diff --git a/102232-1/HI1NotificationOperations.asn b/102232-1/HI1NotificationOperations.asn new file mode 100644 index 0000000000000000000000000000000000000000..c17136dee9b00b6e92c5184c38839f9a6240c7b9 --- /dev/null +++ b/102232-1/HI1NotificationOperations.asn @@ -0,0 +1,151 @@ +HI1NotificationOperations +{itu-t(0) identified-organization(4) etsi(0) securityDomain(2) lawfulIntercept(2) hi1(0) notificationOperations(1) version7(7)} + +-- This ASN.1 module was previously provided by TS 101 671, +-- which was marked as historical in V3.15.1 (2018-06). +-- +-- This ASN.1 module has been copied from TS 101 671 V3.15.1 to +-- TS 102 232-1 (the present document) to assist implementors of LI-PS-PDU. +-- The ASN.1 in this module shall be equivalent to that in TS 101 671 +-- so that the ASN.1 encodes identically. +-- +-- The types based on ITU-T X.880 ROSE have been disabled because they're not +-- required by LI-PS-PDU or modules imported by LI-PS-PDU. +-- +-- Due to the historical status of ETSI TS 101 671 it is not possible to update +-- this module. Do not use it in future change requests. + +DEFINITIONS IMPLICIT TAGS ::= +BEGIN + +IMPORTS + +-- Start of disable of ITU-T X.880 ROSE +-- +-- OPERATION, +-- ERROR +-- FROM Remote-Operations-Information-Objects +-- {joint-iso-itu-t(2) remote-operations(4) informationObjects(5) version1(0)} +-- +-- End of disable of ITU-T X.880 ROSE + + CommunicationIdentifier, + TimeStamp, + LawfulInterceptionIdentifier + FROM HI2Operations + {itu-t(0) identified-organization(4) etsi(0) securityDomain(2) lawfulIntercept(2) hi2(1) version10(10)}; + +-- ============================= +-- Object Identifier Definitions +-- ============================= + +-- LawfulIntercept DomainId +lawfulInterceptDomainId OBJECT IDENTIFIER ::= {itu-t(0) identified-organization(4) etsi(0) securityDomain(2) lawfulIntercept(2)} + +-- hi1 Domain +hi1NotificationOperationsId OBJECT IDENTIFIER ::= {lawfulInterceptDomainId hi1(0) notificationOperations(1)} +hi1OperationId OBJECT IDENTIFIER ::= {hi1NotificationOperationsId version6(6)} + + +-- Start of disable of ITU-T X.880 ROSE +-- +-- sending-of-HI1-Notification OPERATION ::= +-- { +-- ARGUMENT HI1-Operation +-- ERRORS {ErrorHI1Notifications} +-- CODE global:{hi1NotificationOperationsId version1(1)} +-- } +-- Class 2 operation. The timer shall be set to a value between 3s and 240s. +-- The timer default value is 60s. +-- NOTE: The value for this timer is to be set on the equipment waiting for the returned message; +-- its value shall be agreed between the NWO/AP/SvP and the LEA, depending on their equipment +-- properties. +-- +-- other-failure-causes ERROR ::= {CODE local:0} +-- missing-parameter ERROR ::= {CODE local:1} +-- unknown-parameter ERROR ::= {CODE local:2} +-- erroneous-parameter ERROR ::= {CODE local:3} +-- +-- ErrorHI1Notifications ERROR ::= +-- { +-- other-failure-causes | +-- missing-parameter | +-- unknown-parameter | +-- erroneous-parameter +-- } +-- +-- End of disable of ITU-T X.880 ROSE + + +HI1-Operation ::= CHOICE +{ + liActivated [1] Notification, + liDeactivated [2] Notification, + liModified [3] Notification, + alarms-indicator [4] Alarm-Indicator, + ..., + national-HI1-ASN1parameters [5] National-HI1-ASN1parameters +} + +-- ================== +-- PARAMETERS FORMATS +-- ================== + +Notification ::= SEQUENCE +{ + domainID [0] OBJECT IDENTIFIER (hi1OperationId) OPTIONAL, + -- Once using FTP delivery mechanism + lawfulInterceptionIdentifier [1] LawfulInterceptionIdentifier, + -- This identifier is the LIID identity provided with the lawful authorization + -- for each target. + communicationIdentifier [2] CommunicationIdentifier OPTIONAL, + -- Only the NWO/PA/SvPIdentifier is provided (the one provided with the Lawful + -- authorization). + -- Called "callIdentifier" in V1.1.1 of TS 101 671 + timeStamp [3] TimeStamp, + -- date and time of the report. + ..., + national-HI1-ASN1parameters [5] National-HI1-ASN1parameters OPTIONAL, + target-Information [6] OCTET STRING (SIZE (1..256)) OPTIONAL + -- provides information about the number or the characteristic of the target + -- (e.g. E-mail address, E.164 number), ASCII format +} + +Alarm-Indicator ::= SEQUENCE +{ + domainID [0] OBJECT IDENTIFIER (hi1OperationId) OPTIONAL, + -- Once using FTP delivery mechanism + communicationIdentifier [1] CommunicationIdentifier OPTIONAL, + -- Only the NWO/PA/SvPIdentifier is provided (the one provided with the + -- Lawful authorization) + timeStamp [2] TimeStamp, + -- date and time of the report. + alarm-information [3] OCTET STRING (SIZE (1..256)), + -- Provides information about alarms (free format). + -- Until ASN.1 version 6 (TS 101 671 V3.12.1) the octet string + -- was limited to a size of 25 + ..., + lawfulInterceptionIdentifier [4] LawfulInterceptionIdentifier OPTIONAL, + -- This identifier is the LIID identity provided with the lawful authorization + -- for each target in according to national law. + national-HI1-ASN1parameters [5] National-HI1-ASN1parameters OPTIONAL +} + +National-HI1-ASN1parameters ::= SEQUENCE +{ + domainID [0] OBJECT IDENTIFIER (hi1OperationId) OPTIONAL, + -- Once using FTP delivery mechanism. + countryCode [1] PrintableString (SIZE (2)), + -- Country Code according to ISO 3166-1, + -- the country to which the parameters inserted after the extension marker apply. + ... + -- In case a given country wants to use additional national parameters according to its law, + -- these national parameters should be defined using the ASN.1 syntax and added after the + -- extension marker (...). + -- It is recommended that "version parameter" and "vendor identification parameter" are + -- included in the national parameters definition. Vendor identifications can be + -- retrieved from IANA web site (see annex K). Besides, it is recommended to avoid + -- using tags from 240 to 255 in a formal type definition. +} + +END -- end of HI1NotificationOperations diff --git a/102232-1/HI2Operations.asn b/102232-1/HI2Operations.asn new file mode 100644 index 0000000000000000000000000000000000000000..4dcf260ca3a7b0dc67e3489ebe99290857ea1ffb --- /dev/null +++ b/102232-1/HI2Operations.asn @@ -0,0 +1,1067 @@ +HI2Operations +{itu-t(0) identified-organization(4) etsi(0) securityDomain(2) lawfulIntercept(2) hi2(1) version17(18)} + +-- This