/* crypto/bn/bn_exp.c */
/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
 * All rights reserved.
 *
 * This package is an SSL implementation written
 * by Eric Young (eay@cryptsoft.com).
 * The implementation was written so as to conform with Netscapes SSL.
 * 
 * This library is free for commercial and non-commercial use as long as
 * the following conditions are aheared to.  The following conditions
 * apply to all code found in this distribution, be it the RC4, RSA,
 * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
 * included with this distribution is covered by the same copyright terms
 * except that the holder is Tim Hudson (tjh@cryptsoft.com).
 * 
 * Copyright remains Eric Young's, and as such any Copyright notices in
 * the code are not to be removed.
 * If this package is used in a product, Eric Young should be given attribution
 * as the author of the parts of the library used.
 * This can be in the form of a textual message at program startup or
 * in documentation (online or textual) provided with the package.
 * 
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *    "This product includes cryptographic software written by
 *     Eric Young (eay@cryptsoft.com)"
 *    The word 'cryptographic' can be left out if the rouines from the library
 *    being used are not cryptographic related :-).
 * 4. If you include any Windows specific code (or a derivative thereof) from 
 *    the apps directory (application code) you must include an acknowledgement:
 *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
 * 
 * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 * 
 * The licence and distribution terms for any publically available version or
 * derivative of this code cannot be changed.  i.e. this code cannot simply be
 * copied and put under another distribution licence
 * [including the GNU Public Licence.]
 */
/* ====================================================================
 * Copyright (c) 1998-2005 The OpenSSL Project.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer. 
 *
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 *
 * 3. All advertising materials mentioning features or use of this
 *    software must display the following acknowledgment:
 *    "This product includes software developed by the OpenSSL Project
 *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
 *
 * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
 *    endorse or promote products derived from this software without
 *    prior written permission. For written permission, please contact
 *    openssl-core@openssl.org.
 *
 * 5. Products derived from this software may not be called "OpenSSL"
 *    nor may "OpenSSL" appear in their names without prior written
 *    permission of the OpenSSL Project.
 *
 * 6. Redistributions of any form whatsoever must retain the following
 *    acknowledgment:
 *    "This product includes software developed by the OpenSSL Project
 *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
 *
 * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
 * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
 * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
 * OF THE POSSIBILITY OF SUCH DAMAGE.
 * ====================================================================
 *
 * This product includes cryptographic software written by Eric Young
 * (eay@cryptsoft.com).  This product includes software written by Tim
 * Hudson (tjh@cryptsoft.com).
 *
 */



#include "cryptlib.h"
#include "bn_lcl.h"

#include <stdlib.h>
#ifdef _WIN32
# include <malloc.h>
# ifndef alloca
#  define alloca _alloca
# endif
#elif defined(__GNUC__)
# ifndef alloca
#  define alloca(s) __builtin_alloca((s))
# endif
#elif defined(__sun)
# include <alloca.h>
#endif

#undef RSAZ_ENABLED
#if defined(OPENSSL_BN_ASM_MONT) && \
	(defined(__x86_64) || defined(__x86_64__) || \
	 defined(_M_AMD64) || defined(_M_X64))
# include "rsaz_exp.h"
# define RSAZ_ENABLED
#endif

#undef SPARC_T4_MONT
#if defined(OPENSSL_BN_ASM_MONT) && (defined(__sparc__) || defined(__sparc))
# include "sparc_arch.h"
extern unsigned int OPENSSL_sparcv9cap_P[];
# define SPARC_T4_MONT
#endif

/* maximum precomputation table size for *variable* sliding windows */
#define TABLE_SIZE	32

/* this one works - simple but works */
int BN_exp(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, BN_CTX *ctx)
	{
	int i,bits,ret=0;
	BIGNUM *v,*rr;

	if (BN_get_flags(p, BN_FLG_CONSTTIME) != 0)
		{
		/* BN_FLG_CONSTTIME only supported by BN_mod_exp_mont() */
		BNerr(BN_F_BN_EXP,ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED);
		return -1;
		}

	BN_CTX_start(ctx);
	if ((r == a) || (r == p))
		rr = BN_CTX_get(ctx);
	else
		rr = r;
	v = BN_CTX_get(ctx);
	if (rr == NULL || v == NULL) goto err;

	if (BN_copy(v,a) == NULL) goto err;
	bits=BN_num_bits(p);

	if (BN_is_odd(p))
		{ if (BN_copy(rr,a) == NULL) goto err; }
	else	{ if (!BN_one(rr)) goto err; }

	for (i=1; i<bits; i++)
		{
		if (!BN_sqr(v,v,ctx)) goto err;
		if (BN_is_bit_set(p,i))
			{
			if (!BN_mul(rr,rr,v,ctx)) goto err;
			}
		}
	ret=1;
err:
	if (r != rr) BN_copy(r,rr);
	BN_CTX_end(ctx);
	bn_check_top(r);
	return(ret);
	}


int BN_mod_exp(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, const BIGNUM *m,
	       BN_CTX *ctx)
	{
	int ret;

	bn_check_top(a);
	bn_check_top(p);
	bn_check_top(m);

	/* For even modulus  m = 2^k*m_odd,  it might make sense to compute
	 * a^p mod m_odd  and  a^p mod 2^k  separately (with Montgomery
	 * exponentiation for the odd part), using appropriate exponent
	 * reductions, and combine the results using the CRT.
	 *
	 * For now, we use Montgomery only if the modulus is odd; otherwise,
	 * exponentiation using the reciprocal-based quick remaindering
	 * algorithm is used.
	 *
	 * (Timing obtained with expspeed.c [computations  a^p mod m
	 * where  a, p, m  are of the same length: 256, 512, 1024, 2048,
	 * 4096, 8192 bits], compared to the running time of the
	 * standard algorithm:
	 *
	 *   BN_mod_exp_mont   33 .. 40 %  [AMD K6-2, Linux, debug configuration]
         *                     55 .. 77 %  [UltraSparc processor, but
	 *                                  debug-solaris-sparcv8-gcc conf.]
	 * 
	 *   BN_mod_exp_recp   50 .. 70 %  [AMD K6-2, Linux, debug configuration]
	 *                     62 .. 118 % [UltraSparc, debug-solaris-sparcv8-gcc]
	 *
	 * On the Sparc, BN_mod_exp_recp was faster than BN_mod_exp_mont
	 * at 2048 and more bits, but at 512 and 1024 bits, it was
	 * slower even than the standard algorithm!
	 *
	 * "Real" timings [linux-elf, solaris-sparcv9-gcc configurations]
	 * should be obtained when the new Montgomery reduction code
	 * has been integrated into OpenSSL.)
	 */

