Run multiple Sidekiq processes (FREE SELF)

GitLab allows you to start multiple Sidekiq processes. These processes can be used to consume a dedicated set of queues. This can be used to ensure certain queues always have dedicated workers, no matter the number of jobs that need to be processed.

NOTE: The information in this page applies only to Omnibus GitLab.

Available Sidekiq queues

For a list of the existing Sidekiq queues, check the following files:

Each entry in the above files represents a queue on which Sidekiq processes can be started.

Start multiple processes

To start multiple processes:

  1. Using the sidekiq['queue_groups'] array setting, specify how many processes to create using sidekiq-cluster and which queue they should handle. Each item in the array equates to one additional Sidekiq process, and values in each item determine the queues it works on.

    For example, the following setting creates three Sidekiq processes, one to run on elastic_commit_indexer, one to run on mailers, and one process running on all queues:

    sidekiq['queue_groups'] = [

    To have an additional Sidekiq process handle multiple queues, add multiple queue names to its item delimited by commas. For example:

    sidekiq['queue_groups'] = [
      "elastic_commit_indexer, elastic_association_indexer",

    In GitLab 12.9 and later, the special queue name * means all queues. This starts two processes, each handling all queues:

    sidekiq['queue_groups'] = [

    * cannot be combined with concrete queue names - *, mailers just handles the mailers queue.

    When sidekiq-cluster is only running on a single node, make sure that at least one process is running on all queues using *. This ensures a process automatically picks up jobs in queues created in the future, including queues that have dedicated processes.

    If sidekiq-cluster is running on more than one node, you can also use --negate and list all the queues that are already being processed.

  2. Save the file and reconfigure GitLab for the changes to take effect:

    sudo gitlab-ctl reconfigure

To view the Sidekiq processes in GitLab:

  1. On the top bar, select Menu > {admin} Admin.
  2. On the left sidebar, select Monitoring > Background Jobs.

Negate settings

To have the additional Sidekiq processes work on every queue except the ones you list. In this example, we exclude all import-related jobs from a Sidekiq node:

  1. After you follow the steps for starting extra processes, edit /etc/gitlab/gitlab.rb and add:

    sidekiq['negate'] = true
    sidekiq['queue_groups'] = [
  2. Save the file and reconfigure GitLab for the changes to take effect:

    sudo gitlab-ctl reconfigure

Queue selector

In addition to selecting queues by name, as above, the queue_selector option allows queue groups to be selected in a more general way using a worker matching query. After queue_selector is set, all queue_groups must follow the aforementioned syntax.

In /etc/gitlab/gitlab.rb:

sidekiq['enable'] = true
sidekiq['queue_selector'] = true
sidekiq['queue_groups'] = [
  # Run all non-CPU-bound queues that are high urgency
  # Run all continuous integration and pages queues that are not high urgency
  # Run all queues

Disable Sidekiq cluster

WARNING: Sidekiq cluster is scheduled to be the only way to start Sidekiq in GitLab 14.0.

By default, the Sidekiq service runs sidekiq-cluster. To disable this behavior, add the following to the Sidekiq configuration:

sidekiq['enable'] = true
sidekiq['cluster'] = false

All of the aforementioned configuration options for sidekiq are available. By default, they are configured as follows:

sidekiq['queue_selector'] = false
sidekiq['interval'] = nil
sidekiq['max_concurrency'] = 50
sidekiq['min_concurrency'] = nil
sidekiq['negate'] = false
sidekiq['queue_groups'] = ['*']
sidekiq['shutdown_timeout'] = 25

sidekiq_cluster must be disabled if you decide to configure the cluster as above.

When disabling sidekiq_cluster, you must copy your configuration for sidekiq_clusterover to sidekiq. Anything configured for sidekiq_cluster is overridden by the options for sidekiq when setting sidekiq['cluster'] = true.

When using this feature, the service called sidekiq is now running sidekiq-cluster.

The concurrency and other options configured for Sidekiq are respected.

By default, logs for sidekiq-cluster go to /var/log/gitlab/sidekiq like regular Sidekiq logs.

Ignore all import queues

When importing from GitHub or other sources, Sidekiq might use all of its resources to perform those operations. To set up two separate sidekiq-cluster processes, where one only processes imports and the other processes all other queues:

  1. Edit /etc/gitlab/gitlab.rb and add:

    sidekiq['enable'] = true
    sidekiq['queue_selector'] = true
    sidekiq['queue_groups'] = [
  2. Save the file and reconfigure GitLab for the changes to take effect:

    sudo gitlab-ctl reconfigure

Number of threads

Each process defined under sidekiq starts with a number of threads that equals the number of queues, plus one spare thread. For example, a process that handles the process_commit and post_receive queues uses three threads in total.

Manage concurrency

When setting the maximum concurrency, keep in mind this normally should not exceed the number of CPU cores available. The values in the examples below are arbitrary and not particular recommendations.

