Commit fc6b6e07 authored by ASN.1 Documenter's avatar ASN.1 Documenter
Browse files

fix editHelp issues

parent 924b8e50

ETSI-ITS-CDD.asn

+31 −31
Original line number Original line Diff line number Diff line
@@ -110,7 +110,7 @@ AccelerationMagnitudeValue ::= INTEGER { 
 *

 *

 * The value shall be set to:

 * The value shall be set to:

 * - `-160` for acceleration values equal to or less than -16 m/s^2,

 * - `-160` for acceleration values equal to or less than -16 m/s^2,

 * - `n (n > -160 and n = 0)` to indicate negative acceleration equal to or less than n x 0,1 m/s^2, and greater than (n-1) x 0,1 m/s^2,

 * - `n (n > -160 and n ≤ 0)` to indicate negative acceleration equal to or less than n x 0,1 m/s^2, and greater than (n-1) x 0,1 m/s^2,

 * - `n (n > 0 and n < 160)` to indicate positive acceleration equal to or less than n x 0,1 m/s^2, and greater than (n-1) x 0,1 m/s^2,

 * - `n (n > 0 and n < 160)` to indicate positive acceleration equal to or less than n x 0,1 m/s^2, and greater than (n-1) x 0,1 m/s^2,

 * - `160` for acceleration values greater than 15,9 m/s^2,

 * - `160` for acceleration values greater than 15,9 m/s^2,

 * - `161` when the data is unavailable.

 * - `161` when the data is unavailable.
@@ -478,7 +478,7 @@ AxlesCount ::= INTEGER{ 
 * 

 * 

 * The value shall be set to:

 * The value shall be set to:

 * - `2999` indicates that the applicable value is less than 29990 Pa,

 * - `2999` indicates that the applicable value is less than 29990 Pa,

 * - `n (n ? 3000 and n = 12000)` indicates that the applicable value is equal to or less than n x 10 Pa and greater than (n-1) x 10 Pa, 

 * - `n (n ? 3000 and n ≤ 12000)` indicates that the applicable value is equal to or less than n x 10 Pa and greater than (n-1) x 10 Pa, 

 * - `12001` indicates that the values is greater than 120000 Pa,

 * - `12001` indicates that the values is greater than 120000 Pa,

 * - `12002` indicates that the information is not available.

 * - `12002` indicates that the information is not available.

 *

 *
@@ -531,7 +531,7 @@ CardinalNumber3b ::= INTEGER(1..8) 
 * a right-hand local coordinate system from the abscissa.

 * a right-hand local coordinate system from the abscissa.

 *

 *

 * The value shall be set to: 

 * The value shall be set to: 

 * - `n (n = 0 and n < 3600)` if the angle is equal to or less than n x 0,1 degrees, and greater than (n-1) x 0,1 degrees,

 * - `n (n ≥ 0 and n < 3600)` if the angle is equal to or less than n x 0,1 degrees, and greater than (n-1) x 0,1 degrees,

 * - `36001` if the accuracy information is not available.

 * - `36001` if the accuracy information is not available.

 *

 *

 * The value 3600 shall not be used. 

 * The value 3600 shall not be used.
@@ -1055,7 +1055,7 @@ DeltaAltitude ::= INTEGER { 
 * It may be used to describe a geographical point with regards to a specific reference geographical position.

 * It may be used to describe a geographical point with regards to a specific reference geographical position.

 *

 *

 * The value shall be set to:

 * The value shall be set to:

 * - `n` (`n = -131 071` and `n < 0`) for offset n x 10^-7 degree towards the south from the reference position,

 * - `n` (`n ≥ -131 071` and `n < 0`) for offset n x 10^-7 degree towards the south from the reference position,

 * - `0` for no latitudinal offset,

 * - `0` for no latitudinal offset,

 * - `n` (`n > 0` and `n < 131 072`) for offset n x 10^-7 degree towards the north from the reference position,

 * - `n` (`n > 0` and `n < 131 072`) for offset n x 10^-7 degree towards the north from the reference position,

 * - `131 072` when the information is unavailable.

 * - `131 072` when the information is unavailable.
@@ -1073,7 +1073,7 @@ DeltaLatitude ::= INTEGER { 
 * It may be used to describe a geographical point with regards to a specific reference geographical position.

