# ASN.1 module ETSI-ITS-DSRC
OID: _{ itu-t (0) identified-organization (4) etsi (0) itsDomain (5) wg1 (1) ts103301 (103301) dsrc (6) version2 (2) }_
## Imports:
* **[ETSI-ITS-CDD](ETSI-ITS-CDD.md)** *{ itu-t (0) identified-organization (4) etsi (0) itsDomain (5) wg1 (1) 102894 cdd (2) major-version-3 (3) minor-version-1 (1) } WITH SUCCESSORS*
* **[ETSI-ITS-DSRC-REGION](ETSI-ITS-DSRC-REGION.md)** *{ itu-t (0) identified-organization (4) etsi (0) itsDomain (5) wg1 (1) ts103301 (103301) dsrc (6) region (1) version2 (2) }*
* **[ElectronicRegistrationIdentificationVehicleDataModule](ElectronicRegistrationIdentificationVehicleDataModule.md)** *{ iso(1) standard(0) iso24534 (24534) vehicleData (1) version1 (1) }*
## Data Elements:
### REG-EXT-ID-AND-TYPE
This information object class is an abstract template to instantiate region extension.
* _id_ of type [**RegionId**](#RegionId) UNIQUE
the identifier of the region type.
* Type
the extension content
**Categories:** Basic Information
**Revision:** _V1.3.1_
```asn1
REG-EXT-ID-AND-TYPE ::= CLASS {
&id RegionId UNIQUE,
&Type
} WITH SYNTAX {&Type IDENTIFIED BY &id}
```
### RegionalExtension
This DF represents a Region extension preceded by its type identifier and a lenght indicator.
It shall include the following components:
* _regionId_ of type [**REG-EXT-ID-AND-TYPE**](ETSI-ITS-DSRC.md#REG-EXT-ID-AND-TYPE) .&id( {Set} )
the identifier of the region.
* _regExtValue_ of type [**REG-EXT-ID-AND-TYPE**](ETSI-ITS-DSRC.md#REG-EXT-ID-AND-TYPE) .&Type( {Set}{@regionId} )
the extension content consistent with the region type.
**Categories:** Basic Information
**Revision:** _V1.3.1_
```asn1
RegionalExtension {REG-EXT-ID-AND-TYPE : Set} ::= SEQUENCE {
regionId REG-EXT-ID-AND-TYPE.&id( {Set} ),
regExtValue REG-EXT-ID-AND-TYPE.&Type( {Set}{@regionId} )
}
```
### MapData
The MapData message is used to convey many types of geographic road information. At the current time its primary
use is to convey one or more intersection lane geometry maps within a single message. The map message content
includes such items as complex intersection descriptions, road segment descriptions, high speed curve outlines (used in
curve safety messages), and segments of roadway (used in some safety applications). A given single MapData message
may convey descriptions of one or more geographic areas or intersections. The contents of this message involve defining
the details of indexing systems that are in turn used by other messages to relate additional information (for example, the
signal phase and timing via the SPAT message) to events at specific geographic locations on the roadway.
Values:
* _timeStamp_ of type [**MinuteOfTheYear**](#MinuteOfTheYear) OPTIONAL
* _msgIssueRevision_ of type [**MsgCount**](#MsgCount)
The MapData revision is defined by the data element `revision` for each intersection
geometry (seeG.8.2.4.1). Therefore, an additional revision indication of the overall
MapData message is not used in this profile. It shall be set to "0" for this profile.
* _layerType_ of type [**LayerType**](#LayerType) OPTIONAL
There is no need to additionally identify the topological content by an additional identifier. The ASN.1
definition of the data frames `intersections` and `roadSegments` are clearly defined and need no
additional identifier. Therefore, this optional data element shall not be used in this profile.
* _layerID_ of type [**LayerID**](#LayerID) OPTIONAL
This profile extends the purpose of the `layerID` data element as defined in SAE J2735⢠as follows: For
large intersections, the length of a MapData description may exceed the maximum data length of the
communication message. Therefore, a fragmentation of the MapData message (at application layer) in
two or more MapData fragments may be executed. If no MapData fragmentation is needed, the `layerID`
shall not be used. For more details, see the definition of the data element [**LayerID**](#LayerID).
* _intersections_ of type [**IntersectionGeometryList**](#IntersectionGeometryList) OPTIONAL
All Intersection definitions.
* _roadSegments_ of type [**RoadSegmentList**](#RoadSegmentList) OPTIONAL
All roadway descriptions.
* _dataParameters_ of type [**DataParameters**](#DataParameters) OPTIONAL
The purpose of usage of `dataParameter` in the MapData message is not defined in SAE J2735â¢.
Therefore, this optional data element shall not be used in this profile.
* _restrictionList_ of type [**RestrictionClassList**](#RestrictionClassList) OPTIONAL
Any restriction ID tables which have established for these map entries
* _regional_ of type **SEQUENCE** (SIZE(1..4)) OF
This profile extends the MapData message with the regional data element [**MapData-addGrpC**](ETSI-ITS-DSRC-AddGrpC.md#MapData-addGrpC)
* **RegionalExtension** {{Reg-MapData}} OPTIONAL
**Categories:** Road topology information
**Revision:** _V1.3.1_
```asn1
MapData ::= SEQUENCE {
timeStamp MinuteOfTheYear OPTIONAL,
msgIssueRevision MsgCount,
layerType LayerType OPTIONAL,
layerID LayerID OPTIONAL,
intersections IntersectionGeometryList OPTIONAL,
roadSegments RoadSegmentList OPTIONAL,
dataParameters DataParameters OPTIONAL,
restrictionList RestrictionClassList OPTIONAL,
regional SEQUENCE (SIZE(1..4)) OF
RegionalExtension {{Reg-MapData}} OPTIONAL,
...
}
```
### RTCMcorrections
The RTCM Corrections message is used to encapsulate RTCM differential corrections for GPS and other radio
navigation signals as defined by the RTCM (Radio Technical Commission For Maritime Services) special committee
number 104 in its various standards. Here, in the work of DSRC, these messages are "wrapped" for transport on the
DSRC media, and then can be re-constructed back into the final expected formats defined by the RTCM standard and
used directly by various positioning systems to increase the absolute and relative accuracy estimates produced.
Values:
* _msgCnt_ of type [**MsgCount**](#MsgCount)
* _rev_ of type [**RTCM-Revision**](#RTCM-Revision)
the specific edition of the standard that is being sent.
* _timeStamp_ of type [**MinuteOfTheYear**](#MinuteOfTheYear) OPTIONAL
* _anchorPoint_ of type [**FullPositionVector**](#FullPositionVector) OPTIONAL
Observer position, if needed.
* _rtcmHeader_ of type [**RTCMheader**](#RTCMheader) OPTIONAL
* _msgs_ of type [**RTCMmessageList**](#RTCMmessageList)
one or more RTCM messages.
* _regional_ of type **SEQUENCE** (SIZE(1..4)) OF
* **RegionalExtension** {{Reg-RTCMcorrections}} OPTIONAL
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
RTCMcorrections ::= SEQUENCE {
msgCnt MsgCount,
rev RTCM-Revision,
timeStamp MinuteOfTheYear OPTIONAL,
anchorPoint FullPositionVector OPTIONAL,
rtcmHeader RTCMheader OPTIONAL,
msgs RTCMmessageList,
regional SEQUENCE (SIZE(1..4)) OF
RegionalExtension {{Reg-RTCMcorrections}} OPTIONAL,
...
}
```
### SPAT
The Signal Phase and Timing (SPAT) message is used to convey the current status of one or more signalized
intersections. Along with the MapData message (which describes a full geometric layout of an intersection) the
receiver of this message can determine the state of the signal phasing and when the next expected phase will occur.
The SPAT message sends the current movement state of each active phase in the system as needed (such as values of
what states are active and values at what time a state has begun/does begin earliest, is expected to begin most likely and
will end latest). The state of inactive movements is not normally transmitted. Movements are mapped to specific
approaches and connections of ingress to egress lanes and by use of the SignalGroupID in the MapData message
The current signal preemption and priority status values (when present or active) are also sent. A more complete
summary of any pending priority or preemption events can be found in the Signal Status message.
Values:
* _timeStamp_ of type [**MinuteOfTheYear**](#MinuteOfTheYear) OPTIONAL
* _name_ of type [**DescriptiveName**](#DescriptiveName) OPTIONAL
* _intersections_ of type [**IntersectionStateList**](#IntersectionStateList)
* _regional_ of type **SEQUENCE** (SIZE(1..4)) OF
* **RegionalExtension** {{Reg-SPAT}} OPTIONAL
* msgs
one or more RTCM messages.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
SPAT ::= SEQUENCE {
timeStamp MinuteOfTheYear OPTIONAL,
name DescriptiveName OPTIONAL,
intersections IntersectionStateList,
regional SEQUENCE (SIZE(1..4)) OF
RegionalExtension {{Reg-SPAT}} OPTIONAL,
...
}
```
### SignalRequestMessage
The Signal Request Message is a message sent by a DSRC equipped entity (such as a vehicle) to the RSU in a
signalized intersection. It is used for either a priority signal request or a preemption signal request depending on the way
each request is set. Each request defines a path through the intersection which is desired in terms of lanes and
approaches to be used. Each request can also contain the time of arrival and the expected duration of the service.
Multiple requests to multiple intersections are supported. The requestor identifies itself in various ways (using methods
supported by the RequestorDescription data frame), and its current speed, heading and location can be placed in this
structure as well. The specific request for service is typically based on previously decoding and examining the list of lanes
and approaches for that intersection (sent in MAP messages). The outcome of all of the pending requests to a signal can
be found in the Signal Status Message (SSM), and may be reflected in the SPAT message contents if successful.
Values:
* _timeStamp_ of type [**MinuteOfTheYear**](#MinuteOfTheYear) OPTIONAL
* _second_ of type [**DSecond**](#DSecond)
* _sequenceNumber_ of type [**MsgCount**](#MsgCount) OPTIONAL
* _requests_ of type [**SignalRequestList**](#SignalRequestList) OPTIONAL
* _requestor_ of type [**RequestorDescription**](#RequestorDescription)
* _regional_ of type **SEQUENCE** (SIZE(1..4)) OF
* **RegionalExtension** {{Reg-SignalRequestMessage}} OPTIONAL
* msgs
one or more RTCM messages.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
SignalRequestMessage ::= SEQUENCE {
timeStamp MinuteOfTheYear OPTIONAL,
second DSecond,
sequenceNumber MsgCount OPTIONAL,
requests SignalRequestList OPTIONAL,
requestor RequestorDescription,
regional SEQUENCE (SIZE(1..4)) OF
RegionalExtension {{Reg-SignalRequestMessage}} OPTIONAL,
...
}
```
### SignalStatusMessage
This DF is a message sent by an RSU in a signalized intersection. It is used to relate the current
status of the signal and the collection of pending or active preemption or priority requests acknowledged by the controller.
It is also used to send information about preemption or priority requests which were denied. This in turn allows a dialog
acknowledgment mechanism between any requester and the signal controller. The data contained in this message allows
other users to determine their "ranking" for any request they have made as well as to see the currently active events.
When there have been no recently received requests for service messages, this message may not be sent. While the
outcome of all pending requests to a signal can be found in the Signal Status Message, the current active event (if any)
will be reflected in the SPAT message contents.
Values:
* _timeStamp_ of type [**MinuteOfTheYear**](#MinuteOfTheYear) OPTIONAL
* _second_ of type [**DSecond**](#DSecond)
* _sequenceNumber_ of type [**MsgCount**](#MsgCount) OPTIONAL
* _status_ of type [**SignalStatusList**](#SignalStatusList)
* _regional_ of type **SEQUENCE** (SIZE(1..4)) OF
* **RegionalExtension** {{Reg-SignalStatusMessage}} OPTIONAL
* msgs
one or more RTCM messages.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
SignalStatusMessage ::= SEQUENCE {
timeStamp MinuteOfTheYear OPTIONAL,
second DSecond,
sequenceNumber MsgCount OPTIONAL,
status SignalStatusList,
regional SEQUENCE (SIZE(1..4)) OF
RegionalExtension {{Reg-SignalStatusMessage}} OPTIONAL,
...
}
```
### AdvisorySpeed
This DF is used to convey a recommended traveling approach speed to an intersection
from the message issuer to various travelers and vehicle types. Besides support for various eco-driving applications, this
allows transmitting recommended speeds for specialty vehicles such as transit buses.
Values:
* _type_ of type [**AdvisorySpeedType**](#AdvisorySpeedType)
* _speed_ of type [**SpeedAdvice**](#SpeedAdvice) OPTIONAL
* _confidence_ of type [**SpeedConfidenceDSRC**](#SpeedConfidenceDSRC) OPTIONAL
* _distance_ of type [**ZoneLength**](#ZoneLength) OPTIONAL
* _class_ of type [**RestrictionClassID**](#RestrictionClassID) OPTIONAL
* _regional_ of type **SEQUENCE** (SIZE(1..4)) OF
* **RegionalExtension** {{Reg-AdvisorySpeed}} OPTIONAL
* msgs
one or more RTCM messages.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
AdvisorySpeed ::= SEQUENCE {
type AdvisorySpeedType,
speed SpeedAdvice OPTIONAL,
confidence SpeedConfidenceDSRC OPTIONAL,
distance ZoneLength OPTIONAL,
class RestrictionClassID OPTIONAL,
regional SEQUENCE (SIZE(1..4)) OF
RegionalExtension {{Reg-AdvisorySpeed}} OPTIONAL,
...
}
```
### AdvisorySpeedList
This DF consists of a list of AdvisorySpeed entries.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
AdvisorySpeedList ::= SEQUENCE (SIZE(1..16)) OF AdvisorySpeed
```
### AntennaOffsetSet
This DF is a collection of three offset values in an orthogonal coordinate system
which describe how far the electrical phase center of an antenna is in each axis from a nearby known anchor point in units
of 1 cm. When the antenna being described is on a vehicle, the signed offset shall be in the coordinate system defined in
section 11.4.
* _antOffsetX_ of type [**Offset-B12**](#Offset-B12)
a range of +- 20.47 meters.
* _antOffsetY_ of type [**Offset-B09**](#Offset-B09)
a range of +- 2.55 meters.
* _antOffsetZ_ of type [**Offset-B10**](#Offset-B10)
a range of +- 5.11 meters.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
AntennaOffsetSet ::= SEQUENCE {
antOffsetX Offset-B12,
antOffsetY Offset-B09,
antOffsetZ Offset-B10
}
```
### ComputedLane
This DE is used to contain information needed to compute one lane from another
(hence the name). This concept is used purely as a means of saving size in the message payload. The new lane is
expressed as an X,Y offset from the first point of the source lane. It can be optionally rotated and scaled. Any attribute
information found within the node of the source lane list cannot be changed and must be reused.
Values:
* _referenceLaneId_ of type [**LaneID**](ETSI-ITS-DSRC.md#LaneID)
the lane ID upon which this computed lane will be based Lane Offset in X and Y direction
offsetXaxis
CHOICE {
small
DrivenLineOffsetSm,
large
DrivenLineOffsetLg
},
offsetYaxis
CHOICE {
small
DrivenLineOffsetSm,
large
DrivenLineOffsetLg
},
-- A path X offset value for translations of the
-- path's points when creating translated lanes.2016-05-19; Venus, Michael; SIEMENS, RC-DE MO ITS-TS SD
-- The values found in the reference lane are
-- all offset based on the X and Y values from
-- the coordinates of the reference lane's
-- initial path point.
-- Lane Rotation
rotateXY
Angle OPTIONAL,
-- A path rotation value for the entire lane
-- Observe that this rotates the existing orientation
-- of the referenced lane, it does not replace it.
-- Rotation occurs about the initial path point.
-- Lane Path Scale (zooming)
scaleXaxis
Scale-B12 OPTIONAL,
scaleYaxis
Scale-B12 OPTIONAL,
-- value for translations or zooming of the path's
-- points. The values found in the reference lane
-- are all expanded or contracted based on the X
-- and Y and width values from the coordinates of
-- the reference lane's initial path point.
-- The Z axis remains untouched.
* _offsetXaxis_ of type [**CHOICE**](#CHOICE) {
small DrivenLineOffsetSm,
large DrivenLineOffsetLg
}
* _offsetYaxis_ of type [**CHOICE**](#CHOICE) {
small DrivenLineOffsetSm,
large DrivenLineOffsetLg
}
* _rotateXY_ of type [**Angle**](#Angle) OPTIONAL
* _scaleXaxis_ of type [**Scale-B12**](#Scale-B12) OPTIONAL
* _scaleYaxis_ of type [**Scale-B12**](#Scale-B12) OPTIONAL
* _regional_ of type **SEQUENCE** (SIZE(1..4)) OF
* **RegionalExtension** {{Reg-ComputedLane}} OPTIONAL
* xxxxx
.
Remarks: The specified transformation shall be applied to the reference lane without any intermediary loss of precision
(truncation). The order of the transformations shall be: the East-West and North-South offsets, the scaling factors, and
finally the rotation.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
ComputedLane ::= SEQUENCE {
referenceLaneId LaneID,
offsetXaxis CHOICE {
small DrivenLineOffsetSm,
large DrivenLineOffsetLg
},
offsetYaxis CHOICE {
small DrivenLineOffsetSm,
large DrivenLineOffsetLg
},
rotateXY Angle OPTIONAL,
scaleXaxis Scale-B12 OPTIONAL,
scaleYaxis Scale-B12 OPTIONAL,
regional SEQUENCE (SIZE(1..4)) OF
RegionalExtension {{Reg-ComputedLane}} OPTIONAL,
...
}
```
### ConnectsToList
This DE is used in the generic lane descriptions to provide a sequence of other defined
lanes to which each lane connects beyond its stop point. See the Connection data frame entry for details. Note that this
data frame is not used in some lane object types.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
>>>
NOTE: The assignment of lanes in the Connection structure shall start with the leftmost lane from the vehicle
perspective (the u-turn lane in some cases) followed by subsequent lanes in a clockwise assignment order. Therefore, the
rightmost lane to which this lane connects would always be listed last. Note that this order is observed regardless of which
side of the road vehicles use. If this structure is used in the lane description, then all valid lanes to which the subject lane
connects shall be listed.
>>>
```asn1
ConnectsToList ::= SEQUENCE (SIZE(1..16)) OF Connection
```
### ConnectingLane
The data concept ties a single lane to a single maneuver needed to reach it from another lane.
It is typically used to connect the allowed maneuver from the end of a lane to the outbound lane so that these can be
mapped to the SPAT message to which both lanes apply.
* _lane_ of type [**LaneID**](ETSI-ITS-DSRC.md#LaneID)
Index of the connecting lane.
* _maneuver_ of type [**AllowedManeuvers**](#AllowedManeuvers) OPTIONAL
This data element allows only the description of a subset of possible manoeuvres and therefore
represents an incomplete list of possible travel directions. The connecting `lane` data element gives the
exact information about the manoeuvre relation from ingress to egress lane. Therefore the "maneuver"
data element may be used only additionally if the travel direction of the manoeuvre is unanmbigoulsy
represented (e.g. left, right, straight, etc.).
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
ConnectingLane ::= SEQUENCE {
lane LaneID,
maneuver AllowedManeuvers OPTIONAL
}
```
### Connection
This DF is used to combine/connect multiple physical lanes (i.e. within intersections or road
segments). For signalized movements, the `connectsTo` data frame defines e.g. the relation between
ingress and egress lanes within an intersection. It describes the allowed manoeuvres and includes the
link (`signalGroup` identifier) between the [**MapData**](#MapData) and the [**PAT**](#PAT) message. The data frame is also used
to describe the relation of lanes within a non signalized intersection (e.g. ingress lanes which are
bypassing the conflict area and ending in an egress lane without signalization). Within a road segment,
it is used to combine two or multiple physical lanes into a single lane object.
* _connectingLane_ of type [**ConnectingLane**](#ConnectingLane)
* _remoteIntersection_ of type [**IntersectionReferenceID**](#IntersectionReferenceID) OPTIONAL
When the data element `remoteIntersection` is used, it indicates
that the connecting lane belongs to another intersection. (see clause G.9.1 for further explannations).
* _signalGroup_ of type [**SignalGroupID**](ETSI-ITS-DSRC.md#SignalGroupID) OPTIONAL
* _userClass_ of type [**RestrictionClassID**](#RestrictionClassID) OPTIONAL
* _connectionID_ of type [**LaneConnectionID**](ETSI-ITS-DSRC.md#LaneConnectionID) OPTIONAL
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
Connection ::= SEQUENCE {
connectingLane ConnectingLane,
remoteIntersection IntersectionReferenceID OPTIONAL,
signalGroup SignalGroupID OPTIONAL,
userClass RestrictionClassID OPTIONAL,
connectionID LaneConnectionID OPTIONAL
}
```
### ConnectionManeuverAssist
This DF contains information about the the dynamic flow of traffic for the lane(s)
and maneuvers in question (as determined by the LaneConnectionID). Note that this information can be sent regarding
any lane-to-lane movement; it need not be limited to the lanes with active (non-red) phases when sent.
