/***************************************************************************
 *                                  _   _ ____  _
 *  Project                     ___| | | |  _ \| |
 *                             / __| | | | |_) | |
 *                            | (__| |_| |  _ <| |___
 *                             \___|\___/|_| \_\_____|
 *
 * Copyright (C) 1998 - 2007, Daniel Stenberg, <daniel@haxx.se>, et al.
 *
 * This software is licensed as described in the file COPYING, which
 * you should have received as part of this distribution. The terms
 * are also available at http://curl.haxx.se/docs/copyright.html.
 *
 * You may opt to use, copy, modify, merge, publish, distribute and/or sell
 * copies of the Software, and permit persons to whom the Software is
 * furnished to do so, under the terms of the COPYING file.
 *
 * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
 * KIND, either express or implied.
 *
 * $Id$
 ***************************************************************************/

#include "setup.h"

#include <string.h>

#ifdef NEED_MALLOC_H
#include <malloc.h>
#endif
#ifdef HAVE_SYS_TYPES_H
#include <sys/types.h>
#endif
#ifdef HAVE_SYS_SOCKET_H
#include <sys/socket.h>
#endif
#ifdef HAVE_NETINET_IN_H
#include <netinet/in.h>
#endif
#ifdef HAVE_NETDB_H
#include <netdb.h>
#endif
#ifdef HAVE_ARPA_INET_H
#include <arpa/inet.h>
#endif
#ifdef HAVE_STDLIB_H
#include <stdlib.h>     /* required for free() prototypes */
#endif
#ifdef HAVE_UNISTD_H
#include <unistd.h>     /* for the close() proto */
#endif
#ifdef  VMS
#include <in.h>
#include <inet.h>
#include <stdlib.h>
#endif

#ifdef HAVE_SETJMP_H
#include <setjmp.h>
#endif

#ifdef HAVE_PROCESS_H
#include <process.h>
#endif

#include "urldata.h"
#include "sendf.h"
#include "hostip.h"
#include "hash.h"
#include "share.h"
#include "strerror.h"
#include "url.h"
#include "inet_pton.h"
#include "connect.h"

#define _MPRINTF_REPLACE /* use our functions only */
#include <curl/mprintf.h>

#if defined(HAVE_INET_NTOA_R) && !defined(HAVE_INET_NTOA_R_DECL)
#include "inet_ntoa_r.h"
#endif

#include "memory.h"
/* The last #include file should be: */
#include "memdebug.h"

/***********************************************************************
 * Only for ipv6-enabled builds
 **********************************************************************/
#ifdef CURLRES_IPV6
#ifndef CURLRES_ARES
/*
 * This is a wrapper function for freeing name information in a protocol
 * independent way. This takes care of using the appropriate underlaying
 * function.
 */
void Curl_freeaddrinfo(Curl_addrinfo *p)
{
  freeaddrinfo(p);
}

#ifdef CURLRES_ASYNCH
/*
 * Curl_addrinfo_copy() is used by the asynch callback to copy a given
 * address. But this is an ipv6 build and then we don't copy the address, we
 * just return the same pointer!
 */
Curl_addrinfo *Curl_addrinfo_copy(const void *orig, int port)
{
  (void) port;
  return (Curl_addrinfo*)orig;
}
#endif  /* CURLRES_ASYNCH */
#endif  /* CURLRES_ARES */

#ifdef CURLDEBUG
/* These are strictly for memory tracing and are using the same style as the
 * family otherwise present in memdebug.c. I put these ones here since they
 * require a bunch of structs I didn't wanna include in memdebug.c
 */
int curl_dogetaddrinfo(const char *hostname, const char *service,
                       struct addrinfo *hints,
                       struct addrinfo **result,
                       int line, const char *source)
{
  int res=(getaddrinfo)(hostname, service, hints, result);
  if(0 == res) {
    /* success */
    if(logfile)
      fprintf(logfile, "ADDR %s:%d getaddrinfo() = %p\n",
              source, line, (void *)*result);
  }
  else {
    if(logfile)
      fprintf(logfile, "ADDR %s:%d getaddrinfo() failed\n",
              source, line);
  }
  return res;
}

/*
 * For CURLRES_ARS, this should be written using ares_gethostbyaddr()
 * (ignoring the fact c-ares doesn't return 'serv').
 */
#ifdef HAVE_GETNAMEINFO
int curl_dogetnameinfo(GETNAMEINFO_QUAL_ARG1 GETNAMEINFO_TYPE_ARG1 sa,
                       GETNAMEINFO_TYPE_ARG2 salen,
                       char *host, GETNAMEINFO_TYPE_ARG46 hostlen,
                       char *serv, GETNAMEINFO_TYPE_ARG46 servlen,
                       GETNAMEINFO_TYPE_ARG7 flags,
                       int line, const char *source)
{
  int res = (getnameinfo)(sa, salen,
                          host, hostlen,
                          serv, servlen,
                          flags);
  if(0 == res) {
    /* success */
    if(logfile)
      fprintf(logfile, "GETNAME %s:%d getnameinfo()\n",
              source, line);
  }
  else {
    if(logfile)
      fprintf(logfile, "GETNAME %s:%d getnameinfo() failed = %d\n",
              source, line, res);
  }
  return res;
}
#endif

void curl_dofreeaddrinfo(struct addrinfo *freethis,
                         int line, const char *source)
{
  (freeaddrinfo)(freethis);
  if(logfile)
    fprintf(logfile, "ADDR %s:%d freeaddrinfo(%p)\n",
            source, line, (void *)freethis);
}
#endif  /* CURLDEBUG */

