "#/definitions/IdentifierInVnf" linkPortId: description: > Identifier of a pre-configured link port to which the external CP will be associated. See note $ref: "#/definitions/Identifier" createExtLinkPort: description: Indicates to the VNFM the need to create a dedicated link port for the external CP. If set to True, the VNFM shall create a link port. If set to False, the VNFM shall not create a link port. This attribute is only applicable for external CP instances without a floating IP address that expose a VIP CP instance for which a dedicated IP address is allocated. It shall be present in that case and shall be absent otherwise. type: boolean cpProtocolData: description: > Parameters for configuring the network protocols on the link port that connects the CP to a VL. See note. type: array items: $ref: "#/definitions/CpProtocolData" CpProtocolData: description: > This type represents network protocol data. * NOTE: This attribute allows to signal the addition of further types of layer and protocol in future versions of the present document in a backwards-compatible way. In the current version of the present document, only IP over Ethernet is supported. type: object required: - layerProtocol properties: layerProtocol: description: > Identifier of layer(s) and protocol(s). See note. type: string enum: - IP_OVER_ETHERNET ipOverEthernet: description: > Network address data for IP over Ethernet to assign to the extCP instance. Shall be present if layerProtocol is equal to "IP_OVER_ETHERNET", and shall be absent otherwise. $ref: "#/definitions/IpOverEthernetAddressData" IpOverEthernetAddressData: description: > This type represents network address data for IP over Ethernet. * NOTE 1: At least one of "macAddress" or "ipAddresses" shall be present. * NOTE 2: Exactly one of "fixedAddresses", "numDynamicAddresses" or "ipAddressRange" shall be present. * NOTE 3: If the CP instance represents a subport in a trunk, segmentationId shall be present. Otherwise it shall not be present. * NOTE 4: Depending on the NFVI networking infrastructure, the segmentationId may indicate the actual network segment value (e.g. vlan Id, Vxlan segmentation id, etc.) used in the transport header of the packets or it may be an identifier used between the application and the NFVI networking infrastructure to identify the network sub-interface of the trunk port in question. In the latter case the NFVI infrastructure will map this local segmentationId to whatever segmentationId is actually used by the NFVI’s transport technology. type: object anyOf: - required: - macAddress - required: - ipAddresses oneOf: - required: - fixedAddresses - required: - numDynamicAddresses - required: - ipAddressRange properties: macAddress: description: > MAC address. If this attribute is not present, it shall be chosen by the VIM. See note 1. $ref: "#/definitions/MacAddress" segmentationType: description: > Specifies the encapsulation type for the traffics coming in and out of the trunk subport. Permitted values: - VLAN: the subport uses VLAN as encapsulation type. - INHERIT: the subport gets its segmentation type from the network it’s connected to. This attribute may be present for CP instances that represent subports in a trunk and shall be absent otherwise. If this attribute is not present for a subport CP instance, default value VLAN shall be used. type: string enum: - VLAN - INHERIT segmentationId: description: > Identification of the network segment to which the CP instance connects to. See note 3 and note 4. type: string ipAddresses: description: > List of IP addresses to assign to the CP instance. Each entry represents IP address data for fixed or dynamic IP address assignment per subnet. If this attribute is not present, no IP address shall be assigned. See note 1. type: array items: type: object required: - type properties: type: description: > The type of the IP addresses. Permitted values: IPV4, IPV6. type: string enum: - IPV4 - IPV6 fixedAddresses: description: > Fixed addresses to assign (from the subnet defined by "subnetId" if provided). See note 2. type: array items: $ref: "#/definitions/IpAddress" numDynamicAddresses: description: > Number of dynamic addresses to assign (from the subnet defined by "subnetId" if provided). See note 2. type: integer addressRange: description: > An IP address range to be used, e.g. in case of egress connections. In case this attribute is present, IP addresses from the range will be used. See note 2. type: object required: - minAddress - maxAddress properties: minAddress: description: > Lowest IP address belonging to the range. $ref: "#/definitions/IpAddress" maxAddress: description: > Highest IP address belonging to the range. $ref: "#/definitions/IpAddress" subnetId: description: > Subnet defined by the identifier of the subnet resource in the VIM. In case this attribute is present, IP addresses from that subnet will be assigned; otherwise, IP addresses not bound to a subnet will be assigned. $ref: "#/definitions/IdentifierInVim" ExtVirtualLinkData: description: > This type represents an external VL. * NOTE 1: The information about the VIM connection referenced by the VIM connection id is known to the VNFM. Moreover, the identifier of the VIM connection provides scope to the resourceId. * NOTE 2: A link port is not needed for an external CP instance that exposes a VIP CP in the following cases: 1 For a VIP CP directly exposed as extCP: 1.1 No dedicated IP address is allocated as VIP address, as indicated in the VNFD. 1.2 A dedicated IP addresss is allocated as VIP address, but the NFVO indicates that no port is needed (createExtLinkPort in VnfExtCpconfig set to false). 