End of validation week 23 (3d8e3848) · Commits · INT - Core Network and Interoperability Testing / DIAMETER / DiameterRx

DiameterRx/ttcn/DiameterRx_ImsGm_TCFunctions.ttcn

+36 −12

Original line number	Diff line number	Diff line
		@@ -33,6 +33,8 @@ module DiameterRx_ImsGm_TCFunctions {

		var template REGISTER_Request v_register;

		f_selfOrClientSyncAndVerdict(c_prDone, f_getVerdict());

		v_register :=
		valueof(m_REGISTER_Request_Base(vc_requestUri, vc_callId,
		p_cSeq_s, vc_from, vc_to,
		@@ -42,16 +44,14 @@ module DiameterRx_ImsGm_TCFunctions {
		// 200 OK and user profile setting
		f_IMS_preamble_withRegistration(c_userProfile_UE1atSUThome,
		p_cSeq_s, v_register);
		f_selfOrClientSyncAndVerdict(c_prDone, f_getVerdict()); // sync
		// point
		// preamble
		// done
		f_selfOrClientSyncAndVerdict(c_prDone, f_getVerdict()); // sync point preamble done

		// TESTBODY
		// prepare and send INVITE UE2
		// @SUT
		LibIms_Steps
		.f_setHeadersINVITE(p_cSeq_s, c_userProfile_UE2atSUThome);
		f_SendINVITE(m_INVITE_Request_UE(vc_requestUri, vc_callId,
		f_SendINVITE(m_INVITE_Request_UE_Diameter(vc_requestUri, vc_callId,
		p_cSeq_s, vc_from, vc_to,
		vc_via, vc_contact, omit,
		vc_route_REG, omit,
		@@ -93,6 +93,8 @@ module DiameterRx_ImsGm_TCFunctions {

		var template REGISTER_Request v_register;

		f_selfOrClientSyncAndVerdict(c_prDone, f_getVerdict());

		v_register :=
		valueof(m_REGISTER_Request_Base(vc_requestUri, vc_callId,
		p_cSeq_s, vc_from, vc_to,
		@@ -106,10 +108,8 @@ module DiameterRx_ImsGm_TCFunctions {
		f_IMS_preamble_withRegistration(c_userProfile_UE2atSUThome,
		p_cSeq_s, v_register);

		f_selfOrClientSyncAndVerdict(c_prDone, f_getVerdict()); // sync
		// point
		// preamble
		// done
		f_selfOrClientSyncAndVerdict(c_prDone, f_getVerdict()); // sync point preamble done

		// TESTBODY
		// Awaiting INVITE
		f_awaitingINVITE(mw_INVITE_Request_Base);
		@@ -173,7 +173,7 @@ module DiameterRx_ImsGm_TCFunctions {
		// @SUT
		LibIms_Steps
		.f_setHeadersINVITE(p_cSeq_s, c_userProfile_UE2atSUThome);
		f_SendINVITE(m_INVITE_Request_UE(vc_requestUri, vc_callId,
		f_SendINVITE(m_INVITE_Request_UE_Diameter(vc_requestUri, vc_callId,
		p_cSeq_s, vc_from, vc_to,
		vc_via, vc_contact, omit,
		vc_route_REG, omit,
		@@ -300,7 +300,7 @@ module DiameterRx_ImsGm_TCFunctions {
		// @SUT
		LibIms_Steps
		.f_setHeadersINVITE(p_cSeq_s, c_userProfile_UE2atSUThome);
		f_SendINVITE(m_INVITE_Request_UE(vc_requestUri, vc_callId,
		f_SendINVITE(m_INVITE_Request_UE_Diameter(vc_requestUri, vc_callId,
		p_cSeq_s, vc_from, vc_to,
		vc_via, vc_contact, omit,
		vc_route_REG, omit,
		@@ -322,7 +322,7 @@ module DiameterRx_ImsGm_TCFunctions {
		// Check function to set headers for reinvite on
		// originating side
		LibIms_Steps.f_setHeadersReINVITE(p_cSeq_s, true);
		f_SendINVITE(m_INVITE_Request_UE(vc_requestUri, vc_callId,
		f_SendINVITE(m_INVITE_Request_UE_Diameter(vc_requestUri, vc_callId,
		p_cSeq_s, vc_from, vc_to,
		vc_via, vc_contact, omit,
		vc_route, omit,
		@@ -428,4 +428,28 @@ module DiameterRx_ImsGm_TCFunctions {

		} //end group TP_TargetRefresh

		group IMSTemplates {



		template INVITE_Request m_INVITE_Request_UE_Diameter
		(SipUrl p_requestUri, CallId p_callId, CSeq p_cSeq, From p_from, To p_to,
		Via p_via, Contact p_contact, template Require p_require,
		template Route p_route, template Supported p_supported, template MessageBody p_mb )
		modifies m_INVITE_Request_Base
		:=
		{
		msgHeader :=
		{
		contentLength := {fieldName := CONTENT_LENGTH_E, len:= f_MessageBodyLength(valueof(p_mb))},
		contentType := {fieldName := CONTENT_TYPE_E, mediaType := c_sdpAplication},
		require := p_require,
		route := p_route,
		supported := p_supported
		},
		messageBody := p_mb
		}

