Newer
Older
group f_TD_VoLTE_ECO_INT_INI_05 {
function f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_05() runs on ImsTestCoordinator {
log("If the test case fails, please check the preconditions");
// TODO Add real code to check pre-conditions
} // End of function f_mtc_check_precond_TD_VoLTE_ECO_INT_INI_05
} // End of group f_TD_VoLTE_ECO_INT_INI_05
} // End of group EmergencySessionEstablishment
group EmergencySessionRelease {
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
/**
* @desc To perform originating UE session release and the tear down of related dedicated bearers.
* On call release, the P-CSCF A should trigger the removal of all relevant previously created bearers
* @see ETSI TS 103 795-2 Clause 5.3.3.1 UE Initiated Emergency Session Release
* @remark This is option1: IBCF is connected to the PSAP, the interface IBCF and the PSAP is the Mm interface
*/
testcase TD_VoLTE_ECO_INT_REL_01_01() runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A_emergency );
var IotEquipmentUser v_psap := f_cf_create_IotEquipmentUser ( c_psap );
var ImsUserInfo v_userInfoA := f_getImUser ( PX_EUT_A_EMERGENCY );
var ImsUserInfo v_infoPsap := f_getImUser ( PX_PSAP );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_SIP_GMA_INTERFACENAME,
PX_DIAMETER_GX_INTERFACENAME,
PX_DIAMETER_RX_INTERFACENAME,
PX_SIP_MW_PE_INTERFACENAME,
PX_SIP_EB_INTERFACENAME, // E-CSCF -> IBCF
PX_SIP_MM_PSAP_INTERFACENAME // IBCF -> PSAP
}))
{
var SipMessage v_sip;
f_cf_createVxLteMonitor();
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_user_up ( v_psap );
f_cf_VxLteMonitor_Up();
// Preamble
f_mtc_userRegistration(v_ueA, v_userInfoA);
f_mtc_userRegistration(v_psap, v_infoPsap);
f_mtc_userInitiateCall (v_ueA, v_infoPsap);
f_mtc_userCheckRinging(v_psap);
f_mtc_userCheckPeerIsRinging(v_ueA);
f_mtc_userAnswerCall(v_psap);
f_mtc_userCheckCallEstablished(v_ueA); // Event 1
f_mtc_userCheckCallEstablished(v_psap); // Event 1
f_mtc_check_precond_TD_VoLTE_ECO_INT_REL_01_01();
// Test body
//f_mtc_userInitiateCall (v_ueA, v_userTelInfoB);
f_mtc_check_TP_GM_PCSCF_BYE_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 2
f_mtc_check_TP_MW_ECSCF_BYE_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 3
f_mtc_check_TP_MW_IBCF_BYE_01(vc_vxlte_monitor_components.mwBE, -, v_sip); // Event 3
f_mtc_check_TP_MM_PSAP_BYE_01(vc_vxlte_monitor_components.mwB_PSAP); // Event 6
//Rx/Gx exchange after BYE was received at P-CSCF
f_mtc_check_TP_RX_PCSCF_STR_01(vc_vxlte_monitor_components.rx); // (STR – Event 10
f_mtc_check_TP_GX_PCRF_RAR_02(vc_vxlte_monitor_components.gx, true); // (RAR – Event 11)
f_mtc_check_TP_GX_PGW_RAA_03(vc_vxlte_monitor_components.gx); // (RAA – Event 12)
f_mtc_check_TP_RX_PCRF_STA_01(vc_vxlte_monitor_components.rx); // (STA – Event 13)
f_mtc_check_TP_MW_IBCF_200OK_01(vc_vxlte_monitor_components.mwBE, -, v_sip); // Event 15
f_mtc_check_TP_MW_ECSCF_200OK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 20
f_mtc_check_TP_GM_PCSCF_200OK_02(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 21
f_mtc_userCheckCallTerminated(v_ueA); // Event 22
f_mtc_userCheckCallCancelled(v_ueB); // Event 23
// Postamble
f_PO_user_home_deregistration(v_ueA);
f_PO_user_home_deregistration(v_ueB);
//unmap/disconnect component ports
f_cf_user_down ( v_ueB );
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
f_cf_adapter_down ( );
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
}
f_cf_adapter_down ( );
} // End of TC TD_VoLTE_ECO_INT_REL_01_01
group f_TD_VoLTE_ECO_INT_REL_01_01 {
function f_mtc_check_precond_TD_VoLTE_ECO_INT_REL_01_01() runs on ImsTestCoordinator {
log("If the test case fails, please check the preconditions");
// TODO Add real code to check pre-conditions
} // End of function f_mtc_check_precond_TD_VoLTE_ECO_INT_REL_01_01
} // End of group f_TD_VoLTE_ECO_INT_REL_01_01
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
/**
* @desc To perform originating UE session release and the tear down of related dedicated bearers.