2 For a VIP CP exposed as extCP via a floating IP address: 2.1 No dedicated IP address is allocated as VIP address, as indicated in the VNFD, and the VNFC CP associated to the VIP CP is also exposed via a floating IP addresss. type: object required: - id - resourceId - extCps properties: id: description: > The identifier of the external VL instance. The identifier is assigned by the NFV-MANO entity that manages this VL instance. $ref: "#/definitions/Identifier" vimConnectionId: description: > Identifier of the VIM connection to manage this resource. This attribute shall only be supported and present if VNF-related resource management in direct mode is applicable. See note 1. $ref: "#/definitions/Identifier" resourceProviderId: description: > Identifies the entity responsible for the management of this resource. This attribute shall only be supported and present if VNF-related resource management in indirect mode is applicable. The identification scheme is outside the scope of the present document. $ref: "#/definitions/Identifier" resourceId: description: > The identifier of the resource in the scope of the VIM or the resource provider. $ref: "#/definitions/IdentifierInVim" extCps: description: > External CPs of the VNF to be connected to this external VL. Entries in the list of external CP data that are unchanged need not be supplied if the ExtVirtualLinkData structure is part of a request or response that modifies the external connectivity. type: array items: $ref: "#/definitions/VnfExtCpData" extLinkPorts: description: > Externally provided link ports to be used to connect external connection points to this external VL. If this attribute is not present, the VNFM shall create the link ports on the external VL unless the extCp exposes a VIP CP and a link port is not needed for it based on the conditions defined below. See note 2. type: array items: $ref: "#/definitions/ExtLinkPortData" Identifier: description: > An identifier with the intention of being globally unique. type: string DateTime: description: > Date-time stamp. Representation: String formatted according to IETF RFC 3339. type: string format: date-time Uri: description: > String formatted according to IETF RFC 3986. type: string Boolean: description: > The Boolean is a data type having two values (true and false). type: boolean MacAddress: description: > A MAC address. Representation: string that consists of groups of two hexadecimal digits, separated by hyphens or colons. type: string format: MAC IpAddress: description: > An IPV4 or IPV6 address. Representation: In case of an IPV4 address, string that consists of four decimal integers separated by dots, each integer ranging from 0 to 255. In case of an IPV6 address, string that consists of groups of zero to four hexadecimal digits, separated by colons. type: string format: IP Version: description: > A version. type: string String: description: > A string defined in IETF RFC 8259. type: string Number: description: > A number defined in IETF RFC 8259. type: number UnsignedInt: description: > Unsigned integer number type: integer minimum: 0 IdentifierInVnfd: description: > An identifier that is unique within a VNF descriptor. type: string IdentifierInVim: description: > An identifier maintained by the VIM or other resource provider. It is expected to be unique within the VIM instance. type: string IdentifierInVnf: description: > An identifier that is unique for the respective type within a VNF instance, but may not be globally unique. type: string IdentifierLocal: description: > An identifier that is unique within a limited local scope other than above listed identifiers, such as within a complex data structure or within a request-response pair. Representation: string of variable length. type: string Checksum: #no definition found description: > Cheksum description type: string ######################################################################################################################## # TO CHECK IF INCLUDE THESE DATA TYPES IN ANOTHER DEF FILES VnfLinkPortData: description: > This type represents an externally provided link port to be used to connect a VNFC connection point to an exernally managed VL. type: object required: - vnfLinkPortId - resourceHandle properties: vnfLinkPortId: description: > Identifier of this link port as provided by the entity that has created the link port. $ref: "#/definitions/Identifier" resourceHandle: description: > Resource handle