/***************************************************************************
 *                                  _   _ ____  _
 *  Project                     ___| | | |  _ \| |
 *                             / __| | | | |_) | |
 *                            | (__| |_| |  _ <| |___
 *                             \___|\___/|_| \_\_____|
 *
 * Copyright (C) 1998 - 2013, Daniel Stenberg, <daniel@haxx.se>, et al.
 *
 * This software is licensed as described in the file COPYING, which
 * you should have received as part of this distribution. The terms
 * are also available at http://curl.haxx.se/docs/copyright.html.
 *
 * You may opt to use, copy, modify, merge, publish, distribute and/or sell
 * copies of the Software, and permit persons to whom the Software is
 * furnished to do so, under the terms of the COPYING file.
 *
 * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
 * KIND, either express or implied.
 *
 * RFC3501 IMAPv4 protocol
 * RFC5092 IMAP URL Scheme
 *
 ***************************************************************************/

#include "setup.h"

#ifndef CURL_DISABLE_IMAP

#ifdef HAVE_NETINET_IN_H
#include <netinet/in.h>
#endif
#ifdef HAVE_ARPA_INET_H
#include <arpa/inet.h>
#endif
#ifdef HAVE_UTSNAME_H
#include <sys/utsname.h>
#endif
#ifdef HAVE_NETDB_H
#include <netdb.h>
#endif
#ifdef __VMS
#include <in.h>
#include <inet.h>
#endif

#if (defined(NETWARE) && defined(__NOVELL_LIBC__))
#undef in_addr_t
#define in_addr_t unsigned long
#endif

#include <curl/curl.h>
#include "urldata.h"
#include "sendf.h"
#include "if2ip.h"
#include "hostip.h"
#include "progress.h"
#include "transfer.h"
#include "escape.h"
#include "http.h" /* for HTTP proxy tunnel stuff */
#include "socks.h"
#include "imap.h"

#include "strtoofft.h"
#include "strequal.h"
#include "sslgen.h"
#include "connect.h"
#include "strerror.h"
#include "select.h"
#include "multiif.h"
#include "url.h"
#include "rawstr.h"
#include "curl_sasl.h"

#define _MPRINTF_REPLACE /* use our functions only */
#include <curl/mprintf.h>

#include "curl_memory.h"
/* The last #include file should be: */
#include "memdebug.h"

/* Local API functions */
static CURLcode imap_parse_url_path(struct connectdata *conn);
static CURLcode imap_regular_transfer(struct connectdata *conn, bool *done);
static CURLcode imap_do(struct connectdata *conn, bool *done);
static CURLcode imap_done(struct connectdata *conn, CURLcode status,
                          bool premature);
static CURLcode imap_connect(struct connectdata *conn, bool *done);
static CURLcode imap_disconnect(struct connectdata *conn, bool dead);
static CURLcode imap_multi_statemach(struct connectdata *conn, bool *done);
static int imap_getsock(struct connectdata *conn,
                        curl_socket_t *socks,
                        int numsocks);
static CURLcode imap_doing(struct connectdata *conn, bool *dophase_done);
static CURLcode imap_setup_connection(struct connectdata *conn);
static CURLcode imap_state_upgrade_tls(struct connectdata *conn);

/*
 * IMAP protocol handler.
 */

const struct Curl_handler Curl_handler_imap = {
  "IMAP",                           /* scheme */
  imap_setup_connection,            /* setup_connection */
  imap_do,                          /* do_it */
  imap_done,                        /* done */
  ZERO_NULL,                        /* do_more */
  imap_connect,                     /* connect_it */
  imap_multi_statemach,             /* connecting */
  imap_doing,                       /* doing */
  imap_getsock,                     /* proto_getsock */
  imap_getsock,                     /* doing_getsock */
  ZERO_NULL,                        /* domore_getsock */
  ZERO_NULL,                        /* perform_getsock */
  imap_disconnect,                  /* disconnect */
  ZERO_NULL,                        /* readwrite */
  PORT_IMAP,                        /* defport */
  CURLPROTO_IMAP,                   /* protocol */
  PROTOPT_CLOSEACTION | PROTOPT_NEEDSPWD
  | PROTOPT_NOURLQUERY              /* flags */
};