		}

		} // end module DiameterRx_ImsGm_TCFunctions
		No newline at end of file

DiameterRx/ttcn/DiameterRx_PIXITS.ttcn

+41 −4

Original line number	Diff line number	Diff line
		@@ -43,7 +43,7 @@ module DiameterRx_PIXITS

		/** @desc octetstring , PIXIT item A-1/7
		(This is an operator option, not a protocol option),
		UE IP address:
		UE1 IP address:

		The Framed-IP-Address AVP (AVP Code 8) [RADIUS] is of type
		OctetString and contains an IPv4 address of the type specified in the
		@@ -61,11 +61,48 @@ module DiameterRx_PIXITS

		Ref: TS 129 214 5-4, table 5-4-1
		*/
		modulepar octetstring PX_UE_framedIpAddress := 'ffffffff'O;
		modulepar octetstring PX_UE1_framedIpAddress := 'ffffffff'O;

		/** @desc octetstring , PIXIT item A-1/7
		(This is an operator option, not a protocol option),
		UE2 IP address:

		The Framed-IP-Address AVP (AVP Code 8) [RADIUS] is of type
		OctetString and contains an IPv4 address of the type specified in the
		attribute value to be configured for the user; It MAY be used in an
		authorization request as a hint to the server that a specific address
		is desired, but the server is not required to honor the hint in the
		corresponding response;

		Two values have special significance: 0xFFFFFFFF and 0xFFFFFFFE; The
		value 0xFFFFFFFF indicates that the NAS should allow the user to
		select an address (i.e., negotiated); The value 0xFFFFFFFE indicates
		that the NAS should select an address for the user (eg, assigned
		from a pool of addresses kept by the NAS);


		Ref: TS 129 214 5-4, table 5-4-1
		*/
		modulepar octetstring PX_UE2_framedIpAddress := 'ffffffff'O;

		/** @desc octetstring, PIXIT item A-1/8
		(This is an operator option, not a protocol option),
		UE1 IP6 address:

		The Framed-IPv6-Prefix AVP (AVP Code 97) is of type OctetString and
		contains the IPv6 prefix to be configured for the user; One or more
		AVPs MAY be used in authorization requests as a hint to the server
		that specific IPv6 prefixes are desired, but the server is not
		required to honor the hint in the corresponding response;


		Ref: TS 129 214 5-4, table 5-4-1
		*/
		modulepar octetstring PX_UE1_framedIp6Address := 'ffffffff'O;

		/** @desc octetstring, PIXIT item A-1/8
		(This is an operator option, not a protocol option),
		UE IP6 address:
		UE2 IP6 address:

		The Framed-IPv6-Prefix AVP (AVP Code 97) is of type OctetString and
		contains the IPv6 prefix to be configured for the user; One or more
		@@ -76,7 +113,7 @@ module DiameterRx_PIXITS

		Ref: TS 129 214 5-4, table 5-4-1
		*/
		modulepar octetstring PX_UE_framedIp6Address := 'ffffffff'O;
		modulepar octetstring PX_UE2_framedIp6Address := 'ffffffff'O;

DiameterRx/ttcn/DiameterRx_Rx_TCFunctions.ttcn

+697 −432

File changed.

Preview size limit exceeded, changes collapsed.

DiameterRx/ttcn/DiameterRx_Steps.ttcn3

+83 −11

Original line number	Diff line number	Diff line
		@@ -80,14 +80,14 @@
		* @desc This is a test step that initiate session establishment by the ETS
		* @param
		*/
		function f_ETS_session_establishment()
		function f_ETS_session_establishment(template Framed_IP_Address_AVP p_framedIpAddress4, template Framed_IPv6_Prefix_AVP p_framedIpAddress6)
		runs on DiameterComponent {
		f_send_AAR(m_AAR_FIP_Media1(vc_sessionId, vc_originHost,
		vc_originRealm,
		vc_destinationRealm,
		vc_destinationHost,
		f_framedIpAddress4_send(),
		f_framedIpAddress6_send(),
		p_framedIpAddress4,
		p_framedIpAddress6,
		m_mediaComponentDescription_flowStatus(m_flowStatus(ENABLED_E))));

		f_awaiting_AAA(mw_AAA_modified_ResultCode_ANCA(?, ?, ?,
		@@ -128,36 +128,108 @@

		group AVPOperations {

		function f_framedIpAddress4 ()
		function f_framedIpAddress4 (template octetstring p_framedIpAddress)
		return template Framed_IP_Address_AVP
		{
		if (PX_IPv6)
		{return(omit)}
		else {return(mw_framedIpAddress(PX_UE_framedIpAddress))}
		else {return(mw_framedIpAddress(p_framedIpAddress))}
		}
		function f_framedIpAddress6 ()

