Loading CHANGES +2 −63 Original line number Diff line number Diff line Loading @@ -2,71 +2,10 @@ OpenSSL CHANGES _______________ Changes between 0.9.5a and 0.9.6 [24 Sep 2000] *) In ssl23_get_client_hello, generate an error message when faced with an initial SSL 3.0/TLS record that is too small to contain the first two bytes of the ClientHello message, i.e. client_version. (Note that this is a pathologic case that probably has never happened in real life.) The previous approach was to use the version number from the record header as a substitute; but our protocol choice should not depend on that one because it is not authenticated by the Finished messages. [Bodo Moeller] *) More robust randomness gathering functions for Windows. [Jeffrey Altman <jaltman@columbia.edu>] *) For compatibility reasons if the flag X509_V_FLAG_ISSUER_CHECK is not set then we don't setup the error code for issuer check errors to avoid possibly overwriting other errors which the callback does handle. If an application does set the flag then we assume it knows what it is doing and can handle the new informational codes appropriately. [Steve Henson] *) Fix for a nasty bug in ASN1_TYPE handling. ASN1_TYPE is used for a general "ANY" type, as such it should be able to decode anything including tagged types. However it didn't check the class so it would wrongly interpret tagged types in the same way as their universal counterpart and unknown types were just rejected. Changed so that the tagged and unknown types are handled in the same way as a SEQUENCE: that is the encoding is stored intact. There is also a new type "V_ASN1_OTHER" which is used when the class is not universal, in this case we have no idea what the actual type is so we just lump them all together. [Steve Henson] *) On VMS, stdout may very well lead to a file that is written to in a record-oriented fashion. That means that every write() will write a separate record, which will be read separately by the programs trying to read from it. This can be very confusing. The solution is to put a BIO filter in the way that will buffer text until a linefeed is reached, and then write everything a line at a time, so every record written will be an actual line, not chunks of lines and not (usually doesn't happen, but I've seen it once) several lines in one record. BIO_f_linebuffer() is the answer. Currently, it's a VMS-only method, because that's where it has been tested well enough. [Richard Levitte] *) Remove 'optimized' squaring variant in BN_mod_mul_montgomery, it can return incorrect results. (Note: The buggy variant was not enabled in OpenSSL 0.9.5a, but it was in 0.9.6-beta[12].) [Bodo Moeller] *) Disable the check for content being present when verifying detached signatures in pk7_smime.c. Some versions of Netscape (wrongly) include zero length content when signing messages. [Steve Henson] Changes between 0.9.5a and 0.9.6 [xx XXX 2000] *) New BIO_shutdown_wr macro, which invokes the BIO_C_SHUTDOWN_WR BIO_ctrl (for BIO pairs). [Bodo Möller] *) Add DSO method for VMS. [Richard Levitte] Loading Loading @@ -300,7 +239,7 @@ [Steve Henson] *) Changes needed for Tandem NSK. [Scott Uroff <scott@xypro.com>] [Scott Uroff scott@xypro.com] *) Fix SSL 2.0 rollback checking: Due to an off-by-one error in RSA_padding_check_SSLv23(), special padding was never detected Loading Configure +6 −9 Original line number Diff line number Diff line Loading @@ -216,16 +216,16 @@ my %table=( # Since there is mention of this in shlib/hpux10-cc.sh "hpux-parisc-cc-o4","cc:-Ae +O4 +ESlit -z -DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY:::-ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1::::::::::dl", "hpux-parisc-gcc","gcc:-O3 -DB_ENDIAN -DBN_DIV2W:::-ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1::::::::::dl", "hpux64-parisc-cc","cc:-Ae +DD64 +O3 +ESlit -z -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT:-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dlfcn", "hpux64-parisc-cc","cc:-Ae +DD64 +O3 +ESlit -z -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT:-ldld:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dl", # More attempts at unified 10.X and 11.X targets for HP C compiler. # # Chris Ruemmler <ruemmler@cup.hp.com> # Kevin Steves <ks@hp.se> "hpux-parisc-cc","cc:+O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY::-D_REENTRANT:-ldld:MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dl", "hpux-parisc2-cc","cc:+DA2.0 +DS2.0 +O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT:-ldld:SIXTY_FOUR_BIT MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/pa-risc2.o:::::::::dl", "hpux64-parisc2-cc","cc:+DD64 +O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT:-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/pa-risc2W.o:::::::::dlfcn", "hpux-parisc1_1-cc","cc:+DA1.1 +DS1.1 +O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT:-ldld:MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dl", "hpux-parisc-cc","cc:+O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY::-D_REENTRANT:-ldl:MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dl", "hpux-parisc2-cc","cc:+DA2.0 +DS2.0 +O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT:-ldl:SIXTY_FOUR_BIT MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/pa-risc2.o:::::::::dl", "hpux64-parisc2-cc","cc:+DD64 +O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT:-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/pa-risc2W.o:::::::::dl", "hpux-parisc1_1-cc","cc:+DA1.1 +DS1.1 +O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT:-ldl:MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dl", # HPUX 9.X config. # Don't use the bundled cc. It is broken. Use HP ANSI C if possible, or Loading Loading @@ -256,16 +256,13 @@ my %table=( #"hpux11-64bit-cc","cc:+DA2.0W -g -D_HPUX_SOURCE -Aa -Ae +ESlit::-D_REENTRANT::SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT :::", # Use unified settings above instead. #### HP MPE/iX http://jazz.external.hp.com/src/openssl/ "MPE/iX-gcc", "gcc:-D_ENDIAN -DBN_DIV2W -O3 -DMPE -D_POSIX_SOURCE -D_SOCKET_SOURCE -I/SYSLOG/PUB::(unknown):-L/SYSLOG/PUB -lsyslog -lsocket -lcurses:BN_LLONG DES_PTR DES_UNROLL DES_RISC1:::", # Dec Alpha, OSF/1 - the alpha164-cc is the flags for a 21164A with # the new compiler # For gcc, the following gave a %50 speedup on a 164 over the 'DES_INT' version "alpha-gcc","gcc:-O3::(unknown)::SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_UNROLL DES_RISC1:asm/alpha.o:::::::::dlfcn:true64-shared", "alpha-cc", "cc:-std1 -tune host -O4 -readonly_strings::(unknown)::SIXTY_FOUR_BIT_LONG RC4_CHUNK:asm/alpha.o:::::::::dlfcn:true64-shared", "alpha164-cc", "cc:-std1 -tune host -fast -readonly_strings::(unknown)::SIXTY_FOUR_BIT_LONG RC4_CHUNK:asm/alpha.o:::::::::dlfcn:true64-shared", "FreeBSD-alpha","gcc:-DTERMIOS -O -fomit-frame-pointer::(unknown)::SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_PTR DES_RISC2:::", "FreeBSD-alpha","gcc:-DTERMIOS -O3 -fomit-frame-pointer::(unknown)::SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_PTR DES_RISC2:::", #### Alpha Linux with GNU C and Compaq C setups # Special notes: Loading FAQ +3 −3 Original line number Diff line number Diff line Loading @@ -32,7 +32,7 @@ OpenSSL - Frequently Asked Questions * Which is the current version of OpenSSL? The current version is available from <URL: http://www.openssl.org>. OpenSSL 0.9.6 was released on September 24th, 2000. OpenSSL 0.9.5a was released on April 1st, 2000. In addition to the current stable release, you can also access daily snapshots of the OpenSSL development version at <URL: Loading Loading @@ -135,7 +135,7 @@ installing the SUNski package from Sun patch 105710-01 (Sparc) which adds a /dev/random device and make sure it gets used, usually through $RANDFILE. There are probably similar patches for the other Solaris versions. However, be warned that /dev/random is usually a blocking device, which may have some effects on OpenSSL. device, which may have som effects on OpenSSL. * Why does the linker complain about undefined symbols? Loading Loading @@ -194,7 +194,7 @@ unsigned char *buf, *p; int len; len = i2d_PKCS7(p7, NULL); buf = OPENSSL_malloc(len); /* or Malloc, error checking omitted */ buf = OPENSSL_Malloc(len); /* or Malloc, error checking omitted */ p = buf; i2d_PKCS7(p7, &p); Loading INSTALL.W32 +2 −2 Original line number Diff line number Diff line Loading @@ -108,8 +108,8 @@ * Compiler installation: Mingw32 is available from <ftp://ftp.xraylith.wisc.edu/pub/khan/ gnu-win32/mingw32/gcc-2.95.2/gcc-2.95.2-msvcrt.exe>. GNU make is at Mingw32 is available from <ftp://ftp.xraylith.wisc.edu/pub/khan/gnu-win32/ mingw32/egcs-1.1.2/egcs-1.1.2-mingw32.zip>. GNU make is at <ftp://agnes.dida.physik.uni-essen.de/home/janjaap/mingw32/binaries/ make-3.76.1.zip>. Install both of them in C:\egcs-1.1.2 and run C:\egcs-1.1.2\mingw32.bat to set the PATH. Loading Makefile.org +1 −1 Original line number Diff line number Diff line Loading @@ -62,7 +62,7 @@ AR=ar r RANLIB= ranlib PERL= perl TAR= tar TARFLAGS= --no-recursion TARFLAGS= --norecurse # Set BN_ASM to bn_asm.o if you want to use the C version BN_ASM= bn_asm.o Loading Loading