#define MONT_MUL_MOD
#define MONT_EXP_WORD
#define RECP_MUL_MOD

#ifdef MONT_MUL_MOD
	/* I have finally been able to take out this pre-condition of
	 * the top bit being set.  It was caused by an error in BN_div
	 * with negatives.  There was also another problem when for a^b%m
	 * a >= m.  eay 07-May-97 */
/*	if ((m->d[m->top-1]&BN_TBIT) && BN_is_odd(m)) */

	if (BN_is_odd(m))
		{
#  ifdef MONT_EXP_WORD
		if (a->top == 1 && !a->neg && (BN_get_flags(p, BN_FLG_CONSTTIME) == 0))
			{
			BN_ULONG A = a->d[0];
			ret=BN_mod_exp_mont_word(r,A,p,m,ctx,NULL);
			}
		else
#  endif
			ret=BN_mod_exp_mont(r,a,p,m,ctx,NULL);
		}
	else
#endif
#ifdef RECP_MUL_MOD
		{ ret=BN_mod_exp_recp(r,a,p,m,ctx); }
#else
		{ ret=BN_mod_exp_simple(r,a,p,m,ctx); }
#endif

	bn_check_top(r);
	return(ret);
	}


int BN_mod_exp_recp(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
		    const BIGNUM *m, BN_CTX *ctx)
	{
	int i,j,bits,ret=0,wstart,wend,window,wvalue;
	int start=1;
	BIGNUM *aa;
	/* Table of variables obtained from 'ctx' */
	BIGNUM *val[TABLE_SIZE];
	BN_RECP_CTX recp;

	if (BN_get_flags(p, BN_FLG_CONSTTIME) != 0)
		{
		/* BN_FLG_CONSTTIME only supported by BN_mod_exp_mont() */
		BNerr(BN_F_BN_MOD_EXP_RECP,ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED);
		return -1;
		}

	bits=BN_num_bits(p);

	if (bits == 0)
		{
		ret = BN_one(r);
		return ret;
		}

	BN_CTX_start(ctx);
	aa = BN_CTX_get(ctx);
	val[0] = BN_CTX_get(ctx);
	if(!aa || !val[0]) goto err;

	BN_RECP_CTX_init(&recp);
	if (m->neg)
		{
		/* ignore sign of 'm' */
		if (!BN_copy(aa, m)) goto err;
		aa->neg = 0;
		if (BN_RECP_CTX_set(&recp,aa,ctx) <= 0) goto err;
		}
	else
		{
		if (BN_RECP_CTX_set(&recp,m,ctx) <= 0) goto err;
		}

	if (!BN_nnmod(val[0],a,m,ctx)) goto err;		/* 1 */
	if (BN_is_zero(val[0]))
		{
		BN_zero(r);
		ret = 1;
		goto err;
		}

	window = BN_window_bits_for_exponent_size(bits);
	if (window > 1)
		{
		if (!BN_mod_mul_reciprocal(aa,val[0],val[0],&recp,ctx))
			goto err;				/* 2 */
		j=1<<(window-1);
		for (i=1; i<j; i++)
			{
			if(((val[i] = BN_CTX_get(ctx)) == NULL) ||
					!BN_mod_mul_reciprocal(val[i],val[i-1],
						aa,&recp,ctx))
				goto err;
			}
		}
		
	start=1;	/* This is used to avoid multiplication etc
			 * when there is only the value '1' in the
			 * buffer. */
	wvalue=0;	/* The 'value' of the window */
	wstart=bits-1;	/* The top bit of the window */
	wend=0;		/* The bottom bit of the window */

	if (!BN_one(r)) goto err;

	for (;;)
		{
		if (BN_is_bit_set(p,wstart) == 0)
			{
			if (!start)
				if (!BN_mod_mul_reciprocal(r,r,r,&recp,ctx))
				goto err;
			if (wstart == 0) break;
			wstart--;
			continue;
			}
		/* We now have wstart on a 'set' bit, we now need to work out
		 * how bit a window to do.  To do this we need to scan
		 * forward until the last set bit before the end of the
		 * window */
		j=wstart;
		wvalue=1;
		wend=0;
		for (i=1; i<window; i++)
			{
			if (wstart-i < 0) break;
			if (BN_is_bit_set(p,wstart-i))
				{
				wvalue<<=(i-wend);
				wvalue|=1;
				wend=i;
				}
			}

		/* wend is the size of the current window */
		j=wend+1;
		/* add the 'bytes above' */
		if (!start)
			for (i=0; i<j; i++)
				{
				if (!BN_mod_mul_reciprocal(r,r,r,&recp,ctx))
					goto err;
				}
		
		/* wvalue will be an odd number < 2^window */
		if (!BN_mod_mul_reciprocal(r,r,val[wvalue>>1],&recp,ctx))
			goto err;

		/* move the 'window' down further */
		wstart-=wend+1;
		wvalue=0;
		start=0;
		if (wstart < 0) break;
		}
	ret=1;
err:
	BN_CTX_end(ctx);
	BN_RECP_CTX_free(&recp);
	bn_check_top(r);
	return(ret);
	}


int BN_mod_exp_mont(BIGNUM *rr, const BIGNUM *a, const BIGNUM *p,
		    const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *in_mont)
	{
	int i,j,bits,ret=0,wstart,wend,window,wvalue;
	int start=1;
	BIGNUM *d,*r;
	const BIGNUM *aa;
	/* Table of variables obtained from 'ctx' */
	BIGNUM *val[TABLE_SIZE];
	BN_MONT_CTX *mont=NULL;

	if (BN_get_flags(p, BN_FLG_CONSTTIME) != 0)
		{
		return BN_mod_exp_mont_consttime(rr, a, p, m, ctx, in_mont);
		}

	bn_check_top(a);
	bn_check_top(p);
	bn_check_top(m);

	if (!BN_is_odd(m))
		{
		BNerr(BN_F_BN_MOD_EXP_MONT,BN_R_CALLED_WITH_EVEN_MODULUS);
		return(0);
		}
	bits=BN_num_bits(p);
	if (bits == 0)
		{
		ret = BN_one(rr);
		return ret;
		}