Values:
* _connectionID_ of type [**LaneConnectionID**](ETSI-ITS-DSRC.md#LaneConnectionID)
the common connectionID used by all lanes to which this data applies
(this value traces to ConnectsTo entries in lanes)
* _queueLength_ of type [**ZoneLength**](#ZoneLength) OPTIONAL
Unit = 1 meter, 0 = no queue
The distance from the stop line to the back
edge of the last vehicle in the queue,
as measured along the lane center line.
* _availableStorageLength_ of type [**ZoneLength**](#ZoneLength) OPTIONAL
Unit = 1 meter, 0 = no space remains
Distance (e.g. beginning from the downstream
stop-line up to a given distance) with a high
probability for successfully executing the
connecting maneuver between the two lanes
during the current cycle.
Used for enhancing the awareness of vehicles
to anticipate if they can pass the stop line
of the lane. Used for optimizing the green wave,
due to knowledge of vehicles waiting in front
of a red light (downstream).
The element nextTime in TimeChangeDetails
in the containing data frame contains the next
timemark at which an active phase is expected,
a form of storage flush interval.
* _waitOnStop_ of type [**WaitOnStopline**](#WaitOnStopline) OPTIONAL
If "true", the vehicles on this specific connecting
maneuver have to stop on the stop-line and not
to enter the collision area
* _pedBicycleDetect_ of type [**PedestrianBicycleDetect**](#PedestrianBicycleDetect) OPTIONAL
true if ANY ped or bicycles are detected crossing
the above lanes. Set to false ONLY if there is a
high certainty that there are none present,
otherwise element is not sent.
* _regional_ of type **SEQUENCE** (SIZE(1..4)) OF
This data element includes additional data content [**ConnectionManeuverAssist-addGrpC**](ETSI-ITS-DSRC-AddGrpC.md#ConnectionManeuverAssist-addGrpC) defined in
this profile (see G.5.1.1). The content is included using the regional extension framework as defined in
* **RegionalExtension** {{Reg-ConnectionManeuverAssist}} OPTIONAL
[**ConnectionManeuverAssist-addGrpC**](ETSI-ITS-DSRC-AddGrpC.md#ConnectionManeuverAssist-addGrpC) is used for position feedback to moving ITS stations for executing
safe manoeuvres and is included for this purpose in the data element "intersectionState"
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
ConnectionManeuverAssist ::= SEQUENCE {
connectionID LaneConnectionID,
queueLength ZoneLength OPTIONAL,
availableStorageLength ZoneLength OPTIONAL,
waitOnStop WaitOnStopline OPTIONAL,
pedBicycleDetect PedestrianBicycleDetect OPTIONAL,
regional SEQUENCE (SIZE(1..4)) OF
RegionalExtension {{Reg-ConnectionManeuverAssist}} OPTIONAL,
...
}
```
### DataParameters
This DF is used to provide basic (static) information on how a map fragment was processed or determined.
* _processMethod_ of type [**IA5String**](#IA5String) (SIZE(1..255)) OPTIONAL
* _processAgency_ of type [**IA5String**](#IA5String) (SIZE(1..255)) OPTIONAL
* _lastCheckedDate_ of type [**IA5String**](#IA5String) (SIZE(1..255)) OPTIONAL
* _geoidUsed_ of type [**IA5String**](#IA5String) (SIZE(1..255)) OPTIONAL
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
DataParameters ::= SEQUENCE {
processMethod IA5String(SIZE(1..255)) OPTIONAL,
processAgency IA5String(SIZE(1..255)) OPTIONAL,
lastCheckedDate IA5String(SIZE(1..255)) OPTIONAL,
geoidUsed IA5String(SIZE(1..255)) OPTIONAL,
...
}
```
### DDateTime
The DSRC style date is a compound value consisting of finite-length sequences of integers (not characters) of the
form: "yyyy, mm, dd, hh, mm, ss (sss+)" - as defined below.
* _year_ of type [**DYear**](#DYear) OPTIONAL
* _month_ of type [**DMonth**](#DMonth) OPTIONAL
* _day_ of type [**DDay**](#DDay) OPTIONAL
* _hour_ of type [**DHour**](#DHour) OPTIONAL
* _minute_ of type [**DMinute**](#DMinute) OPTIONAL
* _second_ of type [**DSecond**](#DSecond) OPTIONAL
* _offset_ of type [**DOffset**](#DOffset) OPTIONAL
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
>>>
NOTE: Note that some elements of this structure may not be sent when not needed. At least one element shall be present.
>>>
```asn1
DDateTime ::= SEQUENCE {
year DYear OPTIONAL,
month DMonth OPTIONAL,
day DDay OPTIONAL,
hour DHour OPTIONAL,
minute DMinute OPTIONAL,
second DSecond OPTIONAL,
offset DOffset OPTIONAL
}
```
### EnabledLaneList
This DF is a sequence of lane IDs for lane objects that are activated in the current map
configuration. These lanes, unlike most lanes, have their RevocableLane bit set to one (asserted). Such lanes are not
considered to be part of the current map unless they are in the Enabled Lane List. This concept is used to describe all the
possible regulatory states for a given physical lane. For example, it is not uncommon to enable or disable the ability to
make a right hand turn on red during different periods of a day. Another similar example would be a lane which is used for
driving during one period and where parking is allowed at another. Traditionally, this information is conveyed to the vehicle
driver by local signage. By using the Enabled Lane List data frame in conjunction with the RevocableLane bit and
constructing a separate lane object in the intersection map for each different configuration, a single unified map can be
developed and used.
Contents are the unique ID numbers for each lane object which is 'active' as part of the dynamic map contents.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
EnabledLaneList ::= SEQUENCE (SIZE(1..16)) OF LaneID
```
### FullPositionVector
A complete report of the vehicle's position, speed, and heading at an instant in time. Used in the probe vehicle
message (and elsewhere) as the initial position information. Often followed by other data frames that may provide offset
path data.
* _utcTime_ of type [**DDateTime**](#DDateTime) OPTIONAL
time with mSec precision
* _long_ of type [**Longitude**](ETSI-ITS-CDD.md#Longitude)
Longitude in 1/10th microdegree
* _lat_ of type [**Latitude**](ETSI-ITS-CDD.md#Latitude)
Latitude in 1/10th microdegree
* _elevation_ of type [**Elevation**](#Elevation) OPTIONAL
Elevation in units of 0.1 m
* _heading_ of type [**HeadingDSRC**](#HeadingDSRC) OPTIONAL
* _speed_ of type [**TransmissionAndSpeed**](#TransmissionAndSpeed) OPTIONAL
* _posAccuracy_ of type [**PositionalAccuracy**](#PositionalAccuracy) OPTIONAL
* _timeConfidence_ of type [**TimeConfidence**](#TimeConfidence) OPTIONAL
* _posConfidence_ of type [**PositionConfidenceSet**](#PositionConfidenceSet) OPTIONAL
* _speedConfidence_ of type [**SpeedandHeadingandThrottleConfidence**](#SpeedandHeadingandThrottleConfidence) OPTIONAL
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
FullPositionVector ::= SEQUENCE {
utcTime DDateTime OPTIONAL,
long Longitude,
lat Latitude,
elevation Elevation OPTIONAL,
heading HeadingDSRC OPTIONAL,
speed TransmissionAndSpeed OPTIONAL,
posAccuracy PositionalAccuracy OPTIONAL,
timeConfidence TimeConfidence OPTIONAL,
posConfidence PositionConfidenceSet OPTIONAL,
speedConfidence SpeedandHeadingandThrottleConfidence OPTIONAL,
...
}
```
### GenericLane
This DF is used for all types of lanes, e.g. motorized vehicle lanes, crosswalks, medians. The
GenericLane describes the basic attribute information of the lane. The LaneID value for each lane is unique within an
intersection. One use for the LaneID is in the SPAT message, where a given signal or movement phase is mapped to a
set of applicable lanes using their respective LaneIDs. The NodeList2 data frame includes a sequence of offset points (or
node points) representing the center line path of the lane. As described in this standard, node points are sets of variable
sized delta orthogonal offsets from the prior point in the node path. (The initial point is offset from the LLH anchor point
used in the intersection.) Each node point may convey optional attribute data as well. The use of attributes is described
further in the Node definition, and in a later clause, but an example use would be to indicate a node point where the lane
width changes.
It should be noted that a "lane" is an abstract concept that can describe objects other than motorized vehicle lanes, and
that the generic lane structure (using features drawn from Japanese usage) also allows combining multiple physical lanes
into a single lane object. In addition, such lanes can describe connectivity points with other lanes beyond a single
intersection, extending such a lane description over multiple nearby physical intersections and side streets which
themselves may not be equipped or assigned an index number in the regional intersection numbering system. (See the
ConnectsTo entry for details) This has value when describing a broader service area in terms of the roadway network,
probably with less precision and detail.
Values:
* _laneID_ of type [**LaneID**](ETSI-ITS-DSRC.md#LaneID)
The unique ID number assigned to this lane object
* _name_ of type [**DescriptiveName**](#DescriptiveName) OPTIONAL
often for debug use only but at times used to name ped crossings
* _ingressApproach_ of type [**ApproachID**](#ApproachID) OPTIONAL
inbound Approach ID to which this lane belongs
* _egressApproach_ of type [**ApproachID**](#ApproachID) OPTIONAL
outbound Approach ID to which this lane belongs
* _laneAttributes_ of type [**LaneAttributes**](#LaneAttributes)
All Attribute information about the basic selected lane type
Directions of use, Geometric co-sharing and Type Specific Attributes
These Attributes are 'lane - global' that is, they are true for the entire length of the lane
* _maneuvers_ of type [**AllowedManeuvers**](#AllowedManeuvers) OPTIONAL
This data element allows only the description of a subset of possible manoeuvres and therefore
reperesents an incomplete list of possible travel directions. The connecting `lane` data element gives
the exact information about the manoeuvre relation from ingress to egress lane. Therefore the
"maneuver" data element is used only additionally if the travel direction of the manoeuvre is
* _nodeList_ of type [**NodeListXY**](#NodeListXY)
Lane spatial path information as well as various Attribute information along the node path
Attributes found here are more general and may come and go over the length of the lane.
* _connectsTo_ of type [**ConnectsToList**](#ConnectsToList) OPTIONAL
a list of other lanes and their signal group IDs each connecting lane and its signal group ID
is given, therefore this element provides the information formerly in "signalGroups" in prior editions.
* _overlays_ of type [**OverlayLaneList**](#OverlayLaneList) OPTIONAL
A list of any lanes which have spatial paths that overlay (run on top of, and not simply cross)
the path of this lane when used
* _regional_ of type **SEQUENCE** (SIZE(1..4)) OF
* **RegionalExtension** {{Reg-GenericLane}} OPTIONAL
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
>>>
NOTE: The data elements `ingressApproach` and `egressApproach` are used for grouping lanes whin an
approach (e.g. lanes defined in travel direction towards the intersection, lanes in exiting direction and
cross walks). For a bidirectrional lane (e.g. bike lane) both dataelements are used for the same lane. The
integer value used for identifying the `ingressApproach` and the `egressAproach`, based on the
topology, may be e.g. the same for all lanes within an approach of an intersection.
>>>
```asn1
GenericLane ::= SEQUENCE {
laneID LaneID,
name DescriptiveName OPTIONAL,
ingressApproach ApproachID OPTIONAL,
egressApproach ApproachID OPTIONAL,
laneAttributes LaneAttributes,
maneuvers AllowedManeuvers OPTIONAL,
nodeList NodeListXY,
connectsTo ConnectsToList OPTIONAL,
overlays OverlayLaneList OPTIONAL,
regional SEQUENCE (SIZE(1..4)) OF
RegionalExtension {{Reg-GenericLane}} OPTIONAL,
...
}
```
### IntersectionAccessPoint
This DF is used to specify the index of either a single approach or a single lane at
which a service is needed. This is used, for example, with the Signal Request Message (SRM) to indicate the inbound
and outbound points by which the requestor (such as a public safety vehicle) can traverse an intersection.
* _lane_ of type [**LaneID**](ETSI-ITS-DSRC.md#LaneID)
* _approach_ of type [**ApproachID**](#ApproachID)
* _connection_ of type [**LaneConnectionID**](ETSI-ITS-DSRC.md#LaneConnectionID)
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
>>>
NOTE: Note that the value of zero has a reserved meaning for these two indexing systems. In both cases, this value
is used to indicate the concept of "none" in use. When the value is of zero is used here, it implies the center of the
intersection itself. For example, requesting an outbound point of zero implies the requestor wishes to have the intersection
itself be the destination. Alternatively, an inbound value of zero implies the requestor is within the intersection itself and
wishes to depart for the outbound value provided. This special meaning for the value zero can be used in either the lane
or approach with the same results.
>>>
```asn1
IntersectionAccessPoint ::= CHOICE {
lane LaneID,
approach ApproachID,
connection LaneConnectionID,
...
}
```
### IntersectionGeometry
A complete description of an intersection's roadway geometry and its allowed navigational paths (independent of
any additional regulatory restrictions that may apply over time or from user classification).
Values:
* _name_ of type [**DescriptiveName**](#DescriptiveName) OPTIONAL
For debug use only
* _id_ of type [**IntersectionReferenceID**](#IntersectionReferenceID)
A globally unique value set, consisting of a regionID and intersection ID assignment
* _revision_ of type [**MsgCount**](#MsgCount)
This profile extends the purpose of the `revision` data element as defined in SAE J2735⢠as follows.
The revision data element is used to communicate the valid release of the intersection geometry
description. If there are no changes in the deployed intersection description, the same revision counter
is transmitted. Due to a revised deployment of the intersection description (e.g. new lane added, ID's
changed, etc.), the revision is increased by one. After revision equal to 127, the increment restarts by 0.
The intersection geometry and the signal phase and timing information is related each other. Therefore,
the revision of the intersection geometry of the MapData message shall be the same as the revision of
the intersection state of the SPAT (see data element `revision` of `DF_IntersectionState` in G.8.2.9)
* _refPoint_ of type [**Position3D**](#Position3D)
The reference from which subsequent data points are offset until a new point is used.
* _laneWidth_ of type [**LaneWidth**](#LaneWidth) OPTIONAL
Reference width used by all subsequent lanes unless a new width is given
* _speedLimits_ of type [**SpeedLimitList**](#SpeedLimitList) OPTIONAL
Reference regulatory speed limits used by all subsequent lanes unless a new speed is given
* _laneSet_ of type [**LaneList**](#LaneList)
Data about one or more lanes (all lane data is found here) Data describing how to use and request preemption and
priority services from this intersection (if supported)
* _preemptPriorityData_ of type [**PreemptPriorityList**](#PreemptPriorityList) OPTIONAL
This DF is not used.
* _regional_ of type **SEQUENCE** (SIZE(1..4)) OF
* **RegionalExtension** {{Reg-IntersectionGeometry}} OPTIONAL
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
IntersectionGeometry ::= SEQUENCE {
name DescriptiveName OPTIONAL,
id IntersectionReferenceID,
revision MsgCount,
refPoint Position3D,
laneWidth LaneWidth OPTIONAL,
speedLimits SpeedLimitList OPTIONAL,
laneSet LaneList,
preemptPriorityData PreemptPriorityList OPTIONAL,
regional SEQUENCE (SIZE(1..4)) OF
RegionalExtension {{Reg-IntersectionGeometry}} OPTIONAL,
...
}
```
### IntersectionGeometryList
The IntersectionGeometryList data frame consists of a list of IntersectionGeometry entries.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
IntersectionGeometryList ::= SEQUENCE (SIZE(1..32)) OF IntersectionGeometry
```
### IntersectionReferenceID
The IntersectionReferenceID data frame conveys the combination of an optional RoadRegulatorID and of an
IntersectionID that is unique within that region. When the RoadRegulatorID is present the IntersectionReferenceID is
guaranteed to be globally unique.
* _region_ of type [**RoadRegulatorID**](#RoadRegulatorID) OPTIONAL
a globally unique regional assignment value typical assigned to a regional DOT authority
the value zero shall be used for testing needs
* _id_ of type [**IntersectionID**](ETSI-ITS-DSRC.md#IntersectionID)
a unique mapping to the intersection in question within the above region of use
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
>>>
NOTE: A fully qualified intersection consists of its regionally unique ID (the IntersectionID) and its region ID (the
RoadRegulatorID). Taken together these form a unique value which is never repeated.
>>>
```asn1
IntersectionReferenceID ::= SEQUENCE {
region RoadRegulatorID OPTIONAL,
id IntersectionID
}
```
### IntersectionState
The IntersectionState data frame is used to convey all the SPAT information for a single intersection. Both current
and future data can be sent.
Values:
* _name_ of type [**DescriptiveName**](#DescriptiveName) OPTIONAL
human readable name for intersection to be used only in debug mode
* _id_ of type [**IntersectionReferenceID**](#IntersectionReferenceID)
A globally unique value set, consisting of a regionID and intersection ID assignment
provides a unique mapping to the intersection MAP in question which provides complete location
and approach/move/lane data
* _revision_ of type [**MsgCount**](#MsgCount)
The data element `revision` is used to communicate the actual valid release of the intersection
description. If there are no changes in the deployed intersection description, almost the same revision
counter is transmitted. Due to a revised deployment of the intersection description (e.g. introduction of
additional signal state element), the revision is increased by one. After revision equal to 127, the
increment leads to 0 (due to the element range).
The intersection state and the intersection geometry is related to each other. Therefore, the revision of
the intersection state shall be the same as the revision of the intersection geometry (see the data
element `revision` of `DF_IntersectionGeometry` in G.8.2.6).
* _status_ of type [**IntersectionStatusObject**](#IntersectionStatusObject)
general status of the controller(s)
* _moy_ of type [**MinuteOfTheYear**](#MinuteOfTheYear) OPTIONAL
Minute of current UTC year, used only with messages to be archived.
* _timeStamp_ of type [**DSecond**](#DSecond) OPTIONAL
the mSec point in the current UTC minute that this message was constructed.
* _enabledLanes_ of type [**EnabledLaneList**](#EnabledLaneList) OPTIONAL
a list of lanes where the RevocableLane bit has been set which are now active and
therefore part of the current intersection
* _states_ of type [**MovementList**](#MovementList)
Each Movement is given in turn and contains its signal phase state,
mapping to the lanes it applies to, and point in time it will end, and it
may contain both active and future states
* _maneuverAssistList_ of type [**ManeuverAssistList**](#ManeuverAssistList) OPTIONAL
Assist data
* _regional_ of type **SEQUENCE** (SIZE(1..4)) OF
* **RegionalExtension** {{Reg-IntersectionState}} OPTIONAL
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
IntersectionState ::= SEQUENCE {
name DescriptiveName OPTIONAL,
id IntersectionReferenceID,
revision MsgCount,
status IntersectionStatusObject,
moy MinuteOfTheYear OPTIONAL,
timeStamp DSecond OPTIONAL,
enabledLanes EnabledLaneList OPTIONAL,
states MovementList,
maneuverAssistList ManeuverAssistList OPTIONAL,
regional SEQUENCE (SIZE(1..4)) OF
RegionalExtension {{Reg-IntersectionState}} OPTIONAL,
...
}
```
### IntersectionStateList
This DF consists of a list of IntersectionState entries.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
IntersectionStateList ::= SEQUENCE (SIZE(1..32)) OF IntersectionState
```
### LaneAttributes
This DF holds all of the constant attribute information of any lane object (as well as
denoting the basic lane type itself) within a single structure. Constant attribute information are those values which do not
change over the path of the lane, such as the direction of allowed travel. Other lane attribute information can change at or
between each node.
The structure consists of three element parts as follows: LaneDirection specifies the allowed directions of travel, if any.
LaneSharing indicates whether this lane type is shared with other types of travel modes or users. The lane type is defined
in LaneTypeAttributes, along with additional attributes specific to that type.
The fundamental type of lane object is described by the element selected in the LaneTypeAttributes data concept.
Additional information specific or unique to a given lane type can be found there as well. A regional extension is provided
as well.
Note that combinations of regulatory maneuver information such as "both a left turn and straight ahead movement are
allowed, but never a u-turn," are expressed by the AllowedManeuvers data concept which typically follows after this
element and in the same structure. Note that not all lane objects require this information (for example a median). The
various values are set via bit flags to indicate the assertion of a value. Each defined lane type contains the bit flags
suitable for its application area.
Note that the concept of LaneSharing is used to indicate that there are other users of this lane with equal regulatory rights
to occupy the lane (which is a term this standard does not formally define since it varies by world region). A typical case is
a light rail vehicle running along the same lane path as motorized traffic. In such a case, motor traffic may be allowed
equal access to the lane when a train is not present. Another case would be those intersection lanes (at the time of writing
rather unusual) where bicycle traffic is given full and equal right of way to an entire width of motorized vehicle lane. This
example would not be a bike lane or bike box in the traditional sense.