* On call release, the P-CSCF A should trigger the removal of all relevant previously created bearers
* @see ETSI TS 103 795-2 Clause 5.3.3.1 UE Initiated Emergency Session Release
* @remark This is option2: IBCF is connected to another IMS network and the interface between the IBCF and the PSAP is the Ic interface
*/
testcase TD_VoLTE_ECO_INT_REL_01_02 ( ) runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A_emergency );
var IotEquipmentUser v_psap := f_cf_create_IotEquipmentUser ( c_psap );
var ImsUserInfo v_userInfoA := f_getImUser ( PX_EUT_A_EMERGENCY );
var ImsUserInfo v_infoPsap := f_getImUser ( PX_PSAP );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_SIP_GMA_INTERFACENAME,
PX_DIAMETER_GX_INTERFACENAME,
PX_DIAMETER_RX_INTERFACENAME,
PX_SIP_MW_PE_INTERFACENAME,
PX_SIP_EB_INTERFACENAME, // E-CSCF -> IBCF
PX_SIP_IC_INTERFACENAME // IBCF -> IMS_B -> PSAP
}))
{
var SipMessage v_sip;
f_cf_createVxLteMonitor();
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_user_up ( v_psap );
f_cf_VxLteMonitor_Up();
// Preamble
f_mtc_userRegistration(v_ueA, v_userInfoA);
f_mtc_userRegistration(v_psap, v_infoPsap);
f_mtc_userInitiateCall (v_ueA, v_infoPsap);
f_mtc_userCheckRinging(v_psap);
f_mtc_userCheckPeerIsRinging(v_ueA);
f_mtc_userAnswerCall(v_psap);
f_mtc_userCheckCallEstablished(v_ueA); // Event 1
f_mtc_userCheckCallEstablished(v_psap); // Event 1
f_mtc_check_precond_TD_VoLTE_ECO_INT_REL_01_02();
// Test body
//f_mtc_userInitiateCall (v_ueA, v_userTelInfoB);
f_mtc_check_TP_GM_PCSCF_BYE_01(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 2
f_mtc_check_TP_MW_ECSCF_BYE_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 3
f_mtc_check_TP_MW_IBCF_BYE_01(vc_vxlte_monitor_components.mwBE, -, v_sip); // Event 3
f_mtc_check_TP_IC_IBCF_BYE_01(vc_vxlte_monitor_components.ic); // Event 6
//Rx/Gx exchange after BYE was received at P-CSCF
f_mtc_check_TP_RX_PCSCF_STR_01(vc_vxlte_monitor_components.rx); // (STR – Event 10
f_mtc_check_TP_GX_PCRF_RAR_02(vc_vxlte_monitor_components.gx, true); // (RAR – Event 11)
f_mtc_check_TP_GX_PGW_RAA_03(vc_vxlte_monitor_components.gx); // (RAA – Event 12)
f_mtc_check_TP_RX_PCRF_STA_01(vc_vxlte_monitor_components.rx); // (STA – Event 13)
f_mtc_check_TP_MW_IBCF_200OK_01(vc_vxlte_monitor_components.mwBE, -, v_sip); // Event 15
f_mtc_check_TP_MW_ECSCF_200OK_01(vc_vxlte_monitor_components.mwPE, -, v_sip); // Event 20
f_mtc_check_TP_GM_PCSCF_200OK_02(vc_vxlte_monitor_components.gmA, -, v_sip); // Event 21
f_mtc_userCheckCallTerminated(v_ueA); // Event 22
f_mtc_userCheckCallCancelled(v_ueB); // Event 23
// Postamble
f_PO_user_home_deregistration(v_ueA);
f_PO_user_home_deregistration(v_ueB);
//unmap/disconnect component ports
f_cf_user_down ( v_ueB );
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
f_cf_adapter_down ( );
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
}
f_cf_adapter_down ( );
} // End of TC TD_VoLTE_ECO_INT_REL_01_02
group f_TD_VoLTE_ECO_INT_REL_01_02 {
function f_mtc_check_precond_TD_VoLTE_ECO_INT_REL_01_01() runs on ImsTestCoordinator {
log("If the test case fails, please check the preconditions");
} // End of function f_mtc_check_precond_TD_VoLTE_ECO_INT_REL_01_02
} // End of f_TD_VoLTE_ECO_INT_REL_01_02
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
/**
* @desc To perform originating UE session release and the tear down of related dedicated bearers.
* On call release, the P-CSCF A should trigger the removal of all relevant previously created bearers
* @see ETSI TS 103 795-2 Clause 5.3.3.1 UE Initiated Emergency Session Release
* @remark This is option3: IBCF is connected to the PSTN network
*/
testcase TD_VoLTE_ECO_INT_REL_01_03() runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A_emergency );
var IotEquipmentUser v_psap := f_cf_create_IotEquipmentUser ( c_psap );
var ImsUserInfo v_userInfoA := f_getImUser ( PX_EUT_A_EMERGENCY );
var ImsUserInfo v_infoPsap := f_getImUser ( PX_PSAP );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_SIP_GMA_INTERFACENAME,
PX_DIAMETER_GX_INTERFACENAME,
PX_DIAMETER_RX_INTERFACENAME,
PX_SIP_MW_PE_INTERFACENAME,
PX_SIP_EB_INTERFACENAME, // E-CSCF -> IBCF
PX_SIP_PSTN_INTERFACENAME // IBCF -> PSTN -> PSAP
}))
{
var SipMessage v_sip;
f_cf_createVxLteMonitor();
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_user_up ( v_psap );
f_cf_VxLteMonitor_Up();
// Preamble
f_mtc_userRegistration(v_ueA, v_userInfoA);
f_mtc_userRegistration(v_psap, v_infoPsap);
f_mtc_userInitiateCall (v_ueA, v_infoPsap);
f_mtc_userCheckRinging(v_psap);
f_mtc_userCheckPeerIsRinging(v_ueA);
f_mtc_userAnswerCall(v_psap);
f_mtc_userCheckCallEstablished(v_ueA); // Event 1
f_mtc_userCheckCallEstablished(v_psap); // Event 1
f_mtc_check_precond_TD_VoLTE_ECO_INT_REL_01_03();
// Test body
//f_mtc_userInitiateCall (v_ueA, v_userTelInfoB);
// TODO
f_mtc_userCheckCallTerminated(v_ueA); // Event 22
f_mtc_userCheckCallCancelled(v_ueB); // Event 23
// Postamble
f_PO_user_home_deregistration(v_ueA);
f_PO_user_home_deregistration(v_ueB);
//unmap/disconnect component ports
f_cf_user_down ( v_ueB );
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
f_cf_adapter_down ( );
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
}
f_cf_adapter_down ( );
} // End of TC TD_VoLTE_ECO_INT_REL_01_03
group f_TD_VoLTE_ECO_INT_REL_01_03 {
function f_mtc_check_precond_TD_VoLTE_ECO_INT_REL_01_03() runs on ImsTestCoordinator {
log("If the test case fails, please check the preconditions");
// TODO Add real code to check pre-conditions
} // End of function f_mtc_check_precond_TD_VoLTE_ECO_INT_REL_01_03
} // End of group f_TD_VoLTE_ECO_INT_REL_01_03
} // End of group EmergencySessionRelease
group EmergencySessionAbortOrReject {
} // End of group EmergencySessionAbortOrReject
} // End of group EmergencySessionEmergencyBearerOperations
/**
* @see ETSI TS 103 795-2 Clause 5.4 Emergency Deregistration
*/
group EmergencyNetworkDetachment {
group EmergencySessionDetachment {
/**
* @desc Emergency Network Detachment (with/without) emergency registration
*
* @see
*/
testcase TC_VoLTE_ECO_INT_DTC_01 ( ) runs on ImsTestCoordinator system IotSystemInterface {
var IotEquipmentUser v_ueA := f_cf_create_IotEquipmentUser ( c_userUE_A );
var ImsUserInfo v_userInfoA := f_getImUser ( PX_EUT_A );
f_setVxLteMonIterfacesAvailability();
//Check required monitor interfaces due to TD
if (f_checkVxLteRequiredMonitorInterface({PX_DIAMETER_GX_INTERFACENAME})){
f_cf_createVxLteMonitor();
// map/connect component ports
f_cf_adapter_up ( );
f_cf_user_up ( v_ueA );
f_cf_VxLteMonitor_Up();
//preamble
f_mtc_userRadioEnabled ( v_ueA, true, true ); // UA-A trigger an initial network_attachment by enabling radio interface of its mobile
f_mtc_userRadioEnabled ( v_ueA, false, true );
// test body
// Check that user A starts initial network attachment
f_mtc_check_TP_GX_PCRF_ECO_CCA_02 ( vc_vxlte_monitor_components.gx, false ); // Check (CCA – Event 3)
//postamble
//unmap/disconnect component ports
f_cf_user_down ( v_ueA );
f_cf_VxLteMonitor_Down();
f_cf_adapter_down ( );
}else{
//log...
setverdict (inconc,"At least one required monitor interface SHALL be selected! Check PIXITs")
}
} // End of TC TC_VoLTE_ECO_INT_DTC_01
} // End of group EmergencySessionDetachment
1327
1328
1329
1330
1331
1332
1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
1350
1351
1352
1353
} // End of group EmergencyNetworkDetachment
} // End of group Interoperability
/**
* @see ETSI TS 103 795-2 Clause 6 Test Descriptions (Roaming)
*/
group Roaming {
/**
* @see ETSI TS 103 795-2 6.1 Network Attachment
*/
group NetworkAttachment {
} // End of group NetworkAttachment
/**
* @see ETSI TS 103 795-2 Clause 6.2 IMS Emergency Registration in a visited network
*/
group IMSEmergencyRegistration {
} // End of group IMSEmergencyRegistration
} // End of group Roaming
} // End of module AtsImsIot_Emergency