Newer
Older
f_PO_user_home_deregistration(v_psap);
//unmap/disconnect component ports
f_cf_user_down ( v_psap );
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
f_cf_adapter_down ( );
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
}
f_cf_adapter_down ( );
} // End of TC TD_VoLTE_ECO_INT_REL_02_01
group f_TD_VoLTE_ECO_INT_REL_02_01 {
function f_mtc_check_precond_TD_VoLTE_ECO_INT_REL_02_01() runs on ImsTestCoordinator {
log("If the test case fails, please check the preconditions");
// TODO Add real code to check pre-conditions
} // End of function f_mtc_check_precond_TD_VoLTE_ECO_INT_REL_02_01
} // End of group f_TD_VoLTE_ECO_INT_REL_02_01
/**
* @desc To perform originating PSAP session release and the tear down of related dedicated bearers.
Yann Garcia
committed
* @see ETSI TS 103 795-2 Clause 5.3.3.2 PSAP Initiated Emergency Session Release
* @remark This is option2: PSAP is not in IMS A network
*/
testcase TD_VoLTE_ECO_INT_REL_02_02() runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A_emergency );
var IotEquipmentUser v_psap := f_cf_create_IotEquipmentUser ( c_psap );
var ImsUserInfo v_userInfoA := f_getImUser ( PX_EUT_A_EMERGENCY );
var ImsUserInfo v_infoPsap := f_getImUser ( PX_PSAP );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_SIP_GMA_INTERFACENAME,
PX_DIAMETER_GX_INTERFACENAME,
PX_DIAMETER_RX_INTERFACENAME,
PX_SIP_MW_PE_INTERFACENAME,
PX_SIP_IC_INTERFACENAME // IBCF -> IMS
}))
{
var SipMessage v_sip;
f_cf_createVxLteMonitor();
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_user_up ( v_psap );
f_cf_VxLteMonitor_Up();
// Preamble
if (PX_PSAP_REGISTERED) {
f_mtc_userRegistration(v_psap, v_infoPsap);
} else {
// TODO Check OPTIONS from PSAP to E-CSCF
}
f_mtc_check_precond_TD_VoLTE_ECO_INT_REL_02_02();
// Test body
Yann Garcia
committed
f_mtc_check_TP_IC_IBCF_BYE_01(vc_vxlte_monitor_components.ic); // Event 3
f_mtc_check_TP_MM_ECSCF_ECO_BYE_01(vc_vxlte_monitor_components.mwEB, -, v_sip); // Event 4
f_mtc_check_TP_MW_PCSCF_ECO_BYE_02(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 7
f_mtc_check_TP_GM_PCSCF_ECO_BYE_02(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 8
//Rx/Gx exchange after BYE was received at P-CSCF
f_mtc_check_TP_RX_PCSCF_STR_01(vc_vxlte_monitor_components.rx); // Event 9
f_mtc_check_TP_GX_PCRF_RAR_02(vc_vxlte_monitor_components.gx, true); // Event 10
f_mtc_check_TP_GX_PGW_RAA_03(vc_vxlte_monitor_components.gx); // Event 1
f_mtc_check_TP_RX_PCRF_STA_01(vc_vxlte_monitor_components.rx); // Event 12
f_mtc_check_TP_GM_PCSCF_ECO_200OK_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 13
f_mtc_check_TP_MW_PCSCF_ECO_200OK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 14
f_mtc_check_TP_MM_ECSCF_ECO_200OK_01(vc_vxlte_monitor_components.mwEB, -, v_sip); // Event 16
f_mtc_check_TP_IC_IBCF_2XXRESP_01(vc_vxlte_monitor_components.ic); // Event 17
f_mtc_userCheckCallTerminated(v_ueA); // Event 21
f_mtc_userCheckCallCancelled(v_psap); // Event 20
// Postamble
f_PO_user_home_deregistration(v_ueA);
f_PO_user_home_deregistration(v_psap);
//unmap/disconnect component ports
f_cf_user_down ( v_psap );
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
f_cf_adapter_down ( );
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
}
f_cf_adapter_down ( );
} // End of TC TD_VoLTE_ECO_INT_REL_02_02
group f_TD_VoLTE_ECO_INT_REL_02_02 {
function f_mtc_check_precond_TD_VoLTE_ECO_INT_REL_02_02() runs on ImsTestCoordinator {
log("If the test case fails, please check the preconditions");
// TODO Add real code to check pre-conditions
} // End of function f_mtc_check_precond_TD_VoLTE_ECO_INT_REL_02_02
} // End of group f_TD_VoLTE_ECO_INT_REL_02_02
/**
* @desc To perform originating PSAP session release and the tear down of related dedicated bearers.