CHANGES +2 −63 Original line number Diff line number Diff line Loading @@ -2,71 +2,10 @@ OpenSSL CHANGES _______________ Changes between 0.9.5a and 0.9.6 [24 Sep 2000] *) In ssl23_get_client_hello, generate an error message when faced with an initial SSL 3.0/TLS record that is too small to contain the first two bytes of the ClientHello message, i.e. client_version. (Note that this is a pathologic case that probably has never happened in real life.) The previous approach was to use the version number from the record header as a substitute; but our protocol choice should not depend on that one because it is not authenticated by the Finished messages. [Bodo Moeller] *) More robust randomness gathering functions for Windows. [Jeffrey Altman <jaltman@columbia.edu>] *) For compatibility reasons if the flag X509_V_FLAG_ISSUER_CHECK is not set then we don't setup the error code for issuer check errors to avoid possibly overwriting other errors which the callback does handle. If an application does set the flag then we assume it knows what it is doing and can handle the new informational codes appropriately. [Steve Henson] *) Fix for a nasty bug in ASN1_TYPE handling. ASN1_TYPE is used for a general "ANY" type, as such it should be able to decode anything including tagged types. However it didn't check the class so it would wrongly interpret tagged types in the same way as their universal counterpart and unknown types were just rejected. Changed so that the tagged and unknown types are handled in the same way as a SEQUENCE: that is the encoding is stored intact. There is also a new type "V_ASN1_OTHER" which is used when the class is not universal, in this case we have no idea what the actual type is so we just lump them all together. [Steve Henson] *) On VMS, stdout may very well lead to a file that is written to in a record-oriented fashion. That means that every write() will write a separate record, which will be read separately by the programs trying to read from it. This can be very confusing. The solution is to put a BIO filter in the way that will buffer text until a linefeed is reached, and then write everything a line at a time, so every record written will be an actual line, not chunks of lines and not (usually doesn't happen, but I've seen it once) several lines in one record. BIO_f_linebuffer() is the answer. Currently, it's a VMS-only method, because that's where it has been tested well enough. [Richard Levitte] *) Remove 'optimized' squaring variant in BN_mod_mul_montgomery, it can return incorrect results. (Note: The buggy variant was not enabled in OpenSSL 0.9.5a, but it was in 0.9.6-beta[12].) [Bodo Moeller] *) Disable the check for content being present when verifying detached signatures in pk7_smime.c. Some versions of Netscape (wrongly) include zero length content when signing messages. [Steve Henson] Changes between 0.9.5a and 0.9.6 [xx XXX 2000] *) New BIO_shutdown_wr macro, which invokes the BIO_C_SHUTDOWN_WR BIO_ctrl (for BIO pairs). [Bodo Möller] *) Add DSO method for VMS. [Richard Levitte] Loading Loading @@ -300,7 +239,7 @@ [Steve Henson] *) Changes needed for Tandem NSK. [Scott Uroff <scott@xypro.com>] [Scott Uroff scott@xypro.com] *) Fix SSL 2.0 rollback checking: Due to an off-by-one error in RSA_padding_check_SSLv23(), special padding was never detected Loading
Configure +6 −9 Original line number Diff line number Diff line Loading @@ -216,16 +216,16 @@ my %table=( # Since there is mention of this in shlib/hpux10-cc.sh "hpux-parisc-cc-o4","cc:-Ae +O4 +ESlit -z -DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY:::-ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1::::::::::dl", "hpux-parisc-gcc","gcc:-O3 -DB_ENDIAN -DBN_DIV2W:::-ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1::::::::::dl", "hpux64-parisc-cc","cc:-Ae +DD64 +O3 +ESlit -z -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT:-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dlfcn", "hpux64-parisc-cc","cc:-Ae +DD64 +O3 +ESlit -z -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT:-ldld:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dl", # More attempts at unified 10.X and 11.X targets for HP C compiler. # # Chris Ruemmler <ruemmler@cup.hp.com> # Kevin Steves <ks@hp.se> "hpux-parisc-cc","cc:+O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY::-D_REENTRANT:-ldld:MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dl", "hpux-parisc2-cc","cc:+DA2.0 +DS2.0 +O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT:-ldld:SIXTY_FOUR_BIT MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/pa-risc2.o:::::::::dl", "hpux64-parisc2-cc","cc:+DD64 +O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT:-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/pa-risc2W.o:::::::::dlfcn", "hpux-parisc1_1-cc","cc:+DA1.1 +DS1.1 +O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT:-ldld:MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dl", "hpux-parisc-cc","cc:+O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY::-D_REENTRANT:-ldl:MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dl", "hpux-parisc2-cc","cc:+DA2.0 +DS2.0 +O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT:-ldl:SIXTY_FOUR_BIT MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/pa-risc2.o:::::::::dl", "hpux64-parisc2-cc","cc:+DD64 +O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT:-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:asm/pa-risc2W.o:::::::::dl", "hpux-parisc1_1-cc","cc:+DA1.1 +DS1.1 +O3 +Optrs_strongly_typed +Olibcalls -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT:-ldl:MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::::::::::dl", # HPUX 9.X config. # Don't use the bundled cc. It is broken. Use HP ANSI C if possible, or Loading Loading @@ -256,16 +256,13 @@ my %table=( #"hpux11-64bit-cc","cc:+DA2.0W -g -D_HPUX_SOURCE -Aa -Ae +ESlit::-D_REENTRANT::SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT :::", # Use unified settings above instead. #### HP MPE/iX http://jazz.external.hp.com/src/openssl/ "MPE/iX-gcc", "gcc:-D_ENDIAN -DBN_DIV2W -O3 -DMPE -D_POSIX_SOURCE -D_SOCKET_SOURCE -I/SYSLOG/PUB::(unknown):-L/SYSLOG/PUB -lsyslog -lsocket -lcurses:BN_LLONG DES_PTR DES_UNROLL DES_RISC1:::", # Dec Alpha, OSF/1 - the alpha164-cc is the flags for a 21164A with # the new compiler # For gcc, the following gave a %50 speedup on a 164 over the 'DES_INT' version "alpha-gcc","gcc:-O3::(unknown)::SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_UNROLL DES_RISC1:asm/alpha.o:::::::::dlfcn:true64-shared", "alpha-cc", "cc:-std1 -tune host -O4 -readonly_strings::(unknown)::SIXTY_FOUR_BIT_LONG RC4_CHUNK:asm/alpha.o:::::::::dlfcn:true64-shared", "alpha164-cc", "cc:-std1 -tune host -fast -readonly_strings::(unknown)::SIXTY_FOUR_BIT_LONG RC4_CHUNK:asm/alpha.o:::::::::dlfcn:true64-shared", "FreeBSD-alpha","gcc:-DTERMIOS -O -fomit-frame-pointer::(unknown)::SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_PTR DES_RISC2:::", "FreeBSD-alpha","gcc:-DTERMIOS -O3 -fomit-frame-pointer::(unknown)::SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_PTR DES_RISC2:::", #### Alpha Linux with GNU C and Compaq C setups # Special notes: Loading
FAQ +3 −3 Original line number Diff line number Diff line Loading @@ -32,7 +32,7 @@ OpenSSL - Frequently Asked Questions * Which is the current version of OpenSSL? The current version is available from <URL: http://www.openssl.org>. OpenSSL 0.9.6 was released on September 24th, 2000. OpenSSL 0.9.5a was released on April 1st, 2000. In addition to the current stable release, you can also access daily snapshots of the OpenSSL development version at <URL: Loading Loading @@ -135,7 +135,7 @@ installing the SUNski package from Sun patch 105710-01 (Sparc) which adds a /dev/random device and make sure it gets used, usually through $RANDFILE. There are probably similar patches for the other Solaris versions. However, be warned that /dev/random is usually a blocking device, which may have some effects on OpenSSL. device, which may have som effects on OpenSSL. * Why does the linker complain about undefined symbols? Loading Loading @@ -194,7 +194,7 @@ unsigned char *buf, *p; int len; len = i2d_PKCS7(p7, NULL); buf = OPENSSL_malloc(len); /* or Malloc, error checking omitted */ buf = OPENSSL_Malloc(len); /* or Malloc, error checking omitted */ p = buf; i2d_PKCS7(p7, &p); Loading
INSTALL.W32 +2 −2 Original line number Diff line number Diff line Loading @@ -108,8 +108,8 @@ * Compiler installation: Mingw32 is available from <ftp://ftp.xraylith.wisc.edu/pub/khan/ gnu-win32/mingw32/gcc-2.95.2/gcc-2.95.2-msvcrt.exe>. GNU make is at Mingw32 is available from <ftp://ftp.xraylith.wisc.edu/pub/khan/gnu-win32/ mingw32/egcs-1.1.2/egcs-1.1.2-mingw32.zip>. GNU make is at <ftp://agnes.dida.physik.uni-essen.de/home/janjaap/mingw32/binaries/ make-3.76.1.zip>. Install both of them in C:\egcs-1.1.2 and run C:\egcs-1.1.2\mingw32.bat to set the PATH. Loading
Makefile.org +1 −1 Original line number Diff line number Diff line Loading @@ -62,7 +62,7 @@ AR=ar r RANLIB= ranlib PERL= perl TAR= tar TARFLAGS= --no-recursion TARFLAGS= --norecurse # Set BN_ASM to bn_asm.o if you want to use the C version BN_ASM= bn_asm.o Loading