	BN_CTX_start(ctx);
	d = BN_CTX_get(ctx);
	r = BN_CTX_get(ctx);
	val[0] = BN_CTX_get(ctx);
	if (!d || !r || !val[0]) goto err;

	/* If this is not done, things will break in the montgomery
	 * part */

	if (in_mont != NULL)
		mont=in_mont;
	else
		{
		if ((mont=BN_MONT_CTX_new()) == NULL) goto err;
		if (!BN_MONT_CTX_set(mont,m,ctx)) goto err;
		}

	if (a->neg || BN_ucmp(a,m) >= 0)
		{
		if (!BN_nnmod(val[0],a,m,ctx))
			goto err;
		aa= val[0];
		}
	else
		aa=a;
	if (BN_is_zero(aa))
		{
		BN_zero(rr);
		ret = 1;
		goto err;
		}
	if (!BN_to_montgomery(val[0],aa,mont,ctx)) goto err; /* 1 */

	window = BN_window_bits_for_exponent_size(bits);
	if (window > 1)
		{
		if (!BN_mod_mul_montgomery(d,val[0],val[0],mont,ctx)) goto err; /* 2 */
		j=1<<(window-1);
		for (i=1; i<j; i++)
			{
			if(((val[i] = BN_CTX_get(ctx)) == NULL) ||
					!BN_mod_mul_montgomery(val[i],val[i-1],
						d,mont,ctx))
				goto err;
			}
		}

	start=1;	/* This is used to avoid multiplication etc
			 * when there is only the value '1' in the
			 * buffer. */
	wvalue=0;	/* The 'value' of the window */
	wstart=bits-1;	/* The top bit of the window */
	wend=0;		/* The bottom bit of the window */

#if 1	/* by Shay Gueron's suggestion */
	j = m->top;	/* borrow j */
	if (m->d[j-1] & (((BN_ULONG)1)<<(BN_BITS2-1)))
		{
		if (bn_wexpand(r,j) == NULL) goto err;
		/* 2^(top*BN_BITS2) - m */
		r->d[0] = (0-m->d[0])&BN_MASK2;
		for(i=1;i<j;i++) r->d[i] = (~m->d[i])&BN_MASK2;
		r->top = j;
		/* Upper words will be zero if the corresponding words of 'm'
		 * were 0xfff[...], so decrement r->top accordingly. */
		bn_correct_top(r);
		}
	else
#endif
	if (!BN_to_montgomery(r,BN_value_one(),mont,ctx)) goto err;
	for (;;)
		{
		if (BN_is_bit_set(p,wstart) == 0)
			{
			if (!start)
				{
				if (!BN_mod_mul_montgomery(r,r,r,mont,ctx))
				goto err;
				}
			if (wstart == 0) break;
			wstart--;
			continue;
			}
		/* We now have wstart on a 'set' bit, we now need to work out
		 * how bit a window to do.  To do this we need to scan
		 * forward until the last set bit before the end of the
		 * window */
		j=wstart;
		wvalue=1;
		wend=0;
		for (i=1; i<window; i++)
			{
			if (wstart-i < 0) break;
			if (BN_is_bit_set(p,wstart-i))
				{
				wvalue<<=(i-wend);
				wvalue|=1;
				wend=i;
				}
			}

		/* wend is the size of the current window */
		j=wend+1;
		/* add the 'bytes above' */
		if (!start)
			for (i=0; i<j; i++)
				{
				if (!BN_mod_mul_montgomery(r,r,r,mont,ctx))
					goto err;
				}
		
		/* wvalue will be an odd number < 2^window */
		if (!BN_mod_mul_montgomery(r,r,val[wvalue>>1],mont,ctx))
			goto err;

		/* move the 'window' down further */
		wstart-=wend+1;
		wvalue=0;
		start=0;
		if (wstart < 0) break;
		}
#if defined(SPARC_T4_MONT)
	if (OPENSSL_sparcv9cap_P[0]&(SPARCV9_VIS3|SPARCV9_PREFER_FPU))
		{
		j = mont->N.top;	/* borrow j */
		val[0]->d[0] = 1;	/* borrow val[0] */
		for (i=1;i<j;i++) val[0]->d[i] = 0;
		val[0]->top = j;
		if (!BN_mod_mul_montgomery(rr,r,val[0],mont,ctx)) goto err;
		}
	else
#endif
	if (!BN_from_montgomery(rr,r,mont,ctx)) goto err;
	ret=1;
err:
	if ((in_mont == NULL) && (mont != NULL)) BN_MONT_CTX_free(mont);
	BN_CTX_end(ctx);
	bn_check_top(rr);
	return(ret);
	}

#if defined(SPARC_T4_MONT)
static BN_ULONG bn_get_bits(const BIGNUM *a, int bitpos)
	{
	BN_ULONG ret=0;
	int wordpos;

	wordpos = bitpos/BN_BITS2;
	bitpos %= BN_BITS2;
	if (wordpos>=0 && wordpos < a->top)
		{
		ret = a->d[wordpos]&BN_MASK2;
		if (bitpos)
			{
			ret >>= bitpos;
			if (++wordpos < a->top)
				ret |= a->d[wordpos]<<(BN_BITS2-bitpos);
			}
		}

	return ret&BN_MASK2;
}
#endif

/* BN_mod_exp_mont_consttime() stores the precomputed powers in a specific layout
 * so that accessing any of these table values shows the same access pattern as far
 * as cache lines are concerned.  The following functions are used to transfer a BIGNUM
 * from/to that table. */

static int MOD_EXP_CTIME_COPY_TO_PREBUF(const BIGNUM *b, int top, unsigned char *buf, int idx, int width)
	{
	size_t i, j;