#ifdef USE_SSL
/*
 * IMAPS protocol handler.
 */

const struct Curl_handler Curl_handler_imaps = {
  "IMAPS",                          /* scheme */
  imap_setup_connection,            /* setup_connection */
  imap_do,                          /* do_it */
  imap_done,                        /* done */
  ZERO_NULL,                        /* do_more */
  imap_connect,                     /* connect_it */
  imap_multi_statemach,             /* connecting */
  imap_doing,                       /* doing */
  imap_getsock,                     /* proto_getsock */
  imap_getsock,                     /* doing_getsock */
  ZERO_NULL,                        /* domore_getsock */
  ZERO_NULL,                        /* perform_getsock */
  imap_disconnect,                  /* disconnect */
  ZERO_NULL,                        /* readwrite */
  PORT_IMAPS,                       /* defport */
  CURLPROTO_IMAP | CURLPROTO_IMAPS, /* protocol */
  PROTOPT_CLOSEACTION | PROTOPT_SSL | PROTOPT_NEEDSPWD
  | PROTOPT_NOURLQUERY              /* flags */
};
#endif

#ifndef CURL_DISABLE_HTTP
/*
 * HTTP-proxyed IMAP protocol handler.
 */

static const struct Curl_handler Curl_handler_imap_proxy = {
  "IMAP",                               /* scheme */
  ZERO_NULL,                            /* setup_connection */
  Curl_http,                            /* do_it */
  Curl_http_done,                       /* done */
  ZERO_NULL,                            /* do_more */
  ZERO_NULL,                            /* connect_it */
  ZERO_NULL,                            /* connecting */
  ZERO_NULL,                            /* doing */
  ZERO_NULL,                            /* proto_getsock */
  ZERO_NULL,                            /* doing_getsock */
  ZERO_NULL,                            /* domore_getsock */
  ZERO_NULL,                            /* perform_getsock */
  ZERO_NULL,                            /* disconnect */
  ZERO_NULL,                            /* readwrite */
  PORT_IMAP,                            /* defport */
  CURLPROTO_HTTP,                       /* protocol */
  PROTOPT_NONE                          /* flags */
};


#ifdef USE_SSL
/*
 * HTTP-proxyed IMAPS protocol handler.
 */

static const struct Curl_handler Curl_handler_imaps_proxy = {
  "IMAPS",                              /* scheme */
  ZERO_NULL,                            /* setup_connection */
  Curl_http,                            /* do_it */
  Curl_http_done,                       /* done */
  ZERO_NULL,                            /* do_more */
  ZERO_NULL,                            /* connect_it */
  ZERO_NULL,                            /* connecting */
  ZERO_NULL,                            /* doing */
  ZERO_NULL,                            /* proto_getsock */
  ZERO_NULL,                            /* doing_getsock */
  ZERO_NULL,                            /* domore_getsock */
  ZERO_NULL,                            /* perform_getsock */
  ZERO_NULL,                            /* disconnect */
  ZERO_NULL,                            /* readwrite */
  PORT_IMAPS,                           /* defport */
  CURLPROTO_HTTP,                       /* protocol */
  PROTOPT_NONE                          /* flags */
};
#endif
#endif

/***********************************************************************
 *
 * imap_sendf()
 *
 * Sends the formated string as an IMAP command to the server.
 *
 * Designed to never block.
 */
static CURLcode imap_sendf(struct connectdata *conn,
                           const char *idstr, /* command id to wait for */
                           const char *fmt, ...)
{
  CURLcode res;
  struct imap_conn *imapc = &conn->proto.imapc;
  va_list ap;
  va_start(ap, fmt);

  imapc->idstr = idstr;

  res = Curl_pp_vsendf(&imapc->pp, fmt, ap);

  va_end(ap);

  return res;
}

static const char *getcmdid(struct connectdata *conn)
{
  static const char * const ids[]= {
    "A",
    "B",
    "C",
    "D"
  };

  struct imap_conn *imapc = &conn->proto.imapc;

  /* Get the next id, but wrap at end of table */
  imapc->cmdid = (int)((imapc->cmdid + 1) % (sizeof(ids) / sizeof(ids[0])));

  return ids[imapc->cmdid];
}

/***********************************************************************
 *
 * imap_atom()
 *
 * Checks the input string for characters that need escaping and returns an
 * atom ready for sending to the server.
 *
 * The returned string needs to be freed.
 *
 */
static char* imap_atom(const char* str)
{
  const char *p1;
  char *p2;
  size_t backsp_count = 0;
  size_t quote_count = 0;
  bool space_exists = FALSE;
  size_t newlen = 0;
  char *newstr = NULL;

  if(!str)
    return NULL;

  /* Count any unescapped characters */
  p1 = str;
  while(*p1) {
    if(*p1 == '\\')
      backsp_count++;
    else if(*p1 == '"')
      quote_count++;
    else if(*p1 == ' ')
      space_exists = TRUE;

    p1++;
  }

  /* Does the input contain any unescapped characters? */
  if(!backsp_count && !quote_count && !space_exists)
    return strdup(str);