@field: directionalUse: directions of lane use
@field: sharedWith: co-users of the lane path
@field: laneType: specific lane type data
* _directionalUse_ of type [**LaneDirection**](#LaneDirection)
* _sharedWith_ of type [**LaneSharing**](#LaneSharing)
* _laneType_ of type [**LaneTypeAttributes**](#LaneTypeAttributes)
* _regional_ of type [**RegionalExtension**](#RegionalExtension) {{Reg-LaneAttributes}} OPTIONAL
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
LaneAttributes ::= SEQUENCE {
directionalUse LaneDirection,
sharedWith LaneSharing,
laneType LaneTypeAttributes,
regional RegionalExtension {{Reg-LaneAttributes}} OPTIONAL
}
```
### LaneDataAttribute
This DF is used to relate an attribute and a control value at a node point or along a
lane segment from an enumerated list of defined choices. It is then followed by a defined data value associated with it and
which is defined elsewhere in this standard.
Values:
* _pathEndPointAngle_ of type [**DeltaAngle**](#DeltaAngle)
adjusts final point/width slant of the lane to align with the stop line
* _laneCrownPointCenter_ of type [**RoadwayCrownAngle**](#RoadwayCrownAngle)
sets the canter of the road bed from centerline point
* _laneCrownPointLeft_ of type [**RoadwayCrownAngle**](#RoadwayCrownAngle)
sets the canter of the road bed from left edge
* _laneCrownPointRight_ of type [**RoadwayCrownAngle**](#RoadwayCrownAngle)
sets the canter of the road bed from right edge
* _laneAngle_ of type [**MergeDivergeNodeAngle**](#MergeDivergeNodeAngle)
the angle or direction of another lane this is required to support Japan style
when a merge point angle is required
* _speedLimits_ of type [**SpeedLimitList**](#SpeedLimitList)
Reference regulatory speed limits used by all segments
* _regional_ of type **SEQUENCE** (SIZE(1..4)) OF
* **RegionalExtension** {{Reg-LaneDataAttribute}}
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
>>>
NOTE: This data concept handles a variety of use case needs with a common and consistent message pattern. The
typical use of this data concept (and several similar others) is to inject the selected Attribute into the spatial description of
a lane's center line path (the segment list). In this way, attribute information which is true for a portion of the overall lane
can be described when needed. This attribute information applies from the node point in the stream of segment data until
changed again. Denoting the porous aspects of a lane along its path as it merges with another lane would be an example
of this use case. In this case the start and end node points would be followed by suitable segment attributes. Re-using a
lane path (previously called a computed lane) is another example. In this case the reference lane to be re-used appears
as a segment attribute followed by the lane value. It is then followed by one or more segment attributes which relate the
positional translation factors to be used (offset, rotate, scale) and any further segment attribute changes.
>>>
```asn1
LaneDataAttribute ::= CHOICE {
pathEndPointAngle DeltaAngle,
laneCrownPointCenter RoadwayCrownAngle,
laneCrownPointLeft RoadwayCrownAngle,
laneCrownPointRight RoadwayCrownAngle,
laneAngle MergeDivergeNodeAngle,
speedLimits SpeedLimitList,
regional SEQUENCE (SIZE(1..4)) OF
RegionalExtension {{Reg-LaneDataAttribute}},
...
}
```
### LaneDataAttributeList
The LaneDataAttributeList data frame consists of a list of LaneDataAttribute entries.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
LaneDataAttributeList ::= SEQUENCE (SIZE(1..8)) OF LaneDataAttribute
```
### LaneList
The LaneList data frame consists of a list of GenericLane entries.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
LaneList ::= SEQUENCE (SIZE(1..255)) OF GenericLane
```
### LaneSharing
This DE is used to denote the presence of other user types (travel modes) who have an
equal right to access and use the lane. There may also be another lane object describing their use of a lane. This data
concept is used to indicate lanes and/or users that travel along the same path, and not those that simply cross over the
lane's segments path (such as a pedestrian crosswalk crossing a lane for motor vehicle use). The typical use is to alert
the user of the MAP data that additional traffic of another mode may be present in the same spatial lane.
Bits used:
- 0 - overlappingLaneDescriptionProvided: Assert when another lane object is present to describe the
path of the overlapping shared lane this construct is not used for lane objects which simply cross
- 1 - multipleLanesTreatedAsOneLane: Assert if the lane object path and width details represents multiple lanes within it
that are not further described Various modes and type of traffic that may share this lane:
- 2 - otherNonMotorizedTrafficTypes: horse drawn etc.
- 3 - individualMotorizedVehicleTraffic:
- 4 - busVehicleTraffic:
- 5 - taxiVehicleTraffic:
- 6 - pedestriansTraffic:
- 7 - cyclistVehicleTraffic:
- 8 - trackedVehicleTraffic:
- 9 - pedestrianTraffic:
Values:
* **overlappingLaneDescriptionProvided** (0)
* **multipleLanesTreatedAsOneLane** (1)
* **otherNonMotorizedTrafficTypes** (2)
* **individualMotorizedVehicleTraffic** (3)
* **busVehicleTraffic** (4)
* **taxiVehicleTraffic** (5)
* **pedestriansTraffic** (6)
* **cyclistVehicleTraffic** (7)
* **trackedVehicleTraffic** (8)
* **pedestrianTraffic** (9)
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
>>>
NOTE: All zeros would indicate `not shared` and `not overlapping`
>>>
```asn1
LaneSharing ::= BIT STRING {
overlappingLaneDescriptionProvided (0),
multipleLanesTreatedAsOneLane (1),
otherNonMotorizedTrafficTypes (2),
individualMotorizedVehicleTraffic (3),
busVehicleTraffic (4),
taxiVehicleTraffic (5),
pedestriansTraffic (6),
cyclistVehicleTraffic (7),
trackedVehicleTraffic (8),
pedestrianTraffic (9)
} (SIZE (10))
```
### LaneTypeAttributes
This DF is used to hold attribute information specific to a given lane type. It is typically
used in the DE_LaneAttributes data frame as part of an overall description of a lane object. Information unique to the
specific type of lane is found here. Information common to lanes is expressed in other entries. The various values are set
by bit flags to indicate the assertion of a value. Each defined lane type contains bit flags suitable for its application area.
* _vehicle_ of type [**LaneAttributes-Vehicle**](#LaneAttributes-Vehicle)
motor vehicle lanes
* _crosswalk_ of type [**LaneAttributes-Crosswalk**](#LaneAttributes-Crosswalk)
pedestrian crosswalks
* _bikeLane_ of type [**LaneAttributes-Bike**](#LaneAttributes-Bike)
bike lanes
* _sidewalk_ of type [**LaneAttributes-Sidewalk**](#LaneAttributes-Sidewalk)
pedestrian sidewalk paths
* _median_ of type [**LaneAttributes-Barrier**](#LaneAttributes-Barrier)
medians & channelization
* _striping_ of type [**LaneAttributes-Striping**](#LaneAttributes-Striping)
roadway markings
* _trackedVehicle_ of type [**LaneAttributes-TrackedVehicle**](#LaneAttributes-TrackedVehicle)
trains and trolleys
* _parking_ of type [**LaneAttributes-Parking**](#LaneAttributes-Parking)
parking and stopping lanes
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
LaneTypeAttributes ::= CHOICE {
vehicle LaneAttributes-Vehicle,
crosswalk LaneAttributes-Crosswalk,
bikeLane LaneAttributes-Bike,
sidewalk LaneAttributes-Sidewalk,
median LaneAttributes-Barrier,
striping LaneAttributes-Striping,
trackedVehicle LaneAttributes-TrackedVehicle,
parking LaneAttributes-Parking,
...
}
```
### ManeuverAssistList
This DF consists of a list of [**ConnectionManeuverAssist**](#ConnectionManeuverAssist) entries.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
ManeuverAssistList ::= SEQUENCE (SIZE(1..16)) OF ConnectionManeuverAssist
```
### MovementEvent
This DF contains details about a single movement. It is used by the movement state to
convey one of number of movements (typically occurring over a sequence of times) for a SignalGroupID.
@field `eventState`: Consisting of: Phase state (the basic 11 states), Directional, protected, or permissive state
@field `timing`: Timing Data in UTC time stamps for event includes start and min/max end times of phase confidence and estimated next occurrence
@field `speeds`: various speed advisories for use by general and specific types of vehicles supporting green-wave and other flow needs
Values:
* _eventState_ of type [**MovementPhaseState**](#MovementPhaseState)
* _timing_ of type [**TimeChangeDetails**](#TimeChangeDetails) OPTIONAL
* _speeds_ of type [**AdvisorySpeedList**](#AdvisorySpeedList) OPTIONAL
* _regional_ of type **SEQUENCE** (SIZE(1..4)) OF
* **RegionalExtension** {{Reg-MovementEvent}} OPTIONAL
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
MovementEvent ::= SEQUENCE {
eventState MovementPhaseState,
timing TimeChangeDetails OPTIONAL,
speeds AdvisorySpeedList OPTIONAL,
regional SEQUENCE (SIZE(1..4)) OF
RegionalExtension {{Reg-MovementEvent}} OPTIONAL,
...
}
```
### MovementEventList
This DF consists of a list of [**MovementEvent**](#MovementEvent) entries.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
MovementEventList ::= SEQUENCE (SIZE(1..16)) OF MovementEvent
```
### MovementList
This DF consists of a list of [**MovementState**](#MovementState) entries.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
MovementList ::= SEQUENCE (SIZE(1..255)) OF MovementState
```
### MovementState
This DF is used to convey various information about the current or future movement state of
a designated collection of one or more lanes of a common type. This is referred to as the GroupID. Note that lane object
types supported include both motorized vehicle lanes as well as pedestrian lanes and dedicated rail and transit lanes. Of
the reported data elements, the time to change (the time remaining in the current state) is often of the most value. Lanes
with a common state (typically adjacent sets of lanes in an approach) in a signalized intersection will have individual lane
values such as total vehicle counts, summed. It is used in the SPAT message to convey every active movement in a
given intersection so that vehicles, when combined with certain map information, can determine the state of the signal
phases.
@field `movementName`: uniquely defines movement by name human readable name for intersection to be used only in debug mode
@field `signalGroup`: the group id is used to map to lists of lanes (and their descriptions)
which this MovementState data applies to see comments in the Note for usage details
@field `state-time-speed`: Consisting of sets of movement data with:
- a) SignalPhaseState
- b) TimeChangeDetails, and
- c) AdvisorySpeeds
Note one or more of the movement events may be for
a future time and that this allows conveying multiple
predictive phase and movement timing for various uses
for the current signal group
@field `maneuverAssistList`: This information may also be placed in the [**IntersectionState**](#IntersectionState)
when common information applies to different lanes in the same way
Values:
* _movementName_ of type [**DescriptiveName**](#DescriptiveName) OPTIONAL
* _signalGroup_ of type [**SignalGroupID**](ETSI-ITS-DSRC.md#SignalGroupID)
* _state-time-speed_ of type [**MovementEventList**](#MovementEventList)
* _maneuverAssistList_ of type [**ManeuverAssistList**](#ManeuverAssistList) OPTIONAL
* _regional_ of type **SEQUENCE** (SIZE(1..4)) OF
* **RegionalExtension** {{Reg-MovementState}} OPTIONAL
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
>>>
NOTE: ; Remarks: Note that the value given for the time to change will vary in many actuated signalized intersections based on
the sensor data received during the phase. The data transmitted always reflects the then most current timemark value
(which is the point in UTC time when the change will occur). As an example, in a phase which may vary from 15 to 25
seconds of duration based on observed traffic flows, a time to change value of 15 seconds in the future might be
transmitted for many consecutive seconds (and the time mark value extended for as much as 10 seconds depending on
the extension time logic used by the controller before it either times out or gaps out), followed by a final time mark value
reflecting the decreasing values as the time runs out, presuming the value was not again extended to a new time mark
due to other detection events. The time to change element can therefore generally be regarded as a guaranteed minimum
value of the time that will elapse unless a preemption event occurs.
In use, the [**SignalGroupID**](ETSI-ITS-DSRC.md#SignalGroupID) element is matched to lanes that are members of that ID. The type of lane (vehicle, crosswalk,
etc.) is known by the lane description as well as its allowed maneuvers and any vehicle class restrictions. Every lane type
is treated the same way (cross walks map to suitable meanings, etc.). Lane objects which are not part of the sequence of
signalized lanes do not appear in any GroupID. The visual details of how a given signal phase is presented to a mobile
user will vary based on lane type and with regional conventions. Not all signal states will be used in all regional
deployments. For example, a pre-green visual indication is not generally found in US deployments. Under such operating
conditions, the unused phase states are simply skipped.
>>>
```asn1
MovementState ::= SEQUENCE {
movementName DescriptiveName OPTIONAL,
signalGroup SignalGroupID,
state-time-speed MovementEventList,
maneuverAssistList ManeuverAssistList OPTIONAL,
regional SEQUENCE (SIZE(1..4)) OF
RegionalExtension {{Reg-MovementState}} OPTIONAL,
...
}
```
### NodeAttributeSetXY
All the node attributes defined in this DF are valid in the direction of
node declaration and not in driving direction (i.e. along the sequence of the declared nodes). E.g. node
attributes of an `ingress` or an `egress` lane are defined from the conflict area (first node) to the
outside of the intersection (last node). Node attributes with âleftâ and ârightâ in their name are also
defined in the direction of the node declaration. This allows using attributes in a unambigious way also
for lanes with biderctional driving. See the following attribuets examples for additianl explanations.
Values:
* _localNode_ of type [**NodeAttributeXYList**](#NodeAttributeXYList) OPTIONAL
* _disabled_ of type [**SegmentAttributeXYList**](#SegmentAttributeXYList) OPTIONAL
* _enabled_ of type [**SegmentAttributeXYList**](#SegmentAttributeXYList) OPTIONAL
* _data_ of type [**LaneDataAttributeList**](#LaneDataAttributeList) OPTIONAL
* _dWidth_ of type [**Offset-B10**](#Offset-B10) OPTIONAL
* _dElevation_ of type [**Offset-B10**](#Offset-B10) OPTIONAL
* _regional_ of type **SEQUENCE** (SIZE(1..4)) OF
* **RegionalExtension** {{Reg-NodeAttributeSetXY}} OPTIONAL
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
NodeAttributeSetXY ::= SEQUENCE {
localNode NodeAttributeXYList OPTIONAL,
disabled SegmentAttributeXYList OPTIONAL,
enabled SegmentAttributeXYList OPTIONAL,
data LaneDataAttributeList OPTIONAL,
dWidth Offset-B10 OPTIONAL,
dElevation Offset-B10 OPTIONAL,
regional SEQUENCE (SIZE(1..4)) OF
RegionalExtension {{Reg-NodeAttributeSetXY}} OPTIONAL,
...
}
```
### NodeAttributeXY
This DE is an enumerated list of attributes which can pertain to the current node
point. The 'scope' of these values is limited to the node itself. That is, unlike other types of attributes which can be
switched on or off at any given node (and hence pertains to one or more segments), the DE_NodeAttribute is local to the
node in which it is found. These attributes are all binary flags in that they do not need to convey any additional data. Other
attributes allow sending short data values to reflect a setting which is set and persists in a similar fashion.
- reserved:
- stopLine: point where a mid-path stop line exists. See also 'do not block' for segments
- roundedCapStyleA: Used to control final path rounded end shape with edge of curve at final point in a circle
- roundedCapStyleB: Used to control final path rounded end shape with edge of curve extending 50% of width past final point in a circle
- mergePoint: Japan merge with 1 or more lanes
- divergePoint: Japan diverge with 1 or more lanes
- downstreamStopLine: Japan style downstream intersection (a 2nd intersection) stop line
- downstreamStartNode: Japan style downstream intersection (a 2nd intersection) start node
- closedToTraffic: where a pedestrian may NOT go to be used during construction events
- safeIsland: a pedestrian safe stopping point also called a traffic island
This usage described a point feature on a path, other entries can describe a path
- curbPresentAtStepOff: the sidewalk to street curb is NOT angled where it meets the edge of the roadway (user must step up/down)
- hydrantPresent: Or other services access
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
NodeAttributeXY ::= ENUMERATED {
reserved,
stopLine,
roundedCapStyleA,
roundedCapStyleB,
mergePoint,
divergePoint,
downstreamStopLine,
downstreamStartNode,
closedToTraffic,
safeIsland,
curbPresentAtStepOff,
hydrantPresent,
...
}
```
### NodeAttributeXYList
The NodeAttributeXYList data frame consists of a list of [**NodeAttributeXY**](#NodeAttributeXY) entries.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
NodeAttributeXYList ::= SEQUENCE (SIZE(1..8)) OF NodeAttributeXY
```
### Node-LLmD-64b
A 64-bit node type with lat-long values expressed in one tenth of a micro degree.
* _lon_ of type [**Longitude**](ETSI-ITS-CDD.md#Longitude)
* _lat_ of type [**Latitude**](ETSI-ITS-CDD.md#Latitude)
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
Node-LLmD-64b ::= SEQUENCE {
lon Longitude,
lat Latitude
}
```
### Node-XY-20b
A 20-bit node type with offset values from the last point in X and Y.
* _x_ of type [**Offset-B10**](#Offset-B10)
* _y_ of type [**Offset-B10**](#Offset-B10)
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
Node-XY-20b ::= SEQUENCE {
x Offset-B10,
y Offset-B10
}
```
### Node-XY-22b
A 22-bit node type with offset values from the last point in X and Y.
* _x_ of type [**Offset-B11**](#Offset-B11)
* _y_ of type [**Offset-B11**](#Offset-B11)
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
Node-XY-22b ::= SEQUENCE {
x Offset-B11,
y Offset-B11
}
```
### Node-XY-24b
A 24-bit node type with offset values from the last point in X and Y.
* _x_ of type [**Offset-B12**](#Offset-B12)
* _y_ of type [**Offset-B12**](#Offset-B12)
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
Node-XY-24b ::= SEQUENCE {
x Offset-B12,
y Offset-B12
}
```
### Node-XY-26b
A 26-bit node type with offset values from the last point in X and Y.
* _x_ of type [**Offset-B13**](#Offset-B13)
* _y_ of type [**Offset-B13**](#Offset-B13)
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
Node-XY-26b ::= SEQUENCE {
x Offset-B13,
y Offset-B13
}
```
### Node-XY-28b
A 28-bit node type with offset values from the last point in X and Y.
* _x_ of type [**Offset-B14**](#Offset-B14)
* _y_ of type [**Offset-B14**](#Offset-B14)
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
Node-XY-28b ::= SEQUENCE {
x Offset-B14,
y Offset-B14
}
```
### Node-XY-32b
A 32-bit node type with offset values from the last point in X and Y.
* _x_ of type [**Offset-B16**](#Offset-B16)
* _y_ of type [**Offset-B16**](#Offset-B16)
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
Node-XY-32b ::= SEQUENCE {
x Offset-B16,
y Offset-B16
}
```
### NodeListXY
This DF provides the sequence of signed offset node point values for determining the Xs and Ys
(and possibly Width or Zs when present), using the then current Position3D object to build a path for the centerline of
the subject lane type. Each X,Y point is referred to as a Node Point. The straight line paths between these points are
referred to as Segments.
All nodes may have various optional attributes the state of which can vary along the path and which are enabled and
disabled by the sequence of objects found in the list of node structures. Refer to the explanatory text in Section 11 for a
description of how to correctly encode and decode this type of the data element. As a simple example, a motor vehicle
lane may have a section of the overall lane path marked "do not block", indicating that vehicles should not come to a stop
and remain in that region. This is encoded in the Node data structures by an element in one node to indicate the start of
the "do not block" lane attributes at a given offset, and then by a termination element when this attribute is set false. Other
types of elements in the segment choice allow inserting attributes containing data values affecting the segment or the
node.
* _nodes_ of type [**NodeSetXY**](ETSI-ITS-DSRC.md#NodeSetXY)
a lane made up of two or more XY node points and any attributes defined in those nodes
* _computed_ of type [**ComputedLane**](#ComputedLane)
a lane path computed by translating the data defined by another lane
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
NodeListXY ::= CHOICE {
nodes NodeSetXY,
computed ComputedLane,
...
}
```
### NodeOffsetPointXY
This DF presents a structure to hold different sized data frames for a single node
point in a lane. Nodes are described in terms of X and Y offsets in units of 1 centimeter (when zoom is 1:1). Changes in
elevation and in the lane width can be expressed in a similar way with the optional Attributes data entry which appears
alongside the NodeOffsetPoint in use.
The choice of which node type is driven by the magnitude (size) of the offset data to be encoded. When the distance from
the last node point is smaller, the smaller entries can (and should) be chosen
Each single selected node is computed as an X and Y offset from the prior node point unless one of the entries reflecting
a complete lat-long representation is selected. In this case, subsequent entries become offsets from that point. This ability
was added for assistance with the development, storage, and back office exchange of messages where message size is
not a concern and should not be sent over the air due to its additional message payload size.