ASN.1 module was previously provided by TS 101 671, +-- which was marked as historical in V3.15.1 (2018-06). +-- +-- This ASN.1 module has been copied from TS 101 671 V3.15.1 to +-- TS 102 232-1 (the present document) to assist implementors of LI-PS-PDU. +-- The ASN.1 in this module shall be equivalent to that in TS 101 671 +-- so that the ASN.1 encodes identically. +-- +-- The types based on ITU-T X.880 ROSE have been disabled because they're not +-- required by LI-PS-PDU or modules imported by LI-PS-PDU. +-- +-- Due to the historical status of ETSI TS 101 671 it is not possible to update +-- this module. Do not use it in future change requests. + +-- It is advised not to use version11(11) of this ASN.1 module since it contains a syntax error. +-- Version11(11) of HI2Operations is only defined in TS 101 671 v3.5.1. + +DEFINITIONS IMPLICIT TAGS ::= + +BEGIN + +IMPORTS + +-- Start of disable of ITU-T X.880 ROSE +-- +-- OPERATION, +-- ERROR +-- FROM Remote-Operations-Information-Objects +-- {joint-iso-itu-t(2) remote-operations(4) informationObjects(5) version1(0)} +-- +-- End of disable of ITU-T X.880 ROSE + + -- from 3GPP TS 33.108 + UmtsQos, + IMSevent, + LDIevent, + CorrelationValues + FROM UmtsHI2Operations + {itu-t(0) identified-organization(4) etsi(0) securityDomain(2) lawfulintercept(2) threeGPP(4) hi2(1) r11(11) version-0(0)} + + -- from TS 101 909-20-1 + TARGETACTIVITYMONITOR-1 + FROM TS101909201 + {itu-t(0) identified-organization(4) etsi(0) ts101909(1909) part20(20) subpart1(1) interceptVersion(0)} + + -- from EN 301 040 + TARGETACTIVITYMONITORind, + TARGETCOMMSMONITORind, + TTRAFFICind, + CTTRAFFICind + FROM EN301040 + {itu-t(0) identified-organization(4) etsi(0) en301040 (1040) interceptVersion (0)}; + +-- ============================= +-- Object Identifier Definitions +-- ============================= + +-- LawfulIntercept DomainId +lawfulInterceptDomainId OBJECT IDENTIFIER ::= {itu-t(0) identified-organization(4) etsi(0) securityDomain(2) lawfulIntercept(2)} + +-- Security Subdomains +hi2DomainId OBJECT IDENTIFIER ::= {lawfulInterceptDomainId hi2(1)} +hi2OperationId OBJECT IDENTIFIER ::= {hi2DomainId version18(18)} + + +-- Start of disable of ITU-T X.880 ROSE +-- +-- sending-of-IRI OPERATION ::= +-- { +-- ARGUMENT IRIsContent +-- ERRORS {OperationErrors} +-- CODE global:{hi2DomainId sending-of-IRI(1) version1(1)} +-- } +-- Class 2 operation. The timer shall be set to a value between 3s and 240s. +-- The timer default value is 60s. +-- NOTE: The same note as for HI management operation applies. +-- +-- End of disable of ITU-T X.880 ROSE + + +IRIsContent ::= CHOICE +{ + iRIContent IRIContent, + iRISequence IRISequence +} + +IRISequence ::= SEQUENCE OF IRIContent + -- Aggregation of IRIContent is an optional feature. + -- It may be applied in cases when at a given point in time several IRI records are + -- available for delivery to the same LEA destination. + -- As a general rule, records created at any event shall be sent immediately and shall + -- not held in the DF or MF in order to apply aggregation. + -- When aggregation is not to be applied, IRIContent needs to be chosen. + +IRIContent ::= CHOICE +{ + iRI-Begin-record [1] IRI-Parameters, + -- At least one optional parameter must be included within the iRI-Begin-Record. + iRI-End-record [2] IRI-Parameters, + iRI-Continue-record [3] IRI-Parameters, + -- At least one optional parameter must be included within the iRI-Continue-Record. + iRI-Report-record [4] IRI-Parameters, + -- At least one optional parameter must be included within the iRI-Report-Record. + ... +} + + +-- Start of disable of ITU-T X.880 ROSE +-- +-- unknown-version ERROR ::= {CODE local:0} +-- missing-parameter ERROR ::= {CODE local:1} +-- unknown-parameter-value ERROR ::= {CODE local:2} +-- unknown-parameter ERROR ::= {CODE local:3} +-- +-- OperationErrors ERROR ::= +-- { +-- unknown-version | +-- missing-parameter | +-- unknown-parameter-value | +-- unknown-parameter +-- } +-- These values may be sent by the LEMF, when an operation or a parameter is misunderstood. +-- +-- End of disable of ITU-T X.880 ROSE + + +IRI-Parameters ::= SEQUENCE +{ + domainID [0] OBJECT IDENTIFIER (hi2OperationId) OPTIONAL, + -- for the sending entity the inclusion of the Object Identifier is mandatory + iRIversion [23] ENUMERATED + { + version2(2), + ..., + version3(3), + version4(4), + version5(5), + version6(6), + version7(7), + lastVersion(8) + } OPTIONAL, + -- Optional parameter "iRIversion" (tag 23) is redundant starting + -- from TS 101 671 v2.5.1 + -- where to the object identifier "domainID" was introduced into IRI-Parameters. + -- In order to keep backward compatibility, even when the version of the "domainID" + -- parameter will be incremented it is recommended to always send to LEMF the same: + -- enumeration value "lastVersion(8)". + -- if not present, it means version 1 is handled + lawfulInterceptionIdentifier [1] LawfulInterceptionIdentifier, + -- This identifier is associated to the target. + communicationIdentifier [2] CommunicationIdentifier, + -- used to uniquely identify an intercepted call. + -- Called "callIdentifier" in v1.1.1 of TS 101 671 + timeStamp [3] TimeStamp, + -- date and time of the event triggering the report. + intercepted-Call-Direct [4] ENUMERATED + { + not-Available(0), + originating-Target(1), + -- In case of GPRS, this indicates that the PDP context activation, modification + -- or deactivation is MS requested. + terminating-Target(2), + -- In case of GPRS, this indicates that the PDP context activation, modification + -- or deactivation is network initiated. + ... + } OPTIONAL, + intercepted-Call-State [5] Intercepted-Call-State OPTIONAL, + ringingDuration [6] OCTET STRING (SIZE (3)) OPTIONAL, + -- Duration in seconds. BCD coded: HHMMSS + conversationDuration [7] OCTET STRING (SIZE (3)) OPTIONAL, + -- Duration in seconds. BCD coded: HHMMSS + locationOfTheTarget [8] Location OPTIONAL, + -- location of the target subscriber + partyInformation [9] SET SIZE (1..10) OF PartyInformation OPTIONAL, + -- This parameter provides the concerned party (Originating, Terminating or forwarded + -- party), the identity(ies) of the party and all the information