Loading Configure +0 −1 Original line number Diff line number Diff line Loading @@ -400,7 +400,6 @@ my %table=( "unixware-7-gcc","gcc:-DL_ENDIAN -DFILIO_H -O3 -fomit-frame-pointer -m486 -Wall::-D_REENTRANT::-lsocket -lnsl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:gnu-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)", "OpenUNIX-8","cc:-O -DFILIO_H -Kalloca::-Kthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}:${x86_elf_asm}:dlfcn:svr5-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)", "OpenUNIX-8-gcc","gcc:-O -DFILIO_H -fomit-frame-pointer::-pthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}:${x86_elf_asm}:dlfcn:svr5-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)", "sco3-gcc", "gcc:-O3 -fomit-frame-pointer -Dssize_t=int -DNO_SYS_UN_H::(unknown)::-lsocket:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:::", # the SCO assembler doesn't seem to like our assembler files ... # SCO 5 - Ben Laurie <ben@algroup.co.uk> says the -O breaks the SCO cc. "sco5-cc", "cc:-belf::(unknown)::-lsocket -lnsl:${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:svr3-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)", "sco5-gcc", "gcc:-O3 -fomit-frame-pointer::(unknown)::-lsocket -lnsl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:svr3-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)", Loading TABLE +0 −27 Original line number Diff line number Diff line Loading @@ -3348,33 +3348,6 @@ $shared_extension = $ranlib = $arflags = *** sco3-gcc $cc = gcc $cflags = -O3 -fomit-frame-pointer -Dssize_t=int -DNO_SYS_UN_H $unistd = $thread_cflag = (unknown) $sys_id = $lflags = -lsocket $bn_ops = BN_LLONG DES_PTR DES_RISC1 DES_UNROLL RC4_INDEX MD2_INT $cpuid_obj = $bn_obj = $des_obj = $aes_obj = $bf_obj = $md5_obj = $sha1_obj = $cast_obj = $rc4_obj = $rmd160_obj = $rc5_obj = $dso_scheme = $shared_target= $shared_cflag = $shared_ldflag = $shared_extension = $ranlib = $arflags = *** sco5-cc $cc = cc $cflags = -belf Loading config +6 −4 Original line number Diff line number Diff line Loading @@ -660,7 +660,9 @@ case "$GUESSOS" in sparc64-*-*bsd*) OUT="BSD-sparc64" ;; ia64-*-*bsd*) OUT="BSD-ia64" ;; amd64-*-*bsd*) OUT="BSD-x86_64" ;; *86*-*-*bsd*) case "`(file -L /usr/lib/libc.so.*) 2>/dev/null`" in *86*-*-*bsd*) # assume highest libc.so.* version is the one in effect libc=`(ls /usr/lib/libc.so.* /lib/libc.so.* | tail -1) 2>/dev/null` case "`(file $libc) 2>/dev/null`" in *ELF*) OUT="BSD-x86-elf" ;; *) OUT="BSD-x86"; options="$options no-sse2" ;; esac ;; Loading @@ -675,9 +677,9 @@ case "$GUESSOS" in OUT="OpenUNIX-8" fi ;; *-*-[Uu]nix[Ww]are7) OUT="unixware-7" ;; *-*-[Uu]nix[Ww]are20*) OUT="unixware-2.0" ;; *-*-[Uu]nix[Ww]are21*) OUT="unixware-2.1" ;; *-*-[Uu]nix[Ww]are7) OUT="unixware-7; options="$options no-sse2" ;; *-*-[Uu]nix[Ww]are20*) OUT="unixware-2.0"; options="$options no-sse2 no-sha512" ;; *-*-[Uu]nix[Ww]are21*) OUT="unixware-2.1"; options="$options no-sse2 no-sha512" ;; *-*-vos) options="$options no-threads no-shared no-asm no-dso" EXE=".pm" Loading Loading