  /* Calculate the new string length */
  newlen = strlen(str) + backsp_count + quote_count + (space_exists ? 2 : 0);

  /* Allocate the new string */
  newstr = (char *) malloc((newlen + 1) * sizeof(char));
  if(!newstr)
    return NULL;

  /* Surround the string in quotes if necessary */
  p2 = newstr;
  if(space_exists) {
    newstr[0] = '"';
    newstr[newlen - 1] = '"';
    p2++;
  }

  /* Copy the string, escaping backslash and quote characters along the way */
  p1 = str;
  while(*p1) {
    if(*p1 == '\\' || *p1 == '"') {
      *p2 = '\\';
      p2++;
    }

   *p2 = *p1;

    p1++;
    p2++;
  }

  /* Terminate the string */
  newstr[newlen] = '\0';

  return newstr;
}

/* Function that checks for an ending imap status code at the start of the
   given string but also detects the supported mechanisms from the CAPABILITY
   response. */
static int imap_endofresp(struct pingpong *pp, int *resp)
{
  char *line = pp->linestart_resp;
  size_t len = pp->nread_resp;
  struct imap_conn *imapc = &pp->conn->proto.imapc;
  const char *id = imapc->idstr;
  size_t id_len = strlen(id);
  size_t wordlen;

  /* Do we have a generic command response? */
  if(len >= id_len + 3) {
    if(!memcmp(id, line, id_len) && line[id_len] == ' ') {
      *resp = line[id_len + 1]; /* O, N or B */
      return TRUE;
    }
  }

  /* Are we processing CAPABILITY command responses? */
  if(imapc->state == IMAP_CAPABILITY) {
    /* Do we have a valid response? */
    if(len >= 2 && !memcmp("* ", line, 2)) {
      line += 2;
      len -= 2;

      /* Loop through the data line */
      for(;;) {
        while(len &&
              (*line == ' ' || *line == '\t' ||
               *line == '\r' || *line == '\n')) {

          if(*line == '\n')
            return FALSE;

          line++;
          len--;
        }

        if(!len)
          break;

        /* Extract the word */
        for(wordlen = 0; wordlen < len && line[wordlen] != ' ' &&
              line[wordlen] != '\t' && line[wordlen] != '\r' &&
              line[wordlen] != '\n';)
          wordlen++;

        /* Do we have an AUTH capability? */
        if(wordlen > 5 && !memcmp(line, "AUTH=", 5)) {
          line += 5;
          len -= 5;
          wordlen -= 5;

          /* Test the word for a matching authentication mechanism */
          if(wordlen == 5 && !memcmp(line, "LOGIN", 5))
            imapc->authmechs |= SASL_MECH_LOGIN;
          if(wordlen == 5 && !memcmp(line, "PLAIN", 5))
            imapc->authmechs |= SASL_MECH_PLAIN;
          else if(wordlen == 8 && !memcmp(line, "CRAM-MD5", 8))
            imapc->authmechs |= SASL_MECH_CRAM_MD5;
          else if(wordlen == 10 && !memcmp(line, "DIGEST-MD5", 10))
            imapc->authmechs |= SASL_MECH_DIGEST_MD5;
          else if(wordlen == 6 && !memcmp(line, "GSSAPI", 6))
            imapc->authmechs |= SASL_MECH_GSSAPI;
          else if(wordlen == 8 && !memcmp(line, "EXTERNAL", 8))
            imapc->authmechs |= SASL_MECH_EXTERNAL;
          else if(wordlen == 4 && !memcmp(line, "NTLM", 4))
            imapc->authmechs |= SASL_MECH_NTLM;
        }

        line += wordlen;
        len -= wordlen;
      }
    }
  }

  /* Are we processing FETCH command responses? */
  if(imapc->state == IMAP_FETCH) {
    /* Do we have a valid response? */
    if(len >= 2 && !memcmp("* ", line, 2)) {
      *resp = '*';
      return TRUE;
    }
  }

  return FALSE; /* Nothing for us */
}

/* This is the ONLY way to change IMAP state! */
static void state(struct connectdata *conn,
                  imapstate newstate)
{
  struct imap_conn *imapc = &conn->proto.imapc;
#if defined(DEBUGBUILD) && !defined(CURL_DISABLE_VERBOSE_STRINGS)
  /* for debug purposes */
  static const char * const names[]={
    "STOP",
    "SERVERGREET",
    "STARTTLS",
    "UPGRADETLS",
    "CAPABILITY",
    "LOGIN",
    "SELECT",
    "FETCH",
    "LOGOUT",
    /* LAST */
  };

  if(imapc->state != newstate)
    infof(conn->data, "IMAP %p state change from %s to %s\n",
          imapc, names[imapc->state], names[newstate]);
#endif

  imapc->state = newstate;
}

static CURLcode imap_state_capability(struct connectdata *conn)
{
  CURLcode result = CURLE_OK;
  struct imap_conn *imapc = &conn->proto.imapc;
  const char *str;

  imapc->authmechs = 0;         /* No known authentication mechanisms yet */

  /* Check we have a username and password to authenticate with and end the
     connect phase if we don't */
  if(!conn->bits.user_passwd) {
    state(conn, IMAP_STOP);

    return result;
  }

  str = getcmdid(conn);