The general usage guidance is to construct the content of each lane node point with the smallest possible element to
conserve message size. However, using an element which is larger than needed is not a violation of the ASN.1 rules.
* _node-XY1_ of type [**Node-XY-20b**](#Node-XY-20b)
node is within 5.11m of last node
* _node-XY2_ of type [**Node-XY-22b**](#Node-XY-22b)
node is within 10.23m of last node
* _node-XY3_ of type [**Node-XY-24b**](#Node-XY-24b)
node is within 20.47m of last node
* _node-XY4_ of type [**Node-XY-26b**](#Node-XY-26b)
node is within 40.96m of last node
* _node-XY5_ of type [**Node-XY-28b**](#Node-XY-28b)
node is within 81.91m of last node
* _node-XY6_ of type [**Node-XY-32b**](#Node-XY-32b)
node is within 327.67m of last node
* _node-LatLon_ of type [**Node-LLmD-64b**](#Node-LLmD-64b)
node is a full 32b Lat/Lon range
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
NodeOffsetPointXY ::= CHOICE {
node-XY1 Node-XY-20b,
node-XY2 Node-XY-22b,
node-XY3 Node-XY-24b,
node-XY4 Node-XY-26b,
node-XY5 Node-XY-28b,
node-XY6 Node-XY-32b,
node-LatLon Node-LLmD-64b,
regional RegionalExtension {{Reg-NodeOffsetPointXY}}
}
```
### NodeXY
This DF presents a structure to hold data for a single node point in a path. Each selected node
has an X and Y offset from the prior node point (or a complete lat-long representation in some cases) as well as optional
attribute information. The node list for a lane (or other object) is made up of a sequence of these to describe the desired
path. The X,Y points are selected to reflect the centerline of the path with sufficient accuracy for the intended applications.
Simple lanes can be adequately described with only two node points, while lanes with curvature may require more points.
Changes to the lane width and elevation can be expressed in the NodeAttributes entry, as well as various attributes that
pertain to either the current node point or to one of more subsequent segments along the list of lane node points. As a
broad concept, NodeAttributes are used to describe aspects of the lane that persist for only a portion of the overall lane
path (either at a node or over a set of segments).
A further description of the use of the NodeOffsetPoint and the Attributes data concepts can be found in the data
dictionary entries for each one. Note that each allows regional variants to be supported as well.
* _delta_ of type [**NodeOffsetPointXY**](ETSI-ITS-DSRC.md#NodeOffsetPointXY)
A choice of which X,Y offset value to use this includes various delta values as well a regional choices.
* _attributes_ of type [**NodeAttributeSetXY**](#NodeAttributeSetXY) OPTIONAL
Any optional Attributes which are needed. This includes changes to the current lane width and elevation.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
NodeXY ::= SEQUENCE {
delta NodeOffsetPointXY,
attributes NodeAttributeSetXY OPTIONAL,
...
}
```
### NodeSetXY
The NodeSetXY data frame consists of a list of Node entries using XY offsets.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
NodeSetXY ::= SEQUENCE (SIZE(2..63)) OF NodeXY
```
### OverlayLaneList
This DF is a sequence of lane IDs which refers to lane objects that overlap or overlay the current lane's spatial path.
Contains the unique ID numbers for any lane object which have spatial paths that overlay (run on top of, and not
simply cross with) the current lane.
Such as a train path that overlays a motor vehicle lane object for a roadway segment.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
OverlayLaneList ::= SEQUENCE (SIZE(1..5)) OF LaneID
```
### PositionalAccuracy
This DF consists of various parameters of quality used to model the accuracy of the
positional determination with respect to each given axis.
* _semiMajor_ of type [**SemiMajorAxisAccuracy**](#SemiMajorAxisAccuracy)
* _semiMinor_ of type [**SemiMinorAxisAccuracy**](#SemiMinorAxisAccuracy)
* _orientation_ of type [**SemiMajorAxisOrientation**](#SemiMajorAxisOrientation)
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
PositionalAccuracy ::= SEQUENCE {
semiMajor SemiMajorAxisAccuracy,
semiMinor SemiMinorAxisAccuracy,
orientation SemiMajorAxisOrientation
}
```
### PositionConfidenceSet
This DF combines multiple related bit fields into a single concept.
* _pos_ of type [**PositionConfidence**](#PositionConfidence)
confidence for both horizontal directions
* _elevation_ of type [**ElevationConfidence**](#ElevationConfidence)
confidence for vertical direction
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
PositionConfidenceSet ::= SEQUENCE {
pos PositionConfidence,
elevation ElevationConfidence
}
```
### Position3D
This DF provides a precise location in the WGS-84 coordinate system, from which short
offsets may be used to create additional data using a flat earth projection centered on this location. Position3D is typically
used in the description of maps and intersections, as well as signs and traveler data.
Values:
* _lat_ of type [**Latitude**](ETSI-ITS-CDD.md#Latitude)
* _long_ of type [**Longitude**](ETSI-ITS-CDD.md#Longitude)
* _elevation_ of type [**Elevation**](#Elevation) OPTIONAL
The elevation information is defined by the regional extension (see G.5.1.8). Therefore, the `elevation`
data element of `DF_Position3D` is not used.
* _regional_ of type **SEQUENCE** (SIZE(1..4)) OF
* **RegionalExtension** {{Reg-Position3D}} OPTIONAL
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
Position3D ::= SEQUENCE {
lat Latitude,
long Longitude,
elevation Elevation OPTIONAL,
regional SEQUENCE (SIZE(1..4)) OF
RegionalExtension {{Reg-Position3D}} OPTIONAL,
...
}
```
### PreemptPriorityList
This DF consists of a list of RegionalSignalControlZone entries.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
PreemptPriorityList ::= SEQUENCE (SIZE(1..32)) OF SignalControlZone
```
### RegulatorySpeedLimit
This DF is used to convey a regulatory speed about a lane, lanes, or roadway segment.
* _type_ of type [**SpeedLimitType**](#SpeedLimitType)
The type of regulatory speed which follows
* _speed_ of type [**Velocity**](#Velocity)
The speed in units of 0.02 m/s
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
RegulatorySpeedLimit ::= SEQUENCE {
type SpeedLimitType,
speed Velocity
}
```
### RequestorDescription
This DF is used to provide identity information about a selected vehicle or users.
This data frame is typically used with fleet type vehicles which can (or which must) safely release such information for use
with probe measurements or with other interactions (such as a signal request).
Values:
* _id_ of type [**VehicleID**](#VehicleID)
The ID used in the CAM of the requestor. This ID is presumed not to change during the exchange.
* _type_ of type [**RequestorType**](#RequestorType) OPTIONAL
Information regarding all type and class data about the requesting vehicle
* _position_ of type [**RequestorPositionVector**](#RequestorPositionVector) OPTIONAL
The location of the requesting vehicle
* _name_ of type [**DescriptiveName**](#DescriptiveName) OPTIONAL
A human readable name for debugging use
* _routeName_ of type [**DescriptiveName**](#DescriptiveName) OPTIONAL
A string for transit operations use
* _transitStatus_ of type [**TransitVehicleStatus**](#TransitVehicleStatus) OPTIONAL
current vehicle state (loading, etc.)
* _transitOccupancy_ of type [**TransitVehicleOccupancy**](#TransitVehicleOccupancy) OPTIONAL
current vehicle occupancy
* _transitSchedule_ of type [**DeltaTime**](ETSI-ITS-DSRC.md#DeltaTime) OPTIONAL
current vehicle schedule adherence
* _regional_ of type **SEQUENCE** (SIZE(1..4)) OF
* **RegionalExtension** {{Reg-RequestorDescription}} OPTIONAL
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
>>>
NOTE: Note that the requestor description elements which are used when the request (the req) is made differ from
those used when the status of an active or pending request is reported (the ack). Typically, when reporting the status to
other parties, less information is required and only the temporaryID (contained in the VehicleID) and request number (a
unique ID used in the orginal request) are used.
>>>
```asn1
RequestorDescription ::= SEQUENCE {
id VehicleID,
type RequestorType OPTIONAL,
position RequestorPositionVector OPTIONAL,
name DescriptiveName OPTIONAL,
routeName DescriptiveName OPTIONAL,
transitStatus TransitVehicleStatus OPTIONAL,
transitOccupancy TransitVehicleOccupancy OPTIONAL,
transitSchedule DeltaTime OPTIONAL,
regional SEQUENCE (SIZE(1..4)) OF
RegionalExtension {{Reg-RequestorDescription}} OPTIONAL,
...
}
```
### RequestorPositionVector
This DF provides a report of the requestor's position, speed, and heading.
Used by a vehicle or other type of user to request services and at other times when the larger FullPositionVector is not required.
* _position_ of type [**Position3D**](#Position3D)
* _heading_ of type [**Angle**](#Angle) OPTIONAL
* _speed_ of type [**TransmissionAndSpeed**](#TransmissionAndSpeed) OPTIONAL
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
RequestorPositionVector ::= SEQUENCE {
position Position3D,
heading Angle OPTIONAL,
speed TransmissionAndSpeed OPTIONAL,
...
}
```
### RequestorType
This DF is used when a DSRC-equipped device is requesting service from another
device. The most common use case is when a vehicle is requesting a signal preemption or priority service call from the
signal controller in an intersection. This data frame provides the details of the requestor class taxonomy required to
support the request. Depending on the precise use case and the local implementation, these details can vary
considerably. As a result, besides the basic role of the vehicle, the other classification systems supported are optional. It
should also be observed that often only a subset of the information in the RequestorType data frame is used to report the
"results" of such a request to others. As an example, a police vehicle might request service based on being in a police
vehicle role (and any further sub-type if required) and on the type of service call to which the vehicle is then responding
(perhaps a greater degree of emergency than another type of call), placing these information elements in the
RequestorType, which is then part of the Signal Request Message (SRM). This allows the roadway operator to define
suitable business rules regarding how to reply. When informing the requestor and other nearby drivers of the outcome,
using the Signal Status Message (SSM) message, only the fact that the preemption was granted or denied to some
vehicle with a unique request ID is conveyed.
* _role_ of type [**BasicVehicleRole**](#BasicVehicleRole)
Basic role of this user at this time.
* _subrole_ of type [**RequestSubRole**](#RequestSubRole) OPTIONAL
A local list with role based items.
* _request_ of type [**RequestImportanceLevel**](#RequestImportanceLevel) OPTIONAL
A local list with request items
* _iso3883_ of type [**Iso3833VehicleType**](ElectronicRegistrationIdentificationVehicleDataModule.md#Iso3833VehicleType) OPTIONAL
Additional classification details
* _hpmsType_ of type [**VehicleType**](#VehicleType) OPTIONAL
HPMS classification types
* _regional_ of type [**RegionalExtension**](#RegionalExtension) {{Reg-RequestorType}} OPTIONAL
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
RequestorType ::= SEQUENCE {
role BasicVehicleRole,
subrole RequestSubRole OPTIONAL,
request RequestImportanceLevel OPTIONAL,
iso3883 Iso3833VehicleType OPTIONAL,
hpmsType VehicleType OPTIONAL,
regional RegionalExtension {{Reg-RequestorType}} OPTIONAL,
...
}
```
### RestrictionClassAssignment
This DF is used to assign (or bind) a single RestrictionClassID data
element to a list of all user classes to which it applies. A collection of these bindings is conveyed in the
RestrictionClassList data frame in the MAP message to travelers. The established index is then used in the lane object of
the MAP message, in the ConnectTo data frame, to qualify to whom a signal group ID applies when it is sent by the SPAT
message about a movement.
* _id_ of type [**RestrictionClassID**](#RestrictionClassID)
the unique value (within an intersection or local region) that is assigned to this group of users.
* _users_ of type [**RestrictionUserTypeList**](#RestrictionUserTypeList)
The list of user types/classes to which this restriction ID applies.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
RestrictionClassAssignment ::= SEQUENCE {
id RestrictionClassID,
users RestrictionUserTypeList
}
```
### RestrictionClassList
This DF is used to enumerate a list of user classes which belong to a given
assigned index. The resulting collection is treated as a group by the signal controller when it issues movement data
(signal phase information) with the GroupID for this group. This data frame is typically static for long periods of time
(months) and conveyed to the user by means of the MAP message.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
>>>
NOTE: The overall restriction class assignment process allows dynamic support within the framework of the common
message set for the various special cases that some signalized intersections must support. While the assigned value
needs to be unique only within the scope of the intersection that uses it, the resulting assignment lists will tend to be static
and stable for regional deployment areas such as a metropolitan area based on their operational practices and needs.
>>>
```asn1
RestrictionClassList ::= SEQUENCE (SIZE(1..254)) OF RestrictionClassAssignment
```
### RestrictionUserType
This DF is used to provide a means to select one, and only one, user type or class
from a number of well-known lists. The selected entry is then used in the overall Restriction Class assignment process to
indicate that a given GroupID (a way of expressing a movement in the SPAT/MAP system) applies to (is restricted to) this
class of user.
Values:
* _basicType_ of type [**RestrictionAppliesTo**](#RestrictionAppliesTo)
a set of the most commonly used types.
* _regional_ of type **SEQUENCE** (SIZE(1..4)) OF
* **RegionalExtension** {{Reg-RestrictionUserType}}
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
RestrictionUserType ::= CHOICE {
basicType RestrictionAppliesTo,
regional SEQUENCE (SIZE(1..4)) OF
RegionalExtension {{Reg-RestrictionUserType}},
...
}
```
### RestrictionUserTypeList
This DF consists of a list of [**RestrictionUserType**](#RestrictionUserType) entries.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
RestrictionUserTypeList ::= SEQUENCE (SIZE(1..16)) OF RestrictionUserType
```
### RoadLaneSetList
This DF consists of a list of GenericLane entries used to describe a segment of roadway.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
RoadLaneSetList ::= SEQUENCE (SIZE(1..255)) OF GenericLane
```
### RoadSegmentReferenceID
This DF is used to convey theRoadSegmentID which is unique to a given road segment of interest,
and also the RoadRegulatorID assigned to the region in which it is operating (when required).
* _region_ of type [**RoadRegulatorID**](#RoadRegulatorID) OPTIONAL
a globally unique regional assignment value typically assigned to a regional DOT authority the value zero shall be used for testing needs.
* _id_ of type [**RoadSegmentID**](#RoadSegmentID)
a unique mapping to the road segment in question within the above region of use during its period of assignment and use
note that unlike intersectionID values, this value can be reused by the region.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
RoadSegmentReferenceID ::= SEQUENCE {
region RoadRegulatorID OPTIONAL,
id RoadSegmentID
}
```
### RoadSegment
This DF is a complete description of a RoadSegment including its geometry and its
allowed navigational paths (independent of any additional regulatory restrictions that may apply over time or from user
classification) and any current disruptions such as a work zone or incident event.
Values:
* _name_ of type [**DescriptiveName**](#DescriptiveName) OPTIONAL
some descriptive text.
* _id_ of type [**RoadSegmentReferenceID**](#RoadSegmentReferenceID)
a globally unique value for the segment.
* _revision_ of type [**MsgCount**](#MsgCount)
.
* _refPoint_ of type [**Position3D**](#Position3D)
the reference from which subsequent data points are offset until a new point is used.
* _laneWidth_ of type [**LaneWidth**](#LaneWidth) OPTIONAL
Reference width used by all subsequent lanes unless a new width is given.
* _speedLimits_ of type [**SpeedLimitList**](#SpeedLimitList) OPTIONAL
Reference regulatory speed limits used by all subsequent lanes unless a new speed is given.
* _roadLaneSet_ of type [**RoadLaneSetList**](#RoadLaneSetList)
Data describing disruptions in the RoadSegment such as work zones etc will be added here.
* _regional_ of type **SEQUENCE** (SIZE(1..4)) OF
* **RegionalExtension** {{Reg-RoadSegment}} OPTIONAL
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
RoadSegment ::= SEQUENCE {
name DescriptiveName OPTIONAL,
id RoadSegmentReferenceID,
revision MsgCount,
refPoint Position3D,
laneWidth LaneWidth OPTIONAL,
speedLimits SpeedLimitList OPTIONAL,
roadLaneSet RoadLaneSetList,
regional SEQUENCE (SIZE(1..4)) OF
RegionalExtension {{Reg-RoadSegment}} OPTIONAL,
...
}
```
### RoadSegmentList
This DF consists of a list of [**RoadSegment**](#RoadSegment) entries.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
RoadSegmentList ::= SEQUENCE (SIZE(1..32)) OF RoadSegment
```
### RTCMheader
This DF is a collection of data values used to convey RTCM information between users. It
is not required or used when sending RTCM data from a corrections source to end users (from a base station to devices
deployed in the field which are called rovers).
* _status_ of type [**GNSSstatus**](#GNSSstatus)
* _offsetSet_ of type [**AntennaOffsetSet**](#AntennaOffsetSet)
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
RTCMheader ::= SEQUENCE {
status GNSSstatus,
offsetSet AntennaOffsetSet
}
```
### RTCMmessageList
This DF consists of a list of [**RTCMmessage**](#RTCMmessage) entries.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
RTCMmessageList ::= SEQUENCE (SIZE(1..5)) OF RTCMmessage
```
### SegmentAttributeXYList
This DF consists of a list of [**SegmentAttributeXY**](#SegmentAttributeXY) entries.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
SegmentAttributeXYList ::= SEQUENCE (SIZE(1..8)) OF SegmentAttributeXY
```
### SignalControlZone
This DF is a dummy placeholder to contain a regional SignalControlZone DF.
It is not used, yet here for backwards compatibility.
* _zone_ of type [**RegionalExtension**](#RegionalExtension) {{Reg-SignalControlZone}}
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
SignalControlZone ::= SEQUENCE {
zone RegionalExtension {{Reg-SignalControlZone}},
...
}
```
### SignalRequesterInfo
This DF is used to contain information regarding the entity that requested a given
signal behavior. In addition to the VehicleID, the data frame also contains a request reference number used to uniquely
refer to the request and some basic type information about the request maker which may be used by other parties.
* _id_ of type [**VehicleID**](#VehicleID)
to uniquely identify the requester and the specific request to all parties.
* _request_ of type [**RequestID**](#RequestID)
to uniquely identify the requester and the specific request to all parties.
* _sequenceNumber_ of type [**MsgCount**](#MsgCount)
to uniquely identify the requester and the specific request to all parties.
* _role_ of type [**BasicVehicleRole**](#BasicVehicleRole) OPTIONAL
vehicle role
* _typeData_ of type [**RequestorType**](#RequestorType) OPTIONAL
Used when addition data besides the role is needed, at which point the role entry above is not sent.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
SignalRequesterInfo ::= SEQUENCE {
id VehicleID,
request RequestID,
sequenceNumber MsgCount,
role BasicVehicleRole OPTIONAL,
typeData RequestorType OPTIONAL,
...
}
```
### SignalRequest
This DF is used (as part of a request message) to request either a priority or a preemption service
from a signalized intersection. It relates the intersection ID as well as the specific request information. Additional
information includes the approach and egress values or lanes to be used.
Values:
* _id_ of type [**IntersectionReferenceID**](#IntersectionReferenceID)
the unique ID of the target intersection
* _requestID_ of type [**RequestID**](#RequestID)
The unique requestID used by the requestor
* _requestType_ of type [**PriorityRequestType**](#PriorityRequestType)
The type of request or cancel for priority or preempt use when a prior request is canceled, only the requestID is needed.
* _inBoundLane_ of type [**IntersectionAccessPoint**](#IntersectionAccessPoint)
desired entry approach or lane.
* _outBoundLane_ of type [**IntersectionAccessPoint**](#IntersectionAccessPoint) OPTIONAL
desired exit approach or lane. the value zero is used to indicate intent to stop within the intersection.
* _regional_ of type **SEQUENCE** (SIZE(1..4)) OF
* **RegionalExtension** {{Reg-SignalRequest}} OPTIONAL
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
>>>
NOTE: In typical use either an approach or a lane number would be given, this indicates the requested
path through the intersection to the degree it is known.
>>>
```asn1
SignalRequest ::= SEQUENCE {
id IntersectionReferenceID,
requestID RequestID,
requestType PriorityRequestType,
inBoundLane IntersectionAccessPoint,
outBoundLane IntersectionAccessPoint OPTIONAL,
regional SEQUENCE (SIZE(1..4)) OF
RegionalExtension {{Reg-SignalRequest}} OPTIONAL,
...
}
```
### SignalRequestList
This DF consists of a list of [**SignalRequest**](#SignalRequest) entries.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
SignalRequestList ::= SEQUENCE (SIZE(1..32)) OF SignalRequestPackage
```
### SignalRequestPackage
This DF contains both the service request itself (the preemption and priority
details and the inbound-outbound path details for an intersection) and the time period (start and end time) over which this
service is sought from one single intersection. One or more of these packages are contained in a list in the Signal
Request Message (SREM).
