Newer
Older
/**
* @author TTF 010
* @version $Id: $
* @desc This module provides ATS specific test case definitions for IMS Emergency calls.
* @see ETSI TS 103 795-2
*/
module AtsImsIot_Emergency {
// LibCommon
// LibSip
// LibIms
import from LibIot_TestInterface all;
import from LibIot_TestConfiguration all;
import from LibIot_PIXITS all;
import from LibIot_VxLTE_PIXITS all;
import from LibIot_VxLTE_Functions all;
// LibImsIot
import from AtsImsIot_TestConfiguration all;
import from AtsImsIot_TestSystem all;
import from AtsImsIot_Functions all;
import from AtsImsIot_Templates all;
import from AtsImsIot_TP_behavior_GM all;
import from AtsImsIot_TP_behavior_MW_PS all;
import from AtsImsIot_TP_behavior_MW_SI all;
import from AtsImsIot_TP_behavior_MW_IS all;
import from AtsImsIot_TP_behavior_MW_EC all;
import from AtsImsIot_TP_behavior_MW_EB all;
import from AtsImsIot_TP_behavior_Mx_LRF all; // FIXME Rename into MX_
import from AtsImsIot_TP_behavior_MM all;
import from AtsImsIot_TP_behavior_ML all;
import from AtsImsIot_TP_behavior_IC all;
import from AtsImsIot_TP_behavior_CX all;
import from AtsImsIot_TP_behavior_GX all;
import from AtsImsIot_TP_behavior_ISC all;
import from AtsImsIot_TP_behavior_S6A all;
import from AtsImsIot_TP_behavior_S9 all;
import from AtsImsIot_TP_behavior_SH all;
import from AtsImsIot_TP_behavior_RX all;
/**
* @see ETSI TS 103 795-2 Clause 5 Test Descriptions (Interoperability at HPLMN)
*/
group Interoperability {
/**
* @see ETSI TS 103 795-2 Clause 5.1 Network Attachment
*/
group NetworkAttachment {
group UENetworkAttachmentWithUSIM {
/**
* @desc Emergency Network Attachment and Establishment of the Emergency Bearer with USIM.
* On successful emergency attachment, the UE/IVS should discover the P-CSCF IP address.
* The EPC will create the Emergency Bearers which will allow communication only between the UE and the P-CSCF
* and allowed forwarding towards E-CSCF
* @see TS 124 229 [2], clause 9.2.1 and L.2.2.6; TS 129 212 [7], clauses 4.5.15 and 4a.5.12;
* TS 129 272 [8], clause 5.2.1.1 (MME shall proceed even if Update Location fails)
*
*/
testcase TC_VoLTE_ECO_INT_ATT_01 ( ) runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A );
var ImsUserInfo v_userInfoA := f_getImUser ( PX_EUT_A );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_DIAMETER_GX_INTERFACENAME,PX_DIAMETER_S6A_INTERFACENAME})){
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_VxLteMonitor_Up();
// preamble
f_mtc_userRadioEnabled ( v_ueA, true, true ); // UA-A trigger an initial network_attachment by enabling radio interface of its mobile
// test body
// Check that user A starts initial network attachment
f_mtc_check_TP_S6A_MME_ULR_01 ( vc_vxlte_monitor_components.s6a, true ); // Check (ULR – Event 2)
f_mtc_check_TP_S6A_HSS_ECO_ULA_01 ( vc_vxlte_monitor_components.s6a); // Check (ULA – Event 3)
f_mtc_check_TP_GX_PCRF_ECO_CCA_01 ( vc_vxlte_monitor_components.gx); // Check (CCR, CCA – Events 4, 5)
// postamble
f_mtc_userRadioEnabled ( v_ueA, false, true );
//unmap/disconnect component ports
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
f_cf_adapter_down ( );
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
}
} // End of group UENetworkAttachmentWithUSIM
group UENetworkAttachmentWithoutUSIM {
/**
* @desc Emergency Network Attachment and Establishment of the Emergency Bearer without USIM.
* On successful emergency attachment, the UE/IVS should discover the P-CSCF IP address.
* The EPC will create the Emergency Bearers which will allow communication only between the UE and the P-CSCF
* and allowed forwarding towards E-CSCF
* @see TS 124 229 [2], clause 9.2.1 and L.2.2.6; TS 129 212 [7], clauses 4.5.15 and 4a.5.12;
* TS 129 272 [8], clause 5.2.1.1 (MME shall proceed even if Update Location fails)
*
*/
testcase TC_VoLTE_EMC_INT_ATT_02 ( ) runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A );
var ImsUserInfo v_userInfoA := f_getImUser ( PX_EUT_A );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_DIAMETER_GX_INTERFACENAME,PX_DIAMETER_S6A_INTERFACENAME})){
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_VxLteMonitor_Up();
// preamble
f_mtc_userRadioEnabled ( v_ueA, true, true ); // UA-A trigger an initial network_attachment by enabling radio interface of its mobile
// test body
// Check that user A starts initial network attachment
f_mtc_check_TP_S6A_MME_ULR_01 ( vc_vxlte_monitor_components.s6a, true ); // Check (ULR – Event 2)
f_mtc_check_TP_S6A_HSS_ECO_ULA_01 ( vc_vxlte_monitor_components.s6a); // Check (ULA – Event 3)
f_mtc_check_TP_GX_PCRF_EMC_CCA_01 ( vc_vxlte_monitor_components.gx); // Check (CCR, CCA – Events 4, 5)
// postamble
f_mtc_userRadioEnabled ( v_ueA, false, true );
//unmap/disconnect component ports
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
f_cf_adapter_down ( );
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
}
} // End of TC TC_VoLTE_ECO_INT_ATT_02
} // End of group UENetworkAttachmentWithoutUSIM
} // End of group NetworkAttachment
/**
* @see ETSI TS 103 795-2 Clause 5.2 IMS Emergency Registration
*/
group EmergencyRegistration {
/**
* @desc To perform emergency registration via the established emergency bearer. Note that some UEs perform emergency registration automatically on attachment - in which case this test becomes merged with the previous ones.
* @see ETSI TS 103 795-2 Clause 5.2.1 IMS Emergency Registration - Successful
*/
testcase TD_VoLTE_ECO_INT_REG_01() runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A_emergency );
var ImsUserInfo v_userInfoA := f_getSipUserId ( PX_EUT_A_EMERGENCY );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_SIP_GMA_INTERFACENAME,
PX_SIP_MW_PI_INTERFACENAME,
PX_SIP_MW_IS_INTERFACENAME,
PX_DIAMETER_CX_SH_INTERFACENAME,
PX_DIAMETER_CX_IH_INTERFACENAME,
PX_DIAMETER_RX_INTERFACENAME,
PX_DIAMETER_GX_INTERFACENAME}))
{
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_VxLteMonitor_Up();
// preamble
f_mtc_userRadioEnabled ( v_ueA, true, true ); // UA-A trigger an initial network_attachment by enabling radio interface of its mobile
f_mtc_check_TP_GM_PCSCF_ECO_REGISTER_01(vc_vxlte_monitor_components.gmA); // Events 1, 12
f_mtc_check_TP_MW_PCSCF_ECO_REGISTER_01(vc_vxlte_monitor_components.mwPI); // Event 4, 11
f_mtc_check_TP_MW_ICSCF_ECO_REGISTER_01(vc_vxlte_monitor_components.mwIS, true); // Event 7, 10
f_mtc_check_TP_CX_HSS_ECO_UAA_01(f_getCxInterface(PX_DIAMETER_CX_SINGLE_INTERFACE));// Event 5, 6
f_mtc_check_TP_CX_HSS_MAA_01(vc_vxlte_monitor_components.cxSH);// Event 8, 9
f_mtc_check_TP_GM_PCSCF_ECO_REGISTER_02(vc_vxlte_monitor_components.gmA); // Events 13, 22
f_mtc_check_TP_MW_PCSCF_ECO_REGISTER_02(vc_vxlte_monitor_components.mwPI); // Events 14, 21
f_mtc_check_TP_MW_ICSCF_ECO_REGISTER_02(vc_vxlte_monitor_components.mwIS, true); // Event 17, 20
f_mtc_check_TP_CX_HSS_ECO_UAA_02(f_getCxInterface(PX_DIAMETER_CX_SINGLE_INTERFACE));// Event 15, 16
f_mtc_check_TP_CX_HSS_SAA_01(vc_vxlte_monitor_components.cxSH);// Event 18, 19
// postamble
f_PO_user_home_deregistration ( v_ueA );
f_mtc_userRadioEnabled ( v_ueA, false, true );
//unmap/disconnet component ports
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
f_cf_adapter_down ( );
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs");
}
} // End of testcase TD_VoLTE_ECO_INT_REG_01
/**
* @desc To attempt initial emergency registration via the established emergency bearer. In this case, the emergency registration is not successful due to not accepted UE credentials. Emergency call can be established without emergency registration.
* @see ETSI TS 103 795-2 Clause 5.2.2 IMS Emergency Registration - Unsuccessful
*/
testcase TD_VoLTE_ECO_INT_REG_02() runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A_emergency );
var ImsUserInfo v_userInfoA := f_getSipUserId ( PX_EUT_A_EMERGENCY );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_SIP_GMA_INTERFACENAME,
PX_SIP_MW_PI_INTERFACENAME,
PX_SIP_MW_IS_INTERFACENAME,
PX_DIAMETER_CX_SH_INTERFACENAME,
PX_DIAMETER_CX_IH_INTERFACENAME,
PX_DIAMETER_RX_INTERFACENAME,
PX_DIAMETER_GX_INTERFACENAME}))
{
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_VxLteMonitor_Up();
// preamble
f_mtc_userRadioEnabled ( v_ueA, true, true ); // UA-A trigger an initial network_attachment by enabling radio interface of its mobile
f_mtc_check_TP_GM_PCSCF_ECO_REGISTER_01(vc_vxlte_monitor_components.gmA); // Events 1, 12
f_mtc_check_TP_MW_PCSCF_ECO_REGISTER_01(vc_vxlte_monitor_components.mwPI); // Event 4, 11
f_mtc_check_TP_MW_ICSCF_ECO_REGISTER_01(vc_vxlte_monitor_components.mwIS, true); // Event 7, 10
f_mtc_check_TP_CX_HSS_ECO_UAA_01(f_getCxInterface(PX_DIAMETER_CX_SINGLE_INTERFACE));// Event 5, 6
f_mtc_check_TP_CX_HSS_MAA_01(vc_vxlte_monitor_components.cxSH);// Event 8, 9
f_mtc_check_TP_GM_PCSCF_ECO_REGISTER_03(vc_vxlte_monitor_components.gmA); // Events 13, 22
f_mtc_check_TP_MW_PCSCF_ECO_REGISTER_03(vc_vxlte_monitor_components.mwPI); // Events 14, 21
f_mtc_check_TP_MW_ICSCF_REGISTER_03(vc_vxlte_monitor_components.mwIS, true); // Event 17, 20
f_mtc_check_TP_CX_HSS_ECO_ECO_UAA_02(f_getCxInterface(PX_DIAMETER_CX_SINGLE_INTERFACE));// Event 15, 16
f_mtc_check_TP_CX_HSS_SAA_01(vc_vxlte_monitor_components.cxSH);// Event 18, 19
// postamble
f_PO_user_home_deregistration ( v_ueA );
f_mtc_userRadioEnabled ( v_ueA, false, true );
//unmap/disconnet component ports
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
f_cf_adapter_down ( );
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs");
}
} // End of testcase TD_VoLTE_ECO_INT_REG_02
} // End of group EmergencyRegistration
/**
* @see ETSI TS 103 795-2 Clause 5.3 Emergency Session and Emergency Bearer Operations
*/
group EmergencySessionEmergencyBearerOperations {
group EmergencySessionEstablishment {
* @desc To demonstrate the establishment of dedicated bearers at the originating EPC due to SIP emergency session establishment within an emergency registration.
* PSAP is located in the IM CN subsystem of IMS A
* @see ETSI TS 103 795-2 Clause 5.3.1.2 UE calling PSAP with emergency registration
*/
testcase TD_VoLTE_ECO_INT_INI_01() runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A_emergency );
var IotEquipmentUser v_psap := f_cf_create_IotEquipmentUser ( c_psap );
var ImsUserInfo v_userInfoA := f_getImUser ( PX_EUT_A_EMERGENCY );
var ImsUserInfo v_infoPsap := f_getImUser ( PX_PSAP );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_SIP_GMA_INTERFACENAME,
PX_DIAMETER_GX_INTERFACENAME,
PX_DIAMETER_RX_INTERFACENAME,
PX_SIP_MW_PE_INTERFACENAME,
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_user_up ( v_psap );
f_cf_VxLteMonitor_Up();
if (PX_PSAP_REGISTERED) {
} else {
// TODO Check OPTIONS from PSAP to E-CSCF
}
f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_01();
// Test body
//f_mtc_userInitiateCall (v_ueA, v_userTelInfoB);
f_mtc_check_TP_GM_PCSCF_ECO_INVITE_02(vc_vxlte_monitor_components.gmA, -, v_sip); // INVITE Event 1
f_mtc_check_TP_GM_PCSCF_ECO_100Trying_01(vc_vxlte_monitor_components.gmA, -, v_sip);
//Rx/Gx exchange after INVITE (SDP) was received at P-CSCF
f_mtc_check_TP_RX_PCSCF_AAR_03(vc_vxlte_monitor_components.rx);// Event 2
f_mtc_check_TP_GX_PCRF_RAR_01(vc_vxlte_monitor_components.gx, true); // Event 3
f_mtc_check_TP_GX_PGW_RAA_02(vc_vxlte_monitor_components.gx); // Event 4
f_mtc_check_TP_RX_PCRF_AAA_02(vc_vxlte_monitor_components.rx); // Event 5
f_mtc_check_TP_RX_PCSCF_RAA_01(vc_vxlte_monitor_components.rx);// Events 7,8
f_mtc_check_TP_GX_PCRF_CCA_01(vc_vxlte_monitor_components.gx); // Events 6,9
f_mtc_check_TP_MW_PCSCF_ECO_INVITE_02(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 10
f_mtc_check_TP_MW_PCSCF_ECO_100Trying_01(vc_vxlte_monitor_components.mwPE, -, v_sip);
f_mtc_check_TP_MM_ECSCF_ECO_INVITE_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // Event 11
f_mtc_check_TP_MM_ECSCF_ECO_100Trying_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip);
f_mtc_check_TP_MM_ECSCF_ECO_183SESSION_PROGRESS_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // 183 In Progress Event 12
f_mtc_check_TP_MW_PCSCF_ECO_183SESSION_PROGRESS_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 13
f_mtc_check_TP_GM_PCSCF_183SESSION_PROGRESS_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 18
//Rx/Gx exchange after 183(SDP) was received at P-CSCF
f_mtc_check_TP_RX_PCSCF_AAR_04(vc_vxlte_monitor_components.rx);// Event 14
f_mtc_check_TP_GX_PCRF_RAR_01(vc_vxlte_monitor_components.gx, true); // Event 15
f_mtc_check_TP_GX_PGW_RAA_02(vc_vxlte_monitor_components.gx); // Event 16
f_mtc_check_TP_RX_PCRF_AAA_02(vc_vxlte_monitor_components.rx); // Event 17
f_mtc_check_TP_MM_ECSCF_ECO_180RINGING_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // 180 Ringing – Event 20
f_mtc_check_TP_MW_PCSCF_ECO_180RINGING_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 21
f_mtc_check_TP_GM_PCSCF_180RINGING_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 22
f_mtc_userCheckRinging(v_psap); // Event 19
f_mtc_userCheckPeerIsRinging(v_ueA); // Event 19
f_mtc_userAnswerCall(v_psap); // Event 26
f_mtc_check_TP_MM_ECSCF_ECO_200OK_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // 200 OK Event 23
f_mtc_check_TP_MW_PCSCF_ECO_200OK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 24
f_mtc_check_TP_GM_PCSCF_200OK_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 25
f_mtc_check_TP_GM_PCSCF_ACK_01(vc_vxlte_monitor_components.gmA, -, v_sip); // ACK Event 26
f_mtc_check_TP_MW_PCSCF_ECO_ACK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 27
f_mtc_check_TP_MM_ECSCF_ECO_ACK_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // ACK – Event 28
f_mtc_userCheckCallEstablished(v_ueA); // Event 29
f_mtc_userCheckCallEstablished(v_psap); // Event 29
// Postamble
f_mtc_EndCall(v_ueA);
f_PO_user_home_deregistration(v_ueA);
f_PO_user_home_deregistration(v_psap);
//f_cf_int_call_down(v_config);
//unmap/disconnect component ports
f_cf_user_down ( v_psap );
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
}
f_cf_adapter_down ( );
} // End of TC TD_VoLTE_ECO_INT_INI_01
group f_TD_VoLTE_ECO_INT_INI_01 {
function f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_01() runs on ImsTestCoordinator {
log("If the test case fails, please check the preconditions");
// TODO Add real code to check pre-conditions
} // End of function f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_01
} // End of group f_TD_VoLTE_ECO_INT_INI_01
* @desc To demonstrate the establishment of dedicated bearers at the originating EPC due to SIP emergency session session establishment within non-emergency registration.