Each thread requires a Redis connection, so adding threads may increase Redis latency and potentially cause client timeouts. See the Sidekiq documentation about Redis for more details.

When running Sidekiq cluster (default)

Running Sidekiq cluster is the default in GitLab 13.0 and later.

  1. Edit /etc/gitlab/gitlab.rb and add:

    sidekiq['min_concurrency'] = 15
    sidekiq['max_concurrency'] = 25
  2. Save the file and reconfigure GitLab for the changes to take effect:

    sudo gitlab-ctl reconfigure

min_concurrency and max_concurrency are independent; one can be set without the other. Setting min_concurrency to 0 disables the limit.

For each queue group, let N be one more than the number of queues. The concurrency factor are set to:

  1. N, if it's between min_concurrency and max_concurrency.
  2. max_concurrency, if N exceeds this value.
  3. min_concurrency, if N is less than this value.

If min_concurrency is equal to max_concurrency, then this value is used regardless of the number of queues.

When min_concurrency is greater than max_concurrency, it is treated as being equal to max_concurrency.

When running a single Sidekiq process

Running a single Sidekiq process is the default in GitLab 12.10 and earlier.

WARNING: Running Sidekiq directly is scheduled to be removed in GitLab 14.0.

  1. Edit /etc/gitlab/gitlab.rb and add:

    sidekiq['cluster'] = false
    sidekiq['concurrency'] = 25
  2. Save the file and reconfigure GitLab for the changes to take effect:

    sudo gitlab-ctl reconfigure

This sets the concurrency (number of threads) for the Sidekiq process.

Modify the check interval

To modify the check interval for the additional Sidekiq processes:

  1. Edit /etc/gitlab/gitlab.rb and add:

    sidekiq['interval'] = 5
  2. Save the file and reconfigure GitLab for the changes to take effect.

This tells the additional processes how often to check for enqueued jobs.

Troubleshoot using the CLI

WARNING: It's recommended to use /etc/gitlab/gitlab.rb to configure the Sidekiq processes. If you experience a problem, you should contact GitLab support. Use the command line at your own risk.

For debugging purposes, you can start extra Sidekiq processes by using the command /opt/gitlab/embedded/service/gitlab-rails/bin/sidekiq-cluster. This command takes arguments using the following syntax:

/opt/gitlab/embedded/service/gitlab-rails/bin/sidekiq-cluster [QUEUE,QUEUE,...] [QUEUE, ...]

Each separate argument denotes a group of queues that have to be processed by a Sidekiq process. Multiple queues can be processed by the same process by separating them with a comma instead of a space.

Instead of a queue, a queue namespace can also be provided, to have the process automatically listen on all queues in that namespace without needing to explicitly list all the queue names. For more information about queue namespaces, see the relevant section in the Sidekiq style guide.

For example, say you want to start 2 extra processes: one to process the process_commit queue, and one to process the post_receive queue. This can be done as follows:

/opt/gitlab/embedded/service/gitlab-rails/bin/sidekiq-cluster process_commit post_receive

If you instead want to start one process processing both queues, you'd use the following syntax:

/opt/gitlab/embedded/service/gitlab-rails/bin/sidekiq-cluster process_commit,post_receive

If you want to have one Sidekiq process dealing with the process_commit and post_receive queues, and one process to process the gitlab_shell queue, you'd use the following:

/opt/gitlab/embedded/service/gitlab-rails/bin/sidekiq-cluster process_commit,post_receive gitlab_shell

Monitor the sidekiq-cluster command

The sidekiq-cluster command does not terminate once it has started the desired amount of Sidekiq processes. Instead, the process continues running and forward any signals to the child processes. This makes it easy to stop all Sidekiq processes as you simply send a signal to the sidekiq-cluster process, instead of having to send it to the individual processes.

If the sidekiq-cluster process crashes or receives a SIGKILL, the child processes terminate themselves after a few seconds. This ensures you don't end up with zombie Sidekiq processes.

All of this makes monitoring the processes fairly easy. Simply hook up sidekiq-cluster to your supervisor of choice (for example, runit) and you're good to go.

If a child process died the sidekiq-cluster command signals all remaining process to terminate, then terminate itself. This removes the need for sidekiq-cluster to re-implement complex process monitoring/restarting code. Instead you should make sure your supervisor restarts the sidekiq-cluster process whenever necessary.

PID files

The sidekiq-cluster command can store its PID in a file. By default no PID file is written, but this can be changed by passing the --pidfile option to sidekiq-cluster. For example:

/opt/gitlab/embedded/service/gitlab-rails/bin/sidekiq-cluster --pidfile /var/run/gitlab/ process_commit

Keep in mind that the PID file contains the PID of the sidekiq-cluster command and not the PID(s) of the started Sidekiq processes.


The Rails environment can be set by passing the --environment flag to the sidekiq-cluster command, or by setting RAILS_ENV to a non-empty value. The default value can be found in /opt/gitlab/etc/gitlab-rails/env/RAILS_ENV.