Add EmergencySessionEstablishmentRoaming (c1e1378b) · Commits · INT - Core Network and Interoperability Testing / Voice and Video over LTE / Emergency VoLTE Interoperability Tests

ttcn/AtsImsIot/AtsImsIot_Emergency.ttcn

+427 −1

Original line number	Diff line number	Diff line
		@@ -3488,6 +3488,432 @@ module AtsImsIot_Emergency {
		*/
		group EmergencySessionEstablishmentRoaming {

		/**
		* @see ETSI TS 103 795-3 Clause 6.3.1 Roaming UE calling PSAP with emergency registration
		*/
		group RoamingUECallingPSAPWithEmergencyRegistration {

		/**
		* @desc To demonstrate the establishment of dedicated bearers at the originating EPC due to SIP roaming emergency session establishment within an emergency registration.
		* PSAP is located in the IM CN subsystem of IMS A
		* @see ETSI TS 103 795-2 Clause 6.3.1 Roaming UE calling PSAP with emergency registration
		*/
		testcase TD_VoLTE_ECO_RMI_INI_01() runs on ImsTestCoordinator system IotSystemInterface {

		var IotEquipmentUser v_ueB := f_cf_create_IotEquipmentUser ( c_userUE_B_emergency );
		var IotEquipmentUser v_psap := f_cf_create_IotEquipmentUser ( c_psap );
		var ImsUserInfo v_userInfoB := f_getImUser ( PX_EUT_B_EMERGENCY );
		var ImsUserInfo v_infoPsap := f_getImUser ( PX_PSAP );

		f_setVxLteMonIterfacesAvailability();
		//Check required monitor interfaces due to TD
		if (f_checkVxLteRequiredMonitorInterface({PX_SIP_GMA_INTERFACENAME,
		PX_DIAMETER_GX_INTERFACENAME,
		PX_DIAMETER_RX_INTERFACENAME,
		PX_SIP_MW_PE_INTERFACENAME,
		PX_SIP_MM_B_PSAP_INTERFACENAME // E-CSCCF -> PSAP
		}))
		{
		var SipMessage v_sip;

		f_cf_createVxLteMonitor();

		// map/connect component ports
		f_cf_adapter_up ( );
		f_cf_user_up ( v_ueB );
		f_cf_user_up ( v_psap );
		f_cf_VxLteMonitor_Up();

		// Preamble
		f_mtc_userRegistration(v_ueB, v_userInfoB);
		if (PX_PSAP_REGISTERED) {
		f_mtc_userRegistration(v_psap, v_infoPsap);
		} else {
		// TODO Check OPTIONS from PSAP to E-CSCF
		}
		f_mtc_check_precond_TD_VoLTE_ECO_RMI_INI_01();

		// Test body
		if (not PX_ECALL) {
		f_mtc_check_TP_GM_PCSCF_ECO_INVITE_02(vc_vxlte_monitor_components.gmB, -, v_sip); // INVITE Event 1
		} else {
		f_mtc_check_TP_GM_PCSCF_ECO_INVITE_04(vc_vxlte_monitor_components.gmB, -, v_sip); // INVITE Event 1
		}
		f_mtc_check_TP_GM_PCSCF_ECO_100Trying_01(vc_vxlte_monitor_components.gmB, -, v_sip);

		//Rx/Gx exchange after INVITE (SDP) was received at P-CSCF
		f_mtc_check_TP_RX_PCSCF_AAR_03(vc_vxlte_monitor_components.rx);// Event 2
		f_mtc_check_TP_GX_PCRF_RAR_01(vc_vxlte_monitor_components.gx, true); // Event 3
		f_mtc_check_TP_GX_PGW_RAA_02(vc_vxlte_monitor_components.gx); // Event 4
		f_mtc_check_TP_RX_PCRF_AAA_02(vc_vxlte_monitor_components.rx); // Event 5
		f_mtc_check_TP_RX_PCSCF_RAA_01(vc_vxlte_monitor_components.rx);// Events 7,8
		f_mtc_check_TP_GX_PCRF_CCA_01(vc_vxlte_monitor_components.gx); // Events 6,9

		f_mtc_check_TP_MW_PCSCF_ECO_INVITE_02(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 10
		f_mtc_check_TP_MW_PCSCF_ECO_100Trying_01(vc_vxlte_monitor_components.mwPE, -, v_sip);

		f_mtc_check_TP_MM_ECSCF_ECO_INVITE_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // Event 11
		f_mtc_check_TP_MM_ECSCF_ECO_100Trying_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip);