* PSAP is located in the IM CN subsystem of IMS A.
* @see ETSI TS 103 795-2 Clause 5.3.1.3 UE calling PSAP with non-emergency registration
* @remark This is option2: IBCF is connected to the PSAP, the interface IBCF and the PSAP is the Mm interface
*/
testcase TD_VoLTE_ECO_INT_INI_02() runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A_emergency );
var IotEquipmentUser v_psap := f_cf_create_IotEquipmentUser ( c_psap );
var ImsUserInfo v_userInfoA := f_getImUser ( PX_EUT_A_EMERGENCY );
var ImsUserInfo v_infoPsap := f_getImUser ( PX_PSAP );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_SIP_GMA_INTERFACENAME,
PX_DIAMETER_GX_INTERFACENAME,
PX_DIAMETER_RX_INTERFACENAME,
PX_SIP_MW_PE_INTERFACENAME,
}))
{
var SipMessage v_sip;
f_cf_createVxLteMonitor();
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_user_up ( v_psap );
f_cf_VxLteMonitor_Up();
// Preamble
if (PX_PSAP_REGISTERED) {
} else {
// TODO Check OPTIONS from PSAP to E-CSCF
}
f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_02();
// Test body
//f_mtc_userInitiateCall (v_ueA, v_userTelInfoB);
f_mtc_check_TP_GM_PCSCF_ECO_INVITE_03(vc_vxlte_monitor_components.gmA, -, v_sip); // INVITE Event 1
f_mtc_check_TP_GM_PCSCF_ECO_100Trying_01(vc_vxlte_monitor_components.gmA, -, v_sip);
//Rx/Gx exchange after INVITE (SDP) was received at P-CSCF
f_mtc_check_TP_RX_PCSCF_AAR_03(vc_vxlte_monitor_components.rx);// Event 2
f_mtc_check_TP_GX_PCRF_RAR_01(vc_vxlte_monitor_components.gx, true); // Event 3
f_mtc_check_TP_GX_PGW_RAA_02(vc_vxlte_monitor_components.gx); // Event 4
f_mtc_check_TP_RX_PCRF_AAA_02(vc_vxlte_monitor_components.rx); // Event 5
f_mtc_check_TP_RX_PCSCF_RAA_01(vc_vxlte_monitor_components.rx);// Events 7,8
f_mtc_check_TP_GX_PCRF_CCA_01(vc_vxlte_monitor_components.gx); // Events 6,9
f_mtc_check_TP_MW_PCSCF_ECO_INVITE_03(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 10
f_mtc_check_TP_MW_PCSCF_ECO_100Trying_01(vc_vxlte_monitor_components.mwPE, -, v_sip);
f_mtc_check_TP_MM_ECSCF_ECO_INVITE_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // Event 11
f_mtc_check_TP_MM_ECSCF_ECO_100Trying_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip);
// 183 Session Progress
f_mtc_check_TP_MM_ECSCF_ECO_183SESSION_PROGRESS_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // 183 In Progress Event 12
f_mtc_check_TP_MW_PCSCF_ECO_183SESSION_PROGRESS_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 13
f_mtc_check_TP_GM_PCSCF_183SESSION_PROGRESS_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 18
//Rx/Gx exchange after 183(SDP) was received at P-CSCF
f_mtc_check_TP_RX_PCSCF_AAR_04(vc_vxlte_monitor_components.rx);// Event 14
f_mtc_check_TP_GX_PCRF_RAR_01(vc_vxlte_monitor_components.gx, true); // Event 15
f_mtc_check_TP_GX_PGW_RAA_02(vc_vxlte_monitor_components.gx); // Event 16
f_mtc_check_TP_RX_PCRF_AAA_02(vc_vxlte_monitor_components.rx); // Event 17
f_mtc_check_TP_MM_ECSCF_ECO_180RINGING_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // 180 Ringing – Event 22
f_mtc_check_TP_MW_PCSCF_ECO_180RINGING_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 24
f_mtc_check_TP_GM_PCSCF_180RINGING_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 25
f_mtc_userCheckRinging(v_psap); // Event 19
f_mtc_userCheckPeerIsRinging(v_ueA); // Event 19
f_mtc_userAnswerCall(v_psap); // Event 26
f_mtc_check_TP_MM_ECSCF_ECO_200OK_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // 200 OK Event 23
f_mtc_check_TP_MW_PCSCF_ECO_200OK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 24
f_mtc_check_TP_GM_PCSCF_200OK_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 25
f_mtc_check_TP_GM_PCSCF_ACK_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 26
f_mtc_check_TP_MW_PCSCF_ECO_ACK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 27
f_mtc_check_TP_MM_ECSCF_ECO_ACK_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // ACK – Event 28
f_mtc_userCheckCallEstablished(v_ueA); // Event 29
f_mtc_userCheckCallEstablished(v_psap); // Event 29
// Postamble
f_mtc_EndCall(v_ueA);
f_PO_user_home_deregistration(v_ueA);
f_PO_user_home_deregistration(v_psap);
//f_cf_int_call_down(v_config);
//unmap/disconnect component ports
f_cf_user_down ( v_psap );
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
}
f_cf_adapter_down ( );
} // End of TC TD_VoLTE_ECO_INT_INI_02
group f_TD_VoLTE_ECO_INT_INI_02 {
function f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_02() runs on ImsTestCoordinator {
log("If the test case fails, please check the preconditions");
// TODO Add real code to check pre-conditions
} // End of function f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_02
} // End of group f_TD_VoLTE_ECO_INT_INI_02
* @desc To demonstrate the establishment of emergency bearers at the originating EPC due to SIP emergency session establishment without any registration.
* PSAP is located in the IM CN subsystem of IMS A.
* @see ETSI TS 103 795-2 Clause 5.3.1.4 UE calling PSAP without any registration
*/
testcase TD_VoLTE_ECO_INT_INI_03() runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A );
var IotEquipmentUser v_psap := f_cf_create_IotEquipmentUser ( c_psap );
var ImsUserInfo v_infoPsap := f_getImUser ( PX_PSAP );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_SIP_GMA_INTERFACENAME,
PX_DIAMETER_GX_INTERFACENAME,
PX_DIAMETER_RX_INTERFACENAME,
PX_SIP_MW_PE_INTERFACENAME,
}))
{
var SipMessage v_sip;
f_cf_createVxLteMonitor();
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_user_up ( v_psap );
f_cf_VxLteMonitor_Up();
// Preamble
// No registration for user A
f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_03();
// Test body
//f_mtc_userInitiateCall (v_ueA, v_userTelInfoB);
f_mtc_check_TP_GM_PCSCF_ECO_INVITE_01(vc_vxlte_monitor_components.gmA, -, v_sip); // INVITE Event 1
f_mtc_check_TP_GM_PCSCF_ECO_100Trying_01(vc_vxlte_monitor_components.gmA, -, v_sip);
//Rx/Gx exchange after INVITE (SDP) was received at P-CSCF
f_mtc_check_TP_RX_PCSCF_AAR_03(vc_vxlte_monitor_components.rx);// Event 2
f_mtc_check_TP_GX_PCRF_RAR_01(vc_vxlte_monitor_components.gx, true); // Event 3
f_mtc_check_TP_GX_PGW_RAA_02(vc_vxlte_monitor_components.gx); // Event 4
f_mtc_check_TP_RX_PCRF_AAA_02(vc_vxlte_monitor_components.rx); // Event 5
f_mtc_check_TP_RX_PCSCF_RAA_01(vc_vxlte_monitor_components.rx);// Events 7,8
f_mtc_check_TP_GX_PCRF_CCA_01(vc_vxlte_monitor_components.gx); // Events 6,9
f_mtc_check_TP_MW_PCSCF_ECO_INVITE_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 10
f_mtc_check_TP_MW_PCSCF_ECO_100Trying_01(vc_vxlte_monitor_components.mwPE, -, v_sip);
f_mtc_check_TP_MM_ECSCF_ECO_INVITE_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // Event 11
f_mtc_check_TP_MM_ECSCF_ECO_100Trying_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip);
// 183 Session Progress
f_mtc_check_TP_MM_ECSCF_ECO_183SESSION_PROGRESS_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // 183 In Progress Event 12
f_mtc_check_TP_MW_PCSCF_ECO_183SESSION_PROGRESS_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 13
f_mtc_check_TP_GM_PCSCF_183SESSION_PROGRESS_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 18
//Rx/Gx exchange after 183(SDP) was received at P-CSCF
f_mtc_check_TP_RX_PCSCF_AAR_04(vc_vxlte_monitor_components.rx);// Event 14
f_mtc_check_TP_GX_PCRF_RAR_01(vc_vxlte_monitor_components.gx, true); // Event 15
f_mtc_check_TP_GX_PGW_RAA_02(vc_vxlte_monitor_components.gx); // Event 16
f_mtc_check_TP_RX_PCRF_AAA_02(vc_vxlte_monitor_components.rx); // Event 17
f_mtc_check_TP_MM_ECSCF_ECO_180RINGING_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // 180 Ringing – Event 22
f_mtc_check_TP_MW_PCSCF_ECO_180RINGING_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 24
f_mtc_check_TP_GM_PCSCF_180RINGING_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 25
f_mtc_userCheckRinging(v_psap); // Event 19
f_mtc_userCheckPeerIsRinging(v_ueA); // Event 19
f_mtc_userAnswerCall(v_psap); // Event 26
f_mtc_check_TP_MM_ECSCF_ECO_200OK_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // 200 OK Event 23
f_mtc_check_TP_MW_PCSCF_ECO_200OK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 24
f_mtc_check_TP_GM_PCSCF_200OK_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 25
f_mtc_check_TP_GM_PCSCF_ACK_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 26
f_mtc_check_TP_MW_PCSCF_ECO_ACK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 27
f_mtc_check_TP_MM_ECSCF_ECO_ACK_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // ACK – Event 28
f_mtc_userCheckCallEstablished(v_ueA); // Event 29
f_mtc_userCheckCallEstablished(v_psap); // Event 29
// Postamble
f_mtc_EndCall(v_ueA);
f_PO_user_home_deregistration(v_ueA);
f_PO_user_home_deregistration(v_psap);
//f_cf_int_call_down(v_config);
//unmap/disconnect component ports
f_cf_user_down ( v_psap );
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
}
f_cf_adapter_down ( );
} // End of TC TD_VoLTE_ECO_INT_INI_03
group f_TD_VoLTE_ECO_INT_INI_03 {
function f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_03() runs on ImsTestCoordinator {
log("If the test case fails, please check the preconditions");
// TODO Add real code to check pre-conditions
} // End of function f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_03
} // End of group f_TD_VoLTE_ECO_INT_INI_03
/**
* @desc To demonstrate the establishment of dedicated bearers at the originating EPC due to SIP emergency session establishment within an emergency registration.
* PSAP is located in the IM CN subsystem of IMS A. The PSAP URI is delivered by the LRF.
* @see ETSI TS 103 795-2 Clause 5.3.1.5 UE calling PSAP in same network, LRF derived PSAP URI
* @remark This is option2: IBCF is connected to the PSAP, the interface IBCF and the PSAP is the Mm interface
*/
testcase TD_VoLTE_ECO_INT_INI_04() runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A_emergency );
var IotEquipmentUser v_psap := f_cf_create_IotEquipmentUser ( c_psap );
var ImsUserInfo v_userInfoA := f_getImUser ( PX_EUT_A_EMERGENCY );
var ImsUserInfo v_infoPsap := f_getImUser ( PX_PSAP );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_SIP_GMA_INTERFACENAME,
PX_DIAMETER_GX_INTERFACENAME,
PX_DIAMETER_RX_INTERFACENAME,
PX_SIP_MW_PE_INTERFACENAME,
PX_SIP_ML_LRF_INTERFACENAME // E-CSCF -> LRF
}))
{
var SipMessage v_sip;
f_cf_createVxLteMonitor();
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_user_up ( v_psap );
f_cf_VxLteMonitor_Up();
// Preamble
} else {
// TODO Check OPTIONS from PSAP to E-CSCF
}
f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_01();
// Test body
//f_mtc_userInitiateCall (v_ueA, v_userTelInfoB);
f_mtc_check_TP_GM_PCSCF_ECO_INVITE_02(vc_vxlte_monitor_components.gmA, -, v_sip); // INVITE Event 1
f_mtc_check_TP_GM_PCSCF_ECO_100Trying_01(vc_vxlte_monitor_components.gmA, -, v_sip);
//Rx/Gx exchange after INVITE (SDP) was received at P-CSCF
f_mtc_check_TP_RX_PCSCF_AAR_03(vc_vxlte_monitor_components.rx);// Event 2
f_mtc_check_TP_GX_PCRF_RAR_01(vc_vxlte_monitor_components.gx, true); // Event 3
f_mtc_check_TP_GX_PGW_RAA_02(vc_vxlte_monitor_components.gx); // Event 4
f_mtc_check_TP_RX_PCRF_AAA_02(vc_vxlte_monitor_components.rx); // Event 5
f_mtc_check_TP_RX_PCSCF_RAA_01(vc_vxlte_monitor_components.rx);// Events 7,8
f_mtc_check_TP_GX_PCRF_CCA_01(vc_vxlte_monitor_components.gx); // Events 6,9
f_mtc_check_TP_MW_PCSCF_ECO_INVITE_02(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 10
f_mtc_check_TP_MW_PCSCF_ECO_100Trying_01(vc_vxlte_monitor_components.mwPE, -, v_sip);
f_mtc_check_TP_ML_ECSCF_ECO_INVITE_02(vc_vxlte_monitor_components.mlE_LRF, -, v_sip); // Event 11
f_mtc_check_TP_ML_ECSCF_ECO_3xx_01(vc_vxlte_monitor_components.mlE_LRF, -, v_sip); // Event 12
f_mtc_check_TP_MM_ECSCF_ECO_INVITE_02(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // Event 13
f_mtc_check_TP_MM_ECSCF_ECO_100Trying_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip);
f_mtc_check_TP_MM_ECSCF_ECO_183SESSION_PROGRESS_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // 183 In Progress Event 14
f_mtc_check_TP_MW_PCSCF_ECO_183SESSION_PROGRESS_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 15
f_mtc_check_TP_GM_PCSCF_183SESSION_PROGRESS_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 20
//Rx/Gx exchange after 183(SDP) was received at P-CSCF
f_mtc_check_TP_RX_PCSCF_AAR_04(vc_vxlte_monitor_components.rx);// Event 14
f_mtc_check_TP_GX_PCRF_RAR_01(vc_vxlte_monitor_components.gx, true); // Event 15
f_mtc_check_TP_GX_PGW_RAA_02(vc_vxlte_monitor_components.gx); // Event 16
f_mtc_check_TP_RX_PCRF_AAA_02(vc_vxlte_monitor_components.rx); // Event 17
f_mtc_check_TP_MM_ECSCF_ECO_180RINGING_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // 180 Ringing – Event 22
f_mtc_check_TP_MW_PCSCF_ECO_180RINGING_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 23
f_mtc_check_TP_GM_PCSCF_180RINGING_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 24
f_mtc_userCheckRinging(v_psap); // Event 21
f_mtc_userCheckPeerIsRinging(v_ueA); // Event 21
f_mtc_userAnswerCall(v_psap); // Event 28
f_mtc_check_TP_MM_ECSCF_ECO_200OK_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // 200 OK Event 25
f_mtc_check_TP_MW_PCSCF_ECO_200OK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 26
f_mtc_check_TP_GM_PCSCF_200OK_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 27
f_mtc_check_TP_GM_PCSCF_ACK_01(vc_vxlte_monitor_components.gmA, -, v_sip); // ACK Event 28
f_mtc_check_TP_MW_PCSCF_ECO_ACK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 29
f_mtc_check_TP_MM_ECSCF_ECO_ACK_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // ACK – Event 30
f_mtc_userCheckCallEstablished(v_ueA); // Event 31
f_mtc_userCheckCallEstablished(v_psap); // Event 31
// Postamble
f_mtc_EndCall(v_ueA);
f_PO_user_home_deregistration(v_ueA);
f_PO_user_home_deregistration(v_psap);
//f_cf_int_call_down(v_config);
//unmap/disconnect component ports
f_cf_user_down ( v_psap );
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
}
f_cf_adapter_down ( );
} // End of TC TD_VoLTE_ECO_INT_INI_04
group f_TD_VoLTE_ECO_INT_INI_04 {
function f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_04() runs on ImsTestCoordinator {
log("If the test case fails, please check the preconditions");
// TODO Add real code to check pre-conditions
} // End of function f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_04
} // End of group f_TD_VoLTE_ECO_INT_INI_04
/**
* @desc To demonstrate the establishment of dedicated bearers at the originating EPC due to SIP emergency session establishment within an emergency registration.
* PSAP is located in the IM CN subsystem of another network connected via IBCF.
* @see ETSI TS 103 795-2 Clause 5.3.1.6 UE calling PSAP in other network via IBCF
testcase TD_VoLTE_ECO_INT_INI_05 ( ) runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A_emergency );
var IotEquipmentUser v_psap := f_cf_create_IotEquipmentUser ( c_psap );
var ImsUserInfo v_userInfoA := f_getImUser ( PX_EUT_A_EMERGENCY );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_SIP_GMA_INTERFACENAME,
PX_DIAMETER_GX_INTERFACENAME,
PX_DIAMETER_RX_INTERFACENAME,
PX_SIP_MW_PE_INTERFACENAME,
PX_SIP_IC_INTERFACENAME // IBCF -> IMS_B -> PSAP
}))
{
var SipMessage v_sip;
f_cf_createVxLteMonitor();
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_user_up ( v_psap );
f_cf_VxLteMonitor_Up();
// Preamble
f_mtc_userRegistration(v_ueA, v_userInfoA);
if (PX_PSAP_REGISTERED) {
f_mtc_userRegistration(v_psap, v_infoPsap);
} else {
// TODO Check OPTIONS from PSAP to E-CSCF
}
f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_05();
// Test body
//f_mtc_userInitiateCall (v_ueA, v_userTelInfoB);
f_mtc_check_TP_GM_PCSCF_ECO_INVITE_02(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 1
f_mtc_check_TP_GM_PCSCF_ECO_100Trying_01(vc_vxlte_monitor_components.gmA, -, v_sip);
//Rx/Gx exchange after INVITE (SDP) was received at P-CSCF
f_mtc_check_TP_RX_PCSCF_AAR_03(vc_vxlte_monitor_components.rx);// Event 2
f_mtc_check_TP_GX_PCRF_RAR_01(vc_vxlte_monitor_components.gx, true); // Event 3
f_mtc_check_TP_GX_PGW_RAA_02(vc_vxlte_monitor_components.gx); // Event 4
f_mtc_check_TP_RX_PCRF_AAA_02(vc_vxlte_monitor_components.rx); // Event 5
f_mtc_check_TP_RX_PCSCF_RAA_01(vc_vxlte_monitor_components.rx);// Events 7,8
//f_mtc_check_TP_GX_PCRF_CCA_01(vc_vxlte_monitor_components.gx); // Events 6,9
f_mtc_check_TP_MW_PCSCF_ECO_INVITE_02(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 10
f_mtc_check_TP_MW_PCSCF_ECO_100Trying_01(vc_vxlte_monitor_components.mwPE, -, v_sip);
f_mtc_check_TP_MW_IBCF_INVITE_01(vc_vxlte_monitor_components.mwEB); // Event 11
f_mtc_check_TP_MW_IBSCF_100Trying_01(vc_vxlte_monitor_components.mwEB, -, v_sip);
f_mtc_check_TP_IC_IBCF_INVITE_01(vc_vxlte_monitor_components.ic, true); // INVITE Event 12 (NOTE: comment out if ISC simulated by Ic)
f_mtc_check_TP_IC_IBCF_INVITE_02(vc_vxlte_monitor_components.ic, true); // INVITE Event 12 (NOTE: comment out if ISC simulated by Ic)
f_mtc_check_TP_IC_IBCF_INVITE_03(vc_vxlte_monitor_components.ic); // INVITE ENUM Event 8
// 183 Session Progress
f_mtc_check_TP_IC_IBCF_183RESP_01(vc_vxlte_monitor_components.ic, -); // 183 Event 13
f_mtc_check_TP_MW_IBCF_183SESSION_PROGRESS_01(vc_vxlte_monitor_components.mwEB, -, v_sip); // Event 14
f_mtc_check_TP_MW_PCSCF_ECO_183SESSION_PROGRESS_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 15
f_mtc_check_TP_GM_PCSCF_183SESSION_PROGRESS_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 20
//Rx/Gx exchange after 183(SDP) was received at P-CSCF
f_mtc_check_TP_RX_PCSCF_AAR_04(vc_vxlte_monitor_components.rx);// Event 16
f_mtc_check_TP_GX_PCRF_RAR_01(vc_vxlte_monitor_components.gx, true); // Event 17
f_mtc_check_TP_GX_PGW_RAA_02(vc_vxlte_monitor_components.gx); // Event 18
f_mtc_check_TP_RX_PCRF_AAA_02(vc_vxlte_monitor_components.rx); // Event 19
f_mtc_check_TP_IC_IBCF_180RESP_01(vc_vxlte_monitor_components.ic); // 180 Ringing – Event 22
f_mtc_check_TP_MW_IBCF_180RINGING_01(vc_vxlte_monitor_components.mwEB, -, v_sip); // Event 23
f_mtc_check_TP_MW_PCSCF_ECO_180RINGING_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 24
f_mtc_check_TP_GM_PCSCF_180RINGING_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 25
f_mtc_userCheckRinging(v_psap);
f_mtc_userCheckPeerIsRinging(v_ueA);
f_mtc_userAnswerCall(v_psap);
f_mtc_check_TP_IC_IBCF_2XXRESP_01(vc_vxlte_monitor_components.ic, true); // 200 OK – Event 26
f_mtc_check_TP_IC_IBCF_2XXRESP_02(vc_vxlte_monitor_components.ic, true); // 200 OK – Event 26
f_mtc_check_TP_IC_IBCF_2XXRESP_03(vc_vxlte_monitor_components.ic); // 200 OK – Event 26
f_mtc_check_TP_MW_IBCF_200OK_01(vc_vxlte_monitor_components.mwEB, -, v_sip); // Event 27
f_mtc_check_TP_MW_PCSCF_ECO_200OK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 28
f_mtc_check_TP_GM_PCSCF_200OK_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 29
f_mtc_check_TP_GM_PCSCF_ACK_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 30
f_mtc_check_TP_MW_PCSCF_ECO_ACK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 31
f_mtc_check_TP_MW_IBCF_ACK_01(vc_vxlte_monitor_components.mwEB, -, v_sip); // Event 32
f_mtc_check_TP_IC_IBCF_ACK_01(vc_vxlte_monitor_components.ic); // ACK – Event 33
f_mtc_userCheckCallEstablished(v_ueA); // Event 34
f_mtc_userCheckCallEstablished(v_psap); // Event 34
// Postamble
f_mtc_EndCall(v_ueA);
f_PO_user_home_deregistration(v_ueA);
f_PO_user_home_deregistration(v_psap);
//f_cf_int_call_down(v_config);
//unmap/disconnect component ports
f_cf_user_down ( v_psap );
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
}
f_cf_adapter_down ( );
} // End of TC TD_VoLTE_ECO_INT_INI_05
group f_TD_VoLTE_ECO_INT_INI_05 {
function f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_05() runs on ImsTestCoordinator {
log("If the test case fails, please check the preconditions");
} // End of function f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_05
} // End of f_TD_VoLTE_ECO_INT_INI_05
* @desc To demonstrate the establishment of dedicated bearers at the originating EPC due to SIP emergency session establishment within an emergency registration.
* PSAP is located in the IM CN subsystem of another network vonnected via IBCF. The PSAP URI is delivered by the LRF.
* @see ETSI TS 103 795-2 Clause 5.3.1.7 UE calling PSAP in other network via IBCF, LRF derived PSAP URI
* @remark This is option2: IBCF is connected to the PSAP, the interface IBCF and the PSAP is the Mm interface
*/
testcase TD_VoLTE_ECO_INT_INI_06() runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A_emergency );
var IotEquipmentUser v_psap := f_cf_create_IotEquipmentUser ( c_psap );
var ImsUserInfo v_userInfoA := f_getImUser ( PX_EUT_A_EMERGENCY );
var ImsUserInfo v_infoPsap := f_getImUser ( PX_PSAP );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_SIP_GMA_INTERFACENAME,
PX_DIAMETER_GX_INTERFACENAME,
PX_DIAMETER_RX_INTERFACENAME,
PX_SIP_MW_PE_INTERFACENAME,
PX_SIP_IC_INTERFACENAME, // IBCF -> IMS_B -> PSAP
PX_SIP_ML_LRF_INTERFACENAME // E-CSCF -> LRF: mlE_LRF
}))
{
var SipMessage v_sip;
f_cf_createVxLteMonitor();
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_user_up ( v_psap );
f_cf_VxLteMonitor_Up();
// Preamble
if (PX_PSAP_REGISTERED) {
f_mtc_userRegistration(v_psap, v_infoPsap);
} else {
// TODO Check OPTIONS from PSAP to E-CSCF
}
f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_06();
// Test body
//f_mtc_userInitiateCall (v_ueA, v_userTelInfoB);
f_mtc_check_TP_GM_PCSCF_ECO_INVITE_02(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 1
f_mtc_check_TP_GM_PCSCF_ECO_100Trying_01(vc_vxlte_monitor_components.gmA, -, v_sip);
//Rx/Gx exchange after INVITE (SDP) was received at P-CSCF
f_mtc_check_TP_RX_PCSCF_AAR_03(vc_vxlte_monitor_components.rx);// Event 2
f_mtc_check_TP_GX_PCRF_RAR_01(vc_vxlte_monitor_components.gx, true); // Event 3
f_mtc_check_TP_GX_PGW_RAA_02(vc_vxlte_monitor_components.gx); // Event 4
f_mtc_check_TP_RX_PCRF_AAA_02(vc_vxlte_monitor_components.rx); // Event 5
f_mtc_check_TP_RX_PCSCF_RAA_01(vc_vxlte_monitor_components.rx);// Events 7,8
//f_mtc_check_TP_GX_PCRF_CCA_01(vc_vxlte_monitor_components.gx); // Events 6,9
f_mtc_check_TP_MW_PCSCF_ECO_INVITE_02(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 10
f_mtc_check_TP_MW_PCSCF_ECO_100Trying_01(vc_vxlte_monitor_components.mwPE, -, v_sip);
// FIXME f_mtc_check_TP_MW_IBCF_xxx <--> f_mtc_check_TP_ML_EBCF_xxx
f_mtc_check_TP_MW_IBCF_INVITE_01(vc_vxlte_monitor_components.mlE_LRF); // Event 11
f_mtc_check_TP_MX_LRF_3xxAny_01(vc_vxlte_monitor_components.mlE_LRF, -, v_sip); // Event 12
f_mtc_check_TP_MW_IBCF_INVITE_02(vc_vxlte_monitor_components.mwEB); // Event 13
f_mtc_check_TP_MW_IBSCF_100Trying_01(vc_vxlte_monitor_components.mwEB, -, v_sip);
f_mtc_check_TP_IC_IBCF_INVITE_01(vc_vxlte_monitor_components.ic, true); // INVITE Event 14
f_mtc_check_TP_IC_IBCF_INVITE_02(vc_vxlte_monitor_components.ic, true); // INVITE Event 14
f_mtc_check_TP_IC_IBCF_183RESP_01(vc_vxlte_monitor_components.ic,-); // 183 Event 15
// 183 Session Progress
f_mtc_check_TP_MW_IBCF_183SESSION_PROGRESS_01(vc_vxlte_monitor_components.mwEB, -, v_sip); // Event 16
f_mtc_check_TP_MW_PCSCF_ECO_183SESSION_PROGRESS_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 17
f_mtc_check_TP_GM_PCSCF_183SESSION_PROGRESS_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 24
//Rx/Gx exchange after 183(SDP) was received at P-CSCF
f_mtc_check_TP_RX_PCSCF_AAR_04(vc_vxlte_monitor_components.rx);// Event 18
f_mtc_check_TP_GX_PCRF_RAR_01(vc_vxlte_monitor_components.gx, true); // Event 19
f_mtc_check_TP_GX_PGW_RAA_02(vc_vxlte_monitor_components.gx); // Event 20
f_mtc_check_TP_RX_PCRF_AAA_02(vc_vxlte_monitor_components.rx); // Event 21
f_mtc_check_TP_IC_IBCF_180RESP_01(vc_vxlte_monitor_components.ic, true); // 180 Ringing – Event 24
f_mtc_check_TP_MW_IBCF_180RINGING_01(vc_vxlte_monitor_components.mwEB, -, v_sip); // Event 25
f_mtc_check_TP_MW_PCSCF_ECO_180RINGING_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 26
f_mtc_check_TP_GM_PCSCF_180RINGING_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 27
f_mtc_userCheckRinging(v_psap);
f_mtc_userCheckPeerIsRinging(v_ueA);
f_mtc_userAnswerCall(v_psap);
f_mtc_check_TP_IC_IBCF_2XXRESP_01(vc_vxlte_monitor_components.ic, true); // 200 OK – Event 28
f_mtc_check_TP_IC_IBCF_2XXRESP_02(vc_vxlte_monitor_components.ic, true); // 200 OK – Event 28
f_mtc_check_TP_IC_IBCF_2XXRESP_03(vc_vxlte_monitor_components.ic); // 200 OK – Event 28
f_mtc_check_TP_MW_IBCF_200OK_01(vc_vxlte_monitor_components.mwEB, -, v_sip); // Event 29
f_mtc_check_TP_MW_PCSCF_ECO_200OK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 30
f_mtc_check_TP_GM_PCSCF_200OK_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 31
f_mtc_check_TP_GM_PCSCF_ACK_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 32
f_mtc_check_TP_MW_PCSCF_ECO_ACK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 33
f_mtc_check_TP_MW_IBCF_ACK_01(vc_vxlte_monitor_components.mwEB, -, v_sip); // Event 34
f_mtc_check_TP_IC_IBCF_ACK_01(vc_vxlte_monitor_components.ic); // ACK – Event 35
f_mtc_userCheckCallEstablished(v_ueA); // Event 36
f_mtc_userCheckCallEstablished(v_psap); // Event 36
// Postamble
f_mtc_EndCall(v_ueA);
f_PO_user_home_deregistration(v_ueA);
f_PO_user_home_deregistration(v_psap);
//f_cf_int_call_down(v_config);
//unmap/disconnect component ports
f_cf_user_down ( v_psap );
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
}
f_cf_adapter_down ( );
} // End of TC TD_VoLTE_ECO_INT_INI_06
group f_TD_VoLTE_ECO_INT_INI_06 {
function f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_06() runs on ImsTestCoordinator {
log("If the test case fails, please check the preconditions");
// TODO Add real code to check pre-conditions
} // End of function f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_06
} // End of group f_TD_VoLTE_ECO_INT_INI_06
/**
* @desc To demonstrate the establishment of dedicated bearers at the originating EPC due to SIP emergency session establishment within an emergency registration.