* On call release initiated bye PSAP, the P-CSCF A should trigger the removal of all relevant previously created bearers
Yann Garcia
committed
* @see ETSI TS 103 795-2 Clause 5.3.3.2 PSAP Initiated Emergency Session Release
* @remark This is option2: PSAP is in the same network
*/
testcase TD_VoLTE_ECO_INT_REL_02_03() runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A_emergency );
var IotEquipmentUser v_psap := f_cf_create_IotEquipmentUser ( c_psap );
var ImsUserInfo v_userInfoA := f_getImUser ( PX_EUT_A_EMERGENCY );
var ImsUserInfo v_infoPsap := f_getImUser ( PX_PSAP );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_SIP_GMA_INTERFACENAME,
PX_DIAMETER_GX_INTERFACENAME,
PX_DIAMETER_RX_INTERFACENAME,
PX_SIP_MW_PE_INTERFACENAME,
}))
{
var SipMessage v_sip;
f_cf_createVxLteMonitor();
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_user_up ( v_psap );
f_cf_VxLteMonitor_Up();
// Preamble
if (PX_PSAP_REGISTERED) {
f_mtc_userRegistration(v_psap, v_infoPsap);
} else {
// TODO Check OPTIONS from PSAP to E-CSCF
}
f_mtc_check_precond_TD_VoLTE_ECO_INT_REL_02_03();
// Test body
Yann Garcia
committed
f_mtc_check_TP_IC_IBCF_BYE_01(vc_vxlte_monitor_components.ic); // Event 4
Yann Garcia
committed
f_mtc_check_TP_MX_ECSCF_ECO_BYE_01(vc_vxlte_monitor_components.mwEB, -, v_sip); // Event 5
Yann Garcia
committed
f_mtc_check_TP_MW_PCSCF_ECO_BYE_02(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 7
f_mtc_check_TP_GM_PCSCF_ECO_BYE_02(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 8
//Rx/Gx exchange after BYE was received at P-CSCF
f_mtc_check_TP_RX_PCSCF_STR_01(vc_vxlte_monitor_components.rx); // Event 9
f_mtc_check_TP_GX_PCRF_RAR_02(vc_vxlte_monitor_components.gx, true); // Event 10
f_mtc_check_TP_GX_PGW_RAA_03(vc_vxlte_monitor_components.gx); // Event 1
f_mtc_check_TP_RX_PCRF_STA_01(vc_vxlte_monitor_components.rx); // Event 12
f_mtc_check_TP_GM_PCSCF_ECO_200OK_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 13
f_mtc_check_TP_MW_PCSCF_ECO_200OK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 14
f_mtc_check_TP_MW_PCSCF_ECO_200OK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 18
f_mtc_check_TP_IC_IBCF_2XXRESP_01(vc_vxlte_monitor_components.ic); // Event 19
f_mtc_userCheckCallTerminated(v_ueA); // Event 21
f_mtc_userCheckCallCancelled(v_psap); // Event 20
// Postamble
f_PO_user_home_deregistration(v_ueA);
f_PO_user_home_deregistration(v_psap);
//unmap/disconnect component ports
f_cf_user_down ( v_psap );
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
f_cf_adapter_down ( );
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
}
f_cf_adapter_down ( );
} // End of TC TD_VoLTE_ECO_INT_REL_02_03
group f_TD_VoLTE_ECO_INT_REL_02_03 {
function f_mtc_check_precond_TD_VoLTE_ECO_INT_REL_02_03() runs on ImsTestCoordinator {
log("If the test case fails, please check the preconditions");
// TODO Add real code to check pre-conditions
} // End of function f_mtc_check_precond_TD_VoLTE_ECO_INT_REL_02_03
} // End of group f_TD_VoLTE_ECO_INT_REL_02_03
} // End of group EmergencySessionRelease
group EmergencySessionAbortOrReject {
/**
* @desc To perform SIP session abort (originating side) and the related interactions with PCRF A and EPC A.
Yann Garcia
committed
* @see ETSI TS 103 795-2 Clause 5.3.4.1 Emergency Session Abort
* @remark This is option 1: PSAP is in IMS A network
*/
Yann Garcia
committed
testcase TD_VoLTE_EMC_INT_ABT_01_01() runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A_emergency );
var IotEquipmentUser v_psap := f_cf_create_IotEquipmentUser ( c_psap );
var ImsUserInfo v_userInfoA := f_getImUser ( PX_EUT_A_EMERGENCY );
var ImsUserInfo v_infoPsap := f_getImUser ( PX_PSAP );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_SIP_GMA_INTERFACENAME,
PX_DIAMETER_GX_INTERFACENAME,
PX_DIAMETER_RX_INTERFACENAME,
PX_SIP_MW_PE_INTERFACENAME,
PX_SIP_MW_EB_INTERFACENAME, // E-CSCF -> IBCF
PX_SIP_MM_B_PSAP_INTERFACENAME // E-CSCCF -> PSAP
}))
{
var SipMessage v_sip;
f_cf_createVxLteMonitor();
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_user_up ( v_psap );
f_cf_VxLteMonitor_Up();
// Preamble
if (PX_PSAP_REGISTERED) {
f_mtc_userRegistration(v_psap, v_infoPsap);
} else {
// TODO Check OPTIONS from PSAP to E-CSCF
}
Yann Garcia
committed
f_mtc_check_precond_TD_VoLTE_EMC_INT_ABT_01_01();
// Test body
//f_mtc_userInitiateCall (v_ueA, v_userTelInfoB);
Yann Garcia
committed
f_mtc_check_TP_GM_PCSCF_EMC_CANCEL_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 1
//Rx/Gx exchange after CANCEL was received at P-CSCF
f_mtc_check_TP_RX_PCSCF_STR_01(vc_vxlte_monitor_components.rx); // (STR – Event 2
f_mtc_check_TP_GX_PCRF_RAR_02(vc_vxlte_monitor_components.gx, true); // (RAR – Event 3)
f_mtc_check_TP_GX_PGW_RAA_03(vc_vxlte_monitor_components.gx); // (RAA – Event 4)
f_mtc_check_TP_RX_PCRF_STA_01(vc_vxlte_monitor_components.rx); // (STA – Event 5)
Yann Garcia
committed
f_mtc_check_TP_MW_PCSCF_EMC_CANCEL_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 6
Yann Garcia
committed
f_mtc_check_TP_MM_ECSCF_EMC_CANCEL_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // Event 7
f_mtc_check_TP_MW_PCSCF_ECO_200OK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 17
f_mtc_check_TP_GM_PCSCF_200OK_02(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 18
Yann Garcia
committed
f_mtc_check_TP_MW_PCSCF_EMC_487INVITE_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 24
f_mtc_check_TP_GM_PCSCF_487INVITE_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 25
f_mtc_check_TP_GM_PCSCF_ECO_ACK_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 26
f_mtc_check_TP_MW_PCSCF_ECO_ACK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 27
f_mtc_check_TP_MM_ECSCF_ECO_ACK_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // Event 28
f_mtc_userCheckCallTerminated(v_ueA); // Event 33
f_mtc_userCheckCallCancelled(v_psap); // Event 34
// Postamble
f_PO_user_home_deregistration(v_ueA);
f_PO_user_home_deregistration(v_psap);
//unmap/disconnect component ports
f_cf_user_down ( v_psap );
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
f_cf_adapter_down ( );
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
}
f_cf_adapter_down ( );
Yann Garcia
committed
} // End of TC TD_VoLTE_EMC_INT_ABT_01_01
Yann Garcia
committed
group f_TD_VoLTE_EMC_INT_ABT_01_01 {
Yann Garcia
committed
function f_mtc_check_precond_TD_VoLTE_EMC_INT_ABT_01_01() runs on ImsTestCoordinator {
log("If the test case fails, please check the preconditions");
// TODO Add real code to check pre-conditions
Yann Garcia
committed
} // End of function f_mtc_check_precond_TD_VoLTE_EMC_INT_ABT_01_01
Yann Garcia
committed
} // End of group f_TD_VoLTE_EMC_INT_ABT_01_01
/**
* @desc To perform SIP session abort (originating side) and the related interactions with PCRF A and EPC A.
