Commit 93e61acb authored by Michele Carignani's avatar Michele Carignani

YAML files updated to SOL001 v2.6.1.

parent 6bbac9e1
Pipeline #473 failed with stages
tosca_definitions_version: tosca_simple_yaml_1_2
description: ETSI NFV SOL 001 common types definitions version 2.6.1
data_types:
tosca.datatypes.nfv.L2AddressData:
derived_from: tosca.datatypes.Root
description: Describes the information on the MAC addresses to be assigned to a connection point.
properties:
mac_address_assignment:
type: boolean
description: Specifies if the address assignment is the responsibility of management and orchestration function or not. If it is set to True, it is the management and orchestration function responsibility
required: true
tosca.datatypes.nfv.L3AddressData:
derived_from: tosca.datatypes.Root
description: Provides information about Layer 3 level addressing scheme and parameters applicable to a CP
properties:
ip_address_assignment:
type: boolean
description: Specifies if the address assignment is the responsibility of management and orchestration function or not. If it is set to True, it is the management and orchestration function responsibility
required: true
floating_ip_activated:
type: boolean
description: Specifies if the floating IP scheme is activated on the Connection Point or not
required: true
ip_address_type:
type: string
description: Defines address type. The address type should be aligned with the address type supported by the layer_protocols properties of the parent VnfExtCp
required: false
constraints:
- valid_values: [ ipv4, ipv6 ]
number_of_ip_address:
type: integer
description: Minimum number of IP addresses to be assigned
required: false
constraints:
- greater_than: 0
tosca.datatypes.nfv.AddressData:
derived_from: tosca.datatypes.Root
description: Describes information about the addressing scheme and parameters applicable to a CP
properties:
address_type:
type: string
description: Describes the type of the address to be assigned to a connection point. The content type shall be aligned with the address type supported by the layerProtocol property of the connection point
required: true
constraints:
- valid_values: [ mac_address, ip_address ]
l2_address_data:
type: tosca.datatypes.nfv.L2AddressData
description: Provides the information on the MAC addresses to be assigned to a connection point.
required: false
l3_address_data:
type: tosca.datatypes.nfv.L3AddressData
description: Provides the information on the IP addresses to be assigned to a connection point
required: false
tosca.datatypes.nfv.ConnectivityType:
derived_from: tosca.datatypes.Root
description: describes additional connectivity information of a virtualLink
properties:
layer_protocols:
type: list
description: Identifies the protocol a virtualLink gives access to (ethernet, mpls, odu2, ipv4, ipv6, pseudo-wire).The top layer protocol of the virtualLink protocol stack shall always be provided. The lower layer protocols may be included when there are specific requirements on these layers.
required: true
entry_schema:
type: string
constraints:
- valid_values: [ ethernet, mpls, odu2, ipv4, ipv6, pseudo-wire ]
flow_pattern:
type: string
description: Identifies the flow pattern of the connectivity
required: false
constraints:
- valid_values: [ line, tree, mesh ]
tosca.datatypes.nfv.LinkBitrateRequirements:
derived_from: tosca.datatypes.Root
description: describes the requirements in terms of bitrate for a virtual link
properties:
root:
type: integer # in bits per second
description: Specifies the throughput requirement in bits per second of the link (e.g. bitrate of E-Line, root bitrate of E-Tree, aggregate capacity of E-LAN).
required: true
constraints:
- greater_or_equal: 0
leaf:
type: integer # in bits per second
description: Specifies the throughput requirement in bits per second of leaf connections to the link when applicable to the connectivity type (e.g. for E-Tree and E LAN branches).
required: false
constraints:
- greater_or_equal: 0
tosca.datatypes.nfv.CpProtocolData:
derived_from: tosca.datatypes.Root
description: Describes and associates the protocol layer that a CP uses together with other protocol and connection point information
properties:
associated_layer_protocol:
type: string
required: true
description: One of the values of the property layer_protocols of the CP
constraints:
- valid_values: [ ethernet, mpls, odu2, ipv4, ipv6, pseudo-wire ]
address_data:
type: list
description: Provides information on the addresses to be assigned to the CP
entry_schema:
type: tosca.datatypes.nfv.AddressData
required: false
tosca.datatypes.nfv.VnfProfile:
derived_from: tosca.datatypes.Root
description: describes a profile for instantiating VNFs of a particular NS DF according to a specific VNFD and VNF DF.