of the virtualised resource that realizes the link port. $ref: "#/definitions/ResourceHandle" ExtLinkPortData: description: > This type represents an externally provided link port to be used to connect an external connection point to an external VL. * NOTE: The value of "trunkResourceId" is scoped by the value of "vimConnectionId" in the "resourceHandle" attribute. type: object required: - id - resourceHandle properties: id: description: > Identifier of this link port as provided by the entity that has created the link port. $ref: "#/definitions/Identifier" resourceHandle: description: > Reference to the virtualised resource realizing this link port. $ref: "#/definitions/ResourceHandle" trunkResourceId: description: > Identifier of the trunk resource in the VIM. Shall be present if the present link port corresponds to the parent port that the trunk resource is associated with. See note. $ref: "#/definitions/IdentifierInVim" GrantedLcmOperationType: description: > The enumeration GrantedLcmOperationType defines the permitted values to represent VNF lifecycle operation types in grant requests. Value | Description ------|------------ INSTANTIATE | Represents the "Instantiate VNF" LCM operation. SCALE | Represents the "Scale VNF" LCM operation. SCALE_TO_LEVEL | Represents the "Scale VNF to Level" LCM operation. CHANGE_FLAVOUR | Represents the "Change VNF Flavour" LCM operation. TERMINATE | Represents the "Terminate VNF" LCM operation. HEAL | Represents the "Heal VNF" LCM operation. OPERATE | Represents the "Operate VNF" LCM operation. CHANGE_EXT_CONN | Represents the "Change external VNF connectivity" LCM operation. CHANGE_VNFPKG | Represents the "Change current VNF package" LCM operation. CREATE_SNAPSHOT | Represents the "Create VNF snapshot" LCM operation. REVERT_TO_SNAPSHOT | Represents the "Revert to VNF snapshot" LCM operation. type: string enum: - INSTANTIATE - SCALE - SCALE_TO_LEVEL - CHANGE_FLAVOUR - TERMINATE - HEAL - OPERATE - CHANGE_EXT_CONN - CHANGE_VNFPKG - CREATE_SNAPSHOT - REVERT_TO_SNAPSHOT LcmOperationType: description: > The enumeration LcmOpType defines the permitted values to represent VNF lifecycle operation types in VNF lifecycle management operation occurrence resources and VNF lifecycle management operation occurrence notifications. It shall comply with the provisions defined in table 5.5.4.5-1. Value | Description ------|------------ INSTANTIATE | Represents the "Instantiate VNF" LCM operation. SCALE | Represents the "Scale VNF" LCM operation. SCALE_TO_LEVEL | Represents the "Scale VNF to Level" LCM operation. CHANGE_FLAVOUR | Represents the "Change VNF Flavour" LCM operation. TERMINATE | Represents the "Terminate VNF" LCM operation. HEAL | Represents the "Heal VNF" LCM operation. OPERATE | Represents the "Operate VNF" LCM operation. CHANGE_EXT_CONN | Represents the "Change external VNF connectivity" LCM operation. MODIFY_INFO | Represents the "Modify VNF Information" LCM operation. CREATE_SNAPSHOT | Represents the "Create VNF Snapshot" LCM operation. REVERT_TO_SNAPSHOT | Represents the “Revert-To VNF Snapshot" LCM operation. CHANGE_VNFPKG | Represents the "Change current VNF package" LCM operation. type: string enum: - INSTANTIATE - SCALE - SCALE_TO_LEVEL - CHANGE_FLAVOUR - TERMINATE - HEAL - OPERATE - CHANGE_EXT_CONN - MODIFY_INFO - CREATE_SNAPSHOT - REVERT_TO_SNAPSHOT - CHANGE_VNFPKG ProblemDetails: #SOL003 location: 4.3.5.3 description: > The definition of the general "ProblemDetails" data structure from IETF RFC 7807 is reproduced inthis structure. Compared to the general framework defined in IETF RFC 7807, the "status" and "detail" attributes are mandated to be included by the present document, to ensure that the response contains additional textual information about an error. IETF RFC 7807 foresees extensibility of the "ProblemDetails" type. It is possible that particular APIs in the present document, or particular implementations, define extensions to define additional attributes that provide more information about the error. The description column only provides some explanation of the meaning to Facilitate understanding of the design. For a full description, see IETF RFC 7807. type: object required: - status - detail properties: type: description: > A URI reference according to IETF RFC 3986 that identifies the problem type. It is encouraged that the URI provides human-readable documentation for the problem (e.g. using HTML) when dereferenced. When this member is not present, its value is assumed to be "about:blank". type: string format: URI title: description: > A short, human-readable summary of the problem type. It should not change from occurrence to occurrence of the problem, except for purposes of localization. If type is given and other than "about:blank", this attribute shall also be provided. A short, human-readable summary of the problem type. It SHOULD NOT change from occurrence to occurrence of the problem, except for purposes of localization (e.g., using proactive content negotiation; see [RFC7231], Section 3.4). type: string status: description: > The HTTP status code for this occurrence of the problem. The HTTP status code ([RFC7231], Section 6) generated by the origin server for this occurrence of the problem. type: integer detail: description: > A human-readable explanation specific to this occurrence of the problem. type: string instance: description: > A URI reference that identifies the specific occurrence of the problem. It may yield further information if dereferenced. type: string format: URI #TODO: How to express "any additional attributes"? SubscriptionAuthentication: description: > * NOTE: The clientId and clientPassword passed in a subscription shall not be the same as the clientId and clientPassword that are used to obtain authorization for API requests. Client credentials may differ between subscriptions. The value of clientPassword should be generated by a random process type: object required: - authType properties: authType: description: > Defines the types of Authentication / Authorization which the API consumer is willing to accept when receiving a notification. Permitted values: * BASIC: In every HTTP request to the notification endpoint, use HTTP Basic authentication with the client credentials. * OAUTH2_CLIENT_CREDENTIALS: In every HTTP request to the notification endpoint, use an OAuth 2.0 Bearer token, obtained using the client credentials grant type. * TLS_CERT: Every HTTP request to the notification endpoint is sent over a mutually authenticated TLS session, i.e. not only the server is authenticated, but also the client is authenticated during the TLS tunnel setup. type: array items: type: string enum: - BASIC - OAUTH2_CLIENT_CREDENTIALS - TLS_CERT paramsBasic: description: > Parameters for authentication/authorization using BASIC. Shall be present if authType is "BASIC" and the contained information has not been provisioned out of band. Shall be absent otherwise. type: object properties: userName: description: > Username to be used in HTTP Basic authentication. Shall be present if it has not been provisioned out of band. type: string password: description: > Password to be used in HTTP Basic authentication. Shall be present if it has not been provisioned out of band. type: string paramsOauth2ClientCredentials: description: > Parameters for authentication/authorization using OAUTH2_CLIENT_CREDENTIALS. Shall be present if authType is "OAUTH2_CLIENT_CREDENTIALS" and the contained information has not been provisioned out of band. Shall be absent otherwise. type: object properties: clientId: description: > Client identifier to be used in the access token request of the OAuth 2.0 client credentials grant type. Shall be present if it has not been provisioned out of band. See note. type: string clientPassword: description: > Client password to be used in the access token request of the OAuth 2.0 client credentials grant type. Shall be present if it has not been provisioned out of band. See note. type: string tokenEndpoint: description: > The token endpoint from which the access token can be obtained. Shall be present if it has not been provisioned out of band. $ref: "#/definitions/Uri" LcmCoordResultType: description: > The enumeration LcmCoordResultType defines the permitted values to represent the result of executing an LCM coordination action. The coordination result also implies the action to be performed by the VNFM as the follow-up to this coordination. Value | Description ------|------------ CONTINUE | The related LCM operation shall be continued, staying in the state "PROCESSING". ABORT | The related LCM operation shall be aborted by transitioning into the state "FAILED_TEMP". CANCELLED | The coordination action has been cancelled upon request of the API consumer, i.e. the VNFM. The related LCM operation shall be aborted by transitioning into the state "FAILED_TEMP". type: string enum: - CONTINUE - ABORT - CANCELLED LcmOperationForCoordType: description: > The enumeration LcmOperationForCoordType defines the permitted values to represent VNF lifecycle operation types in VNF LCM operation coordination actions. * INSTANTIATE: Represents the "Instantiate VNF" LCM operation. * SCALE: Represents the "Scale VNF" LCM operation. * SCALE_TO_LEVEL: Represents the "Scale VNF to Level" LCM operation. * CHANGE_FLAVOUR: Represents the "Change VNF Flavour" LCM operation. * TERMINATE: Represents the "Terminate VNF" LCM operation. * HEAL: Represents the "Heal VNF" LCM operation. * OPERATE: Represents the "Operate VNF" LCM operation. * CHANGE_EXT_CONN: Represents the "Change external VNF connectivity" LCM operation. * MODIFY_INFO: Represents the "Modify VNF Information" LCM operation. * CREATE_SNAPSHOT: Represents the "Create VNF Snapshot" LCM operation. * REVERT_TO_SNAPSHOT: Represents the "Revert To VNF Snapshot" LCM operation. * CHANGE_VNFPKG: Represents the "Change current VNF package" LCM operation. type: string enum: - INSTANTIATE - SCALE - SCALE_TO_LEVEL - CHANGE_FLAVOUR - TERMINATE - HEAL - OPERATE - CHANGE_EXT_CONN - MODIFY_INFO - CREATE_SNAPSHOT - REVERT_TO_SNAPSHOT - CHANGE_VNFPKG