/*
 * Curl_ipvalid() checks what CURL_IPRESOLVE_* requirements that might've
 * been set and returns TRUE if they are OK.
 */
bool Curl_ipvalid(struct SessionHandle *data)
{
  if(data->set.ip_version == CURL_IPRESOLVE_V6) {
    /* see if we have an IPv6 stack */
    curl_socket_t s = socket(PF_INET6, SOCK_DGRAM, 0);
    if (s == CURL_SOCKET_BAD)
      /* an ipv6 address was requested and we can't get/use one */
      return FALSE;
    sclose(s);
  }
  return TRUE;
}

#if !defined(USE_THREADING_GETADDRINFO) && !defined(CURLRES_ARES)

#ifdef DEBUG_ADDRINFO
static void dump_addrinfo(struct connectdata *conn, const struct addrinfo *ai)
{
  printf("dump_addrinfo:\n");
  for ( ; ai; ai = ai->ai_next) {
    char  buf[INET6_ADDRSTRLEN];

    printf("    fam %2d, CNAME %s, ",
           ai->ai_family, ai->ai_canonname ? ai->ai_canonname : "<none>");
    if (Curl_printable_address(ai, buf, sizeof(buf)))
      printf("%s\n", buf);
    else
      printf("failed; %s\n", Curl_strerror(conn, SOCKERRNO));
  }
}
#else
#define dump_addrinfo(x,y)
#endif

/*
 * Curl_getaddrinfo() when built ipv6-enabled (non-threading and
 * non-ares version).
 *
 * Returns name information about the given hostname and port number. If
 * successful, the 'addrinfo' is returned and the forth argument will point to
 * memory we need to free after use. That memory *MUST* be freed with
 * Curl_freeaddrinfo(), nothing else.
 */
Curl_addrinfo *Curl_getaddrinfo(struct connectdata *conn,
                                const char *hostname,
                                int port,
                                int *waitp)
{
  struct addrinfo hints, *res;
  int error;
  char sbuf[NI_MAXSERV];
  char *sbufptr = NULL;
  char addrbuf[128];
  curl_socket_t s;
  int pf;
  struct SessionHandle *data = conn->data;

  *waitp=0; /* don't wait, we have the response now */

  /* see if we have an IPv6 stack */
  s = socket(PF_INET6, SOCK_DGRAM, 0);
  if (s == CURL_SOCKET_BAD) {
    /* Some non-IPv6 stacks have been found to make very slow name resolves
     * when PF_UNSPEC is used, so thus we switch to a mere PF_INET lookup if
     * the stack seems to be a non-ipv6 one. */

    pf = PF_INET;
  }
  else {
    /* This seems to be an IPv6-capable stack, use PF_UNSPEC for the widest
     * possible checks. And close the socket again.
     */
    sclose(s);

    /*
     * Check if a more limited name resolve has been requested.
     */
    switch(data->set.ip_version) {
    case CURL_IPRESOLVE_V4:
      pf = PF_INET;
      break;
    case CURL_IPRESOLVE_V6:
      pf = PF_INET6;
      break;
    default:
      pf = PF_UNSPEC;
      break;
    }
  }

  memset(&hints, 0, sizeof(hints));
  hints.ai_family = pf;
  hints.ai_socktype = conn->socktype;

  if((1 == Curl_inet_pton(AF_INET, hostname, addrbuf)) ||
     (1 == Curl_inet_pton(AF_INET6, hostname, addrbuf))) {
    /* the given address is numerical only, prevent a reverse lookup */
    hints.ai_flags = AI_NUMERICHOST;
  }
#if 0 /* removed nov 8 2005 before 7.15.1 */
  else
    hints.ai_flags = AI_CANONNAME;
#endif

  if(port) {
    snprintf(sbuf, sizeof(sbuf), "%d", port);
    sbufptr=sbuf;
  }
  error = getaddrinfo(hostname, sbufptr, &hints, &res);
  if (error) {
    infof(data, "getaddrinfo(3) failed for %s:%d\n", hostname, port);
    return NULL;
  }

  dump_addrinfo(conn, res);

  return res;
}
#endif /* !USE_THREADING_GETADDRINFO && !CURLRES_ARES */
#endif /* ipv6 */