properties:
instantiation_level:
type: string
description: Identifier of the instantiation level of the VNF DF to be used for instantiation. If not present, the default instantiation level as declared in the VNFD shall be used.
required: false
min_number_of_instances:
type: integer
description: Minimum number of instances of the VNF based on this VNFD that is permitted to exist for this VnfProfile.
required: true
constraints:
- greater_or_equal: 0
max_number_of_instances:
type: integer
description: Maximum number of instances of the VNF based on this VNFD that is permitted to exist for this VnfProfile.
required: true
constraints:
- greater_or_equal: 0
tosca.datatypes.nfv.Qos:
derived_from: tosca.datatypes.Root
description: describes QoS data for a given VL used in a VNF deployment flavour
properties:
latency:
type: scalar-unit.time #Number
description: Specifies the maximum latency
required: true
constraints:
- greater_than: 0 s
packet_delay_variation:
type: scalar-unit.time #Number
description: Specifies the maximum jitter
required: true
constraints:
- greater_or_equal: 0 s
packet_loss_ratio:
type: float
description: Specifies the maximum packet loss ratio
required: false
constraints:
- in_range: [ 0.0, 1.0 ]
capability_types:
tosca.capabilities.nfv.VirtualLinkable:
derived_from: tosca.capabilities.Node
description: A node type that includes the VirtualLinkable capability indicates that it can be pointed by tosca.relationships.nfv.VirtualLinksTo relationship type
relationship_types:
tosca.relationships.nfv.VirtualLinksTo:
derived_from: tosca.relationships.DependsOn
description: Represents an association relationship between the VduCp and VnfVirtualLink node types
valid_target_types: [ tosca.capabilities.nfv.VirtualLinkable ]
node_types:
tosca.nodes.nfv.Cp:
derived_from: tosca.nodes.Root
description: Provides information regarding the purpose of the connection point
properties:
layer_protocols:
type: list
description: Identifies which protocol the connection point uses for connectivity purposes
required: true
entry_schema:
type: string
constraints:
- valid_values: [ ethernet, mpls, odu2, ipv4, ipv6, pseudo-wire ]
role: #Name in ETSI NFV IFA011 v0.7.3: cpRole
type: string
description: Identifies the role of the port in the context of the traffic flow patterns in the VNF or parent NS
required: false
constraints:
- valid_values: [ root, leaf ]
description:
type: string
description: Provides human-readable information on the purpose of the connection point
required: false
protocol:
type: list
description: Provides information on the addresses to be assigned to the connection point(s) instantiated from this Connection Point Descriptor
required: false
entry_schema:
type: tosca.datatypes.nfv.CpProtocolData
trunk_mode:
type: boolean
description: Provides information about whether the CP instantiated from this Cp is in Trunk mode (802.1Q or other), When operating in "trunk mode", the Cp is capable of carrying traffic for several VLANs. Absence of this property implies that trunkMode is not configured for the Cp i.e. It is equivalent to boolean value "false".
required: false
This diff is collapsed.
tosca_definitions_version: tosca_simple_yaml_1_2
description: ETSI NFV SOL 001 pnfd types definitions version 2.5.1
description: ETSI NFV SOL 001 pnfd types definitions version 2.6.1
imports:
- etsi_nfv_sol001_vnfd_types.yaml
- etsi_nfv_sol001_common_types.yaml
data_types:
tosca.datatypes.nfv.L2AddressData:
derived_from: tosca.datatypes.Root
description: Describes the information on the MAC addresses to be assigned to a connection point.