		// 183 Session Progress
		f_mtc_check_TP_MM_ECSCF_ECO_183SESSION_PROGRESS_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // 183 In Progress Event 12
		f_mtc_check_TP_MW_PCSCF_ECO_183SESSION_PROGRESS_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 13
		f_mtc_check_TP_GM_PCSCF_183SESSION_PROGRESS_01(vc_vxlte_monitor_components.gmB, -, v_sip); // Event 18

		//Rx/Gx exchange after 183(SDP) was received at P-CSCF
		f_mtc_check_TP_RX_PCSCF_AAR_04(vc_vxlte_monitor_components.rx);// Event 14
		f_mtc_check_TP_GX_PCRF_RAR_01(vc_vxlte_monitor_components.gx, true); // Event 15
		f_mtc_check_TP_GX_PGW_RAA_02(vc_vxlte_monitor_components.gx); // Event 16
		f_mtc_check_TP_RX_PCRF_AAA_02(vc_vxlte_monitor_components.rx); // Event 17

		f_mtc_check_TP_MM_ECSCF_ECO_180RINGING_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // 180 Ringing – Event 20
		f_mtc_check_TP_MW_PCSCF_ECO_180RINGING_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 21
		f_mtc_check_TP_GM_PCSCF_180RINGING_01(vc_vxlte_monitor_components.gmB, -, v_sip); // Event 22

		f_mtc_userCheckRinging(v_psap); // Event 19
		f_mtc_userCheckPeerIsRinging(v_ueB); // Event 19
		f_mtc_userAnswerCall(v_psap);

		f_mtc_check_TP_MM_ECSCF_ECO_200OK_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // 200 OK Event 23
		f_mtc_check_TP_MW_PCSCF_ECO_200OK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 24
		f_mtc_check_TP_GM_PCSCF_200OK_01(vc_vxlte_monitor_components.gmB, -, v_sip); // Event 25

		f_mtc_check_TP_GM_PCSCF_ACK_01(vc_vxlte_monitor_components.gmB, -, v_sip); // ACK Event 26
		f_mtc_check_TP_MW_PCSCF_ECO_ACK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // ACK Event 27
		f_mtc_check_TP_MM_ECSCF_ECO_ACK_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // ACK – Event 28

		f_mtc_userCheckCallEstablished(v_ueB); // Event 29
		f_mtc_userCheckCallEstablished(v_psap); // Event 29

		// Postamble
		f_mtc_EndCall(v_ueB);
		f_PO_user_home_deregistration(v_ueB);
		f_PO_user_home_deregistration(v_psap);
		//f_cf_int_call_down(v_config);

		//unmap/disconnect component ports
		f_cf_user_down ( v_psap );
		f_cf_user_down ( v_ueB );
		f_cf_VxLteMonitor_Down();
		}else{
		//log...
		setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
		}
		f_cf_adapter_down ( );
		} // End of TC TD_VoLTE_ECO_INT_INI_01

		group f_TD_VoLTE_ECO_RMI_INI_01 {

		function f_mtc_check_precond_TD_VoLTE_ECO_RMI_INI_01() runs on ImsTestCoordinator {
		log("If the test case fails, please check the preconditions");
		// TODO Add real code to check pre-conditions
		} // End of function f_mtc_check_precond_TD_VoLTE_ECO_RMI_INI_01

		} // End of group f_TD_VoLTE_ECO_RMI_INI_01
		} // End of group RoamingUECallingPSAPWithEmergencyRegistration

		/**
		* @see ETSI TS 103 795-3 Clause 6.3.2 Roaming UE calling PSAP with non-emergency registration
		*/
		group RoamingUECallingPSAPWithNonEmergencyRegistration {

		/**
		* @desc To demonstrate the establishment of dedicated bearers at the originating EPC due to roaming SIP emergency session establishment within non-emergency registration.
		* PSAP is located in the IM CN subsystem of IMS A
		* @see ETSI TS 103 795-2 Clause 6.3.2.1 Roaming UE calling PSAP in same network
		*/
		testcase TD_VoLTE_ECO_RMI_INI_02() runs on ImsTestCoordinator system IotSystemInterface {

		var IotEquipmentUser v_ueB := f_cf_create_IotEquipmentUser ( c_userUE_B_emergency );
		var IotEquipmentUser v_psap := f_cf_create_IotEquipmentUser ( c_psap );
		var ImsUserInfo v_userInfoB := f_getImUser ( PX_EUT_B ); //non-emergency registration
		var ImsUserInfo v_infoPsap := f_getImUser ( PX_PSAP );

		f_setVxLteMonIterfacesAvailability();
		//Check required monitor interfaces due to TD
		if (f_checkVxLteRequiredMonitorInterface({PX_SIP_GMB_INTERFACENAME,
		PX_DIAMETER_GX_INTERFACENAME,
		PX_DIAMETER_RX_INTERFACENAME,
		PX_SIP_MW_PE_INTERFACENAME,
		PX_SIP_MM_B_PSAP_INTERFACENAME // E-CSCCF -> PSAP
		}))
		{
		var SipMessage v_sip;

		f_cf_createVxLteMonitor();

		// map/connect component ports
		f_cf_adapter_up ( );
		f_cf_user_up ( v_ueB );
		f_cf_user_up ( v_psap );
		f_cf_VxLteMonitor_Up();

		// Preamble
		f_mtc_userRegistration(v_ueB, v_userInfoB);
		if (PX_PSAP_REGISTERED) {
		f_mtc_userRegistration(v_psap, v_infoPsap);
		} else {
		// TODO Check OPTIONS from PSAP to E-CSCF
		}
		f_mtc_check_precond_TD_VoLTE_ECO_RMI_INI_02();

		// Test body
		// Test body
		if (not PX_ECALL) {
		f_mtc_check_TP_GM_PCSCF_ECO_INVITE_02(vc_vxlte_monitor_components.gmB, -, v_sip); // INVITE Event 1
		} else {
		f_mtc_check_TP_GM_PCSCF_ECO_INVITE_04(vc_vxlte_monitor_components.gmB, -, v_sip); // INVITE Event 1
		}
		f_mtc_check_TP_GM_PCSCF_ECO_100Trying_01(vc_vxlte_monitor_components.gmB, -, v_sip);

		//Rx/Gx exchange after INVITE (SDP) was received at P-CSCF
		f_mtc_check_TP_RX_PCSCF_AAR_03(vc_vxlte_monitor_components.rx);// Event 2
		f_mtc_check_TP_GX_PCRF_RAR_01(vc_vxlte_monitor_components.gx, true); // Event 3
		f_mtc_check_TP_GX_PGW_RAA_02(vc_vxlte_monitor_components.gx); // Event 4
		f_mtc_check_TP_RX_PCRF_AAA_02(vc_vxlte_monitor_components.rx); // Event 5
		f_mtc_check_TP_RX_PCSCF_RAA_01(vc_vxlte_monitor_components.rx);// Events 7,8
		f_mtc_check_TP_GX_PCRF_CCA_01(vc_vxlte_monitor_components.gx); // Events 6,9

		f_mtc_check_TP_MW_PCSCF_ECO_INVITE_02(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 10
		f_mtc_check_TP_MW_PCSCF_ECO_100Trying_01(vc_vxlte_monitor_components.mwPE, -, v_sip);

		f_mtc_check_TP_MM_ECSCF_ECO_INVITE_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // Event 11
		f_mtc_check_TP_MM_ECSCF_ECO_100Trying_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip);

		// 183 Session Progress
		f_mtc_check_TP_MM_ECSCF_ECO_183SESSION_PROGRESS_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // 183 In Progress Event 12
		f_mtc_check_TP_MW_PCSCF_ECO_183SESSION_PROGRESS_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 13
		f_mtc_check_TP_GM_PCSCF_183SESSION_PROGRESS_01(vc_vxlte_monitor_components.gmB, -, v_sip); // Event 18

		//Rx/Gx exchange after 183(SDP) was received at P-CSCF
		f_mtc_check_TP_RX_PCSCF_AAR_04(vc_vxlte_monitor_components.rx);// Event 14
		f_mtc_check_TP_GX_PCRF_RAR_01(vc_vxlte_monitor_components.gx, true); // Event 15
		f_mtc_check_TP_GX_PGW_RAA_02(vc_vxlte_monitor_components.gx); // Event 16
		f_mtc_check_TP_RX_PCRF_AAA_02(vc_vxlte_monitor_components.rx); // Event 17

		f_mtc_check_TP_MM_ECSCF_ECO_180RINGING_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // 180 Ringing – Event 20
		f_mtc_check_TP_MW_PCSCF_ECO_180RINGING_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 21
		f_mtc_check_TP_GM_PCSCF_180RINGING_01(vc_vxlte_monitor_components.gmB, -, v_sip); // Event 22

		f_mtc_userCheckRinging(v_psap); // Event 19
		f_mtc_userCheckPeerIsRinging(v_ueB); // Event 19
		f_mtc_userAnswerCall(v_psap);

		f_mtc_check_TP_MM_ECSCF_ECO_200OK_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // 200 OK Event 23
		f_mtc_check_TP_MW_PCSCF_ECO_200OK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 24
		f_mtc_check_TP_GM_PCSCF_200OK_01(vc_vxlte_monitor_components.gmB, -, v_sip); // Event 25

		f_mtc_check_TP_GM_PCSCF_ACK_01(vc_vxlte_monitor_components.gmB, -, v_sip); // ACK Event 26
		f_mtc_check_TP_MW_PCSCF_ECO_ACK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // ACK Event 27
		f_mtc_check_TP_MM_ECSCF_ECO_ACK_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // ACK – Event 28

		f_mtc_userCheckCallEstablished(v_ueB); // Event 29
		f_mtc_userCheckCallEstablished(v_psap); // Event 29

		// Postamble
		f_mtc_EndCall(v_ueB);
		f_PO_user_home_deregistration(v_ueB);
		f_PO_user_home_deregistration(v_psap);
		//f_cf_int_call_down(v_config);

		//unmap/disconnect component ports
		f_cf_user_down ( v_psap );
		f_cf_user_down ( v_ueB );
		f_cf_VxLteMonitor_Down();
		}else{
		//log...
		setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
		}
		f_cf_adapter_down ( );
		} // End of TC TD_VoLTE_ECO_RMI_INI_02

		group f_TD_VoLTE_ECO_RMI_INI_02 {

		function f_mtc_check_precond_TD_VoLTE_ECO_RMI_INI_02() runs on ImsTestCoordinator {
		log("If the test case fails, please check the preconditions");
		// TODO Add real code to check pre-conditions
		} // End of function f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_02

		} // End of group f_TD_VoLTE_ECO_RMI_INI_02


		/**
		* @desc To demonstrate the rejection of roaming UE emergency session establishment when the
		* P-CFCF is in home operator's network within non-emergency registration.
		* P-CFCF is located in the IM CN subsystem of IMS A
		* @see ETSI TS 103 795-2 Clause 6.3.2.2 Roaming UE calling PSAP in home operator's network
		*/
		testcase TD_VoLTE_ECO_RMI_INI_03() runs on ImsTestCoordinator system IotSystemInterface {

		var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A_emergency );
		var ImsUserInfo v_userInfoA := f_getImUser ( PX_EUT_A ); //non-emergency registration

		f_setVxLteMonIterfacesAvailability();
		//Check required monitor interfaces due to TD
		if (f_checkVxLteRequiredMonitorInterface({PX_SIP_GMA_INTERFACENAME,
		PX_DIAMETER_GX_INTERFACENAME,
		PX_DIAMETER_RX_INTERFACENAME
		}))
		{
		var SipMessage v_sip;

		f_cf_createVxLteMonitor();

		// map/connect component ports
		f_cf_adapter_up ( );
		f_cf_user_up ( v_ueA );
		f_cf_VxLteMonitor_Up();

		// Preamble
		//registration is not needed

		//similar to TC_VxLTE_RMI_ATT_01 UE A has perform a network_attachment
		f_mtc_userRadioEnabled ( v_ueA, true, true ); // UA-A trigger an initial network_attachment by enabling radio interface of its mobile

		// Test body
		f_mtc_check_TP_GM_PCSCF_ECO_INVITE_05(vc_vxlte_monitor_components.gmA, -, v_sip); // INVITE Event 2
		f_mtc_check_TP_GM_PCSCF_ECO_100Trying_01(vc_vxlte_monitor_components.gmA, -, v_sip);

		// 380 (Alternative Service)
		f_mtc_check_TP_GM_PCSCF_ECO_380ALTSRV_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 3
		f_mtc_check_TP_GM_PCSCF_ECO_ACK_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 4

		//unmap/disconnect component ports
		f_cf_user_down ( v_ueA );
		f_cf_VxLteMonitor_Down();
		}else{
		//log...
		setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
		}
		f_cf_adapter_down ( );
		} // End of TC TD_VoLTE_ECO_RMI_INI_02

		group f_TD_VoLTE_ECO_RMI_INI_03 {

		function f_mtc_check_precond_TD_VoLTE_ECO_RMI_INI_03() runs on ImsTestCoordinator {
		log("If the test case fails, please check the preconditions");
		// TODO Add real code to check pre-conditions
		} // End of function f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_02

		} // End of group f_TD_VoLTE_ECO_RMI_INI_03


		/**
		* @desc To demonstrate the establishment of dedicated bearers for a roaming UE without any registration.
		* PSAP is located in the IM CN subsystem of IMS A
		* @see ETSI TS 103 795-2 Clause 6.3.2.3 Roaming UE calling PSAP with non-registration
		*/
		testcase TD_VoLTE_ECO_RMI_INI_04() runs on ImsTestCoordinator system IotSystemInterface {
		var IotEquipmentUser v_ueB := f_cf_create_IotEquipmentUser ( c_userUE_B_emergency );
		var IotEquipmentUser v_psap := f_cf_create_IotEquipmentUser ( c_psap );
		var ImsUserInfo v_infoPsap := f_getImUser ( PX_PSAP );

		f_setVxLteMonIterfacesAvailability();
		//Check required monitor interfaces due to TD
		if (f_checkVxLteRequiredMonitorInterface({PX_SIP_GMB_INTERFACENAME,
		PX_DIAMETER_GX_INTERFACENAME,
		PX_DIAMETER_RX_INTERFACENAME,
		PX_SIP_MW_PE_INTERFACENAME,
		PX_SIP_MM_B_PSAP_INTERFACENAME // E-CSCCF -> PSAP
		}))
		{
		var SipMessage v_sip;

		f_cf_createVxLteMonitor();

		// map/connect component ports
		f_cf_adapter_up ( );
		f_cf_user_up ( v_ueB );
		f_cf_user_up ( v_psap );
		f_cf_VxLteMonitor_Up();

		// Preamble
		//UE B non-registered
		if (PX_PSAP_REGISTERED) {
		f_mtc_userRegistration(v_psap, v_infoPsap);
		} else {
		// TODO Check OPTIONS from PSAP to E-CSCF
		}
		f_mtc_check_precond_TD_VoLTE_ECO_RMI_INI_04();

		// Test body
		f_mtc_check_TP_GM_PCSCF_ECO_INVITE_03(vc_vxlte_monitor_components.gmB, -, v_sip); // INVITE Event 1
		f_mtc_check_TP_GM_PCSCF_ECO_100Trying_01(vc_vxlte_monitor_components.gmB, -, v_sip);

		//Rx/Gx exchange after INVITE (SDP) was received at P-CSCF
		f_mtc_check_TP_RX_PCSCF_AAR_03(vc_vxlte_monitor_components.rx);// Event 2
		f_mtc_check_TP_GX_PCRF_RAR_01(vc_vxlte_monitor_components.gx, true); // Event 3
		f_mtc_check_TP_GX_PGW_RAA_02(vc_vxlte_monitor_components.gx); // Event 4
		f_mtc_check_TP_RX_PCRF_AAA_02(vc_vxlte_monitor_components.rx); // Event 5
		f_mtc_check_TP_RX_PCSCF_RAA_01(vc_vxlte_monitor_components.rx);// Events 7,8
		f_mtc_check_TP_GX_PCRF_CCA_01(vc_vxlte_monitor_components.gx); // Events 6,9

		f_mtc_check_TP_MW_PCSCF_ECO_INVITE_03(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 10
		f_mtc_check_TP_MW_PCSCF_ECO_100Trying_01(vc_vxlte_monitor_components.mwPE, -, v_sip);

		f_mtc_check_TP_MM_ECSCF_ECO_INVITE_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // Event 11
		f_mtc_check_TP_MM_ECSCF_ECO_100Trying_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip);

		// 183 Session Progress
		f_mtc_check_TP_MM_ECSCF_ECO_183SESSION_PROGRESS_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // 183 In Progress Event 12
		f_mtc_check_TP_MW_PCSCF_ECO_183SESSION_PROGRESS_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 13
		f_mtc_check_TP_GM_PCSCF_183SESSION_PROGRESS_01(vc_vxlte_monitor_components.gmB, -, v_sip); // Event 18

		//Rx/Gx exchange after 183(SDP) was received at P-CSCF
		f_mtc_check_TP_RX_PCSCF_AAR_04(vc_vxlte_monitor_components.rx);// Event 14
		f_mtc_check_TP_GX_PCRF_RAR_01(vc_vxlte_monitor_components.gx, true); // Event 15
		f_mtc_check_TP_GX_PGW_RAA_02(vc_vxlte_monitor_components.gx); // Event 16
		f_mtc_check_TP_RX_PCRF_AAA_02(vc_vxlte_monitor_components.rx); // Event 17

		f_mtc_check_TP_MM_ECSCF_ECO_180RINGING_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // 180 Ringing – Event 22
		f_mtc_check_TP_MW_PCSCF_ECO_180RINGING_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 24
		f_mtc_check_TP_GM_PCSCF_180RINGING_01(vc_vxlte_monitor_components.gmB, -, v_sip); // Event 25

		f_mtc_userCheckRinging(v_psap); // Event 19
		f_mtc_userCheckPeerIsRinging(v_ueB); // Event 19
		f_mtc_userAnswerCall(v_psap); // Event 26

		f_mtc_check_TP_MM_ECSCF_ECO_200OK_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // 200 OK Event 23
		f_mtc_check_TP_MW_PCSCF_ECO_200OK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 24
		f_mtc_check_TP_GM_PCSCF_200OK_01(vc_vxlte_monitor_components.gmB, -, v_sip); // Event 25

		f_mtc_check_TP_GM_PCSCF_ACK_01(vc_vxlte_monitor_components.gmB, -, v_sip); // Event 26
		f_mtc_check_TP_MW_PCSCF_ECO_ACK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 27
		f_mtc_check_TP_MM_ECSCF_ECO_ACK_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // ACK – Event 28

		f_mtc_userCheckCallEstablished(v_ueB); // Event 29
		f_mtc_userCheckCallEstablished(v_psap); // Event 29

		// Postamble
		f_mtc_EndCall(v_ueB);
		f_PO_user_home_deregistration(v_ueB);
		f_PO_user_home_deregistration(v_psap);
		//f_cf_int_call_down(v_config);

		//unmap/disconnect component ports
		f_cf_user_down ( v_psap );
		f_cf_user_down ( v_ueB );
		f_cf_VxLteMonitor_Down();
		}else{
		//log...
		setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
		}
		f_cf_adapter_down ( );
		}
		group f_TD_VoLTE_ECO_RMI_INI_04 {

		function f_mtc_check_precond_TD_VoLTE_ECO_RMI_INI_04() runs on ImsTestCoordinator {
		log("If the test case fails, please check the preconditions");
		// TODO Add real code to check pre-conditions
		} // End of function f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_04

		} // End of group f_TD_VoLTE_ECO_RMI_INI_02




		} // End of group RoamingUECallingPSAPWithNonEmergencyRegistration

		} // End of group EmergencySessionEstablishmentRoaming

		} // End of group Roaming

ttcn/AtsImsIot/AtsImsIot_TP_behavior_GM.ttcn

+4621 −4557

Original line number	Diff line number	Diff line
		@@ -1864,6 +1864,70 @@ module AtsImsIot_TP_behavior_GM {
		}
		} // End of function f_mtc_check_TP_GM_PCSCF_INVITE_04

		/**
		* @desc Verify that the P-CSCF successfully receives an initial emergency INVITE from a registered but not emergency registered UE.
		* Reference
		* "ETSI TS 124 229 [1], Clauses 5.1.6.8.4"
		* Config Id CF_VoLTE_RMI_ES
		* PICS Selection NONE
		* Initial conditions with {
		* the UE_A entity isAttachedTo the EPC_B and
		* the UE_A entity isRegisteredTo the IMS_A and
		* the UE_A entity not isEmergencyRegisteredTo the IMS_A
		* // This implies that the UE is currently attached and registered
		* to its home operator's network and the IP-CAN does not define emergency bearers
		* see 5.1.6.1 3rd paragraph //
		* }
		* Expected behaviour
		* ensure that {
		* when {
		* the UE_A entity isRequestedToEstablishEmergencyCall
		* }
		* then {
		* the IMS_P_CSCF_A entity receives an INVITE containing
		* From indicating value PX_UE_A_SIP_URI,
		* To indicating value PX_SIP_EMERGENCY_SERVICE_URN,
		* CallId indicating value PX_UE_A_CALLID,
		* Via indicating value PX_UE_A_VIA,
		* Route indicating value PX_UE_A_SERVICE_ROUTE,
		* PPreferredIdentity, // one or two instances
		* MessageBody;
		* from the UE_A entity
		* }
		* }
		*/
		function f_mtc_check_TP_GM_PCSCF_ECO_INVITE_05( // FIXME RMI To be reviewed
		in SipInterfaceMonitor p_monitorCompRef,
		in boolean p_checkMessage := false,
		out SipMessage p_sip
		) runs on ImsTestCoordinator {
		if (isvalue(p_monitorCompRef)){
		var ImsUserInfo v_userInfoA := f_getSipUserId(PX_EUT_A_EMERGENCY);
		var ImsUserInfo v_psap := f_getSipUserId(PX_PSAP);

		// Check the INVITE
		p_monitorCompRef.start(
		f_Iot_Sip_receive(
		{
		mw_SipRequest(mw_TP_GM_PCSCF_ECO_INVITE_05(
		-, // FIXME Set expected value
		mw_From_AddrUnion_SipUrl(omit, v_userInfoA.publicId, v_userInfoA.domain),
		mw_To_AddrUnion_SipUrl(omit, v_psap.publicId, v_psap.domain)
		))
		},
		{ mw_SipRequest(mw_INVITE_Request_Base) },
		{0, omit},
		"TP_GM_PCSCF_ECO_INVITE_05 - Request",
		true,
		p_checkMessage
		)
		);
		p_monitorCompRef.done;
		// Retrieve messge
		f_getSipMsgFromMonitor(p_monitorCompRef, p_sip);
		}
		} // End of function f_mtc_check_TP_GM_PCSCF_INVITE_05

		function f_mtc_check_TP_GM_PCSCF_INVITE_04( // FIXME RMI To be reviewed
		in SipInterfaceMonitor p_monitorCompRef,
		in boolean p_checkMessage := false,

ttcn/AtsImsIot/AtsImsIot_Templates_GM.ttcn

+17 −0

Original line number	Diff line number	Diff line
		@@ -484,6 +484,23 @@ module AtsImsIot_Templates_GM {
		}
		} // End of template mw_TP_GM_PCSCF_ECO_INVITE_04

		template (present) INVITE_Request mw_TP_GM_PCSCF_ECO_INVITE_05( // TODO To be enforced
		template (present) SipUrl p_invite_uri := ?,
		template (present) From p_from := ?,
		template (present) To p_to := ?,
		template (present) Contact p_contact := ?,
		template (present) MessageBody p_messageBody := ?,
		template (present) PPreferredID p_pPreferredID := ?,
		template (present) Accept p_accept := ?,
		template (present) RecvInfo p_recvInfo := ?
		) modifies mw_TP_GM_PCSCF_ECO_INVITE_01 := {
		msgHeader := {
		accept := p_accept,
		recvInfo := p_recvInfo,
		pPreferredID := p_pPreferredID
		}
		} // End of template mw_TP_GM_PCSCF_ECO_INVITE_05

		template (present) INVITE_Request mw_TP_GM_PCSCF_RE_INVITE_01( // TODO To be enforced
		template (present) SipUrl p_invite_uri := ?,
		template (present) From p_from := ?,

ttcn/AtsImsIot/AtsImsIot_TestConfiguration.ttcn

+1 −0

File changed.

Preview size limit exceeded, changes collapsed.

ttcn/LibIot/LibIot_PIXITS.ttcn

+6 −0

Original line number	Diff line number	Diff line
		@@ -269,6 +269,12 @@ module LibIot_PIXITS {
		*/
		modulepar integer PX_EUT_B := 2;

		/**
		*
		* @desc Selects product based on index in PX_PRODCUTS vendor list for EUT_B
		*/
		modulepar integer PX_EUT_B_EMERGENCY := 3;

		/**
		*
		* @desc Selects product based on index in PX_PRODCUTS vendor list for EUT_C

Admin message