  /* Send the CAPABILITY command */
  result = imap_sendf(conn, str, "%s CAPABILITY", str);

  if(result)
    return result;

  state(conn, IMAP_CAPABILITY);

  return CURLE_OK;
}

static CURLcode imap_state_login(struct connectdata *conn)
{
  CURLcode result;
  struct FTP *imap = conn->data->state.proto.imap;
  const char *str = getcmdid(conn);
  char *user = imap_atom(imap->user);
  char *passwd = imap_atom(imap->passwd);

  /* send USER and password */
  result = imap_sendf(conn, str, "%s LOGIN %s %s", str,
                      user ? user : "", passwd ? passwd : "");

  Curl_safefree(user);
  Curl_safefree(passwd);

  if(result)
    return result;

  state(conn, IMAP_LOGIN);

  return CURLE_OK;
}

/* For the IMAP "protocol connect" and "doing" phases only */
static int imap_getsock(struct connectdata *conn,
                        curl_socket_t *socks,
                        int numsocks)
{
  return Curl_pp_getsock(&conn->proto.imapc.pp, socks, numsocks);
}

#ifdef USE_SSL
static void imap_to_imaps(struct connectdata *conn)
{
  conn->handler = &Curl_handler_imaps;
}
#else
#define imap_to_imaps(x) Curl_nop_stmt
#endif

/* For the initial server greeting */
static CURLcode imap_state_servergreet_resp(struct connectdata *conn,
                                            int imapcode,
                                            imapstate instate)
{
  CURLcode result = CURLE_OK;
  struct SessionHandle *data = conn->data;

  (void)instate; /* no use for this yet */

  if(imapcode != 'O') {
    failf(data, "Got unexpected imap-server response");
    return CURLE_FTP_WEIRD_SERVER_REPLY;
  }

  if(data->set.use_ssl && !conn->ssl[FIRSTSOCKET].use) {
    /* We don't have a SSL/TLS connection yet, but SSL is requested. Switch
       to TLS connection now */
    const char *str = getcmdid(conn);
    result = imap_sendf(conn, str, "%s STARTTLS", str);
    state(conn, IMAP_STARTTLS);
  }
  else
    result = imap_state_capability(conn);

  return result;
}

/* For STARTTLS responses */
static CURLcode imap_state_starttls_resp(struct connectdata *conn,
                                         int imapcode,
                                         imapstate instate)
{
  CURLcode result = CURLE_OK;
  struct SessionHandle *data = conn->data;

  (void)instate; /* no use for this yet */

  if(imapcode != 'O') {
    if(data->set.use_ssl != CURLUSESSL_TRY) {
      failf(data, "STARTTLS denied. %c", imapcode);
      result = CURLE_USE_SSL_FAILED;
    }
    else
      result = imap_state_capability(conn);
  }
  else {
    if(data->state.used_interface == Curl_if_multi) {
      state(conn, IMAP_UPGRADETLS);
      result = imap_state_upgrade_tls(conn);
    }
    else {
      result = Curl_ssl_connect(conn, FIRSTSOCKET);
      if(CURLE_OK == result) {
        imap_to_imaps(conn);
        result = imap_state_capability(conn);
      }
    }
  }

  return result;
}

static CURLcode imap_state_upgrade_tls(struct connectdata *conn)
{
  struct imap_conn *imapc = &conn->proto.imapc;
  CURLcode result;

  result = Curl_ssl_connect_nonblocking(conn, FIRSTSOCKET, &imapc->ssldone);

  if(imapc->ssldone) {
    imap_to_imaps(conn);
    result = imap_state_capability(conn);
  }

  return result;
}

/* For CAPABILITY responses */
static CURLcode imap_state_capability_resp(struct connectdata *conn,
                                           int imapcode,
                                           imapstate instate)
{
  (void)imapcode; /* no use for this yet */
  (void)instate; /* no use for this yet */

  return imap_state_login(conn);
}

/* For LOGIN responses */
static CURLcode imap_state_login_resp(struct connectdata *conn,
                                      int imapcode,
                                      imapstate instate)
{
  CURLcode result = CURLE_OK;
  struct SessionHandle *data = conn->data;