provided by the party. + callContentLinkInformation [10] SEQUENCE + { + cCLink1Characteristics [1] CallContentLinkCharacteristics OPTIONAL, + -- Information concerning the Content of Communication Link Tx channel established + -- toward the LEMF (or the sum signal channel, in case of mono mode). + cCLink2Characteristics [2] CallContentLinkCharacteristics OPTIONAL, + -- Information concerning the Content of Communication Link Rx channel established + -- toward the LEMF. + ... + } OPTIONAL, + release-Reason-Of-Intercepted-Call [11] OCTET STRING (SIZE (2)) OPTIONAL, + -- Release cause coded in Recommendation ITU-T Q.850 format. + -- This parameter indicates the reason why the intercepted call cannot be established or + -- why the intercepted call has been released after the active phase. + nature-Of-The-intercepted-call [12] ENUMERATED + { + -- Nature of the intercepted "call": + gSM-ISDN-PSTN-circuit-call(0), + -- the possible UUS content is sent through the HI2 or HI3 "data" interface + -- the possible call content call is established through the HI3 "circuit" interface + gSM-SMS-Message(1), + -- the SMS content is sent through the HI2 or HI3 "data" interface + uUS4-Messages(2), + -- the UUS content is sent through the HI2 or HI3 "data" interface + tETRA-circuit-call(3), + -- the possible call content call is established through the HI3 "circuit" interface + -- the possible data are sent through the HI3 "data" interface + teTRA-Packet-Data(4), + -- the data are sent through the HI3 "data" interface + gPRS-Packet-Data(5), + -- the data are sent through the HI3 "data" interface + ..., + uMTS-circuit-call(6), + -- the possible call content call is established through the HI3 "circuit" interface + -- the possible data are sent through the HI3 "data" interface + lTE-SMS-Message(7), + -- indicator for SMS from LTE handset + -- the SMS content is sent through the HI2 or HI3 "data" interface + lTE-circuit-call(8) + -- indicator for CS call from LTE handset +} OPTIONAL, + serverCenterAddress [13] PartyInformation OPTIONAL, + -- e.g. in case of SMS message this parameter provides the address of the relevant + -- server within the calling (if server is originating) or called + -- (if server is terminating) party address parameters + sMS [14] SMS-report OPTIONAL, + -- this parameter provides the SMS content and associated information + cC-Link-Identifier [15] CC-Link-Identifier OPTIONAL, + -- Depending on a network option, this parameter may be used to identify a CC link + -- in case of multiparty calls. + national-Parameters [16] National-Parameters OPTIONAL, + gPRSCorrelationNumber [18] GPRSCorrelationNumber OPTIONAL, + gPRSevent [20] GPRSEvent OPTIONAL, + -- This information is used to provide particular action of the target + -- such as attach/detach + sgsnAddress [21] DataNodeAddress OPTIONAL, + gPRSOperationErrorCode [22] GPRSOperationErrorCode OPTIONAL, + ..., + ggsnAddress [24] DataNodeAddress OPTIONAL, + qOS [25] UmtsQos OPTIONAL, + -- This parameter is duplicated from 3GPP TS 33.108. + networkIdentifier [26] Network-Identifier OPTIONAL, + -- This parameter is duplicated from 3GPP TS 33.108. + sMSOriginatingAddress [27] DataNodeAddress OPTIONAL, + -- This parameter is duplicated from 3GPP TS 33.108. + sMSTerminatingAddress [28] DataNodeAddress OPTIONAL, + -- This parameter is duplicated from 3GPP TS 33.108. + iMSevent [29] IMSevent OPTIONAL, + sIPMessage [30] OCTET STRING OPTIONAL, + -- This parameter is duplicated from 3GPP TS 33.108. + servingSGSN-number [31] OCTET STRING (SIZE (1..20)) OPTIONAL, + -- This parameter is duplicated from 3GPP TS 33.108. + servingSGSN-address [32] OCTET STRING (SIZE (5..17)) OPTIONAL, + -- Octets are coded according to 3GPP TS 23.003 + -- This parameter is duplicated from 3GPP TS 33.108. + tARGETACTIVITYMONITOR [33] TARGETACTIVITYMONITOR-1 OPTIONAL, + -- Parameter is used in TS 101 909-20-1 + ldiEvent [34] LDIevent OPTIONAL, + -- The "Location Dependent Interception" parameter is duplicated from 3GPP TS 33.108 + correlation [35] CorrelationValues OPTIONAL, + -- This parameter is duplicated from 3GPP TS 33.108 + tARGETACTIVITYMONITORind [36] TARGETACTIVITYMONITORind OPTIONAL, + -- Parameter is used in EN 301 040 + tARGETCOMMSMONITORind [37] TARGETCOMMSMONITORind OPTIONAL, + -- Parameter is used in EN 301 040 + tTRAFFICind [38] TTRAFFICind OPTIONAL, + -- Parameter is used in EN 301 040 + cTTRAFFICind [39] CTTRAFFICind OPTIONAL, + -- Parameter is used in EN 301 040 + servingSystem [40] Network-Element-Identifier OPTIONAL, + -- Parameter identifies the visited network element + national-HI2-ASN1parameters [255] National-HI2-ASN1parameters OPTIONAL +} + +-- ================== +-- PARAMETERS FORMATS +-- ================== + +CommunicationIdentifier ::= SEQUENCE +{ + communication-Identity-Number [0] OCTET STRING (SIZE (1..8)) OPTIONAL, + -- Temporary Identifier of an intercepted call to uniquely identify an intercepted call + -- within the node. This parameter is mandatory if there is associated + -- information sent over HI3interface (CClink, data,..) or when + -- CommunicationIdentifier is used for IRI other than IRI-Report-record + -- This parameter was called "call-Identity-Number" in V1.1.1 of TS 101 671 + -- The individual digits of the communication-Identity-Number shall be represented in + -- ASCII format, e.g. "12345678" = 8 octets 0x31 0x32 0x33 0x34 0x35 0x36 0x37 0x38. + -- For subaddress option only "0"..."9" shall be used. + network-Identifier [1] Network-Identifier, + ... +} +-- NOTE: The same "CommunicationIdentifier" value is sent: +-- with the HI3 information for correlation purpose between the IRI and the information sent +-- on the HI3 interfaces (CCLink, data, ..) with each IRI associated to a same intercepted +-- call for correlation purpose between the different IRI. + +Network-Identifier ::= SEQUENCE +{ + operator-Identifier [0] OCTET STRING (SIZE (1..5)), + -- It is a notification of the NWO/AP/SvP in ASCII- characters. + -- For subaddress option only "0"..."9" shall be used. + -- The parameter is mandatory. + network-Element-Identifier [1] Network-Element-Identifier OPTIONAL, + ... +} + +Network-Element-Identifier ::= CHOICE +{ + e164-Format [1] OCTET STRING (SIZE (1..25)), + -- E164 address of the