	if (top > b->top)
		top = b->top; /* this works because 'buf' is explicitly zeroed */
	for (i = 0, j=idx; i < top * sizeof b->d[0]; i++, j+=width)
		{
		buf[j] = ((unsigned char*)b->d)[i];
		}

	return 1;
	}

static int MOD_EXP_CTIME_COPY_FROM_PREBUF(BIGNUM *b, int top, unsigned char *buf, int idx, int width)
	{
	size_t i, j;

	if (bn_wexpand(b, top) == NULL)
		return 0;

	for (i=0, j=idx; i < top * sizeof b->d[0]; i++, j+=width)
		{
		((unsigned char*)b->d)[i] = buf[j];
		}

	b->top = top;
	bn_correct_top(b);
	return 1;
	}	

/* Given a pointer value, compute the next address that is a cache line multiple. */
#define MOD_EXP_CTIME_ALIGN(x_) \
	((unsigned char*)(x_) + (MOD_EXP_CTIME_MIN_CACHE_LINE_WIDTH - (((size_t)(x_)) & (MOD_EXP_CTIME_MIN_CACHE_LINE_MASK))))

/* This variant of BN_mod_exp_mont() uses fixed windows and the special
 * precomputation memory layout to limit data-dependency to a minimum
 * to protect secret exponents (cf. the hyper-threading timing attacks
 * pointed out by Colin Percival,
 * http://www.daemonology.net/hyperthreading-considered-harmful/)
 */
int BN_mod_exp_mont_consttime(BIGNUM *rr, const BIGNUM *a, const BIGNUM *p,
		    const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *in_mont)
	{
	int i,bits,ret=0,window,wvalue;
	int top;
	BN_MONT_CTX *mont=NULL;

	int numPowers;
	unsigned char *powerbufFree=NULL;
	int powerbufLen = 0;
	unsigned char *powerbuf=NULL;
	BIGNUM tmp, am;
#if defined(SPARC_T4_MONT)
	unsigned int t4=0;
#endif

	bn_check_top(a);
	bn_check_top(p);
	bn_check_top(m);

	top = m->top;

	if (!(m->d[0] & 1))
		{
		BNerr(BN_F_BN_MOD_EXP_MONT_CONSTTIME,BN_R_CALLED_WITH_EVEN_MODULUS);
		return(0);
		}
	bits=BN_num_bits(p);
	if (bits == 0)
		{
		ret = BN_one(rr);
		return ret;
		}

	BN_CTX_start(ctx);

	/* Allocate a montgomery context if it was not supplied by the caller.
	 * If this is not done, things will break in the montgomery part.
 	 */
	if (in_mont != NULL)
		mont=in_mont;
	else
		{
		if ((mont=BN_MONT_CTX_new()) == NULL) goto err;
		if (!BN_MONT_CTX_set(mont,m,ctx)) goto err;
		}

#ifdef RSAZ_ENABLED
	/*
	 * If the size of the operands allow it, perform the optimized
	 * RSAZ exponentiation. For further information see
	 * crypto/bn/rsaz_exp.c and accompanying assembly modules.
	 */
	if ((16 == a->top) && (16 == p->top) && (BN_num_bits(m) == 1024)
	    && rsaz_avx2_eligible())
	    	{
		if (NULL == bn_wexpand(rr, 16)) goto err;
		RSAZ_1024_mod_exp_avx2(rr->d, a->d, p->d, m->d, mont->RR.d, mont->n0[0]);
		rr->top = 16;
		rr->neg = 0;
		bn_correct_top(rr);
		ret = 1;
		goto err;
		}
	else if ((8 == a->top) && (8 == p->top) && (BN_num_bits(m) == 512))
		{
		if (NULL == bn_wexpand(rr,8)) goto err;
		RSAZ_512_mod_exp(rr->d, a->d, p->d, m->d, mont->n0[0], mont->RR.d);
		rr->top = 8;
		rr->neg = 0;
		bn_correct_top(rr);
		ret = 1;
		goto err;
		}
#endif

	/* Get the window size to use with size of p. */
	window = BN_window_bits_for_ctime_exponent_size(bits);
#if defined(SPARC_T4_MONT)
	if (window>=5 && (top&15)==0 && top<=64 &&
	    (OPENSSL_sparcv9cap_P[1]&(CFR_MONTMUL|CFR_MONTSQR))==
	    			     (CFR_MONTMUL|CFR_MONTSQR) &&
	    (t4=OPENSSL_sparcv9cap_P[0]))
		window=5;
	else
#endif
#if defined(OPENSSL_BN_ASM_MONT5)
	if (window>=5)
		{
		window=5;	/* ~5% improvement for RSA2048 sign, and even for RSA4096 */
		if ((top&7)==0)	powerbufLen += 2*top*sizeof(m->d[0]);
		}
#endif
	(void)0;

	/* Allocate a buffer large enough to hold all of the pre-computed
	 * powers of am, am itself and tmp.
	 */
	numPowers = 1 << window;
	powerbufLen += sizeof(m->d[0])*(top*numPowers +
				((2*top)>numPowers?(2*top):numPowers));
#ifdef alloca
	if (powerbufLen < 3072)
		powerbufFree = alloca(powerbufLen+MOD_EXP_CTIME_MIN_CACHE_LINE_WIDTH);
	else
#endif
	if ((powerbufFree=(unsigned char*)OPENSSL_malloc(powerbufLen+MOD_EXP_CTIME_MIN_CACHE_LINE_WIDTH)) == NULL)
		goto err;
		
	powerbuf = MOD_EXP_CTIME_ALIGN(powerbufFree);
	memset(powerbuf, 0, powerbufLen);

#ifdef alloca
	if (powerbufLen < 3072)
		powerbufFree = NULL;
#endif

	/* lay down tmp and am right after powers table */
	tmp.d     = (BN_ULONG *)(powerbuf + sizeof(m->d[0])*top*numPowers);
	am.d      = tmp.d + top;
	tmp.top   = am.top  = 0;
	tmp.dmax  = am.dmax = top;
	tmp.neg   = am.neg  = 0;
	tmp.flags = am.flags = BN_FLG_STATIC_DATA;

	/* prepare a^0 in Montgomery domain */
#if 1	/* by Shay Gueron's suggestion */
	if (m->d[top-1] & (((BN_ULONG)1)<<(BN_BITS2-1)))
		{
		/* 2^(top*BN_BITS2) - m */
		tmp.d[0] = (0-m->d[0])&BN_MASK2;
		for (i=1;i<top;i++) tmp.d[i] = (~m->d[i])&BN_MASK2;
		tmp.top = top;
		}
	else
#endif
 	if (!BN_to_montgomery(&tmp,BN_value_one(),mont,ctx))	goto err;

	/* prepare a^1 in Montgomery domain */
	if (a->neg || BN_ucmp(a,m) >= 0)
		{
		if (!BN_mod(&am,a,m,ctx))			goto err;
		if (!BN_to_montgomery(&am,&am,mont,ctx))	goto err;
		}
	else	if (!BN_to_montgomery(&am,a,mont,ctx))		goto err;

#if defined(SPARC_T4_MONT)
    if (t4)
	{
	typedef int (*bn_pwr5_mont_f)(BN_ULONG *tp,const BN_ULONG *np,
			const BN_ULONG *n0,const void *table,int power,int bits);
	int bn_pwr5_mont_t4_8(BN_ULONG *tp,const BN_ULONG *np,
			const BN_ULONG *n0,const void *table,int power,int bits);
	int bn_pwr5_mont_t4_16(BN_ULONG *tp,const BN_ULONG *np,
			const BN_ULONG *n0,const void *table,int power,int bits);
	int bn_pwr5_mont_t4_24(BN_ULONG *tp,const BN_ULONG *np,
			const BN_ULONG *n0,const void *table,int power,int bits);
	int bn_pwr5_mont_t4_32(BN_ULONG *tp,const BN_ULONG *np,
			const BN_ULONG *n0,const void *table,int power,int bits);
	static const bn_pwr5_mont_f pwr5_funcs[4] = {
			bn_pwr5_mont_t4_8,	bn_pwr5_mont_t4_16,
			bn_pwr5_mont_t4_24,	bn_pwr5_mont_t4_32 };
	bn_pwr5_mont_f pwr5_worker = pwr5_funcs[top/16-1];

	typedef int (*bn_mul_mont_f)(BN_ULONG *rp,const BN_ULONG *ap,
			const void *bp,const BN_ULONG *np,const BN_ULONG *n0);
	int bn_mul_mont_t4_8(BN_ULONG *rp,const BN_ULONG *ap,
			const void *bp,const BN_ULONG *np,const BN_ULONG *n0);
	int bn_mul_mont_t4_16(BN_ULONG *rp,const BN_ULONG *ap,
			const void *bp,const BN_ULONG *np,const BN_ULONG *n0);
	int bn_mul_mont_t4_24(BN_ULONG *rp,const BN_ULONG *ap,
			const void *bp,const BN_ULONG *np,const BN_ULONG *n0);
	int bn_mul_mont_t4_32(BN_ULONG *rp,const BN_ULONG *ap,
			const void *bp,const BN_ULONG *np,const BN_ULONG *n0);
	static const bn_mul_mont_f mul_funcs[4] = {
			bn_mul_mont_t4_8,	bn_mul_mont_t4_16,
			bn_mul_mont_t4_24,	bn_mul_mont_t4_32 };
	bn_mul_mont_f mul_worker = mul_funcs[top/16-1];

	void bn_mul_mont_vis3(BN_ULONG *rp,const BN_ULONG *ap,
			const void *bp,const BN_ULONG *np,
			const BN_ULONG *n0,int num);
	void bn_mul_mont_t4(BN_ULONG *rp,const BN_ULONG *ap,
			const void *bp,const BN_ULONG *np,
			const BN_ULONG *n0,int num);
	void bn_mul_mont_gather5_t4(BN_ULONG *rp,const BN_ULONG *ap,
			const void *table,const BN_ULONG *np,
			const BN_ULONG *n0,int num,int power);
	void bn_flip_n_scatter5_t4(const BN_ULONG *inp,size_t num,
			void *table,size_t power);
	void bn_gather5_t4(BN_ULONG *out,size_t num,
			void *table,size_t power);
	void bn_flip_t4(BN_ULONG *dst,BN_ULONG *src,size_t num);

	BN_ULONG *np=mont->N.d, *n0=mont->n0;
	int stride = 5*(6-(top/16-1));	/* multiple of 5, but less than 32 */

	/* BN_to_montgomery can contaminate words above .top
	 * [in BN_DEBUG[_DEBUG] build]... */
	for (i=am.top; i<top; i++)	am.d[i]=0;
	for (i=tmp.top; i<top; i++)	tmp.d[i]=0;

	bn_flip_n_scatter5_t4(tmp.d,top,powerbuf,0);
	bn_flip_n_scatter5_t4(am.d,top,powerbuf,1);
	if (!(*mul_worker)(tmp.d,am.d,am.d,np,n0) &&
	    !(*mul_worker)(tmp.d,am.d,am.d,np,n0))
		bn_mul_mont_vis3(tmp.d,am.d,am.d,np,n0,top);
	bn_flip_n_scatter5_t4(tmp.d,top,powerbuf,2);

	for (i=3; i<32; i++)
		{
		/* Calculate a^i = a^(i-1) * a */
		if (!(*mul_worker)(tmp.d,tmp.d,am.d,np,n0) &&
		    !(*mul_worker)(tmp.d,tmp.d,am.d,np,n0))
			bn_mul_mont_vis3(tmp.d,tmp.d,am.d,np,n0,top);
		bn_flip_n_scatter5_t4(tmp.d,top,powerbuf,i);
		}

	/* switch to 64-bit domain */ 
	np = alloca(top*sizeof(BN_ULONG));
	top /= 2;
	bn_flip_t4(np,mont->N.d,top);

	bits--;
	for (wvalue=0, i=bits%5; i>=0; i--,bits--)
		wvalue = (wvalue<<1)+BN_is_bit_set(p,bits);
	bn_gather5_t4(tmp.d,top,powerbuf,wvalue);

	/* Scan the exponent one window at a time starting from the most
	 * significant bits.
	 */
	while (bits >= 0)
		{
		if (bits < stride) stride = bits+1;
		bits -= stride;
		wvalue = bn_get_bits(p,bits+1);

		if ((*pwr5_worker)(tmp.d,np,n0,powerbuf,wvalue,stride)) continue;
		/* retry once and fall back */
		if ((*pwr5_worker)(tmp.d,np,n0,powerbuf,wvalue,stride)) continue;

		bits += stride-5;
		wvalue >>= stride-5;
		wvalue &= 31;
		bn_mul_mont_t4(tmp.d,tmp.d,tmp.d,np,n0,top);
		bn_mul_mont_t4(tmp.d,tmp.d,tmp.d,np,n0,top);
		bn_mul_mont_t4(tmp.d,tmp.d,tmp.d,np,n0,top);
		bn_mul_mont_t4(tmp.d,tmp.d,tmp.d,np,n0,top);
		bn_mul_mont_t4(tmp.d,tmp.d,tmp.d,np,n0,top);
		bn_mul_mont_gather5_t4(tmp.d,tmp.d,powerbuf,np,n0,top,wvalue);
		}

	bn_flip_t4(tmp.d,tmp.d,top);
	top *= 2;
	/* back to 32-bit domain */
	tmp.top=top;
	bn_correct_top(&tmp);
	OPENSSL_cleanse(np,top*sizeof(BN_ULONG));
	}
    else
#endif
#if defined(OPENSSL_BN_ASM_MONT5)
    /* This optimization uses ideas from http://eprint.iacr.org/2011/239,
     * specifically optimization of cache-timing attack countermeasures
     * and pre-computation optimization. */

    /* Dedicated window==4 case improves 512-bit RSA sign by ~15%, but as
     * 512-bit RSA is hardly relevant, we omit it to spare size... */ 
    if (window==5 && top>1)
	{
	void bn_mul_mont_gather5(BN_ULONG *rp,const BN_ULONG *ap,
			const void *table,const BN_ULONG *np,
			const BN_ULONG *n0,int num,int power);
	void bn_scatter5(const BN_ULONG *inp,size_t num,
			void *table,size_t power);
	void bn_gather5(BN_ULONG *out,size_t num,
			void *table,size_t power);
	void bn_power5(BN_ULONG *rp,const BN_ULONG *ap,
			const void *table,const BN_ULONG *np,
			const BN_ULONG *n0,int num,int power);
	int bn_get_bits5(const BN_ULONG *ap,int off);
	int bn_from_montgomery(BN_ULONG *rp,const BN_ULONG *ap,
			const BN_ULONG *not_used,const BN_ULONG *np,
			const BN_ULONG *n0,int num);

	BN_ULONG *np=mont->N.d, *n0=mont->n0, *np2;

	/* BN_to_montgomery can contaminate words above .top
	 * [in BN_DEBUG[_DEBUG] build]... */
	for (i=am.top; i<top; i++)	am.d[i]=0;
	for (i=tmp.top; i<top; i++)	tmp.d[i]=0;

	if (top&7)
		np2 = np;
	else
		for (np2=am.d+top,i=0; i<top; i++) np2[2*i]=np[i];

	bn_scatter5(tmp.d,top,powerbuf,0);
	bn_scatter5(am.d,am.top,powerbuf,1);
	bn_mul_mont(tmp.d,am.d,am.d,np,n0,top);
	bn_scatter5(tmp.d,top,powerbuf,2);

#if 0
	for (i=3; i<32; i++)
		{
		/* Calculate a^i = a^(i-1) * a */
		bn_mul_mont_gather5(tmp.d,am.d,powerbuf,np2,n0,top,i-1);
		bn_scatter5(tmp.d,top,powerbuf,i);
		}
#else
	/* same as above, but uses squaring for 1/2 of operations */
	for (i=4; i<32; i*=2)
		{
		bn_mul_mont(tmp.d,tmp.d,tmp.d,np,n0,top);
		bn_scatter5(tmp.d,top,powerbuf,i);
		}
	for (i=3; i<8; i+=2)
		{
		int j;
		bn_mul_mont_gather5(tmp.d,am.d,powerbuf,np2,n0,top,i-1);
		bn_scatter5(tmp.d,top,powerbuf,i);
		for (j=2*i; j<32; j*=2)
			{
			bn_mul_mont(tmp.d,tmp.d,tmp.d,np,n0,top);
			bn_scatter5(tmp.d,top,powerbuf,j);
			}
		}
	for (; i<16; i+=2)
		{
		bn_mul_mont_gather5(tmp.d,am.d,powerbuf,np2,n0,top,i-1);
		bn_scatter5(tmp.d,top,powerbuf,i);
		bn_mul_mont(tmp.d,tmp.d,tmp.d,np,n0,top);
		bn_scatter5(tmp.d,top,powerbuf,2*i);
		}
	for (; i<32; i+=2)
		{
		bn_mul_mont_gather5(tmp.d,am.d,powerbuf,np2,n0,top,i-1);
		bn_scatter5(tmp.d,top,powerbuf,i);
		}
#endif
	bits--;
	for (wvalue=0, i=bits%5; i>=0; i--,bits--)
		wvalue = (wvalue<<1)+BN_is_bit_set(p,bits);
	bn_gather5(tmp.d,top,powerbuf,wvalue);