  (void)instate; /* no use for this yet */

  if(imapcode != 'O') {
    failf(data, "Access denied. %c", imapcode);
    result = CURLE_LOGIN_DENIED;
  }
  else
    /* End of connect phase */
    state(conn, IMAP_STOP);

  return result;
}

/* Start the DO phase */
static CURLcode imap_select(struct connectdata *conn)
{
  CURLcode result = CURLE_OK;
  struct imap_conn *imapc = &conn->proto.imapc;
  const char *str = getcmdid(conn);

  result = imap_sendf(conn, str, "%s SELECT %s", str,
                      imapc->mailbox?imapc->mailbox:"");
  if(result)
    return result;

  state(conn, IMAP_SELECT);

  return result;
}

static CURLcode imap_fetch(struct connectdata *conn)
{
  CURLcode result = CURLE_OK;
  const char *str = getcmdid(conn);

  /* TODO: make this select the correct mail
   * Use "1 body[text]" to get the full mail body of mail 1
   */
  result = imap_sendf(conn, str, "%s FETCH 1 BODY[TEXT]", str);
  if(result)
    return result;

  /*
   * When issued, the server will respond with a single line similar to
   * '* 1 FETCH (BODY[TEXT] {2021}'
   *
   * Identifying the fetch and how many bytes of contents we can expect. We
   * must extract that number before continuing to "download as usual".
   */

  state(conn, IMAP_FETCH);

  return result;
}

/* For SELECT responses */
static CURLcode imap_state_select_resp(struct connectdata *conn,
                                       int imapcode,
                                       imapstate instate)
{
  CURLcode result = CURLE_OK;
  struct SessionHandle *data = conn->data;

  (void)instate; /* no use for this yet */

  if(imapcode != 'O') {
    failf(data, "Select failed");
    result = CURLE_LOGIN_DENIED;
  }
  else
    result = imap_fetch(conn);

  return result;
}

/* For the (first line of) FETCH BODY[TEXT] response */
static CURLcode imap_state_fetch_resp(struct connectdata *conn,
                                      int imapcode,
                                      imapstate instate)
{
  CURLcode result = CURLE_OK;
  struct SessionHandle *data = conn->data;
  struct imap_conn *imapc = &conn->proto.imapc;
  struct FTP *imap = data->state.proto.imap;
  struct pingpong *pp = &imapc->pp;
  const char *ptr = data->state.buffer;

  (void)instate; /* no use for this yet */

  if('*' != imapcode) {
    Curl_pgrsSetDownloadSize(data, 0);
    state(conn, IMAP_STOP);
    return CURLE_OK;
  }

  /* Something like this comes "* 1 FETCH (BODY[TEXT] {2021}\r" */
  while(*ptr && (*ptr != '{'))
    ptr++;

  if(*ptr == '{') {
    curl_off_t filesize = curlx_strtoofft(ptr + 1, NULL, 10);
    if(filesize)
      Curl_pgrsSetDownloadSize(data, filesize);

    infof(data, "Found %" FORMAT_OFF_TU " bytes to download\n", filesize);

    if(pp->cache) {
      /* At this point there is a bunch of data in the header "cache" that is
         actually body content, send it as body and then skip it. Do note
         that there may even be additional "headers" after the body. */
      size_t chunk = pp->cache_size;

      if(chunk > (size_t)filesize)
        /* the conversion from curl_off_t to size_t is always fine here */
        chunk = (size_t)filesize;

      result = Curl_client_write(conn, CLIENTWRITE_BODY, pp->cache, chunk);
      if(result)
        return result;

      filesize -= chunk;

      /* we've now used parts of or the entire cache */
      if(pp->cache_size > chunk) {
        /* part of, move the trailing data to the start and reduce the size */
        memmove(pp->cache, pp->cache+chunk,
                pp->cache_size - chunk);
        pp->cache_size -= chunk;
      }
      else {
        /* cache is drained */
        Curl_safefree(pp->cache);
        pp->cache = NULL;
        pp->cache_size = 0;
      }
    }

    infof(data, "Filesize left: %" FORMAT_OFF_T "\n", filesize);

    if(!filesize)
      /* the entire data is already transferred! */
      Curl_setup_transfer(conn, -1, -1, FALSE, NULL, -1, NULL);
    else
      /* IMAP download */
      Curl_setup_transfer(conn, FIRSTSOCKET, filesize, FALSE,
                          imap->bytecountp, -1, NULL); /* no upload here */

    data->req.maxdownload = filesize;
  }
  else
    /* We don't know how to parse this line */
    result = CURLE_FTP_WEIRD_SERVER_REPLY; /* TODO: fix this code */

