Authentication_parameter_RAND indicating value RV_Authentication_parameter_RAND,
Authentication_parameter_AUTN indicating value RV_Authentication_parameter_AUTN;;
to the GNB entity
}
}
@@ -165,7 +166,7 @@ Package TP_AMF {
Test objective "Verify that the IUT sends an IDENTITY_REQUEST message correctly upon receipt of an AUTHENTICATION_FAILURE message indicating a 5GMM cause value #20 - MAC failure."
Reference
"ETSI TS 124 501 [1], Clauses 5.4.1.3.7 c) and 8.2.4"
extended_protocol_discriminator set to 5GS_MOBILITY_MANAGEMENT_MESSAGES,
security_header_type set to NOT_SECURITY_PROTECTED,
spare_half_octet,
message_type set to AUTHENTICATION_REQUEST,
ngKSI containing
nas_key_set_identifier set to "111";, //value for nas_key_set_identifier was already used before
spare_half_octet,
ABBA,
Authentication_parameter_RAND,
Authentication_parameter_AUTN;;
ABBA containing
ABBA_contents set to '0000'H;,
Authentication_parameter_RAND indicating value RV_Authentication_parameter_RAND,
Authentication_parameter_AUTN indicating value RV_Authentication_parameter_AUTN;;
to the GNB entity
}
@@ -251,14 +251,13 @@ Package TP_AMF {
NAS_PDU containing
extended_protocol_discriminator set to 5GS_MOBILITY_MANAGEMENT_MESSAGES,
security_header_type set to NOT_SECURITY_PROTECTED,
spare_half_octet,
message_type set to AUTHENTICATION_REQUEST,
ngKSI containing
nas_key_set_identifier indicating value PX_NON_DEFAULT_NGKSI;,
spare_half_octet,
ABBA,
Authentication_parameter_RAND,
Authentication_parameter_AUTN;;
ABBA containing
ABBA_contents set to '0000'H;,
Authentication_parameter_RAND indicating value RV_Authentication_parameter_RAND,
Authentication_parameter_AUTN indicating value RV_Authentication_parameter_AUTN;;
to the GNB entity
}
}
@@ -270,14 +269,14 @@ Package TP_AMF {
TP Id TP_5GNAS_AMF_AUT_ABN_01
Test objective "Verify that the IUT sends a new IDENTITY_REQUEST message to obtain the SUCI from the UE upon receipt of an AUTHENTICATION_FAILURE message indicating a 5GMM cause value #26 - non-5G authentication unacceptable."
Test objective "Verify that the IUT sends an IDENTITY_REQUEST message to obtain the SUCI from the UE upon receipt of an AUTHENTICATION_FAILURE message indicating a 5GMM cause value #26 - non-5G authentication unacceptable."
extended_protocol_discriminator set to 5GS_MOBILITY_MANAGEMENT_MESSAGES,
security_header_type set to NOT_SECURITY_PROTECTED,
spare_half_octet,
message_type set to AUTHENTICATION_REQUEST,
ngKSI containing
nas_key_set_identifier set to "111";,
spare_half_octet,
ABBA,
Authentication_parameter_RAND,
Authentication_parameter_AUTN;; //the "separation bit" in the AMF field of AUTN is set to 0
ABBA containing
ABBA_contents set to '0000'H;,
Authentication_parameter_RAND indicating value RV_Authentication_parameter_RAND,
Authentication_parameter_AUTN set to PX_Authentication_parameter_AUTN_NON_5G_UNACCEPTABLE;; //the "separation bit" in the AMF field of AUTN is set to 0
to the GNB entity
}
@@ -312,9 +310,8 @@ Package TP_AMF {
NAS_PDU containing
extended_protocol_discriminator set to 5GS_MOBILITY_MANAGEMENT_MESSAGES,
security_header_type set to NOT_SECURITY_PROTECTED,
spare_half_octet,
message_type set to IDENTITY_REQUEST,
5GS_identity_type_IEI set to "SUCI";;
identity_type set to SUCI;;
to the GNB entity
}
}
@@ -330,16 +327,16 @@ Package TP_AMF {
Test Purpose {
TP Id TP_NGNAS_AMF_AUT_SEQ_01
TP Id TP_5GNAS_AMF_AUT_SEQ_01
Test objective "Verify that the IUT sends a SECURITY_MODE_COMMAND message correctly to indicate NAS security mode procedure upon receipt of a NAS AUTHENTICATION_RESPONSE."
Test objective "Verify that the IUT sends a SECURITY_MODE_COMMAND message to initiate the NAS security mode control procedure upon receipt of an AUTHENTICATION_RESPONSE message in a 5G AKA based primary authentication procedure."
Reference
"ETSI TS 124 501 [1], Clauses 5.4.2.2, 5.4.2.3 and 8.2.25"
Config Id CF_AMF_N2N1
PICS Selection NONE
PICS Selection PICS_A4/2_1
Initial conditions with {
the UE entity isNotRegisteredToAMF and
@@ -365,14 +362,16 @@ Package TP_AMF {
extended_protocol_discriminator set to 5GS_MOBILITY_MANAGEMENT_MESSAGES, //reference ts_124007v180200p: Table 11.2.3.1.1A.1: EPD values
security_header_type set to INTEGRITY_PROTECTED_WITH_NEW_5G_NAS_SECURITY_CONTEXT,
message_type set to SECURITY_MODE_COMMAND,
selected_NAS_security_algorithms,
selected_NAS_security_algorithms containing
type_of_ciphering_algorithm indicating value PX_SELECTED_NAS_CIPHERING_ALGORITHM,
type_of_integrity_algorithm indicating value PX_SELECTED_NAS_INTEGRITY_ALGORITHM;,