diff --git a/etsi_nfv_sol001_nsd_2_5_1_types.yaml b/etsi_nfv_sol001_nsd_2_5_1_types.yaml new file mode 100644 index 0000000000000000000000000000000000000000..e332680882c14f546d7a7c49a34ee7660d21a965 --- /dev/null +++ b/etsi_nfv_sol001_nsd_2_5_1_types.yaml @@ -0,0 +1,527 @@ +tosca_definitions_version: tosca_simple_yaml_1_2 +description: ETSI NFV SOL 001 nsd types definitions version 2.5.1 + +imports: + - etsi_nfv_sol001_vnfd_2_5_1_types.yaml + +data_types: + tosca.datatypes.nfv.ServiceAvailability: + derived_from: tosca.datatypes.Root + description: service availability + properties: + level: + type: string + description: service availability levels + required: true + constraints: + - valid_values: [ level1, level2, level3 ] + + tosca.datatypes.nfv.L2AddressData: + derived_from: tosca.datatypes.Root + description: Describes the information on the MAC addresses to be assigned to a connection point. + properties: + mac_address_assignment: + type: boolean + description: Specifies if the address assignment is the responsibility of management and orchestration function or not. If it is set to True, it is the management and orchestration function responsibility + required: true + + tosca.datatypes.nfv.L3AddressData: + derived_from: tosca.datatypes.Root + description: Provides information about Layer 3 level addressing scheme and parameters applicable to a CP + properties: + ip_address_assignment: + type: boolean + description: Specifies if the address assignment is the responsibility of management and orchestration function or not. If it is set to True, it is the management and orchestration function responsibility + required: true + floating_ip_activated: + type: boolean + description: Specifies if the floating IP scheme is activated on the Connection Point or not + required: true + ip_address_type: + type: string + description: Defines address type. The address type should be aligned with the address type supported by the layer_protocols properties of the parent VnfExtCp + required: false + constraints: + - valid_values: [ ipv4, ipv6 ] + number_of_ip_address: + type: integer + description: Minimum number of IP addresses to be assigned + required: false + constraints: + - greater_than: 0 + + tosca.datatypes.nfv.AddressData: + derived_from: tosca.datatypes.Root + description: Describes information about the addressing scheme and parameters applicable to a CP + properties: + address_type: + type: string + description: Describes the type of the address to be assigned to a connection point. The content type shall be aligned with the address type supported by the layerProtocol property of the connection point + required: true + constraints: + - valid_values: [ mac_address, ip_address ] + l2_address_data: + type: tosca.datatypes.nfv.L2AddressData + description: Provides the information on the MAC addresses to be assigned to a connection point. + required: false + l3_address_data: + type: tosca.datatypes.nfv.L3AddressData + description: Provides the information on the IP addresses to be assigned to a connection point + required: false + + tosca.datatypes.nfv.ConnectivityType: + derived_from: tosca.datatypes.Root + description: describes additional connectivity information of a virtualLink + properties: + layer_protocols: + type: list + description: Identifies the protocol a virtualLink gives access to (ethernet, mpls, odu2, ipv4, ipv6, pseudo-wire).The top layer protocol of the virtualLink protocol stack shall always be provided. The lower layer protocols may be included when there are specific requirements on these layers. + required: true + entry_schema: + type: string + constraints: + - valid_values: [ ethernet, mpls, odu2, ipv4, ipv6, pseudo-wire ] + flow_pattern: + type: string + description: Identifies the flow pattern of the connectivity + required: false + constraints: + - valid_values: [ line, tree, mesh ] + + tosca.datatypes.nfv.NsVlProfile: + derived_from: tosca.datatypes.Root + description: Describes additional instantiation data for a given NsVirtualLink used in a specific NS deployment flavour. + properties: + max_bitrate_requirements: + type: tosca.datatypes.nfv.LinkBitrateRequirements + description: Specifies the maximum bitrate requirements for a VL instantiated according to this profile. + required: true + min_bitrate_requirements: + type: tosca.datatypes.nfv.LinkBitrateRequirements + description: Specifies the minimum bitrate requirements for a VL instantiated according to this profile. + required: true + qos: + type: tosca.datatypes.nfv.NsVirtualLinkQos + description: Specifies the QoS requirements of a VL instantiated according to this profile. + required: false + service_availability: + type: tosca.datatypes.nfv.ServiceAvailability + description: Network service virtual link service availability levels, as described in ETSI GS NFV-REL 001 + required: false + + tosca.datatypes.nfv.VirtualLinkProtocolData: + derived_from: tosca.datatypes.Root + description: describes one protocol layer and associated protocol data for a given virtual link used in a specific VNF deployment flavour + properties: + associated_layer_protocol: + type: string + description: Identifies one of the protocols a virtualLink gives access to (ethernet, mpls, odu2, ipv4, ipv6, pseudo-wire) as specified by the connectivity_type property. + required: true + constraints: + - valid_values: [ ethernet, mpls, odu2, ipv4, ipv6, pseudo-wire ] + l2_protocol_data: + type: tosca.datatypes.nfv.L2ProtocolData + description: Specifies the L2 protocol data for a virtual link. Shall be present when the associatedLayerProtocol attribute indicates a L2 protocol and shall be absent otherwise. + required: false + l3_protocol_data: + type: tosca.datatypes.nfv.L3ProtocolData + description: Specifies the L3 protocol data for this virtual link. Shall be present when the associatedLayerProtocol attribute indicates a L3 protocol and shall be absent otherwise. + required: false + + tosca.datatypes.nfv.L2ProtocolData: + derived_from: tosca.datatypes.Root + description: describes L2 protocol data for a given virtual link used in a specific VNF deployment flavour. + properties: + name: + type: string + description: Identifies the network name associated with this L2 protocol. + required: false + network_type: + type: string + description: Specifies the network type for this L2 protocol.The value may be overridden at run-time. + required: false + constraints: + - valid_values: [ flat, vlan, vxlan, gre ] + vlan_transparent: + type: boolean + description: Specifies whether to support VLAN transparency for this L2 protocol or not. + required: false + default: false + mtu: + type: integer + description: Specifies the maximum transmission unit (MTU) value for this L2 protocol. + required: false + constraints: + - greater_than: 0 + + tosca.datatypes.nfv.L3ProtocolData: + derived_from: tosca.datatypes.Root + description: describes L3 protocol data for a given virtual link used in a specific VNF deployment flavour. + properties: + name: + type: string + description: Identifies the network name associated with this L3 protocol. + required: false + ip_version: + type: string + description: Specifies IP version of this L3 protocol.The value of the ip_version property shall be consistent with the value of the layer_protocol in the connectivity_type property of the virtual link node. + required: true + constraints: + - valid_values: [ ipv4, ipv6 ] + cidr: + type: string + description: Specifies the CIDR (Classless Inter-Domain Routing) of this L3 protocol. The value may be overridden at run-time. + required: true + ip_allocation_pools: + type: list + description: Specifies the allocation pools with start and end IP addresses for this L3 protocol. The value may be overridden at run-time. + required: false + entry_schema: + type: tosca.datatypes.nfv.IpAllocationPool + gateway_ip: + type: string + description: Specifies the gateway IP address for this L3 protocol. The value may be overridden at run-time. + required: false + dhcp_enabled: + type: boolean + description: Indicates whether DHCP (Dynamic Host Configuration Protocol) is enabled or disabled for this L3 protocol. The value may be overridden at run-time. + required: false + ipv6_address_mode: + type: string + description: Specifies IPv6 address mode. May be present when the value of the ipVersion attribute is "ipv6" and shall be absent otherwise. The value may be overridden at run-time. + required: false + constraints: + - valid_values: [ slaac, dhcpv6-stateful, dhcpv6-stateless ] + + tosca.datatypes.nfv.IpAllocationPool: + derived_from: tosca.datatypes.Root + description: Specifies a range of IP addresses + properties: + start_ip_address: + type: string + description: The IP address to be used as the first one in a pool of addresses derived from the cidr block full IP range + required: true + end_ip_address: + type: string + description: The IP address to be used as the last one in a pool of addresses derived from the cidr block full IP range + required: true + + tosca.datatypes.nfv.LinkBitrateRequirements: + derived_from: tosca.datatypes.Root + description: describes the requirements in terms of bitrate for a virtual link + properties: + root: + type: integer # in bits per second + description: Specifies the throughput requirement in bits per second of the link (e.g. bitrate of E-Line, root bitrate of E-Tree, aggregate capacity of E-LAN). + required: true + constraints: + - greater_or_equal: 0 + leaf: + type: integer # in bits per second + description: Specifies the throughput requirement in bits per second of leaf connections to the link when applicable to the connectivity type (e.g. for E-Tree and E LAN branches). + required: false + constraints: + - greater_or_equal: 0 + + tosca.datatypes.nfv.NsVirtualLinkQos: + derived_from: tosca.datatypes.nfv.Qos + description: describes QoS data for a given VL used in a VNF deployment flavour + properties: + priority: + type: integer + description: Specifies the priority level in case of congestion on the underlying physical links + required: false + + tosca.datatypes.nfv.CpProtocolData: + derived_from: tosca.datatypes.Root + description: Describes and associates the protocol layer that a CP uses together with other protocol and connection point information + properties: + associated_layer_protocol: + type: string + required: true + description: One of the values of the property layer_protocols of the CP + constraints: + - valid_values: [ ethernet, mpls, odu2, ipv4, ipv6, pseudo-wire ] + address_data: + type: list + description: Provides information on the addresses to be assigned to the CP + entry_schema: + type: tosca.datatypes.nfv.AddressData + + tosca.datatypes.nfv.VnfProfile: + derived_from: tosca.datatypes.Root + description: describes a profile for instantiating VNFs of a particular NS DF according to a specific VNFD and VNF DF. + properties: + instantiation_level: + type: string + description: Identifier of the instantiation level of the VNF DF to be used for instantiation. If not present, the default instantiation level as declared in the VNFD shall be used. + required: false + min_number_of_instances: + type: integer + description: Minimum number of instances of the VNF based on this VNFD that is permitted to exist for this VnfProfile. + required: true + constraints: + - greater_or_equal: 0 + max_number_of_instances: + type: integer + description: Maximum number of instances of the VNF based on this VNFD that is permitted to exist for this VnfProfile. + required: true + constraints: + - greater_or_equal: 0 + + tosca.datatypes.nfv.Qos: + derived_from: tosca.datatypes.Root + description: describes QoS data for a given VL used in a VNF deployment flavour + properties: + latency: + type: scalar-unit.time #Number + description: Specifies the maximum latency + required: true + constraints: + - greater_than: 0 s + packet_delay_variation: + type: scalar-unit.time #Number + description: Specifies the maximum jitter + required: true + constraints: + - greater_or_equal: 0 s + packet_loss_ratio: + type: float + description: Specifies the maximum packet loss ratio + required: false + constraints: + - in_range: [ 0.0, 1.0 ] + +capability_types: + tosca.capabilities.nfv.VirtualLinkable: + derived_from: tosca.capabilities.Node + description: A node type that includes the VirtualLinkable capability indicates that it can be pointed by tosca.relationships.nfv.VirtualLinksTo relationship type + +relationship_types: + tosca.relationships.nfv.VirtualLinksTo: + derived_from: tosca.relationships.DependsOn + description: Represents an association relationship between the VNF or PNF or Sap of a Nested NS and NsVirtualLink node types + valid_target_types: [ tosca.capabilities.nfv.VirtualLinkable ] + +interface_types: + tosca.interfaces.nfv.Nslcm: + derived_from: tosca.interfaces.Root + description: This interface encompasses a set of TOSCA operations corresponding to NS LCM operations defined in ETSI GS NFV-IFA 013. as well as to preamble and postamble procedures to the execution of the NS LCM operations. + instantiate_start: + description: Preamble to execution of the instantiate operation + instantiate: + description: Base procedure for instantiating an NS, corresponding to the Instantiate NS operation defined in GS NFV-IFA 013. + instantiate_end: + description: Postamble to the execution of the instantiate operation + terminate_start: + description: Preamble to execution of the terminate operation + terminate: + description: Base procedure for terminating an NS, corresponding to the Terminate NS operation defined in GS NFV-IFA 013. + terminate _end: + description: Postamble to the execution of the terminate operation + update_start: + description: Preamble to execution of the update operation + update: + description: Base procedure for updating an NS, corresponding to the Update NS operation defined in GS NFV-IFA 013. + update_end: + description: Postamble to the execution of the update operation + scale_start: + description: Preamble to execution of the scale operation + scale: + description: Base procedure for scaling an NS, corresponding to the Scale NS operation defined in GS NFV-IFA 013. + scale _end: + description: Postamble to the execution of the scale operation + heal_start: + description: Preamble to execution of the heal operation + heal: + description: Base procedure for healing an NS, corresponding to the Heal NS operation defined in GS NFV-IFA 013. + heal _end: + description: Postamble to the execution of the heal operation +group_types: + tosca.groups.nfv.PlacementGroup: + derived_from: tosca.groups.Root + description: PlacementGroup is used for describing the affinity or anti-affinity relationship applicable between VNF instances created using different VNFDs, the Virtual Link instances created using different VLDs or the nested NS instances created using different NSDs + properties: + description: + type: string + description: Human readable description of the group + required: true + members: [ tosca.nodes.nfv.VNF, tosca.nodes.nfv.NsVirtualLink, tosca.nodes.nfv.NS ] + +node_types: + tosca.nodes.nfv.Cp: + derived_from: tosca.nodes.Root + description: Provides information regarding the purpose of the connection point + properties: + layer_protocols: + type: list + description: Identifies which protocol the connection point uses for connectivity purposes + required: true + entry_schema: + type: string + constraints: + - valid_values: [ ethernet, mpls, odu2, ipv4, ipv6, pseudo-wire ] + role: #Name in ETSI NFV IFA011 v0.7.3: cpRole + type: string + description: Identifies the role of the port in the context of the traffic flow patterns in the VNF or parent NS + required: false + constraints: + - valid_values: [ root, leaf ] + description: + type: string + description: Provides human-readable information on the purpose of the connection point + required: false + protocol: + type: list + description: Provides information on the addresses to be assigned to the connection point(s) instantiated from this Connection Point Descriptor + required: true + entry_schema: + type: tosca.datatypes.nfv.CpProtocolData + trunk_mode: + type: boolean + description: Provides information about whether the CP instantiated from this Cp is in Trunk mode (802.1Q or other) + required: true + + tosca.nodes.nfv.NS: + derived_from: tosca.nodes.Root + properties: + descriptor_id: + type: string # GUID + description: Identifier of this NS descriptor + required: true + designer: + type: string + description: Identifies the designer of the NSD. + required: true + version: + type: string + description: Identifies the version of the NSD. + required: true + name: + type: string + description: Provides the human readable name of the NSD. + required: true + invariant_id: + type: string + description: Identifies an NSD in a version independent manner. This attribute is invariant across versions of NSD. + required: true + requirements: + - virtual_link: + capability: tosca.capabilities.nfv.VirtualLinkable + relationship: tosca.relationships.nfv.VirtualLinksTo + node: tosca.nodes.nfv.NsVirtualLink + occurrences: [ 0, 1 ] + interfaces: + Nslcm: + type: tosca.interfaces.nfv.Nslcm + + + tosca.nodes.nfv.Sap: + derived_from: tosca.nodes.nfv.Cp + description: node definition of SAP. + requirements: + - external_virtual_link: + capability: tosca.capabilities.nfv.VirtualLinkable + relationship: tosca.relationships.nfv.VirtualLinksTo + - internal_virtual_link: + capability: tosca.capabilities.nfv.VirtualLinkable + relationship: tosca.relationships.nfv.VirtualLinksTo + + tosca.nodes.nfv.NsVirtualLink: + derived_from: tosca.nodes.Root + description: node definition of Virtual Links + properties: + vl_profile: + type: tosca.datatypes.nfv.NsVlProfile # only covers min/max bitrate requirements + description: Specifies instantiation parameters for a virtual link of a particular NS deployment flavour. + required: true + connectivity_type: + type: tosca.datatypes.nfv.ConnectivityType + required: true + test_access: + type: list + description: Test access facilities available on the VL + required: false + entry_schema: + type: string + constraints: + - valid_values: [ passive_monitoring, active_loopback ] + description: + type: string + required: false + description: Human readable information on the purpose of the virtual link (e.g. VL for control plane traffic). + capabilities: + virtual_linkable: + type: tosca.capabilities.nfv.VirtualLinkable + +policy_types: + tosca.policies.nfv.AffinityRule: + derived_from: tosca.policies.Placement + description: The AffinityRule describes the affinity rules applicable for the defined targets + properties: + scope: + type: string + description: scope of the rule is an NFVI_node, an NFVI_PoP, etc. + required: true + constraints: + - valid_values: [ nfvi_node, zone, zone_group, nfvi_pop ] + targets: [ tosca.nodes.nfv.VNF, tosca.nodes.nfv.NsVirtualLink, tosca.nodes.nfv.NS, tosca.groups.nfv.PlacementGroup ] + + tosca.policies.nfv.AntiAffinityRule: + derived_from: tosca.policies.Placement + description: The AntiAffinityRule describes the anti-affinity rules applicable for the defined targets + properties: + scope: + type: string + description: scope of the rule is an NFVI_node, an NFVI_PoP, etc. + required: true + constraints: + - valid_values: [ nfvi_node, zone, zone_group, nfvi_pop ] + targets: [ tosca.nodes.nfv.VNF, tosca.nodes.nfv.NsVirtualLink, tosca.nodes.nfv.NS, tosca.groups.nfv.PlacementGroup ] + + tosca.policies.nfv.SecurityGroupRule: + derived_from: tosca.policies.Root + description: The SecurityGroupRule type is a policy type specified the matching criteria for the ingress and/or egress traffic to/from visited connection points as defined in ETSI GS NFV-IFA 011 [1]. + properties: + description: + type: string + description: Human readable description of the security group rule. + required: false + direction: + type: string + description: The direction in which the security group rule is applied. The direction of 'ingress' or 'egress' is specified against the associated CP. I.e., 'ingress' means the packets entering a CP, while 'egress' means the packets sent out of a CP. + required: false + constraints: + - valid_values: [ ingress, egress ] + default: ingress + ether_type: + type: string + description: Indicates the protocol carried over the Ethernet layer. + required: false + constraints: + - valid_values: [ ipv4, ipv6 ] + default: ipv4 + protocol: + type: string + description: Indicates the protocol carried over the IP layer. Permitted values include any protocol defined in the IANA protocol registry, e.g. TCP, UDP, ICMP, etc. + required: false + constraints: + - valid_values: [ hopopt, icmp, igmp, ggp, ipv4, st, tcp, cbt, egp, igp, bbn_rcc_mon, nvp_ii, pup, argus, emcon, xnet, chaos, udp, mux, dcn_meas, hmp, prm, xns_idp, trunk_1, trunk_2, leaf_1, leaf_2, rdp, irtp, iso_tp4, netblt, mfe_nsp, merit_inp, dccp, 3pc, idpr, xtp, ddp, idpr_cmtp, tp++, il, ipv6, sdrp, ipv6_route, ipv6_frag, idrp, rsvp, gre, dsr, bna, esp, ah, i_nlsp, swipe, narp, mobile, tlsp, skip, ipv6_icmp, ipv6_no_nxt, ipv6_opts, cftp, sat_expak, kryptolan, rvd, ippc, sat_mon, visa, ipcv, cpnx, cphb, wsn, pvp, br_sat_mon, sun_nd, wb_mon, wb_expak, iso_ip, vmtp, secure_vmtp, vines, ttp, iptm, nsfnet_igp, dgp, tcf, eigrp, ospfigp, sprite_rpc, larp, mtp, ax.25, ipip, micp, scc_sp, etherip, encap, gmtp, ifmp, pnni, pim, aris, scps, qnx, a/n, ip_comp, snp, compaq_peer, ipx_in_ip, vrrp, pgm, l2tp, ddx, iatp, stp, srp, uti, smp, sm, ptp, isis, fire, crtp, crudp, sscopmce, iplt, sps, pipe, sctp, fc, rsvp_e2e_ignore, mobility, udp_lite, mpls_in_ip, manet, hip, shim6, wesp, rohc ] + default: tcp + port_range_min: + type: integer + description: Indicates minimum port number in the range that is matched by the security group rule. If a value is provided at design-time, this value may be overridden at run-time based on other deployment requirements or constraints. + required: false + constraints: + - greater_or_equal: 0 + - less_or_equal: 65535 + default: 0 + port_range_max: + type: integer + description: Indicates maximum port number in the range that is matched by the security group rule. If a value is provided at design-time, this value may be overridden at run-time based on other deployment requirements or constraints. + required: false + constraints: + - greater_or_equal: 0 + - less_or_equal: 65535 + default: 65535 + targets: [ tosca.nodes.nfv.Sap ]