		function f_framedIpAddress6 (template octetstring p_framedIpAddress)
		return template Framed_IPv6_Prefix_AVP
		{
		if (PX_IPv6)
		{return(mw_framedIp6Address(PX_UE_framedIp6Address))}
		{return(mw_framedIp6Address(p_framedIpAddress))}
		else {return(omit)}
		}

		function f_framedIpAddress4_send ()
		function f_framedIpAddress4_send (octetstring p_framedIpAddress)
		return template Framed_IP_Address_AVP
		{
		if (PX_IPv6)
		{return(omit)}
		else {return(m_framedIpAddress(PX_UE_framedIpAddress))}
		else {return(m_framedIpAddress(p_framedIpAddress))}
		}

		function f_framedIpAddress6_send ()
		function f_framedIpAddress6_send (octetstring p_framedIpAddress)
		return template Framed_IPv6_Prefix_AVP
		{
		if (PX_IPv6)
		{return(m_framedIp6Address(PX_UE_framedIp6Address))}
		{return(m_framedIp6Address(p_framedIpAddress))}
		else {return(omit)}
		}
		}//end group AVPOperations

		group twoSessionRelatedFunctions{


		function f_awaitAAR_sendAAAandSaveSessionIds() runs on DiameterComponent
		{
		var DIAMETER_MSG v_MSG;

		if (PX_DIAM_LLP_ENABLED and f_gtZero(vc_ETS_conn))
		{
		tc_wait.start(2.0);
		interleave
		{
		[]DIAMP.receive (DIAMETER_MSG:{aAR_MSG:=mw_AAR_basic(?,?,?,?,*)}) -> value v_MSG
		{
		tc_wait.stop;
		vc_recvDiamMsg := v_MSG;
		// store specific parameter for AAR if needed
		vc_recv_hopid:= vc_recvDiamMsg.aAR_MSG.header.hopid;
		vc_recv_endid:= vc_recvDiamMsg.aAR_MSG.header.endid;
		vc_sessionId := vc_recvDiamMsg.aAR_MSG.session_Id;
		//TODO store session1
		f_send_AAA(m_AAA_basic(vc_sessionId, vc_originHost, vc_originRealm));
		}

		[]DIAMP.receive (DIAMETER_MSG:{aAR_MSG:=mw_AAR_basic(?,?,?,?,*)}) -> value v_MSG
		{
		tc_wait.stop;
		vc_recvDiamMsg := v_MSG;
		// store specific parameter for AAR if needed
		vc_recv_hopid:= vc_recvDiamMsg.aAR_MSG.header.hopid;
		vc_recv_endid:= vc_recvDiamMsg.aAR_MSG.header.endid;
		vc_sessionId := vc_recvDiamMsg.aAR_MSG.session_Id;
		//TODO store session2
		f_send_AAA(m_AAA_basic(vc_sessionId, vc_originHost, vc_originRealm));
		}
		}
		}
		else
		{
		tc_wait.start;
		interleave
		{
		[]DIAMP.receive (DIAMETER_MSG:{aAR_MSG:=mw_AAR_basic(?,?,?,?,*)}) -> value v_MSG
		{
		tc_wait.stop;
		vc_recvDiamMsg := v_MSG;
		// store specific parameter for AAR if needed
		vc_recv_hopid:= vc_recvDiamMsg.aAR_MSG.header.hopid;
		vc_recv_endid:= vc_recvDiamMsg.aAR_MSG.header.endid;
		vc_sessionId := vc_recvDiamMsg.aAR_MSG.session_Id;
		//TODO store session1
		f_send_AAA(m_AAA_basic(vc_sessionId, vc_originHost, vc_originRealm));
		}

		[]DIAMP.receive (DIAMETER_MSG:{aAR_MSG:=mw_AAR_basic(?,?,?,?,*)}) -> value v_MSG
		{
		tc_wait.stop;
		vc_recvDiamMsg := v_MSG;
		// store specific parameter for AAR if needed
		vc_recv_hopid:= vc_recvDiamMsg.aAR_MSG.header.hopid;
		vc_recv_endid:= vc_recvDiamMsg.aAR_MSG.header.endid;
		vc_sessionId := vc_recvDiamMsg.aAR_MSG.session_Id;
		//TODO store session2
		f_send_AAA(m_AAA_basic(vc_sessionId, vc_originHost, vc_originRealm));
		}
		}
		}
		} //end function f_awaitAAR_sendAAAandSaveSessionIds()

		} //end group twoSessionRelatedFunctions

		} // end module DiameterRx_Steps
		No newline at end of file

DiameterRx/ttcn/DiameterRx_Templates.ttcn

+2 −1

Original line number	Diff line number	Diff line
		@@ -672,7 +672,8 @@ module DiameterRx_Templates {
		session_Id := p_sessionId,
		origin_Host := p_originHost,
		origin_Realm := p_originRealm,
		auth_Application_Id := m_authApplicationId(c_applIdRx)
		auth_Application_Id := m_authApplicationId(c_applIdRx),
		result_Code := m_resultCode(m_resultCode_diameterSuccess)
		}

		template ASA_MSG m_ASA_basic(template (value) Session_Id_AVP p_sessionId,