Yann Garcia
committed
* @see ETSI TS 103 795-2 Clause 5.3.4.1 Emergency Session Abort
* @remark This is option 1: PSAP is not in IMS A network
*/
Yann Garcia
committed
testcase TD_VoLTE_EMC_INT_ABT_01_02() runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A_emergency );
var IotEquipmentUser v_psap := f_cf_create_IotEquipmentUser ( c_psap );
var ImsUserInfo v_userInfoA := f_getImUser ( PX_EUT_A_EMERGENCY );
var ImsUserInfo v_infoPsap := f_getImUser ( PX_PSAP );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_SIP_GMA_INTERFACENAME,
PX_DIAMETER_GX_INTERFACENAME,
PX_DIAMETER_RX_INTERFACENAME,
PX_SIP_MW_PE_INTERFACENAME,
PX_SIP_IC_INTERFACENAME // IBCF -> IMS -> PSAP
}))
{
var SipMessage v_sip;
f_cf_createVxLteMonitor();
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_user_up ( v_psap );
f_cf_VxLteMonitor_Up();
// Preamble
if (PX_PSAP_REGISTERED) {
f_mtc_userRegistration(v_psap, v_infoPsap);
} else {
// TODO Check OPTIONS from PSAP to E-CSCF
}
Yann Garcia
committed
f_mtc_check_precond_TD_VoLTE_EMC_INT_ABT_01_02();
// Test body
//f_mtc_userInitiateCall (v_ueA, v_userTelInfoB);
Yann Garcia
committed
f_mtc_check_TP_GM_PCSCF_EMC_CANCEL_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 1
//Rx/Gx exchange after CANCEL was received at P-CSCF
f_mtc_check_TP_RX_PCSCF_STR_01(vc_vxlte_monitor_components.rx); // (STR – Event 2
f_mtc_check_TP_GX_PCRF_RAR_02(vc_vxlte_monitor_components.gx, true); // (RAR – Event 3)
f_mtc_check_TP_GX_PGW_RAA_03(vc_vxlte_monitor_components.gx); // (RAA – Event 4)
f_mtc_check_TP_RX_PCRF_STA_01(vc_vxlte_monitor_components.rx); // (STA – Event 5)
Yann Garcia
committed
f_mtc_check_TP_MW_PCSCF_EMC_CANCEL_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 6
Yann Garcia
committed
f_mtc_check_TP_MX_ECSCF_EMC_CANCEL_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // Event 9
f_mtc_check_TP_IC_IBCF_CANCEL_01(vc_vxlte_monitor_components.ic, true); // CANCEL Event 10 (NOTE: comment out if ISC simulated by Ic)
f_mtc_check_TP_IC_IBCF_2XXRESP_01(vc_vxlte_monitor_components.ic); // 200 CANCEL – Event 11
Yann Garcia
committed
f_mtc_check_TP_MX_ECSCF_ECO_200OK_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // Event 12
f_mtc_check_TP_MW_PCSCF_ECO_200OK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 17
f_mtc_check_TP_GM_PCSCF_200OK_02(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 18
f_mtc_check_TP_IC_IBCF_487INVITE_01(vc_vxlte_monitor_components.ic); // Event 20
Yann Garcia
committed
f_mtc_check_TP_MX_ECSCF_EMC_487INVITE_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // Event 21
Yann Garcia
committed
f_mtc_check_TP_MW_PCSCF_EMC_487INVITE_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 24
f_mtc_check_TP_GM_PCSCF_487INVITE_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 25
f_mtc_check_TP_GM_PCSCF_ECO_ACK_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 26
f_mtc_check_TP_MW_PCSCF_ECO_ACK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 27
Yann Garcia
committed
f_mtc_check_TP_MX_ECSCF_ECO_ACK_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // Event 29
f_mtc_check_TP_IC_IBCF_ACK_01(vc_vxlte_monitor_components.ic, true); // Event 30
f_mtc_userCheckCallTerminated(v_ueA); // Event 33
f_mtc_userCheckCallCancelled(v_psap); // Event 34
// Postamble
f_PO_user_home_deregistration(v_ueA);
f_PO_user_home_deregistration(v_psap);
//unmap/disconnect component ports
f_cf_user_down ( v_psap );
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
f_cf_adapter_down ( );
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
}
f_cf_adapter_down ( );
Yann Garcia
committed
} // End of TC TD_VoLTE_EMC_INT_ABT_01_02
Yann Garcia
committed
group f_TD_VoLTE_EMC_INT_ABT_01_02 {
Yann Garcia
committed
function f_mtc_check_precond_TD_VoLTE_EMC_INT_ABT_01_02() runs on ImsTestCoordinator {
log("If the test case fails, please check the preconditions");
// TODO Add real code to check pre-conditions
Yann Garcia
committed
} // End of function f_mtc_check_precond_TD_VoLTE_EMC_INT_ABT_01_02
Yann Garcia
committed
} // End of group f_TD_VoLTE_EMC_INT_ABT_01_02
/**
* @desc To perform SIP session abort (originating side) and the related interactions with PCRF A and EPC A.