* PSAP is located in the PSTN connected via BGCF.
* @see ETSI TS 103 795-2 Clause 5.3.1.8 UE calling PSAP in PSTN via BGCF
*/
testcase TD_VoLTE_ECO_INT_INI_07() runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A_emergency );
var IotEquipmentUser v_psap := f_cf_create_IotEquipmentUser ( c_psap );
var ImsUserInfo v_userInfoA := f_getImUser ( PX_EUT_A_EMERGENCY );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_SIP_GMA_INTERFACENAME,
PX_DIAMETER_GX_INTERFACENAME,
PX_DIAMETER_RX_INTERFACENAME,
PX_SIP_MW_PE_INTERFACENAME,
PX_SIP_MW_EB_INTERFACENAME, // E-CSCF -> IBCF
PX_SIP_IC_INTERFACENAME // IBCF -> IMS -> PSAP
}))
{
var SipMessage v_sip;
f_cf_createVxLteMonitor();
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_user_up ( v_psap );
f_cf_VxLteMonitor_Up();
// Preamble
if (PX_PSAP_REGISTERED) {
f_mtc_userRegistration(v_psap, v_infoPsap);
} else {
// TODO Check OPTIONS from PSAP to E-CSCF
}
f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_07();
// Test body
f_mtc_check_TP_GM_PCSCF_INVITE_02(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 1
f_mtc_check_TP_GM_PCSCF_ECO_100Trying_01(vc_vxlte_monitor_components.gmA, -, v_sip);
//Rx/Gx exchange after INVITE (SDP) was received at P-CSCF
f_mtc_check_TP_RX_PCSCF_AAR_03(vc_vxlte_monitor_components.rx);// Event 2
f_mtc_check_TP_GX_PCRF_RAR_01(vc_vxlte_monitor_components.gx, true); // Event 3
f_mtc_check_TP_GX_PGW_RAA_02(vc_vxlte_monitor_components.gx); // Event 4
f_mtc_check_TP_RX_PCRF_AAA_02(vc_vxlte_monitor_components.rx); // Event 5
f_mtc_check_TP_RX_PCSCF_RAA_01(vc_vxlte_monitor_components.rx);// Events 7,8
//f_mtc_check_TP_GX_PCRF_CCA_01(vc_vxlte_monitor_components.gx); // Events 6,9
f_mtc_check_TP_MW_PCSCF_ECO_INVITE_02(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 10
f_mtc_check_TP_MW_PCSCF_ECO_100Trying_01(vc_vxlte_monitor_components.mwPE, -, v_sip);
f_mtc_check_TP_MI_BGCF_ECO_INVITE_01(vc_vxlte_monitor_components.mwEB, -, v_sip); // Event 11
f_mtc_check_TP_MI_BGCF_ECO_100Trying_01(vc_vxlte_monitor_components.mwEB, -, v_sip);
f_mtc_check_TP_MM_ECSCF_ECO_INVITE_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // Event 12
f_mtc_check_TP_MM_ECSCF_ECO_183SESSION_PROGRESS_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // Event 13
f_mtc_check_TP_MI_BGCF_ECO_183SESSION_PROGRESS_01(vc_vxlte_monitor_components.mwEB, -, v_sip); // Event 14
f_mtc_check_TP_MW_PCSCF_ECO_183SESSION_PROGRESS_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 15
f_mtc_check_TP_GM_PCSCF_183SESSION_PROGRESS_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 20
//Rx/Gx exchange after 183(SDP) was received at P-CSCF
f_mtc_check_TP_RX_PCSCF_AAR_04(vc_vxlte_monitor_components.rx);// Event 16
f_mtc_check_TP_GX_PCRF_RAR_01(vc_vxlte_monitor_components.gx, true); // Event 17
f_mtc_check_TP_GX_PGW_RAA_02(vc_vxlte_monitor_components.gx); // Event 18
f_mtc_check_TP_RX_PCRF_AAA_02(vc_vxlte_monitor_components.rx); // Event 19
f_mtc_check_TP_MM_ECSCF_ECO_180RINGING_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // 180 Ringing – Event 22
f_mtc_check_TP_MI_BGCF_ECO_180RINGING_01(vc_vxlte_monitor_components.mwEB, -, v_sip); // Event 23
f_mtc_check_TP_MW_PCSCF_ECO_180RINGING_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 24
f_mtc_check_TP_GM_PCSCF_180RINGING_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 25
f_mtc_userCheckRinging(v_psap);
f_mtc_userCheckPeerIsRinging(v_ueA);
f_mtc_userAnswerCall(v_psap);
f_mtc_check_TP_MM_ECSCF_ECO_200OK_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // 200 OK – Event 26
f_mtc_check_TP_MI_BGCF_ECO_200OK_01(vc_vxlte_monitor_components.mwEB, -, v_sip); // Event 27
f_mtc_check_TP_MW_PCSCF_ECO_200OK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 28
f_mtc_check_TP_GM_PCSCF_200OK_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 29
f_mtc_check_TP_GM_PCSCF_ACK_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 30
f_mtc_check_TP_MW_PCSCF_ECO_ACK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 31
f_mtc_check_TP_MI_BGCF_ECO_ACK_01(vc_vxlte_monitor_components.mwEB, -, v_sip); // Event 32
f_mtc_check_TP_MM_ECSCF_ECO_ACK_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // ACK – Event 33
f_mtc_userCheckCallEstablished(v_ueA); // Event 34
f_mtc_userCheckCallEstablished(v_psap); // Event 34
// Postamble
f_mtc_EndCall(v_ueA);
f_PO_user_home_deregistration(v_ueA);
f_PO_user_home_deregistration(v_psap);
//f_cf_int_call_down(v_config);
//unmap/disconnect component ports
f_cf_user_down ( v_psap );
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
}
f_cf_adapter_down ( );
} // End of TC TD_VoLTE_ECO_INT_INI_07
group f_TD_VoLTE_ECO_INT_INI_07 {
function f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_07() runs on ImsTestCoordinator {
log("If the test case fails, please check the preconditions");
// TODO Add real code to check pre-conditions
} // End of function f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_07
} // End of group f_TD_VoLTE_ECO_INT_INI_07
/**
* @desc To demonstrate the establishment of dedicated bearers at the originating EPC due to SIP emergency session establishment within an emergency registration.
* PSAP is located in the PSTN connected via BGCF. The PSAP URI is delivered by the LRF
* @see ETSI TS 103 795-2 Clause 5.3.1.9 UE calling PSAP in PSTN via BGCF, LRF derived PSAP URI
*/
testcase TD_VoLTE_ECO_INT_INI_08() runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A_emergency );
var IotEquipmentUser v_psap := f_cf_create_IotEquipmentUser ( c_psap );
var ImsUserInfo v_userInfoA := f_getImUser ( PX_EUT_A_EMERGENCY );
var ImsUserInfo v_infoPsap := f_getImUser ( PX_PSAP );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_SIP_GMA_INTERFACENAME,
PX_DIAMETER_GX_INTERFACENAME,
PX_DIAMETER_RX_INTERFACENAME,
PX_SIP_MW_PE_INTERFACENAME,
PX_SIP_MW_EB_INTERFACENAME, // E-CSCF -> BGCF
PX_SIP_ML_LRF_INTERFACENAME // E-CSCF -> LRF: mlE_LRF
}))
{
var SipMessage v_sip;
f_cf_createVxLteMonitor();
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_user_up ( v_psap );
f_cf_VxLteMonitor_Up();
// Preamble
if (PX_PSAP_REGISTERED) {
f_mtc_userRegistration(v_psap, v_infoPsap);
} else {
// TODO Check OPTIONS from PSAP to E-CSCF
}
f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_08();
// Test body
//f_mtc_userInitiateCall (v_ueA, v_userTelInfoB);
f_mtc_check_TP_GM_PCSCF_INVITE_02(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 1
f_mtc_check_TP_GM_PCSCF_ECO_100Trying_01(vc_vxlte_monitor_components.gmA, -, v_sip);
//Rx/Gx exchange after INVITE (SDP) was received at P-CSCF
f_mtc_check_TP_RX_PCSCF_AAR_03(vc_vxlte_monitor_components.rx);// Event 2
f_mtc_check_TP_GX_PCRF_RAR_01(vc_vxlte_monitor_components.gx, true); // Event 3
f_mtc_check_TP_GX_PGW_RAA_02(vc_vxlte_monitor_components.gx); // Event 4
f_mtc_check_TP_RX_PCRF_AAA_02(vc_vxlte_monitor_components.rx); // Event 5
f_mtc_check_TP_RX_PCSCF_RAA_01(vc_vxlte_monitor_components.rx);// Events 7,8
//f_mtc_check_TP_GX_PCRF_CCA_01(vc_vxlte_monitor_components.gx); // Events 6,9
f_mtc_check_TP_MW_PCSCF_ECO_INVITE_02(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 10
f_mtc_check_TP_MW_PCSCF_ECO_100Trying_01(vc_vxlte_monitor_components.mwPE, -, v_sip);
// FIXME f_mtc_check_TP_MW_IBCF_xxx <--> f_mtc_check_TP_ML_EBCF_xxx
f_mtc_check_TP_MW_IBCF_INVITE_01(vc_vxlte_monitor_components.mlE_LRF); // Event 11
f_mtc_check_TP_MX_LRF_3xxAny_01(vc_vxlte_monitor_components.mlE_LRF, -, v_sip); // Event 12
f_mtc_check_TP_MW_IBCF_INVITE_01(vc_vxlte_monitor_components.mwEB); // Event 13
f_mtc_check_TP_MW_IBSCF_100Trying_01(vc_vxlte_monitor_components.mwEB, -, v_sip);
f_mtc_check_TP_IC_IBCF_INVITE_01(vc_vxlte_monitor_components.ic, true); // INVITE Event 14
f_mtc_check_TP_IC_IBCF_INVITE_02(vc_vxlte_monitor_components.ic, true); // INVITE Event 14
f_mtc_check_TP_IC_IBCF_183RESP_01(vc_vxlte_monitor_components.ic,-); // 183 Event 15
// 183 Session Progress
f_mtc_check_TP_MW_IBCF_183SESSION_PROGRESS_01(vc_vxlte_monitor_components.mwEB, -, v_sip); // Event 16
f_mtc_check_TP_MW_PCSCF_ECO_183SESSION_PROGRESS_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 17
f_mtc_check_TP_GM_PCSCF_183SESSION_PROGRESS_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 24
//Rx/Gx exchange after 183(SDP) was received at P-CSCF
f_mtc_check_TP_RX_PCSCF_AAR_04(vc_vxlte_monitor_components.rx);// Event 18
f_mtc_check_TP_GX_PCRF_RAR_01(vc_vxlte_monitor_components.gx, true); // Event 19
f_mtc_check_TP_GX_PGW_RAA_02(vc_vxlte_monitor_components.gx); // Event 20
f_mtc_check_TP_RX_PCRF_AAA_02(vc_vxlte_monitor_components.rx); // Event 21
f_mtc_check_TP_IC_IBCF_180RESP_01(vc_vxlte_monitor_components.ic, true); // 180 Ringing – Event 24
f_mtc_check_TP_MW_IBCF_180RINGING_01(vc_vxlte_monitor_components.mwEB, -, v_sip); // Event 25
f_mtc_check_TP_MW_PCSCF_ECO_180RINGING_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 26
f_mtc_check_TP_GM_PCSCF_180RINGING_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 27
f_mtc_userCheckRinging(v_psap);
f_mtc_userCheckPeerIsRinging(v_ueA);
f_mtc_userAnswerCall(v_psap);
f_mtc_check_TP_IC_IBCF_2XXRESP_01(vc_vxlte_monitor_components.ic, true); // 200 OK – Event 28
f_mtc_check_TP_IC_IBCF_2XXRESP_02(vc_vxlte_monitor_components.ic, true); // 200 OK – Event 28
f_mtc_check_TP_IC_IBCF_2XXRESP_03(vc_vxlte_monitor_components.ic); // 200 OK – Event 28
f_mtc_check_TP_MW_IBCF_200OK_01(vc_vxlte_monitor_components.mwEB, -, v_sip); // Event 29
f_mtc_check_TP_MW_PCSCF_ECO_200OK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 30
f_mtc_check_TP_GM_PCSCF_200OK_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 31
f_mtc_check_TP_GM_PCSCF_ACK_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 32
f_mtc_check_TP_MW_PCSCF_ECO_ACK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 33
f_mtc_check_TP_MW_IBCF_ACK_01(vc_vxlte_monitor_components.mwEB, -, v_sip); // Event 34
f_mtc_check_TP_IC_IBCF_ACK_01(vc_vxlte_monitor_components.ic); // ACK – Event 35
f_mtc_userCheckCallEstablished(v_ueA); // Event 36
f_mtc_userCheckCallEstablished(v_psap); // Event 36
// Postamble
f_mtc_EndCall(v_ueA);
f_PO_user_home_deregistration(v_ueA);
f_PO_user_home_deregistration(v_psap);
//f_cf_int_call_down(v_config);
//unmap/disconnect component ports
f_cf_user_down ( v_psap );
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
}
f_cf_adapter_down ( );
} // End of TC TD_VoLTE_ECO_INT_INI_08
group f_TD_VoLTE_ECO_INT_INI_08 {
function f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_08() runs on ImsTestCoordinator {
log("If the test case fails, please check the preconditions");
// TODO Add real code to check pre-conditions
} // End of function f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_08
} // End of group f_TD_VoLTE_ECO_INT_INI_08
/**
* @desc
* @see ETSI TS 103 795-2 Clause 5.3.1.10 UE calling PSAP over AS with non-emergency registration
*/
testcase TD_VoLTE_ECO_INT_INI_09() runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A_emergency );
var IotEquipmentUser v_psap := f_cf_create_IotEquipmentUser ( c_psap );
var ImsUserInfo v_userInfoA := f_getImUser ( PX_EUT_A_EMERGENCY );
var ImsUserInfo v_infoPsap := f_getImUser ( PX_PSAP );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_SIP_GMA_INTERFACENAME,
PX_DIAMETER_GX_INTERFACENAME,
PX_DIAMETER_RX_INTERFACENAME,
PX_SIP_MW_PE_INTERFACENAME,
PX_SIP_MW_EB_INTERFACENAME, // E-CSCF -> IBCF
PX_SIP_MM_B_PSAP_INTERFACENAME
}))
{
var SipMessage v_sip;
f_cf_createVxLteMonitor();
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_user_up ( v_psap );
f_cf_VxLteMonitor_Up();
// Preamble
if (PX_PSAP_REGISTERED) {
f_mtc_userRegistration(v_psap, v_infoPsap);
} else {
// TODO Check OPTIONS from PSAP to E-CSCF
}
f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_09_01();
// Test body
//f_mtc_userInitiateCall (v_ueA, v_userTelInfoB);
// TODO
f_mtc_userCheckCallEstablished(v_ueA); // Event 34
f_mtc_userCheckCallEstablished(v_psap); // Event 34
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
1332
1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
1350
1351
1352
1353
1354
1355
1356
1357
1358
// Postamble
f_mtc_EndCall(v_ueA);
f_PO_user_home_deregistration(v_ueA);
f_PO_user_home_deregistration(v_psap);
//f_cf_int_call_down(v_config);
//unmap/disconnect component ports
f_cf_user_down ( v_psap );
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
}
f_cf_adapter_down ( );
} // End of TC TD_VoLTE_ECO_INT_INI_09
group f_TD_VoLTE_ECO_INT_INI_09 {
function f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_09_01() runs on ImsTestCoordinator {
log("If the test case fails, please check the preconditions");
// TODO Add real code to check pre-conditions
} // End of function f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_09
} // End of group f_TD_VoLTE_ECO_INT_INI_09
/**
* @desc To demonstrate that if an emergency call has been terminated, the attempt by the PSAP call taker to communicate back to the emergency caller shall be answered.
* @see ETSI TS 103 795-2 Clause 5.3.1.11 Callback from PSAP
* @remark Ipetion 1: PSAP in IMS A
*/
testcase TD_VoLTE_ECO_INT_INI_10_01() runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A_emergency );
var IotEquipmentUser v_psap := f_cf_create_IotEquipmentUser ( c_psap );
var ImsUserInfo v_userInfoA := f_getImUser ( PX_EUT_A_EMERGENCY );
var ImsUserInfo v_infoPsap := f_getImUser ( PX_PSAP );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_SIP_GMA_INTERFACENAME,
PX_SIP_MW_PE_INTERFACENAME,
}))
{
var SipMessage v_sip;
f_cf_createVxLteMonitor();
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_user_up ( v_psap );
f_cf_VxLteMonitor_Up();
// Preamble
f_mtc_userRegistration(v_ueA, v_userInfoA);
if (PX_PSAP_REGISTERED) {
f_mtc_userRegistration(v_psap, v_infoPsap);
} else {
// TODO Check OPTIONS from PSAP to E-CSCF
}
f_mtc_userInitiateCall (v_ueA, v_infoPsap); // Event 1
f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_10_01();
// Test body
//f_mtc_userInitiateCall (v_ueA, v_userTelInfoB);
f_mtc_check_TP_MM_ECSCF_ECO_INVITE_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // INVITE Event 1
f_mtc_check_TP_MM_ECSCF_ECO_100Trying_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip);
f_mtc_check_TP_MW_PCSCF_ECO_INVITE_02(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 6
f_mtc_check_TP_MW_PCSCF_ECO_100Trying_01(vc_vxlte_monitor_components.mwPE, -, v_sip);
f_mtc_check_TP_GM_PCSCF_ECO_INVITE_02(vc_vxlte_monitor_components.gmA, -, v_sip); // INVITE Event 7
f_mtc_check_TP_GM_PCSCF_ECO_100Trying_01(vc_vxlte_monitor_components.gmA, -, v_sip);
// 183 Session Progress
f_mtc_check_TP_GM_PCSCF_183SESSION_PROGRESS_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 8
f_mtc_check_TP_MW_PCSCF_ECO_183SESSION_PROGRESS_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 9
f_mtc_check_TP_MM_ECSCF_ECO_183SESSION_PROGRESS_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // 183 In Progress Event 10
f_mtc_check_TP_GM_PCSCF_180RINGING_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 16
f_mtc_check_TP_MW_PCSCF_ECO_180RINGING_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 17
f_mtc_check_TP_MM_ECSCF_ECO_180RINGING_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // 180 Ringing – Event 20
f_mtc_userCheckRinging(v_ueA); // Event 15
f_mtc_userCheckPeerIsRinging(v_psap); // Event 15
f_mtc_userAnswerCall(v_ueA); // Event 26
f_mtc_check_TP_GM_PCSCF_200OK_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 18
f_mtc_check_TP_MW_PCSCF_ECO_200OK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 10
f_mtc_check_TP_MM_ECSCF_ECO_200OK_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // 200 OK Event 21
f_mtc_check_TP_MM_ECSCF_ECO_ACK_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // ACK – Event 22
f_mtc_check_TP_MW_PCSCF_ECO_ACK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 35
f_mtc_check_TP_GM_PCSCF_ACK_01(vc_vxlte_monitor_components.gmA, -, v_sip); // ACK Event 36
f_mtc_userCheckCallEstablished(v_ueA); // Event 37
f_mtc_userCheckCallEstablished(v_psap); // Event 37
// Postamble
f_mtc_EndCall(v_ueA);
f_PO_user_home_deregistration(v_ueA);
f_PO_user_home_deregistration(v_psap);
//f_cf_int_call_down(v_config);
//unmap/disconnect component ports
f_cf_user_down ( v_psap );
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
}
f_cf_adapter_down ( );
} // End of TC TD_VoLTE_ECO_INT_INI_10_01
group f_TD_VoLTE_ECO_INT_INI_10_01 {
function f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_10_01() runs on ImsTestCoordinator {
log("If the test case fails, please check the preconditions");
// TODO Add real code to check pre-conditions
} // End of function f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_10_01
} // End of group f_TD_VoLTE_ECO_INT_INI_10_01
/**
* @desc To demonstrate that if an emergency call has been terminated, the attempt by the PSAP call taker to communicate back to the emergency caller shall be answered.
* @see ETSI TS 103 795-2 Clause 5.3.1.11 Callback from PSAP
* @remark Ipetion 1: PSAP NOT in IMS A
*/
testcase TD_VoLTE_ECO_INT_INI_10_02() runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A_emergency );
var IotEquipmentUser v_psap := f_cf_create_IotEquipmentUser ( c_psap );
var ImsUserInfo v_userInfoA := f_getImUser ( PX_EUT_A_EMERGENCY );
var ImsUserInfo v_infoPsap := f_getImUser ( PX_PSAP );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_SIP_GMA_INTERFACENAME,
PX_SIP_MW_PE_INTERFACENAME,
PX_SIP_IC_INTERFACENAME // IBCF -> IMS_B -> PSAP
}))
{
var SipMessage v_sip;
f_cf_createVxLteMonitor();
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_user_up ( v_psap );
f_cf_VxLteMonitor_Up();
// Preamble
if (PX_PSAP_REGISTERED) {
f_mtc_userRegistration(v_psap, v_infoPsap);
} else {
// TODO Check OPTIONS from PSAP to E-CSCF
}
f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_10_02();
// Test body
//f_mtc_userInitiateCall (v_ueA, v_userTelInfoB);
f_mtc_check_TP_IC_IBCF_INVITE_01(vc_vxlte_monitor_components.ic); // Event 21
f_mtc_check_TP_GM_PCSCF_ECO_100Trying_01(vc_vxlte_monitor_components.ic, -, v_sip);
f_mtc_check_TP_MW_IBCF_INVITE_01(vc_vxlte_monitor_components.mwEB); // Event 3
f_mtc_check_TP_MW_IBSCF_100Trying_01(vc_vxlte_monitor_components.mwEB, -, v_sip);
f_mtc_check_TP_MW_PCSCF_ECO_INVITE_02(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 6
f_mtc_check_TP_MW_PCSCF_ECO_100Trying_01(vc_vxlte_monitor_components.mwPE, -, v_sip);
f_mtc_check_TP_GM_PCSCF_INVITE_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 7
f_mtc_check_TP_GM_PCSCF_ECO_100Trying_01(vc_vxlte_monitor_components.gmA, -, v_sip);
// 183 Session Progress
f_mtc_check_TP_GM_PCSCF_183SESSION_PROGRESS_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 8
f_mtc_check_TP_MW_PCSCF_ECO_183SESSION_PROGRESS_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 9
f_mtc_check_TP_MM_ECSCF_ECO_183SESSION_PROGRESS_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // 183 In Progress Event 10
f_mtc_check_TP_GM_PCSCF_180RINGING_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 16
f_mtc_check_TP_MW_PCSCF_ECO_180RINGING_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 17
f_mtc_check_TP_MM_ECSCF_ECO_180RINGING_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // 180 Ringing – Event 20
f_mtc_userCheckRinging(v_ueA); // Event 15
f_mtc_userCheckPeerIsRinging(v_psap); // Event 15
f_mtc_userAnswerCall(v_ueA); // Event 26
f_mtc_check_TP_GM_PCSCF_200OK_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 18
f_mtc_check_TP_MW_PCSCF_ECO_200OK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 10
f_mtc_check_TP_MM_ECSCF_ECO_200OK_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // 200 OK Event 21
f_mtc_check_TP_MM_ECSCF_ECO_ACK_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // ACK – Event 22
f_mtc_check_TP_MW_PCSCF_ECO_ACK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 35
f_mtc_check_TP_GM_PCSCF_ACK_01(vc_vxlte_monitor_components.gmA, -, v_sip); // ACK Event 36
f_mtc_userCheckCallEstablished(v_ueA); // Event 37
f_mtc_userCheckCallEstablished(v_psap); // Event 37
// Postamble
f_mtc_EndCall(v_ueA);
f_PO_user_home_deregistration(v_ueA);
f_PO_user_home_deregistration(v_psap);
//f_cf_int_call_down(v_config);
//unmap/disconnect component ports
f_cf_user_down ( v_psap );
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
}
f_cf_adapter_down ( );
} // End of TC TD_VoLTE_ECO_INT_INI_10_02
group f_TD_VoLTE_ECO_INT_INI_10_02 {
function f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_10_02() runs on ImsTestCoordinator {
log("If the test case fails, please check the preconditions");
// TODO Add real code to check pre-conditions
} // End of function f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_10_02
} // End of group f_TD_VoLTE_ECO_INT_INI_10_02
/**
* @desc To demonstrate that if an emergency call has been terminated, the attempt by the PSAP call taker to communicate back to the emergency caller shall be answered.
* @see ETSI TS 103 795-2 Clause 5.3.1.11 Callback from PSAP
* @remark Ipetion 1: PSAP in PSTN A
*/
testcase TD_VoLTE_ECO_INT_INI_10_03() runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A_emergency );
var IotEquipmentUser v_psap := f_cf_create_IotEquipmentUser ( c_psap );
var ImsUserInfo v_userInfoA := f_getImUser ( PX_EUT_A_EMERGENCY );
var ImsUserInfo v_infoPsap := f_getImUser ( PX_PSAP );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_SIP_GMA_INTERFACENAME,
PX_DIAMETER_GX_INTERFACENAME,
PX_DIAMETER_RX_INTERFACENAME,
PX_SIP_MW_PE_INTERFACENAME,
}))
{
var SipMessage v_sip;
f_cf_createVxLteMonitor();
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_user_up ( v_psap );
f_cf_VxLteMonitor_Up();
// Preamble
if (PX_PSAP_REGISTERED) {
f_mtc_userRegistration(v_psap, v_infoPsap);
} else {
// TODO Check OPTIONS from PSAP to E-CSCF
}
f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_10_03();
// Test body
//f_mtc_userInitiateCall (v_ueA, v_userTelInfoB);
// TODO
f_mtc_userCheckCallEstablished(v_ueA); // Event 34
f_mtc_userCheckCallEstablished(v_psap); // Event 34
// Postamble
f_mtc_EndCall(v_ueA);
f_PO_user_home_deregistration(v_ueA);
f_PO_user_home_deregistration(v_psap);
//f_cf_int_call_down(v_config);
//unmap/disconnect component ports
f_cf_user_down ( v_psap );
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
}
f_cf_adapter_down ( );
} // End of TC TD_VoLTE_ECO_INT_INI_10_03
group f_TD_VoLTE_ECO_INT_INI_10_03 {
function f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_10_03() runs on ImsTestCoordinator {
log("If the test case fails, please check the preconditions");
// TODO Add real code to check pre-conditions
} // End of function f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_10_03
} // End of group f_TD_VoLTE_ECO_INT_INI_10_03
} // End of group EmergencySessionEstablishment
group EmergencySessionRelease {
/**
* @desc To perform originating UE session release and the tear down of related dedicated bearers.
* @see ETSI TS 103 795-2 Clause 5.3.3.1 UE Initiated Emergency Session Release
* @remark This is option 1: PSAP is in IMS A network
*/
testcase TD_VoLTE_ECO_INT_REL_01_01() runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A_emergency );
var IotEquipmentUser v_psap := f_cf_create_IotEquipmentUser ( c_psap );
var ImsUserInfo v_userInfoA := f_getImUser ( PX_EUT_A_EMERGENCY );
var ImsUserInfo v_infoPsap := f_getImUser ( PX_PSAP );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_SIP_GMA_INTERFACENAME,
PX_DIAMETER_GX_INTERFACENAME,
PX_DIAMETER_RX_INTERFACENAME,
PX_SIP_MW_PE_INTERFACENAME,
}))
{
var SipMessage v_sip;
f_cf_createVxLteMonitor();
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_user_up ( v_psap );
f_cf_VxLteMonitor_Up();
// Preamble
if (PX_PSAP_REGISTERED) {
f_mtc_userRegistration(v_psap, v_infoPsap);
} else {
// TODO Check OPTIONS from PSAP to E-CSCF
}
f_mtc_check_precond_TD_VoLTE_ECO_INT_REL_01_01();
// Test body
//f_mtc_userInitiateCall (v_ueA, v_userTelInfoB);
f_mtc_check_TP_GM_PCSCF_ECO_BYE_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 2
f_mtc_check_TP_MW_PCSCF_ECO_BYE_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 3
f_mtc_check_TP_MM_ECSCF_ECO_BYE_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // Event 4
//Rx/Gx exchange after BYE was received at P-CSCF
f_mtc_check_TP_RX_PCSCF_STR_01(vc_vxlte_monitor_components.rx); // (STR – Event 10
f_mtc_check_TP_GX_PCRF_RAR_02(vc_vxlte_monitor_components.gx, true); // (RAR – Event 11)
f_mtc_check_TP_GX_PGW_RAA_03(vc_vxlte_monitor_components.gx); // (RAA – Event 12)
f_mtc_check_TP_RX_PCRF_STA_01(vc_vxlte_monitor_components.rx); // (STA – Event 13)
f_mtc_check_TP_MW_IBCF_ECO_200OK_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // Event 13
f_mtc_check_TP_MW_PCSCF_ECO_200OK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 18
f_mtc_check_TP_GM_PCSCF_200OK_02(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 19
f_mtc_userCheckCallTerminated(v_ueA); // Event 20
f_mtc_userCheckCallCancelled(v_psap); // Event 21
// Postamble
f_PO_user_home_deregistration(v_ueA);
f_PO_user_home_deregistration(v_psap);
//unmap/disconnect component ports
f_cf_user_down ( v_psap );
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
f_cf_adapter_down ( );
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
}
f_cf_adapter_down ( );
} // End of TC TD_VoLTE_ECO_INT_REL_01_01
group f_TD_VoLTE_ECO_INT_REL_01_01 {
function f_mtc_check_precond_TD_VoLTE_ECO_INT_REL_01_01() runs on ImsTestCoordinator {
log("If the test case fails, please check the preconditions");
// TODO Add real code to check pre-conditions
} // End of function f_mtc_check_precond_TD_VoLTE_ECO_INT_REL_01_01
} // End of group f_TD_VoLTE_ECO_INT_REL_01_01
/**
* @desc To perform originating UE session release and the tear down of related dedicated bearers.
* @see ETSI TS 103 795-2 Clause 5.3.3.1 UE Initiated Emergency Session Release
* @remark This is option 2: PSAP is not in IMS A network
*/
testcase TD_VoLTE_ECO_INT_REL_01_02 ( ) runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A_emergency );
var IotEquipmentUser v_psap := f_cf_create_IotEquipmentUser ( c_psap );
var ImsUserInfo v_userInfoA := f_getImUser ( PX_EUT_A_EMERGENCY );
var ImsUserInfo v_infoPsap := f_getImUser ( PX_PSAP );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_SIP_GMA_INTERFACENAME,
PX_DIAMETER_GX_INTERFACENAME,
PX_DIAMETER_RX_INTERFACENAME,
PX_SIP_MW_PE_INTERFACENAME,
PX_SIP_IC_INTERFACENAME // IBCF -> IMS_B -> PSAP
}))
{
var SipMessage v_sip;
f_cf_createVxLteMonitor();
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_user_up ( v_psap );
f_cf_VxLteMonitor_Up();
// Preamble
if (PX_PSAP_REGISTERED) {
f_mtc_userRegistration(v_psap, v_infoPsap);
} else {
// TODO Check OPTIONS from PSAP to E-CSCF
}
f_mtc_check_precond_TD_VoLTE_ECO_INT_REL_01_02();
// Test body
//f_mtc_userInitiateCall (v_ueA, v_userTelInfoB);
f_mtc_check_TP_GM_PCSCF_ECO_BYE_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 2
f_mtc_check_TP_MW_PCSCF_ECO_BYE_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 3
f_mtc_check_TP_MW_IBCF_ECO_BYE_01(vc_vxlte_monitor_components.mwEB, -, v_sip); // Event 5
f_mtc_check_TP_IC_IBCF_ECO_BYE_01(vc_vxlte_monitor_components.ic); // Event 6
//Rx/Gx exchange after BYE was received at P-CSCF
f_mtc_check_TP_RX_PCSCF_STR_01(vc_vxlte_monitor_components.rx); // (STR – Event 10
f_mtc_check_TP_GX_PCRF_RAR_02(vc_vxlte_monitor_components.gx, true); // (RAR – Event 11)
f_mtc_check_TP_GX_PGW_RAA_03(vc_vxlte_monitor_components.gx); // (RAA – Event 12)
f_mtc_check_TP_RX_PCRF_STA_01(vc_vxlte_monitor_components.rx); // (STA – Event 13)
f_mtc_check_TP_MW_IBCF_ECO_200OK_01(vc_vxlte_monitor_components.mwEB, -, v_sip); // Event 15
f_mtc_check_TP_MW_PCSCF_ECO_200OK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 18
f_mtc_check_TP_GM_PCSCF_ECO_200OK_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 19
f_mtc_userCheckCallTerminated(v_ueA); // Event 22
f_mtc_userCheckCallCancelled(v_psap); // Event 23
// Postamble
f_PO_user_home_deregistration(v_ueA);
f_PO_user_home_deregistration(v_psap);
//unmap/disconnect component ports
f_cf_user_down ( v_psap );
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
f_cf_adapter_down ( );
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
}
f_cf_adapter_down ( );
} // End of TC TD_VoLTE_ECO_INT_REL_01_02
group f_TD_VoLTE_ECO_INT_REL_01_02 {
function f_mtc_check_precond_TD_VoLTE_ECO_INT_REL_01_02() runs on ImsTestCoordinator {
log("If the test case fails, please check the preconditions");
} // End of function f_mtc_check_precond_TD_VoLTE_ECO_INT_REL_01_02
} // End of f_TD_VoLTE_ECO_INT_REL_01_02
/**
* @desc To perform originating UE session release and the tear down of related dedicated bearers.
* @see ETSI TS 103 795-2 Clause 5.3.3.1 UE Initiated Emergency Session Release
* @remark This is option 3: PSAP is in PSTN network
*/
testcase TD_VoLTE_ECO_INT_REL_01_03() runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A_emergency );
var IotEquipmentUser v_psap := f_cf_create_IotEquipmentUser ( c_psap );
var ImsUserInfo v_userInfoA := f_getImUser ( PX_EUT_A_EMERGENCY );
var ImsUserInfo v_infoPsap := f_getImUser ( PX_PSAP );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_SIP_GMA_INTERFACENAME,
PX_DIAMETER_GX_INTERFACENAME,
PX_DIAMETER_RX_INTERFACENAME,
PX_SIP_MW_PE_INTERFACENAME, // E-CSCF -> IBCF
PX_SIP_IC_INTERFACENAME // IBCF -> IMS -> PSAP
}))
{
var SipMessage v_sip;
f_cf_createVxLteMonitor();
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_user_up ( v_psap );
f_cf_VxLteMonitor_Up();
// Preamble
if (PX_PSAP_REGISTERED) {
f_mtc_userRegistration(v_psap, v_infoPsap);
} else {
// TODO Check OPTIONS from PSAP to E-CSCF
}
f_mtc_userInitiateCall (v_ueA, v_infoPsap); // Event 1
f_mtc_check_precond_TD_VoLTE_ECO_INT_REL_01_03();
// Test body
//f_mtc_userInitiateCall (v_ueA, v_userTelInfoB);
f_mtc_check_TP_GM_PCSCF_ECO_BYE_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 2
f_mtc_check_TP_MW_PCSCF_ECO_BYE_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 3
f_mtc_check_TP_MI_BGCF_ECO_BYE_01(vc_vxlte_monitor_components.mwEB, -, v_sip); // Event 7
//Rx/Gx exchange after BYE was received at P-CSCF
f_mtc_check_TP_RX_PCSCF_STR_01(vc_vxlte_monitor_components.rx); // (STR – Event 10
f_mtc_check_TP_GX_PCRF_RAR_02(vc_vxlte_monitor_components.gx, true); // (RAR – Event 11)
f_mtc_check_TP_GX_PGW_RAA_03(vc_vxlte_monitor_components.gx); // (RAA – Event 12)
f_mtc_check_TP_RX_PCRF_STA_01(vc_vxlte_monitor_components.rx); // (STA – Event 13)
f_mtc_check_TP_MI_BGCF_ECO_200OK_01(vc_vxlte_monitor_components.mwEB, -, v_sip); // Event 17
f_mtc_check_TP_MW_PCSCF_ECO_200OK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 20
f_mtc_check_TP_GM_PCSCF_200OK_02(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 21
f_mtc_userCheckCallTerminated(v_ueA); // Event 22
f_mtc_userCheckCallCancelled(v_psap); // Event 23
// Postamble
f_PO_user_home_deregistration(v_ueA);
f_PO_user_home_deregistration(v_psap);
//unmap/disconnect component ports
f_cf_user_down ( v_psap );
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
f_cf_adapter_down ( );
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
}
f_cf_adapter_down ( );
} // End of TC TD_VoLTE_ECO_INT_REL_01_03
group f_TD_VoLTE_ECO_INT_REL_01_03 {
function f_mtc_check_precond_TD_VoLTE_ECO_INT_REL_01_03() runs on ImsTestCoordinator {
log("If the test case fails, please check the preconditions");
// TODO Add real code to check pre-conditions
} // End of function f_mtc_check_precond_TD_VoLTE_ECO_INT_REL_01_03
} // End of group f_TD_VoLTE_ECO_INT_REL_01_03
/**
* @desc To perform originating PSAP session release and the tear down of related dedicated bearers.
* @see ETSI TS 103 795-2 Clause 5.3.3.2 PSAP Initiated Emergency Session Release
* @remark This is option 1: PSAP is in IMS A network
*/
testcase TD_VoLTE_ECO_INT_REL_02_01() runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A_emergency );
var IotEquipmentUser v_psap := f_cf_create_IotEquipmentUser ( c_psap );
var ImsUserInfo v_userInfoA := f_getImUser ( PX_EUT_A_EMERGENCY );
var ImsUserInfo v_infoPsap := f_getImUser ( PX_PSAP );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_SIP_GMA_INTERFACENAME,
PX_DIAMETER_GX_INTERFACENAME,
PX_DIAMETER_RX_INTERFACENAME,
PX_SIP_MW_PE_INTERFACENAME,
PX_SIP_MW_EB_INTERFACENAME, // E-CSCF -> IBCF
PX_SIP_MM_B_PSAP_INTERFACENAME // E-CSCCF -> PSAP
}))
{
var SipMessage v_sip;
f_cf_createVxLteMonitor();
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_user_up ( v_psap );
f_cf_VxLteMonitor_Up();
// Preamble
if (PX_PSAP_REGISTERED) {
f_mtc_userRegistration(v_psap, v_infoPsap);
} else {
// TODO Check OPTIONS from PSAP to E-CSCF
}
f_mtc_check_precond_TD_VoLTE_ECO_INT_REL_02_01();
// Test body
//f_mtc_userInitiateCall (v_ueA, v_userTelInfoB);
// TODO
f_mtc_userCheckCallTerminated(v_ueA); // Event 21
f_mtc_userCheckCallCancelled(v_psap); // Event 20
// Postamble
f_PO_user_home_deregistration(v_ueA);
f_PO_user_home_deregistration(v_psap);
//unmap/disconnect component ports
f_cf_user_down ( v_psap );
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
f_cf_adapter_down ( );
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
}
f_cf_adapter_down ( );
} // End of TC TD_VoLTE_ECO_INT_REL_02_01
group f_TD_VoLTE_ECO_INT_REL_02_01 {
function f_mtc_check_precond_TD_VoLTE_ECO_INT_REL_02_01() runs on ImsTestCoordinator {
log("If the test case fails, please check the preconditions");
// TODO Add real code to check pre-conditions
} // End of function f_mtc_check_precond_TD_VoLTE_ECO_INT_REL_02_01
} // End of group f_TD_VoLTE_ECO_INT_REL_02_01
/**
* @desc To perform originating PSAP session release and the tear down of related dedicated bearers.
* @see ETSI TS 103 795-2 Clause 5.3.3.2 PSAP Initiated Emergency Session Release
* @remark This is option2: PSAP is not in IMS A network
*/
testcase TD_VoLTE_ECO_INT_REL_02_02() runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A_emergency );
var IotEquipmentUser v_psap := f_cf_create_IotEquipmentUser ( c_psap );
var ImsUserInfo v_userInfoA := f_getImUser ( PX_EUT_A_EMERGENCY );
var ImsUserInfo v_infoPsap := f_getImUser ( PX_PSAP );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_SIP_GMA_INTERFACENAME,
PX_DIAMETER_GX_INTERFACENAME,
PX_DIAMETER_RX_INTERFACENAME,
PX_SIP_MW_PE_INTERFACENAME,
PX_SIP_IC_INTERFACENAME // IBCF -> IMS
}))
{
var SipMessage v_sip;
f_cf_createVxLteMonitor();
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_user_up ( v_psap );
f_cf_VxLteMonitor_Up();
// Preamble
if (PX_PSAP_REGISTERED) {
f_mtc_userRegistration(v_psap, v_infoPsap);
} else {
// TODO Check OPTIONS from PSAP to E-CSCF
}
f_mtc_check_precond_TD_VoLTE_ECO_INT_REL_02_02();
// Test body
//f_mtc_userInitiateCall (v_ueA, v_userTelInfoB);
// TODO
f_mtc_userCheckCallTerminated(v_ueA); // Event 21
f_mtc_userCheckCallCancelled(v_psap); // Event 20
// Postamble
f_PO_user_home_deregistration(v_ueA);
f_PO_user_home_deregistration(v_psap);
//unmap/disconnect component ports
f_cf_user_down ( v_psap );
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
f_cf_adapter_down ( );
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
}
f_cf_adapter_down ( );
} // End of TC TD_VoLTE_ECO_INT_REL_02_02
group f_TD_VoLTE_ECO_INT_REL_02_02 {
function f_mtc_check_precond_TD_VoLTE_ECO_INT_REL_02_02() runs on ImsTestCoordinator {
log("If the test case fails, please check the preconditions");
// TODO Add real code to check pre-conditions
} // End of function f_mtc_check_precond_TD_VoLTE_ECO_INT_REL_02_02
} // End of group f_TD_VoLTE_ECO_INT_REL_02_02
/**
* @desc To perform originating PSAP session release and the tear down of related dedicated bearers.
* On call release initiated bye PSAP, the P-CSCF A should trigger the removal of all relevant previously created bearers
* @see ETSI TS 103 795-2 Clause 5.3.3.2 PSAP Initiated Emergency Session Release
* @remark This is option2: PSAP is in the same network
*/
testcase TD_VoLTE_ECO_INT_REL_02_03() runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A_emergency );
var IotEquipmentUser v_psap := f_cf_create_IotEquipmentUser ( c_psap );
var ImsUserInfo v_userInfoA := f_getImUser ( PX_EUT_A_EMERGENCY );
var ImsUserInfo v_infoPsap := f_getImUser ( PX_PSAP );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_SIP_GMA_INTERFACENAME,
PX_DIAMETER_GX_INTERFACENAME,
PX_DIAMETER_RX_INTERFACENAME,
PX_SIP_MW_PE_INTERFACENAME,
}))
{
var SipMessage v_sip;
f_cf_createVxLteMonitor();
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_user_up ( v_psap );
f_cf_VxLteMonitor_Up();
// Preamble
if (PX_PSAP_REGISTERED) {
f_mtc_userRegistration(v_psap, v_infoPsap);
} else {
// TODO Check OPTIONS from PSAP to E-CSCF
}
f_mtc_check_precond_TD_VoLTE_ECO_INT_REL_02_03();
// Test body
//f_mtc_userInitiateCall (v_ueA, v_userTelInfoB);
// TODO
f_mtc_userCheckCallTerminated(v_ueA); // Event 21
f_mtc_userCheckCallCancelled(v_psap); // Event 20
// Postamble
f_PO_user_home_deregistration(v_ueA);
f_PO_user_home_deregistration(v_psap);
//unmap/disconnect component ports
f_cf_user_down ( v_psap );
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
f_cf_adapter_down ( );
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
}
f_cf_adapter_down ( );
} // End of TC TD_VoLTE_ECO_INT_REL_02_03
group f_TD_VoLTE_ECO_INT_REL_02_03 {
function f_mtc_check_precond_TD_VoLTE_ECO_INT_REL_02_03() runs on ImsTestCoordinator {
log("If the test case fails, please check the preconditions");
// TODO Add real code to check pre-conditions
} // End of function f_mtc_check_precond_TD_VoLTE_ECO_INT_REL_02_03
} // End of group f_TD_VoLTE_ECO_INT_REL_02_03
} // End of group EmergencySessionRelease
group EmergencySessionAbortOrReject {
/**
* @desc To perform SIP session abort (originating side) and the related interactions with PCRF A and EPC A.