	/* Scan the exponent one window at a time starting from the most
	 * significant bits.
	 */
	if (top&7)
	    while (bits >= 0)
		{
		for (wvalue=0, i=0; i<5; i++,bits--)
			wvalue = (wvalue<<1)+BN_is_bit_set(p,bits);

		bn_mul_mont(tmp.d,tmp.d,tmp.d,np,n0,top);
		bn_mul_mont(tmp.d,tmp.d,tmp.d,np,n0,top);
		bn_mul_mont(tmp.d,tmp.d,tmp.d,np,n0,top);
		bn_mul_mont(tmp.d,tmp.d,tmp.d,np,n0,top);
		bn_mul_mont(tmp.d,tmp.d,tmp.d,np,n0,top);
		bn_mul_mont_gather5(tmp.d,tmp.d,powerbuf,np,n0,top,wvalue);
		}
	else
	    {
	    while (bits >= 0)
		{
		wvalue = bn_get_bits5(p->d,bits-4);
		bits-=5;
		bn_power5(tmp.d,tmp.d,powerbuf,np2,n0,top,wvalue);
		}
	    }

	ret=bn_from_montgomery(tmp.d,tmp.d,NULL,np2,n0,top);
	tmp.top=top;
	bn_correct_top(&tmp);
	if (ret)
		{
		if (!BN_copy(rr,&tmp)) ret=0;
		goto err; /* non-zero ret means it's not error */
		}
	}
    else
#endif
	{
	if (!MOD_EXP_CTIME_COPY_TO_PREBUF(&tmp, top, powerbuf, 0, numPowers)) goto err;
	if (!MOD_EXP_CTIME_COPY_TO_PREBUF(&am,  top, powerbuf, 1, numPowers)) goto err;

	/* If the window size is greater than 1, then calculate
	 * val[i=2..2^winsize-1]. Powers are computed as a*a^(i-1)
	 * (even powers could instead be computed as (a^(i/2))^2
	 * to use the slight performance advantage of sqr over mul).
	 */
	if (window > 1)
		{
		if (!BN_mod_mul_montgomery(&tmp,&am,&am,mont,ctx))	goto err;
		if (!MOD_EXP_CTIME_COPY_TO_PREBUF(&tmp, top, powerbuf, 2, numPowers)) goto err;
		for (i=3; i<numPowers; i++)
			{
			/* Calculate a^i = a^(i-1) * a */
			if (!BN_mod_mul_montgomery(&tmp,&am,&tmp,mont,ctx))
				goto err;
			if (!MOD_EXP_CTIME_COPY_TO_PREBUF(&tmp, top, powerbuf, i, numPowers)) goto err;
			}
		}

	bits--;
	for (wvalue=0, i=bits%window; i>=0; i--,bits--)
		wvalue = (wvalue<<1)+BN_is_bit_set(p,bits);
	if (!MOD_EXP_CTIME_COPY_FROM_PREBUF(&tmp,top,powerbuf,wvalue,numPowers)) goto err;
 
	/* Scan the exponent one window at a time starting from the most
	 * significant bits.
	 */
 	while (bits >= 0)
  		{
 		wvalue=0; /* The 'value' of the window */
 		
 		/* Scan the window, squaring the result as we go */
 		for (i=0; i<window; i++,bits--)
 			{
			if (!BN_mod_mul_montgomery(&tmp,&tmp,&tmp,mont,ctx))	goto err;
			wvalue = (wvalue<<1)+BN_is_bit_set(p,bits);
  			}
 		
		/* Fetch the appropriate pre-computed value from the pre-buf */
		if (!MOD_EXP_CTIME_COPY_FROM_PREBUF(&am, top, powerbuf, wvalue, numPowers)) goto err;

 		/* Multiply the result into the intermediate result */
 		if (!BN_mod_mul_montgomery(&tmp,&tmp,&am,mont,ctx)) goto err;
  		}
	}

 	/* Convert the final result from montgomery to standard format */
#if defined(SPARC_T4_MONT)
	if (OPENSSL_sparcv9cap_P[0]&(SPARCV9_VIS3|SPARCV9_PREFER_FPU))
		{
		am.d[0] = 1;	/* borrow am */
		for (i=1;i<top;i++) am.d[i] = 0;
		if (!BN_mod_mul_montgomery(rr,&tmp,&am,mont,ctx)) goto err;
		}
	else
#endif
	if (!BN_from_montgomery(rr,&tmp,mont,ctx)) goto err;
	ret=1;
err:
	if ((in_mont == NULL) && (mont != NULL)) BN_MONT_CTX_free(mont);
	if (powerbuf!=NULL)
		{
		OPENSSL_cleanse(powerbuf,powerbufLen);
		if (powerbufFree) OPENSSL_free(powerbufFree);
		}
	BN_CTX_end(ctx);
	return(ret);
	}

int BN_mod_exp_mont_word(BIGNUM *rr, BN_ULONG a, const BIGNUM *p,
                         const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *in_mont)
	{
	BN_MONT_CTX *mont = NULL;
	int b, bits, ret=0;
	int r_is_one;
	BN_ULONG w, next_w;
	BIGNUM *d, *r, *t;
	BIGNUM *swap_tmp;
#define BN_MOD_MUL_WORD(r, w, m) \
		(BN_mul_word(r, (w)) && \
		(/* BN_ucmp(r, (m)) < 0 ? 1 :*/  \
			(BN_mod(t, r, m, ctx) && (swap_tmp = r, r = t, t = swap_tmp, 1))))
		/* BN_MOD_MUL_WORD is only used with 'w' large,
		 * so the BN_ucmp test is probably more overhead
		 * than always using BN_mod (which uses BN_copy if
		 * a similar test returns true). */
		/* We can use BN_mod and do not need BN_nnmod because our
		 * accumulator is never negative (the result of BN_mod does
		 * not depend on the sign of the modulus).
		 */
#define BN_TO_MONTGOMERY_WORD(r, w, mont) \
		(BN_set_word(r, (w)) && BN_to_montgomery(r, r, (mont), ctx))

	if (BN_get_flags(p, BN_FLG_CONSTTIME) != 0)
		{
		/* BN_FLG_CONSTTIME only supported by BN_mod_exp_mont() */
		BNerr(BN_F_BN_MOD_EXP_MONT_WORD,ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED);
		return -1;
		}

	bn_check_top(p);
	bn_check_top(m);

	if (!BN_is_odd(m))
		{
		BNerr(BN_F_BN_MOD_EXP_MONT_WORD,BN_R_CALLED_WITH_EVEN_MODULUS);
		return(0);
		}
	if (m->top == 1)
		a %= m->d[0]; /* make sure that 'a' is reduced */

	bits = BN_num_bits(p);
	if (bits == 0)
		{
		/* x**0 mod 1 is still zero. */
		if (BN_is_one(m))
			{
			ret = 1;
			BN_zero(rr);
			}
		else
			ret = BN_one(rr);
		return ret;
		}
	if (a == 0)
		{
		BN_zero(rr);
		ret = 1;
		return ret;
		}