Yann Garcia
committed
* @see ETSI TS 103 795-2 Clause 5.3.4.1 Emergency Session Abort
* @remark This is option 1: PSAP is in PSTN network
Yann Garcia
committed
testcase TD_VoLTE_EMC_INT_ABT_01_03() runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A_emergency );
var IotEquipmentUser v_psap := f_cf_create_IotEquipmentUser ( c_psap );
var ImsUserInfo v_userInfoA := f_getImUser ( PX_EUT_A_EMERGENCY );
var ImsUserInfo v_infoPsap := f_getImUser ( PX_PSAP );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_SIP_GMA_INTERFACENAME,
PX_DIAMETER_GX_INTERFACENAME,
PX_DIAMETER_RX_INTERFACENAME,
PX_SIP_MW_PE_INTERFACENAME,
PX_SIP_IC_INTERFACENAME // IBCF -> IMS -> PSAP
}))
{
var SipMessage v_sip;
f_cf_createVxLteMonitor();
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_user_up ( v_psap );
f_cf_VxLteMonitor_Up();
if (PX_PSAP_REGISTERED) {
f_mtc_userRegistration(v_psap, v_infoPsap);
} else {
// TODO Check OPTIONS from PSAP to E-CSCF
}
Yann Garcia
committed
f_mtc_check_precond_TD_VoLTE_EMC_INT_ABT_01_03();
// Test body
//f_mtc_userInitiateCall (v_ueA, v_userTelInfoB);
Yann Garcia
committed
f_mtc_check_TP_GM_PCSCF_EMC_CANCEL_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 1
//Rx/Gx exchange after CANCEL was received at P-CSCF
f_mtc_check_TP_RX_PCSCF_STR_01(vc_vxlte_monitor_components.rx); // (STR – Event 2
f_mtc_check_TP_GX_PCRF_RAR_02(vc_vxlte_monitor_components.gx, true); // (RAR – Event 3)
f_mtc_check_TP_GX_PGW_RAA_03(vc_vxlte_monitor_components.gx); // (RAA – Event 4)
f_mtc_check_TP_RX_PCRF_STA_01(vc_vxlte_monitor_components.rx); // (STA – Event 5)
Yann Garcia
committed
f_mtc_check_TP_MW_PCSCF_EMC_CANCEL_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 6
Yann Garcia
committed
f_mtc_check_TP_MI_ECSCF_EMC_CANCEL_01(vc_vxlte_monitor_components.mwEB, -, v_sip); // Event 13
Yann Garcia
committed
f_mtc_check_TP_MM_ECSCF_EMC_CANCEL_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // Event 14
Yann Garcia
committed
f_mtc_check_TP_MI_ECSCF_ECO_200OK_01(vc_vxlte_monitor_components.mwEB, -, v_sip); // Event 16
f_mtc_check_TP_MW_PCSCF_ECO_200OK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 17
f_mtc_check_TP_GM_PCSCF_200OK_02(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 18
Yann Garcia
committed
f_mtc_check_TP_MM_ECSCF_EMC_487INVITE_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // Event 22
f_mtc_check_TP_MI_ECSCF_EMC_487INVITE_01(vc_vxlte_monitor_components.mwEB, -, v_sip); // Event 23
Yann Garcia
committed
f_mtc_check_TP_MW_PCSCF_EMC_487INVITE_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 24
f_mtc_check_TP_GM_PCSCF_487INVITE_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 25
f_mtc_check_TP_GM_PCSCF_ECO_ACK_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 26
f_mtc_check_TP_MW_PCSCF_ECO_ACK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 27
Yann Garcia
committed
f_mtc_check_TP_MI_ECSCF_ECO_ACK_01(vc_vxlte_monitor_components.mwEB, -, v_sip); // Event 31
f_mtc_check_TP_MM_ECSCF_ECO_ACK_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // Event 32
f_mtc_userCheckCallTerminated(v_ueA); // Event 33
f_mtc_userCheckCallCancelled(v_psap); // Event 34
// Postamble
f_PO_user_home_deregistration(v_ueA);
f_PO_user_home_deregistration(v_psap);
//unmap/disconnect component ports
f_cf_user_down ( v_psap );
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
f_cf_adapter_down ( );
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
}
f_cf_adapter_down ( );
Yann Garcia
committed
} // End of TC TD_VoLTE_EMC_INT_ABT_01_03
Yann Garcia
committed
group f_TD_VoLTE_EMC_INT_ABT_01_03 {
Yann Garcia
committed
function f_mtc_check_precond_TD_VoLTE_EMC_INT_ABT_01_03() runs on ImsTestCoordinator {
log("If the test case fails, please check the preconditions");
// TODO Add real code to check pre-conditions
Yann Garcia
committed
} // End of function f_mtc_check_precond_TD_VoLTE_EMC_INT_ABT_01_03
Yann Garcia
committed
} // End of group f_TD_VoLTE_EMC_INT_ABT_01_03
/**
* @desc To demonstrate interaction between UE A and PSAP when an emergency session is rejected.
Yann Garcia
committed
* @see ETSI TS 103 795-2 5.3.4.3 Emergency Session Reject
* @remark This is option 1: PSAP is in IMS A network
*/
testcase TD_VoLTE_ECO_INT_REJ_01_01() runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A_emergency );
var IotEquipmentUser v_psap := f_cf_create_IotEquipmentUser ( c_psap );
var ImsUserInfo v_userInfoA := f_getImUser ( PX_EUT_A_EMERGENCY );
var ImsUserInfo v_infoPsap := f_getImUser ( PX_PSAP );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_SIP_GMA_INTERFACENAME,
PX_DIAMETER_GX_INTERFACENAME,
PX_DIAMETER_RX_INTERFACENAME,
PX_SIP_MW_PE_INTERFACENAME,
PX_SIP_MW_EB_INTERFACENAME, // E-CSCF -> IBCF
PX_SIP_MM_B_PSAP_INTERFACENAME // E-CSCCF -> PSAP
}))
{
var SipMessage v_sip;
f_cf_createVxLteMonitor();
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_user_up ( v_psap );
f_cf_VxLteMonitor_Up();
// Preamble
if (PX_PSAP_REGISTERED) {
f_mtc_userRegistration(v_psap, v_infoPsap);
} else {
// TODO Check OPTIONS from PSAP to E-CSCF
}
f_mtc_check_precond_TD_VoLTE_ECO_INT_REJ_01_01();
// Test body
//f_mtc_userInitiateCall (v_ueA, v_userTelInfoB);
f_mtc_check_TP_GM_PCSCF_ECO_INVITE_02(vc_vxlte_monitor_components.gmA, -, v_sip); // INVITE Event 3
f_mtc_check_TP_GM_PCSCF_ECO_100Trying_01(vc_vxlte_monitor_components.gmA, -, v_sip);
//Rx/Gx exchange after INVITE (SDP) was received at P-CSCF
f_mtc_check_TP_RX_PCSCF_AAR_03(vc_vxlte_monitor_components.rx);// Event 4
f_mtc_check_TP_GX_PCRF_RAR_01(vc_vxlte_monitor_components.gx, true); // Event 5
f_mtc_check_TP_GX_PGW_RAA_02(vc_vxlte_monitor_components.gx); // Event 6
f_mtc_check_TP_RX_PCRF_AAA_02(vc_vxlte_monitor_components.rx); // Event 7
f_mtc_check_TP_RX_PCSCF_RAA_01(vc_vxlte_monitor_components.rx);// Events 8,9
f_mtc_check_TP_GX_PCRF_CCA_01(vc_vxlte_monitor_components.gx); // Events 10,11
f_mtc_check_TP_MW_PCSCF_ECO_INVITE_02(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 12
f_mtc_check_TP_MW_PCSCF_ECO_100Trying_01(vc_vxlte_monitor_components.mwPE, -, v_sip);
f_mtc_check_TP_MW_PCSCF_ECO_INVITE_03(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 13
f_mtc_check_TP_MW_PCSCF_ECO_100Trying_01(vc_vxlte_monitor_components.mwPE, -, v_sip);
f_mtc_check_TP_MM_ECSCF_ECO_INVITE_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // Event 11
// 480 Temporary Unvailable
Yann Garcia
committed
f_mtc_check_TP_MM_ECSCF_ECO_480INVITE_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // 480 Temporary Unavailables Event 14
f_mtc_check_TP_MW_PCSCF_ECO_480INVITE_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 23
f_mtc_check_TP_RX_PCSCF_STR_01(vc_vxlte_monitor_components.rx); // Event 24
f_mtc_check_TP_GX_PCRF_RAR_01(vc_vxlte_monitor_components.gx, true); // Event 25
f_mtc_check_TP_GX_PGW_RAA_02(vc_vxlte_monitor_components.gx); // Event 26
f_mtc_check_TP_RX_PCRF_STA_01(vc_vxlte_monitor_components.rx); // Event 27
Yann Garcia
committed
f_mtc_check_TP_GM_PCSCF_ECO_380ALTSRV_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 28
f_mtc_check_TP_GM_PCSCF_ECO_ACK_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 29
f_mtc_check_TP_MW_PCSCF_ECO_ACK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 30
f_mtc_check_TP_MM_ECSCF_ECO_ACK_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // Event 31
f_mtc_userCheckCallTerminated(v_ueA); // Event 36
f_mtc_userCheckCallCancelled(v_psap); // Event 37
// Postamble
f_PO_user_home_deregistration(v_ueA);
f_PO_user_home_deregistration(v_psap);
//unmap/disconnect component ports
f_cf_user_down ( v_psap );
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
f_cf_adapter_down ( );
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
}
f_cf_adapter_down ( );
} // End of TC TD_VoLTE_ECO_INT_REJ_01_01
group f_TD_VoLTE_ECO_INT_REJ_01_01 {
function f_mtc_check_precond_TD_VoLTE_ECO_INT_REJ_01_01() runs on ImsTestCoordinator {
log("If the test case fails, please check the preconditions");
// TODO Add real code to check pre-conditions
} // End of function f_mtc_check_precond_TD_VoLTE_ECO_INT_REJ_01_01
} // End of group f_TD_VoLTE_ECO_INT_REJ_01_01
* @desc To demonstrate interaction between UE A and PSAP when an emergency session is rejected.
Yann Garcia
committed
* @see ETSI TS 103 795-2 5.3.4.3 Emergency Session Reject
* @remark This is option 1: PSAP is not in IMS A network
testcase TD_VoLTE_ECO_INT_REJ_01_02() runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A_emergency );
var IotEquipmentUser v_psap := f_cf_create_IotEquipmentUser ( c_psap );
var ImsUserInfo v_userInfoA := f_getImUser ( PX_EUT_A_EMERGENCY );
var ImsUserInfo v_infoPsap := f_getImUser ( PX_PSAP );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_SIP_GMA_INTERFACENAME,
PX_DIAMETER_GX_INTERFACENAME,
PX_DIAMETER_RX_INTERFACENAME,
PX_SIP_MW_PE_INTERFACENAME,
PX_SIP_IC_INTERFACENAME // IBCF -> IMS -> PSAP
}))
{
var SipMessage v_sip;
f_cf_createVxLteMonitor();
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_user_up ( v_psap );
f_cf_VxLteMonitor_Up();
// Preamble
if (PX_PSAP_REGISTERED) {
f_mtc_userRegistration(v_psap, v_infoPsap);
} else {
// TODO Check OPTIONS from PSAP to E-CSCF
}
f_mtc_check_precond_TD_VoLTE_ECO_INT_REJ_01_02();
// Test body
//f_mtc_userInitiateCall (v_ueA, v_userTelInfoB);
f_mtc_check_TP_GM_PCSCF_ECO_INVITE_02(vc_vxlte_monitor_components.gmA, -, v_sip); // INVITE Event 3
f_mtc_check_TP_GM_PCSCF_ECO_100Trying_01(vc_vxlte_monitor_components.gmA, -, v_sip);
//Rx/Gx exchange after INVITE (SDP) was received at P-CSCF
f_mtc_check_TP_RX_PCSCF_AAR_03(vc_vxlte_monitor_components.rx);// Event 4
f_mtc_check_TP_GX_PCRF_RAR_01(vc_vxlte_monitor_components.gx, true); // Event 5
f_mtc_check_TP_GX_PGW_RAA_02(vc_vxlte_monitor_components.gx); // Event 6
f_mtc_check_TP_RX_PCRF_AAA_02(vc_vxlte_monitor_components.rx); // Event 7
f_mtc_check_TP_RX_PCSCF_RAA_01(vc_vxlte_monitor_components.rx);// Events 8,9
f_mtc_check_TP_GX_PCRF_CCA_01(vc_vxlte_monitor_components.gx); // Events 10,11
f_mtc_check_TP_MW_PCSCF_ECO_INVITE_02(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 12
f_mtc_check_TP_MW_PCSCF_ECO_100Trying_01(vc_vxlte_monitor_components.mwPE, -, v_sip);
Yann Garcia
committed
f_mtc_check_TP_MX_ECSCF_ECO_INVITE_01(vc_vxlte_monitor_components.mwEB, -, v_sip); // Event 11
f_mtc_check_TP_MX_ECSCF_ECO_100Trying_01(vc_vxlte_monitor_components.mwEB, -, v_sip);
f_mtc_check_TP_IC_IBCF_INVITE_01(vc_vxlte_monitor_components.ic); // INVITE Event 12 (NOTE: comment out if ISC simulated by Ic)
// 480 Temporary Unavailable
f_mtc_check_TP_IC_IBCF_480TEMPAV_01(vc_vxlte_monitor_components.ic, -, v_sip); // INVITE Event 12 (NOTE: comment out if ISC simulated by Ic)
Yann Garcia
committed
f_mtc_check_TP_MW_PCSCF_ECO_480INVITE_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 23
f_mtc_check_TP_RX_PCSCF_STR_01(vc_vxlte_monitor_components.rx); // Event 24
f_mtc_check_TP_GX_PCRF_RAR_01(vc_vxlte_monitor_components.gx, true); // Event 25
f_mtc_check_TP_GX_PGW_RAA_02(vc_vxlte_monitor_components.gx); // Event 26
f_mtc_check_TP_RX_PCRF_STA_01(vc_vxlte_monitor_components.rx); // Event 27
Yann Garcia
committed
f_mtc_check_TP_GM_PCSCF_ECO_380ALTSRV_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 28
f_mtc_check_TP_GM_PCSCF_ECO_ACK_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 29
f_mtc_check_TP_MW_PCSCF_ECO_ACK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 30
f_mtc_check_TP_IC_IBCF_ACK_01(vc_vxlte_monitor_components.mmB_PSAP); // Event 31
f_mtc_userCheckCallTerminated(v_ueA); // Event 36
f_mtc_userCheckCallCancelled(v_psap); // Event 37
// Postamble
f_PO_user_home_deregistration(v_ueA);
f_PO_user_home_deregistration(v_psap);
//unmap/disconnect component ports
f_cf_user_down ( v_psap );
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
f_cf_adapter_down ( );
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
}
f_cf_adapter_down ( );
} // End of TC TD_VoLTE_ECO_INT_REJ_01_02
group f_TD_VoLTE_ECO_INT_REJ_01_02 {
function f_mtc_check_precond_TD_VoLTE_ECO_INT_REJ_01_02() runs on ImsTestCoordinator {
log("If the test case fails, please check the preconditions");
// TODO Add real code to check pre-conditions
} // End of function f_mtc_check_precond_TD_VoLTE_ECO_INT_REJ_01_02
} // End of group f_TD_VoLTE_ECO_INT_REJ_01_02
/**
* @desc To demonstrate interaction between UE A and PSAP when an emergency session is rejected.
Yann Garcia
committed
* @see ETSI TS 103 795-2 5.3.4.3 Emergency Session Reject
* @remark This is option 1: PSAP is in PSTN network
*/
testcase TD_VoLTE_ECO_INT_REJ_01_03() runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A_emergency );
var IotEquipmentUser v_psap := f_cf_create_IotEquipmentUser ( c_psap );
var ImsUserInfo v_userInfoA := f_getImUser ( PX_EUT_A_EMERGENCY );
var ImsUserInfo v_infoPsap := f_getImUser ( PX_PSAP );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_SIP_GMA_INTERFACENAME,
PX_DIAMETER_GX_INTERFACENAME,
PX_DIAMETER_RX_INTERFACENAME,
PX_SIP_MW_PE_INTERFACENAME,
PX_SIP_IC_INTERFACENAME // IBCF -> IMS -> PSAP
}))
{
var SipMessage v_sip;
f_cf_createVxLteMonitor();
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_user_up ( v_psap );
f_cf_VxLteMonitor_Up();
// Preamble
if (PX_PSAP_REGISTERED) {
f_mtc_userRegistration(v_psap, v_infoPsap);
} else {
// TODO Check OPTIONS from PSAP to E-CSCF
}
f_mtc_check_precond_TD_VoLTE_ECO_INT_REJ_01_03();
// Test body
//f_mtc_userInitiateCall (v_ueA, v_userTelInfoB);
f_mtc_check_TP_GM_PCSCF_ECO_INVITE_02(vc_vxlte_monitor_components.gmA, -, v_sip); // INVITE Event 3
f_mtc_check_TP_GM_PCSCF_ECO_100Trying_01(vc_vxlte_monitor_components.gmA, -, v_sip);
//Rx/Gx exchange after INVITE (SDP) was received at P-CSCF
f_mtc_check_TP_RX_PCSCF_AAR_03(vc_vxlte_monitor_components.rx);// Event 4
f_mtc_check_TP_GX_PCRF_RAR_01(vc_vxlte_monitor_components.gx, true); // Event 5
f_mtc_check_TP_GX_PGW_RAA_02(vc_vxlte_monitor_components.gx); // Event 6
f_mtc_check_TP_RX_PCRF_AAA_02(vc_vxlte_monitor_components.rx); // Event 7
f_mtc_check_TP_RX_PCSCF_RAA_01(vc_vxlte_monitor_components.rx);// Events 8,9
f_mtc_check_TP_GX_PCRF_CCA_01(vc_vxlte_monitor_components.gx); // Events 10,11
f_mtc_check_TP_MW_PCSCF_ECO_INVITE_02(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 12
f_mtc_check_TP_MW_PCSCF_ECO_100Trying_01(vc_vxlte_monitor_components.mwPE, -, v_sip);
Yann Garcia
committed
f_mtc_check_TP_MI_ECSCF_ECO_INVITE_01(vc_vxlte_monitor_components.mwEB, -, v_sip); // Event 19
f_mtc_check_TP_MI_ECSCF_ECO_100Trying_01(vc_vxlte_monitor_components.mwEB, -, v_sip);
f_mtc_check_TP_MM_ECSCF_ECO_INVITE_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // Event 20
// 480 Temporary Unavailable
Yann Garcia
committed
f_mtc_check_TP_MM_ECSCF_ECO_480INVITE_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // Event 21
f_mtc_check_TP_MI_ECSCF_ECO_480INVITE_01(vc_vxlte_monitor_components.mwEB, -, v_sip); // Event 22
f_mtc_check_TP_MW_PCSCF_ECO_480INVITE_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 23
f_mtc_check_TP_RX_PCSCF_STR_01(vc_vxlte_monitor_components.rx); // Event 24
f_mtc_check_TP_GX_PCRF_RAR_01(vc_vxlte_monitor_components.gx, true); // Event 25
f_mtc_check_TP_GX_PGW_RAA_02(vc_vxlte_monitor_components.gx); // Event 26
f_mtc_check_TP_RX_PCRF_STA_01(vc_vxlte_monitor_components.rx); // Event 27
Yann Garcia
committed
f_mtc_check_TP_GM_PCSCF_ECO_380ALTSRV_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 28
f_mtc_check_TP_GM_PCSCF_ECO_ACK_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 29
f_mtc_check_TP_MW_PCSCF_ECO_ACK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 30
Yann Garcia
committed
f_mtc_check_TP_MI_ECSCF_ECO_ACK_01(vc_vxlte_monitor_components.mwEB, -, v_sip); // Event 34
f_mtc_check_TP_MM_ECSCF_ECO_ACK_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // ACK – Event 35
f_mtc_userCheckCallTerminated(v_ueA); // Event 33
f_mtc_userCheckCallCancelled(v_psap); // Event 34
// Postamble
f_PO_user_home_deregistration(v_ueA);
f_PO_user_home_deregistration(v_psap);
//unmap/disconnect component ports
f_cf_user_down ( v_psap );
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
f_cf_adapter_down ( );
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
}
f_cf_adapter_down ( );
} // End of TC TD_VoLTE_ECO_INT_REJ_01_03
group f_TD_VoLTE_ECO_INT_REJ_01_03 {
function f_mtc_check_precond_TD_VoLTE_ECO_INT_REJ_01_03() runs on ImsTestCoordinator {
log("If the test case fails, please check the preconditions");
// TODO Add real code to check pre-conditions
} // End of function f_mtc_check_precond_TD_VoLTE_ECO_INT_REJ_01_03
} // End of group f_TD_VoLTE_ECO_INT_REJ_01_03
/**
* @desc To demonstrate interaction between UE A and P-CSCF when an emergency session is rejected.