 * It may be used to describe a geographical point with regards to a specific reference geographical position.

 *

 *

 * The value shall be set to:

 * The value shall be set to:

 * - `n` (`n = -131 071` and `n < 0`) for offset n x 10^-7 degree towards the west from the reference position,

 * - `n` (`n ≥ -131 071` and `n < 0`) for offset n x 10^-7 degree towards the west from the reference position,

 * - `0` for no longitudinal offset,

 * - `0` for no longitudinal offset,

 * - `n` (`n > 0` and `n < 131 072`) for offset n x 10^-7 degree towards the east from the reference position, 

 * - `n` (`n > 0` and `n < 131 072`) for offset n x 10^-7 degree towards the east from the reference position, 

 * - `131 072` when the information is unavailable.

 * - `131 072` when the information is unavailable.
@@ -1147,7 +1147,7 @@ DeltaTimeTenthOfSecond::= INTEGER { 
 *

 *

 * The value shall be set to:

 * The value shall be set to:

 * - `-0` for a difference in time of 0 seconds. 

 * - `-0` for a difference in time of 0 seconds. 

 * - `n (n > 0 n = 86400)` to indicate a time value equal to or less than n x 1 s, and greater than (n-1) x 1 s,

 * - `n (n > 0 n ≤ 86400)` to indicate a time value equal to or less than n x 1 s, and greater than (n-1) x 1 s,

 *

 *

 * @unit: 1 s

 * @unit: 1 s

 * @category: Basic information

 * @category: Basic information
@@ -1547,7 +1547,7 @@ HeadingValue ::= INTEGER { 
 * rear to front). 

 * rear to front). 

 *

 *

 * The value shall be set to:

 * The value shall be set to:

 * - `n (n = 1 and n < 99)` if the height information is equal to or less than n x 0,01 metre and more than (n-1) x 0,01 metre,

 * - `n (n ≥ 1 and n < 99)` if the height information is equal to or less than n x 0,01 metre and more than (n-1) x 0,01 metre,

 * - `99` if the height is out of range, i.e. equal to or greater than 0,98 m,

 * - `99` if the height is out of range, i.e. equal to or greater than 0,98 m,

 * - `100` if the height information is not available.

 * - `100` if the height information is not available.

 *

 *
@@ -1841,7 +1841,7 @@ LaneType::= INTEGER{ 
 * This DE represents the width of a lane measured at a defined position.

 * This DE represents the width of a lane measured at a defined position.

 *

 *

 * The value shall be set to:

 * The value shall be set to:

 * - `n (n = 1 and n < 1022)` if the lane width information is equal to or less than n x 0,01 metre and more than (n-1) x 0,01 metre,

 * - `n (n ≥ 1 and n < 1022)` if the lane width information is equal to or less than n x 0,01 metre and more than (n-1) x 0,01 metre,

 * - `1022` if the lane width is out of range, i.e. greater than 10,21 m,

 * - `1022` if the lane width is out of range, i.e. greater than 10,21 m,

 * - `1023` if the lane width information is not available.

 * - `1023` if the lane width information is not available.

 *

 *
@@ -1859,7 +1859,7 @@ LaneWidth::= INTEGER (0..1023) 
 * The specific WGS84 coordinate system is specified by the corresponding standards applying this DE.

 * The specific WGS84 coordinate system is specified by the corresponding standards applying this DE.

 *

 *

 * The value shall be set to:

 * The value shall be set to:

 * - `n (n = -900 000 000 and n < 0)` x 10^-7 degree, i.e. negative values for latitudes south of the Equator,

 * - `n (n ≥ -900 000 000 and n < 0)` x 10^-7 degree, i.e. negative values for latitudes south of the Equator,

 * - `0` is used for the latitude of the equator,

 * - `0` is used for the latitude of the equator,

 * - `n (n > 0 and n < 900 000 001)` x 10^-7 degree, i.e. positive values for latitudes north of the Equator,

 * - `n (n > 0 and n < 900 000 001)` x 10^-7 degree, i.e. positive values for latitudes north of the Equator,

 * - `900 000 001` when the information is unavailable.