properties:
mac_address_assignment:
type: boolean
description: Specifies if the address assignment is the responsibility of management and orchestration function or not. If it is set to True, it is the management and orchestration function responsibility
required: true
tosca.datatypes.nfv.L3AddressData:
derived_from: tosca.datatypes.Root
description: Provides information about Layer 3 level addressing scheme and parameters applicable to a CP
properties:
ip_address_assignment:
type: boolean
description: Specifies if the address assignment is the responsibility of management and orchestration function or not. If it is set to True, it is the management and orchestration function responsibility
required: true
floating_ip_activated:
type: boolean
description: Specifies if the floating IP scheme is activated on the Connection Point or not
required: true
ip_address_type:
type: string
description: Defines address type. The address type should be aligned with the address type supported by the layer_protocols properties of the parent VnfExtCp
required: false
constraints:
- valid_values: [ ipv4, ipv6 ]
number_of_ip_address:
type: integer
description: Minimum number of IP addresses to be assigned
required: false
constraints:
- greater_than: 0
tosca.datatypes.nfv.AddressData:
derived_from: tosca.datatypes.Root
description: Describes information about the addressing scheme and parameters applicable to a CP
properties:
address_type:
type: string
description: Describes the type of the address to be assigned to a connection point. The content type shall be aligned with the address type supported by the layerProtocol property of the connection point
required: true
constraints:
- valid_values: [ mac_address, ip_address ]
l2_address_data:
type: tosca.datatypes.nfv.L2AddressData
description: Provides the information on the MAC addresses to be assigned to a connection point.
required: false
l3_address_data:
type: tosca.datatypes.nfv.L3AddressData
description: Provides the information on the IP addresses to be assigned to a connection point
required: false
tosca.datatypes.nfv.CpProtocolData:
derived_from: tosca.datatypes.Root
description: Describes and associates the protocol layer that a CP uses together with other protocol and connection point information
properties:
associated_layer_protocol:
type: string
required: true
description: One of the values of the property layer_protocols of the CP
constraints:
- valid_values: [ ethernet, mpls, odu2, ipv4, ipv6, pseudo-wire ]
address_data:
type: list
description: Provides information on the addresses to be assigned to the CP
entry_schema:
type: tosca.datatypes.nfv.AddressData
data_types:
tosca.datatypes.nfv.LocationInfo:
derived_from: tosca.datatypes.Root
description: Represents geographical information on the location where a PNF is deployed.
......@@ -101,52 +32,8 @@ data_types:
type: string # RFC4776
description: caValue as per RFC4776.
required: true
capability_types:
tosca.capabilities.nfv.VirtualLinkable:
derived_from: tosca.capabilities.Node
description: A node type that includes the VirtualLinkable capability indicates that it can be pointed by tosca.relationships.nfv.VirtualLinksTo relationship type
relationship_types:
tosca.relationships.nfv.VirtualLinksTo:
derived_from: tosca.relationships.DependsOn
description: Represents an association relationship between the VNF or PNF or Sap of a Nested NS and NsVirtualLink node types
valid_target_types: [ tosca.capabilities.nfv.VirtualLinkable ]
node_types:
tosca.nodes.nfv.Cp:
derived_from: tosca.nodes.Root
description: Provides information regarding the purpose of the connection point
properties:
layer_protocols:
type: list
description: Identifies which protocol the connection point uses for connectivity purposes
required: true
entry_schema:
type: string
constraints:
- valid_values: [ ethernet, mpls, odu2, ipv4, ipv6, pseudo-wire ]
role: #Name in ETSI NFV IFA011 v0.7.3: cpRole
type: string
description: Identifies the role of the port in the context of the traffic flow patterns in the VNF or parent NS
required: false
constraints:
- valid_values: [ root, leaf ]
description:
type: string
description: Provides human-readable information on the purpose of the connection point
required: false
protocol:
type: list
description: Provides information on the addresses to be assigned to the connection point(s) instantiated from this Connection Point Descriptor
required: true
entry_schema:
type: tosca.datatypes.nfv.CpProtocolData
trunk_mode:
type: boolean
description: Provides information about whether the CP instantiated from this Cp is in Trunk mode (802.1Q or other)
required: true
tosca.nodes.nfv.PNF:
derived_from: tosca.nodes.Root
properties:
......
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment