Commit c89ca560 authored by canterburym's avatar canterburym

TS 102 232-3 v3.7.1 (2017-11-23) agreed at LI#46 (Rotterdam, 2017-10-03)

parent 62bb5824
Pipeline #4134 failed with stage
in 6 seconds
IPAccessPDU
{itu-t(0) identified-organization(4) etsi(0) securityDomain(2) lawfulIntercept(2) li-ps(5) iPAccess(3) version12(12)}
{itu-t(0) identified-organization(4) etsi(0) securityDomain(2) lawfulIntercept(2) li-ps(5) iPAccess(3) version13(13)}
DEFINITIONS IMPLICIT TAGS ::=
BEGIN
IMPORTS
-- from ETSI TS 101 671 [1]
IPAddress
FROM HI2Operations
{itu-t(0) identified-organization(4) etsi(0) securityDomain(2) lawfulIntercept(2) hi2(1) version18(18)}
-- from ETSI TS 102 232-1 [2]
IPAddress
Location
FROM LI-PS-PDU
{itu-t(0) identified-organization(4) etsi(0) securityDomain(2) lawfulIntercept(2) li-ps(5) genHeader(1) version24(24)};
{itu-t(0) identified-organization(4) etsi(0) securityDomain(2) lawfulIntercept(2) li-ps(5) genHeader(1) version26(26)};
-- ============================
-- Object Identifier Definition
-- ============================
iPIRIObjId RELATIVE-OID ::= {li-ps(5) iPAccess(3) version12(12) iRI(1)}
iPCCObjId RELATIVE-OID ::= {li-ps(5) iPAccess(3) version12(12) cC(2)}
iPIRIOnlyObjId RELATIVE-OID ::= {li-ps(5) iPAccess(3) version12(12) iRIOnly(3)}
iPIRIObjId RELATIVE-OID ::= {li-ps(5) iPAccess(3) version13(13) iRI(1)}
iPCCObjId RELATIVE-OID ::= {li-ps(5) iPAccess(3) version13(13) cC(2)}
iPIRIOnlyObjId RELATIVE-OID ::= {li-ps(5) iPAccess(3) version13(13) iRIOnly(3)}
-- all three definitions relative to {itu-t(0) identified-organization(4)
-- etsi(0) securityDomain(2) lawfulintercept(2)}
......@@ -110,8 +106,14 @@ IPIRIContents ::= SEQUENCE
-- This parameter will carry the second and subsequent IPv4 or IPv6 target IP addresses
-- It is used when multiple subnet/prefix ranges are assigned to a target service.
-- Use of this field is fully described in section 6.2.1
location [24] Location OPTIONAL
location [24] Location OPTIONAL,
-- The location associated with the target
pOPPortID [25] OCTET STRING OPTIONAL,
-- This field will carry the NAS-Port-ID as defined in RFC 2869 [17]:
-- This parameter shall be populated with the RADIUS value.
framedRoutes [26] SEQUENCE OF FramedRoute OPTIONAL
-- It is used to list all the available Framed Route and Framed IPv6 Route information
}
......@@ -124,7 +126,7 @@ AccessEventType ::= ENUMERATED
accessReject(2),
-- IAS access is refused to the target
accessFailed(3),
-- The accessAttempt timed-out or failed otherwise
-- The Access_attempt timed-out or failed otherwise
sessionStart(4),
-- A target starts using the IAS; not in use anymore from version 4(4)
sessionEnd(5),
......@@ -245,6 +247,19 @@ OtherTargetIdentifiers ::= CHOICE
...
}
FramedRoute ::= CHOICE
{
-- Additional Framed Route prefix information associated with the target service
framedRoute [0] OCTET STRING,
-- This could contain an IPv4 as well as IPv6 FramedRoute information
-- including additional information such Gateway address and
-- one or more metrics in texual format.
-- This parameter shall be populated with the RADIUS value.
...
}
-- =====================================================
-- Intercept-related information for IRI-Only intercepts
-- =====================================================
......
IPAccessPDU
{itu-t(0) identified-organization(4) etsi(0) securityDomain(2) lawfulIntercept(2) li-ps(5) iPAccess(3) version12(12)}
{itu-t(0) identified-organization(4) etsi(0) securityDomain(2) lawfulIntercept(2) li-ps(5) iPAccess(3) version13(13)}
DEFINITIONS IMPLICIT TAGS ::=
BEGIN
IMPORTS
-- from ETSI TS 101 671 [1]
IPAddress
FROM HI2Operations
{itu-t(0) identified-organization(4) etsi(0) securityDomain(2) lawfulIntercept(2) hi2(1) version18(18)}
-- from ETSI TS 102 232-1 [2]
IPAddress
Location
FROM LI-PS-PDU
{itu-t(0) identified-organization(4) etsi(0) securityDomain(2) lawfulIntercept(2) li-ps(5) genHeader(1) version24(24)};
{itu-t(0) identified-organization(4) etsi(0) securityDomain(2) lawfulIntercept(2) li-ps(5) genHeader(1) version26(26)};
-- ============================
-- Object Identifier Definition
-- ============================
iPIRIObjId RELATIVE-OID ::= {li-ps(5) iPAccess(3) version12(12) iRI(1)}
iPCCObjId RELATIVE-OID ::= {li-ps(5) iPAccess(3) version12(12) cC(2)}
iPIRIOnlyObjId RELATIVE-OID ::= {li-ps(5) iPAccess(3) version12(12) iRIOnly(3)}
iPIRIObjId RELATIVE-OID ::= {li-ps(5) iPAccess(3) version13(13) iRI(1)}
iPCCObjId RELATIVE-OID ::= {li-ps(5) iPAccess(3) version13(13) cC(2)}
iPIRIOnlyObjId RELATIVE-OID ::= {li-ps(5) iPAccess(3) version13(13) iRIOnly(3)}
-- all three definitions relative to {itu-t(0) identified-organization(4)
-- etsi(0) securityDomain(2) lawfulintercept(2)}
......@@ -110,8 +106,14 @@ IPIRIContents ::= SEQUENCE
-- This parameter will carry the second and subsequent IPv4 or IPv6 target IP addresses
-- It is used when multiple subnet/prefix ranges are assigned to a target service.
-- Use of this field is fully described in section 6.2.1
location [24] Location OPTIONAL
location [24] Location OPTIONAL,
-- The location associated with the target
pOPPortID [25] OCTET STRING OPTIONAL,
-- This field will carry the NAS-Port-ID as defined in RFC 2869 [17]:
-- This parameter shall be populated with the RADIUS value.
framedRoutes [26] SEQUENCE OF FramedRoute OPTIONAL
-- It is used to list all the available Framed Route and Framed IPv6 Route information
}
......@@ -124,7 +126,7 @@ AccessEventType ::= ENUMERATED
accessReject(2),
-- IAS access is refused to the target
accessFailed(3),
-- The accessAttempt timed-out or failed otherwise
-- The Access_attempt timed-out or failed otherwise
sessionStart(4),
-- A target starts using the IAS; not in use anymore from version 4(4)
sessionEnd(5),
......@@ -245,6 +247,19 @@ OtherTargetIdentifiers ::= CHOICE
...
}
FramedRoute ::= CHOICE
{
-- Additional Framed Route prefix information associated with the target service
framedRoute [0] OCTET STRING,
-- This could contain an IPv4 as well as IPv6 FramedRoute information
-- including additional information such Gateway address and
-- one or more metrics in texual format.
-- This parameter shall be populated with the RADIUS value.
...
}
-- =====================================================
-- Intercept-related information for IRI-Only intercepts
-- =====================================================
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment