Newer
Older
/**
* @desc To demonstrate the establishment of dedicated bearers at the originating EPC due to SIP emergency session establishment within an emergency registration.
* PSAP is located in the PSTN connected via BGCF.
* @see ETSI TS 103 795-2 Clause 5.3.1.8 UE calling PSAP in PSTN via BGCF
*/
testcase TD_VoLTE_ECO_INT_INI_07() runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A_emergency );
var IotEquipmentUser v_psap := f_cf_create_IotEquipmentUser ( c_psap );
var ImsUserInfo v_userInfoA := f_getImUser ( PX_EUT_A_EMERGENCY );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_SIP_GMA_INTERFACENAME,
PX_DIAMETER_GX_INTERFACENAME,
PX_DIAMETER_RX_INTERFACENAME,
PX_SIP_MW_PE_INTERFACENAME,
}))
{
var SipMessage v_sip;
f_cf_createVxLteMonitor();
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_user_up ( v_psap );
f_cf_VxLteMonitor_Up();
// Preamble
// PSAP is not known from the IMS A
f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_07();
// Test body
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
f_mtc_check_TP_GM_PCSCF_INVITE_02(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 1
f_mtc_check_TP_GM_PCSCF_ECO_100Trying_01(vc_vxlte_monitor_components.gmA, -, v_sip);
//Rx/Gx exchange after INVITE (SDP) was received at P-CSCF
f_mtc_check_TP_RX_PCSCF_AAR_03(vc_vxlte_monitor_components.rx);// Event 2
f_mtc_check_TP_GX_PCRF_RAR_01(vc_vxlte_monitor_components.gx, true); // Event 3
f_mtc_check_TP_GX_PGW_RAA_02(vc_vxlte_monitor_components.gx); // Event 4
f_mtc_check_TP_RX_PCRF_AAA_02(vc_vxlte_monitor_components.rx); // Event 5
f_mtc_check_TP_RX_PCSCF_RAA_01(vc_vxlte_monitor_components.rx);// Events 7,8
//f_mtc_check_TP_GX_PCRF_CCA_01(vc_vxlte_monitor_components.gx); // Events 6,9
f_mtc_check_TP_MW_PCSCF_ECO_INVITE_02(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 10
f_mtc_check_TP_MW_PCSCF_ECO_100Trying_01(vc_vxlte_monitor_components.mwPE, -, v_sip);
// FIXME f_mtc_check_TP_MW_IBCF_xxx <--> f_mtc_check_TP_ML_ECSCF_ECO_xxx
f_mtc_check_TP_MW_IBCF_INVITE_01(vc_vxlte_monitor_components.mwEB, -, v_sip); // Event 11
f_mtc_check_TP_MW_IBCF_100Trying_01(vc_vxlte_monitor_components.mwEB, -, v_sip);
// 183 Session Progress
f_mtc_check_TP_MW_IBCF_183SESSION_PROGRESS_01(vc_vxlte_monitor_components.mwEB, -, v_sip); // Event 14
f_mtc_check_TP_MW_PCSCF_ECO_183SESSION_PROGRESS_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 15
f_mtc_check_TP_GM_PCSCF_183SESSION_PROGRESS_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 20
//Rx/Gx exchange after 183(SDP) was received at P-CSCF
f_mtc_check_TP_RX_PCSCF_AAR_04(vc_vxlte_monitor_components.rx);// Event 16
f_mtc_check_TP_GX_PCRF_RAR_01(vc_vxlte_monitor_components.gx, true); // Event 17
f_mtc_check_TP_GX_PGW_RAA_02(vc_vxlte_monitor_components.gx); // Event 18
f_mtc_check_TP_RX_PCRF_AAA_02(vc_vxlte_monitor_components.rx); // Event 19
f_mtc_check_TP_IC_IBCF_180RINGING_01(vc_vxlte_monitor_components.ic, true); // 180 Ringing – Event 22
f_mtc_check_TP_MW_IBCF_180RINGING_01(vc_vxlte_monitor_components.mwEB, -, v_sip); // Event 23
f_mtc_check_TP_MW_PCSCF_ECO_180RINGING_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 24
f_mtc_check_TP_GM_PCSCF_180RINGING_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 25
f_mtc_userCheckRinging(v_psap);
f_mtc_userCheckPeerIsRinging(v_ueA);
f_mtc_userAnswerCall(v_psap);
f_mtc_check_TP_IC_IBCF_2XXRESP_01(vc_vxlte_monitor_components.ic, true); // 200 OK – Event 26
f_mtc_check_TP_IC_IBCF_2XXRESP_02(vc_vxlte_monitor_components.ic, true); // 200 OK – Event 26
f_mtc_check_TP_IC_IBCF_2XXRESP_03(vc_vxlte_monitor_components.ic); // 200 OK – Event 26
f_mtc_check_TP_MW_IBCF_200OK_01(vc_vxlte_monitor_components.mwEB, -, v_sip); // Event 27
f_mtc_check_TP_MW_PCSCF_ECO_200OK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 28
f_mtc_check_TP_GM_PCSCF_200OK_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 29
f_mtc_check_TP_GM_PCSCF_ACK_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 30
f_mtc_check_TP_MW_PCSCF_ECO_ACK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 31
f_mtc_check_TP_MW_IBSCF_ACK_01(vc_vxlte_monitor_components.mwEB, -, v_sip); // Event 32
f_mtc_check_TP_IC_IBCF_ACK_01(vc_vxlte_monitor_components.ic); // ACK – Event 33
f_mtc_userCheckCallEstablished(v_ueA); // Event 34
f_mtc_userCheckCallEstablished(v_psap); // Event 34
// Postamble
f_mtc_EndCall(v_ueA);
f_PO_user_home_deregistration(v_ueA);
f_PO_user_home_deregistration(v_psap);
//f_cf_int_call_down(v_config);
//unmap/disconnect component ports
f_cf_user_down ( v_psap );
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
}
f_cf_adapter_down ( );
} // End of TC TD_VoLTE_ECO_INT_INI_07
group f_TD_VoLTE_ECO_INT_INI_07 {
function f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_07() runs on ImsTestCoordinator {
log("If the test case fails, please check the preconditions");
// TODO Add real code to check pre-conditions
} // End of function f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_07
} // End of group f_TD_VoLTE_ECO_INT_INI_07
/**
* @desc To demonstrate the establishment of dedicated bearers at the originating EPC due to SIP emergency session establishment within an emergency registration.
* PSAP is located in the PSTN connected via BGCF. The PSAP URI is delivered by the LRF
* @see ETSI TS 103 795-2 Clause 5.3.1.9 UE calling PSAP in PSTN via BGCF, LRF derived PSAP URI
*/
testcase TD_VoLTE_ECO_INT_INI_08() runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A_emergency );
var IotEquipmentUser v_psap := f_cf_create_IotEquipmentUser ( c_psap );
var ImsUserInfo v_userInfoA := f_getImUser ( PX_EUT_A_EMERGENCY );
var ImsUserInfo v_infoPsap := f_getImUser ( PX_PSAP );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_SIP_GMA_INTERFACENAME,
PX_DIAMETER_GX_INTERFACENAME,
PX_DIAMETER_RX_INTERFACENAME,
PX_SIP_MW_PE_INTERFACENAME,
PX_SIP_ML_LRF_INTERFACENAME // E-CSCF -> LRF: mlE_LTF
}))
{
var SipMessage v_sip;
f_cf_createVxLteMonitor();
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_user_up ( v_psap );
f_cf_VxLteMonitor_Up();
// Preamble
f_mtc_userRegistration(v_ueA, v_userInfoA);
f_mtc_userRegistration(v_psap, v_infoPsap);
f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_08();
// Test body
//f_mtc_userInitiateCall (v_ueA, v_userTelInfoB);
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
f_mtc_check_TP_GM_PCSCF_INVITE_02(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 1
f_mtc_check_TP_GM_PCSCF_ECO_100Trying_01(vc_vxlte_monitor_components.gmA, -, v_sip);
//Rx/Gx exchange after INVITE (SDP) was received at P-CSCF
f_mtc_check_TP_RX_PCSCF_AAR_03(vc_vxlte_monitor_components.rx);// Event 2
f_mtc_check_TP_GX_PCRF_RAR_01(vc_vxlte_monitor_components.gx, true); // Event 3
f_mtc_check_TP_GX_PGW_RAA_02(vc_vxlte_monitor_components.gx); // Event 4
f_mtc_check_TP_RX_PCRF_AAA_02(vc_vxlte_monitor_components.rx); // Event 5
f_mtc_check_TP_RX_PCSCF_RAA_01(vc_vxlte_monitor_components.rx);// Events 7,8
//f_mtc_check_TP_GX_PCRF_CCA_01(vc_vxlte_monitor_components.gx); // Events 6,9
f_mtc_check_TP_MW_PCSCF_ECO_INVITE_02(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 10
f_mtc_check_TP_MW_PCSCF_ECO_100Trying_01(vc_vxlte_monitor_components.mwPE, -, v_sip);
// FIXME f_mtc_check_TP_MW_IBCF_xxx <--> f_mtc_check_TP_ML_EBCF_xxx
f_mtc_check_TP_MW_IBCF_INVITE_01(vc_vxlte_monitor_components.mlE_LRF, -, v_sip); // Event 11
f_mtc_check_TP_MX_LRF_3xxAny_01(vc_vxlte_monitor_components.mlE_LRF, -, v_sip); // Event 12
f_mtc_check_TP_MW_IBCF_INVITE_01(vc_vxlte_monitor_components.mwEB, -, v_sip); // Event 13
f_mtc_check_TP_MW_IBCF_100Trying_01(vc_vxlte_monitor_components.mwEB, -, v_sip);
f_mtc_check_TP_IC_IBCF_INVITE_01(vc_vxlte_monitor_components.ic, true); // INVITE Event 14
f_mtc_check_TP_IC_IBCF_INVITE_02(vc_vxlte_monitor_components.ic, true); // INVITE Event 14
f_mtc_check_TP_IC_IBCF_183RESP_01(vc_vxlte_monitor_components.ic,-); // 183 Event 15
// 183 Session Progress
f_mtc_check_TP_MW_IBCF_183SESSION_PROGRESS_01(vc_vxlte_monitor_components.mwEB, -, v_sip); // Event 16
f_mtc_check_TP_MW_PCSCF_ECO_183SESSION_PROGRESS_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 17
f_mtc_check_TP_GM_PCSCF_183SESSION_PROGRESS_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 24
//Rx/Gx exchange after 183(SDP) was received at P-CSCF
f_mtc_check_TP_RX_PCSCF_AAR_04(vc_vxlte_monitor_components.rx);// Event 18
f_mtc_check_TP_GX_PCRF_RAR_01(vc_vxlte_monitor_components.gx, true); // Event 19
f_mtc_check_TP_GX_PGW_RAA_02(vc_vxlte_monitor_components.gx); // Event 20
f_mtc_check_TP_RX_PCRF_AAA_02(vc_vxlte_monitor_components.rx); // Event 21
f_mtc_check_TP_IC_IBCF_180RINGING_01(vc_vxlte_monitor_components.ic, true); // 180 Ringing – Event 24
f_mtc_check_TP_MW_IBCF_180RINGING_01(vc_vxlte_monitor_components.mwEB, -, v_sip); // Event 25
f_mtc_check_TP_MW_PCSCF_ECO_180RINGING_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 26
f_mtc_check_TP_GM_PCSCF_180RINGING_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 27
f_mtc_userCheckRinging(v_psap);
f_mtc_userCheckPeerIsRinging(v_ueA);
f_mtc_userAnswerCall(v_psap);
f_mtc_check_TP_IC_IBCF_2XXRESP_01(vc_vxlte_monitor_components.ic, true); // 200 OK – Event 28
f_mtc_check_TP_IC_IBCF_2XXRESP_02(vc_vxlte_monitor_components.ic, true); // 200 OK – Event 28
f_mtc_check_TP_IC_IBCF_2XXRESP_03(vc_vxlte_monitor_components.ic); // 200 OK – Event 28
f_mtc_check_TP_MW_IBCF_200OK_01(vc_vxlte_monitor_components.mwEB, -, v_sip); // Event 29
f_mtc_check_TP_MW_PCSCF_ECO_200OK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 30
f_mtc_check_TP_GM_PCSCF_200OK_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 31
f_mtc_check_TP_GM_PCSCF_ACK_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 32
f_mtc_check_TP_MW_PCSCF_ECO_ACK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 33
f_mtc_check_TP_MW_IBSCF_ACK_01(vc_vxlte_monitor_components.mwEB, -, v_sip); // Event 34
f_mtc_check_TP_IC_IBCF_ACK_01(vc_vxlte_monitor_components.ic); // ACK – Event 35
f_mtc_userCheckCallEstablished(v_ueA); // Event 36
f_mtc_userCheckCallEstablished(v_psap); // Event 36
// Postamble
f_mtc_EndCall(v_ueA);
f_PO_user_home_deregistration(v_ueA);
f_PO_user_home_deregistration(v_psap);
//f_cf_int_call_down(v_config);
//unmap/disconnect component ports
f_cf_user_down ( v_psap );
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
}
f_cf_adapter_down ( );
} // End of TC TD_VoLTE_ECO_INT_INI_08
group f_TD_VoLTE_ECO_INT_INI_08 {
function f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_08() runs on ImsTestCoordinator {
log("If the test case fails, please check the preconditions");
// TODO Add real code to check pre-conditions
} // End of function f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_08
} // End of group f_TD_VoLTE_ECO_INT_INI_08
/**
* @desc
* @see ETSI TS 103 795-2 Clause 5.3.1.10 UE calling PSAP over AS with non-emergency registration
*/
testcase TD_VoLTE_ECO_INT_INI_09() runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A_emergency );
var IotEquipmentUser v_psap := f_cf_create_IotEquipmentUser ( c_psap );
var ImsUserInfo v_userInfoA := f_getImUser ( PX_EUT_A_EMERGENCY );
var ImsUserInfo v_infoPsap := f_getImUser ( PX_PSAP );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_SIP_GMA_INTERFACENAME,
PX_DIAMETER_GX_INTERFACENAME,
PX_DIAMETER_RX_INTERFACENAME,
PX_SIP_MW_PE_INTERFACENAME,
PX_SIP_MM_PSAP_INTERFACENAME
}))
{
var SipMessage v_sip;
f_cf_createVxLteMonitor();
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_user_up ( v_psap );
f_cf_VxLteMonitor_Up();
// Preamble
f_mtc_userRegistration(v_ueA, v_userInfoA);
f_mtc_userRegistration(v_psap, v_infoPsap);
f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_09_01();
// Test body
//f_mtc_userInitiateCall (v_ueA, v_userTelInfoB);
// TODO
f_mtc_userCheckCallEstablished(v_ueA); // Event 34
f_mtc_userCheckCallEstablished(v_psap); // Event 34
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
1332
1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
1350
1351
1352
1353
1354
1355
1356
1357
1358
1359
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
1370
1371
1372
1373
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1385
// Postamble
f_mtc_EndCall(v_ueA);
f_PO_user_home_deregistration(v_ueA);
f_PO_user_home_deregistration(v_psap);
//f_cf_int_call_down(v_config);
//unmap/disconnect component ports
f_cf_user_down ( v_psap );
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
}
f_cf_adapter_down ( );
} // End of TC TD_VoLTE_ECO_INT_INI_09
group f_TD_VoLTE_ECO_INT_INI_09 {
function f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_09_01() runs on ImsTestCoordinator {
log("If the test case fails, please check the preconditions");
// TODO Add real code to check pre-conditions
} // End of function f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_09
} // End of group f_TD_VoLTE_ECO_INT_INI_09
/**
* @desc To demonstrate that if an emergency call has been terminated, the attempt by the PSAP call taker to communicate back to the emergency caller shall be answered.
* @see ETSI TS 103 795-2 Clause 5.3.1.11 Callback from PSAP
* @remark Ipetion 1: PSAP in IMS A
*/
testcase TD_VoLTE_ECO_INT_INI_10_01() runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A_emergency );
var IotEquipmentUser v_psap := f_cf_create_IotEquipmentUser ( c_psap );
var ImsUserInfo v_userInfoA := f_getImUser ( PX_EUT_A_EMERGENCY );
var ImsUserInfo v_infoPsap := f_getImUser ( PX_PSAP );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_SIP_GMA_INTERFACENAME,
PX_SIP_MW_PE_INTERFACENAME,
PX_SIP_EB_INTERFACENAME // E-CSCF -> BGCF
}))
{
var SipMessage v_sip;
f_cf_createVxLteMonitor();
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_user_up ( v_psap );
f_cf_VxLteMonitor_Up();
// Preamble
f_mtc_userRegistration(v_ueA, v_userInfoA);
f_mtc_userRegistration(v_psap, v_infoPsap);
f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_10_01();
// Test body
//f_mtc_userInitiateCall (v_ueA, v_userTelInfoB);
f_mtc_check_TP_MM_ECSCF_ECO_INVITE_01(vc_vxlte_monitor_components.mwB_PSAP, -, v_sip); // INVITE Event 1
f_mtc_check_TP_MM_ECSCF_ECO_100Trying_01(vc_vxlte_monitor_components.mwB_PSAP, -, v_sip);
f_mtc_check_TP_MW_PCSCF_ECO_INVITE_02(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 6
f_mtc_check_TP_MW_PCSCF_ECO_100Trying_01(vc_vxlte_monitor_components.mwPE, -, v_sip);
f_mtc_check_TP_GM_PCSCF_ECO_INVITE_02(vc_vxlte_monitor_components.gmA, -, v_sip); // INVITE Event 7
f_mtc_check_TP_GM_PCSCF_ECO_100Trying_01(vc_vxlte_monitor_components.gmA, -, v_sip);
// 183 Session Progress
f_mtc_check_TP_GM_PCSCF_183SESSION_PROGRESS_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 8
f_mtc_check_TP_MW_PCSCF_ECO_183SESSION_PROGRESS_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 9
f_mtc_check_TP_MM_ECSCF_ECO_183SESSION_PROGRESS_01(vc_vxlte_monitor_components.mwB_PSAP, -, v_sip); // 183 In Progress Event 10
f_mtc_check_TP_GM_PCSCF_180RINGING_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 16
f_mtc_check_TP_MW_PCSCF_ECO_180RINGING_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 17
f_mtc_check_TP_MM_ECSCF_ECO_180RINGING_01(vc_vxlte_monitor_components.mwB_PSAP); // 180 Ringing – Event 20
f_mtc_userCheckRinging(v_ueA); // Event 15
f_mtc_userCheckPeerIsRinging(v_psap); // Event 15
f_mtc_userAnswerCall(v_ueA); // Event 26
f_mtc_check_TP_GM_PCSCF_200OK_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 18
f_mtc_check_TP_MW_PCSCF_ECO_200OK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 10
f_mtc_check_TP_MM_ECSCF_ECO_200OK_01(vc_vxlte_monitor_components.mwB_PSAP, -, v_sip); // 200 OK Event 21
f_mtc_check_TP_MM_ECSCF_ECO_ACK_01(vc_vxlte_monitor_components.mwB_PSAP); // ACK – Event 22
f_mtc_check_TP_MW_PCSCF_ECO_ACK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 35
f_mtc_check_TP_GM_PCSCF_ACK_01(vc_vxlte_monitor_components.gmA, -, v_sip); // ACK Event 36
f_mtc_userCheckCallEstablished(v_ueA); // Event 37
f_mtc_userCheckCallEstablished(v_psap); // Event 37
// Postamble
f_mtc_EndCall(v_ueA);
f_PO_user_home_deregistration(v_ueA);
f_PO_user_home_deregistration(v_psap);
//f_cf_int_call_down(v_config);
//unmap/disconnect component ports
f_cf_user_down ( v_psap );
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
}
f_cf_adapter_down ( );
} // End of TC TD_VoLTE_ECO_INT_INI_10_01
group f_TD_VoLTE_ECO_INT_INI_10_01 {
function f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_10_01() runs on ImsTestCoordinator {
log("If the test case fails, please check the preconditions");
// TODO Add real code to check pre-conditions
} // End of function f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_10_01
} // End of group f_TD_VoLTE_ECO_INT_INI_10_01
/**
* @desc To demonstrate that if an emergency call has been terminated, the attempt by the PSAP call taker to communicate back to the emergency caller shall be answered.
* @see ETSI TS 103 795-2 Clause 5.3.1.11 Callback from PSAP
* @remark Ipetion 1: PSAP NOT in IMS A
*/
testcase TD_VoLTE_ECO_INT_INI_10_02() runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A_emergency );
var IotEquipmentUser v_psap := f_cf_create_IotEquipmentUser ( c_psap );
var ImsUserInfo v_userInfoA := f_getImUser ( PX_EUT_A_EMERGENCY );
var ImsUserInfo v_infoPsap := f_getImUser ( PX_PSAP );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_SIP_GMA_INTERFACENAME,
PX_SIP_MW_PE_INTERFACENAME,
PX_SIP_EB_INTERFACENAME, // E-CSCF -> IBCF
PX_SIP_IC_INTERFACENAME // IBCF -> IMS_B -> PSAP
}))
{
var SipMessage v_sip;
f_cf_createVxLteMonitor();
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_user_up ( v_psap );
f_cf_VxLteMonitor_Up();
// Preamble
f_mtc_userRegistration(v_ueA, v_userInfoA);
f_mtc_userRegistration(v_psap, v_infoPsap);
f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_10_02();
// Test body
//f_mtc_userInitiateCall (v_ueA, v_userTelInfoB);
1449
1450
1451
1452
1453
1454
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
1466
1467
1468
1469
1470
1471
1472
1473
1474
1475
1476
1477
1478
1479
1480
1481
1482
1483
1484
1485
f_mtc_check_TP_IC_IBCF_INVITE_01(vc_vxlte_monitor_components.ic, -, v_sip); // Event 21
f_mtc_check_TP_GM_PCSCF_ECO_100Trying_01(vc_vxlte_monitor_components.ic, -, v_sip);
f_mtc_check_TP_MW_IBCF_INVITE_01(vc_vxlte_monitor_components.mwEB, -, v_sip); // Event 3
f_mtc_check_TP_MW_IBCF_100Trying_01(vc_vxlte_monitor_components.mwEB, -, v_sip);
f_mtc_check_TP_MW_PCSCF_ECO_INVITE_02(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 6
f_mtc_check_TP_MW_PCSCF_ECO_100Trying_01(vc_vxlte_monitor_components.mwPE, -, v_sip);
f_mtc_check_TP_GM_PCSCF_INVITE_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 7
f_mtc_check_TP_GM_PCSCF_ECO_100Trying_01(vc_vxlte_monitor_components.gmA, -, v_sip);
// 183 Session Progress
f_mtc_check_TP_GM_PCSCF_183SESSION_PROGRESS_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 8
f_mtc_check_TP_MW_PCSCF_ECO_183SESSION_PROGRESS_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 9
f_mtc_check_TP_MM_ECSCF_ECO_183SESSION_PROGRESS_01(vc_vxlte_monitor_components.mwB_PSAP, -, v_sip); // 183 In Progress Event 10
f_mtc_check_TP_GM_PCSCF_180RINGING_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 16
f_mtc_check_TP_MW_PCSCF_ECO_180RINGING_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 17
f_mtc_check_TP_MM_ECSCF_ECO_180RINGING_01(vc_vxlte_monitor_components.mwB_PSAP); // 180 Ringing – Event 20
f_mtc_userCheckRinging(v_ueA); // Event 15
f_mtc_userCheckPeerIsRinging(v_psap); // Event 15
f_mtc_userAnswerCall(v_ueA); // Event 26
f_mtc_check_TP_GM_PCSCF_200OK_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 18
f_mtc_check_TP_MW_PCSCF_ECO_200OK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 10
f_mtc_check_TP_MM_ECSCF_ECO_200OK_01(vc_vxlte_monitor_components.mwB_PSAP, -, v_sip); // 200 OK Event 21
f_mtc_check_TP_MM_ECSCF_ECO_ACK_01(vc_vxlte_monitor_components.mwB_PSAP); // ACK – Event 22
f_mtc_check_TP_MW_PCSCF_ECO_ACK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 35
f_mtc_check_TP_GM_PCSCF_ACK_01(vc_vxlte_monitor_components.gmA, -, v_sip); // ACK Event 36
f_mtc_userCheckCallEstablished(v_ueA); // Event 37
f_mtc_userCheckCallEstablished(v_psap); // Event 37
// Postamble
f_mtc_EndCall(v_ueA);
f_PO_user_home_deregistration(v_ueA);
f_PO_user_home_deregistration(v_psap);
//f_cf_int_call_down(v_config);
//unmap/disconnect component ports
f_cf_user_down ( v_psap );
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
}
f_cf_adapter_down ( );
} // End of TC TD_VoLTE_ECO_INT_INI_10_02
group f_TD_VoLTE_ECO_INT_INI_10_02 {
function f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_10_02() runs on ImsTestCoordinator {
log("If the test case fails, please check the preconditions");
// TODO Add real code to check pre-conditions
} // End of function f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_10_02
} // End of group f_TD_VoLTE_ECO_INT_INI_10_02
/**
* @desc To demonstrate that if an emergency call has been terminated, the attempt by the PSAP call taker to communicate back to the emergency caller shall be answered.
* @see ETSI TS 103 795-2 Clause 5.3.1.11 Callback from PSAP
* @remark Ipetion 1: PSAP in PSTN A
*/
testcase TD_VoLTE_ECO_INT_INI_10_03() runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A_emergency );
var IotEquipmentUser v_psap := f_cf_create_IotEquipmentUser ( c_psap );
var ImsUserInfo v_userInfoA := f_getImUser ( PX_EUT_A_EMERGENCY );
var ImsUserInfo v_infoPsap := f_getImUser ( PX_PSAP );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_SIP_GMA_INTERFACENAME,
PX_DIAMETER_GX_INTERFACENAME,
PX_DIAMETER_RX_INTERFACENAME,
PX_SIP_MW_PE_INTERFACENAME,
}))
{
var SipMessage v_sip;
f_cf_createVxLteMonitor();
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_user_up ( v_psap );
f_cf_VxLteMonitor_Up();
// Preamble
f_mtc_userRegistration(v_ueA, v_userInfoA);
f_mtc_userRegistration(v_psap, v_infoPsap);
f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_10_03();
// Test body
//f_mtc_userInitiateCall (v_ueA, v_userTelInfoB);
// TODO
f_mtc_userCheckCallEstablished(v_ueA); // Event 34
f_mtc_userCheckCallEstablished(v_psap); // Event 34
// Postamble
f_mtc_EndCall(v_ueA);
f_PO_user_home_deregistration(v_ueA);
f_PO_user_home_deregistration(v_psap);
//f_cf_int_call_down(v_config);
//unmap/disconnect component ports
f_cf_user_down ( v_psap );
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
}
f_cf_adapter_down ( );
} // End of TC TD_VoLTE_ECO_INT_INI_10_03
group f_TD_VoLTE_ECO_INT_INI_10_03 {
function f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_10_03() runs on ImsTestCoordinator {
log("If the test case fails, please check the preconditions");
// TODO Add real code to check pre-conditions
} // End of function f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_10_03
} // End of group f_TD_VoLTE_ECO_INT_INI_10_03
} // End of group EmergencySessionEstablishment
group EmergencySessionRelease {
/**
* @desc To perform originating UE session release and the tear down of related dedicated bearers.
* @see ETSI TS 103 795-2 Clause 5.3.3.1 UE Initiated Emergency Session Release
* @remark This is option 1: PSAP is in IMS A network
*/
testcase TD_VoLTE_ECO_INT_REL_01_01() runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A_emergency );
var IotEquipmentUser v_psap := f_cf_create_IotEquipmentUser ( c_psap );
var ImsUserInfo v_userInfoA := f_getImUser ( PX_EUT_A_EMERGENCY );
var ImsUserInfo v_infoPsap := f_getImUser ( PX_PSAP );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_SIP_GMA_INTERFACENAME,
PX_DIAMETER_GX_INTERFACENAME,
PX_DIAMETER_RX_INTERFACENAME,
PX_SIP_MW_PE_INTERFACENAME,
PX_SIP_MM_PSAP_INTERFACENAME // E-CSCCF -> PSAP
}))
{
var SipMessage v_sip;
f_cf_createVxLteMonitor();
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_user_up ( v_psap );
f_cf_VxLteMonitor_Up();
// Preamble
f_mtc_userRegistration(v_ueA, v_userInfoA);
f_mtc_userRegistration(v_psap, v_infoPsap);
f_mtc_userInitiateCall (v_ueA, v_infoPsap);
f_mtc_userCheckRinging(v_psap);
f_mtc_userCheckPeerIsRinging(v_ueA);
f_mtc_userAnswerCall(v_psap);
f_mtc_userCheckCallEstablished(v_ueA); // Event 1
f_mtc_userCheckCallEstablished(v_psap); // Event 1
f_mtc_check_precond_TD_VoLTE_ECO_INT_REL_01_01();
// Test body
//f_mtc_userInitiateCall (v_ueA, v_userTelInfoB);
f_mtc_check_TP_GM_PCSCF_ECO_BYE_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 2
f_mtc_check_TP_MW_PCSCF_ECO_BYE_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 3
f_mtc_check_TP_MM_ECSCF_ECO_BYE_01(vc_vxlte_monitor_components.mwB_PSAP, -, v_sip); // Event 4
//Rx/Gx exchange after BYE was received at P-CSCF
f_mtc_check_TP_RX_PCSCF_STR_01(vc_vxlte_monitor_components.rx); // (STR – Event 10
f_mtc_check_TP_GX_PCRF_RAR_02(vc_vxlte_monitor_components.gx, true); // (RAR – Event 11)
f_mtc_check_TP_GX_PGW_RAA_03(vc_vxlte_monitor_components.gx); // (RAA – Event 12)
f_mtc_check_TP_RX_PCRF_STA_01(vc_vxlte_monitor_components.rx); // (STA – Event 13)
f_mtc_check_TP_MW_IBCF_ECO_200OK_01(vc_vxlte_monitor_components.mwB_PSAP, -, v_sip); // Event 13
f_mtc_check_TP_MW_PCSCF_ECO_200OK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 18
f_mtc_check_TP_GM_PCSCF_200OK_02(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 19
f_mtc_userCheckCallTerminated(v_ueA); // Event 20
f_mtc_userCheckCallCancelled(v_psap); // Event 21
// Postamble
f_PO_user_home_deregistration(v_ueA);
f_PO_user_home_deregistration(v_psap);
//unmap/disconnect component ports
f_cf_user_down ( v_psap );
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
f_cf_adapter_down ( );
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
}
f_cf_adapter_down ( );
} // End of TC TD_VoLTE_ECO_INT_REL_01_01
group f_TD_VoLTE_ECO_INT_REL_01_01 {
function f_mtc_check_precond_TD_VoLTE_ECO_INT_REL_01_01() runs on ImsTestCoordinator {
log("If the test case fails, please check the preconditions");
// TODO Add real code to check pre-conditions
} // End of function f_mtc_check_precond_TD_VoLTE_ECO_INT_REL_01_01
} // End of group f_TD_VoLTE_ECO_INT_REL_01_01
/**
* @desc To perform originating UE session release and the tear down of related dedicated bearers.
* @see ETSI TS 103 795-2 Clause 5.3.3.1 UE Initiated Emergency Session Release
* @remark This is option 2: PSAP is not in IMS A network
*/
testcase TD_VoLTE_ECO_INT_REL_01_02 ( ) runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A_emergency );
var IotEquipmentUser v_psap := f_cf_create_IotEquipmentUser ( c_psap );
var ImsUserInfo v_userInfoA := f_getImUser ( PX_EUT_A_EMERGENCY );
var ImsUserInfo v_infoPsap := f_getImUser ( PX_PSAP );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_SIP_GMA_INTERFACENAME,
PX_DIAMETER_GX_INTERFACENAME,
PX_DIAMETER_RX_INTERFACENAME,
PX_SIP_MW_PE_INTERFACENAME,
PX_SIP_IC_INTERFACENAME // IBCF -> IMS_B -> PSAP
}))
{
var SipMessage v_sip;
f_cf_createVxLteMonitor();
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_user_up ( v_psap );
f_cf_VxLteMonitor_Up();
// Preamble
f_mtc_userRegistration(v_ueA, v_userInfoA);
f_mtc_userRegistration(v_psap, v_infoPsap);
f_mtc_userInitiateCall (v_ueA, v_infoPsap);
f_mtc_userCheckRinging(v_psap);
f_mtc_userCheckPeerIsRinging(v_ueA);
f_mtc_userAnswerCall(v_psap);
f_mtc_userCheckCallEstablished(v_ueA); // Event 1
f_mtc_userCheckCallEstablished(v_psap); // Event 1
f_mtc_check_precond_TD_VoLTE_ECO_INT_REL_01_02();
// Test body
//f_mtc_userInitiateCall (v_ueA, v_userTelInfoB);
f_mtc_check_TP_GM_PCSCF_ECO_BYE_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 2
f_mtc_check_TP_MW_PCSCF_ECO_BYE_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 3
f_mtc_check_TP_MW_ECO_IBCF_BYE_01(vc_vxlte_monitor_components.mwEB, -, v_sip); // Event 5