Yann Garcia
committed
* @see ETSI TS 103 795-2 Clause 5.3.3.3 Emergency Session Reject - IMS not able to handle emergency sessions
testcase TD_VoLTE_ECO_INT_REJ_02() runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A_emergency );
var IotEquipmentUser v_psap := f_cf_create_IotEquipmentUser ( c_psap );
var ImsUserInfo v_userInfoA := f_getImUser ( PX_EUT_A_EMERGENCY );
var ImsUserInfo v_infoPsap := f_getImUser ( PX_PSAP );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_SIP_GMA_INTERFACENAME,
}))
{
var SipMessage v_sip;
f_cf_createVxLteMonitor();
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_user_up ( v_psap );
f_cf_VxLteMonitor_Up();
if (PX_PSAP_REGISTERED) {
f_mtc_userRegistration(v_psap, v_infoPsap);
} else {
// TODO Check OPTIONS from PSAP to E-CSCF
}
f_mtc_check_precond_TD_VoLTE_ECO_INT_REJ_02();
f_mtc_check_TP_GM_PCSCF_ECO_INVITE_01(vc_vxlte_monitor_components.gmA, -, v_sip); // INVITE Event 1
Yann Garcia
committed
f_mtc_check_TP_GM_PCSCF_ECO_380ALTSRV_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 2
f_mtc_check_TP_GM_PCSCF_ACK_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 3
// Postamble
f_PO_user_home_deregistration(v_ueA);
f_PO_user_home_deregistration(v_psap);
//unmap/disconnect component ports
f_cf_user_down ( v_psap );
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
f_cf_adapter_down ( );
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
}
f_cf_adapter_down ( );
} // End of TC TD_VoLTE_ECO_INT_REJ_02
group f_TD_VoLTE_ECO_INT_REJ_02 {
function f_mtc_check_precond_TD_VoLTE_ECO_INT_REJ_02() runs on ImsTestCoordinator {
log("If the test case fails, please check the preconditions");
// TODO Add real code to check pre-conditions
} // End of function f_mtc_check_precond_TD_VoLTE_ECO_INT_REJ_02
} // End of group f_TD_VoLTE_ECO_INT_REJ_02
Yann Garcia
committed
/**
* @desc To demonstrate interaction between UE A and P-CSCF when an emergency session is rejected due to wrong urn
Yann Garcia
committed
* @see ETSI TS 103 795-2 Clause 5.3.3.4 Emergency Session Reject – due to wrong urn
Yann Garcia
committed
2892
2893
2894
2895
2896
2897
2898
2899
2900
2901
2902
2903
2904
2905
2906
2907
2908
2909
2910
2911
2912
2913
2914
2915
2916
2917
2918
2919
2920
2921
2922
2923
2924
2925
2926
2927
2928
2929
2930
2931
2932
2933
2934
2935
2936
2937
2938
2939
2940
2941
2942
2943
2944
2945
2946
2947
2948
2949
2950
2951
2952
2953
2954
2955
*/
testcase TD_VoLTE_ECO_INT_REJ_03() runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A_emergency );
var IotEquipmentUser v_psap := f_cf_create_IotEquipmentUser ( c_psap );
var ImsUserInfo v_userInfoA := f_getImUser ( PX_EUT_A_EMERGENCY );
var ImsUserInfo v_infoPsap := f_getImUser ( PX_PSAP );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_SIP_GMA_INTERFACENAME,
PX_DIAMETER_GX_INTERFACENAME
}))
{
var SipMessage v_sip;
f_cf_createVxLteMonitor();
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_user_up ( v_psap );
f_cf_VxLteMonitor_Up();
// Preamble
f_mtc_userRegistration(v_ueA, v_userInfoA);
if (PX_PSAP_REGISTERED) {
f_mtc_userRegistration(v_psap, v_infoPsap);
} else {
// TODO Check OPTIONS from PSAP to E-CSCF
}
f_mtc_check_precond_TD_VoLTE_ECO_INT_REJ_03();
f_mtc_userInitiateCall (v_ueA, v_infoPsap); // Event 1
// Test body
f_mtc_check_TP_GM_PCSCF_ECO_INVITE_01(vc_vxlte_monitor_components.gmA, -, v_sip); // INVITE Event 1
f_mtc_check_TP_GM_PCSCF_ECO_380ALTSRV_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 2
f_mtc_check_TP_GM_PCSCF_ACK_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 3
// Postamble
f_PO_user_home_deregistration(v_ueA);
f_PO_user_home_deregistration(v_psap);
//unmap/disconnect component ports
f_cf_user_down ( v_psap );
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
f_cf_adapter_down ( );
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
}
f_cf_adapter_down ( );
} // End of TC TD_VoLTE_ECO_INT_REJ_03
group f_TD_VoLTE_ECO_INT_REJ_03 {
function f_mtc_check_precond_TD_VoLTE_ECO_INT_REJ_03() runs on ImsTestCoordinator {
log("If the test case fails, please check the preconditions");
// TODO Add real code to check pre-conditions
} // End of function f_mtc_check_precond_TD_VoLTE_ECO_INT_REJ_03
} // End of group f_TD_VoLTE_ECO_INT_REJ_03
} // End of group EmergencySessionAbortOrReject
} // End of group EmergencySessionEmergencyBearerOperations
/**
Yann Garcia
committed
* @see ETSI TS 103 795-2 Clause 5.5 Emergency Network Detachment
*/
group EmergencyNetworkDetachment {
group EmergencySessionDetachment {
Yann Garcia
committed
2967
2968
2969
2970
2971
2972
2973
2974
2975
2976
2977
2978
2979
2980
2981
2982
2983
2984
2985
2986
2987
2988
2989
2990
2991
2992
2993
2994
2995
2996
2997
2998
2999
3000
/**
* @desc To demonstrate UE initiated network emergency detachment (IP-CAN session termination) for a UE that has not yet emergency registered to the IMS or for UE that has been emergency registered to the IMS
* @see ETSI TS 103 795-2 Clause 5.5.1 UE Emergency Network Detachment (with/without Emergency Registration)
*/
testcase TC_VoLTE_ECO_INT_DTC_01 ( ) runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A );
var ImsUserInfo v_userInfoA := f_getImUser ( PX_EUT_A );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_DIAMETER_GX_INTERFACENAME})){
f_cf_createVxLteMonitor();
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_VxLteMonitor_Up();
//preamble
f_mtc_userRadioEnabled ( v_ueA, true, true ); // UA-A trigger an initial network_attachment by enabling radio interface of its mobile
f_mtc_userRadioEnabled ( v_ueA, false, true );
// test body
// Check that user A starts initial network attachment
f_mtc_check_TP_GX_PCRF_EMC_CCA_01(vc_vxlte_monitor_components.gx, false);//f_mtc_check_TP_GX_PCRF_ECO_CCA_02 ( vc_vxlte_monitor_components.gx, false ); // Check (CCA – Event 3)
//postamble
//unmap/disconnect component ports
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
f_cf_adapter_down ( );
}else{
//log...