* @see ETSI TS 103 795-2 Clause 5.3.4.1 Emergency Session Abort
* @remark This is option 1: PSAP is in IMS A network
*/
testcase TD_VoLTE_ECO_INT_ABT_01_01() runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A_emergency );
var IotEquipmentUser v_psap := f_cf_create_IotEquipmentUser ( c_psap );
var ImsUserInfo v_userInfoA := f_getImUser ( PX_EUT_A_EMERGENCY );
var ImsUserInfo v_infoPsap := f_getImUser ( PX_PSAP );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_SIP_GMA_INTERFACENAME,
PX_DIAMETER_GX_INTERFACENAME,
PX_DIAMETER_RX_INTERFACENAME,
PX_SIP_MW_PE_INTERFACENAME,
PX_SIP_MW_EB_INTERFACENAME, // E-CSCF -> IBCF
PX_SIP_MM_B_PSAP_INTERFACENAME // E-CSCCF -> PSAP
}))
{
var SipMessage v_sip;
f_cf_createVxLteMonitor();
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_user_up ( v_psap );
f_cf_VxLteMonitor_Up();
// Preamble
if (PX_PSAP_REGISTERED) {
f_mtc_userRegistration(v_psap, v_infoPsap);
} else {
// TODO Check OPTIONS from PSAP to E-CSCF
}
f_mtc_check_precond_TD_VoLTE_ECO_INT_ABT_01_01();
// Test body
//f_mtc_userInitiateCall (v_ueA, v_userTelInfoB);
f_mtc_check_TP_GM_PCSCF_ECO_CANCEL_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 1
//Rx/Gx exchange after CANCEL was received at P-CSCF
f_mtc_check_TP_RX_PCSCF_STR_01(vc_vxlte_monitor_components.rx); // (STR – Event 2
f_mtc_check_TP_GX_PCRF_RAR_02(vc_vxlte_monitor_components.gx, true); // (RAR – Event 3)
f_mtc_check_TP_GX_PGW_RAA_03(vc_vxlte_monitor_components.gx); // (RAA – Event 4)
f_mtc_check_TP_RX_PCRF_STA_01(vc_vxlte_monitor_components.rx); // (STA – Event 5)
f_mtc_check_TP_MW_PCSCF_ECO_CANCEL_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 6
f_mtc_check_TP_MM_ECSCF_ECO_CANCEL_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // Event 7
f_mtc_check_TP_MW_PCSCF_ECO_200OK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 17
f_mtc_check_TP_GM_PCSCF_200OK_02(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 18
f_mtc_check_TP_MW_PCSCF_ECO_487INVITE_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 24
f_mtc_check_TP_GM_PCSCF_487INVITE_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 25
f_mtc_check_TP_GM_PCSCF_ECO_ACK_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 26
f_mtc_check_TP_MW_PCSCF_ECO_ACK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 27
f_mtc_check_TP_MM_ECSCF_ECO_ACK_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // Event 28
f_mtc_userCheckCallTerminated(v_ueA); // Event 33
f_mtc_userCheckCallCancelled(v_psap); // Event 34
// Postamble
f_PO_user_home_deregistration(v_ueA);
f_PO_user_home_deregistration(v_psap);
//unmap/disconnect component ports
f_cf_user_down ( v_psap );
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
f_cf_adapter_down ( );
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
}
f_cf_adapter_down ( );
} // End of TC TD_VoLTE_ECO_INT_ABT_01_01
group f_TD_VoLTE_ECO_INT_ABT_01_01 {
function f_mtc_check_precond_TD_VoLTE_ECO_INT_ABT_01_01() runs on ImsTestCoordinator {
log("If the test case fails, please check the preconditions");
// TODO Add real code to check pre-conditions
} // End of function f_mtc_check_precond_TD_VoLTE_ECO_INT_ABT_01_01
} // End of group f_TD_VoLTE_ECO_INT_ABT_01_01
/**
* @desc To perform SIP session abort (originating side) and the related interactions with PCRF A and EPC A.
* @see ETSI TS 103 795-2 Clause 5.3.4.1 Emergency Session Abort
* @remark This is option 1: PSAP is not in IMS A network
*/
testcase TD_VoLTE_ECO_INT_ABT_01_02() runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A_emergency );
var IotEquipmentUser v_psap := f_cf_create_IotEquipmentUser ( c_psap );
var ImsUserInfo v_userInfoA := f_getImUser ( PX_EUT_A_EMERGENCY );
var ImsUserInfo v_infoPsap := f_getImUser ( PX_PSAP );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_SIP_GMA_INTERFACENAME,
PX_DIAMETER_GX_INTERFACENAME,
PX_DIAMETER_RX_INTERFACENAME,
PX_SIP_MW_PE_INTERFACENAME,
PX_SIP_IC_INTERFACENAME // IBCF -> IMS -> PSAP
}))
{
var SipMessage v_sip;
f_cf_createVxLteMonitor();
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_user_up ( v_psap );
f_cf_VxLteMonitor_Up();
// Preamble
if (PX_PSAP_REGISTERED) {
f_mtc_userRegistration(v_psap, v_infoPsap);
} else {
// TODO Check OPTIONS from PSAP to E-CSCF
}
f_mtc_check_precond_TD_VoLTE_ECO_INT_ABT_01_02();
// Test body
//f_mtc_userInitiateCall (v_ueA, v_userTelInfoB);
2253
2254
2255
2256
2257
2258
2259
2260
2261
2262
2263
2264
2265
2266
2267
2268
2269
2270
2271
2272
2273
2274
2275
2276
2277
2278
f_mtc_check_TP_GM_PCSCF_ECO_CANCEL_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 1
//Rx/Gx exchange after CANCEL was received at P-CSCF
f_mtc_check_TP_RX_PCSCF_STR_01(vc_vxlte_monitor_components.rx); // (STR – Event 2
f_mtc_check_TP_GX_PCRF_RAR_02(vc_vxlte_monitor_components.gx, true); // (RAR – Event 3)
f_mtc_check_TP_GX_PGW_RAA_03(vc_vxlte_monitor_components.gx); // (RAA – Event 4)
f_mtc_check_TP_RX_PCRF_STA_01(vc_vxlte_monitor_components.rx); // (STA – Event 5)
f_mtc_check_TP_MW_PCSCF_ECO_CANCEL_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 6
f_mtc_check_TP_MW_IBCF_ECO_CANCEL_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // Event 9
f_mtc_check_TP_IC_IBCF_CANCEL_01(vc_vxlte_monitor_components.ic, true); // CANCEL Event 10 (NOTE: comment out if ISC simulated by Ic)
f_mtc_check_TP_IC_IBCF_2XXRESP_01(vc_vxlte_monitor_components.ic); // 200 CANCEL – Event 11
f_mtc_check_TP_MW_IBCF_ECO_200OK_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // Event 12
f_mtc_check_TP_MW_PCSCF_ECO_200OK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 17
f_mtc_check_TP_GM_PCSCF_200OK_02(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 18
f_mtc_check_TP_IC_IBCF_487INVITE_01(vc_vxlte_monitor_components.ic); // Event 20
f_mtc_check_TP_MW_IBCF_ECO_487INVITE_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // Event 21
f_mtc_check_TP_MW_PCSCF_ECO_487INVITE_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 24
f_mtc_check_TP_GM_PCSCF_487INVITE_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 25
f_mtc_check_TP_GM_PCSCF_ECO_ACK_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 26
f_mtc_check_TP_MW_PCSCF_ECO_ACK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 27
f_mtc_check_TP_MW_IBCF_ECO_ACK_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // Event 29
f_mtc_check_TP_IC_IBCF_ACK_01(vc_vxlte_monitor_components.ic, true); // Event 30
f_mtc_userCheckCallTerminated(v_ueA); // Event 33
f_mtc_userCheckCallCancelled(v_psap); // Event 34
// Postamble
f_PO_user_home_deregistration(v_ueA);
f_PO_user_home_deregistration(v_psap);
//unmap/disconnect component ports
f_cf_user_down ( v_psap );
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
f_cf_adapter_down ( );
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
}
f_cf_adapter_down ( );
} // End of TC TD_VoLTE_ECO_INT_ABT_01_02
group f_TD_VoLTE_ECO_INT_ABT_01_02 {
function f_mtc_check_precond_TD_VoLTE_ECO_INT_ABT_01_02() runs on ImsTestCoordinator {
log("If the test case fails, please check the preconditions");
// TODO Add real code to check pre-conditions
} // End of function f_mtc_check_precond_TD_VoLTE_ECO_INT_ABT_01_02
} // End of group f_TD_VoLTE_ECO_INT_ABT_01_02
/**
* @desc To perform SIP session abort (originating side) and the related interactions with PCRF A and EPC A.
* @see ETSI TS 103 795-2 Clause 5.3.4.1 Emergency Session Abort
* @remark This is option 1: PSAP is in PSTN network
testcase TD_VoLTE_ECO_INT_ABT_01_03() runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A_emergency );
var IotEquipmentUser v_psap := f_cf_create_IotEquipmentUser ( c_psap );
var ImsUserInfo v_userInfoA := f_getImUser ( PX_EUT_A_EMERGENCY );
var ImsUserInfo v_infoPsap := f_getImUser ( PX_PSAP );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_SIP_GMA_INTERFACENAME,
PX_DIAMETER_GX_INTERFACENAME,
PX_DIAMETER_RX_INTERFACENAME,
PX_SIP_MW_PE_INTERFACENAME,
PX_SIP_IC_INTERFACENAME // IBCF -> IMS -> PSAP
}))
{
var SipMessage v_sip;
f_cf_createVxLteMonitor();
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_user_up ( v_psap );
f_cf_VxLteMonitor_Up();
if (PX_PSAP_REGISTERED) {
f_mtc_userRegistration(v_psap, v_infoPsap);
} else {
// TODO Check OPTIONS from PSAP to E-CSCF
}
f_mtc_check_precond_TD_VoLTE_ECO_INT_ABT_01_03();
// Test body
//f_mtc_userInitiateCall (v_ueA, v_userTelInfoB);
2353
2354
2355
2356
2357
2358
2359
2360
2361
2362
2363
2364
2365
2366
2367
2368
2369
2370
2371
2372
2373
2374
2375
2376
2377
f_mtc_check_TP_GM_PCSCF_ECO_CANCEL_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 1
//Rx/Gx exchange after CANCEL was received at P-CSCF
f_mtc_check_TP_RX_PCSCF_STR_01(vc_vxlte_monitor_components.rx); // (STR – Event 2
f_mtc_check_TP_GX_PCRF_RAR_02(vc_vxlte_monitor_components.gx, true); // (RAR – Event 3)
f_mtc_check_TP_GX_PGW_RAA_03(vc_vxlte_monitor_components.gx); // (RAA – Event 4)
f_mtc_check_TP_RX_PCRF_STA_01(vc_vxlte_monitor_components.rx); // (STA – Event 5)
f_mtc_check_TP_MW_PCSCF_ECO_CANCEL_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 6
f_mtc_check_TP_MI_BGCF_ECO_CANCEL_01(vc_vxlte_monitor_components.mwEB, -, v_sip); // Event 13
f_mtc_check_TP_MM_ECSCF_ECO_CANCEL_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // Event 14
f_mtc_check_TP_MI_BGCF_ECO_200OK_01(vc_vxlte_monitor_components.mwEB, -, v_sip); // Event 16
f_mtc_check_TP_MW_PCSCF_ECO_200OK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 17
f_mtc_check_TP_GM_PCSCF_200OK_02(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 18
f_mtc_check_TP_MM_ECSCF_ECO_487INVITE_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // Event 22
f_mtc_check_TP_MI_BGCF_ECO_487INVITE_01(vc_vxlte_monitor_components.mwEB, -, v_sip); // Event 23
f_mtc_check_TP_MW_PCSCF_ECO_487INVITE_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 24
f_mtc_check_TP_GM_PCSCF_487INVITE_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 25
f_mtc_check_TP_GM_PCSCF_ECO_ACK_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 26
f_mtc_check_TP_MW_PCSCF_ECO_ACK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 27
f_mtc_check_TP_MI_BGCF_ECO_ACK_01(vc_vxlte_monitor_components.mwEB, -, v_sip); // Event 31
f_mtc_check_TP_MM_ECSCF_ECO_ACK_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // Event 32
f_mtc_userCheckCallTerminated(v_ueA); // Event 33
f_mtc_userCheckCallCancelled(v_psap); // Event 34
// Postamble
f_PO_user_home_deregistration(v_ueA);
f_PO_user_home_deregistration(v_psap);
//unmap/disconnect component ports
f_cf_user_down ( v_psap );
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
f_cf_adapter_down ( );
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
}
f_cf_adapter_down ( );
} // End of TC TD_VoLTE_ECO_INT_ABT_01_03
group f_TD_VoLTE_ECO_INT_ABT_01_03 {
function f_mtc_check_precond_TD_VoLTE_ECO_INT_ABT_01_03() runs on ImsTestCoordinator {
log("If the test case fails, please check the preconditions");
// TODO Add real code to check pre-conditions
} // End of function f_mtc_check_precond_TD_VoLTE_ECO_INT_ABT_01_03
} // End of group f_TD_VoLTE_ECO_INT_ABT_01_03
/**
* @desc To demonstrate interaction between UE A and PSAP when an emergency session is rejected.
* @see ETSI TS 103 795-2 5.3.4.3 Emergency Session Reject
* @remark This is option 1: PSAP is in IMS A network
*/
testcase TD_VoLTE_ECO_INT_REJ_01_01() runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A_emergency );
var IotEquipmentUser v_psap := f_cf_create_IotEquipmentUser ( c_psap );
var ImsUserInfo v_userInfoA := f_getImUser ( PX_EUT_A_EMERGENCY );
var ImsUserInfo v_infoPsap := f_getImUser ( PX_PSAP );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_SIP_GMA_INTERFACENAME,
PX_DIAMETER_GX_INTERFACENAME,
PX_DIAMETER_RX_INTERFACENAME,
PX_SIP_MW_PE_INTERFACENAME,
PX_SIP_MW_EB_INTERFACENAME, // E-CSCF -> IBCF
PX_SIP_MM_B_PSAP_INTERFACENAME // E-CSCCF -> PSAP
}))
{
var SipMessage v_sip;
f_cf_createVxLteMonitor();
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_user_up ( v_psap );
f_cf_VxLteMonitor_Up();
// Preamble
if (PX_PSAP_REGISTERED) {
f_mtc_userRegistration(v_psap, v_infoPsap);
} else {
// TODO Check OPTIONS from PSAP to E-CSCF
}
f_mtc_check_precond_TD_VoLTE_ECO_INT_REJ_01_01();
// Test body
//f_mtc_userInitiateCall (v_ueA, v_userTelInfoB);
2452
2453
2454
2455
2456
2457
2458
2459
2460
2461
2462
2463
2464
2465
2466
2467
2468
2469
2470
2471
2472
2473
2474
2475
2476
2477
2478
2479
2480
2481
2482
2483
2484
f_mtc_check_TP_GM_PCSCF_ECO_INVITE_02(vc_vxlte_monitor_components.gmA, -, v_sip); // INVITE Event 3
f_mtc_check_TP_GM_PCSCF_ECO_100Trying_01(vc_vxlte_monitor_components.gmA, -, v_sip);
//Rx/Gx exchange after INVITE (SDP) was received at P-CSCF
f_mtc_check_TP_RX_PCSCF_AAR_03(vc_vxlte_monitor_components.rx);// Event 4
f_mtc_check_TP_GX_PCRF_RAR_01(vc_vxlte_monitor_components.gx, true); // Event 5
f_mtc_check_TP_GX_PGW_RAA_02(vc_vxlte_monitor_components.gx); // Event 6
f_mtc_check_TP_RX_PCRF_AAA_02(vc_vxlte_monitor_components.rx); // Event 7
f_mtc_check_TP_RX_PCSCF_RAA_01(vc_vxlte_monitor_components.rx);// Events 8,9
f_mtc_check_TP_GX_PCRF_CCA_01(vc_vxlte_monitor_components.gx); // Events 10,11
f_mtc_check_TP_MW_PCSCF_ECO_INVITE_02(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 12
f_mtc_check_TP_MW_PCSCF_ECO_100Trying_01(vc_vxlte_monitor_components.mwPE, -, v_sip);
f_mtc_check_TP_MW_PCSCF_ECO_INVITE_03(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 13
f_mtc_check_TP_MW_PCSCF_ECO_100Trying_01(vc_vxlte_monitor_components.mwPE, -, v_sip);
f_mtc_check_TP_MM_ECSCF_ECO_INVITE_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // Event 11
// 480 Temporary Unvailable
f_mtc_check_TP_MM_ECSCF_ECO_480TEMPAV_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // 480 Temporary Unavailables Event 14
f_mtc_check_TP_MW_PCSCF_ECO_480TEMPAV_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 23
f_mtc_check_TP_RX_PCSCF_STR_01(vc_vxlte_monitor_components.rx); // Event 24
f_mtc_check_TP_GX_PCRF_RAR_01(vc_vxlte_monitor_components.gx, true); // Event 25
f_mtc_check_TP_GX_PGW_RAA_02(vc_vxlte_monitor_components.gx); // Event 26
f_mtc_check_TP_RX_PCRF_STA_01(vc_vxlte_monitor_components.rx); // Event 27
f_mtc_check_TP_GM_PCSCF_480TEMPAV_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 28
f_mtc_check_TP_GM_PCSCF_ECO_ACK_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 29
f_mtc_check_TP_MW_PCSCF_ECO_ACK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 30
f_mtc_check_TP_MM_ECSCF_ECO_ACK_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // Event 31
f_mtc_userCheckCallTerminated(v_ueA); // Event 33
f_mtc_userCheckCallCancelled(v_psap); // Event 34
// Postamble
f_PO_user_home_deregistration(v_ueA);
f_PO_user_home_deregistration(v_psap);
//unmap/disconnect component ports
f_cf_user_down ( v_psap );
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
f_cf_adapter_down ( );
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
}
f_cf_adapter_down ( );
} // End of TC TD_VoLTE_ECO_INT_REJ_01_01
group f_TD_VoLTE_ECO_INT_REJ_01_01 {
function f_mtc_check_precond_TD_VoLTE_ECO_INT_REJ_01_01() runs on ImsTestCoordinator {
log("If the test case fails, please check the preconditions");
// TODO Add real code to check pre-conditions
} // End of function f_mtc_check_precond_TD_VoLTE_ECO_INT_REJ_01_01
} // End of group f_TD_VoLTE_ECO_INT_REJ_01_01
* @desc To demonstrate interaction between UE A and PSAP when an emergency session is rejected.