 * - `900 000 001` when the information is unavailable.
@@ -1878,7 +1878,7 @@ Latitude ::= INTEGER { 
 *

 *

 * The value shall be set to:

 * The value shall be set to:

 * - `-160` for acceleration values equal to or less than -16 m/s^2,

 * - `-160` for acceleration values equal to or less than -16 m/s^2,

 * - `n (n > -160 and n = 0)` to indicate that the vehicle is accelerating towards the right side with regards to the vehicle orientation 

 * - `n (n > -160 and n ≤ 0)` to indicate that the vehicle is accelerating towards the right side with regards to the vehicle orientation 

 *                            with acceleration equal to or less than n x 0,1 m/s^2 and greater than (n-1) x 0,1 m/s^2,

 *                            with acceleration equal to or less than n x 0,1 m/s^2 and greater than (n-1) x 0,1 m/s^2,

 * - `n (n > 0 and n < 160)` to indicate that the vehicle is accelerating towards the left hand side with regards to the vehicle orientation 

 * - `n (n > 0 and n < 160)` to indicate that the vehicle is accelerating towards the left hand side with regards to the vehicle orientation 

						     with acceleration equal to or less than n x 0,1 m/s^2 and greater than (n-1) x 0,1 m/s^2,

						     with acceleration equal to or less than n x 0,1 m/s^2 and greater than (n-1) x 0,1 m/s^2,
@@ -1944,7 +1944,7 @@ Longitude ::= INTEGER { 
 *

 *

 * The value shall be set to:

 * The value shall be set to:

 * - `-160` for acceleration values equal to or less than -16 m/s^2,

 * - `-160` for acceleration values equal to or less than -16 m/s^2,

 * - `n (n > -160 and n = 0)` to indicate that the vehicle is braking with acceleration equal to or less than n x 0,1 m/s^2, and greater than (n-1) x 0,1 m/s^2

 * - `n (n > -160 and n ≤ 0)` to indicate that the vehicle is braking with acceleration equal to or less than n x 0,1 m/s^2, and greater than (n-1) x 0,1 m/s^2

 * - `n (n > 0 and n < 160)` to indicate that the vehicle is accelerating with acceleration equal to or less than n x 0,1 m/s^2, and greater than (n-1) x 0,1 m/s^2,

 * - `n (n > 0 and n < 160)` to indicate that the vehicle is accelerating with acceleration equal to or less than n x 0,1 m/s^2, and greater than (n-1) x 0,1 m/s^2,

 * - `160` for acceleration values greater than 15,9 m/s^2,

 * - `160` for acceleration values greater than 15,9 m/s^2,

 * - `161` when the data is unavailable. 

 * - `161` when the data is unavailable.
@@ -1967,7 +1967,7 @@ LongitudinalAccelerationValue::= INTEGER { 
 * This DE represents the longitudinal offset of a map-matched position along a matched lane, beginning from the lane's starting point.

 * This DE represents the longitudinal offset of a map-matched position along a matched lane, beginning from the lane's starting point.

 * 

 * 

 * The value shall be set to:

 * The value shall be set to:

 * - `n (n = 1 and n < 32766)` if the longitudinal offset information is equal to or less than n x 0,1 metre and more than (n-1) x 0,1 metre,

 * - `n (n ≥ 1 and n < 32766)` if the longitudinal offset information is equal to or less than n x 0,1 metre and more than (n-1) x 0,1 metre,

 * - `32 766` if the longitudinal offset is out of range, i.e. greater than 3276,5 m,

 * - `32 766` if the longitudinal offset is out of range, i.e. greater than 3276,5 m,

 * - `32 767` if the longitudinal offset information is not available. 

 * - `32 767` if the longitudinal offset information is not available. 

 *

 *
@@ -2095,7 +2095,7 @@ MessageId::= INTEGER { 
 * This DE represents the number of occupants in a vehicle.

 * This DE represents the number of occupants in a vehicle.

 *

 *

 * The value shall be set to:

 * The value shall be set to:

 * - `n (n = 0 and n < 126)` for the number n of occupants,

 * - `n (n ≥ 0 and n < 126)` for the number n of occupants,

 * - `126` for values equal to or higher than 125,

 * - `126` for values equal to or higher than 125,

 * - `127` if information is not available.

 * - `127` if information is not available.