  /* End of do phase */
  state(conn, IMAP_STOP);

  return result;
}

static CURLcode imap_statemach_act(struct connectdata *conn)
{
  CURLcode result;
  curl_socket_t sock = conn->sock[FIRSTSOCKET];
  int imapcode;
  struct imap_conn *imapc = &conn->proto.imapc;
  struct pingpong *pp = &imapc->pp;
  size_t nread = 0;

  /* Busy upgrading the connection; right now all I/O is SSL/TLS, not IMAP */
  if(imapc->state == IMAP_UPGRADETLS)
    return imap_state_upgrade_tls(conn);

  /* Flush any data that needs to be sent */
  if(pp->sendleft)
    return Curl_pp_flushsend(pp);

  /* Read the response from the server */
  result = Curl_pp_readresp(sock, pp, &imapcode, &nread);
  if(result)
    return result;

  if(imapcode) {
    /* We have now received a full IMAP server response */
    switch(imapc->state) {
    case IMAP_SERVERGREET:
      result = imap_state_servergreet_resp(conn, imapcode, imapc->state);
      break;

    case IMAP_STARTTLS:
      result = imap_state_starttls_resp(conn, imapcode, imapc->state);
      break;

    case IMAP_CAPABILITY:
      result = imap_state_capability_resp(conn, imapcode, imapc->state);
      break;

    case IMAP_LOGIN:
      result = imap_state_login_resp(conn, imapcode, imapc->state);
      break;

    case IMAP_FETCH:
      result = imap_state_fetch_resp(conn, imapcode, imapc->state);
      break;

    case IMAP_SELECT:
      result = imap_state_select_resp(conn, imapcode, imapc->state);
      break;

    case IMAP_LOGOUT:
      /* fallthrough, just stop! */
    default:
      /* internal error */
      state(conn, IMAP_STOP);
      break;
    }
  }

  return result;
}

/* Called repeatedly until done from multi.c */
static CURLcode imap_multi_statemach(struct connectdata *conn,
                                         bool *done)
{
  struct imap_conn *imapc = &conn->proto.imapc;
  CURLcode result;

  if((conn->handler->flags & PROTOPT_SSL) && !imapc->ssldone)
    result = Curl_ssl_connect_nonblocking(conn, FIRSTSOCKET, &imapc->ssldone);
  else
    result = Curl_pp_multi_statemach(&imapc->pp);

  *done = (imapc->state == IMAP_STOP) ? TRUE : FALSE;

  return result;
}

static CURLcode imap_easy_statemach(struct connectdata *conn)
{
  struct imap_conn *imapc = &conn->proto.imapc;
  struct pingpong *pp = &imapc->pp;
  CURLcode result = CURLE_OK;

  while(imapc->state != IMAP_STOP) {
    result = Curl_pp_easy_statemach(pp);
    if(result)
      break;
  }

  return result;
}

/* Allocate and initialize the struct IMAP for the current SessionHandle if
   required */
static CURLcode imap_init(struct connectdata *conn)
{
  struct SessionHandle *data = conn->data;
  struct FTP *imap = data->state.proto.imap;

  if(!imap) {
    imap = data->state.proto.imap = calloc(sizeof(struct FTP), 1);
    if(!imap)
      return CURLE_OUT_OF_MEMORY;
  }

  /* Get some initial data into the imap struct */
  imap->bytecountp = &data->req.bytecount;

  /* No need to duplicate user+password, the connectdata struct won't change
     during a session, but we re-init them here since on subsequent inits
     since the conn struct may have changed or been replaced.
  */
  imap->user = conn->user;
  imap->passwd = conn->passwd;

  return CURLE_OK;
}

/***********************************************************************
 *
 * imap_connect() should do everything that is to be considered a part of
 * the connection phase.
 *
 * The variable 'done' points to will be TRUE if the protocol-layer connect
 * phase is done when this function returns, or FALSE is not. When called as
 * a part of the easy interface, it will always be TRUE.
 */
static CURLcode imap_connect(struct connectdata *conn,
                                 bool *done) /* see description above */
{
  CURLcode result;
  struct imap_conn *imapc = &conn->proto.imapc;
  struct SessionHandle *data=conn->data;
  struct pingpong *pp = &imapc->pp;

  *done = FALSE; /* default to not done yet */

  /* If there already is a protocol-specific struct allocated for this
     sessionhandle, deal with it */
  Curl_reset_reqproto(conn);

  result = imap_init(conn);
  if(CURLE_OK != result)
    return result;

  /* We always support persistent connections on imap */
  conn->bits.close = FALSE;

  pp->response_time = RESP_TIMEOUT; /* set default response time-out */
  pp->statemach_act = imap_statemach_act;
  pp->endofresp = imap_endofresp;
  pp->conn = conn;

  if((conn->handler->flags & PROTOPT_SSL) &&
     data->state.used_interface != Curl_if_multi) {
    /* IMAPS is simply imap with SSL for the control channel */
    /* so perform the SSL initialization for this socket */
    result = Curl_ssl_connect(conn, FIRSTSOCKET);
    if(result)
      return result;
  }

  /* Initialise the response reader stuff */
  Curl_pp_init(pp);

  /* Start off waiting for the server greeting response */
  state(conn, IMAP_SERVERGREET);

  /* Start off with an id of '*' */
  imapc->idstr = "*";

  if(data->state.used_interface == Curl_if_multi)
    result = imap_multi_statemach(conn, done);
  else {
    result = imap_easy_statemach(conn);
    if(!result)
      *done = TRUE;
  }

  return result;
}

/***********************************************************************
 *
 * imap_done()
 *
 * The DONE function. This does what needs to be done after a single DO has
 * performed.
 *
 * Input argument is already checked for validity.
 */
static CURLcode imap_done(struct connectdata *conn, CURLcode status,
                          bool premature)
{
  struct SessionHandle *data = conn->data;
  struct FTP *imap = data->state.proto.imap;
  CURLcode result=CURLE_OK;

  (void)premature;

  if(!imap)
    /* When the easy handle is removed from the multi while libcurl is still
     * trying to resolve the host name, it seems that the imap struct is not
     * yet initialized, but the removal action calls Curl_done() which calls
     * this function. So we simply return success if no imap pointer is set.
     */
    return CURLE_OK;

  if(status) {
    conn->bits.close = TRUE; /* marked for closure */
    result = status;         /* use the already set error code */
  }

  /* Clear the transfer mode for the next connection */
  imap->transfer = FTPTRANSFER_BODY;

  return result;
}

/***********************************************************************
 *
 * imap_perform()
 *
 * This is the actual DO function for IMAP. Get a file/directory according to
 * the options previously setup.
 */
static CURLcode imap_perform(struct connectdata *conn, bool *connected,
                             bool *dophase_done)
{
  /* This is IMAP and no proxy */
  CURLcode result = CURLE_OK;

  DEBUGF(infof(conn->data, "DO phase starts\n"));

  if(conn->data->set.opt_no_body) {
    /* Requested no body means no transfer */
    struct FTP *imap = conn->data->state.proto.imap;
    imap->transfer = FTPTRANSFER_INFO;
  }

  *dophase_done = FALSE; /* not done yet */

  /* Start the first command in the DO phase */
  result = imap_select(conn);
  if(result)
    return result;

  /* Run the state-machine */
  if(conn->data->state.used_interface == Curl_if_multi)
    result = imap_multi_statemach(conn, dophase_done);
  else {
    result = imap_easy_statemach(conn);
    *dophase_done = TRUE; /* with the easy interface we are done here */
  }
  *connected = conn->bits.tcpconnect[FIRSTSOCKET];

  if(*dophase_done)
    DEBUGF(infof(conn->data, "DO phase is complete\n"));

  return result;
}

/***********************************************************************
 *
 * imap_do()
 *
 * This function is registered as 'curl_do' function. It decodes the path
 * parts etc as a wrapper to the actual DO function (imap_perform).
 *
 * The input argument is already checked for validity.
 */
static CURLcode imap_do(struct connectdata *conn, bool *done)
{
  CURLcode retcode = CURLE_OK;

  *done = FALSE; /* default to false */

  /*
    Since connections can be re-used between SessionHandles, this might be a
    connection already existing but on a fresh SessionHandle struct so we must
    make sure we have a good 'struct IMAP' to play with. For new connections,
    the struct IMAP is allocated and setup in the imap_connect() function.
  */
  Curl_reset_reqproto(conn);
  retcode = imap_init(conn);
  if(retcode)
    return retcode;

  /* Parse the URL path */
  retcode = imap_parse_url_path(conn);
  if(retcode)
    return retcode;

  retcode = imap_regular_transfer(conn, done);

  return retcode;
}

/***********************************************************************
 *
 * imap_logout()
 *
 * This should be called before calling sclose().  We should then wait for the
 * response from the server before returning. The calling code should then try
 * to close the connection.
 *
 */
static CURLcode imap_logout(struct connectdata *conn)
{
  CURLcode result = CURLE_OK;
  const char *str = getcmdid(conn);

  result = imap_sendf(conn, str, "%s LOGOUT", str, NULL);
  if(result)
    return result;

  state(conn, IMAP_LOGOUT);

  result = imap_easy_statemach(conn);

  return result;
}

/***********************************************************************
 *
 * imap_disconnect()
 *
 * Disconnect from an IMAP server. Cleanup protocol-specific per-connection
 * resources. BLOCKING.
 */
static CURLcode imap_disconnect(struct connectdata *conn, bool dead_connection)
{
  struct imap_conn *imapc= &conn->proto.imapc;

  /* We cannot send quit unconditionally. If this connection is stale or
     bad in any way, sending quit and waiting around here will make the
     disconnect wait in vain and cause more problems than we need to */

  /* The IMAP session may or may not have been allocated/setup at this
     point! */
  if(!dead_connection && imapc->pp.conn)
    (void)imap_logout(conn); /* ignore errors on the LOGOUT */

  /* Disconnect from the server */
  Curl_pp_disconnect(&imapc->pp);

  /* Cleanup our connection based variables */
  Curl_safefree(imapc->mailbox);

  return CURLE_OK;
}

/***********************************************************************
 *
 * imap_parse_url_path()
 *
 * Parse the URL path into separate path components.
 *
 */
static CURLcode imap_parse_url_path(struct connectdata *conn)
{
  /* The imap struct is already inited in imap_connect() */
  struct imap_conn *imapc = &conn->proto.imapc;
  struct SessionHandle *data = conn->data;
  const char *path = data->state.path;

  if(!*path)
    path = "INBOX";

  /* URL decode the path and use this mailbox */
  return Curl_urldecode(data, path, 0, &imapc->mailbox, NULL, TRUE);
}

/* Call this when the DO phase has completed */
static CURLcode imap_dophase_done(struct connectdata *conn, bool connected)
{
  struct FTP *imap = conn->data->state.proto.imap;

  (void)connected;

  if(imap->transfer != FTPTRANSFER_BODY)
    /* no data to transfer */
    Curl_setup_transfer(conn, -1, -1, FALSE, NULL, -1, NULL);

  return CURLE_OK;
}

/* Called from multi.c while DOing */
static CURLcode imap_doing(struct connectdata *conn, bool *dophase_done)
{
  CURLcode result = imap_multi_statemach(conn, dophase_done);

  if(result)
    DEBUGF(infof(conn->data, "DO phase failed\n"));
  else {
    if(*dophase_done) {
      result = imap_dophase_done(conn, FALSE /* not connected */);

      DEBUGF(infof(conn->data, "DO phase is complete\n"));
    }
  }

  return result;
}

/***********************************************************************
 *
 * imap_regular_transfer()
 *
 * The input argument is already checked for validity.
 *
 * Performs all commands done before a regular transfer between a local and a
 * remote host.
 */
static CURLcode imap_regular_transfer(struct connectdata *conn,
                                      bool *dophase_done)
{
  CURLcode result = CURLE_OK;
  bool connected = FALSE;
  struct SessionHandle *data = conn->data;

  /* Make sure size is unknown at this point */
  data->req.size = -1;

  Curl_pgrsSetUploadCounter(data, 0);
  Curl_pgrsSetDownloadCounter(data, 0);
  Curl_pgrsSetUploadSize(data, 0);
  Curl_pgrsSetDownloadSize(data, 0);

  result = imap_perform(conn, &connected, dophase_done);

  if(CURLE_OK == result) {
    if(!*dophase_done)
      /* The DO phase has not completed yet */
      return CURLE_OK;

    result = imap_dophase_done(conn, connected);
    if(result)
      return result;
  }

  return result;
}

static CURLcode imap_setup_connection(struct connectdata * conn)
{
  struct SessionHandle *data = conn->data;

  if(conn->bits.httpproxy && !data->set.tunnel_thru_httpproxy) {
    /* Unless we have asked to tunnel imap operations through the proxy, we
       switch and use HTTP operations only */
#ifndef CURL_DISABLE_HTTP
    if(conn->handler == &Curl_handler_imap)
      conn->handler = &Curl_handler_imap_proxy;
    else {
#ifdef USE_SSL
      conn->handler = &Curl_handler_imaps_proxy;
#else
      failf(data, "IMAPS not supported!");
      return CURLE_UNSUPPORTED_PROTOCOL;
#endif
    }

    /* We explicitly mark this connection as persistent here as we're doing
       IMAP over HTTP and thus we accidentally avoid setting this value
       otherwise */
    conn->bits.close = FALSE;
#else
    failf(data, "IMAP over http proxy requires HTTP support built-in!");
    return CURLE_UNSUPPORTED_PROTOCOL;
#endif
  }

  data->state.path++;   /* don't include the initial slash */

  return CURLE_OK;
}

#endif /* CURL_DISABLE_IMAP */