* @see ETSI TS 103 795-2 5.3.4.3 Emergency Session Reject
* @remark This is option 1: PSAP is not in IMS A network
testcase TD_VoLTE_ECO_INT_REJ_01_02() runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A_emergency );
var IotEquipmentUser v_psap := f_cf_create_IotEquipmentUser ( c_psap );
var ImsUserInfo v_userInfoA := f_getImUser ( PX_EUT_A_EMERGENCY );
var ImsUserInfo v_infoPsap := f_getImUser ( PX_PSAP );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_SIP_GMA_INTERFACENAME,
PX_DIAMETER_GX_INTERFACENAME,
PX_DIAMETER_RX_INTERFACENAME,
PX_SIP_MW_PE_INTERFACENAME,
PX_SIP_IC_INTERFACENAME // IBCF -> IMS -> PSAP
}))
{
var SipMessage v_sip;
f_cf_createVxLteMonitor();
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_user_up ( v_psap );
f_cf_VxLteMonitor_Up();
// Preamble
if (PX_PSAP_REGISTERED) {
f_mtc_userRegistration(v_psap, v_infoPsap);
} else {
// TODO Check OPTIONS from PSAP to E-CSCF
}
f_mtc_check_precond_TD_VoLTE_ECO_INT_REJ_01_02();
// Test body
//f_mtc_userInitiateCall (v_ueA, v_userTelInfoB);
2559
2560
2561
2562
2563
2564
2565
2566
2567
2568
2569
2570
2571
2572
2573
2574
2575
2576
2577
2578
2579
2580
2581
2582
2583
2584
2585
2586
2587
2588
2589
2590
2591
2592
2593
2594
f_mtc_check_TP_GM_PCSCF_ECO_INVITE_02(vc_vxlte_monitor_components.gmA, -, v_sip); // INVITE Event 3
f_mtc_check_TP_GM_PCSCF_ECO_100Trying_01(vc_vxlte_monitor_components.gmA, -, v_sip);
//Rx/Gx exchange after INVITE (SDP) was received at P-CSCF
f_mtc_check_TP_RX_PCSCF_AAR_03(vc_vxlte_monitor_components.rx);// Event 4
f_mtc_check_TP_GX_PCRF_RAR_01(vc_vxlte_monitor_components.gx, true); // Event 5
f_mtc_check_TP_GX_PGW_RAA_02(vc_vxlte_monitor_components.gx); // Event 6
f_mtc_check_TP_RX_PCRF_AAA_02(vc_vxlte_monitor_components.rx); // Event 7
f_mtc_check_TP_RX_PCSCF_RAA_01(vc_vxlte_monitor_components.rx);// Events 8,9
f_mtc_check_TP_GX_PCRF_CCA_01(vc_vxlte_monitor_components.gx); // Events 10,11
f_mtc_check_TP_MW_PCSCF_ECO_INVITE_02(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 12
f_mtc_check_TP_MW_PCSCF_ECO_100Trying_01(vc_vxlte_monitor_components.mwPE, -, v_sip);
f_mtc_check_TP_MW_IBCF_INVITE_01(vc_vxlte_monitor_components.mwEB); // Event 11
f_mtc_check_TP_MW_IBSCF_100Trying_01(vc_vxlte_monitor_components.mwEB, -, v_sip);
f_mtc_check_TP_IC_IBCF_INVITE_01(vc_vxlte_monitor_components.ic); // INVITE Event 12 (NOTE: comment out if ISC simulated by Ic)
// 480 Temporary Unavailable
f_mtc_check_TP_IC_IBCF_480TEMPAV_01(vc_vxlte_monitor_components.ic); // INVITE Event 12 (NOTE: comment out if ISC simulated by Ic)
f_mtc_check_TP_MW_PCSCF_ECO_480TEMPAV_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 23
f_mtc_check_TP_RX_PCSCF_STR_01(vc_vxlte_monitor_components.rx); // Event 24
f_mtc_check_TP_GX_PCRF_RAR_01(vc_vxlte_monitor_components.gx, true); // Event 25
f_mtc_check_TP_GX_PGW_RAA_02(vc_vxlte_monitor_components.gx); // Event 26
f_mtc_check_TP_RX_PCRF_STA_01(vc_vxlte_monitor_components.rx); // Event 27
f_mtc_check_TP_GM_PCSCF_480TEMPAV_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 28
f_mtc_check_TP_GM_PCSCF_ECO_ACK_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 29
f_mtc_check_TP_MW_PCSCF_ECO_ACK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 30
f_mtc_check_TP_IC_IBCF_ACK_01(vc_vxlte_monitor_components.mmB_PSAP, -, v_sip); // Event 31
f_mtc_userCheckCallTerminated(v_ueA); // Event 33
f_mtc_userCheckCallCancelled(v_psap); // Event 34
// Postamble
f_PO_user_home_deregistration(v_ueA);
f_PO_user_home_deregistration(v_psap);
//unmap/disconnect component ports
f_cf_user_down ( v_psap );
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
f_cf_adapter_down ( );
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
}
f_cf_adapter_down ( );
} // End of TC TD_VoLTE_ECO_INT_REJ_01_02
group f_TD_VoLTE_ECO_INT_REJ_01_02 {
function f_mtc_check_precond_TD_VoLTE_ECO_INT_REJ_01_02() runs on ImsTestCoordinator {
log("If the test case fails, please check the preconditions");
// TODO Add real code to check pre-conditions
} // End of function f_mtc_check_precond_TD_VoLTE_ECO_INT_REJ_01_02
} // End of group f_TD_VoLTE_ECO_INT_REJ_01_02
/**
* @desc To demonstrate interaction between UE A and PSAP when an emergency session is rejected.
* @see ETSI TS 103 795-2 5.3.4.3 Emergency Session Reject
* @remark This is option 1: PSAP is in PSTN network
*/
testcase TD_VoLTE_ECO_INT_REJ_01_03() runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A_emergency );
var IotEquipmentUser v_psap := f_cf_create_IotEquipmentUser ( c_psap );
var ImsUserInfo v_userInfoA := f_getImUser ( PX_EUT_A_EMERGENCY );
var ImsUserInfo v_infoPsap := f_getImUser ( PX_PSAP );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_SIP_GMA_INTERFACENAME,
PX_DIAMETER_GX_INTERFACENAME,
PX_DIAMETER_RX_INTERFACENAME,
PX_SIP_MW_PE_INTERFACENAME,
PX_SIP_IC_INTERFACENAME // IBCF -> IMS -> PSAP
}))
{
var SipMessage v_sip;
f_cf_createVxLteMonitor();
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_user_up ( v_psap );
f_cf_VxLteMonitor_Up();
// Preamble
if (PX_PSAP_REGISTERED) {
f_mtc_userRegistration(v_psap, v_infoPsap);
} else {
// TODO Check OPTIONS from PSAP to E-CSCF
}
f_mtc_check_precond_TD_VoLTE_ECO_INT_REJ_01_03();
// Test body
//f_mtc_userInitiateCall (v_ueA, v_userTelInfoB);
// TODO
f_mtc_userCheckCallTerminated(v_ueA); // Event 33
f_mtc_userCheckCallCancelled(v_psap); // Event 34
// Postamble
f_PO_user_home_deregistration(v_ueA);
f_PO_user_home_deregistration(v_psap);
//unmap/disconnect component ports
f_cf_user_down ( v_psap );
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
f_cf_adapter_down ( );
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
}
f_cf_adapter_down ( );
} // End of TC TD_VoLTE_ECO_INT_REJ_01_03
group f_TD_VoLTE_ECO_INT_REJ_01_03 {
function f_mtc_check_precond_TD_VoLTE_ECO_INT_REJ_01_03() runs on ImsTestCoordinator {
log("If the test case fails, please check the preconditions");
// TODO Add real code to check pre-conditions
} // End of function f_mtc_check_precond_TD_VoLTE_ECO_INT_REJ_01_03
} // End of group f_TD_VoLTE_ECO_INT_REJ_01_03
/**
* @desc To demonstrate interaction between UE A and P-CSCF when an emergency session is rejected.
* @see ETSI TS 103 795-2 Clause 5.3.4.3 Emergency Session Reject
testcase TD_VoLTE_ECO_INT_REJ_02() runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A_emergency );
var IotEquipmentUser v_psap := f_cf_create_IotEquipmentUser ( c_psap );
var ImsUserInfo v_userInfoA := f_getImUser ( PX_EUT_A_EMERGENCY );
var ImsUserInfo v_infoPsap := f_getImUser ( PX_PSAP );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_SIP_GMA_INTERFACENAME,
PX_DIAMETER_GX_INTERFACENAME,
PX_DIAMETER_RX_INTERFACENAME,
PX_SIP_MW_PE_INTERFACENAME,
PX_SIP_MW_EB_INTERFACENAME, // E-CSCF -> IBCF
PX_SIP_MM_B_PSAP_INTERFACENAME // E-CSCCF -> PSAP
}))
{
var SipMessage v_sip;
f_cf_createVxLteMonitor();
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_user_up ( v_psap );
f_cf_VxLteMonitor_Up();
if (PX_PSAP_REGISTERED) {
f_mtc_userRegistration(v_psap, v_infoPsap);
} else {
// TODO Check OPTIONS from PSAP to E-CSCF
}
f_mtc_check_precond_TD_VoLTE_ECO_INT_REJ_02();
// Test body
//f_mtc_userInitiateCall (v_ueA, v_userTelInfoB);
// TODO
f_mtc_userCheckCallTerminated(v_ueA); // Event 33
f_mtc_userCheckCallCancelled(v_psap); // Event 34
// Postamble
f_PO_user_home_deregistration(v_ueA);
f_PO_user_home_deregistration(v_psap);
//unmap/disconnect component ports
f_cf_user_down ( v_psap );
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
f_cf_adapter_down ( );
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
}
f_cf_adapter_down ( );
} // End of TC TD_VoLTE_ECO_INT_REJ_02
group f_TD_VoLTE_ECO_INT_REJ_02 {
function f_mtc_check_precond_TD_VoLTE_ECO_INT_REJ_02() runs on ImsTestCoordinator {
log("If the test case fails, please check the preconditions");
// TODO Add real code to check pre-conditions
} // End of function f_mtc_check_precond_TD_VoLTE_ECO_INT_REJ_02
} // End of group f_TD_VoLTE_ECO_INT_REJ_02
} // End of group EmergencySessionAbortOrReject
} // End of group EmergencySessionEmergencyBearerOperations
/**
* @see ETSI TS 103 795-2 Clause 5.5 Emergency Network Detachment
*/
group EmergencyNetworkDetachment {
group EmergencySessionDetachment {
* @desc To demonstrate UE initiated network emergency detachment (IP-CAN session termination) for a UE that has not yet emergency registered to the IMS or for UE that has been emergency registered to the IMS
* @see ETSI TS 103 795-2 Clause 5.5.1 UE Emergency Network Detachment (with/without Emergency Registration)
*/
testcase TC_VoLTE_ECO_INT_DTC_01 ( ) runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A );
var ImsUserInfo v_userInfoA := f_getImUser ( PX_EUT_A );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_DIAMETER_GX_INTERFACENAME})){
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_VxLteMonitor_Up();
//preamble
f_mtc_userRadioEnabled ( v_ueA, true, true ); // UA-A trigger an initial network_attachment by enabling radio interface of its mobile
f_mtc_userRadioEnabled ( v_ueA, false, true );
// test body
// Check that user A starts initial network attachment
f_mtc_check_TP_GX_PCRF_ECO_CCA_02 ( vc_vxlte_monitor_components.gx, false ); // Check (CCA – Event 3)
//unmap/disconnect component ports
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
f_cf_adapter_down ( );
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
}
} // End of TC TC_VoLTE_ECO_INT_DTC_01
/**
* @desc To demonstrate UE initiated emergency network detachment (emergency IP-CAN session termination) for a UE that is emergency registered to IMS and also has active emergency session
* @see ETSI TS 103 795-2 Clause 5.5.2 UE Emergency Network Detachment with Previously Established Emergency Registration & Emergency Session
*/
testcase TC_VoLTE_ECO_INT_DTC_02 ( ) runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A_emergency );
var ImsUserInfo v_userInfoA := f_getImUser ( PX_EUT_A_EMERGENCY );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_DIAMETER_GX_INTERFACENAME})){
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_VxLteMonitor_Up();
//preamble
f_mtc_userRadioEnabled ( v_ueA, true, true ); // UA-A trigger an initial network_attachment by enabling radio interface of its mobile
f_mtc_userRadioEnabled ( v_ueA, false, true );
// test body
// TODO
//postamble
//unmap/disconnect component ports
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
f_cf_adapter_down ( );
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
}
} // End of TC TC_VoLTE_ECO_INT_DTC_02
} // End of group EmergencySessionDetachment
2861
2862
2863
2864
2865
2866
2867
2868
2869
2870
2871
2872
2873
2874
2875
2876
2877
2878
2879
2880
2881
2882
2883
2884
2885
2886
2887
} // End of group EmergencyNetworkDetachment
} // End of group Interoperability
/**
* @see ETSI TS 103 795-2 Clause 6 Test Descriptions (Roaming)
*/
group Roaming {
/**
* @see ETSI TS 103 795-2 6.1 Network Attachment
*/
group NetworkAttachment {
} // End of group NetworkAttachment
/**
* @see ETSI TS 103 795-2 Clause 6.2 IMS Emergency Registration in a visited network
*/
group IMSEmergencyRegistration {
} // End of group IMSEmergencyRegistration
} // End of group Roaming
} // End of module AtsImsIot_Emergency