Configure +0 −1 Original line number Diff line number Diff line Loading @@ -400,7 +400,6 @@ my %table=( "unixware-7-gcc","gcc:-DL_ENDIAN -DFILIO_H -O3 -fomit-frame-pointer -m486 -Wall::-D_REENTRANT::-lsocket -lnsl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:gnu-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)", "OpenUNIX-8","cc:-O -DFILIO_H -Kalloca::-Kthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}:${x86_elf_asm}:dlfcn:svr5-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)", "OpenUNIX-8-gcc","gcc:-O -DFILIO_H -fomit-frame-pointer::-pthread::-lsocket -lnsl:BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}:${x86_elf_asm}:dlfcn:svr5-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)", "sco3-gcc", "gcc:-O3 -fomit-frame-pointer -Dssize_t=int -DNO_SYS_UN_H::(unknown)::-lsocket:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:::", # the SCO assembler doesn't seem to like our assembler files ... # SCO 5 - Ben Laurie <ben@algroup.co.uk> says the -O breaks the SCO cc. "sco5-cc", "cc:-belf::(unknown)::-lsocket -lnsl:${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:svr3-shared:-Kpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)", "sco5-gcc", "gcc:-O3 -fomit-frame-pointer::(unknown)::-lsocket -lnsl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:svr3-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)", Loading
TABLE +0 −27 Original line number Diff line number Diff line Loading @@ -3348,33 +3348,6 @@ $shared_extension = $ranlib = $arflags = *** sco3-gcc $cc = gcc $cflags = -O3 -fomit-frame-pointer -Dssize_t=int -DNO_SYS_UN_H $unistd = $thread_cflag = (unknown) $sys_id = $lflags = -lsocket $bn_ops = BN_LLONG DES_PTR DES_RISC1 DES_UNROLL RC4_INDEX MD2_INT $cpuid_obj = $bn_obj = $des_obj = $aes_obj = $bf_obj = $md5_obj = $sha1_obj = $cast_obj = $rc4_obj = $rmd160_obj = $rc5_obj = $dso_scheme = $shared_target= $shared_cflag = $shared_ldflag = $shared_extension = $ranlib = $arflags = *** sco5-cc $cc = cc $cflags = -belf Loading
config +6 −4 Original line number Diff line number Diff line Loading @@ -660,7 +660,9 @@ case "$GUESSOS" in sparc64-*-*bsd*) OUT="BSD-sparc64" ;; ia64-*-*bsd*) OUT="BSD-ia64" ;; amd64-*-*bsd*) OUT="BSD-x86_64" ;; *86*-*-*bsd*) case "`(file -L /usr/lib/libc.so.*) 2>/dev/null`" in *86*-*-*bsd*) # assume highest libc.so.* version is the one in effect libc=`(ls /usr/lib/libc.so.* /lib/libc.so.* | tail -1) 2>/dev/null` case "`(file $libc) 2>/dev/null`" in *ELF*) OUT="BSD-x86-elf" ;; *) OUT="BSD-x86"; options="$options no-sse2" ;; esac ;; Loading @@ -675,9 +677,9 @@ case "$GUESSOS" in OUT="OpenUNIX-8" fi ;; *-*-[Uu]nix[Ww]are7) OUT="unixware-7" ;; *-*-[Uu]nix[Ww]are20*) OUT="unixware-2.0" ;; *-*-[Uu]nix[Ww]are21*) OUT="unixware-2.1" ;; *-*-[Uu]nix[Ww]are7) OUT="unixware-7; options="$options no-sse2" ;; *-*-[Uu]nix[Ww]are20*) OUT="unixware-2.0"; options="$options no-sse2 no-sha512" ;; *-*-[Uu]nix[Ww]are21*) OUT="unixware-2.1"; options="$options no-sse2 no-sha512" ;; *-*-vos) options="$options no-threads no-shared no-asm no-dso" EXE=".pm" Loading