Values:
* _request_ of type [**SignalRequest**](#SignalRequest)
The specific request to the intersection contains IntersectionID, request type, requested action (approach/lane request).
* _minute_ of type [**MinuteOfTheYear**](#MinuteOfTheYear) OPTIONAL
Time period start.
* _second_ of type [**DSecond**](#DSecond) OPTIONAL
Time period start.
* _duration_ of type [**DSecond**](#DSecond) OPTIONAL
The duration value is used to provide a short interval that extends the ETA so that the requesting vehicle can arrive at
the point of service with uncertainty or with some desired duration of service. This concept can be used to avoid needing
to frequently update the request. The requester must update the ETA and duration values if the
period of services extends beyond the duration time. It should be assumed that if the vehicle does not clear the
intersection when the duration is reached, the request will be cancelled and the intersection will revert to normal operation.
* _regional_ of type **SEQUENCE** (SIZE(1..4)) OF
* **RegionalExtension** {{Reg-SignalRequestPackage}} OPTIONAL
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
SignalRequestPackage ::= SEQUENCE {
request SignalRequest,
minute MinuteOfTheYear OPTIONAL,
second DSecond OPTIONAL,
duration DSecond OPTIONAL,
regional SEQUENCE (SIZE(1..4)) OF
RegionalExtension {{Reg-SignalRequestPackage}} OPTIONAL,
...
}
```
### SignalStatus
This DF is used to provide the status of a single intersection to others, including any active
preemption or priority state in effect.
Values:
* _sequenceNumber_ of type [**MsgCount**](#MsgCount)
changed whenever the below contents have change
* _id_ of type [**IntersectionReferenceID**](#IntersectionReferenceID)
this provides a unique mapping to the intersection map in question which provides complete location
and approach/movement/lane data as well as zones for priority/preemption.
* _sigStatus_ of type [**SignalStatusPackageList**](#SignalStatusPackageList)
a list of detailed status containing all priority or preemption state data, both active and pending,
and who requested it requests which are denied are also listed here for a short period of time.
* _regional_ of type **SEQUENCE** (SIZE(1..4)) OF
* **RegionalExtension** {{Reg-SignalStatus}} OPTIONAL
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
SignalStatus ::= SEQUENCE {
sequenceNumber MsgCount,
id IntersectionReferenceID,
sigStatus SignalStatusPackageList,
regional SEQUENCE (SIZE(1..4)) OF
RegionalExtension {{Reg-SignalStatus}} OPTIONAL,
...
}
```
### SignalStatusList
This DF consists of a list of [**SignalStatus**](#SignalStatus) entries.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
SignalStatusList ::= SEQUENCE (SIZE(1..32)) OF SignalStatus
```
### SignalStatusPackageList
This DF consists of a list of [**SignalStatusPackage**](#SignalStatusPackage) entries.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
SignalStatusPackageList ::= SEQUENCE (SIZE(1..32)) OF SignalStatusPackage
```
### SignalStatusPackage
The DF_SignalStatusPackage data frame contains all the data needed to describe the preemption or priority state
of the signal controller with respect to a given request and to uniquely identify the party who requested that state to occur.
It should be noted that this data frame describes both active and anticipated states of the controller. A requested service
may not be active when the message is created and issued. A requested service may be rejected. This structure allows
the description of pending requests that have been granted (accepted rather than rejected) but are not yet active and
being serviced. It also provides for the description of rejected requests so that the initial message is acknowledged
(completing a dialog using the broadcast messages).
* requester
The party that made the initial SREM request.
* inboundOn
estimated lane / approach of vehicle.
* outboundOn
estimated lane / approach of vehicle.
* minute
The Estimated Time of Arrival (ETA) when the service is requested. This data echos the data of the request.
* second
seconds part of ETA.
* duration
duration part of ETA.
* status
Status of request, this may include rejection.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
SignalStatusPackage ::= SEQUENCE {
requester SignalRequesterInfo OPTIONAL,
inboundOn IntersectionAccessPoint,
outboundOn IntersectionAccessPoint OPTIONAL,
```
### SpeedandHeadingandThrottleConfidence
This DF is a single data frame combining multiple related bit fields into one concept.
* _heading_ of type [**HeadingConfidenceDSRC**](#HeadingConfidenceDSRC)
* _speed_ of type [**SpeedConfidenceDSRC**](#SpeedConfidenceDSRC)
* _throttle_ of type [**ThrottleConfidence**](#ThrottleConfidence)
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
SpeedandHeadingandThrottleConfidence ::= SEQUENCE {
heading HeadingConfidenceDSRC,
speed SpeedConfidenceDSRC,
throttle ThrottleConfidence
}
```
### SpeedLimitList
This DF consists of a list of SpeedLimit entries.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
SpeedLimitList ::= SEQUENCE (SIZE(1..9)) OF RegulatorySpeedLimit
```
### SpeedLimitType
This DE relates the type of speed limit to which a given speed refers.
- unknown: Speed limit type not available
- maxSpeedInSchoolZone: Only sent when the limit is active
- maxSpeedInSchoolZoneWhenChildrenArePresent: Sent at any time
- maxSpeedInConstructionZone: Used for work zones, incident zones, etc. where a reduced speed is present
- vehicleMinSpeed: Regulatory speed limit for general traffic
- vehicleMaxSpeed: Regulatory speed limit for general traffic
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
SpeedLimitType ::= ENUMERATED {
unknown,
maxSpeedInSchoolZone,
maxSpeedInSchoolZoneWhenChildrenArePresent,
maxSpeedInConstructionZone,
vehicleMinSpeed,
vehicleMaxSpeed,
vehicleNightMaxSpeed,
truckMinSpeed,
truckMaxSpeed,
truckNightMaxSpeed,
vehiclesWithTrailersMinSpeed,
vehiclesWithTrailersMaxSpeed,
vehiclesWithTrailersNightMaxSpeed,
...
}
```
### TimeChangeDetails
This DF conveys details about the timing of a phase within a movement. The core
data concept expressed is the time stamp (time mark) at which the related phase will change to the next state. This is
often found in the MinEndTime element, but the other elements may be needed to convey the full concept when adaptive
timing is employed.
* _startTime_ of type [**TimeMark**](#TimeMark) OPTIONAL
is used to relate when the phase itself started or is expected to start. This in turn allows the
indication that a set of time change details refers to a future phase, rather than a currently active phase.
By this method, timing information about "pre" phase events (which are the short transitional phase used to alert OBEs to
an impending green/go or yellow/caution phase) and the longer yellow-caution phase data is supported in the same form
as various green/go phases. In theory, the time change details could be sent for a large sequence of phases if the signal
timing was not adaptive and the operator wished to do so. In practice, it is expected only the "next" future phase will
commonly be sent. It should be noted that this also supports the sending of time periods regarding various red phases;
however, this is not expected to be done commonly.
* _minEndTime_ of type [**TimeMark**](#TimeMark)
is used to convey the earliest time possible at which the phase could change, except when
unpredictable events relating to a preemption or priority call disrupt a currently active timing plan. In a phase where the
time is fixed (as in a fixed yellow or clearance time), this element shall be used alone. This value can be viewed as the
earliest possible time at which the phase could change, except when unpredictable events relating to a preemption or
priority call come into play and disrupt a currently active timing plan.
* _maxEndTime_ of type [**TimeMark**](#TimeMark) OPTIONAL
is used to convey the latest time possible which the phase could change,
except when unpredictable events relating to a preemption or priority
call come into play and disrupt a currently active timing plan. In a phase where the time is fixed (as in a fixed yellow or
clearance time), this element shall be used alone.
* _likelyTime_ of type [**TimeMark**](#TimeMark) OPTIONAL
is used to convey the most likely time the phase changes. This occurs between MinEndTime and
MaxEndTime and is only relevant for traffic-actuated control programs. This time might be calculated out of logged
historical values, detected events (e.g., from inductive loops), or from other sources.
* _confidence_ of type [**TimeIntervalConfidence**](#TimeIntervalConfidence) OPTIONAL
is used to convey basic confidence data about the likelyTime.
* _nextTime_ of type [**TimeMark**](#TimeMark) OPTIONAL
is used to express a general (and presumably less precise) value regarding when this phase will
next occur. This is intended to be used to alert the OBE when the next green/go may occur so that various ECO driving
applications can better manage the vehicle during the intervening stopped time.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
>>>
NOTE: Remarks: It should be noted that all times are expressed as absolute values and not as countdown timer values. When
the stated time mark is reached, the state changes to the next state. Several technical reasons led to this choice; among
these was that with a countdown embodiment, there is an inherent need to update the remaining time every time a SPAT
message is issued. This would require re-formulating the message content as as well as cryptographically signing the
message each time. With the use of absolute values (time marks) chosen here, the current count down time when the
message is created is added to the then-current time to create an absolute value and can be used thereafter without
change. The message content need only change when the signal controller makes a timing decision to be published. This
allows a clean separation of the logical functions of message creation from the logical functions of message scheduling
and sending, and fulfills the need to minimize further real time processing when possible. This Standard sets no limits on
where each of these functions is performed in the overall roadside system.
>>>
```asn1
TimeChangeDetails ::= SEQUENCE {
startTime TimeMark OPTIONAL,
minEndTime TimeMark,
maxEndTime TimeMark OPTIONAL,
likelyTime TimeMark OPTIONAL,
confidence TimeIntervalConfidence OPTIONAL,
nextTime TimeMark OPTIONAL
}
```
### TimeMark
This DE is used to relate a moment in UTC (Coordinated Universal Time)-based time when a
signal phase is predicted to change, with a precision of 1/10 of a second. A range of 60 full minutes is supported and it
can be presumed that the receiver shares a common sense of time with the sender which is kept aligned to within a
fraction of a second or better.
If there is a need to send a value greater than the range allowed by the data element (over one hour in the future), the
value 36000 shall be sent and shall be interpreted to indicate an indefinite future time value. When the value to be used is
undefined or unknown a value of 36001 shall be sent. Note that leap seconds are also supported.
The value is tenths of a second in the current or next hour in units of 1/10th second from UTC time
- A range of 0~36000 covers one hour
- The values 35991..35999 are used when a leap second occurs
- The value 36000 is used to indicate time >3600 seconds
- 36001 is to be used when value undefined or unknown
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
>>>
NOTE: Note that this is NOT expressed in GPS time or in local time
>>>
```asn1
TimeMark ::= INTEGER (0..36001)
```
### TransmissionAndSpeed
This DF expresses the speed of the vehicle and the state of the transmission.
The transmission state of 'reverse' can be used as a sign value for the speed element when needed.
* _transmisson_ of type [**TransmissionState**](#TransmissionState)
* _speed_ of type [**Velocity**](#Velocity)
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
TransmissionAndSpeed ::= SEQUENCE {
transmisson TransmissionState,
speed Velocity
}
```
### VehicleID
This DF is used to contain either a (US) TemporaryID or an (EU) StationID in a simple frame.
These two different value domains are used to uniquely identify a vehicle or other object in these two regional DSRC
value is unavailable but needed by another type of user (such as the roadside infrastructure sending data about an
environments. In normal use cases, this value changes over time to prevent tracking of the subject vehicle. When this
unequipped vehicle), the value zero shall be used. A typical restriction on the use of this value during a dialog or other
exchange is that the value remains constant for the duration of that exchange. Refer to the performance requirements for
a given application for details.
* _entityID_ of type [**TemporaryID**](#TemporaryID)
* _stationID_ of type [**StationID**](ETSI-ITS-CDD.md#StationID)
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
VehicleID ::= CHOICE {
entityID TemporaryID,
stationID StationID
}
```
### AdvisorySpeedType
This DE relates the type of travel to which a given speed refers. This element is
typically used as part of an AdvisorySpeed data frame for signal phase and timing data.
Values:
* **none** (0)
* **greenwave** (1)
* **ecoDrive** (2)
* **transit** (3)
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
AdvisorySpeedType ::= ENUMERATED {
none (0),
greenwave (1),
ecoDrive (2),
transit (3),
...
}
```
### AllowedManeuvers
This DE relates the allowed (possible) maneuvers from a lane, typically a
motorized vehicle lane. It should be noted that in practice these values may be further restricted by vehicle class, local
regulatory environment and other changing conditions.
Values:
* **maneuverStraightAllowed** (0)
* **maneuverLeftAllowed** (1)
* **maneuverRightAllowed** (2)
* **maneuverUTurnAllowed** (3)
* **maneuverLeftTurnOnRedAllowed** (4)
* **maneuverRightTurnOnRedAllowed** (5)
* **maneuverLaneChangeAllowed** (6)
* **maneuverNoStoppingAllowed** (7)
* **yieldAllwaysRequired** (8)
* **goWithHalt** (9)
* **caution** (10)
* **reserved1** (11)
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
>>>
NOTE: When used by data frames, the AllowedManeuvers data concept is used in two places: optionally in the
generic lane structure to list all possible maneuvers (as in what that lane can do at its stop line point); and within each
ConnectsTo structure. Each ConnectsTo structure contains a list used to provide a single valid maneuver in the context of
one lane connecting to another in the context of a signal phase that applies to that maneuver. It should be noted that, in
some intersections, multiple outbound lanes can be reached by the same maneuver (for example two independent left
turns might be found in a 5-legged intersection) but that to reach any given lane from the stop line of another lane is
always a single maneuver item (hence the use of a list). Not all intersection descriptions may contain an exhaustive set of
ConnectsTo information (unsignalized intersections for example) and in such cases the AllowedManeuvers in the generic
lane structure can be used. If present in both places, the data expressed in the generic lane shall not conflict with the data
found in the collection of ConnectsTo entries.
>>>
```asn1
AllowedManeuvers ::= BIT STRING {
maneuverStraightAllowed (0),
maneuverLeftAllowed (1),
maneuverRightAllowed (2),
maneuverUTurnAllowed (3),
maneuverLeftTurnOnRedAllowed (4),
maneuverRightTurnOnRedAllowed (5),
maneuverLaneChangeAllowed (6),
maneuverNoStoppingAllowed (7),
yieldAllwaysRequired (8),
goWithHalt (9),
caution (10),
reserved1 (11)
} (SIZE(12))
```
### Angle
This DE is used to describe an angular measurement in units of degrees. This data
element is often used as a heading direction when in motion. In this use, the current heading of the sending device is
expressed in unsigned units of 0.0125 degrees from North, such that 28799 such degrees represent 359.9875 degrees.
North shall be defined as the axis defined by the WGS-84 coordinate system and its reference ellipsoid. Any angle "to the
east" is defined as the positive direction. A value of 28800 shall be used when Angle is unavailable.
**Unit:** _0.0125 degrees_
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
>>>
NOTE: Note that other heading and angle data elements of various sizes and precisions are found in other parts of this standard and in ITS.
>>>
```asn1
Angle ::= INTEGER (0..28800)
```
### ApproachID
This DE is used to relate the index of an approach, either ingress or egress within the
subject lane. In general, an approach index in the context of a timing movement is not of value in the MAP and SPAT
process because the lane ID and signal group ID concepts handle this with more precision. This value can also be useful
as an aid as it can be used to indicate the gross position of a moving object (vehicle) when its lane level accuracy is
unknown. This value can also be used when a deployment represents sets of lanes as groups without further details (as is
done in Japan).
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
>>>
NOTE: zero to be used when valid value is unknown
>>>
```asn1
ApproachID ::= INTEGER (0..15)
```
### BasicVehicleRole
This DE provides a means to indicate the current role that a DSRC device is playing
This is most commonly employed when a vehicle needs to take on another role in order to send certain DSRC message
types. As an example, when a public safety vehicle such as a police car wishes to send a signal request message (SRM)
to an intersection to request a preemption service, the vehicle takes on the role "police" from the below list in both the
SRM message itself and also in the type of security CERT which is sent (the SSP in the CERT it used to identify the
requester as being of type "police" and that they are allowed to send this message in this way). The BasicVehicleRole
entry is often used and combined with other information about the requester as well, such as details of why the request is
being made.
- 0 - `basicVehicle` - Light duty passenger vehicle type
- 1 - `publicTransport` - Used in EU for Transit us
- 2 - `specialTransport` - Used in EU (e.g. heavy load)
- 3 - `dangerousGoods` - Used in EU for any HAZMAT
- 4 - `roadWork` - Used in EU for State and Local DOT uses
- 5 - `roadRescue` - Used in EU and in the US to include tow trucks.
- 6 - `emergency` - Used in EU for Police, Fire and Ambulance units
- 7 - `safetyCar` - Used in EU for Escort vehicles
- 8 - `none-unknown` - added to follow current SAE style guidelines
- 9 - `truck` - Heavy trucks with additional BSM rights and obligations
- 10 - `motorcycle` - Motorcycle
- 11 - `roadSideSource` - For infrastructure generated calls such as fire house, rail infrastructure, roadwork site, etc.
- 12 - `police` - Police vehicle
- 13 - `fire` - Firebrigade
- 14 - `ambulance` - (does not include private para-transit etc.)
- 15 - `dot` - all roadwork vehicles
- 16 - `transit` - all transit vehicles
- 17 - `slowMoving` - to also include oversize etc.
- 18 - `stopNgo` - to include trash trucks, school buses and others
- 19 - `cyclist` - bicycles
- 20 - `pedestrian` - also includes those with mobility limitations
- 21 - `nonMotorized` - other, horse drawn, etc.
- 22 - `military` - military vehicles
Values:
* **basicVehicle** (0)
* **publicTransport** (1)
* **specialTransport** (2)
* **dangerousGoods** (3)
* **roadWork** (4)
* **roadRescue** (5)
* **emergency** (6)
* **safetyCar** (7)
* **none-unknown** (8)
* **truck** (9)
* **motorcycle** (10)
* **roadSideSource** (11)
* **police** (12)
* **fire** (13)
* **ambulance** (14)
* **dot** (15)
* **transit** (16)
* **slowMoving** (17)
* **stopNgo** (18)
* **cyclist** (19)
* **pedestrian** (20)
* **nonMotorized** (21)
* **military** (22)
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
>>>
NOTE: It should be observed that DSRC devices can at times change their roles (i.e. a fire operated by a volunteer
fireman can assume a fire role for a period of time when in service, or a pedestrian may assume a cyclist role when using
a bicycle). It should be observed that not all DSRC devices (or DSRC vehicles) can assume all roles, nor that a given
device in a given role will be provided with a security certificate (CERT) that has suitable SSP credentials to provide the
ability to send a particular message or message content. The ultimate responsibility to determine what role is to be used,
and what CERTs would be provided for that role (which in turn controls the messages and message content that can be
sent within SAE-defined PSIDs) rests with the regional deployment.
>>>
```asn1
BasicVehicleRole ::= ENUMERATED {
basicVehicle (0),
publicTransport (1),
specialTransport (2),
dangerousGoods (3),
roadWork (4),
roadRescue (5),
emergency (6),
safetyCar (7),
none-unknown (8),
truck (9),
motorcycle (10),
roadSideSource (11),
police (12),
fire (13),
ambulance (14),
dot (15),
transit (16),
slowMoving (17),
stopNgo (18),
cyclist (19),
pedestrian (20),
nonMotorized (21),
military (22),
...
}
```
### DDay
The DSRC style day is a simple value consisting of integer values from zero to 31. The value of zero shall represent an unknown value.
**Unit:** _days_
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
DDay ::= INTEGER (0..31)
```
### DeltaAngle
This DE provides the final angle used in the last point of the lane path. Used to "cant" the stop line of the lane.
With an angle range from negative 150 to positive 150 in one degree steps where zero is directly
along the axis or the lane center line as defined by the two closest points.
**Unit:** _degree_
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
DeltaAngle ::= INTEGER (-150..150)
```
### DeltaTime
This DE provides a time definition for an object's schedule adherence (typically a transit
vehicle) within a limited range of time. When the reporting object is ahead of schedule, a positive value is used; when
behind, a negative value is used. A value of zero indicates schedule adherence. This value is typically sent from a vehicle
to the traffic signal controller's RSU to indicate the urgency of a signal request in the context of being within schedule or
not. In another use case, the traffic signal controller may advise the transit vehicle to speed up (DeltaTime > 0) or to slow
down (DeltaTime < 0) to optimize the transit vehicle distribution driving along a specific route (e.g. a Bus route).
Supporting a range of +/- 20 minute in steps of 10 seconds:
- the value of -121 shall be used when more than -20 minutes
- the value of +120 shall be used when more than +20 minutes
- the value -122 shall be used when the value is unavailable
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
DeltaTime ::= INTEGER (-122 .. 121)
```
### DescriptiveName
This DE is used in maps and intersections to provide a human readable and
recognizable name for the feature that follows. It is typically used when debugging a data flow and not in production use.
One key exception to this general rule is to provide a human-readable string for disabled travelers in the case of
crosswalks and sidewalk lane objects.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
DescriptiveName ::= IA5String (SIZE(1..63))
```
### DHour
The DSRC hour consists of integer values from zero to 23 representing the hours within a day. The value of 31 shall
represent an unknown value. The range 24 to 30 is used in some transit applications to represent schedule adherence.
**Unit:** _hours_
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
DHour ::= INTEGER (0..31)
```
### DMinute
The DSRC style minute is a simple value consisting of integer values from zero to 59 representing the minutes
within an hour. The value of 60 shall represent an unknown value.
**Unit:** _minutes_
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
DMinute ::= INTEGER (0..60)
```
### DMonth
The DSRC month consists of integer values from one to 12, representing the month within a year. The value of 0
shall represent an unknown value.
**Unit:** _months_
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
DMonth ::= INTEGER (0..12)
```
### DOffset
The DSRC (time zone) offset consists of a signed integer representing an hour and minute value set from -14:00 to
+14:00, representing all the worldâs local time zones in units of minutes. The value of zero (00:00) may also represent an
unknown value. Note some time zones are do not align to hourly boundaries.
**Unit:** _minutes from UTC time_
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
DOffset ::= INTEGER (-840..840)
```
### DrivenLineOffsetLg
This DE is an integer value expressing the offset in a defined axis from a
reference lane number from which a computed lane is offset. The measurement is taken from the reference lane center
line to the new center line, independent of any width values. The units are a signed value with an LSB of 1 cm.
**Unit:** _cm_
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
DrivenLineOffsetLg ::= INTEGER (-32767..32767)
```
### DrivenLineOffsetSm
The DrivenLineOffsetSmall data element is an integer value expressing the offset in a defined axis from a reference
lane number from which a computed lane is offset. The measurement is taken from the reference lane center line to the
new center line, independent of any width values. The units are a signed value with an LSB of 1 cm.
**Unit:** _cm_
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
DrivenLineOffsetSm ::= INTEGER (-2047..2047)
```
### DSecond
* xxxxx
.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
DSecond ::= INTEGER (0..65535)
```
### DSRCmsgID
* xxxxx
.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
DSRCmsgID ::= INTEGER (0..32767)
mapData DSRCmsgID ::= 18
rtcmCorrections DSRCmsgID ::= 28
signalPhaseAndTimingMessage DSRCmsgID ::= 19
signalRequestMessage DSRCmsgID ::= 29
signalStatusMessage DSRCmsgID ::= 30
```
### DYear
* xxxxx
.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
DYear ::= INTEGER (0..4095)
```
### Elevation
* xxxxx
.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
Elevation ::= INTEGER (-4096..61439)
```
### ElevationConfidence
Values:
* **unavailable** (0)
* **elev-500-00** (1)
* **elev-200-00** (2)
* **elev-100-00** (3)
* **elev-050-00** (4)
* **elev-020-00** (5)
* **elev-010-00** (6)
* **elev-005-00** (7)
* **elev-002-00** (8)
* **elev-001-00** (9)
* **elev-000-50** (10)
* **elev-000-20** (11)
* **elev-000-10** (12)
* **elev-000-05** (13)
* **elev-000-02** (14)
* **elev-000-01** (15)
* xxxxx
.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
ElevationConfidence ::= ENUMERATED {
unavailable (0),
elev-500-00 (1),
elev-200-00 (2),
elev-100-00 (3),
elev-050-00 (4),
elev-020-00 (5),
elev-010-00 (6),
elev-005-00 (7),
elev-002-00 (8),
elev-001-00 (9),
elev-000-50 (10),
elev-000-20 (11),
elev-000-10 (12),
elev-000-05 (13),
elev-000-02 (14),
elev-000-01 (15)
}
```
### FuelType
* xxxxx
.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
FuelType ::= INTEGER (0..15)
unknownFuel FuelType ::= 0
gasoline FuelType ::= 1
ethanol FuelType ::= 2
diesel FuelType ::= 3
electric FuelType ::= 4
hybrid FuelType ::= 5
hydrogen FuelType ::= 6
natGasLiquid FuelType ::= 7
natGasComp FuelType ::= 8
propane FuelType ::= 9
```
### GNSSstatus
Values:
* **unavailable** (0)
* **isHealthy** (1)
* **isMonitored** (2)
* **baseStationType** (3)
* **aPDOPofUnder5** (4)
* **inViewOfUnder5** (5)
* **localCorrectionsPresent** (6)
* **networkCorrectionsPresent** (7)
* xxxxx
.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
GNSSstatus ::= BIT STRING {
unavailable (0),
isHealthy (1),
isMonitored (2),
baseStationType (3),
aPDOPofUnder5 (4),
inViewOfUnder5 (5),
localCorrectionsPresent (6),
networkCorrectionsPresent (7)
} (SIZE(8))
```
### HeadingConfidenceDSRC
Values:
* **unavailable** (0)
* **prec10deg** (1)
* **prec05deg** (2)
* **prec01deg** (3)
* **prec0-1deg** (4)
* **prec0-05deg** (5)
* **prec0-01deg** (6)
* **prec0-0125deg** (7)
* xxxxx
.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
HeadingConfidenceDSRC ::= ENUMERATED {
unavailable (0),
prec10deg (1),
prec05deg (2),
prec01deg (3),
prec0-1deg (4),
prec0-05deg (5),
prec0-01deg (6),
prec0-0125deg (7)
}
```
### HeadingDSRC
* xxxxx
.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
HeadingDSRC ::= INTEGER (0..28800)
```
### IntersectionID
* xxxxx
.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
IntersectionID ::= INTEGER (0..65535)
```
### IntersectionStatusObject
Values:
* **manualControlIsEnabled** (0)
* **stopTimeIsActivated** (1)
* **failureFlash** (2)
* **preemptIsActive** (3)
* **signalPriorityIsActive** (4)
* **fixedTimeOperation** (5)
* **trafficDependentOperation** (6)
* **standbyOperation** (7)
* **failureMode** (8)
* **off** (9)
* **recentMAPmessageUpdate** (10)
* **recentChangeInMAPassignedLanesIDsUsed** (11)
* **noValidMAPisAvailableAtThisTime** (12)
* **noValidSPATisAvailableAtThisTime** (13)
* xxxxx
.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
IntersectionStatusObject ::= BIT STRING {
manualControlIsEnabled (0),
stopTimeIsActivated (1),
failureFlash (2),
preemptIsActive (3),
signalPriorityIsActive (4),
fixedTimeOperation (5),
trafficDependentOperation (6),
standbyOperation (7),
failureMode (8),
off (9),
recentMAPmessageUpdate (10),
recentChangeInMAPassignedLanesIDsUsed (11),
noValidMAPisAvailableAtThisTime (12),
noValidSPATisAvailableAtThisTime (13)
} (SIZE(16))
```
### LaneAttributes-Barrier
Values:
* **median-RevocableLane** (0)
* **median** (1)
* **whiteLineHashing** (2)
* **stripedLines** (3)
* **doubleStripedLines** (4)
* **trafficCones** (5)
* **constructionBarrier** (6)
* **trafficChannels** (7)
* **lowCurbs** (8)
* **highCurbs** (9)
* xxxxx
.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
LaneAttributes-Barrier ::= BIT STRING {
median-RevocableLane (0),
median (1),
whiteLineHashing (2),
stripedLines (3),
doubleStripedLines (4),
trafficCones (5),
constructionBarrier (6),
trafficChannels (7),
lowCurbs (8),
highCurbs (9)
} (SIZE (16))
```
### LaneAttributes-Bike
Values:
* **bikeRevocableLane** (0)
* **pedestrianUseAllowed** (1)
* **isBikeFlyOverLane** (2)
* **fixedCycleTime** (3)
* **biDirectionalCycleTimes** (4)
* **isolatedByBarrier** (5)
* **unsignalizedSegmentsPresent** (6)
* xxxxx
.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
LaneAttributes-Bike ::= BIT STRING {
bikeRevocableLane (0),
pedestrianUseAllowed (1),
isBikeFlyOverLane (2),
fixedCycleTime (3),
biDirectionalCycleTimes (4),
isolatedByBarrier (5),
unsignalizedSegmentsPresent (6)
} (SIZE (16))
```
### LaneAttributes-Crosswalk
Values:
* **crosswalkRevocableLane** (0)
* **bicyleUseAllowed** (1)
* **isXwalkFlyOverLane** (2)
* **fixedCycleTime** (3)
* **biDirectionalCycleTimes** (4)
* **hasPushToWalkButton** (5)
* **audioSupport** (6)
* **rfSignalRequestPresent** (7)
* **unsignalizedSegmentsPresent** (8)
* xxxxx
.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
LaneAttributes-Crosswalk ::= BIT STRING {
crosswalkRevocableLane (0),
bicyleUseAllowed (1),
isXwalkFlyOverLane (2),
fixedCycleTime (3),
biDirectionalCycleTimes (4),
hasPushToWalkButton (5),
audioSupport (6),
rfSignalRequestPresent (7),
unsignalizedSegmentsPresent (8)
} (SIZE (16))
```
### LaneAttributes-Parking
Values:
* **parkingRevocableLane** (0)
* **parallelParkingInUse** (1)
* **headInParkingInUse** (2)
* **doNotParkZone** (3)
* **parkingForBusUse** (4)
* **parkingForTaxiUse** (5)
* **noPublicParkingUse** (6)
* xxxxx
.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
LaneAttributes-Parking ::= BIT STRING {
parkingRevocableLane (0),
parallelParkingInUse (1),
headInParkingInUse (2),
doNotParkZone (3),
parkingForBusUse (4),
parkingForTaxiUse (5),
noPublicParkingUse (6)
} (SIZE (16))
```
### LaneAttributes-Sidewalk
Values:
* **sidewalk-RevocableLane** (0)
* **bicyleUseAllowed** (1)
* **isSidewalkFlyOverLane** (2)
* **walkBikes** (3)
* xxxxx
.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
LaneAttributes-Sidewalk ::= BIT STRING {
sidewalk-RevocableLane (0),
bicyleUseAllowed (1),
isSidewalkFlyOverLane (2),
walkBikes (3)
} (SIZE (16))
```
### LaneAttributes-Striping
Values:
* **stripeToConnectingLanesRevocableLane** (0)
* **stripeDrawOnLeft** (1)
* **stripeDrawOnRight** (2)
* **stripeToConnectingLanesLeft** (3)
* **stripeToConnectingLanesRight** (4)
* **stripeToConnectingLanesAhead** (5)
* xxxxx
.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
LaneAttributes-Striping ::= BIT STRING {
stripeToConnectingLanesRevocableLane (0),
stripeDrawOnLeft (1),
stripeDrawOnRight (2),
stripeToConnectingLanesLeft (3),
stripeToConnectingLanesRight (4),
stripeToConnectingLanesAhead (5)
} (SIZE (16))
```
### LaneAttributes-TrackedVehicle
Values:
* **spec-RevocableLane** (0)
* **spec-commuterRailRoadTrack** (1)
* **spec-lightRailRoadTrack** (2)
* **spec-heavyRailRoadTrack** (3)
* **spec-otherRailType** (4)
* xxxxx
.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
LaneAttributes-TrackedVehicle ::= BIT STRING {
spec-RevocableLane (0),
spec-commuterRailRoadTrack (1),
spec-lightRailRoadTrack (2),
spec-heavyRailRoadTrack (3),
spec-otherRailType (4)
} (SIZE (16))
```
### LaneAttributes-Vehicle
Values:
* **isVehicleRevocableLane** (0)
* **isVehicleFlyOverLane** (1)
* **hovLaneUseOnly** (2)
* **restrictedToBusUse** (3)
* **restrictedToTaxiUse** (4)
* **restrictedFromPublicUse** (5)
* **hasIRbeaconCoverage** (6)
* **permissionOnRequest** (7)
* xxxxx
.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
LaneAttributes-Vehicle ::= BIT STRING {
isVehicleRevocableLane (0),
isVehicleFlyOverLane (1),
hovLaneUseOnly (2),
restrictedToBusUse (3),
restrictedToTaxiUse (4),
restrictedFromPublicUse (5),
hasIRbeaconCoverage (6),
permissionOnRequest (7)
} (SIZE (8,...))
```
### LaneConnectionID
* xxxxx
.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
LaneConnectionID ::= INTEGER (0..255)
```
### LaneDirection
Values:
* **ingressPath** (0)
* **egressPath** (1)
* xxxxx
.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
LaneDirection ::= BIT STRING {
ingressPath (0),
egressPath (1)
} (SIZE (2))
```
### LaneID
* xxxxx
.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
LaneID ::= INTEGER (0..255)
```
### LayerID
Large MapData descriptions are not possible to be broadcast with a single message and have to be
fragmented using two or more messages over the air. Therefore, the `DE_layerID` allows defining an
index for fragmentation of large MapData descriptions. The fragmentation of the messages shall be
executed on application layer. The fragmentation occurs on an approach base. This means that almost a
complete approach (e.g. lanes, connectsTo, etc.) has to be included within a fragment.
The decimal value of the `layerID` is used to define the amount of maximum MapData fragments. The
lower value defines the actual fragment.
194
© ISO 2018 â All rights reservedISO/PRF TS 19091:2019 (E)
Example:
If a MapData consists of three fragments (e.g. three approaches), the fragments are identified as follows:
â31 first fragment of three (e.g. approach south);
â33 third fragment of three (e.g. approach north).
â
32 second fragment of three (e.g. approach west);
If there are only two fragments, the fragment identification will be 21, 22.
* xxxxx
.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
LayerID ::= INTEGER (0..100)
```
### LayerType
* xxxxx
.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
LayerType ::= ENUMERATED {
none,
mixedContent,
generalMapData,
intersectionData,
curveData,
roadwaySectionData,
parkingAreaData,
sharedLaneData,
...
}
```
### LaneWidth
* xxxxx
.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
LaneWidth ::= INTEGER (0..32767)
```
### MergeDivergeNodeAngle
* xxxxx
.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
MergeDivergeNodeAngle ::= INTEGER (-180..180)
```
### MinuteOfTheYear
* xxxxx
.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
MinuteOfTheYear ::= INTEGER (0..527040)
```
### MovementPhaseState
The MovementPhaseState data element provides the overall current state of the movement (in many cases a
signal state), including its core phase state and an indication of whether this state is permissive or protected.
It is expected that the allowed transitions from one state to another will be defined by regional deployments. Not all
regions will use all states; however, no new states are to be defined. In most regions a regulatory body provides precise
legal definitions of these state changes. For example, in the US the MUTCD is used, as is indicated in the US regional
variant of the above image. In various regions and modes of transportation, the visual expression of these states varies
(the precise meaning of various color combinations, shapes, and/or flashing etc.). The below definition is designed to to
be independent of these regional conventions.
unavailable (0),
-- This state is used for unknown or error
dark (1),
-- The signal head is dark (unlit)
-- Reds
stop-Then-Proceed (2),
-- Often called 'flashing red' in US
-- Driver Action:
--
Stop vehicle at stop line.
--
Do not proceed unless it is safe.
-- Note that the right to proceed either right or left when
-- it is safe may be contained in the lane description to
-- handle what is called a 'right on red'
stop-And-Remain (3),
-- e.g. called 'red light' in US
-- Driver Action:
--
Stop vehicle at stop line.
--
Do not proceed.
-- Note that the right to proceed either right or left when
-- it is safe may be contained in the lane description to
-- handle what is called a 'right on red'
-- Greens
pre-Movement (4),
-- Not used in the US, red+yellow partly in EU
-- Driver Action:
--
Stop vehicle.
--
Prepare to proceed (pending green)
--
(Prepare for transition to green/go)
permissive-Movement-Allowed (5),
-- Often called 'permissive green' in US
-- Driver Action:
--
Proceed with caution,
--
must yield to all conflicting traffic
-- Conflicting traffic may be present
-- in the intersection conflict area
protected-Movement-Allowed (6),
-- Often called 'protected green' in US
-- Driver Action:
--
Proceed, tossing caution to the wind,
--
in indicated (allowed) direction.
-- Yellows / Ambers
-- The vehicle is not allowed to cross the stop bar if it is possible
-- to stop without danger.
permissive-clearance (7),
-- Often called 'permissive yellow' in US
-- Driver Action:
--
Prepare to stop.
--
Proceed if unable to stop,
--
Clear Intersection.
-- Conflicting traffic may be present
-- in the intersection conflict area
protected-clearance (8),
-- Often called 'protected yellow' in US
-- Driver Action:
--
Prepare to stop.
--
Proceed if unable to stop,
--
in indicated direction (to connected lane)
--
Clear Intersection.
caution-Conflicting-Traffic (9)
-- Often called 'flashing yellow' in US
-- Often used for extended periods of time
-- Driver Action:
--
Proceed with caution,
-- Conflicting traffic may be present
-- in the intersection conflict area
Values:
* **unavailable** (0)
* **dark** (1)
* **stop-Then-Proceed** (2)
* **stop-And-Remain** (3)
* **pre-Movement** (4)
* **permissive-Movement-Allowed** (5)
* **protected-Movement-Allowed** (6)
* **permissive-clearance** (7)
* **protected-clearance** (8)
* **caution-Conflicting-Traffic** (9)
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
MovementPhaseState ::= ENUMERATED {
unavailable (0),
dark (1),
stop-Then-Proceed (2),
stop-And-Remain (3),
pre-Movement (4),
permissive-Movement-Allowed (5),
protected-Movement-Allowed (6),
permissive-clearance (7),
protected-clearance (8),
caution-Conflicting-Traffic (9)
}
```
### MsgCount
The DE_MsgCount data element is used to provide a sequence number within a stream of messages with the same
DSRCmsgID and from the same sender. A sender may initialize this element to any value in the range 0-127 when
sending the first message with a given DSRCmsgID, or if the sender has changed identity (e.g. by changing its
TemporaryID) since sending the most recent message with that DSRCmsgID. Depending on the application the sequence
number may change with every message or may remain fixed during a stream of messages when the content within each
message has not changed from the prior message sent. For this element, the value after 127 is zero.
The receipt of a non-sequential MsgCount value (from the same sending device and message type) implies that one or
more messages from that sending device may have been lost, unless MsgCount has been re-initialized due to an identity
change.
Remarks: In the absence of additional requirements defined in a standard using this data element, the follow guidelines
shall be used.
In usage, some devices change their Temporary ID frequently, to prevent identity tracking, while others do not. A change
in Temporary ID data element value (which also changes the message contents in which it appears) implies that the
MsgCount may also change value.
If a sender is composing a message with new content with a given DSRCmsgID, and the TemporaryID has not changed
since it sent the previous message, the sender shall increment the previous value.
If a sender is composing a message with new content with a given DSRCmsgID, and the TemporaryID has changed since
it sent the previous message, the sender may set the MsgCount element to any valid value in the range (including
incrementing the previous value).
If a sender is composing a message with the same content as the most recent message with the same DSRCmsgID, and
less than 10 seconds have elapsed since it sent the previous message with that DSRCmsgID, the sender will use the
same MsgCount as sent in the previous message.
If a sender is composing a message with the same content as the most recent message with the same DSRCmsgID, and
at least 10 seconds have elapsed since it sent the previous message with that DSRCmsgID, the sender may set the
MsgCount element to any valid value in the range; this includes the re-use of the previous value.
If a sending device sends more than one stream of messages from message types that utilize the MsgCount element, it
shall maintain a separate MsgCount state for each message type so that the MsgCount value in a given message
identifies its place in the stream of that message type. The MsgCount element is a function only of the message type in a
given sending device, not of the one or more applications in that device which may be sending the same type of message.
* xxxxx
.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
MsgCount ::= INTEGER (0..127)
```
### Offset-B09
A 9-bit delta offset in X, Y or Z direction from some known point. For non-vehicle centric coordinate frames of
reference, offset is positive to the East (X) and to the North (Y) directions. The most negative value shall be used to
indicate an unknown value.
-- a range of +- 2.55 meters
* xxxxx
.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
Offset-B09 ::= INTEGER (-256..255)
```
### Offset-B10
A 10-bit delta offset in X, Y or Z direction from some known point. For non-vehicle centric coordinate frames of
reference, offset is positive to the East (X) and to the North (Y) directions. The most negative value shall be used to
indicate an unknown value.
a range of +- 5.11 meters
* xxxxx
.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
Offset-B10 ::= INTEGER (-512..511)
```
### Offset-B11
An 11-bit delta offset in X or Y direction from some known point. For non-vehicle centric coordinate frames of
reference, offset is positive to the East (X) and to the North (Y) directions. The most negative value shall be used to
indicate an unknown value.
a range of +- 10.23 meters
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
Offset-B11 ::= INTEGER (-1024..1023)
```
### Offset-B12
A 12-bit delta offset in X, Y or Z direction from some known point. For non-vehicle centric coordinate frames of
reference, non-vehicle centric coordinate frames of reference, offset is positive to the East (X) and to the North (Y)
directions. The most negative value shall be used to indicate an unknown value.
a range of +- 20.47 meters
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
Offset-B12 ::= INTEGER (-2048..2047)
```
### Offset-B13
A 13-bit delta offset in X or Y direction from some known point. For non-vehicle centric coordinate frames of
reference, offset is positive to the East (X) and to the North (Y) directions. The most negative value shall be used to
indicate an unknown value.
a range of +- 40.95 meters
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
Offset-B13 ::= INTEGER (-4096..4095)
```
### Offset-B14
A 14-bit delta offset in X or Y direction from some known point. For non-vehicle centric coordinate frames of
reference, offset is positive to the East (X) and to the North (Y) directions.
a range of +- 81.91 meters
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
Offset-B14 ::= INTEGER (-8192..8191)
```
### Offset-B16
A 16-bit delta offset in X, Y or Z direction from some known point. For non-vehicle centric coordinate frames of
reference, offset is positive to the East (X) and to the North (Y) directions. The most negative value shall be used to
indicate an unknown value.
a range of +- 327.68 meters
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
Offset-B16 ::= INTEGER (-32768..32767)
```
### PedestrianBicycleDetect
The PedestrianBicycleDetect data element is used to provide an indication of whether Pedestrians and/or Bicyclists
have been detected in the crossing lane.
-- true if ANY Pedestrians or Bicyclists are
-- detected crossing the target lane or lanes
* xxxxx
.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
PedestrianBicycleDetect ::= BOOLEAN
```
### PositionConfidence
The DE_PositionConfidence entry is used to provide the 95% confidence level for the currently reported value of
entries such as the DE_Position entries, taking into account the current calibration and precision of the sensor(s) used to
measure and/or calculate the value. It is used in the horizontal plane. This data element is only to provide the listener with
information on the limitations of the sensing system; not to support any type of automatic error correction or to imply a
guaranteed maximum error. This data element should not be used for fault detection or diagnosis, but if a vehicle is able
to detect a fault, the confidence interval should be increased accordingly. The frame of reference and axis of rotation used
shall be accordance with that defined in Section 11 of this standard.
unavailable (0), -- B'0000 Not Equipped or unavailable
a500m
(1), -- B'0001 500m or about 5 * 10 ^ -3 decimal degrees
a200m
(2), -- B'0010 200m or about 2 * 10 ^ -3 decimal degrees
a100m
(3), -- B'0011 100m or about 1 * 10 ^ -3 decimal degrees
a50m
(4), -- B'0100 50m
or about 5 * 10 ^ -4 decimal degrees
a20m
(5), -- B'0101 20m
or about 2 * 10 ^ -4 decimal degrees
a10m
(6), -- B'0110 10m
or about 1 * 10 ^ -4 decimal degrees
a5m
(7), -- B'0111 5m
or about 5 * 10 ^ -5 decimal degrees
a2m
(8), -- B'1000 2m
or about 2 * 10 ^ -5 decimal degrees
a1m
(9), -- B'1001 1m
or about 1 * 10 ^ -5 decimal degrees
a50cm (10), -- B'1010 0.50m or about 5 * 10 ^ -6 decimal degrees
a20cm (11), -- B'1011 0.20m or about 2 * 10 ^ -6 decimal degrees
a10cm (12), -- B'1100 0.10m or about 1 * 10 ^ -6 decimal degrees
a5cm
(13), -- B'1101 0.05m or about 5 * 10 ^ -7 decimal degrees
a2cm
(14), -- B'1110 0.02m or about 2 * 10 ^ -7 decimal degrees
a1cm
(15) -- B'1111 0.01m or about 1 * 10 ^ -7 decimal degrees
- Encoded as a 4 bit value
Values:
* **unavailable** (0)
* **a500m** (1)
* **a200m** (2)
* **a100m** (3)
* **a50m** (4)
* **a20m** (5)
* **a10m** (6)
* **a5m** (7)
* **a2m** (8)
* **a1m** (9)
* **a50cm** (10)
* **a20cm** (11)
* **a10cm** (12)
* **a5cm** (13)
* **a2cm** (14)
* **a1cm** (15)
* xxxxx
.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
PositionConfidence ::= ENUMERATED {
unavailable (0),
a500m (1),
a200m (2),
a100m (3),
a50m (4),
a20m (5),
a10m (6),
a5m (7),
a2m (8),
a1m (9),
a50cm (10),
a20cm (11),
a10cm (12),
a5cm (13),
a2cm (14),
a1cm (15)
}
```
### PrioritizationResponseStatus
The PrioritizationResponseStatus data element is used in the PrioritizationResponse data frame to indicate the
general status of a prior prioritization request.
unknown
(0),
-- Unknown state
requested
(1),
-- This prioritization request was detected
-- by the traffic controller
processing
(2),
-- Checking request
-- (request is in queue, other requests are prior)
watchOtherTraffic (3),
-- Cannot give full permission,
-- therefore watch for other traffic
-- Note that other requests may be present
granted
(4),
-- Intervention was successful
-- and now prioritization is active
rejected
(5),
-- The prioritization or preemption request was
-- rejected by the traffic controller
maxPresence
(6),
-- The Request has exceeded maxPresence time
-- Used when the controller has determined that
-- the requester should then back off and
-- request an alternative.
reserviceLocked
(7),
-- Prior conditions have resulted in a reservice
-- locked event: the controller requires the
-- passage of time before another similar request
-- will be accepted
Values:
* **unknown** (0)
* **requested** (1)
* **processing** (2)
* **watchOtherTraffic** (3)
* **granted** (4)
* **rejected** (5)
* **maxPresence** (6)
* **reserviceLocked** (7)
* xxxxx
.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
PrioritizationResponseStatus ::= ENUMERATED {
unknown (0),
requested (1),
processing (2),
watchOtherTraffic (3),
granted (4),
rejected (5),
maxPresence (6),
reserviceLocked (7),
...
}
```
### PriorityRequestType
The PriorityRequestType data element provides a means to indicate if a request (found in the Signal Request
Message) represents a new service request, a request update, or a request cancellation for either preemption or priority
services.
Values:
* **priorityRequestTypeReserved** (0)
* **priorityRequest** (1)
* **priorityRequestUpdate** (2)
* **priorityCancellation** (3)
* xxxxx
.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
PriorityRequestType ::= ENUMERATED {
priorityRequestTypeReserved (0),
priorityRequest (1),
priorityRequestUpdate (2),
priorityCancellation (3),
...
}
```
```asn1
noRegion
RegionId ::= 0
addGrpA
RegionId ::= 1
addGrpB
RegionId ::= 2
addGrpC
RegionId ::= 3
```
### RegionId
```asn1
RegionId ::= INTEGER (0..255)
noRegion RegionId ::= 0
addGrpA RegionId ::= 1
addGrpB RegionId ::= 2
addGrpC RegionId ::= 3
```
### RequestID
* xxxxx
.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
RequestID ::= INTEGER (0..255)
```
### RequestImportanceLevel
The RequestImportanceLevel data element is used to state what type of signal request is being made to a signal
controller by a DSRC device in a defined role (such as a police vehicle). The levels of the request typically convey a
sense of urgency or importance with respect to other demands to allow the controller to use predefined business rules to
determine how to respond. These rules will vary in terms of how details of overall importance and urgency are to be
ranked, so they are to be implemented locally. As a result of this regional process, the list below should be assigned well-
defined meanings by the local deployment. These meaning will typically result in assigning a set of values to list for each
vehicle role type that is to be supported.
requestImportanceLevel1
(1), -- The least important request
requestImportanceLevel14
(14), -- The most important request
requestImportanceReserved
(15) -- Reserved for future use
Values:
* **requestImportanceLevelUnKnown** (0)
* **requestImportanceLevel1** (1)
* **requestImportanceLevel2** (2)
* **requestImportanceLevel3** (3)
* **requestImportanceLevel4** (4)
* **requestImportanceLevel5** (5)
* **requestImportanceLevel6** (6)
* **requestImportanceLevel7** (7)
* **requestImportanceLevel8** (8)
* **requestImportanceLevel9** (9)
* **requestImportanceLevel10** (10)
* **requestImportanceLevel11** (11)
* **requestImportanceLevel12** (12)
* **requestImportanceLevel13** (13)
* **requestImportanceLevel14** (14)
* **requestImportanceReserved** (15)
* xxxxx
.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
RequestImportanceLevel ::= ENUMERATED {
requestImportanceLevelUnKnown (0),
requestImportanceLevel1 (1),
requestImportanceLevel2 (2),
requestImportanceLevel3 (3),
requestImportanceLevel4 (4),
requestImportanceLevel5 (5),
requestImportanceLevel6 (6),
requestImportanceLevel7 (7),
requestImportanceLevel8 (8),
requestImportanceLevel9 (9),
requestImportanceLevel10 (10),
requestImportanceLevel11 (11),
requestImportanceLevel12 (12),
requestImportanceLevel13 (13),
requestImportanceLevel14 (14),
requestImportanceReserved (15)
}
```
### RequestSubRole
The RequestSubRole data element is used to further define the details of the role which any DSRC device might
play when making a request to a signal controller. This value is not always needed. For example, perhaps in a
deployment all police vehicles are to be treated equally. The taxonomy of what details are selected to be entered into the
list is a regional choice but should be devised to allow the controller to use predefined business rules to respond using the
data. As another example, perhaps in a regional deployment a cross-city express type of transit vehicle is given a different
service response for the same request than another type of transit vehicle making an otherwise similar request. As a
result of this regional process, the list below should be assigned well-defined meanings by the local deployment. These
meanings will typically result in assigning a set of values to list for each vehicle role type that is to be supported.
requestSubRole1 (1), -- The first type of sub role
requestSubRole14
(14), -- The last type of sub role
requestSubRoleReserved (15) -- Reserved for future use
Values:
* **requestSubRoleUnKnown** (0)
* **requestSubRole1** (1)
* **requestSubRole2** (2)
* **requestSubRole3** (3)
* **requestSubRole4** (4)
* **requestSubRole5** (5)
* **requestSubRole6** (6)
* **requestSubRole7** (7)
* **requestSubRole8** (8)
* **requestSubRole9** (9)
* **requestSubRole10** (10)
* **requestSubRole11** (11)
* **requestSubRole12** (12)
* **requestSubRole13** (13)
* **requestSubRole14** (14)
* **requestSubRoleReserved** (15)
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
RequestSubRole ::= ENUMERATED {
requestSubRoleUnKnown (0),
requestSubRole1 (1),
requestSubRole2 (2),
requestSubRole3 (3),
requestSubRole4 (4),
requestSubRole5 (5),
requestSubRole6 (6),
requestSubRole7 (7),
requestSubRole8 (8),
requestSubRole9 (9),
requestSubRole10 (10),
requestSubRole11 (11),
requestSubRole12 (12),
requestSubRole13 (13),
requestSubRole14 (14),
requestSubRoleReserved (15)
}
```
### RestrictionAppliesTo
The RestrictionAppliesTo data element provides a short list of common vehicle types which may have one or more
special movements at an intersection. In general, these movements are not visible to other traffic with signal heads, but
the SPAT data reflects the state of the movement. Various restricted movements at an intersection can be expressed
using this element to indicate where the movement applies.
none,
-- applies to nothing
equippedTransit,
-- buses etc.
equippedTaxis,
equippedOther,
-- other vehicle types with
-- necessary signal phase state
-- reception equipment
emissionCompliant, -- regional variants with more
-- definitive items also exist
equippedBicycle,
weightCompliant,
heightCompliant,
-- Items dealing with traveler needs serviced by the infrastructure
-- These end users (which are not vehicles) are presumed to be suitably equipped
pedestrians,
slowMovingPersons,
wheelchairUsers,
visualDisabilities,
audioDisabilities, -- hearing
* xxxxx
.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
RestrictionAppliesTo ::= ENUMERATED {
none,
equippedTransit,
equippedTaxis,
equippedOther,
emissionCompliant,
equippedBicycle,
weightCompliant,
heightCompliant,
pedestrians,
slowMovingPersons,
wheelchairUsers,
visualDisabilities,
audioDisabilities,
otherUnknownDisabilities,
...
}
```
### RestrictionClassID
The DE_RestrictionClass data element defines an intersection-unique value to convey data about classes of users.
The mapping used varies with each intersection and is defined in the MAP message if needed. The defined mappings
found there are used to determine when a given class is meant. The typical use of this element is to map additional
movement restrictions or rights (in both the MAP and SPAT messages) to special classes of users (trucks, high sided
vehicles, special vehicles etc.). There is the general presumption that in the absence of this data, any allowed movement
extends to all users.
-- An index value to identify data about classes of users
-- the value used varies with each intersection's
-- needs and is defined in the map to the assigned
-- classes of supported users.
* xxxxx
.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
RestrictionClassID ::= INTEGER (0..255)
```
### RoadRegulatorID
The RoadRegulatorID is a 16-bit globally unique identifier assigned to an entity responsible for assigning
Intersection IDs in the region over which it has such authority. The value zero shall be used for testing, and should only be
used in the absence of a suitable assignment. A single entity which assigns intersection IDs may be assigned several
RoadRegulatorIDs. These assignments are presumed to be permanent.
The value zero shall be used for testing only
* xxxxx
.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
RoadRegulatorID ::= INTEGER (0..65535)
```
### RoadSegmentID
The RoadSegmentID is used to uniquely define a section of roadway within a country or region in a 16-bit field.
Assignment rules for this value are established elsewhere and may use regional assignment schemas that vary. Within
the region the policies used to ensure an assigned valueâs uniqueness before that value is reused is the responsibility of
that region. Such reuse is expected to occur, but over somewhat lengthy epoch (months).
-- The values zero to 255 shall be used for testing only
-- Note that the value assigned to an RoadSegment will be
-- unique within a given regional ID only during its use
* xxxxx
.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
RoadSegmentID ::= INTEGER (0..65535)
```
### RoadwayCrownAngle
The RoadwayCrownAngle data element relates the gross tangential angle of the roadway surface with respect to
the local horizontal axis and is measured at the indicated part of the lane. This measurement is typically made at the
crown (centerline) or at an edge of the lane path. Its typical use is to relate data used in speed warning and traction
calculations for the lane segment or roadway segment in which the measurement is taken.
-- In LSB units of 0.3 degrees of angle
-- over a range of -38.1 to + 38.1 degrees
-- The value -128 shall be used for unknown
-- The value zero shall be used for angles
-- which are between -0.15 and +0.15
* xxxxx
.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
RoadwayCrownAngle ::= INTEGER (-128..127)
```
### RTCMmessage
The RTCMmessage data element contains the stream of octets of the actual RTCM message that is being sent.
The messageâs contents are defined in RTCM Standard 10403.1 and in RTCM Standard 10402.1 and its successors.
Note that most RTCM messages are considerably smaller than the size limit defined here, but that some messages may
need to be broken into smaller messages (as per the rules defined in the RTCM work) in order to be transmitted over
DSRC.
* xxxxx
.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
RTCMmessage ::= OCTET STRING (SIZE(1..1023))
```
### RTCM-Revision
The RTCM-Revision data element provides the specific revision of the RTCM standard which is being used. This is
helpful to know precisely the mapping of the message types to their definitions, as well as some minor transport layer
ordering details when received in the mobile unit. All RTCM SC-104 messages follow a common message numbering
method (wherein all defined messages are given unique values) which can be decoded from the initial octets of the
message. This operation is typically performed by the GNSS rover that consumes the messages, so it is transparent at
the DSRC message set level.
rtcmRev2
(1), -- Std 10402.x et al
rtcmRev3
(2), -- Std 10403.x et al
Remarks: In order to fully support the use of networked transport of RTCM corrections (so-called Ntrip systems), the
enumerated list of protocol types provides for all the common types outlined in RTCM Standard 10410.0, Appendix B. It is
anticipated that revisions 3.x and 2.3 will predominate in practice as they do today. It should also be noted that RTCM
standards use the term `byte` for an 8-bit value, while in this standard the term `octet` is used.
Values:
* **unknown** (0)
* **rtcmRev2** (1)
* **rtcmRev3** (2)
* **reserved** (3)
* xxxxx
.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
RTCM-Revision ::= ENUMERATED {
unknown (0),
rtcmRev2 (1),
rtcmRev3 (2),
reserved (3),
...
}
```
### Scale-B12
A 12-bit signed scaling factor supporting scales from zero (which is not used) to >200%. In this data element, the
value zero is taken to represent a value of one (scale 1:1). Values above and below this add or remove exactly 0.05%
from the initial value of 100%. Hence, a value of 2047 adds 102.35% to 100%, resulting in a scale of 202.35% exactly (the
largest valid scale value). Negative values which would result in an effective final value below zero are not supported. The
smallest valid value allowed is -1999 and the remaining negative values are reserved for future definition.
in steps of 0.05 percent
* xxxxx
.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
Scale-B12 ::= INTEGER (-2048..2047)
```
### SignalGroupID
The SignalGroupID is an index used to map between the internal state machine of one or more signal controllers (or
other types of traffic flow devices) and a common numbering system that can represent all possible combinations of active
states (movements and phases in US traffic terminology). All possible movement variations are assigned a unique value
within the intersection. Conceptually, the ID represents a means to provide a list of lanes in a set which would otherwise
need to be enumerated in the message. The values zero and 255 are reserved, so there may up to 254 different signal
group IDs within one single intersection. The value 255 represents a protected-Movement-Allowed or permissive-
Movement-Allowed condition that exists at all times. This value is applied to lanes, with or without traffic control devices,
that operate as free-flow lanes. Typically referred to as Channelized Right/Left Turn Lanes (in right/left-hand drive
countries).
-- The value 0 shall be used when the ID is
-- not available or not known
-- the value 255 is reserved to indicate a
-- permanent green movement state
-- therefore a simple 8 phase signal controller
-- device might use 1..9 as its groupIDs
* xxxxx
.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
SignalGroupID ::= INTEGER (0..255)
```
### SegmentAttributeXY
This DE is an enumerated list of attributes about the current lane segment which
may be enabled or disabled to indicate the presence or absence of the selected attribute on the segment. A segment is
one or more of the straight lines formed between each set of node points. It is common for a segment attribute to persist
for more than one set of node points if there is any curvature in the lane itself. The described attributes are all binary flags
in that they do not need to convey any additional data. Other attributes allow sending short data values to reflect a setting
which is set and persists in a similar fashion.
Various values which can be Enabled and Disabled for a lane segment
- reserved:
- doNotBlock:
- whiteLine: segment where a vehicle may not come to a stop segment where lane crossing not allowed such as the final few meters of a lane Porous Lane states, merging, turn outs, parking etc.
- mergingLaneLeft
- mergingLaneRight,
,-- indicates porous lanes
- curbOnLeft
- curbOnRight,
,-- indicates presence of curbs
- loadingzoneOnLeft: loading or drop off zones
- loadingzoneOnRight: loading or drop off zones
- turnOutPointOnLeft
- turnOutPointOnRight,
,-- opening to adjacent street/alley/road
- adjacentParkingOnLeft
- adjacentParkingOnRight, -- side of road parking
,
-- Bike Lane Needs
- adjacentBikeLaneOnLeft
- adjacentBikeLaneOnRight, -- presence of marked bike lanes
- sharedBikeLane
- bikeBoxInFront
-- Transit Needs
- transitStopOnLeft
- transitStopOnRight
- transitStopInLane
, -- right of way is shared with bikes
-- who may occupy entire lane width
, -- any form of bus/transit loading
-- with pull in-out access to lane on left
, -- any form of bus/transit loading
-- with pull in-out access to lane on right
, -- any form of bus/transit loading
-- in mid path of the lane
, -- lane is shared with train or trolley
-- not used for crossing tracks
-- Pedestrian Support Attributes
- safeIsland: begin/end a safety island in path
- lowCurbsPresent: for ADA support
- rumbleStripPresent: for ADA support
- audibleSignalingPresent: for ADA support
- adaptiveTimingPresent: for ADA support
- rfSignalRequestPresent: Supports RF push to walk technologies
- partialCurbIntrusion: path is blocked by a median or curb but at least 1 meter remains open for use
and at-grade passage Lane geometry details
- taperToLeft
- taperToRight
- taperToCenterLine
(see standard for defined shapes)
, -- Used to control final path shape
, -- Used to control final path shape
, -- Used to control final path shape
- parallelParking: Parking at an angle with the street
- headInParking: Parking at an angle with the street
- freeParking: No restriction on use of parking
- timeRestrictionsOnParking: Parking is not permitted at all times
typically used when the 'parking' lane becomes a driving lane at times
- costToPark: Used where parking has a cost
- midBlockCurbPresent: a protruding curb near lane edge
- unEvenPavementPresent: a disjoint height at lane edge
Values:
* **reserved**
* **doNotBlock**
* **whiteLine**
* **mergingLaneLeft**
* **mergingLaneRight**
* **curbOnLeft**
* **curbOnRight**
* **loadingzoneOnLeft**
* **loadingzoneOnRight**
* **turnOutPointOnLeft**
* **turnOutPointOnRight**
* **adjacentParkingOnLeft**
* **adjacentParkingOnRight**
* **adjacentBikeLaneOnLeft**
* **adjacentBikeLaneOnRight**
* **sharedBikeLane**
* **bikeBoxInFront**
* **transitStopOnLeft**
* **transitStopOnRight**
* **transitStopInLane**
* **sharedWithTrackedVehicle**
* **safeIsland**
* **lowCurbsPresent**
* **rumbleStripPresent**
* **audibleSignalingPresent**
* **adaptiveTimingPresent**
* **rfSignalRequestPresent**
* **partialCurbIntrusion**
* **taperToLeft**
* **taperToRight**
* **taperToCenterLine**
* **parallelParking**
* **headInParking**
* **freeParking**
* **timeRestrictionsOnParking**
* **costToPark**
* **midBlockCurbPresent**
* **unEvenPavementPresent**
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
SegmentAttributeXY ::= ENUMERATED {
reserved ,
doNotBlock ,
whiteLine ,
mergingLaneLeft ,
mergingLaneRight ,
curbOnLeft ,
curbOnRight ,
loadingzoneOnLeft ,
loadingzoneOnRight ,
turnOutPointOnLeft ,
turnOutPointOnRight ,
adjacentParkingOnLeft ,
adjacentParkingOnRight ,
adjacentBikeLaneOnLeft ,
adjacentBikeLaneOnRight ,
sharedBikeLane ,
bikeBoxInFront ,
transitStopOnLeft ,
transitStopOnRight ,
transitStopInLane ,
sharedWithTrackedVehicle ,
safeIsland ,
lowCurbsPresent ,
rumbleStripPresent ,
audibleSignalingPresent ,
adaptiveTimingPresent ,
rfSignalRequestPresent ,
partialCurbIntrusion ,
taperToLeft ,
taperToRight ,
taperToCenterLine ,
parallelParking ,
headInParking ,
freeParking ,
timeRestrictionsOnParking ,
costToPark ,
midBlockCurbPresent ,
unEvenPavementPresent ,
...
}
```
### SemiMajorAxisAccuracy
This DE is used to express the radius (length) of the semi-major axis of an
ellipsoid representing the accuracy which can be expected from a GNSS system in 5cm steps,
typically at a one sigma level of confidence.
Value is semi-major axis accuracy at one standard dev.
- Range 0-12.7 meter, LSB = .05m
- 254 = any value equal or greater than 12.70 meter
- 255 = unavailable semi-major axis value
**Unit:** _0.05m_
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
SemiMajorAxisAccuracy ::= INTEGER (0..255)
```
### SemiMajorAxisOrientation
This DE is used to orientate the angle of the semi-major axis of an
ellipsoid representing the accuracy which can be expected from a GNSS system with respect to the coordinate system.
Value is orientation of semi-major axis
- relative to true north (0~359.9945078786 degrees)
- LSB units of 360/65535 deg = 0.0054932479
- a value of 0 shall be 0 degrees
- a value of 1 shall be 0.0054932479 degrees
- a value of 65534 shall be 359.9945078786 deg
- a value of 65535 shall be used for orientation unavailable
**Unit:** _360/65535 degree_
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
SemiMajorAxisOrientation ::= INTEGER (0..65535)
```
### SemiMinorAxisAccuracy
This DE is used to express the radius of the semi-minor axis of an ellipsoid
representing the accuracy which can be expected from a GNSS system in 5cm steps, typically at a one sigma level of
confidence.
Value is semi-minor axis accuracy at one standard dev
- range 0-12.7 meter, LSB = .05m
- 254 = any value equal or greater than 12.70 meter
- 255 = unavailable semi-minor axis value
**Unit:** _0.05m_
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
SemiMinorAxisAccuracy ::= INTEGER (0..255)
```
### SpeedAdvice
This data element represents the recommended velocity of an object, typically a vehicle speed along a roadway,
expressed in unsigned units of 0.1 meters per second.
- LSB units are 0.1 m/s
- the value 499 shall be used for values at or greater than 49.9 m/s
- the value 500 shall be used to indicate that speed is unavailable
**Unit:** _0.1 m/s_
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
SpeedAdvice ::= INTEGER (0..500)
```
### SpeedConfidenceDSRC
This DE is used to provide the 95% confidence level for the currently reported
value of DE_Speed, taking into account the current calibration and precision of the sensor(s) used to measure and/or
calculate the value. This data element is only to provide the listener with information on the limitations of the sensing
system, not to support any type of automatic error correction or to imply a guaranteed maximum error. This data element
should not be used for fault detection or diagnosis, but if a vehicle is able to detect a fault, the confidence interval should
be increased accordingly. The frame of reference and axis of rotation used shall be in accordance with that defined
Section 11.
- 0 - `unavailable` : Not Equipped or unavailable
- 1 - `prec100ms` : 100 meters / sec
- 2 - `prec10ms` : 10 meters / sec
- 3 - `prec5ms` : 5 meters / sec
- 4 - `prec1ms` : 1 meters / sec
- 5 - `prec0-1ms` : 0.1 meters / sec
- 6 - `prec0-05ms` : 0.05 meters / sec
- 7 - `prec0-01ms` : 0.01 meters / sec
Values:
* **unavailable** (0)
* **prec100ms** (1)
* **prec10ms** (2)
* **prec5ms** (3)
* **prec1ms** (4)
* **prec0-1ms** (5)
* **prec0-05ms** (6)
* **prec0-01ms** (7)
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
SpeedConfidenceDSRC ::= ENUMERATED {
unavailable (0),
prec100ms (1),
prec10ms (2),
prec5ms (3),
prec1ms (4),
prec0-1ms (5),
prec0-05ms (6),
prec0-01ms (7)
}
```
### TemporaryID
This is the 4 octet random device identifier, called the TemporaryID. When used for a mobile OBU device, this value
will change periodically to ensure the overall anonymity of the vehicle, unlike a typical wireless or wired 802 device ID.
Because this value is used as a means to identify the local vehicles that are interacting during an encounter, it is used in
the message set. Other devices, such as infrastructure (RSUs), may have a fixed value for the temporary ID value. See
also [**StationId**](#StationId) which is used in other deployment regions.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
>>>
NOTE: The circumstances and times at which various DSRC devices (notably OBUs) create and change their current
Temporary ID is a complex application level topic. It should be noted that the Temporary ID is not the same as a device
MAC value, although when used as a means to uniquely identify a device, both have many common properties. It should
further be noted that the MAC value for a mobile OBU device (unlike a typical wireless or wired 802 device) will
periodically change to a new random value to ensure the overall anonymity of the vehicle.
>>>
```asn1
TemporaryID ::= OCTET STRING (SIZE(4))
```
### ThrottleConfidence
This DE is used to provide the 95% confidence level for the currently reported
value of DE [**Throttle**](#Throttle), taking into account the current calibration and precision of the sensor(s) used to measure and/or
calculate the value. This data element is only to provide information on the limitations of the sensing system, not to
support any type of automatic error correction or to imply a guaranteed maximum error. This data element should not be
used for fault detection or diagnosis, but if a vehicle is able to detect a fault, the confidence interval should be increased
accordingly. If a fault that triggers the MIL is of a nature to render throttle performance unreliable, then ThrottleConfidence
should be represented as "notEquipped."
- 0 - `unavailable`: B'00 Not Equipped or unavailable
- 1 - `prec10percent`: B'01 10 percent Confidence level
- 2 - `prec1percent`: B'10 1 percent Confidence level
- 3 - `prec0-5percent`: B'11 0.5 percent Confidence level
Values:
* **unavailable** (0)
* **prec10percent** (1)
* **prec1percent** (2)
* **prec0-5percent** (3)
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
ThrottleConfidence ::= ENUMERATED {
unavailable (0),
prec10percent (1),
prec1percent (2),
prec0-5percent (3)
}
```
### TimeConfidence
The DE_TimeConfidence data element is used to provide the 95% confidence level for the currently reported value
of time, taking into account the current calibration and precision of the sensor(s) used to measure and/or calculate the
value. This data element is only to provide information on the limitations of the sensing system, not to support any type of
automatic error correction or to imply a guaranteed maximum error. This data element should not be used for fault
detection or diagnosis, but if a vehicle is able to detect a fault, the confidence interval should be increased accordingly.
- 0 - `unavailable` : Not Equipped or unavailable
- 1 - `time-100-000` : Better than 100 Seconds
- 2 - `time-050-000` : Better than 50 Seconds
- 3 - `time-020-000` : Better than 20 Seconds
- 4 - `time-010-000` : Better than 10 Seconds
- 5 - `time-002-000` : Better than 2 Seconds
- 6 - `time-001-000` : Better than 1 Second
- 7 - `time-000-500` : Better than 0.5 Seconds
- 8 - `time-000-200` : Better than 0.2 Seconds
- 9 - `time-000-100` : Better than 0.1 Seconds
- 10 - `time-000-050` : Better than 0.05 Seconds
- 12 - `time-000-020` : Better than 0.02 Seconds
- 12 - `time-000-010
time-000-005
time-000-002
time-000-001
(12), -- Better than
(13), -- Better than
(14), -- Better than
(15), -- Better than
-- Better than
time-000-000-5
(16), -- Better than
time-000-000-2
(17), -- Better than
time-000-000-1
(18), -- Better than
time-000-000-05
(19), -- Better than
time-000-000-02
(20), -- Better than
time-000-000-01
(21), -- Better than
time-000-000-005
(22), -- Better than
time-000-000-002
(23), -- Better than
time-000-000-001
(24), -- Better than
-- Better than
time-000-000-000-5
(25), -- Better than
time-000-000-000-2
(26), -- Better than
time-000-000-000-1
(27), -- Better than
time-000-000-000-05
(28), -- Better than
time-000-000-000-02
(29), -- Better than
time-000-000-000-01
(30), -- Better than
time-000-000-000-005
(31), -- Better than
time-000-000-000-002
(32), -- Better than
time-000-000-000-001
(33), -- Better than
-- Better than
time-000-000-000-000-5 (34), -- Better than
time-000-000-000-000-2 (35), -- Better than
time-000-000-000-000-1 (36), -- Better than
time-000-000-000-000-05 (37), -- Better than
time-000-000-000-000-02 (38), -- Better than
time-000-000-000-000-01 (39) -- Better than
}
Page 201 of 267
0.01 Seconds
0.005 Seconds
0.002 Seconds
0.001 Seconds
one millisecond
0.000,5 Seconds
0.000,2 Seconds
0.000,1 Seconds
0.000,05 Seconds
0.000,02 Seconds
0.000,01 Seconds
0.000,005 Seconds
0.000,002 Seconds
0.000,001 Seconds
one micro second
0.000,000,5 Seconds
0.000,000,2 Seconds
0.000,000,1 Seconds
0.000,000,05 Seconds
0.000,000,02 Seconds
0.000,000,01 Seconds
0.000,000,005 Seconds
0.000,000,002 Seconds
0.000,000,001 Seconds
one nano second
0.000,000,000,5 Seconds
0.000,000,000,2 Seconds
0.000,000,000,1 Seconds
0.000,000,000,05 Seconds
0.000,000,000,02 Seconds
0.000,000,000,01 Seconds
Values:
* **unavailable** (0)
* **time-100-000** (1)
* **time-050-000** (2)
* **time-020-000** (3)
* **time-010-000** (4)
* **time-002-000** (5)
* **time-001-000** (6)
* **time-000-500** (7)
* **time-000-200** (8)
* **time-000-100** (9)
* **time-000-050** (10)
* **time-000-020** (11)
* **time-000-010** (12)
* **time-000-005** (13)
* **time-000-002** (14)
* **time-000-001** (15)
* **time-000-000-5** (16)
* **time-000-000-2** (17)
* **time-000-000-1** (18)
* **time-000-000-05** (19)
* **time-000-000-02** (20)
* **time-000-000-01** (21)
* **time-000-000-005** (22)
* **time-000-000-002** (23)
* **time-000-000-001** (24)
* **time-000-000-000-5** (25)
* **time-000-000-000-2** (26)
* **time-000-000-000-1** (27)
* **time-000-000-000-05** (28)
* **time-000-000-000-02** (29)
* **time-000-000-000-01** (30)
* **time-000-000-000-005** (31)
* **time-000-000-000-002** (32)
* **time-000-000-000-001** (33)
* **time-000-000-000-000-5** (34)
* **time-000-000-000-000-2** (35)
* **time-000-000-000-000-1** (36)
* **time-000-000-000-000-05** (37)
* **time-000-000-000-000-02** (38)
* **time-000-000-000-000-01** (39)
* xxxxx
.
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
TimeConfidence ::= ENUMERATED {
unavailable (0),
time-100-000 (1),
time-050-000 (2),
time-020-000 (3),
time-010-000 (4),
time-002-000 (5),
time-001-000 (6),
time-000-500 (7),
time-000-200 (8),
time-000-100 (9),
time-000-050 (10),
time-000-020 (11),
time-000-010 (12),
time-000-005 (13),
time-000-002 (14),
time-000-001 (15),
time-000-000-5 (16),
time-000-000-2 (17),
time-000-000-1 (18),
time-000-000-05 (19),
time-000-000-02 (20),
time-000-000-01 (21),
time-000-000-005 (22),
time-000-000-002 (23),
time-000-000-001 (24),
time-000-000-000-5 (25),
time-000-000-000-2 (26),
time-000-000-000-1 (27),
time-000-000-000-05 (28),
time-000-000-000-02 (29),
time-000-000-000-01 (30),
time-000-000-000-005 (31),
time-000-000-000-002 (32),
time-000-000-000-001 (33),
time-000-000-000-000-5 (34),
time-000-000-000-000-2 (35),
time-000-000-000-000-1 (36),
time-000-000-000-000-05 (37),
time-000-000-000-000-02 (38),
time-000-000-000-000-01 (39)
}
```
### TimeIntervalConfidence
This is the statistical confidence for the predicted time of signal group state change. For evaluation, the formula
10(x/a)-b with a=82.5 and b=1.3 was used. The values are encoded as probability classes with proposed values listed in
the below table in the ASN.1 specification.
Value: Probability
- 0 - 21%
- 1 - 36%
- 2 - 47%
- 3 - 56%
- 4 - 62%
- 5 - 68%
- 6 - 73%
- 7 - 77%
- 8 - 81%
- 9 - 85%
- 10 - 88%
- 11 - 91%
- 12 - 94%
- 13 - 96%
- 14 - 98%
- 15 - 100%
**Unit:** _percent_
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
TimeIntervalConfidence ::= INTEGER (0..15)
```
### TransitVehicleOccupancy
This DE is used to relate basic level of current ridership.
Values:
* **occupancyUnknown** (0)
* **occupancyEmpty** (1)
* **occupancyVeryLow** (2)
* **occupancyLow** (3)
* **occupancyMed** (4)
* **occupancyHigh** (5)
* **occupancyNearlyFull** (6)
* **occupancyFull** (7)
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
TransitVehicleOccupancy ::= ENUMERATED {
occupancyUnknown (0),
occupancyEmpty (1),
occupancyVeryLow (2),
occupancyLow (3),
occupancyMed (4),
occupancyHigh (5),
occupancyNearlyFull (6),
occupancyFull (7)
}
```
### TransitVehicleStatus
This DE is used to relate basic information about the transit run in progress. This is
typically used in a priority request to a signalized system and becomes part of the input processing for how that system
will respond to the request.
- 0 - `loading`: parking and unable to move at this time
- 1 - `anADAuse`: an ADA access is in progress (wheelchairs, kneeling, etc.)
- 2 - `aBikeLoad`: loading of a bicycle is in progress
- 3 - `doorOpen`: a vehicle door is open for passenger access
- 4 - `charging`: a vehicle is connected to charging point
- 5 - `atStopLine`: a vehicle is at the stop line for the lane it is in
Values:
* **loading** (0)
* **anADAuse** (1)
* **aBikeLoad** (2)
* **doorOpen** (3)
* **charging** (4)
* **atStopLine** (5)
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
>>>
NOTE: Most of these values are used to detect that the transit vehicle in not in a state where movement can occur
(and that therefore any priority signal should be ignored until the vehicle is again ready to depart).
>>>
```asn1
TransitVehicleStatus ::= BIT STRING {
loading (0),
anADAuse (1),
aBikeLoad (2),
doorOpen (3),
charging (4),
atStopLine (5)
} (SIZE(8))
```
### TransmissionState
This DE is used to provide the current state of the vehicle transmission.
Values:
* **neutral** (0)
* **park** (1)
* **forwardGears** (2)
* **reverseGears** (3)
* **reserved1** (4)
* **reserved2** (5)
* **reserved3** (6)
* **unavailable** (7)
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
TransmissionState ::= ENUMERATED {
neutral (0),
park (1),
forwardGears (2),
reverseGears (3),
reserved1 (4),
reserved2 (5),
reserved3 (6),
unavailable (7)
}
```
### VehicleHeight
The height of the vehicle, measured from the ground to the highest surface, excluding any antenna(s), and
expressed in units of 5 cm. In cases of vehicles with adjustable ride heights, camper shells, and other devices which may
cause the overall height to vary, the largest possible height will be used.
Value is the height of the vehicle, LSB units of 5 cm, range to 6.35 meters
**Unit:** _5cm_
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
VehicleHeight ::= INTEGER (0..127)
```
### VehicleType
This DE is a type list (i.e., a classification list) of the vehicle in terms of overall size. The
data element entries follow the definitions defined in the US DOT Highway Performance Monitoring System (HPMS).
Many infrastructure roadway operators collect and classify data according to this list for regulatory reporting needs.
Within the ITS industry and within the DSRC message set standards work, there are many similar lists of types for
overlapping needs and uses.
- 0 - `none`: Not Equipped, Not known or unavailable
- 1 - `unknown`: Does not fit any other category
- 2 - `special`: Special use
- 3 - `moto`: Motorcycle
- 4 - `car`: Passenger car
- 5 - `carOther`: Four tire single units
- 6 - `bus`: Buses
- 7 - `axleCnt2`: Two axle, six tire single units
- 8 - `axleCnt3`: Three axle, single units
- 9 - `axleCnt4`: Four or more axle, single unit
- 10 - `axleCnt4Trailer`: Four or less axle, single trailer
- 11 - `axleCnt5Trailer`: Five or less axle, single trailer
- 12 - `axleCnt6Trailer`: Six or more axle, single trailer
- 13 - `axleCnt5MultiTrailer`: Five or less axle, multi-trailer
- 14 - `axleCnt6MultiTrailer`: Six axle, multi-trailer
- 15 - `axleCnt7MultiTrailer`: Seven or more axle, multi-trailer
Values:
* **none** (0)
* **unknown** (1)
* **special** (2)
* **moto** (3)
* **car** (4)
* **carOther** (5)
* **bus** (6)
* **axleCnt2** (7)
* **axleCnt3** (8)
* **axleCnt4** (9)
* **axleCnt4Trailer** (10)
* **axleCnt5Trailer** (11)
* **axleCnt6Trailer** (12)
* **axleCnt5MultiTrailer** (13)
* **axleCnt6MultiTrailer** (14)
* **axleCnt7MultiTrailer** (15)
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
VehicleType ::= ENUMERATED {
none (0),
unknown (1),
special (2),
moto (3),
car (4),
carOther (5),
bus (6),
axleCnt2 (7),
axleCnt3 (8),
axleCnt4 (9),
axleCnt4Trailer (10),
axleCnt5Trailer (11),
axleCnt6Trailer (12),
axleCnt5MultiTrailer (13),
axleCnt6MultiTrailer (14),
axleCnt7MultiTrailer (15),
...
}
```
### Velocity
This DE represents the velocity of an object, typically a vehicle speed or the recommended speed of
travel along a roadway, expressed in unsigned units of 0.02 meters per second. When used with motor vehicles it may be
combined with the transmission state to form a data frame for use. A value of 8191 shall be used when the speed is
unavailable. Note that Velocity as used here is intended to be a scalar value and not a vector.
The value 8191 indicates that velocity is unavailable
**Unit:** _0.02 m/s_
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
Velocity ::= INTEGER (0..8191)
```
### WaitOnStopline
This DE is used to indicate to the vehicle that it must stop at the stop line and not move past.
If "true", the vehicles on this specific connecting maneuver have to stop on the stop-line and not to enter the collision area
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
WaitOnStopline ::= BOOLEAN
```
### ZoneLength
This DE is used to provide an estimated distance from the stop bar, along the lane
centerline back in the lane to which it pertains. It is used in various ways to relate this distance value. When used with
clearance zones, it represents the point at which the driver can successfully execute the connection maneuver. It is used
in the Clearance Maneuver Assist data frame to relate dynamic data about the lane. It is also used to relate the distance
from the stop bar to the rear edge of any queue. It is further used within the context of a vehicle's traveling speed to
advise on preferred dynamic approach speeds.
0 = unknown,
The value 10000 to be used for Distances >=10000 m (e.g. from known point to another point along a
known path, often against traffic flow direction when used for measuring queues)
**Unit:** _meter_
**Categories:** Infrastructure information
**Revision:** _V1.3.1_
```asn1
ZoneLength ::= INTEGER (0..10000)
```