node in international format. Coded in the same format as the + -- calling party number parameter of the ISUP (parameter part: EN 300 356). + x25-Format [2] OCTET STRING (SIZE (1..25)), + -- X25 address + iP-Format [3] OCTET STRING (SIZE (1..25)), + -- IP address + dNS-Format [4] OCTET STRING (SIZE (1..25)), + -- DNS address + ..., + iP-Address [5] IPAddress +} + +CC-Link-Identifier ::= OCTET STRING (SIZE (1..8)) + -- Depending on a network option, this parameter may be used to identify a CClink + -- in case of multiparty calls. + -- The individual digits of the CC-Link-Identifier shall be represented in + -- ASCII format, e.g. "12345678" = 8 octets 0x31 0x32 0x33 0x34 0x35 0x36 0x37 0x38. + -- For subaddress option only "0"..."9" shall be used. + +TimeStamp ::= CHOICE +{ +-- The minimum resolution required is one second. +-- "Resolution" is the smallest incremental change that can be measured for time and +-- is expressed with a definite number of decimal digits or bits. + localTime [0] LocalTimeStamp, + utcTime [1] UTCTime +} + +LocalTimeStamp ::= SEQUENCE +{ + generalizedTime [0] GeneralizedTime, + -- The minimum resolution required is one second. + -- "Resolution" is the smallest incremental change that can be measured for time and + -- is expressed with a definite number of decimal digits or bits. + winterSummerIndication [1] ENUMERATED + { + notProvided(0), + winterTime(1), + summerTime(2), + ... + } +} + +PartyInformation ::= SEQUENCE +{ + party-Qualifier [0] ENUMERATED + { + originating-Party(0), + -- In this case, the partyInformation parameter provides the identities related to + -- the originating party and all information provided by this party. + -- This parameter provides also all the information concerning the redirecting + -- party when a forwarded call reaches a target. + terminating-Party(1), + -- In this case, the partyInformation parameter provides the identities related to + -- the terminating party and all information provided by this party. + forwarded-to-Party(2), + -- In this case, the partyInformation parameter provides the identities related to + -- the forwarded to party and parties beyond this one and all information + -- provided by this parties, including the call forwarding reason. + gPRS-Target(3), + ... + }, + partyIdentity [1] SEQUENCE + { + imei [1] OCTET STRING (SIZE (8)) OPTIONAL, + -- See MAP format 3GPP TS 29.002 + tei [2] OCTET STRING (SIZE (1..15)) OPTIONAL, + -- ISDN-based Terminal Equipment Identity + imsi [3] OCTET STRING (SIZE (3..8)) OPTIONAL, + -- See MAP format 3GPP TS 29.002 International Mobile + -- Station Identity E.212 number beginning with Mobile Country Code + callingPartyNumber [4] CallingPartyNumber OPTIONAL, + -- The calling party format is used to transmit the identity of a calling party + calledPartyNumber [5] CalledPartyNumber OPTIONAL, + -- The called party format is used to transmit the identity of a called party or + -- a forwarded to party. + msISDN [6] OCTET STRING (SIZE (1..9)) OPTIONAL, + -- MSISDN of the target, encoded in the same format as the AddressString + -- parameters defined in MAP format 3GPP TS 29.002 + ..., + e164-Format [7] OCTET STRING (SIZE (1..25)) OPTIONAL, + -- E164 address of the node in international format. Coded in the same format as + -- the calling party number parameter of the ISUP (parameter part: EN 300 356) + sip-uri [8] OCTET STRING OPTIONAL, + -- Session Initiation Protocol - Uniform Resource Identifier. See IETF RFC 3261. + -- This parameter is duplicated from 3GPP TS 33.108. + tel-url [9] OCTET STRING OPTIONAL, + -- See "URLs for Telephone Calls", IETF RFC 3966. + -- This parameter is duplicated from 3GPP TS 33.108. + party-Validity [10] ENUMERATED + { + trusted(0), + -- The operator has assured the party identity + untrusted(1), + -- The operator does not assure the party identity + operator-added(2), + -- The party identity is added by the operator, e.g. the roaming number + ... + } OPTIONAL, + alphanumeric [11] UTF8String OPTIONAL + -- see TS 101 671 clause A.3.3 on usage of this parameter + }, + services-Information [2] Services-Information OPTIONAL, + -- This parameter is used to transmit all the information concerning the + -- complementary information associated to the basic call + supplementary-Services-Information [3] Supplementary-Services OPTIONAL, + -- This parameter is used to transmit all the information concerning the + -- activation/invocation of supplementary services during a call or out-of call not + -- provided by the previous parameters. + services-Data-Information [4] Services-Data-Information OPTIONAL, + -- This parameter is used to transmit all the information concerning the complementary + -- information associated to the basic data call. + ... +} + +CallingPartyNumber ::= CHOICE +{ + iSUP-Format [1] OCTET STRING (SIZE (1..25)), + -- Encoded in the same format as the calling party number (parameter field) + -- of the ISUP (see EN 300 356). + dSS1-Format [2] OCTET STRING (SIZE (1..25)), + -- Encoded in the format defined for the value part of the Calling party number + -- information element of DSS1 protocol EN 300 403-1. + -- The DSS1 Information element identifier and the DSS1 length are not included. + ..., + mAP-Format [3] OCTET STRING (SIZE (1..25)) + -- Encoded as AddressString of the MAP protocol 3GPP TS 29.002. +} + +CalledPartyNumber ::= CHOICE +{ + iSUP-Format [1] OCTET STRING (SIZE (1..25)), + -- Encoded in the same format as the called party number (parameter field) + -- of the ISUP (see EN 300 356). + mAP-Format [2] OCTET STRING (SIZE (1..25)), + -- Encoded as AddressString of the MAP protocol 3GPP TS 29.002. + dSS1-Format [3] OCTET STRING (SIZE (1..25)), + -- Encoded in the format defined for the value part of the Called party number information + -- element of DSS1 protocol EN 300 403-1. + -- The DSS1 Information element identifier and the DSS1 length are not included. + ... +} + +Location ::= SEQUENCE +{ + e164-Number [1] OCTET STRING (SIZE (1..25)) OPTIONAL, + -- Coded in the same format as the ISUP location number (parameter field) + -- of the ISUP (see EN 300 356). + globalCellID [2] OCTET STRING (SIZE (5..7)) OPTIONAL, + -- See MAP format (see 3GPP TS 29.002). + tetraLocation [3] TetraLocation