f_mtc_check_TP_IC_IBCF_ECO_BYE_01(vc_vxlte_monitor_components.ic); // Event 6
//Rx/Gx exchange after BYE was received at P-CSCF
f_mtc_check_TP_RX_PCSCF_STR_01(vc_vxlte_monitor_components.rx); // (STR – Event 10
f_mtc_check_TP_GX_PCRF_RAR_02(vc_vxlte_monitor_components.gx, true); // (RAR – Event 11)
f_mtc_check_TP_GX_PGW_RAA_03(vc_vxlte_monitor_components.gx); // (RAA – Event 12)
f_mtc_check_TP_RX_PCRF_STA_01(vc_vxlte_monitor_components.rx); // (STA – Event 13)
f_mtc_check_TP_MW_IBCF_ECO_200OK_01(vc_vxlte_monitor_components.mwEB, -, v_sip); // Event 15
f_mtc_check_TP_MW_PCSCF_ECO_200OK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 18
f_mtc_check_TP_GM_PCSCF_ECO_200OK_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 19
f_mtc_userCheckCallTerminated(v_ueA); // Event 22
f_mtc_userCheckCallCancelled(v_psap); // Event 23
// Postamble
f_PO_user_home_deregistration(v_ueA);
f_PO_user_home_deregistration(v_psap);
//unmap/disconnect component ports
f_cf_user_down ( v_psap );
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
f_cf_adapter_down ( );
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
}
f_cf_adapter_down ( );
} // End of TC TD_VoLTE_ECO_INT_REL_01_02
group f_TD_VoLTE_ECO_INT_REL_01_02 {
function f_mtc_check_precond_TD_VoLTE_ECO_INT_REL_01_02() runs on ImsTestCoordinator {
log("If the test case fails, please check the preconditions");
} // End of function f_mtc_check_precond_TD_VoLTE_ECO_INT_REL_01_02
} // End of f_TD_VoLTE_ECO_INT_REL_01_02
/**
* @desc To perform originating UE session release and the tear down of related dedicated bearers.
* @see ETSI TS 103 795-2 Clause 5.3.3.1 UE Initiated Emergency Session Release
* @remark This is option 3: PSAP is in PSTN network
*/
testcase TD_VoLTE_ECO_INT_REL_01_03() runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A_emergency );
var IotEquipmentUser v_psap := f_cf_create_IotEquipmentUser ( c_psap );
var ImsUserInfo v_userInfoA := f_getImUser ( PX_EUT_A_EMERGENCY );
var ImsUserInfo v_infoPsap := f_getImUser ( PX_PSAP );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_SIP_GMA_INTERFACENAME,
PX_DIAMETER_GX_INTERFACENAME,
PX_DIAMETER_RX_INTERFACENAME,
PX_SIP_MW_PE_INTERFACENAME,
}))
{
var SipMessage v_sip;
f_cf_createVxLteMonitor();
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_user_up ( v_psap );
f_cf_VxLteMonitor_Up();
// Preamble
f_mtc_userRegistration(v_ueA, v_userInfoA);
f_mtc_userRegistration(v_psap, v_infoPsap);
f_mtc_userInitiateCall (v_ueA, v_infoPsap);
f_mtc_userCheckRinging(v_psap);
f_mtc_userCheckPeerIsRinging(v_ueA);
f_mtc_userAnswerCall(v_psap);
f_mtc_userCheckCallEstablished(v_ueA); // Event 1
f_mtc_userCheckCallEstablished(v_psap); // Event 1
f_mtc_check_precond_TD_VoLTE_ECO_INT_REL_01_03();
// Test body
//f_mtc_userInitiateCall (v_ueA, v_userTelInfoB);
f_mtc_check_TP_GM_PCSCF_ECO_BYE_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 2
f_mtc_check_TP_MW_PCSCF_ECO_BYE_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 3
f_mtc_check_TP_MW_IBCF_ECO_BYE_01(vc_vxlte_monitor_components.mwEB, -, v_sip); // Event 7
//Rx/Gx exchange after BYE was received at P-CSCF
f_mtc_check_TP_RX_PCSCF_STR_01(vc_vxlte_monitor_components.rx); // (STR – Event 10
f_mtc_check_TP_GX_PCRF_RAR_02(vc_vxlte_monitor_components.gx, true); // (RAR – Event 11)
f_mtc_check_TP_GX_PGW_RAA_03(vc_vxlte_monitor_components.gx); // (RAA – Event 12)
f_mtc_check_TP_RX_PCRF_STA_01(vc_vxlte_monitor_components.rx); // (STA – Event 13)
f_mtc_check_TP_MW_IBCF_ECO_200OK_01(vc_vxlte_monitor_components.mwEB, -, v_sip); // Event 17
f_mtc_check_TP_MW_PCSCF_ECO_200OK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 20
f_mtc_check_TP_GM_PCSCF_200OK_02(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 21
f_mtc_userCheckCallTerminated(v_ueA); // Event 22
f_mtc_userCheckCallCancelled(v_psap); // Event 23
// Postamble
f_PO_user_home_deregistration(v_ueA);
f_PO_user_home_deregistration(v_psap);
//unmap/disconnect component ports
f_cf_user_down ( v_psap );
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
f_cf_adapter_down ( );
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
}
f_cf_adapter_down ( );
} // End of TC TD_VoLTE_ECO_INT_REL_01_03
group f_TD_VoLTE_ECO_INT_REL_01_03 {
function f_mtc_check_precond_TD_VoLTE_ECO_INT_REL_01_03() runs on ImsTestCoordinator {
log("If the test case fails, please check the preconditions");
// TODO Add real code to check pre-conditions
} // End of function f_mtc_check_precond_TD_VoLTE_ECO_INT_REL_01_03
} // End of group f_TD_VoLTE_ECO_INT_REL_01_03
/**
* @desc To perform originating PSAP session release and the tear down of related dedicated bearers.