 *

 *
@@ -2164,9 +2164,9 @@ ObjectDimensionConfidence ::= INTEGER { 
 * This DE indicates the face or part of a face of a solid object.

 * This DE indicates the face or part of a face of a solid object.

 *

 *

 * The object is modelled  as a rectangular prism that has a length that is greater than its width, with the faces of the object being defined as:

 * The object is modelled  as a rectangular prism that has a length that is greater than its width, with the faces of the object being defined as:

 * - front: the face defined by the prism´s width and height, and which is the first face in direction of longitudinal movement of the object,

 * - front: the face defined by the prism?s width and height, and which is the first face in direction of longitudinal movement of the object,

 * - back: the face defined by the prism´s width and height, and which is the last face in direction of longitudinal movement of the object,

 * - back: the face defined by the prism?s width and height, and which is the last face in direction of longitudinal movement of the object,

 * - side: the faces defined by the prism´s length and height with "left" and "right" defined by looking at the front face and "front" and "back" defined w.r.t to the front and back faces. 

 * - side: the faces defined by the prism?s length and height with "left" and "right" defined by looking at the front face and "front" and "back" defined w.r.t to the front and back faces. 

 *

 *

 * Note: It is permissible to derive the required object dimensions and orientation from models to provide a best guess.

 * Note: It is permissible to derive the required object dimensions and orientation from models to provide a best guess.

 * 

 *
@@ -3151,7 +3151,7 @@ SteeringWheelAngleConfidence ::= INTEGER { 
 * 

 * 

 * The value shall be set to:

 * The value shall be set to:

 * - `-511` if the steering wheel angle is equal to or greater than 511 x 1,5 degrees = 766,5 degrees to the right,

 * - `-511` if the steering wheel angle is equal to or greater than 511 x 1,5 degrees = 766,5 degrees to the right,

 * - `n (n > -511 and n = 0)` if  the steering wheel angle is equal to or less than n x 1,5 degrees, and greater than (n-1) x 1,5 degrees, 

 * - `n (n > -511 and n ≤ 0)` if  the steering wheel angle is equal to or less than n x 1,5 degrees, and greater than (n-1) x 1,5 degrees, 

      turning clockwise (i.e. to the right),

      turning clockwise (i.e. to the right),

 * - `n (n > 1 and n < 511)` if the steering wheel angle is equal to or less than n x 0,1 degrees, and greater than (n-1) x 0,1 degrees, 

 * - `n (n > 1 and n < 511)` if the steering wheel angle is equal to or less than n x 0,1 degrees, and greater than (n-1) x 0,1 degrees, 

      turning counter-clockwise (i.e. to the left),

      turning counter-clockwise (i.e. to the left),
@@ -3357,7 +3357,7 @@ TrailerPresenceInformation ::= ENUMERATED { 
 * This  DE  defines  the  probability  that the ego trajectory  intercepts  with any  other object's  trajectory  on the  road. 

 * This  DE  defines  the  probability  that the ego trajectory  intercepts  with any  other object's  trajectory  on the  road. 

 * 

 * 

 * The value shall be set to:

 * The value shall be set to:

 * - `n (n = 0 and n = 50)` to indicate the actual probability,

 * - `n (n = 0 and n ≤ 50)` to indicate the actual probability,

 * - the values between 51 and 62 are reserved,

 * - the values between 51 and 62 are reserved,

 * - `63`: to indicate that the information is unavailable. 

 * - `63`: to indicate that the information is unavailable. 

 *

 *
@@ -3632,7 +3632,7 @@ VehicleWidth ::= INTEGER { 
 *

 *

 * The value shall be set to:

 * The value shall be set to:

 * - `-160` for acceleration values equal to or less than -16 m/s^2,

 * - `-160` for acceleration values equal to or less than -16 m/s^2,

 * - `n (n > -160 and n = 0)` to indicate downwards acceleration equal to or less than n x 0,1 m/s^2, and greater than (n-1) x 0,1 m/s^2,

 * - `n (n > -160 and n ≤ 0)` to indicate downwards acceleration equal to or less than n x 0,1 m/s^2, and greater than (n-1) x 0,1 m/s^2,

 * - `n (n > 0 and n < 160)` to indicate upwards acceleration equal to or less than n x 0,1 m/s^2, and greater than (n-1) x 0,1 m/s^2,

 * - `n (n > 0 and n < 160)` to indicate upwards acceleration equal to or less than n x 0,1 m/s^2, and greater than (n-1) x 0,1 m/s^2,

 * - `160` for acceleration values greater than 15,9 m/s^2,

 * - `160` for acceleration values greater than 15,9 m/s^2,

 * - `161` when the data is unavailable.