OPTIONAL, + -- This optional parameter is not in use anymore, but is kept for backwards compatibility. + rAI [4] OCTET STRING (SIZE (6)) OPTIONAL, + -- The Routeing Area Identifier (RAI) in the current SGSN is coded in accordance with + -- 3GPP TS 24.008 without the Routing Area Identification IEI (only the + -- last 6 octets are used). + gsmLocation [5] GSMLocation OPTIONAL, + umtsLocation [6] UMTSLocation OPTIONAL, + sAI [7] OCTET STRING (SIZE (7)) OPTIONAL, + -- format: PLMN-ID 3 octets (no. 1-3), + -- LAC 2 octets (no. 4-5), + -- SAC 2 octets (no. 6-7) + -- (according to 3GPP TS 25.413). + ..., + oldRAI [8] OCTET STRING (SIZE (6)) OPTIONAL, + -- the "Routeing Area Identifier" in the old SGSN is coded in accordance with + -- 3GPP TS 24.008 without the Routing Area Identification IEI + -- (only the last 6 octets are used). + -- This parameter is duplicated from 3GPP TS 33.108. + tAI [9] OCTET STRING (SIZE (6)) OPTIONAL, + -- The "Tracking Area Identity" (TAI) is coded in accordance with 3GPP TS 29.118 + -- without the TAI IEI. + -- The tAI parameter is applicable only to the CS traffic cases where the available + -- location information is the one received from the Mobility Management Entity (MME). + -- This parameter is duplicated from 3GPP TS 33.108. + eCGI [10] OCTET STRING (SIZE (8)) OPTIONAL + -- the "E-UTRAN Cell Global Identity" (E-CGI) is coded in accordance with + -- 3GPP TS 29.118 without the E-CGI IEI. + -- The eCGI parameter is applicable only to the CS traffic cases where + -- the available location information is the one received from the MME. + -- This parameter is duplicated from 3GPP TS 33.108. +} + +TetraLocation ::= CHOICE + -- This optional parameter is not in use anymore, but is kept for backwards compatibility. +{ + ms-Loc [1] SEQUENCE + { + mcc [1] INTEGER (0..1023), + -- 10 bits EN 300 392-1 + mnc [2] INTEGER (0..16383), + -- 14 bits EN 300 392-1 + lai [3] INTEGER (0..65535), + -- 14 bits EN 300 392-1 + ci [4] INTEGER OPTIONAL + }, + ls-Loc [2] INTEGER +} + +GSMLocation ::= CHOICE +{ + geoCoordinates [1] SEQUENCE + { + latitude [1] PrintableString (SIZE(7..10)), + -- format: XDDMMSS.SS + longitude [2] PrintableString (SIZE(8..11)), + -- format: XDDDMMSS.SS + mapDatum [3] MapDatum DEFAULT wGS84, + ..., + azimuth [4] INTEGER (0..359) OPTIONAL + -- The azimuth is the bearing, relative to true north + }, + -- format: XDDDMMSS.SS + -- X : N(orth), S(outh), E(ast), W(est) + -- DD or DDD : degrees (numeric characters) + -- MM : minutes (numeric characters) + -- SS.SS : seconds, the second part (.SS) is optional + -- Example: + -- latitude short form N502312 + -- longitude long form E1122312.18 + + utmCoordinates [2] SEQUENCE + { + utm-East [1] PrintableString (SIZE(10)), + utm-North [2] PrintableString (SIZE(7)), + -- Universal Transverse Mercator + -- example utm-East 32U0439955 + -- utm-North 5540736 + mapDatum [3] MapDatum DEFAULT wGS84, + ..., + azimuth [4] INTEGER (0..359) OPTIONAL + -- The azimuth is the bearing, relative to true north + }, + + utmRefCoordinates [3] SEQUENCE + { + utmref-string PrintableString (SIZE(13)), + mapDatum MapDatum DEFAULT wGS84, + ... + }, + -- example 32UPU91294045 + + wGS84Coordinates [4] OCTET STRING + -- format is as defined in 3GPP TS 23.032 +} + +MapDatum ::= ENUMERATED +{ + wGS84, + -- World Geodetic System 1984 + wGS72, + eD50, + -- European Datum 50 + ... +} + +UMTSLocation ::= CHOICE +{ + point [1] GA-Point, + pointWithUnCertainty [2] GA-PointWithUnCertainty, + polygon [3] GA-Polygon, + ... +} + +GeographicalCoordinates ::= SEQUENCE +{ + latitudeSign ENUMERATED + { + north, + south + }, + latitude INTEGER (0..8388607), + longitude INTEGER (-8388608..8388607), + ... +} + +GA-Point ::= SEQUENCE +{ + geographicalCoordinates GeographicalCoordinates, + ... +} + +GA-PointWithUnCertainty ::=SEQUENCE +{ + geographicalCoordinates GeographicalCoordinates, + uncertaintyCode INTEGER (0..127) +} + +maxNrOfPoints INTEGER ::= 15 + +GA-Polygon ::= SEQUENCE (SIZE (1..maxNrOfPoints)) OF + SEQUENCE + { + geographicalCoordinates GeographicalCoordinates, + ... + } + +CallContentLinkCharacteristics ::= SEQUENCE +{ + cCLink-State [1] CCLink-State OPTIONAL, + -- current state of the CCLink + release-Time [2] TimeStamp OPTIONAL, + -- date and time of the release of the Call Content Link. + release-Reason [3] OCTET STRING (SIZE(2)) OPTIONAL, + -- Release cause coded in Recommendation ITU-T Q.850 format + lEMF-Address [4] CalledPartyNumber OPTIONAL, + -- Directory number used to route the call toward the LEMF + ... +} + +CCLink-State ::= ENUMERATED +{ + setUpInProcess(1), + -- The set-up of the call is in process + callActive(2), + callReleased(3), + lack-of-resource(4), + -- The lack-of-resource state is sent when a CC Link cannot + -- be established because of lack of resource at the MF level. + ... +} + +Intercepted-Call-State ::= ENUMERATED +{ + idle(1), + -- When the intercept call is released, the state is IDLE and the reason is provided + -- by the release-Reason-Of-Intercepted-Call parameter. + setUpInProcess(2), + -- The set-up of the call is in process + connected(3), + -- The answer has been received + ... +} + +Services-Information ::= SEQUENCE +{ + iSUP-parameters [1] ISUP-parameters OPTIONAL, + dSS1-parameters-codeset-0 [2] DSS1-parameters-codeset-0 OPTIONAL, + ..., + mAP-parameters [3] MAP-parameters OPTIONAL +} + +ISUP-parameters ::= SET SIZE (1..256) OF OCTET STRING (SIZE (1..256)) + -- Each "OCTET STRING" contains one additional ISUP parameter TLV coded not already defined in + -- the previous parameters. The Tag value is the one given in EN 300 356. + + -- In version 1 of the present document "iSUP-parameters" is defined as mandatory. + -- It might occur that no ISUP parameter is available. In that case in a version 1 + -- implementation the value "zero" may be included in the first octet string of the SET. + + -- The Length and the Value are coded in accordance with the parameter definition in + -- EN 300 356. Hereafter are listed the main parameters. + -- However other parameters may be added: + + -- Transmission medium requirement: format defined in EN 300 356. + -- This parameter can be provided with the "Party Information" of the "calling party". + + -- Transmission medium requirement prime: format defined in EN 300 356. + -- This parameter can be provided with the "Party Information" of the "calling party". + +DSS1-parameters-codeset-0 ::= SET SIZE (1..256) OF OCTET STRING (SIZE (1..256)) + -- Each "OCTET STRING" contains one DSS1 parameter of the codeset-0. The parameter is coded as + -- described in EN 300 403-1 (The DSS1 Information element identifier and the DSS1 length + -- are included). Hereafter are listed the main parameters. + -- However other parameters may be added: + + -- Bearer capability: this parameter may be repeated. Format defined in EN 300 403-1. + -- This parameter can be provided with the "Party Information" of the "calling party", + -- "called party" or "forwarded to party". + + -- High Layer Compatibility: this parameter may be repeated. Format defined in EN 300 403-1 + -- This parameter can be provided with the "Party Information" of the "calling party", + -- "called party" or "forwarded to party". + + -- Low Layer capability: this parameter may be repeated. Format defined in EN 300 403-1. + -- This parameter can be provided with the "Party Information" of the "calling party", + -- "called party" or "forwarded to party". + +MAP-parameters ::= SET SIZE (1..256) OF OCTET STRING (SIZE(1..256)) + -- Each "OCTET STRING" contains one MAP parameter. The parameter is coded as described in + -- 3GPP TS 29.002 (The map-TS-Code is included). + +Supplementary-Services ::= SEQUENCE +{ + standard-Supplementary-Services [1] Standard-Supplementary-Services OPTIONAL, + non-Standard-Supplementary-Services [2] Non-Standard-Supplementary-Services OPTIONAL, + other-Services [3] Other-Services OPTIONAL, + ... +} + +Standard-Supplementary-Services ::= SEQUENCE +{ + iSUP-SS-parameters [1] ISUP-SS-parameters OPTIONAL, + dSS1-SS-parameters-codeset-0 [2] DSS1-SS-parameters-codeset-0 OPTIONAL, + dSS1-SS-parameters-codeset-4 [3] DSS1-SS-parameters-codeset-4 OPTIONAL, + dSS1-SS-parameters-codeset-5 [4] DSS1-SS-parameters-codeset-5 OPTIONAL, + dSS1-SS-parameters-codeset-6 [5] DSS1-SS-parameters-codeset-6 OPTIONAL, + dSS1-SS-parameters-codeset-7 [6] DSS1-SS-parameters-codeset-7 OPTIONAL, + dSS1-SS-Invoke-components [7] DSS1-SS-Invoke-Components OPTIONAL, + mAP-SS-Parameters [8] MAP-SS-Parameters OPTIONAL, + mAP-SS-Invoke-Components [9] MAP-SS-Invoke-Components OPTIONAL, + ... +} + +Non-Standard-Supplementary-Services ::= SET SIZE (1..20) OF CHOICE +{ + simpleIndication [1] SimpleIndication, + sciData [2] SciDataMode, + ... +} + +Other-Services ::= SET SIZE (1..50) OF OCTET STRING (SIZE (1..256)) + -- Reference manufacturer manuals. + +ISUP-SS-parameters ::= SET SIZE (1..256) OF OCTET STRING (SIZE (1..256)) + -- It must be noticed this parameter is retained for compatibility reasons. + -- It is recommended not to use it in new work but to use ISUP-parameters parameter. + + -- Each "OCTET STRING" contains one additional ISUP parameter TLV coded not already defined in + -- the previous parameters. The Tag value is the one given in EN 300 356. + -- The Length and the Value are coded in accordance with the parameter definition in + -- EN 300 356. Hereafter are listed the main parameters. + -- However other parameters may be added: + + -- Connected Number: format defined in EN 300 356. + -- This parameter can be provided with the "Party Information" of the + -- "called party" or "forwarded to party". + + -- RedirectingNumber: format defined in EN 300 356. + -- This parameter can be provided with the "Party Information" of the "originating party" + -- or/and of the "terminating party". + + -- Original Called Party Number: format defined in EN 300 356. + -- This parameter can be provided with the "Party Information" of the "originating party". + + -- Redirection information: format defined in EN 300 356. + -- This parameter can be provided with the "Party Information" of the + -- "originating party", "forwarded to party" or/and "Terminating party". + + -- Redirection Number: format defined in EN 300 356. + -- This parameter can be provided with the "Party Information" of the + -- "forwarded to party" or "Terminating party". + + -- Call diversion information: format defined in EN 300 356. + -- This parameter can be provided with the "Party Information" of the + -- "forwarded to party" or "Terminating party". + + -- Generic Number: format defined in EN 300 356. + -- This parameter can be provided with the "Party Information" of the + -- "calling party", "called party" or "forwarded to party". + -- This parameters are used to transmit additional identities (additional, calling party + -- number, additional called number, etc.). + + -- Generic Notification: format defined in EN 300 356. + -- This parameter may be provided with the "Party Information" of the + -- "calling party", "called party" or "forwarded to party". + -- This parameters transmit the notification to the other part of the call of the supplementary + -- services activated or invoked by a subscriber during the call. + + -- CUG Interlock Code: format defined in EN 300 356. + -- This parameter can be provided with the "Party Information" of the "calling party". + +DSS1-SS-parameters-codeset-0 ::= SET SIZE (1..256) OF OCTET STRING (SIZE (1..256)) + -- Each "OCTET STRING" contains one DSS1 parameter of the codeset-0. The parameter is coded as + -- described in EN 300 403-1 (The DSS1 Information element identifier and the DSS1 length + -- are included). Hereafter are listed the main parameters. + -- However other parameters may be added: + + -- Calling Party Subaddress: format defined in EN 300 403-1. + -- This parameter can be provided with the "Party Information" of the "calling party". + + -- Called Party Subaddress: format defined in EN 300 403-1. + -- This parameter can be provided with the "Party Information" of the "calling party". + + -- Connected Subaddress: format defined in recommendation (see EN 300 097-1). + -- This parameter can be provided with the "Party Information" of the + -- "called party" or "forwarded to party". + + -- Connected Number: format defined in recommendation (see EN 300 097-1). + -- This parameter can be provided with the "Party Information" of the + -- "called party" or "forwarded to party". + + -- Keypad facility: format defined in EN 300 403-1. + -- This parameter can be provided with the "Party Information" of the + -- "calling party", "called party" or "forwarded to party". + + -- Called Party Number: format defined in EN 300 403-1. + -- This parameter could be provided with the "Party Information" of the "calling party" + -- when target is the originating party; it contains the dialled digits before modification + -- at network level (e.g. IN interaction, translation, etc ...). + + -- User-user: format defined in EN 300 286-1). + -- This parameter can be provided with the "Party Information" of the + -- "calling party", "called party" or "forwarded to party". + +DSS1-SS-parameters-codeset-4 ::= SET SIZE (1..256) OF OCTET STRING (SIZE (1..256)) + -- Each "OCTET STRING" contains one DSS1 parameter of the codeset-4. The parameter is coded as + -- described in the relevant recommendation. + +DSS1-SS-parameters-codeset-5 ::= SET SIZE (1..256) OF OCTET STRING (SIZE (1..256)) + -- Each "OCTET STRING" contains one DSS1 parameter of the codeset-5. The parameter is coded as + -- described in the relevant national recommendation. + +DSS1-SS-parameters-codeset-6 ::= SET SIZE (1..256) OF OCTET STRING (SIZE (1..256)) + -- Each "OCTET STRING" contains one DSS1 parameter of the codeset-6. The parameter is coded as + -- described in the relevant local network recommendation. + +DSS1-SS-parameters-codeset-7 ::= SET SIZE (1..256) OF OCTET STRING (SIZE (1..256)) + -- Each "octet string" contains one DSS1 parameter of the codeset-7. The parameter is coded as + -- described in the relevant user specific recommendation. + +DSS1-SS-Invoke-Components ::= SET SIZE (1..256) OF OCTET STRING (SIZE (1..256)) + -- Each "octet string" contains one DSS1 Invoke or Return Result component. + -- The invoke or return result component is coded as + -- described in the relevant DSS1 supplementary service recommendation. + + -- Invoke or Return Result component (BeginCONF): EN 300 185-1 + -- Invoke or Return Result component (AddCONF): EN 300 185-1 + -- Invoke or Return Result component (SplitCONF): EN 300 185-1 + -- Invoke or Return Result component (DropCONF): EN 300 185-1 + -- Invoke or Return Result component (IsolateCONF): EN 300 185-1 + -- Invoke or Return Result component (ReattachCONF): EN 300 185-1 + -- Invoke or Return Result component (PartyDISC): EN 300 185-1 + -- Invoke or Return Result component (MCIDRequest): EN 300 130-1 + -- Invoke or Return Result component (Begin3PTY): EN 300 188-1 + -- Invoke or Return Result component (End3PTY): EN 300 188-1 + -- Invoke or Return Result component (ECTExecute): EN 300 369-1 + -- Invoke or Return Result component (ECTInform): EN 300 369-1 + -- Invoke or Return Result component (ECTLinkIdRequest): EN 300 369-1 + -- Invoke or Return Result component (ECTLoopTest): EN 300 369-1 + -- Invoke or Return Result component (ExplicitECTExecute): EN 300 369-1 + -- Invoke or Return Result component (ECT: RequestSubaddress): EN 300 369-1 + -- Invoke or Return Result component (ECT: SubaddressTransfer): EN 300 369-1 + -- Invoke or Return Result component (CF: ActivationDiversion): EN 300 207-1 + -- Invoke or Return Result component (CF: DeactivationDiversion): EN 300 207-1 + -- Invoke or Return Result component (CF: ActivationStatusNotification): EN 300 207-1 + -- Invoke or Return Result component (CF: DeactivationStatusNotification): EN 300 207-1 + -- Invoke or Return Result component (CF: InterrogationDiversion): EN 300 207-1 + -- Invoke or Return Result component (CF: InterrogationServedUserNumber): EN 300 207-1 + -- Invoke or Return Result component (CF: DiversionInformation): EN 300 207-1 + -- Invoke or Return Result component (CF: CallDeflection): EN 300 207-1 + -- Invoke or Return Result component (CF: CallRerouteing): EN 300 207-1 + -- Invoke or Return Result component (CF: DivertingLegInformation1): EN 300 207-1 + -- Invoke or Return Result component (CF: DivertingLegInformation2): EN 300 207-1 + -- Invoke or Return Result component (CF: DivertingLegInformation3): EN 300 207-1 + -- other invoke or return result components ... + +MAP-SS-Invoke-Components ::= SET SIZE (1..256) OF OCTET STRING (SIZE (1..256)) + -- Each "octet string" contains one MAP Invoke or Return Result component. + -- The invoke or return result component is coded as + -- described in the relevant MAP supplementary service recommendation. + +MAP-SS-Parameters ::= SET SIZE (1..256) OF OCTET STRING (SIZE (1..256)) + -- Each "octet string" contains one MAP Parameter. The parameter is coded as + -- described in the relevant MAP supplementary service recommendation. + +SimpleIndication ::= ENUMERATED +{ + call-Waiting-Indication(0), + -- The target has received a call waiting indication for this call + add-conf-Indication(1), + -- this call has been added to a conference + call-on-hold-Indication(2), + -- indication that this call is on hold + retrieve-Indication(3), + -- indication that this call has been retrieved + suspend-Indication(4), + -- indication that this call has been suspended + resume-Indication(5), + -- indication that this call has been resumed + answer-Indication(6), + -- indication that this call has been answered + ... +} + +SciDataMode ::= OCTET STRING (SIZE (1..256)) + +SMS-report ::= SEQUENCE +{ + communicationIdentifier [1] CommunicationIdentifier, + -- used to uniquely identify an intercepted call: the same used for the + -- relevant IRI + -- Called "callIdentifier" in V1.1.1 of TS 101 671 + timeStamp [2] TimeStamp, + -- date and time of the report. The format is + -- the one defined in case a) of the ASN.1 Recommendation ITU-T X.680. + -- (year month day hour minutes seconds) + sMS-Contents [3] SEQUENCE + { + initiator [1] ENUMERATED + { + -- party which sent the SMS + target(0), + server(1), + undefined-party(2), + ... + }, + transfer-status [2] ENUMERATED + { + succeed-transfer(0), + --the transfer of the SMS message succeeds + not-succeed-transfer(1), + undefined(2), + ... + } OPTIONAL, + other-message [3] ENUMERATED + { + -- In case of terminating call, indicates if the server will send other SMS. + yes(0), + no(1), + undefined(2), + ... + } OPTIONAL, + content [4] OCTET STRING (SIZE (1..270)) OPTIONAL, + -- Encoded in the format defined for the SMS mobile. + -- The content and enhancedContent fields are mutually exclusive. + -- The content field is dedicated for 3GPP purposes. + ..., + enhancedContent [5] SEQUENCE + { + content [1] OCTET STRING, + -- The character encoding used in the content field is specified in the + -- character-encoding field. + character-encoding [2] ENUMERATED + { + gsm-7-bit-ascii(0), + eight-bit-ascii(1), + eight-bit-binary(2), + ucs-2(3), + utf-8(4), + utf-16(5), + other(6), + ... + } + } OPTIONAL + } +} + +LawfulInterceptionIdentifier ::= OCTET STRING (SIZE (1..25)) + -- It is recommended to use ASCII characters in "a"..."z", "A"..."Z", "-", "_", ".", and "0"..."9". + -- For subaddress option only "0"..."9" shall be used. + +National-Parameters ::= SET SIZE (1..40) OF OCTET STRING (SIZE (1..256)) + -- Content defined by national law. + +GPRSCorrelationNumber ::= OCTET STRING (SIZE(8..20)) + +GPRSEvent ::= ENUMERATED + -- see 3GPP TS 03.33 +{ + pDPContextActivation(1), + startOfInterceptionWithPDPContextActive(2), + pDPContextDeactivation(4), + gPRSAttach(5), + gPRSDetach(6), + cellOrRAUpdate(10), + sMS(11), + ..., + pDPContextModification(13), + endOfInterceptionWithPDPContextActive(14) +} + +Services-Data-Information ::= SEQUENCE +{ + gPRS-parameters [1] GPRS-parameters OPTIONAL, + ... +} + +GPRS-parameters ::= SEQUENCE +{ + pDP-address-allocated-to-the-target [1] DataNodeAddress OPTIONAL, + aPN [2] OCTET STRING (SIZE(1..100)) OPTIONAL, + -- The Access Point Name (APN) is coded in accordance with + -- 3GPP TS 24.008 without the APN IEI (only the last 100 octets are used). + -- Octets are coded according to 3GPP TS 23.003. + -- This parameter is duplicated from 3GPP TS 33.108. + pDP-type [3] OCTET STRING (SIZE(2)) OPTIONAL, + -- when PDP-type is IPv4 or IPv6, the IP address is carried by parameter + -- pDP-address-allocated-to-the-target when PDP-type is IPv4v6, + -- the additional IP address is carried by parameter additionalIPaddress + ..., + nSAPI [4] OCTET STRING (SIZE (1)) OPTIONAL, + additionalIPaddress [5] DataNodeAddress OPTIONAL +} + +GPRSOperationErrorCode ::= OCTET STRING (SIZE(2)) + -- Refer to 3GPP TS 24.008 for values (GMM cause or SM cause parameter). + +DataNodeAddress ::= CHOICE +{ + ipAddress [1] IPAddress, + x25Address [2] X25Address, + ... +} + +IPAddress ::= SEQUENCE +{ + iP-type [1] ENUMERATED + { + iPV4(0), + iPV6(1), + ... + }, + iP-value [2] IP-value, + iP-assignment [3] ENUMERATED + { + static(1), + -- The static coding shall be used to report a static address. + dynamic(2), + -- The dynamic coding shall be used to report a dynamically allocated address. + notKnown(3), + -- The notKnown coding shall be used to report other then static or dynamically + -- allocated IP addresses. + ... + } OPTIONAL, + ..., + iPv6PrefixLength [4] INTEGER (1..128) OPTIONAL, + -- Indicates the length of the prefix delegated by the CSP to the subscriber + -- example: 60 if IP address is "2001:db8:0:85a3::ac1f:8001/60" + -- Mandatory in case where the iP-value contains an IPv6 binary value + iPv4SubnetMask [5] OCTET STRING (SIZE(4)) OPTIONAL + -- For IPv4 addresses, this indicates the subnetmask to be applied to the iP-value field. + -- The subnet mask is intended to be presented as a binary value, e.g. "ff ff ff f8" to + -- represent the dotted-decimal subnet mask of "255.255.255.248" corresponding to + -- a /29 CIDR-format subnet mask +} + +IP-value ::= CHOICE +{ + iPBinaryAddress [1] OCTET STRING (SIZE(4..16)), + -- In case of IPv6, the Prefix Length is provided by the "iPv6PrefixLength" + -- In case of IPv4, the netmask is provided by the "iPv4SubnetMask" + iPTextAddress [2] IA5String (SIZE(7..45)), + -- In case of IPv6, the delivered iPTextAddress field could include a complete + -- single IPv6-Address or an IPv6-Prefix for a subnetwork on the target side. + -- In case of IPv4, the delivered iPTextAddress field could include a single + -- IPv4 address or an IPv4address/netmask, for example "192.168.1.1" or "192.168.1.1/24" + ... +} + +X25Address ::= OCTET STRING (SIZE(1..25)) + +National-HI2-ASN1parameters ::= SEQUENCE +{ + countryCode [1] PrintableString (SIZE (2)), + -- Country Code according to ISO 3166-1, + -- the country to which the parameters inserted after the extension marker apply. + ... + -- In case a given country wants to use additional national parameters according to its law, + -- these national parameters should be defined using the ASN.1 syntax and added after the + -- extension marker (...). + -- It is recommended that "version parameter" and "vendor identification parameter" are + -- included in the national parameters definition. Vendor identifications can be + -- retrieved from the IANA web site (see annex K). Besides, it is recommended to avoid + -- using tags from 240 to 255 in a formal type definition. +} + +END -- end of HI2Operations diff --git a/102232-1/LI-PS-PDU.asn b/102232-1/LI-PS-PDU.asn index 910729a3afa38b63037ea151c061377c38234eef..65fbe912ce1cd476af6c442f251cd389a9ee387f 100644 --- a/102232-1/LI-PS-PDU.asn +++ b/102232-1/LI-PS-PDU.asn @@ -14,7 +14,7 @@ IMPORTS {itu-t(0) identified-organization(4) etsi(0) common-parameters(3280) version241(241)} - -- from ETSI TS 101 671 [4] + -- previously from ETSI TS 101 671 [4]; now provided with this specification IRI-Parameters, IRIsContent, Location, @@ -22,7 +22,7 @@ IMPORTS FROM HI2Operations {itu-t(0) identified-organization(4) etsi(0) securityDomain(2) lawfulIntercept(2) hi2(1) version18(18)} - -- from ETSI TS 101 671 [4] + -- previously from ETSI TS 101 671 [4]; now provided with this specification HI1-Operation FROM HI1NotificationOperations {itu-t(0) identified-organization(4) etsi(0) securityDomain(2) lawfulIntercept(2) hi1(0) notificationOperations(1) version7(7)} @@ -249,7 +249,7 @@ Payload ::= CHOICE hI1-Operation [3] HI1NotificationOperations.HI1-Operation, encryptionContainer [4] EncryptionContainer, threeGPP-HI1-Operation [5] ThreeGPP-HI1NotificationOperations.ThreeGPP-HI1-Operation, - -- This structure may be functionally redundant with hI1-Operation from ETSI TS 101 671 [4] + -- This structure may be functionally redundant with hI1-Operation previously from ETSI TS 101 671 [4] iLHIPayload [6] SEQUENCE OF ILHIPDU.ILHIPayload, -- For typical use cases see ETSI TS 103 462 [45] hI4Payload [7] SEQUENCE OF HI4Payload