	BN_CTX_start(ctx);
	d = BN_CTX_get(ctx);
	r = BN_CTX_get(ctx);
	t = BN_CTX_get(ctx);
	if (d == NULL || r == NULL || t == NULL) goto err;

	if (in_mont != NULL)
		mont=in_mont;
	else
		{
		if ((mont = BN_MONT_CTX_new()) == NULL) goto err;
		if (!BN_MONT_CTX_set(mont, m, ctx)) goto err;
		}

	r_is_one = 1; /* except for Montgomery factor */

	/* bits-1 >= 0 */

	/* The result is accumulated in the product r*w. */
	w = a; /* bit 'bits-1' of 'p' is always set */
	for (b = bits-2; b >= 0; b--)
		{
		/* First, square r*w. */
		next_w = w*w;
		if ((next_w/w) != w) /* overflow */
			{
			if (r_is_one)
				{
				if (!BN_TO_MONTGOMERY_WORD(r, w, mont)) goto err;
				r_is_one = 0;
				}
			else
				{
				if (!BN_MOD_MUL_WORD(r, w, m)) goto err;
				}
			next_w = 1;
			}
		w = next_w;
		if (!r_is_one)
			{
			if (!BN_mod_mul_montgomery(r, r, r, mont, ctx)) goto err;
			}

		/* Second, multiply r*w by 'a' if exponent bit is set. */
		if (BN_is_bit_set(p, b))
			{
			next_w = w*a;
			if ((next_w/a) != w) /* overflow */
				{
				if (r_is_one)
					{
					if (!BN_TO_MONTGOMERY_WORD(r, w, mont)) goto err;
					r_is_one = 0;
					}
				else
					{
					if (!BN_MOD_MUL_WORD(r, w, m)) goto err;
					}
				next_w = a;
				}
			w = next_w;
			}
		}

	/* Finally, set r:=r*w. */
	if (w != 1)
		{
		if (r_is_one)
			{
			if (!BN_TO_MONTGOMERY_WORD(r, w, mont)) goto err;
			r_is_one = 0;
			}
		else
			{
			if (!BN_MOD_MUL_WORD(r, w, m)) goto err;
			}
		}

	if (r_is_one) /* can happen only if a == 1*/
		{
		if (!BN_one(rr)) goto err;
		}
	else
		{
		if (!BN_from_montgomery(rr, r, mont, ctx)) goto err;
		}
	ret = 1;
err:
	if ((in_mont == NULL) && (mont != NULL)) BN_MONT_CTX_free(mont);
	BN_CTX_end(ctx);
	bn_check_top(rr);
	return(ret);
	}


/* The old fallback, simple version :-) */
int BN_mod_exp_simple(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
		const BIGNUM *m, BN_CTX *ctx)
	{
	int i,j,bits,ret=0,wstart,wend,window,wvalue;
	int start=1;
	BIGNUM *d;
	/* Table of variables obtained from 'ctx' */
	BIGNUM *val[TABLE_SIZE];

	if (BN_get_flags(p, BN_FLG_CONSTTIME) != 0)
		{
		/* BN_FLG_CONSTTIME only supported by BN_mod_exp_mont() */
		BNerr(BN_F_BN_MOD_EXP_SIMPLE,ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED);
		return -1;
		}

	bits=BN_num_bits(p);

	if (bits == 0)
		{
		ret = BN_one(r);
		return ret;
		}

	BN_CTX_start(ctx);
	d = BN_CTX_get(ctx);
	val[0] = BN_CTX_get(ctx);
	if(!d || !val[0]) goto err;

	if (!BN_nnmod(val[0],a,m,ctx)) goto err;		/* 1 */
	if (BN_is_zero(val[0]))
		{
		BN_zero(r);
		ret = 1;
		goto err;
		}

	window = BN_window_bits_for_exponent_size(bits);
	if (window > 1)
		{
		if (!BN_mod_mul(d,val[0],val[0],m,ctx))
			goto err;				/* 2 */
		j=1<<(window-1);
		for (i=1; i<j; i++)
			{
			if(((val[i] = BN_CTX_get(ctx)) == NULL) ||
					!BN_mod_mul(val[i],val[i-1],d,m,ctx))
				goto err;
			}
		}

	start=1;	/* This is used to avoid multiplication etc
			 * when there is only the value '1' in the
			 * buffer. */
	wvalue=0;	/* The 'value' of the window */
	wstart=bits-1;	/* The top bit of the window */
	wend=0;		/* The bottom bit of the window */

	if (!BN_one(r)) goto err;

	for (;;)
		{
		if (BN_is_bit_set(p,wstart) == 0)
			{
			if (!start)
				if (!BN_mod_mul(r,r,r,m,ctx))
				goto err;
			if (wstart == 0) break;
			wstart--;
			continue;
			}
		/* We now have wstart on a 'set' bit, we now need to work out
		 * how bit a window to do.  To do this we need to scan
		 * forward until the last set bit before the end of the
		 * window */
		j=wstart;
		wvalue=1;
		wend=0;
		for (i=1; i<window; i++)
			{
			if (wstart-i < 0) break;
			if (BN_is_bit_set(p,wstart-i))
				{
				wvalue<<=(i-wend);
				wvalue|=1;
				wend=i;
				}
			}

		/* wend is the size of the current window */
		j=wend+1;
		/* add the 'bytes above' */
		if (!start)
			for (i=0; i<j; i++)
				{
				if (!BN_mod_mul(r,r,r,m,ctx))
					goto err;
				}
		
		/* wvalue will be an odd number < 2^window */
		if (!BN_mod_mul(r,r,val[wvalue>>1],m,ctx))
			goto err;

		/* move the 'window' down further */
		wstart-=wend+1;
		wvalue=0;
		start=0;
		if (wstart < 0) break;
		}
	ret=1;
err:
	BN_CTX_end(ctx);
	bn_check_top(r);
	return(ret);
	}