 * - `161` when the data is unavailable.
@@ -3904,7 +3904,7 @@ VruSpecificExteriorLights ::= BIT STRING { 
 * This DE indicates the perpendicular distance between front and rear axle of the wheel base of vehicle.

 * This DE indicates the perpendicular distance between front and rear axle of the wheel base of vehicle.

 *

 *

 * The value shall be set to:

 * The value shall be set to:

 * - `n (n = 1 and n < 126)` if the value is equal to or less than n x 0,1 metre  and more than (n-1) x 0,1 metre,

 * - `n (n ≥ 1 and n < 126)` if the value is equal to or less than n x 0,1 metre  and more than (n-1) x 0,1 metre,

 * - `126` indicates that the wheel base distance is equal to or greater than 12,5 metres,

 * - `126` indicates that the wheel base distance is equal to or greater than 12,5 metres,

 * - `127` indicates that the information is unavailable.

 * - `127` indicates that the information is unavailable.

 *

 *
@@ -3922,7 +3922,7 @@ WheelBaseVehicle ::= INTEGER { 
 * If required, the confidence level can be defined by the corresponding standards applying this DE.

 * If required, the confidence level can be defined by the corresponding standards applying this DE.

 * 

 * 

 * The value shall be set to:

 * The value shall be set to:

 * - `n (n = 1 and n < 126)` if the confidence value is equal to or less than n x 0,1 degrees and more than (n-1) x 0,1 degrees,

 * - `n (n ≥ 1 and n < 126)` if the confidence value is equal to or less than n x 0,1 degrees and more than (n-1) x 0,1 degrees,

 * - `126` if the confidence value is out of range, i.e. greater than 12,5 degrees,

 * - `126` if the confidence value is out of range, i.e. greater than 12,5 degrees,

 * - `127` if the confidence value is not available.

 * - `127` if the confidence value is not available.

 *

 *
@@ -4030,7 +4030,7 @@ YawRateConfidence ::= ENUMERATED { 
 *

 *

 * The value shall be set to:

 * The value shall be set to:

 * - `-32 766` to indicate that the yaw rate is equal to or greater than 327,66 degrees/second to the right,

 * - `-32 766` to indicate that the yaw rate is equal to or greater than 327,66 degrees/second to the right,

 * - `n (n > -32 766 and n = 0)` to indicate that the rotation is clockwise (i.e. to the right) and is equal to or less than n x 0,01 degrees/s, 

 * - `n (n > -32 766 and n ≤ 0)` to indicate that the rotation is clockwise (i.e. to the right) and is equal to or less than n x 0,01 degrees/s, 

      and greater than (n-1) x 0,01 degrees/s,

      and greater than (n-1) x 0,01 degrees/s,

 * - `n (n > 0 and n < 32 766)` to indicate that the rotation is anti-clockwise (i.e. to the left) and is equal to or less than n x 0,01 degrees/s, 

 * - `n (n > 0 and n < 32 766)` to indicate that the rotation is anti-clockwise (i.e. to the left) and is equal to or less than n x 0,01 degrees/s, 

      and greater than (n-1) x 0,01 degrees/s,

      and greater than (n-1) x 0,01 degrees/s,
@@ -4556,12 +4556,12 @@ CenDsrcTollingZone ::= SEQUENCE { 




/** 

/** 

 * 

 * 

 * This DF represents the shape of a circular area or a right cylinder that is centred on the shape´s reference point. 

 * This DF represents the shape of a circular area or a right cylinder that is centred on the shape?s reference point. 

 *

 *

 * It shall include the following components: 

 * It shall include the following components: 

 * 

 * 

 * @field shapeReferencePoint: optional reference point that represents the centre of the circle, relative to an externally specified reference position. 

 * @field shapeReferencePoint: optional reference point that represents the centre of the circle, relative to an externally specified reference position. 

 * If this component is absent, the externally specified reference position represents the shape´s reference point. 

 * If this component is absent, the externally specified reference position represents the shape?s reference point. 

 *

 *

 * @field radius: the radius of the circular area.

 * @field radius: the radius of the circular area.

 *

 *
@@ -4758,12 +4758,12 @@ DigitalMap ::= SEQUENCE (SIZE(1..256)) OF ReferencePosition 




/** 

/** 

 * 

 * 

 * This DF represents the shape of an elliptical area or right elliptical cylinder that is centred on the shape´s reference point. 

 * This DF represents the shape of an elliptical area or right elliptical cylinder that is centred on the shape?s reference point. 

 *

 *

 * It shall include the following components: 

 * It shall include the following components: 

 * 

 * 

 * @field shapeReferencePoint: optional reference point which represents the centre of the ellipse, relative to an externally specified reference position. 

 * @field shapeReferencePoint: optional reference point which represents the centre of the ellipse, relative to an externally specified reference position. 

 * If this component is absent, the externally specified reference position represents the shape´s  reference point. 

 * If this component is absent, the externally specified reference position represents the shape?s  reference point. 

 *

 *

 * @field semiMajorAxisLength: half length of the major axis of the ellipse.

 * @field semiMajorAxisLength: half length of the major axis of the ellipse.

 * 

 *
@@ -5496,7 +5496,7 @@ PathPointPredicted::= SEQUENCE { 
 * @field measurementDeltaTime: the time difference from a reference time to the time of the  measurement of the object. 

 * @field measurementDeltaTime: the time difference from a reference time to the time of the  measurement of the object. 

 * Negative values indicate that the provided object state refers to a point in time before the reference time.

 * Negative values indicate that the provided object state refers to a point in time before the reference time.

 *

 *

 * @field position: the position of the geometric centre of the object´s bounding box within the pre-defined coordinate system.

 * @field position: the position of the geometric centre of the object?s bounding box within the pre-defined coordinate system.

 *

 *

 * @field velocity: the velocity vector of the object within the pre-defined coordinate system.

 * @field velocity: the velocity vector of the object within the pre-defined coordinate system.

 *

 *
@@ -5558,10 +5558,10 @@ PerceivedObject ::= SEQUENCE { 
 * It shall include the following components: 

 * It shall include the following components: 

 *

 *

 * @field shapeReferencePoint: the optional reference point used for the definition of the shape, relative to an externally specified reference position. 

 * @field shapeReferencePoint: the optional reference point used for the definition of the shape, relative to an externally specified reference position. 

 * If this component is absent, the externally specified reference position represents the shape´s reference point. 

 * If this component is absent, the externally specified reference position represents the shape?s reference point. 

 *

 *

 * @field polygon: the polygonal area represented by a list of minimum `3` to maximum `16` @ref CartesianPosition3d.

 * @field polygon: the polygonal area represented by a list of minimum `3` to maximum `16` @ref CartesianPosition3d.

 * All nodes of the polygon shall be considered relative to the shape´s reference point.

 * All nodes of the polygon shall be considered relative to the shape?s reference point.

 *

 *

 * @field height: the optional height, present if the shape is a right prism extending in the positive z-axis.

 * @field height: the optional height, present if the shape is a right prism extending in the positive z-axis.

 * 

 *
@@ -5733,9 +5733,9 @@ PtActivation ::= SEQUENCE { 
 * It shall include the following components:

 * It shall include the following components:

 * 

 * 

 * @field shapeReferencePoint: the optional reference point used for the definition of the shape, relative to an externally specified reference position. 

 * @field shapeReferencePoint: the optional reference point used for the definition of the shape, relative to an externally specified reference position. 

 * If this component is absent, the externally specified reference position represents the shape´s  reference point. 

 * If this component is absent, the externally specified reference position represents the shape?s  reference point. 

 *

 *

 * @field range: the radial range of the shape from the shape´s reference point. 

 * @field range: the radial range of the shape from the shape?s reference point. 

 *

 *

 * @field stationaryHorizontalOpeningAngleStart:  the orientation indicating the beginning of the 

 * @field stationaryHorizontalOpeningAngleStart:  the orientation indicating the beginning of the 

 * shape's horizontal opening angle in positive angular direction with respect to the 

 * shape's horizontal opening angle in positive angular direction with respect to the