* @see ETSI TS 103 795-2 Clause 5.3.3.2 PSAP Initiated Emergency Session Release
* @remark This is option 1: PSAP is in IMS A network
*/
testcase TD_VoLTE_ECO_INT_REL_02_01() runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A_emergency );
var IotEquipmentUser v_psap := f_cf_create_IotEquipmentUser ( c_psap );
var ImsUserInfo v_userInfoA := f_getImUser ( PX_EUT_A_EMERGENCY );
var ImsUserInfo v_infoPsap := f_getImUser ( PX_PSAP );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_SIP_GMA_INTERFACENAME,
PX_DIAMETER_GX_INTERFACENAME,
PX_DIAMETER_RX_INTERFACENAME,
PX_SIP_MW_PE_INTERFACENAME,
PX_SIP_EB_INTERFACENAME, // E-CSCF -> IBCF
PX_SIP_MM_PSAP_INTERFACENAME // E-CSCCF -> PSAP
}))
{
var SipMessage v_sip;
f_cf_createVxLteMonitor();
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_user_up ( v_psap );
f_cf_VxLteMonitor_Up();
// Preamble
f_mtc_userRegistration(v_ueA, v_userInfoA);
f_mtc_userRegistration(v_psap, v_infoPsap);
f_mtc_userInitiateCall (v_ueA, v_infoPsap);
f_mtc_userCheckRinging(v_psap);
f_mtc_userCheckPeerIsRinging(v_ueA);
f_mtc_userAnswerCall(v_psap);
f_mtc_userCheckCallEstablished(v_ueA); // Event 1
f_mtc_userCheckCallEstablished(v_psap); // Event 1
f_mtc_check_precond_TD_VoLTE_ECO_INT_REL_02_01();
// Test body
//f_mtc_userInitiateCall (v_ueA, v_userTelInfoB);
// TODO
f_mtc_userCheckCallTerminated(v_ueA); // Event 21
f_mtc_userCheckCallCancelled(v_psap); // Event 20
// Postamble
f_PO_user_home_deregistration(v_ueA);
f_PO_user_home_deregistration(v_psap);
//unmap/disconnect component ports
f_cf_user_down ( v_psap );
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
f_cf_adapter_down ( );
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
}
f_cf_adapter_down ( );
} // End of TC TD_VoLTE_ECO_INT_REL_02_01
group f_TD_VoLTE_ECO_INT_REL_02_01 {
function f_mtc_check_precond_TD_VoLTE_ECO_INT_REL_02_01() runs on ImsTestCoordinator {
log("If the test case fails, please check the preconditions");
// TODO Add real code to check pre-conditions
} // End of function f_mtc_check_precond_TD_VoLTE_ECO_INT_REL_02_01
} // End of group f_TD_VoLTE_ECO_INT_REL_02_01
/**
* @desc To perform originating PSAP session release and the tear down of related dedicated bearers.
* @see ETSI TS 103 795-2 Clause 5.3.3.2 PSAP Initiated Emergency Session Release
* @remark This is option2: PSAP is not in IMS A network
*/
testcase TD_VoLTE_ECO_INT_REL_02_02() runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A_emergency );
var IotEquipmentUser v_psap := f_cf_create_IotEquipmentUser ( c_psap );
var ImsUserInfo v_userInfoA := f_getImUser ( PX_EUT_A_EMERGENCY );
var ImsUserInfo v_infoPsap := f_getImUser ( PX_PSAP );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_SIP_GMA_INTERFACENAME,
PX_DIAMETER_GX_INTERFACENAME,
PX_DIAMETER_RX_INTERFACENAME,
PX_SIP_MW_PE_INTERFACENAME,
PX_SIP_IC_INTERFACENAME // IBCF -> IMS
}))
{
var SipMessage v_sip;
f_cf_createVxLteMonitor();
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_user_up ( v_psap );
f_cf_VxLteMonitor_Up();
// Preamble
f_mtc_userRegistration(v_ueA, v_userInfoA);
f_mtc_userRegistration(v_psap, v_infoPsap);
f_mtc_userInitiateCall (v_ueA, v_infoPsap);
f_mtc_userCheckRinging(v_psap);
f_mtc_userCheckPeerIsRinging(v_ueA);
f_mtc_userAnswerCall(v_psap);
f_mtc_userCheckCallEstablished(v_ueA); // Event 1
f_mtc_userCheckCallEstablished(v_psap); // Event 1
f_mtc_check_precond_TD_VoLTE_ECO_INT_REL_02_02();
// Test body
//f_mtc_userInitiateCall (v_ueA, v_userTelInfoB);
// TODO
f_mtc_userCheckCallTerminated(v_ueA); // Event 21
f_mtc_userCheckCallCancelled(v_psap); // Event 20
// Postamble
f_PO_user_home_deregistration(v_ueA);
f_PO_user_home_deregistration(v_psap);
//unmap/disconnect component ports
f_cf_user_down ( v_psap );
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
f_cf_adapter_down ( );
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
}
f_cf_adapter_down ( );
} // End of TC TD_VoLTE_ECO_INT_REL_02_02
group f_TD_VoLTE_ECO_INT_REL_02_02 {
function f_mtc_check_precond_TD_VoLTE_ECO_INT_REL_02_02() runs on ImsTestCoordinator {
log("If the test case fails, please check the preconditions");
// TODO Add real code to check pre-conditions
} // End of function f_mtc_check_precond_TD_VoLTE_ECO_INT_REL_02_02
} // End of group f_TD_VoLTE_ECO_INT_REL_02_02
/**
* @desc To perform originating PSAP session release and the tear down of related dedicated bearers.