# ASN.1 module ETSI-ITS-CDD OID: _{itu-t (0) identified-organization (4) etsi (0) itsDomain (5) wg1 (1) 102894 cdd (2) major-version-3 (3) minor-version-1 (1)}_ ## Data Elements: ### AccelerationChange This DE indicates a change of acceleration. The value shall be set to: - 0 - `accelerate` - if the magnitude of the horizontal velocity vector increases. - 1 - `decelerate` - if the magnitude of the horizontal velocity vector decreases.     **Categories**: Kinematics information     **Revision**: _Created in V2.1.1_ ```asn1 AccelerationChange::= ENUMERATED { accelerate (0), decelerate (1) } ``` ### AccelerationConfidence This DE indicates the acceleration confidence value which represents the estimated absolute accuracy of an acceleration value with a default confidence level of 95%. If required, the confidence level can be defined by the corresponding standards applying this DE. The value shall be set to: - `n (n > 0 and n < 101)` if the confidence value is equal to or less than n x 0,1 m/s², and greater than (n-1) x 0,1 m/s², - `101` if the confidence value is out of range i.e. greater than 10 m/s², - `102` if the confidence value is unavailable. The value 0 shall not be used.     **Unit**: _0,1 m/s²_     **Categories**: Kinematics information     **Revision**: _Description revised in V2.1.1_ >>> NOTE: If an acceleration value is received and its confidence value is set to `outOfRange(101)`, it means that the value is not valid and therefore cannot be trusted. Such value is not useful for the application. >>> ```asn1 AccelerationConfidence ::= INTEGER { outOfRange (101), unavailable (102) } (0..102) ``` ### AccelerationControl This DE indicates the current controlling mechanism for longitudinal movement of the vehicle. The data may be provided via the in-vehicle network. It indicates whether a specific in-vehicle acceleration control system is engaged or not. Currently, this DE includes the information of the vehicle brake pedal, gas pedal, emergency brake system, collision warning system, adaptive cruise control system, cruise control system and speed limiter system. The corresponding bit shall be set to 1 under the following conditions: - 0 - `brakePedalEngaged` - Driver is stepping on the brake pedal, - 1 - `gasPedalEngaged` - Driver is stepping on the gas pedal, - 2 - `emergencyBrakeEngaged` - emergency brake system is engaged, - 3 - `collisionWarningEngaged`- collision warning system is engaged, - 4 - `accEngaged` - ACC is engaged, - 5 - `cruiseControlEngaged` - cruise control is engaged, - 6 - `speedLimiterEngaged` - speed limiter is engaged. Otherwise (for example when the corresponding system is not available due to non equipped system or information is unavailable), the corresponding bit shall be set to 0.     **Categories**: Kinematics information     **Revision**: _V1.3.1_ >>> NOTE: The system engagement condition is OEM specific and therefore out of scope of the present document. >>> ```asn1 AccelerationControl ::= BIT STRING { brakePedalEngaged (0), gasPedalEngaged (1), emergencyBrakeEngaged (2), collisionWarningEngaged (3), accEngaged (4), cruiseControlEngaged (5), speedLimiterEngaged (6) } (SIZE(7)) ``` ### AccelerationMagnitudeValue This DE represents the magnitude of the acceleration vector in a defined coordinate system. The value shall be set to: - `0` to indicate no acceleration, - `n (n > 0 and n < 160)` to indicate acceleration equal to or less than n x 0,1 m/s², and greater than (n-1) x 0,1 m/s², - `160` for acceleration values greater than 15,9 m/s², - `161` when the data is unavailable.     **Unit**: _0,1 m/s²_     **Categories**: Kinematics information     **Revision**: _Created in V2.1.1_ >>> NOTE: the formula for values > -160 and <160 results in rounding up to the next value. Zero acceleration is indicated using n=0. >>> ```asn1 AccelerationMagnitudeValue ::= INTEGER { positiveOutOfRange (160), unavailable (161) } (0.. 161) ``` ### AccelerationValue This DE represents the value of an acceleration component in a defined coordinate system. The value shall be set to: - `-160` for acceleration values equal to or less than -16 m/s², - `n (n > -160 and n <= 0)` to indicate negative acceleration equal to or less than n x 0,1 m/s², and greater than (n-1) x 0,1 m/s², - `n (n > 0 and n < 160)` to indicate positive acceleration equal to or less than n x 0,1 m/s², and greater than (n-1) x 0,1 m/s², - `160` for acceleration values greater than 15,9 m/s², - `161` when the data is unavailable.     **Unit**: _0,1 m/s²_     **Categories**: Kinematics information     **Revision**: _Created in V2.1.1_ >>> NOTE: the formula for values > -160 and <160 results in rounding up to the next value. Zero acceleration is indicated using n=0. >>> ```asn1 AccelerationValue ::= INTEGER { negativeOutOfRange (-160), positiveOutOfRange (160), unavailable (161) } (-160 .. 161) ``` ### AccessTechnologyClass This DE indicates an access technology. The value shall be set to: - `0`: in case of any access technology class, - `1`: in case of ITS-G5 access technology class, - `2`: in case of LTE-V2X access technology class, - `3`: in case of NR-V2X access technology class.     **Categories**: Communication information     **Revision**: _Created in V2.1.1_ ```asn1 AccessTechnologyClass ::= ENUMERATED { any (0), itsg5Class (1), ltev2xClass (2), nrv2xClass (3), ... } ``` ### AccidentSubCauseCode This DE represents the value of the sub cause code of the [**CauseCode**](#CauseCode) `accident`. The value shall be set to: - 0 - `unavailable` - in case the information on the sub cause of the accident is unavailable, - 1 - `multiVehicleAccident` - in case more than two vehicles are involved in accident, - 2 - `heavyAccident` - in case the airbag of the vehicle involved in the accident is triggered, the accident requires important rescue and/or recovery work, - 3 - `accidentInvolvingLorry` - in case the accident involves a lorry, - 4 - `accidentInvolvingBus` - in case the accident involves a bus, - 5 - `accidentInvolvingHazardousMaterials`- in case the accident involves hazardous material, - 6 - `accidentOnOppositeLane` - in case the accident happens on opposite lanes, - 7 - `unsecuredAccident` - in case the accident is not secured, - 8 - `assistanceRequested` - in case rescue and assistance are requested, - 9-255 - reserved for future usage.     **Categories**: Traffic information     **Revision**: _V1.3.1_ ```asn1 AccidentSubCauseCode ::= INTEGER { unavailable (0), multiVehicleAccident (1), heavyAccident (2), accidentInvolvingLorry (3), accidentInvolvingBus (4), accidentInvolvingHazardousMaterials (5), accidentOnOppositeLane (6), unsecuredAccident (7), assistanceRequested (8) } (0..255) ``` ### AdverseWeatherCondition-AdhesionSubCauseCode This DE represents the value of the sub cause code of the [**CauseCode**](#CauseCode) `adverseWeatherCondition-Adhesion`. The value shall be set to: - 0 - `unavailable` - in case information on the cause of the low road adhesion is unavailable, - 1 - `heavyFrostOnRoad`- in case the low road adhesion is due to heavy frost on the road, - 2 - `fuelOnRoad` - in case the low road adhesion is due to fuel on the road, - 3 - `mudOnRoad` - in case the low road adhesion is due to mud on the road, - 4 - `snowOnRoad` - in case the low road adhesion is due to snow on the road, - 5 - `iceOnRoad` - in case the low road adhesion is due to ice on the road, - 6 - `blackIceOnRoad` - in case the low road adhesion is due to black ice on the road, - 7 - `oilOnRoad` - in case the low road adhesion is due to oil on the road, - 8 - `looseChippings` - in case the low road adhesion is due to loose gravel or stone fragments detached from a road surface or from a hazard, - 9 - `instantBlackIce` - in case the low road adhesion is due to instant black ice on the road surface, - 10 - `roadsSalted` - when the low road adhesion is due to salted road, - 11-255 - are reserved for future usage.     **Categories**: Traffic information     **Revision**: _V1.3.1_ ```asn1 AdverseWeatherCondition-AdhesionSubCauseCode ::= INTEGER { unavailable (0), heavyFrostOnRoad (1), fuelOnRoad (2), mudOnRoad (3), snowOnRoad (4), iceOnRoad (5), blackIceOnRoad (6), oilOnRoad (7), looseChippings (8), instantBlackIce (9), roadsSalted (10) } (0..255) ``` ### AdverseWeatherCondition-ExtremeWeatherConditionSubCauseCode This DE represents the value of the sub cause codes of the [**CauseCode**](#CauseCode) `adverseWeatherCondition-ExtremeWeatherCondition`. The value shall be set to: - 0 - `unavailable` - in case information on the type of extreme weather condition is unavailable, - 1 - `strongWinds` - in case the type of extreme weather condition is strong wind, - 2 - `damagingHail`- in case the type of extreme weather condition is damaging hail, - 3 - `hurricane` - in case the type of extreme weather condition is hurricane, - 4 - `thunderstorm`- in case the type of extreme weather condition is thunderstorm, - 5 - `tornado` - in case the type of extreme weather condition is tornado, - 6 - `blizzard` - in case the type of extreme weather condition is blizzard. - 7-255 - are reserved for future usage.     **Categories**: Traffic information     **Revision**: _V1.3.1_ ```asn1 AdverseWeatherCondition-ExtremeWeatherConditionSubCauseCode ::= INTEGER { unavailable (0), strongWinds (1), damagingHail (2), hurricane (3), thunderstorm (4), tornado (5), blizzard (6) } (0..255) ``` ### AdverseWeatherCondition-PrecipitationSubCauseCode This DE represents the value of the sub cause codes of the [**CauseCode**](#CauseCode) `adverseWeatherCondition-Precipitation`. The value shall be set to: - 0 - `unavailable` : in case information on the type of precipitation is unavailable, - 1 - `heavyRain` : in case the type of precipitation is heavy rain, - 2 - `heavySnowfall` : in case the type of precipitation is heavy snow fall, - 3 - `softHail` : in case the type of precipitation is soft hail. - 4-255 : are reserved for future usage     **Categories**: Traffic information     **Revision**: _V1.3.1_ ```asn1 AdverseWeatherCondition-PrecipitationSubCauseCode ::= INTEGER { unavailable (0), heavyRain (1), heavySnowfall (2), softHail (3) } (0..255) ``` ### AdverseWeatherCondition-VisibilitySubCauseCode This DE represents the value of the sub cause codes of the [**CauseCode**](#CauseCode) `adverseWeatherCondition-Visibility`. The value shall be set to: - 0 - `unavailable` - in case information on the cause of low visibility is unavailable, - 1 - `fog` - in case the cause of low visibility is fog, - 2 - `smoke` - in case the cause of low visibility is smoke, - 3 - `heavySnowfall` - in case the cause of low visibility is heavy snow fall, - 4 - `heavyRain` - in case the cause of low visibility is heavy rain, - 5 - `heavyHail` - in case the cause of low visibility is heavy hail, - 6 - `lowSunGlare` - in case the cause of low visibility is sun glare, - 7 - `sandstorms` - in case the cause of low visibility is sand storm, - 8 - `swarmsOfInsects`- in case the cause of low visibility is swarm of insects. - 9-255 - are reserved for future usage     **Categories**: Traffic information     **Revision**: _V1.3.1_ ```asn1 AdverseWeatherCondition-VisibilitySubCauseCode ::= INTEGER { unavailable (0), fog (1), smoke (2), heavySnowfall (3), heavyRain (4), heavyHail (5), lowSunGlare (6), sandstorms (7), swarmsOfInsects (8) } (0..255) ``` ### AirHumidity This DE represents the air humidity in tenths of percent. The value shall be set to: - `n (n > 0 and n < 1001)` indicates that the applicable value is equal to or less than n x 0,1 percent and greater than (n-1) x 0,1 percent. - `1001` indicates that the air humidity is unavailable.     **Unit**: _0,1 %_     **Categories**: Basic information     **Revision**: _created in V2.1.1_ ```asn1 AirHumidity ::= INTEGER { oneHundredPercent (1000), unavailable (1001) } (1..1001) ``` ### AltitudeConfidence This DE indicates the altitude confidence value which represents the estimated absolute accuracy of an altitude value of a geographical point with a default confidence level of 95%. If required, the confidence level can be defined by the corresponding standards applying this DE. The value shall be set to: - 0 - `alt-000-01` if the confidence value is equal to or less than 0,01 metre, - 1 - `alt-000-02` if the confidence value is equal to or less than 0,02 metre and greater than 0,01 metre, - 2 - `alt-000-05` if the confidence value is equal to or less than 0,05 metre and greater than 0,02 metre, - 3 - `alt-000-10` if the confidence value is equal to or less than 0,1 metre and greater than 0,05 metre, - 4 - `alt-000-20` if the confidence value is equal to or less than 0,2 metre and greater than 0,1 metre, - 5 - `alt-000-50` if the confidence value is equal to or less than 0,5 metre and greater than 0,2 metre, - 6 - `alt-001-00` if the confidence value is equal to or less than 1 metre and greater than 0,5 metre, - 7 - `alt-002-00` if the confidence value is equal to or less than 2 metres and greater than 1 metre, - 8 - `alt-005-00` if the confidence value is equal to or less than 5 metres and greater than 2 metres, - 9 - `alt-010-00` if the confidence value is equal to or less than 10 metres and greater than 5 metres, - 10 - `alt-020-00` if the confidence value is equal to or less than 20 metres and greater than 10 metres, - 11 - `alt-050-00` if the confidence value is equal to or less than 50 metres and greater than 20 metres, - 12 - `alt-100-00` if the confidence value is equal to or less than 100 metres and greater than 50 metres, - 13 - `alt-200-00` if the confidence value is equal to or less than 200 metres and greater than 100 metres, - 14 - `outOfRange` if the confidence value is out of range, i.e. greater than 200 metres, - 15 - `unavailable` if the confidence value is unavailable     **Categories**: GeoReference information     **Revision**: _Description revised in V2.1.1_ >>> NOTE: If an altitude value is received and its confidence value is set to `outOfRange(14)`, it means that the altitude value is not valid and therefore cannot be trusted. Such value is not useful for the application. >>> ```asn1 AltitudeConfidence ::= ENUMERATED { alt-000-01 (0), alt-000-02 (1), alt-000-05 (2), alt-000-10 (3), alt-000-20 (4), alt-000-50 (5), alt-001-00 (6), alt-002-00 (7), alt-005-00 (8), alt-010-00 (9), alt-020-00 (10), alt-050-00 (11), alt-100-00 (12), alt-200-00 (13), outOfRange (14), unavailable (15) } ``` ### AltitudeValue This DE represents the altitude value in a WGS84 coordinate system. The specific WGS84 coordinate system is specified by the corresponding standards applying this DE. The value shall be set to: - `-100 000` if the altitude is equal to or less than -1 000 m, - `n (n > -100 000 and n < 800 000)` if the altitude is equal to or less than n x 0,01 metre and greater than (n-1) x 0,01 metre, - `800 000` if the altitude greater than 7 999,99 m, - `800 001` if the information is not available.     **Unit**: _0,01 metre_     **Categories**: GeoReference information     **Revision**: _Description revised in V2.1.1 (definition of 800 000 has slightly changed)_ >>> NOTE: the range of this DE does not use the full binary encoding range, but all reasonable values are covered. In order to cover all possible altitude ranges a larger encoding would be necessary. >>> ```asn1 AltitudeValue ::= INTEGER { negativeOutOfRange (-100000), postiveOutOfRange (800000), unavailable (800001) } (-100000..800001) ``` ### AngleConfidence This DE indicates the angle confidence value which represents the estimated absolute accuracy of an angle value with a default confidence level of 95 %. If required, the confidence level can be defined by the corresponding standards applying this DE. The value shall be set to: - `n (n > 0 and n < 126)` if the accuracy is equal to or less than n * 0,1 degrees and greater than (n-1) x * 0,1 degrees, - `126` if the accuracy is out of range, i.e. greater than 12,5 degrees, - `127` if the accuracy information is not available.     **Unit**: _0,1 degrees_     **Categories**: Kinematics information     **Revision**: _Created in V2.1.1_ ```asn1 AngleConfidence ::= INTEGER { outOfRange (126), unavailable (127) } (1..127) ``` ### AngularSpeedConfidence This DE indicates the angular speed confidence value which represents the estimated absolute accuracy of an angular speed value with a default confidence level of 95%. If required, the confidence level can be defined by the corresponding standards applying this DE. For correlation computation, maximum interval levels can be assumed. The value shall be set to: - 0 - `degSec-01` if the accuracy is equal to or less than 1 degree/second, - 1 - `degSec-02` if the accuracy is equal to or less than 2 degrees/second and greater than 1 degree/second, - 2 - `degSec-05` if the accuracy is equal to or less than 5 degrees/second and greater than 2 degrees/second, - 3 - `degSec-10` if the accuracy is equal to or less than 10 degrees/second and greater than 5 degrees/second, - 4 - `degSec-20` if the accuracy is equal to or less than 20 degrees/second and greater than 10 degrees/second, - 5 - `degSec-50` if the accuracy is equal to or less than 50 degrees/second and greater than 20 degrees/second, - 6 - `outOfRange` if the accuracy is out of range, i.e. greater than 50 degrees/second, - 7 - `unavailable` if the accuracy information is unavailable     **Categories**: Kinematics information     **Revision**: _Created in V2.1.1_ ```asn1 AngularSpeedConfidence ::= ENUMERATED { degSec-01 (0), degSec-02 (1), degSec-05 (2), degSec-10 (3), degSec-20 (4), degSec-50 (5), outOfRange (7), unavailable (8) } ``` ### AngularAccelerationConfidence This DE indicates the angular acceleration confidence value which represents the estimated accuracy of an angular acceleration value with a default confidence level of 95%. If required, the confidence level can be defined by the corresponding standards applying this DE. For correlation computation, maximum interval levels shall be assumed. The value shall be set to: - 0 - `degSecSquared-01` if the accuracy is equal to or less than 1 degree/second², - 1 - `degSecSquared-02` if the accuracy is equal to or less than 2 degrees/second² and greater than 1 degree/second², - 2 - `degSecSquared-05` if the accuracy is equal to or less than 5 degree/second² and greater than 1 degree/second², - 3 - `degSecSquared-10` if the accuracy is equal to or less than 10 degree/second² and greater than 5 degree/second², - 4 - `degSecSquared-20` if the accuracy is equal to or less than 20 degrees/second² and greater than 10 degree/second², - 5 - `degSecSquared-50` if the accuracy is equal to or less than 50 degrees/second² and greater than 20 degrees/second², - 6 - `outOfRange` if the accuracy is out of range, i.e. greater than 50 degrees/second², - 7 - `unavailable` if the accuracy information is unavailable.     **Categories**: Kinematics information     **Revision**: _Created in V2.1.1_ ```asn1 AngularAccelerationConfidence ::= ENUMERATED { degSecSquared-01 (0), degSecSquared-02 (1), degSecSquared-05 (2), degSecSquared-10 (3), degSecSquared-20 (4), degSecSquared-50 (5), outOfRange (6), unavailable (7) } ``` ### AxlesCount This DE indicates the number of axles of a passing train. The value shall be set to: - `n(n > 2 and n < 1001)` indicates that the train has n x axles, - `1001`indicates that the number of axles is out of range, - `1002` the information is unavailable.     **Unit**: _Number of axles_     **Categories**: Vehicle information     **Revision**: _Created in V2.1.1_ ```asn1 AxlesCount ::= INTEGER{ outOfRange (1001), unavailable (1002) } (2..1002) ``` ### BarometricPressure This DE represents the measured uncompensated atmospheric pressure. The value shall be set to: - `2999` indicates that the applicable value is less than 29990 Pa, - `n (n >= 3000 and n <= 12000)` indicates that the applicable value is equal to or less than n x 10 Pa and greater than (n-1) x 10 Pa, - `12001` indicates that the values is greater than 120000 Pa, - `12002` indicates that the information is not available.     **Unit**: _10 Pascal_     **Categories**: Basic information     **Revision**: _Created in V2.1.1_ ```asn1 BarometricPressure ::= INTEGER{ outOfRangelower (2999), outOfRangeUpper (12001), unavailable (12002) } (2999..12002) ``` ### BogiesCount This DE indicates the cardinal number of bogies of a train. The value shall be set to: - `n (n > 1 and n < 100)` indicates that the train has n x bogies, - `100`indicates that the number of bogies is out of range, - `101` the information is unavailable.     **Unit**: _Number of bogies_     **Categories**: Vehicle information     **Revision**: _Created in V2.1.1_ ```asn1 BogiesCount ::= INTEGER{ outOfRange (100), unavailable (101) } (2..101) ``` ### CardinalNumber1B The DE represents a cardinal number that counts the size of a set.     **Categories**: Basic information     **Revision**: _Created in V2.1.1_ ```asn1 CardinalNumber1B ::= INTEGER(0..255) ``` ### CardinalNumber3b The DE represents a cardinal number that counts the size of a set.     **Categories**: Basic information     **Revision**: _Created in V2.1.1_ ```asn1 CardinalNumber3b ::= INTEGER(1..8) ``` ### CartesianAngleValue This DE represents an angle value described in a local Cartesian coordinate system, per default counted positive in a right-hand local coordinate system from the abscissa. The value shall be set to: - `n (n > 0 and n < 3600)` if the angle is equal to or less than n x 0,1 degrees, and greater than (n-1) x 0,1 degrees, - `36001` if the accuracy information is not available. The value 3600 shall not be used.     **Unit**: _0,1 degrees_     **Categories**: Kinematics information     **Revision**: _Created in V2.1.1_ ```asn1 CartesianAngleValue ::= INTEGER { valueNotUsed (3600), unavailable (3601) } (0..3601) ``` ### CartesianAngularAccelerationComponentValue This DE represents an angular acceleration value described in a local Cartesian coordinate system, per default counted positive in a right-hand local coordinate system from the abscissa. The value shall be set to: - `-255` if the acceleration is equal to or less than -255 degrees/s², - `n` (`n > -255` and `n < 255`) if the acceleration is equal to or less than n x 1 degree/s², and greater than `(n-1)` x 0,01 degrees/s², - `255` if the acceleration is greater than 254 degrees/s², - `256` if the information is unavailable.     **Unit**: _degree/s² (degrees per second squared)_     **Categories**: Kinematics information     **Revision**: _Created in V2.1.1_ ```asn1 CartesianAngularAccelerationComponentValue ::= INTEGER { negativeOutofRange (-255), positiveOutOfRange (255), unavailable (256) } (-255..256) ``` ### CartesianAngularVelocityComponentValue This DE represents an angular velocity component described in a local Cartesian coordinate system, per default counted positive in a right-hand local coordinate system from the abscissa. The value shall be set to: - `-255` if the velocity is equal to or less than -255 degrees/s, - `n` (`n > -255` and `n < 255`) if the velocity is equal to or less than n x 1 degree/s, and greater than (n-1) x 1 degree/s, - `255` if the velocity is greater than 254 degrees/s, - `256` if the information is unavailable.     **Unit**: _degree/s_     **Categories**: Kinematics information     **Revision**: _Created in V2.1.1_ ```asn1 CartesianAngularVelocityComponentValue ::= INTEGER { negativeOutofRange (-255), positiveOutOfRange (255), unavailable (256) } (-255..256) ``` ### CauseCodeType The DE represents the value of the cause code of an event. The value shall be set to: - 0 - reserved for future use, - 1 - `trafficCondition` - in case the type of event is an abnormal traffic condition, - 2 - `accident` - in case the type of event is a road accident, - 3 - `roadworks` - in case the type of event is roadwork, - 4 - reserved for future usage, - 5 - `impassability` - in case the type of event is unmanaged road blocking, referring to any blocking of a road, partial or total, which has not been adequately secured and signposted, - 6 - `adverseWeatherCondition-Adhesion` - in case the type of event is low adhesion, - 7 - `aquaplaning` - danger of aquaplaning on the road, - 8 - reserved for future usage, - 9 - `hazardousLocation-SurfaceCondition` - in case the type of event is abnormal road surface condition, - 10 - `hazardousLocation-ObstacleOnTheRoad` - in case the type of event is obstacle on the road, - 11 - `hazardousLocation-AnimalOnTheRoad` - in case the type of event is animal on the road, - 12 - `humanPresenceOnTheRoad` - in case the type of event is human presence on the road, - 13 - reserved for future usage, - 14 - `wrongWayDriving` - in case the type of the event is vehicle driving in wrong way, - 15 - `rescueAndRecoveryWorkInProgress` - in case the type of event is rescue and recovery work for accident or for a road hazard in progress, - 16 - reserved for future usage, - 17 - `adverseWeatherCondition-ExtremeWeatherCondition`- in case the type of event is extreme weather condition, - 18 - `adverseWeatherCondition-Visibility` - in case the type of event is low visibility, - 19 - `adverseWeatherCondition-Precipitation` - in case the type of event is precipitation, - 20 - `violence` - in case the the type of event is human violence on or near the road, - 21-25 - reserved for future usage, - 26 - `slowVehicle` - in case the type of event is slow vehicle driving on the road, - 27 - `dangerousEndOfQueue` - in case the type of event is dangerous end of vehicle queue, - 28-90 - are reserved for future usage, - 91 - `vehicleBreakdown` - in case the type of event is break down vehicle on the road, - 92 - `postCrash` - in case the type of event is a detected crash, - 93 - `humanProblem` - in case the type of event is human health problem in vehicles involved in traffic, - 94 - `stationaryVehicle` - in case the type of event is stationary vehicle, - 95 - `emergencyVehicleApproaching` - in case the type of event is approaching vehicle operating emergency mission, - 96 - `hazardousLocation-DangerousCurve` - in case the type of event is dangerous curve, - 97 - `collisionRisk` - in case the type of event is a collision risk, - 98 - `signalViolation` - in case the type of event is signal violation, - 99 - `dangerousSituation` - in case the type of event is dangerous situation in which autonomous safety system in vehicle is activated, - 100 - `railwayLevelCrossing` - in case the type of event is a railway level crossing. - 101-255 - are reserved for future usage.     **Categories**: Traffic information     **Revision**: _V1.3.1_ ```asn1 CauseCodeType ::= INTEGER { trafficCondition (1), accident (2), roadworks (3), impassability (5), adverseWeatherCondition-Adhesion (6), aquaplaning (7), hazardousLocation-SurfaceCondition (9), hazardousLocation-ObstacleOnTheRoad (10), hazardousLocation-AnimalOnTheRoad (11), humanPresenceOnTheRoad (12), wrongWayDriving (14), rescueAndRecoveryWorkInProgress (15), adverseWeatherCondition-ExtremeWeatherCondition (17), adverseWeatherCondition-Visibility (18), adverseWeatherCondition-Precipitation (19), violence (20), slowVehicle (26), dangerousEndOfQueue (27), vehicleBreakdown (91), postCrash (92), humanProblem (93), stationaryVehicle (94), emergencyVehicleApproaching (95), hazardousLocation-DangerousCurve (96), collisionRisk (97), signalViolation (98), dangerousSituation (99), railwayLevelCrossing (100) } (0..255) ``` ### CartesianCoordinateSmall This DF represents the value of a cartesian coordinate with a range of -30,94 metres to +10,00 metres. The value shall be set to: - `3094` if the longitudinal offset is out of range, i.e. less than or equal to -30,94 metres, - `n (n > -3 094 and n < 1 001)` if the longitudinal offset information is equal to or less than n x 0,01 metre and more than (n-1) x 0,01 metre, - `1001` if the longitudinal offset is out of range, i.e. greater than 10 metres.     **Unit**: _0,01 m_     **Categories**: Basic information     **Revision**: _Created in V2.1.1_ ```asn1 CartesianCoordinateSmall::= INTEGER { negativeOutOfRange (-3094), positiveOutOfRange (1001) } (-3094..1001) ``` ### CartesianCoordinate This DF represents the value of a cartesian coordinate with a range of -327,68 metres to + 327,66 metres. The value shall be set to: ` - `-32 768` if the longitudinal offset is out of range, i.e. less than or equal to -327,68 metres, - `n (n > -32 768 and n < 32 767)` if the longitudinal offset information is equal to or less than n x 0,01 metre and more than (n-1) x 0,01 metre, - `32 767` if the longitudinal offset is out of range, i.e. greater than + 327,66 metres.     **Unit**: _0,01 m_     **Categories**: Basic information     **Revision**: _Created in V2.1.1_ ```asn1 CartesianCoordinate::= INTEGER{ negativeOutOfRange (-32768), positiveOutOfRange (32767) } (-32768..32767) ``` ### CartesianCoordinateLarge This DF represents the value of a cartesian coordinate with a range of -1 310,72 metres to + 1 310,70 metres. The value shall be set to: ` - `-131072` if the longitudinal offset is out of range, i.e. less than or equal to -1 310,72 metres, - `n (n > 131 072 and n < 131 071)` if the longitudinal offset information is equal to or less than n x 0,01 metre and more than (n-1) x 0,01 metre, - `131 071` if the longitudinal offset is out of range, i.e. greater than + 1 310,70 metres.     **Unit**: _0,01 m_     **Categories**: Basic information     **Revision**: _Created in V2.1.1_ ```asn1 CartesianCoordinateLarge::= INTEGER{ negativeOutOfRange (-131072), positiveOutOfRange (131071) } (-131072..131071) ``` ### CenDsrcTollingZoneID This DE represents the ID of a CEN DSRC tolling zone.     **Categories**: Communication information     **Revision**: _V1.3.1_ >>> NOTE: this DE is deprecated and shall not be used anymore. >>> ```asn1 CenDsrcTollingZoneID::= ProtectedZoneId ``` ### ClusterBreakupReason This DE indicates the reason why a cluster leader intends to break up the cluster. The value shall be set to: - 0 - `notProvided` - if the information is not provided, - 1 - `clusteringPurposeCompleted` - if the cluster purpose has been completed, - 2 - `leaderMovedOutOfClusterBoundingBox` - if the leader moved out of the cluster's bounding box, - 3 - `joiningAnotherCluster` - if the cluster leader is about to join another cluster, - 4 - `enteringLowRiskAreaBasedOnMaps` - if the cluster is entering an area idenrified as low risk based on the use of maps, - 5 - `receptionOfCpmContainingCluster` - if the leader received a Collective Perception Message containing information about the same cluster. - 6 to 15 - are reserved for future use.     **Categories**: Cluster information     **Revision**: _Created in V2.1.1_ ```asn1 ClusterBreakupReason ::= ENUMERATED { notProvided (0), clusteringPurposeCompleted (1), leaderMovedOutOfClusterBoundingBox (2), joiningAnotherCluster (3), enteringLowRiskAreaBasedOnMaps (4), receptionOfCpmContainingCluster (5), max(15) } ``` ### ClusterLeaveReason This DE indicates the reason why a cluster participant is leaving the cluster. The value shall be set to: - 0 - `notProvided ` - if the information is not provided, - 1 - `clusterLeaderLost` - if the cluster leader cannot be found anymore, - 2 - `clusterDisbandedByLeader` - if the cluster has been disbanded by the leader, - 3 - `outOfClusterBoundingBox` - if the participants moved out of the cluster's bounding box, - 4 - `outOfClusterSpeedRange` - if the cluster speed moved out of a defined range, - 5 - `joiningAnotherCluster` - if the participant is joining another cluster, - 6 - `cancelledJoin` - if the participant is cancelling a joining procedure, - 7 - `failedJoin` - if the participant failed to join the cluster, - 8 - `safetyCondition` - if a safety condition applies. - 9 to 15 - are reserved for future use     **Categories**: Cluster information     **Revision**: _Created in V2.1.1_ ```asn1 ClusterLeaveReason ::= ENUMERATED { notProvided (0), clusterLeaderLost (1), clusterDisbandedByLeader (2), outOfClusterBoundingBox (3), outOfClusterSpeedRange (4), joiningAnotherCluster (5), cancelledJoin (6), failedJoin (7), safetyCondition (8), max(15) } ``` ### CollisionRiskSubCauseCode This DE represents the sub cause codes of the [**CauseCode**](#CauseCode) `collisionRisk`. The value shall be set to: - 0 - `unavailable` - in case information on the type of collision risk is unavailable, - 1 - `longitudinalCollisionRisk`- in case the type of detected collision risk is longitudinal collision risk, e.g. forward collision or face to face collision, - 2 - `crossingCollisionRisk` - in case the type of detected collision risk is crossing collision risk, - 3 - `lateralCollisionRisk` - in case the type of detected collision risk is lateral collision risk, - 4 - `vulnerableRoadUser` - in case the type of detected collision risk involves vulnerable road users e.g. pedestrians or bicycles. - 5-255 - are reserved for future usage.     **Categories**: Traffic information     **Revision**: _V1.3.1_ ```asn1 CollisionRiskSubCauseCode ::= INTEGER { unavailable (0), longitudinalCollisionRisk (1), crossingCollisionRisk (2), lateralCollisionRisk (3), vulnerableRoadUser (4) }(0..255) ``` ### ConfidenceLevel This DE represents a confidence level in percentage. The value shall be set to: - `n (n > 0 and n < 101)` : for the confidence level in %, - `101` : in case the confidence level is not available.     **Unit**: _Percent_     **Categories**: Basic information     **Revision**: _Created in V2.1.1_ ```asn1 ConfidenceLevel ::= INTEGER { unavailable (101) } (1..101) ``` ### CoordinateConfidence This DE indicates the coordinate confidence value which represents the estimated absolute accuracy of a position coordinate with a default confidence level of 95%. If required, the confidence level can be defined by the corresponding standards applying this DE. The value shall be set to: - `n` (`n > 0` and `n < 4095`) if the confidence value is is equal to or less than n x 0,01 metre, and greater than (n-1) x 0,01 metre, - `4095` if the confidence value is greater than 40,94 metres, - `4096` if the confidence value is not available.     **Unit**: _0,01 m_     **Categories**: Basic information     **Revision**: _Created in V2.1.1_ ```asn1 CoordinateConfidence ::= INTEGER { outOfRange (4095), unavailable (4096) } (1..4096) ``` ### CorrelationCellValue This DE represents the Bravais-Pearson correlation value for each cell of a lower triangular correlation matrix. The value shall be set to: - `-100` in case of full negative correlation, - `n` (`n > -100` and `n < 0`) if the correlation is negative and equal to n x 100, - `0` in case of no correlation, - `n` (`n > 0` and `n < 100`) if the correlation is positive and equal to n x 100, - `100` in case of full positive correlation, - `101` in case the correlation information is unavailable.     **Unit**: _the value is scaled by 100_     **Categories**: Sensing information     **Revision**: _Created in V2.1.1_ ```asn1 CorrelationCellValue ::= INTEGER { full-negative-correlation (-100), no-correlation (0), full-positive-correlation (100), unavailable (101) } (-100..101) ``` ### CurvatureCalculationMode The DE describes whether the yaw rate is used to calculate the curvature for a curvature value. The value shall be set to: - 0 - `yawRateUsed` - if the yaw rate is used, - 1 - `yawRateNotUsed` - if the yaw rate is not used, - 2 - `unavailable` - if the information of curvature calculation mode is unknown.     **Categories**: Vehicle information     **Revision**: _V1.3.1_ ```asn1 CurvatureCalculationMode ::= ENUMERATED { yawRateUsed (0), yawRateNotUsed (1), unavailable (2), ... } ``` ### CurvatureConfidence This DE indicates the acceleration confidence value which represents the estimated absolute accuracy range of a curvature value with a confidence level of 95%. If required, the confidence level can be defined by the corresponding standards applying this DE. The value shall be set to: - 0 - `onePerMeter-0-00002` if the confidence value is less than or equal to 0,00002 m-1, - 1 - `onePerMeter-0-0001` if the confidence value is less than or equal to 0,0001 m-1 and greater than 0,00002 m-1, - 2 - `onePerMeter-0-0005` if the confidence value is less than or equal to 0,0005 m-1 and greater than 0,0001 m-1, - 3 - `onePerMeter-0-002` if the confidence value is less than or equal to 0,002 m-1 and greater than 0,0005 m-1, - 4 - `nePerMeter-0-01` if the confidence value is less than or equal to 0,01 m-1 and greater than 0,002 m-1, - 5 - `nePerMeter-0-1` if the confidence value is less than or equal to 0,1 m-1 and greater than 0,01 m-1, - 6 - `outOfRange` if the confidence value is out of range, i.e. greater than 0,1 m-1, - 7 - `unavailable` if the confidence value is not available.     **Categories**: Vehicle information     **Revision**: _Description revised in V2.1.1_ >>> NOTE: If a curvature value is received and its confidence value is set to 'outOfRange(6)', it means that the curvature value is not valid and therefore cannot be trusted. Such value is not useful for the application. >>> ```asn1 CurvatureConfidence ::= ENUMERATED { onePerMeter-0-00002 (0), onePerMeter-0-0001 (1), onePerMeter-0-0005 (2), onePerMeter-0-002 (3), onePerMeter-0-01 (4), onePerMeter-0-1 (5), outOfRange (6), unavailable (7) } ``` ### CurvatureValue This DE describes vehicle turning curve with the following information: ``` Value = 1 / Radius * 10000 ``` wherein radius is the vehicle turning curve radius in metres. Positive values indicate a turning curve to the left hand side of the driver. It corresponds to the vehicle coordinate system as defined in ISO 8855 [2]. The value shall be set to: - `-1023` for values smaller than -1023, - `n` (`n > -1023` and `n < 0) for negative values equal to or less than n, and greater than (n-1), - `0` when the vehicle is moving straight, - `n` (`n > 0` and `n < 1022) for positive values equal to or less than n, and greater than (n-1), - `1022`, for values greater than 1021, - `1023`, if the information is not available.     **Unit**: _1 over 10 000 metres_     **Categories**: Vehicle information     **Revision**: _description revised in V2.1.1 (the definition of value 1022 has changed slightly)_ >>> NOTE: The present DE is limited to vehicle types as defined in ISO 8855 [2]. >>> ```asn1 CurvatureValue ::= INTEGER { outOfRangeNegative (-1023), straight (0), outOfRangePositive (1022), unavailable (1023) } (-1023..1023) ``` ### DangerousEndOfQueueSubCauseCode This DE represents the value of the sub cause codes of the [**CauseCode**](#CauseCode) `dangerousEndOfQueue`. The value shall be set to: - 0 - `unavailable` - in case information on the type of dangerous queue is unavailable, - 1 - `suddenEndOfQueue`- in case a sudden end of queue is detected, e.g. due to accident or obstacle, - 2 - `queueOverHill` - in case the dangerous end of queue is detected on the road hill, - 3 - `queueAroundBend` - in case the dangerous end of queue is detected around the road bend, - 4 - `queueInTunnel` - in case queue is detected in tunnel, - 5-255 - reserved for future usage.     **Categories**: Traffic information     **Revision**: _V1.3.1_ ```asn1 DangerousEndOfQueueSubCauseCode ::= INTEGER { unavailable (0), suddenEndOfQueue (1), queueOverHill (2), queueAroundBend (3), queueInTunnel (4) } (0..255) ``` ### DangerousGoodsBasic This DE indicates the type of the dangerous goods being carried by a heavy vehicle. The value is assigned according to `class` and `division` definitions of dangerous goods as specified in part II, chapter 2.1.1.1 of European Agreement concerning the International Carriage of Dangerous Goods by Road [i.3].     **Categories**: Vehicle information     **Revision**: _V1.3.1_ ```asn1 DangerousGoodsBasic::= ENUMERATED { explosives1 (0), explosives2 (1), explosives3 (2), explosives4 (3), explosives5 (4), explosives6 (5), flammableGases (6), nonFlammableGases (7), toxicGases (8), flammableLiquids (9), flammableSolids (10), substancesLiableToSpontaneousCombustion (11), substancesEmittingFlammableGasesUponContactWithWater (12), oxidizingSubstances (13), organicPeroxides (14), toxicSubstances (15), infectiousSubstances (16), radioactiveMaterial (17), corrosiveSubstances (18), miscellaneousDangerousSubstances (19) } ``` ### DangerousSituationSubCauseCode This DE represents the value of the sub cause codes of the [**CauseCode**](#CauseCode) `dangerousSituation` The value shall be set to: - 0 - `unavailable` - in case information on the type of dangerous situation is unavailable, - 1 - `emergencyElectronicBrakeEngaged` - in case emergency electronic brake is engaged, - 2 - `preCrashSystemEngaged` - in case pre-crash system is engaged, - 3 - `espEngaged` - in case Electronic Stability Program (ESP) system is engaged, - 4 - `absEngaged` - in case Anti-lock Braking System (ABS) is engaged, - 5 - `aebEngaged` - in case Autonomous Emergency Braking (AEB) system is engaged, - 6 - `brakeWarningEngaged` - in case brake warning is engaged, - 7 - `collisionRiskWarningEngaged` - in case collision risk warning is engaged, - 8-255 - reserved for future usage.     **Categories**: Traffic information     **Revision**: _V1.3.1_ ```asn1 DangerousSituationSubCauseCode ::= INTEGER { unavailable (0), emergencyElectronicBrakeEngaged (1), preCrashSystemEngaged (2), espEngaged (3), absEngaged (4), ebEngaged (5), brakeWarningEngaged (6), collisionRiskWarningEngaged (7) } (0..255) ``` ### DeltaAltitude This DE represents an offset altitude with regards to a defined altitude value. It may be used to describe a geographical point with regards to a specific reference geographical position. The value shall be set to: - `-12 700` for values equal to or lower than -127 metres, - `n` (`n > -12 700` and `n <= 0) for altitude offset n x 0,01 metre below the reference position, - `0` for no altitudinal offset, - `n` (`n > 0` and `n < 12799`) for altitude offset n x 0,01 metre above the reference position, - `12 799` for values equal to or greater than 127,99 metres, - `12 800` when the information is unavailable.     **Unit**: _0,01 metre_     **Categories**: GeoReference information     **Revision**: _editorial update in V2.1.1_ ```asn1 DeltaAltitude ::= INTEGER { negativeOutOfRange (-12700), positiveOutOfRange (12799), unavailable (12800) } (-12700..12800) ``` ### DeltaLatitude This DE represents an offset latitude with regards to a defined latitude value. It may be used to describe a geographical point with regards to a specific reference geographical position. The value shall be set to: - `n` (`n >= -131 071` and `n < 0`) for offset n x 10^-7 degree towards the south from the reference position, - `0` for no latitudinal offset, - `n` (`n > 0` and `n < 131 072`) for offset n x 10^-7 degree towards the north from the reference position, - `131 072` when the information is unavailable.     **Unit**: _10^-7 degree_     **Categories**: GeoReference information     **Revision**: _editorial update in V2.1.1_ ```asn1 DeltaLatitude ::= INTEGER { unavailable (131072) } (-131071..131072) ``` ### DeltaLongitude This DE represents an offset longitude with regards to a defined longitude value. It may be used to describe a geographical point with regards to a specific reference geographical position. The value shall be set to: - `n` (`n >= -131 071` and `n < 0`) for offset n x 10^-7 degree towards the west from the reference position, - `0` for no longitudinal offset, - `n` (`n > 0` and `n < 131 072`) for offset n x 10^-7 degree towards the east from the reference position, - `131 072` when the information is unavailable.     **Unit**: _10^-7 degree_     **Categories**: GeoReference information     **Revision**: _editorial update in V2.1.1_ ```asn1 DeltaLongitude ::= INTEGER { unavailable (131072) } (-131071..131072) ``` ### DeltaTimeMilliSecondPos This DE represents a difference in time with respect to a reference time. Example: a time interval between two consecutive message transmissions.     **Unit**: _0,001 s_     **Categories**: Basic information     **Revision**: _Created in V2.1.1 from the DE TransmissionInterval in [i.2]_ ```asn1 DeltaTimeMilliSecondPos ::= INTEGER (1..10000) ``` ### DeltaTimeMilliSecondPosNeg This DE represents a difference in time with respect to a reference time.     **Unit**: _0,001 s_     **Categories**: Basic information     **Revision**: _Created in V2.1.1_ ```asn1 DeltaTimeMilliSecondPosNeg ::= INTEGER (-1500..1500) ``` ### DeltaTimeQuarterSecond This DE represents a difference in time with respect to a reference time. It can be interpreted as the first 8 bits of a GenerationDeltaTime. To convert it to a [**GenerationDeltaTime**](#GenerationDeltaTime), multiply by 256 (i.e. append a `00` byte)     **Unit**: _256 * 0,001 s_     **Categories**: Basic information     **Revision**: _Created in V2.1.1_ ```asn1 DeltaTimeQuarterSecond::= INTEGER { unavailable (255) } (1..255) ``` ### DeltaTimeTenthOfSecond This DE represents a difference in time with respect to a reference time.     **Unit**: _0,1 s_     **Categories**: Basic information     **Revision**: _Created in V2.1.1_ ```asn1 DeltaTimeTenthOfSecond::= INTEGER { unavailable (127) } (0..127) ``` ### DeltaTimeSecond This DE represents a difference in time with respect to a reference time.     **Unit**: _1 s_     **Categories**: Basic information     **Revision**: _Created in V2.1.1 from ValidityDuration_ ```asn1 DeltaTimeSecond ::= INTEGER (0..86400) ``` ### Direction This DE indicates a direction with respect to a defined reference direction. Example: a reference direction may be implicitly defined by the definition of a geographical zone. The value shall be set to: - 0 - `sameDirection` - to indicate the same direction as the reference direction, - 1 - `oppositeDirection` - to indicate opposite direction as the reference direction, - 2 - `bothDirections` - to indicate both directions, i.e. the same and the opposite direction, - 3 - `unavailable` - to indicate that the information is unavailable.     **Categories**: GeoReference information     **Revision**: _Created in V2.1.1_ ```asn1 Direction::= INTEGER{ sameDirection (0), oppositeDirection (1), bothDirections (2), unavailable (3) } (0..3) ``` ### DriveDirection This DE indicates in which direction something is moving. The value shall be set to: - 0 - `forward` - to indicate it is moving forward, - 1 - `backwards` - to indicate it is moving backwards, - 2 - `unavailable` - to indicate that the information is unavailable.     **Categories**: Kinematics information     **Revision**: _editorial update in V2.1.1_ ```asn1 DriveDirection ::= ENUMERATED { forward (0), backward (1), unavailable (2) } ``` ### DrivingLaneStatus This DE indicates whether a driving lane is open to traffic. A lane is counted from inside border of the road excluding the hard shoulder. The size of the bit string shall correspond to the total number of the driving lanes in the carriageway. The numbering is matched to [**LanePosition**](#LanePosition). The bit `0` is used to indicate the innermost lane, bit `1` is used to indicate the second lane from inside border. If a lane is closed to traffic, the corresponding bit shall be set to `1`. Otherwise, it shall be set to `0`.     **Categories**: Traffic information     **Revision**: _V1.3.1_ >>> NOTE: hard shoulder status is not provided by this DE but in [**HardShoulderStatus**](#HardShoulderStatus). >>> ```asn1 DrivingLaneStatus ::= BIT STRING (SIZE (1..13)) ``` ### EmbarkationStatus This DE indicates whether a vehicle (e.g. public transport vehicle, truck) is under the embarkation process. If that is the case, the value is *TRUE*, otherwise *FALSE*.     **Categories**: Vehicle information     **Revision**: _editorial update in V2.1.1_ ```asn1 EmbarkationStatus ::= BOOLEAN ``` ### EmergencyPriority This DE indicates the right of priority requested or assumed by an operating emergency vehicle. The right-of-priority bit shall be set to `1` if the corresponding right is requested. The corresponding bit shall be set to 1 under the following conditions: - 0 - `requestForRightOfWay` - when the vehicle is requesting/assuming the right of way, - 1 - `requestForFreeCrossingAtATrafficLight` - when the vehicle is requesting/assuming the right to pass at a (red) traffic light.     **Categories**: Traffic information     **Revision**: _description revised in V2.1.1_ ```asn1 EmergencyPriority ::= BIT STRING { requestForRightOfWay (0), requestForFreeCrossingAtATrafficLight (1) } (SIZE(2)) ``` ### EmergencyVehicleApproachingSubCauseCode This DE represents the value of the sub cause codes of the [**CauseCode**](#CauseCode) "emergencyVehicleApproaching". The value shall be set to: - 0 - `unavailable` - in case further detailed information on the emergency vehicle approaching event is unavailable, - 1 - `emergencyVehicleApproaching` - in case an operating emergency vehicle is approaching, - 2 - `prioritizedVehicleApproaching` - in case a prioritized vehicle is approaching, - 3-255 - reserved for future usage.     **Categories**: Traffic information     **Revision**: _V1.3.1_ ```asn1 EmergencyVehicleApproachingSubCauseCode ::= INTEGER { unavailable (0), emergencyVehicleApproaching (1), prioritizedVehicleApproaching (2) } (0..255) ``` ### EnergyStorageType This DE indicated the type of energy being used and stored in vehicle. The corresponding bit shall be set to 1 under the following conditions: - 0 - `hydrogenStorage` - when hydrogen is being used and stored in vehicle, - 1 - `electricEnergyStorage` - when electric energy is being used and stored in vehicle, - 2 - `liquidPropaneGas` - when liquid Propane Gas (LPG) is being used and stored in vehicle, - 3 - `compressedNaturalGas ` - when compressedNaturalGas (CNG) is being used and stored in vehicle, - 4 - `diesel` - when diesel is being used and stored in vehicle, - 5 - `gasoline` - when gasoline is being used and stored in vehicle, - 6 - `ammonia` - when ammonia is being used and stored in vehicle. - Otherwise, the corresponding bit shall be set to `0`.     **Categories**: Vehicle information     **Revision**: _editorial revision in V2.1.1_ ```asn1 EnergyStorageType ::= BIT STRING { hydrogenStorage (0), electricEnergyStorage (1), liquidPropaneGas (2), compressedNaturalGas (3), diesel (4), gasoline (5), ammonia (6) }(SIZE(7)) ``` ### EuVehicleCategoryL This DE represents one of the specific categories in the L category: L1, L2, L3, L4, L5, L6, or L7 according to UNECE/TRANS/WP.29/78/Rev.4 [i.16].     **Categories**: Vehicle information     **Revision**: _V2.1.1_ ```asn1 EuVehicleCategoryL ::= ENUMERATED { l1, l2, l3, l4, l5, l6, l7 } ``` ### EuVehicleCategoryM This DE represents one of the specific categories in the M category: M1, M2, or M3 according to UNECE/TRANS/WP.29/78/Rev.4 [i.16].     **Categories**: Vehicle information     **Revision**: _V2.1.1_ ```asn1 EuVehicleCategoryM ::= ENUMERATED {m1, m2, m3} ``` ### EuVehicleCategoryN This DE represents one of the specific categories in the N category: N1, N2, or N3 according to UNECE/TRANS/WP.29/78/Rev.4 [i.16].     **Categories**: Vehicle information     **Revision**: _V2.1.1_ ```asn1 EuVehicleCategoryN ::= ENUMERATED {n1, n2, n3} ``` ### EuVehicleCategoryO This DE represents one of the specific categories in the O category: O1, O2, O3 or O4 according to UNECE/TRANS/WP.29/78/Rev.4 [i.16].     **Categories**: Vehicle information     **Revision**: _V2.1.1_ ```asn1 EuVehicleCategoryO ::= ENUMERATED {o1, o2, o3, o4} ``` ### ExteriorLights This DE describes the status of the exterior light switches of a vehicle. The corresponding bit shall be set to 1 under the following conditions: - 0 - `lowBeamHeadlightsOn` - when the low beam head light switch is on, - 1 - `highBeamHeadlightsOn` - when the high beam head light switch is on, - 2 - `leftTurnSignalOn` - when the left turnSignal switch is on, - 3 - `rightTurnSignalOn` - when the right turn signal switch is on, - 4 - `daytimeRunningLightsOn` - when the daytime running light switch is on, - 5 - `reverseLightOn` - when the reverse light switch is on, - 6 - `fogLightOn` - when the tail fog light switch is on, - 7 - `parkingLightsOn` - when the parking light switch is on. If a vehicle is not equipped with a certain light or if the light switch status information is not available, the corresponding bit shall be set to `0`. As the bit value indicates only the state of the switch, the turn signal and hazard signal bit values shall not alternate with the blinking interval. For hazard indicator, the `leftTurnSignalOn` (2) and `rightTurnSignalOn` (3) shall be both set to 1.     **Categories**: Vehicle information     **Revision**: _Description revised in V2.1.1_ >>> NOTE: The value of each bit indicates the state of the switch, which commands the corresponding light. The bit corresponding to a specific light is set to `1`, when the corresponding switch is turned on, either manually by the driver or automatically by a vehicle system. The bit value does not indicate if the corresponding lamps are alight or not. >>> ```asn1 ExteriorLights ::= BIT STRING { lowBeamHeadlightsOn (0), highBeamHeadlightsOn (1), leftTurnSignalOn (2), rightTurnSignalOn (3), daytimeRunningLightsOn (4), reverseLightOn (5), fogLightOn (6), parkingLightsOn (7) } (SIZE(8)) ``` ### GenerationDeltaTime This DE represents a timestamp based on TimestampIts modulo 65 536. This means that generationDeltaTime = TimestampIts mod 65 536.     **Categories**: Time information     **Revision**: _Created in V2.1.1 based on ETSI TS 103 900 [i.1]_ ```asn1 GenerationDeltaTime ::= INTEGER { oneMilliSec(1) } (0..65535) ``` ### HardShoulderStatus This DE indicates the current status of a hard shoulder: whether it is available for special usage (e.g. for stopping or for driving) or closed for all vehicles. The value shall be set to: - 0 - `availableForStopping` - if the hard shoulder is available for stopping in e.g. emergency situations, - 1 - `closed` - if the hard shoulder is closed and cannot be occupied in any case, - 2 - `availableForDriving` - if the hard shoulder is available for regular driving.     **Categories**: Traffic information     **Revision**: _Description revised in V2.1.1_ ```asn1 HardShoulderStatus ::= ENUMERATED { availableForStopping (0), closed (1), availableForDriving (2) } ``` ### HazardousLocation-AnimalOnTheRoadSubCauseCode This DE represents the value of the sub cause code of the [**CauseCode**](#CauseCode) `hazardousLocation-AnimalOnTheRoad`. The value shall be set to: - 0 - `unavailable` - in case further detailed information on the animal on the road event is unavailable, - 1 - `wildAnimals` - in case wild animals are detected on the road, - 2 - `herdOfAnimals`- in case herd of animals are detected on the road, - 3 - `smallAnimals` - in case small size animals are detected on the road, - 4 - `largeAnimals` - in case large size animals are detected on the road. - 5-255 - are reserved for future usage.     **Categories**: Traffic information     **Revision**: _V1.3.1_ ```asn1 HazardousLocation-AnimalOnTheRoadSubCauseCode ::= INTEGER { unavailable (0), wildAnimals (1), herdOfAnimals (2), smallAnimals (3), largeAnimals (4) } (0..255) ``` ### HazardousLocation-DangerousCurveSubCauseCode This DE represents the sub cause code of the [**CauseCode**](#CauseCode) `hazardousLocation-DangerousCurve`. The value shall be set to: - 0 - `unavailable` - in case further detailed information on the dangerous curve is unavailable, - 1 - `dangerousLeftTurnCurve` - in case the dangerous curve is a left turn curve, - 2 - `dangerousRightTurnCurve` - in case the dangerous curve is a right turn curve, - 3 - `multipleCurvesStartingWithUnknownTurningDirection` - in case of multiple curves for which the starting curve turning direction is not known, - 4 - `multipleCurvesStartingWithLeftTurn` - in case of multiple curves starting with a left turn curve, - 5 - `multipleCurvesStartingWithRightTurn` - in case of multiple curves starting with a right turn curve. - 6-255 - are reserved for future usage. The definition of whether a curve is dangerous may vary according to region and according to vehicle types/mass and vehicle speed driving on the curve. This definition is out of scope of the present document.     **Categories**: Traffic information     **Revision**: _V1.3.1_ ```asn1 HazardousLocation-DangerousCurveSubCauseCode ::= INTEGER { unavailable (0), dangerousLeftTurnCurve (1), dangerousRightTurnCurve (2), multipleCurvesStartingWithUnknownTurningDirection (3), multipleCurvesStartingWithLeftTurn (4), multipleCurvesStartingWithRightTurn (5) } (0..255) ``` ### HazardousLocation-ObstacleOnTheRoadSubCauseCode This DE represents the value of the sub cause code of the [**CauseCode**](#CauseCode) `hazardousLocation-ObstacleOnTheRoad`. The value shall be set to: - 0 - `unavailable` - in case further detailed information on the detected obstacle is unavailable, - 1 - `shedLoad` - in case detected obstacle is large amount of obstacles (shedload), - 2 - `partsOfVehicles`- in case detected obstacles are parts of vehicles, - 3 - `partsOfTyres` - in case the detected obstacles are parts of tyres, - 4 - `bigObjects` - in case the detected obstacles are big objects, - 5 - `fallenTrees` - in case the detected obstacles are fallen trees, - 6 - `hubCaps` - in case the detected obstacles are hub caps, - 7 - `waitingVehicles`- in case the detected obstacles are waiting vehicles. - 8-255 - are reserved for future usage.     **Categories**: Traffic information     **Revision**: _V1.3.1_ ```asn1 HazardousLocation-ObstacleOnTheRoadSubCauseCode ::= INTEGER { unavailable (0), shedLoad (1), partsOfVehicles (2), partsOfTyres (3), bigObjects (4), fallenTrees (5), hubCaps (6), waitingVehicles (7) } (0..255) ``` ### HazardousLocation-SurfaceConditionSubCauseCode This DE represents the value of the sub cause code of the [**CauseCode**](#CauseCode) `hazardousLocation-SurfaceCondition`. The value shall be set to: - 0 - `unavailable` - in case further detailed information on the road surface condition is unavailable, - 1 - `rockfalls` - in case rock falls are detected on the road surface, - 2 - `earthquakeDamage`- in case the road surface is damaged by earthquake, - 3 - `sewerCollapse` - in case of sewer collapse on the road surface, - 4 - `subsidence` - in case road surface is damaged by subsidence, - 5 - `snowDrifts` - in case road surface is damaged due to snow drift, - 6 - `stormDamage` - in case road surface is damaged by strong storm, - 7 - `burstPipe` - in case road surface is damaged due to pipe burst, - 8 - `volcanoEruption` - in case road surface is damaged due to volcano eruption, - 9 - `fallingIce` - in case road surface damage is due to falling ice, - 10 - `fire` - in case there is fire on or near to the road surface. - 11-255 - are reserved for future usage.     **Categories**: Traffic information     **Revision**: _V1.3.1_ ```asn1 HazardousLocation-SurfaceConditionSubCauseCode ::= INTEGER { unavailable (0), rockfalls (1), earthquakeDamage (2), sewerCollapse (3), subsidence (4), snowDrifts (5), stormDamage (6), burstPipe (7), volcanoEruption (8), fallingIce (9), fire (10) } (0..255) ``` ### HeadingConfidence This DE indicates the heading confidence value which represents the estimated absolute accuracy of a heading value with a confidence level of 95 %. The value shall be set to: - `n (n > 0 and n < 126)` if the confidence value is equal to or less than n x 0,1 degree and more than (n-1) x 0,1 degree, - `126` if the confidence value is out of range, i.e. greater than 12,5 degrees, - `127` if the confidence value information is not available.     **Unit**: _0,1 degree_     **Categories**: GeoReference information     **Revision**: _Description revised in V2.1.1_ >>> NOTE: this DE is kept for backwards compatibility reasons only. It is recommended to use the [**Wgs84AngleConfidence**](#Wgs84AngleConfidence) instead. >>> ```asn1 HeadingConfidence ::= INTEGER { outOfRange (126), unavailable (127) } (1..127) ``` ### HeadingValue This DE represents the orientation of the horizontal velocity vector with regards to the WGS84 north. When the information is not available, the DE shall be set to 3 601. The value 3600 shall not be used. Unit: 0,1 degree Categories: GeoReference information     **Revision**: _Description revised in V2.1.1 (usage of value 3600 specified)_ >>> NOTE: this DE is kept for backwards compatibility reasons only. It is recommended to use the [**Wgs84AngleValue**](#Wgs84AngleValue) instead. >>> ```asn1 HeadingValue ::= INTEGER { wgs84North (0), wgs84East (900), wgs84South (1800), wgs84West (2700), doNotUse (3600), unavailable (3601) } (0..3601) ``` ### HeightLonCarr This DE represents the height of the left or right longitude carrier of vehicle from base to top (left or right carrier seen from vehicle rear to front). The value shall be set to: - `n (n >= 1 and n < 99)` if the height information is equal to or less than n x 0,01 metre and more than (n-1) x 0,01 metre, - `99` if the height is out of range, i.e. equal to or greater than 0,98 m, - `100` if the height information is not available.     **Unit**: _0,01 metre_     **Categories**: Vehicle information     **Revision**: _Description revised in V2.1.1 (the definition of 99 has changed slightly)_ ```asn1 HeightLonCarr ::= INTEGER { outOfRange(99), unavailable(100) } (1..100) ``` ### HumanPresenceOnTheRoadSubCauseCode This DE represents the value of the sub cause code of the [**CauseCode**](#CauseCode) `humanPresenceOnTheRoad`. The value shall be set to: - 0 - `unavailable` - in case further detailed information on human presence on the road is unavailable, - 1 - `childrenOnRoadway` - in case children are detected on the road, - 2 - `cyclistOnRoadway` - in case cyclist presence is detected on the road, - 3 - `motorcyclistOnRoadway`- in case motorcyclist presence is detected on the road. - 4-255 - are reserved for future usage.     **Categories**: Traffic information     **Revision**: _editorial revision in V2.1.1_ ```asn1 HumanPresenceOnTheRoadSubCauseCode ::= INTEGER { unavailable (0), childrenOnRoadway (1), cyclistOnRoadway (2), motorcyclistOnRoadway (3) } (0..255) ``` ### HumanProblemSubCauseCode This DE represents the value of the sub cause codes of the [**CauseCode**](#CauseCode) "humanProblem". The value shall be set to: - 0 - `unavailable` - in case further detailed information on human health problem is unavailable, - 1 - `glycemiaProblem`- in case human problem is due to glycaemia problem, - 2 - `heartProblem` - in case human problem is due to heart problem. - 3-255 - reserved for future usage.     **Categories**: Traffic information     **Revision**: _V1.3.1_ ```asn1 HumanProblemSubCauseCode ::= INTEGER { unavailable (0), glycemiaProblem (1), heartProblem (2) } (0..255) ``` ### Identifier1B This DE is a general identifier.     **Categories**: Basic information     **Revision**: _Created in V2.1.1_ ```asn1 Identifier1B ::= INTEGER (0..255) ``` ### Identifier2B This DE is a general identifier.     **Categories**: Basic information     **Revision**: _Created in V2.1.1_ ```asn1 Identifier2B ::= INTEGER (0..65535) ``` ### InformationQuality This DE represents the quality level of provided information. The value shall be set to: - `0` if the information is unavailable, - `1` if the quality level is lowest, - `n (n > 1 and n < 7)` if the quality level is n, - `7` if the quality level is highest.     **Categories**: Basic information     **Revision**: _Editorial update in V2.1.1_ >>> NOTE: Definition of quality level is out of scope of the present document. >>> ```asn1 InformationQuality ::= INTEGER (0..7) ``` ### InterferenceManagementZoneType This DE defines the type of an interference management zone, so that an ITS-S can assert the actions to do while passing by such zone (e.g. reduce the transmit power in case of a DSRC tolling station). It is an extension of the type [**ProtectedZoneType**](#ProtectedZoneType). The value shall be set to: - 0 - `permanentCenDsrcTolling` - as specified in ETSI TS 102 792 [i.14], - 1 - `temporaryCenDsrcTolling` - as specified in ETSI TS 102 792 [i.14], - 2 - `unavailable` - default value. Set to 2 for backwards compatibility with DSRC tolling, - 3 - `urbanRail` - as specified in ETSI TS 103 724 [i.13], clause 7, - 4 - `satelliteStation` - as specified in ETSI TS 103 724 [i.13], clause 7, - 5 - `fixedLinks` - as specified in ETSI TS 103 724 [i.13], clause 7.     **Categories**: Communication information     **Revision**: _Created in V2.1.1_ ```asn1 InterferenceManagementZoneType ::= ENUMERATED { permanentCenDsrcTolling (0), temporaryCenDsrcTolling (1), unavailable (2), urbanRail (3), satelliteStation (4), fixedLinks (5), ... } ``` ### Iso3833VehicleType This DE represents the vehicle type according to ISO 3833 [3]. A "term No" refers to the number of the corresponding term and its definition in ISO 3833. The value shall be set to: - 0 - `passengerCar` - term No 3.1.1 - 1 - `saloon` - term No 3.1.1.1 (sedan) - 2 - `convertibleSaloon` - term No 3.1.1.2 - 3 - `pullmanSaloon` - term No 3.1.1.3 - 4 - `stationWagon` - term No 3.1.1.4 - 5 - `truckStationWagon` - term No 3.1.1.4.1 - 6 - `coupe` - term No 3.1.1.5 (coupe) - 7 - `convertible` - term No 3.1.1.6 (open tourer, roadstar, spider) - 8 - `multipurposePassengerCar` - term No 3.1.1.7 - 9 - `forwardControlPassengerCar`- term No 3.1.1.8 - 10 - `specialPassengerCar` - term No 3.1.1.9 - 11 - `bus` - term No 3.1.2 - 12 - `minibus` - term No 3.1.2.1 - 13 - `urbanBus` - term No 3.1.2.2 - 14 - `interurbanCoach` - term No 3.1.2.3 - 15 - `longDistanceCoach` - term No 3.1.2.4 - 16 - `articulatedBus` - term No 3.1.2.5 - 17 - `trolleyBus ` - term No 3.1.2.6 - 18 - `specialBus` - term No 3.1.2.7 - 19 - `commercialVehicle ` - term No 3.1.3 - 20 - `specialCommercialVehicle` - term No 3.1.3.1 - 21 - `specialVehicle ` - term No 3.1.4 - 22 - `trailingTowingVehicle ` - term No 3.1.5 (draw-bar tractor) - 23 - `semiTrailerTowingVehicle` - term No 3.1.6 (fifth wheel tractor) - 24 - `trailer` - term No 3.2.1 - 25 - `busTrailer` - term No 3.2.1.1 - 26 - `generalPurposeTrailer` - term No 3.2.1.2 - 27 - `caravan` - term No 3.2.1.3 - 28 - `specialTrailer` - term No 3.2.1.4 - 29 - `semiTrailer` - term No 3.2.2 - 30 - `busSemiTrailer ` - term No 3.2.2.1 - 31 - `generalPurposeSemiTrailer` - term No 3.2.2.2 - 32 - `specialSemiTrailer` - term No 3.2.2.3 - 33 - `roadTrain` - term No 3.3.1 - 34 - `passengerRoadTrain ` - term No 3.3.2 - 35 - `articulatedRoadTrain` - term No 3.3.3 - 36 - `doubleRoadTrain` - term No 3.3.4 - 37 - `compositeRoadTrain` - term No 3.3.5 - 38 - `specialRoadTrain` - term No 3.3.6 - 39 - `moped` - term No 3.4 - 40 - `motorCycle` - term No 3.5 - 41-255 - reserved for future use     **Categories**: Vehicle information     **Revision**: _Created in V2.1.1_ ```asn1 Iso3833VehicleType ::= INTEGER { passengerCar (0), saloon (1), convertibleSaloon (2), pullmanSaloon (3), stationWagon (4), truckStationWagon (5), coupe (6), convertible (7), multipurposePassengerCar (8), forwardControlPassengerCar (9), specialPassengerCar (10), bus (11), minibus (12), urbanBus (13), interurbanCoach (14), longDistanceCoach (15), articulatedBus (16), trolleyBus (17), specialBus (18), commercialVehicle (19), specialCommercialVehicle (20), specialVehicle (21), trailingTowingVehicle (22), semiTrailerTowingVehicle (23), trailer (24), busTrailer (25), generalPurposeTrailer (26), caravan (27), specialTrailer (28), semiTrailer (29), busSemiTrailer (30), generalPurposeSemiTrailer (31), specialSemiTrailer (32), roadTrain (33), passengerRoadTrain (34), articulatedRoadTrain (35), doubleRoadTrain (36), compositeRoadTrain (37), specialRoadTrain (38), moped (39), motorCycle (40) } (0..255) ``` ### LanePosition This DE indicates a transversal position on the carriageway at a specific longitudinal position, in resolution of lanes of the carriageway. For right-hand traffic roads, the value shall be set to: - `-1` if the position is off, i.e. besides the road, - `0` if the position is on the inner hard shoulder, i.e. the hard should adjacent to the leftmost lane, - `n (n >0 and n < 14)`, if the position is on the n-th driving lane counted from the leftmost lane to the rightmost lane of a specific traffic direction, - `14` if the position is on the outer hard shoulder, i.e. the hard should adjacent to rightmost lane (if present). For left-hand traffic roads, the value shall be set to: - `-1` if the position is off, i.e. besides the road, - `0` if the position is on the inner hard shoulder, i.e. the hard should adjacent to the rightmost lane, - `n (n >0 and n < 14)`, if the position is on the n-th driving lane counted from the rightmost lane to the leftmost lane of a specific traffic direction, - `14` if the position is on the outer hard shoulder, i.e. the hard should adjacent to leftmost lane (if present). If the carriageway allows only traffic in one direction (e.g. in case of dual or multiple carriageway roads), the position is counted from the physical border of the carriageway. If the carriageway allows traffic in both directions and there is no physical delimitation between traffic directions (e.g. on a single carrriageway road), the position is counted from the legal (i.e. optical) separation between traffic directions (horizontal marking).     **Categories**: Road topology information     **Revision**: _Description revised in V2.1.1_ >>> NOTE: in practice this means that the position is counted from "inside" to "outside" no matter which traffic practice is used. >>> ```asn1 LanePosition ::= INTEGER { offTheRoad (-1), innerHardShoulder (0), outerHardShoulder (14) } (-1..14) ``` ### LaneType This DE represents the type of a lane. The value shall be set to: - 0 - `traffic` - Lane dedicated to the movement of vehicles, - 1 - `through` - Lane dedicated to the movement of vehicles travelling ahead and not turning, - 2 - `reversible` - Lane where the direction of traffic can be changed to match the peak flow, - 3 - `acceleration` - Lane that allows vehicles entering a road to accelerate to the speed of through traffic before merging with it, - 4 - `deceleration` - Lane that allows vehicles exiting a road to decelerate before leaving it, - 5 - `leftHandTurning` - Lane reserved for slowing down and making a left turn, so as not to disrupt traffic, - 6 - `rightHandTurning` - Lane reserved for slowing down and making a right turn so as not to disrupt traffic, - 7 - `dedicatedVehicle` - Lane dedicated to movement of motor vehicles with specific characteristics, such as heavy goods vehicles, etc., - 8 - `bus` - Lane dedicated to movement of buses providing public transport, - 9 - `taxi` - Lane dedicated to movement of taxis, - 10 - `hov` - Carpooling lane or high occupancy vehicle lane, - 11 - `hot` - High occupancy vehicle lanes that is allowed to be used without meeting the occupancy criteria by paying a toll, - 12 - `pedestrian` - Lanes dedicated to pedestrians such as pedestrian sidewalk paths, - 13 - `cycleLane` - Lane dedicated to exclusive or preferred use by bicycles, - 14 - `median` - Lane not dedicated to movement of vehicles but representing a median / central reservation such as the central median, separating the two directional carriageways of the highway, - 15 - `striping` - Lane not dedicated to movement of vehicles but covered with roadway markings, - 16 - `trackedVehicle` - Lane dedicated to movement of trains, trams and trolleys, - 17 - `parking` - Lanes dedicated to vehicles parking, stopping and loading lanes, - 18 - `emergency` - Lane dedicated to vehicles in breakdown or to emergency vehicles also called hard shoulder, - 19 - `verge` - Lane representing the verge, i.e. a narrow strip of grass or plants and sometimes also trees located between the road surface edge and the boundary of a road, - 20 `minimumRiskManoeuvre` - Lane dedicated to automated vehicles making a minimum risk manoeuvre. - values 21 to 30 reserved for future use.     **Categories**: Road topology information     **Revision**: _Created in V2.1.1_ ```asn1 LaneType::= INTEGER{ traffic (0), through (1), reversible (2), acceleration (3), deceleration (4), leftHandTurning (5), rightHandTurning (6), dedicatedVehicle (7), bus (8), taxi (9), hov (10), hot (11), pedestrian (12), cycleLane (13), median (14), striping (15), trackedVehicle (16), parking (17), emergency (18), verge (19), minimumRiskManoeuvre (20), unknown (31) }(0..31) ``` ### LaneWidth This DE represents the width of a lane measured at a defined position. The value shall be set to: - `n (n >= 1 and n < 1022)` if the lane width information is equal to or less than n x 0,01 metre and more than (n-1) x 0,01 metre, - `1022` if the lane width is out of range, i.e. greater than 10,21 m, - `1023` if the lane width information is not available. The value 0 shall not be used.     **Unit**: _0,01 metre_     **Categories**: GeoReference information     **Revision**: _Created in V2.1.1_ ```asn1 LaneWidth::= INTEGER (0..1023) ``` ### Latitude This DE represents the absolute geographical latitude in a WGS84 coordinate system, providing a range of 90 degrees in north or in south hemisphere. The specific WGS84 coordinate system is specified by the corresponding standards applying this DE. The value shall be set to: - `n (n >= -900 000 000 and n < 0)` x 10^-7 degree, i.e. negative values for latitudes south of the Equator, - `0` is used for the latitude of the equator, - `n (n > 0 and n < 900 000 001)` x 10^-7 degree, i.e. positive values for latitudes north of the Equator, - `900 000 001` when the information is unavailable.     **Unit**: _10^-7 degree_     **Categories**: GeoReference information     **Revision**: _Editorial update in V2.1.1_ ```asn1 Latitude ::= INTEGER { unavailable(900000001) } (-900000000..900000001) ``` ### LateralAccelerationValue This DE represents the vehicle acceleration at lateral direction in the centre of the mass of the empty vehicle. It corresponds to the vehicle coordinate system as specified in ISO 8855 [2]. The value shall be set to: - `-160` for acceleration values equal to or less than -16 m/s², - `n (n > -160 and n <= 0)` to indicate that the vehicle is accelerating towards the right side with regards to the vehicle orientation with acceleration equal to or less than n x 0,1 m/s² and greater than (n-1) x 0,1 m/s², - `n (n > 0 and n < 160)` to indicate that the vehicle is accelerating towards the left hand side with regards to the vehicle orientation with acceleration equal to or less than n x 0,1 m/s² and greater than (n-1) x 0,1 m/s², - `160` for acceleration values greater than 15,9 m/s², - `161` when the data is unavailable.     **Unit**: _0,1 m/s²_     **Categories**: Vehicle information     **Revision**: _Description updated in V2.1.1 (the meaning of 160 has changed slightly)._ >>> NOTE: this DF is kept for backwards compatibility reasons only. It is recommended to use [**AccelerationValue**](#AccelerationValue) instead >>> ```asn1 LateralAccelerationValue ::= INTEGER { negativeOutOfRange (-160), positiveOutOfRange (160), unavailable (161) } (-160 .. 161) ``` ### LightBarSirenInUse This DE indicates the status of light bar and any sort of audible alarm system besides the horn. This includes various common sirens as well as backup up beepers and other slow speed manoeuvring alerts. The corresponding bit shall be set to 1 under the following conditions: - 0 - `lightBarActivated` - when the light bar is activated, - 1 - `sirenActivated` - when the siren is activated. Otherwise, it shall be set to 0.     **Categories**: Vehicle information     **Revision**: _Editorial update in V2.1.1_ ```asn1 LightBarSirenInUse ::= BIT STRING { lightBarActivated (0), sirenActivated (1) } (SIZE(2)) ``` ### Longitude This DE represents the absolute geographical longitude in a WGS84 coordinate system, providing a range of 180 degrees to the east or to the west of the prime meridian. The specific WGS84 coordinate system is specified by the corresponding standards applying this DE. The value shall be set to: - `n (n > -1 800 000 000 and n < 0)` x 10^-7 degree, i.e. negative values for longitudes to the west, - `0` to indicate the prime meridian, - `n (n > 0 and n < 1 800 000 001)` x 10^-7 degree, i.e. positive values for longitudes to the east, - `1 800 000 001` when the information is unavailable. The value -1800000000 shall not be used.     **Unit**: _10^-7 degree_     **Categories**: GeoReference information     **Revision**: _Description revised in V2.1.1_ ```asn1 Longitude ::= INTEGER { valueNotUsed (-1800000000), unavailable (1800000001) } (-1800000000..1800000001) ``` ### LongitudinalAccelerationValue This DE represents the vehicle acceleration at longitudinal direction in the centre of the mass of the empty vehicle. The value shall be provided in the vehicle coordinate system as defined in ISO 8855 [2], clause 2.11. The value shall be set to: - `-160` for acceleration values equal to or less than -16 m/s², - `n (n > -160 and n <= 0)` to indicate that the vehicle is braking with acceleration equal to or less than n x 0,1 m/s², and greater than (n-1) x 0,1 m/s² - `n (n > 0 and n < 160)` to indicate that the vehicle is accelerating with acceleration equal to or less than n x 0,1 m/s², and greater than (n-1) x 0,1 m/s², - `160` for acceleration values greater than 15,9 m/s², - `161` when the data is unavailable. This acceleration is along the tangent plane of the road surface and does not include gravity components.     **Unit**: _0,1 m/s²_     **Categories**: Vehicle information     **Revision**: _description revised in V2.1.1 (the meaning of 160 has changed slightly). T_ >>> NOTE: The empty load vehicle is defined in ISO 1176 [i.8], clause 4.6. >>> ```asn1 LongitudinalAccelerationValue::= INTEGER { negativeOutOfRange (-160), positiveOutOfRange (160), unavailable (161) } (-160 .. 161) ``` ### LongitudinalLanePositionValue This DE represents the longitudinal offset of a map-matched position along a matched lane, beginning from the lane's starting point. The value shall be set to: - `n (n >= 1 and n < 32766)` if the longitudinal offset information is equal to or less than n x 0,1 metre and more than (n-1) x 0,1 metre, - `32 766` if the longitudinal offset is out of range, i.e. greater than 3276,5 m, - `32 767` if the longitudinal offset information is not available.     **Unit**: _0,1 metre_     **Categories**: Road topology information     **Revision**: _Created in V2.1.1_ ```asn1 LongitudinalLanePositionValue ::= INTEGER { outOfRange(32766), unavailable(32767) }(0..32767) ``` ### LongitudinalLanePositionConfidence This DE indicates the longitudinal lane position confidence value which represents the estimated accuracy of longitudinal lane position measurement with a default confidence level of 95%. If required, the confidence level can be defined by the corresponding standards applying this DE. The value shall be set to: - `n (n > 0 and n < 1 022)` if the confidence value is equal to or less than n x 0,1 m, and more than (n-1) x 0,1 m, - `1 022` if the confidence value is out of range i.e. greater than 102,1 m, - `1 023` if the confidence value is unavailable.     **Unit**: _0,1 metre_     **Categories**: Road topology information     **Revision**: _Created in V2.1.1_ ```asn1 LongitudinalLanePositionConfidence ::= INTEGER { outOfRange (1022), unavailable (1023) } (0..1023) ``` ### MatrixIncludedComponents This DE indicates the components of an [**PerceivedObject**](#PerceivedObject) that are included in the [**LowerTriangularPositiveSemidefiniteMatrix**](#LowerTriangularPositiveSemidefiniteMatrix). The corresponding bit shall be set to 1 if the component is included: - 0 - `xCoordinate` - when the component xCoordinate of the component [**CartesianPosition3dWithConfidence**](#CartesianPosition3dWithConfidence) is included, - 1 - `yCoordinate` - when the component yCoordinate of the component [**CartesianPosition3dWithConfidence**](#CartesianPosition3dWithConfidence) is included, - 2 - `zCoordinate` - when the component zCoordinate of the component [**CartesianPosition3dWithConfidence**](#CartesianPosition3dWithConfidence) is included, - 3 - `xVelocityOrVelocityMagnitude` - when the component xVelocity or VelocityMagnitude of the component [**VelocityPolarWithZ**](#VelocityPolarWithZ) is included, - 4 - `yVelocityOrVelocityDirection` - when the component yVelocity or VelocityDirection of the component [**VelocityPolarWithZ**](#VelocityPolarWithZ) is included - 5 - `zVelocity` - when the component zVelocity of the component [**VelocityPolarWithZ**](#VelocityPolarWithZ) is included, - 6 - `xAccelOrAccelMagnitude` - when the component xAcceleration of the component [**AccelerationCartesian**](#AccelerationCartesian) or the component AccelerationMagnitude of the component [**AccelerationPolarWithZ**](#AccelerationPolarWithZ) is included, - 7 - `yAccelOrAccelDirection` - when the component yAcceleration of the component [**AccelerationCartesian**](#AccelerationCartesian) or the component AccelerationDirection of the component [**AccelerationPolarWithZ**](#AccelerationPolarWithZ) is included, - 8 - `zAcceleration` - when the component zAcceleration of the component [**AccelerationCartesian**](#AccelerationCartesian) or of the component [**AccelerationPolarWithZ**](#AccelerationPolarWithZ) is included, - 9 - `zAngle` - when the component zAngle is included, - 10 - `yAngle` - when the component yAngle is included, - 11 - `xAngle` - when the component xAngle is included, - 12 - `zAngleRate` - when the component zAngleRate is included. Otherwise, it shall be set to 0.     **Categories**: Sensing information     **Revision**: _Created in V2.1.1_ ```asn1 MatrixIncludedComponents::= BIT STRING{ xPosition (0), yPosition (1), zPosition (2), xVelocityOrVelocityMagnitude (3), yVelocityOrVelocityDirection (4), zSpeed (5), xAccelOrAccelMagnitude (6), yAccelOrAccelDirection (7), zAcceleration (8), zAngle (9), yAngle (10), xAngle (11), zAngleRate (12) } (SIZE(13,...)) ``` ### MessageId This DE represents the type of facility layer message. The value shall be set to: - 1 - `denm` - for Decentralized Environmental Notification Message (DENM) as specified in ETSI EN 302 637-3 [i.2], - 2 - `cam` - for Cooperative Awareness Message (CAM) as specified in ETSI EN 302 637-2 [i.1], - 3 - `poi` - for Point of Interest message as specified in ETSI TS 101 556-1 [i.9], - 4 - `spatem` - for Signal Phase And Timing Extended Message (SPATEM) as specified in ETSI TS 103 301 [i.15], - 5 - `mapem` - for MAP Extended Message (MAPEM) as specified in ETSI TS 103 301 [i.15], - 6 - `ivim` - for in Vehicle Information Message (IVIM) as specified in ETSI TS 103 301 [i.15], - 7 - `ev-rsr` - for Electric vehicle recharging spot reservation message, as defined in ETSI TS 101 556-3 [i.11], - 8 - `tistpgtransaction` - for messages for Tyre Information System (TIS) and Tyre Pressure Gauge (TPG) interoperability, as specified in ETSI TS 101 556-2 [i.10], - 9 - `srem` - for Signal Request Extended Message as specified in ETSI TS 103 301 [i.15], - 10 - `ssem` - for Signal request Status Extended Message as specified in ETSI TS 103 301 [i.15], - 11 - `evcsn` - for Electrical Vehicle Charging Spot Notification message as specified in ETSI TS 101 556-1 [i.9], - 12 - `saem` - for Services Announcement Extended Message as specified in ETSI EN 302 890-1 [i.17], - 13 - `rtcmem` - for Radio Technical Commission for Maritime Services Extended Message (RTCMEM) as specified in ETSI TS 103 301 [i.15], - 14 - `cpm` - reserved for Collective Perception Message (CPM), - 15 - `imzm` - for Interference Management Zone Message (IMZM) as specified in ETSI TS 103 724 [i.13], - 16 - `vam` - for Vulnerable Road User Awareness Message as specified in ETSI TS 130 300-3 [i.12], - 17 - `dsm` - reserved for Diagnosis, logging and Status Message, - 18 - `pcim` - reserved for Parking Control Infrastructure Message, - 19 - `pcvm` - reserved for Parking Control Vehicle Message, - 20 - `mcm` - reserved for Manoeuvre Coordination Message, - 21 - `pam` - reserved for Parking Availability Message, - 22-255 - reserved for future usage.     **Categories**: Communication information     **Revision**: _Created in V2.1.1 from @ref ItsPduHeader._ ```asn1 MessageId::= INTEGER { denm (1), cam (2), poi (3), spatem (4), mapem (5), ivim (6), ev-rsr (7), tistpgtransaction (8), srem (9), ssem (10), evcsn (11), saem (12), rtcmem (13), cpm (14), imzm (15), vam (16), dsm (17), pcim (18), pcvm (19), mcm (20), pam (21) } (0..255) ``` ### NumberOfOccupants This DE represents the number of occupants in a vehicle. The value shall be set to: - `n (n >= 0 and n < 126)` for the number n of occupants, - `126` for values equal to or higher than 125, - `127` if information is not available.     **Unit**: _1 person_     **Categories**: Vehicle information     **Revision**: _Editorial update in V2.1.1_ ```asn1 NumberOfOccupants ::= INTEGER { outOfRange (126), unavailable (127) } (0 .. 127) ``` ### ObjectPerceptionQuality This DE represents a single-value indication about the overall information quality of a perceived object. The value shall be set to: -`0` : if there is no confidence in detected object, e.g. for "ghost"-objects or if confidence could not be computed, - `n (n > 0 and n < 15)` : for the applicable confidence value, -`15` : if there is full confidence in the detected Object.     **Unit**: _n/a_     **Categories**: Sensing information     **Revision**: _Created in V2.1.1_ ```asn1 ObjectPerceptionQuality ::= INTEGER { noConfidence (0), fullConfidence (15) } (0..15) ``` ### ObjectDimensionValue This DE represents a single dimension of an object. The value shall be set to: - `n (n > 0 and n < 255)` if the accuracy is equal to or less than n x 0,1 m, and more than (n-1) x 0,1 m, - `255` if the accuracy is out of range i.e. greater than 25,4 m, - `256` if the data is unavailable.     **Unit**: _0,1 m_     **Categories**: Sensing information     **Revision**: _Created in V2.1.1_ ```asn1 ObjectDimensionValue ::= INTEGER { outOfRange (255), unavailable (256) }(1..256) ``` ### ObjectDimensionConfidence This DE indicates the object dimension confidence value which represents the estimated absolute accuracy of an object dimension value with a default confidence level of 95%. If required, the confidence level can be defined by the corresponding standards applying this DE. The value shall be set to: - `n (n > 0 and n < 31)` if the confidence value is equal to or less than n x 0,1 metre, and more than (n-1) x 0,1 metre, - `31` if the confidence value is out of range i.e. greater than 3,0 m, - `32` if the confidence value is unavailable.     **Unit**: _0,1 m_     **Categories**: Sensing information     **Revision**: _Created in V2.1.1_ ```asn1 ObjectDimensionConfidence ::= INTEGER { outOfRange (31), unavailable (32) } (1..32) ``` ### ObjectFace This DE indicates the face or part of a face of a solid object. The object is modelled as a rectangular prism that has a length that is greater than its width, with the faces of the object being defined as: - front: the face defined by the prism´s width and height, and which is the first face in direction of longitudinal movement of the object, - back: the face defined by the prism´s width and height, and which is the last face in direction of longitudinal movement of the object, - side: the faces defined by the prism´s length and height with "left" and "right" defined by looking at the front face and "front" and "back" defined w.r.t to the front and back faces. Note: It is permissible to derive the required object dimensions and orientation from models to provide a best guess.     **Categories**: Basic information     **Revision**: _V2.1.1_ ```asn1 ObjectFace ::= ENUMERATED { front (0), sideLeftFront (1), sideLeftBack (2), sideRightFront (3), sideRightBack (4), back (5) } ``` ### OpeningDaysHours This DE represents a time period to describe the opening days and hours of a Point of Interest. (for example local commerce).     **Categories**: Time information     **Revision**: _V1.3.1_ ```asn1 OpeningDaysHours ::= UTF8String ``` ### OrdinalNumber1B The DE represents an ordinal number that indicates the position of an element in a set.     **Categories**: Basic information     **Revision**: _Created in V2.1.1_ ```asn1 OrdinalNumber1B ::= INTEGER(0..255) ``` ### OrdinalNumber3b The DE represents an ordinal number that indicates the position of an element in a set.     **Categories**: Basic information     **Revision**: _Created in V2.1.1_ ```asn1 OrdinalNumber3b ::= INTEGER(1..8) ``` ### OtherSubClass This DE indicates the subclass of a detected object for [**ObjectClass**](#ObjectClass) "otherSubclass". The value shall be set to: - `0` - unknown - if the subclass is unknown. - `1` - roadSideUnit - if the object is a roadside unit. - `2` - singleObject - if the object is a single object. - `3` - multipleObjects - if the object is a group of multiple objects. - `4` - bulkMaterial - if the object is a bulk material.     **Categories**: Sensing information     **Revision**: _Created in V2.1.1_ ```asn1 OtherSubClass ::= INTEGER { unknown (0), roadSideUnit (1), singleObject (2), multipleObjects (3), bulkMaterial (4) } (0..255) ``` ### PathDeltaTime This DE represents the recorded or estimated travel time between a position and a predefined reference position.     **Unit**: _0,01 second_     **Categories**: GeoReference information     **Revision**: _V1.3.1_ ```asn1 PathDeltaTime ::= INTEGER (1..65535, ...) ``` ### PerformanceClass This DE denotes the ability of an ITS-S to provide up-to-date information. A performance class value is used to describe age of data. The exact values are out of scope of the present document. The value shall be set to: - `0` if the performance class is unknown, - `1` for performance class A as defined in ETSI TS 101 539-1 [i.5], - `2` for performance class B as defined in ETSI TS 101 539-1 [i.5], - Values in the range `3 to 7` are reserved for future use.     **Categories**: Vehicle information     **Revision**: _Editorial update in V2.1.1_ ```asn1 PerformanceClass ::= INTEGER { unavailable (0), performanceClassA (1), performanceClassB (2) } (0..7) ``` ### PhoneNumber This DE represents a telephone number     **Categories**: Basic information     **Revision**: _V1.3.1_ ```asn1 PhoneNumber ::= NumericString (SIZE(1..16)) ``` ### PosCentMass This DE indicates the perpendicular distance from the centre of mass of an empty load vehicle to the front line of the vehicle bounding box of the empty load vehicle. The value shall be set to: - `n (n > 0 and n < 62)` for any aplicable value n between 0,1 metre and 6,2 metres, - `62` for values equal to or higher than `6.1 metres`, - `63` if the information is unavailable.     **Unit**: _0,1 metre_     **Categories**: Vehicle information     **Revision**: _description revised in V2.1.1 (the meaning of 62 has changed slightly)_ >>> NOTE: The empty load vehicle is defined in ISO 1176 [i.8], clause 4.6. >>> ```asn1 PosCentMass ::= INTEGER { tenCentimetres (1), outOfRange (62), unavailable (63) } (1..63) ``` ### PositioningSolutionType This DE indicates the positioning technology being used to estimate a geographical position. The value shall be set to: - 0 `noPositioningSolution` : no positioning solution used, - 1 `sGNSS` : Global Navigation Satellite System used, - 2 `dGNSS` : Differential GNSS used, - 3 `sGNSSplusDR` : GNSS and dead reckoning used, - 4 `dGNSSplusDR` : Differential GNSS and dead reckoning used, - 5 `dR` : dead reckoning used.     **Categories**: GeoReference information     **Revision**: _V1.3.1_ ```asn1 PositioningSolutionType ::= ENUMERATED { noPositioningSolution (0), sGNSS (1), dGNSS (2), sGNSSplusDR (3), dGNSSplusDR (4), dR (5), ... } ``` ### PositionOfOccupants This DE indicates whether a passenger seat is occupied or whether the occupation status is detectable or not. The number of row in vehicle seats layout is counted in rows from the driver row backwards from front to the rear of the vehicle. The left side seat of a row refers to the left hand side seen from vehicle rear to front. Additionally, a bit is reserved for each seat row, to indicate if the seat occupation of a row is detectable or not, i.e. `row1NotDetectable (3)`, `row2NotDetectable(8)`, `row3NotDetectable(13)` and `row4NotDetectable(18)`. Finally, a bit is reserved for each row seat to indicate if the seat row is present or not in the vehicle, i.e. row1NotPresent `(4)`, row2NotPresent `(9)`, `row3NotPresent(14)`, `row4NotPresent(19)`. When a seat is detected to be occupied, the corresponding seat occupation bit shall be set to `1`. For example, when the row 1 left seat is occupied, `row1LeftOccupied(0)` bit shall be set to 1. When a seat is detected to be not occupied, the corresponding seat occupation bit shall be set to `0`. Otherwise, the value of seat occupation bit shall be set according to the following conditions: - If the seat occupation of a seat row is not detectable, the corresponding bit shall be set to `1`. When any seat row not detectable bit is set to `1`, all corresponding seat occupation bits of the same row shall be set to `1`. - If the seat row is not present, the corresponding not present bit of the same row shall be set to `1`. When any of the seat row not present bit is set to `1`, the corresponding not detectable bit for that row shall be set to `1`, and all the corresponding seat occupation bits in that row shall be set to `0`.     **Categories**: Vehicle information     **Revision**: _V1.3.1_ ```asn1 PositionOfOccupants ::= BIT STRING { row1LeftOccupied (0), row1RightOccupied (1), row1MidOccupied (2), row1NotDetectable (3), row1NotPresent (4), row2LeftOccupied (5), row2RightOccupied (6), row2MidOccupied (7), row2NotDetectable (8), row2NotPresent (9), row3LeftOccupied (10), row3RightOccupied (11), row3MidOccupied (12), row3NotDetectable (13), row3NotPresent (14), row4LeftOccupied (15), row4RightOccupied (16), row4MidOccupied (17), row4NotDetectable (18), row4NotPresent (19) } (SIZE(20)) ``` ### PosFrontAx This DE indicates the perpendicular distance between the vehicle front line of the bounding box and the front wheel axle in 0,1 metre. The value shall be set to: - `n (n > 0 and n < 19)` for any aplicable value between 0,1 metre and 1,9 metres, - `19` for values equal to or higher than 1.8 metres, - `20` if the information is unavailable.     **Unit**: _0,1 metre_     **Categories**: Vehicle information     **Revision**: _description revised in V2.1.1 (the meaning of 19 has changed slightly)_ ```asn1 PosFrontAx ::= INTEGER { outOfRange (19), unavailable(20) } (1..20) ``` ### PosLonCarr This DE represents the distance from the centre of vehicle front bumper to the right or left longitudinal carrier of vehicle. The left/right carrier refers to the left/right as seen from a passenger sitting in the vehicle. The value shall be set to: - `n (n > 0 and n < 126)` for any aplicable value between 0,01 metre and 1,26 metres, - `126` for values equal to or higher than 1.25 metres, - `127` if the information is unavailable.     **Unit**: _0,01 metre_     **Categories**: Vehicle information     **Revision**: _description revised in V2.1.1 (the meaning of 126 has changed slightly)_ ```asn1 PosLonCarr ::= INTEGER { outOfRange (126), unavailable (127) } (1..127) ``` ### PosPillar This DE represents the perpendicular inter-distance of neighbouring pillar axis of vehicle starting from the middle point of the front line of the vehicle bounding box. The value shall be set to: - `n (n > 0 and n < 29)` for any aplicable value between 0,1 metre and 2,9 metres, - `29` for values equal to or greater than 2.8 metres, - `30` if the information is unavailable.     **Unit**: _0,1 metre_     **Categories**: Vehicle information     **Revision**: _description revised in V2.1.1 (the meaning of 29 has changed slightly)_ ```asn1 PosPillar ::= INTEGER { outOfRange (29), unavailable (30) } (1..30) ``` ### PostCrashSubCauseCode This DE represents the value of the sub cause codes of the [**CauseCode**](#CauseCode) `postCrash` . The value shall be set to: - 0 `unavailable` : in case further detailed information on post crash event is unavailable, - 1 `accidentWithoutECallTriggered` : in case no eCall has been triggered for an accident, - 2 `accidentWithECallManuallyTriggered` : in case eCall has been manually triggered and transmitted to eCall back end, - 3 `accidentWithECallAutomaticallyTriggered` : in case eCall has been automatically triggered and transmitted to eCall back end, - 4 `accidentWithECallTriggeredWithoutAccessToCellularNetwork` : in case eCall has been triggered but cellular network is not accessible from triggering vehicle. - 5-255 : are reserved for future usage.     **Categories**: Traffic information     **Revision**: _V1.3.1_ ```asn1 PostCrashSubCauseCode ::= INTEGER { unavailable (0), accidentWithoutECallTriggered (1), accidentWithECallManuallyTriggered (2), accidentWithECallAutomaticallyTriggered (3), accidentWithECallTriggeredWithoutAccessToCellularNetwork (4) } (0..255) ``` ### PrecipitationIntensity This DE represent the total amount of rain falling during one hour. It is measured in mm per hour at an area of 1 square metre. The following values are specified: - `n (n > 0 and n < 2000)` if the amount of rain falling is equal to or less than n x 0,1 mm/h and greater than (n-1) x 0,1 mm/h, - `2000` if the amount of rain falling is greater than 199.9 mm/h, - `2001` if the information is not available.     **Unit**: _0,1 mm/h_     **Categories**: Basic Information     **Revision**: _created in V2.1.1_ ```asn1 PrecipitationIntensity ::= INTEGER { outOfRange (2000), unavailable (2001) } (1..2001) ``` ### ProtectedZoneId This DE represents the indentifier of a protected communication zone.     **Categories**: Infrastructure information Communication information     **Revision**: _Revision in V2.1.1 (changed name from ProtectedZoneID to ProtectedZoneId)_ ```asn1 ProtectedZoneId ::= INTEGER (0.. 134217727) ``` ### ProtectedZoneRadius This DE represents the radius of a protected communication zone.     **Unit**: _metre_     **Categories**: Infrastructure information Communication information     **Revision**: _V1.3.1_ ```asn1 ProtectedZoneRadius ::= INTEGER (1..255,...) ``` ### ProtectedZoneType This DE indicates the type of a protected communication zone, so that an ITS-S is aware of the actions to do while passing by such zone (e.g. reduce the transmit power in case of a DSRC tolling station). The protected zone type is defined in ETSI TS 102 792 [i.14].     **Categories**: Communication information     **Revision**: _V1.3.1_ ```asn1 ProtectedZoneType::= ENUMERATED { permanentCenDsrcTolling (0), ..., temporaryCenDsrcTolling (1) } ``` ### PtActivationData This DE is used for various tasks in the public transportation environment, especially for controlling traffic signal systems to prioritize and speed up public transportation in urban area (e.g. intersection "_bottlenecks_"). The traffic lights may be controlled by an approaching bus or tram automatically. This permits "_In Time_" activation of the green phase, will enable the individual traffic to clear a potential traffic jam in advance. Thereby the approaching bus or tram may pass an intersection with activated green light without slowing down the speed due to traffic congestion. Other usage of the DE is the provision of information like the public transport line number or the schedule delay of a public transport vehicle.     **Categories**: Vehicle information     **Revision**: _V1.3.1_ ```asn1 PtActivationData ::= OCTET STRING (SIZE(1..20)) ``` ### PtActivationType This DE indicates a certain coding type of the PtActivationData data. The folowing value are specified: - `0` undefinedCodingType : undefined coding type, - `1` r09-16CodingType : coding of PtActivationData conform to VDV recommendation 420 [i.7], - `2` vdv-50149CodingType : coding of PtActivationData based on VDV recommendation 420 [i.7]. - values 3 to 255 : reserved for alternative and future use.     **Categories**: Vehicle information     **Revision**: _V1.3.1_ ```asn1 PtActivationType ::= INTEGER { undefinedCodingType (0), r09-16CodingType (1), vdv-50149CodingType (2) } (0..255) ``` ### RailwayLevelCrossingSubCauseCode This DE represents the value of the sub cause codes of the [**CauseCode**](#CauseCode) `railwayLevelCrossing` . The value shall be set to: - 0 `unavailable` : in case no further detailed information on the railway level crossing status is available, - 1 `doNotCrossAbnormalSituation` : in case when something wrong is detected by equation or sensors of the railway level crossing, including level crossing is closed for too long (e.g. more than 10 minutes long ; default value), - 2 `closed` : in case the crossing is closed (barriers down), - 3 `unguarded` : in case the level crossing is unguarded (i.e a Saint Andrew cross level crossing without detection of train), - 4 `nominal` : in case the barriers are up and lights are off. - 5-255: reserved for future usage.     **Categories**: Traffic information     **Revision**: _V1.3.1_ ```asn1 RailwayLevelCrossingSubCauseCode ::= INTEGER { unavailable (0), doNotCrossAbnormalSituation (1), closed (2), unguarded (3), nominal (4) } (0..255) ``` ### RelevanceDistance This DE describes a distance of relevance for information indicated in a message. The value shall be set to: - 0 `lessThan50m` : for distances below 50 m, - 1 `lessThan100m` : for distances below 100 m, - 2 `lessThan200m` : for distances below 200 m, - 3 `lessThan500m` : for distances below 300 m, - 4 `lessThan1000m` : for distances below 1 000 m, - 5 `lessThan5km` : for distances below 5 000 m, - 6 `lessThan10km` : for distances below 10 000 m, - 7 `over10km` : for distances over 10 000 m.     **Categories**: GeoReference information     **Revision**: _Editorial update in V2.1.1_ >>> NOTE: this DE is kept for backwards compatibility reasons only. It is recommended to use the [**StandardLength3b**](#StandardLength3b) instead. >>> ```asn1 RelevanceDistance ::= ENUMERATED { lessThan50m(0), lessThan100m(1), lessThan200m(2), lessThan500m(3), lessThan1000m(4), lessThan5km(5), lessThan10km(6), over10km(7) } ``` ### RelevanceTrafficDirection This DE indicates a traffic direction that is relevant to information indicated in a message. The value shall be set to: - 0 `allTrafficDirections` : for all traffic directions, - 1 `upstreamTraffic` : for upstream traffic, - 2 `downstreamTraffic` : for downstream traffic, - 3 `oppositeTraffic` : for traffic in the opposite direction. The terms `upstream`, `downstream` and `oppositeTraffic` are relative to the event position.     **Categories**: GeoReference information     **Revision**: _Editorial update in V2.1.1_ >>> NOTE: this DE is kept for backwards compatibility reasons only. It is recommended to use the [**TrafficDirection**](#TrafficDirection) instead. >>> ```asn1 RelevanceTrafficDirection ::= ENUMERATED { allTrafficDirections(0), upstreamTraffic(1), downstreamTraffic(2), oppositeTraffic(3) } ``` ### RequestResponseIndication This DE indicates whether an ITS message is transmitted as request from ITS-S or a response transmitted from ITS-S after receiving request from other ITS-Ss. The value shall be set to: - 0 `request` : for a request message, - 1 `response` : for a response message.     **Categories**: Communication information     **Revision**: _Editorial update in V2.1.1_ ```asn1 RequestResponseIndication ::= ENUMERATED { request (0), response (1) } ``` ### RescueAndRecoveryWorkInProgressSubCauseCode This DE represents the value of the sub cause codes of the [**CauseCode**](#CauseCode) `rescueAndRecoveryWorkInProgress` The value shall be set to: - 0 `unavailable` : in case further detailed information on rescue and recovery work is unavailable, - 1 `emergencyVehicles` : in case rescue work is ongoing by emergency vehicles, - 2 `rescueHelicopterLanding` : in case rescue helicopter is landing, - 3 `policeActivityOngoing` : in case police activity is ongoing, - 4 `medicalEmergencyOngoing` : in case medical emergency recovery is ongoing, - 5 `childAbductionInProgress`: in case a child kidnapping alarm is activated and rescue work is ongoing, - 6-255: reserved for future usage.     **Categories**: Traffic information     **Revision**: _V1.3.1_ ```asn1 RescueAndRecoveryWorkInProgressSubCauseCode ::= INTEGER { unavailable (0), emergencyVehicles (1), rescueHelicopterLanding (2), policeActivityOngoing (3), medicalEmergencyOngoing (4), childAbductionInProgress (5) } (0..255) ``` ### RoadType This DE indicates the type of a road segment. The value shall be set to: - 0 `urban-NoStructuralSeparationToOppositeLanes` : for an urban road with no structural separation between lanes carrying traffic in opposite directions, - 1 `urban-WithStructuralSeparationToOppositeLanes` : for an urban road with structural separation between lanes carrying traffic in opposite directions, - 2 `nonUrban-NoStructuralSeparationToOppositeLanes` : for an non urban road with no structural separation between lanes carrying traffic in opposite directions, - 3 `nonUrban-WithStructuralSeparationToOppositeLanes` : for an non urban road with structural separation between lanes carrying traffic in opposite directions.     **Categories**: Road Topology Information     **Revision**: _Editorial update in V2.1.1_ ```asn1 RoadType ::= ENUMERATED { urban-NoStructuralSeparationToOppositeLanes (0), urban-WithStructuralSeparationToOppositeLanes (1), nonUrban-NoStructuralSeparationToOppositeLanes (2), nonUrban-WithStructuralSeparationToOppositeLanes (3) } ``` ### RoadworksSubCauseCode This DE represents the value of the sub cause codes of the [**CauseCode**](#CauseCode) `roadworks`. The value shall be set to: - 0 `unavailable` : in case further detailed information on roadworks is unavailable, - 1 `majorRoadworks` : in case a major roadworks is ongoing, - 2 `roadMarkingWork` : in case a road marking work is ongoing, - 3 `slowMovingRoadMaintenance` : in case slow moving road maintenance work is ongoing, - 4 `shortTermStationaryRoadworks`: in case a short term stationary roadwork is ongoing, - 5 `streetCleaning` : in case a vehicle street cleaning work is ongoing, - 6 `winterService` : in case winter service work is ongoing. - 7-255 : are reserved for future usage.     **Categories**: Traffic information     **Revision**: _V1.3.1_ ```asn1 RoadworksSubCauseCode ::= INTEGER { unavailable (0), majorRoadworks (1), roadMarkingWork (2), slowMovingRoadMaintenance (3), shortTermStationaryRoadworks (4), streetCleaning (5), winterService (6) } (0..255) ``` ### SafeDistanceIndicator This DE indicates if a distance is safe. The value shall be set to: - `FALSE` if the triple {LaD, LoD, VD} < {MSLaD, MSLoD, MSVD} is simultaneously satisfied with confidence level of 90 % or more, - `TRUE` otherwise.     **Categories**: Traffic information Kinematics information     **Revision**: _created in V2.1.1_ >>> NOTE: the abbreviations used are Lateral Distance (LaD), Longitudinal Distance (LoD) and Vertical Distance (VD) and their respective thresholds, Minimum Safe Lateral Distance (MSLaD), Minimum Safe Longitudinal Distance (MSLoD), and Minimum Safe Vertical Distance (MSVD) >>> ```asn1 SafeDistanceIndicator::= BOOLEAN ``` ### SemiAxisLength This DE indicates the horizontal position confidence value which represents the estimated absolute position accuracy, in one of the axis direction as defined in a shape of ellipse with a confidence level of 95 %. The value shall be set to: - `n (n > 0 and n < 4 094)` if the accuracy is equal to or less than n * 0,01 metre, - `4 094` if the accuracy is out of range, i.e. greater than 4,093 m, - `4 095` if the accuracy information is unavailable. The value 0 shall not be used.     **Unit**: _0,01 metre_     **Categories**: GeoReference Information     **Revision**: _Description revised in V2.1.1_ >>> NOTE: The fact that a position coordinate value is received with confidence value set to 'unavailable(4095)' can be caused by several reasons, such as: - the sensor cannot deliver the accuracy at the defined confidence level because it is a low-end sensor, - the sensor cannot calculate the accuracy due to lack of variables, or - there has been a vehicle bus (e.g. CAN bus) error. In all 3 cases above, the position coordinate value may be valid and used by the application. If a position coordinate value is received and its confidence value is set to 'outOfRange(4094)', it means that the position coordinate value is not valid and therefore cannot be trusted. Such value is not useful for the application. >>> ```asn1 SemiAxisLength ::= INTEGER{ doNotUse (0), outOfRange (4094), unavailable (4095) } (0..4095) ``` ### SensorType This DE indicates the type of sensor. The value shall be set to: - `0` undefined : in case the sensor type is undefined. - `1` radar : in case the sensor is a radar, - `2` lidar : in case the sensor is a lidar, - `3` monovideo : in case the sensor is mono video, - `4` stereovision : in case the sensor is stereo vision, - `5` nightvision : in case the sensor is night vision, - `6` ultrasonic : in case the sensor is ultrasonic, - `7` pmd : in case the sensor is photonic mixing device, - `8` inductionLoop : in case the sensor is an induction loop, - `9` sphericalCamera : in case the sensor is a spherical camera, - `10` uwb : in case the sensor is ultra wide band, - `11` acoustic : in case the sensor is acoustic, - `12` localAggregation : in case the information is provided by a system that aggregates information from different local sensors. Aggregation may include fusion, - `13` itsAggregation : in case the information is provided by a system that aggregates information from other received ITS messages. - 14-31 : are reserved for future usage.     **Categories**: Sensing Information     **Revision**: _created in V2.1.1_ ```asn1 SensorType ::= INTEGER { undefined (0), radar (1), lidar (2), monovideo (3), stereovision (4), nightvision (5), ultrasonic (6), pmd (7), inductionLoop (8), sphericalCamera (9), uwb (10), acoustic (11), localAggregation (12), itsAggregation (13) } (0..31) ``` ### SequenceNumber This DE represents a sequence number.     **Categories**: Basic information     **Revision**: _V1.3.1_ ```asn1 SequenceNumber ::= INTEGER (0..65535) ``` ### SignalViolationSubCauseCode This DE represents the value of the sub cause codes of the [**CauseCode**](#CauseCode) `signalViolation`. The value shall be set to: - 0 `unavailable` : in case further detailed information on signal violation event is unavailable, - 1 `stopSignViolation` : in case a stop sign violation is detected, - 2 `trafficLightViolation` : in case a traffic light violation is detected, - 3 `turningRegulationViolation`: in case a turning regulation violation is detected. - 4-255 : are reserved for future usage.     **Categories**: Traffic information     **Revision**: _V1.3.1_ ```asn1 SignalViolationSubCauseCode ::= INTEGER { unavailable (0), stopSignViolation (1), trafficLightViolation (2), turningRegulationViolation (3) } (0..255) ``` ### SlowVehicleSubCauseCode This DE represents the sub cause codes of the [**CauseCode**](#CauseCode) "slowVehicle". The value shall be set to: - 0 `unavailable` : in case further detailed information on slow vehicle driving event is unavailable, - 1 `maintenanceVehicle` : in case of a slow driving maintenance vehicle on the road, - 2 `vehiclesSlowingToLookAtAccident`: in case vehicle is temporally slowing down to look at accident, spot, etc., - 3 `abnormalLoad` : in case an abnormal loaded vehicle is driving slowly on the road, - 4 `abnormalWideLoad` : in case an abnormal wide load vehicle is driving slowly on the road, - 5 `convoy` : in case of slow driving convoy on the road, - 6 `snowplough` : in case of slow driving snow plough on the road, - 7 `deicing` : in case of slow driving de-icing vehicle on the road, - 8 `saltingVehicles` : in case of slow driving salting vehicle on the road. - 9-255 : are reserved for future usage.     **Categories**: Traffic information     **Revision**: _V1.3.1_ ```asn1 SlowVehicleSubCauseCode ::= INTEGER { unavailable (0), maintenanceVehicle (1), vehiclesSlowingToLookAtAccident (2), abnormalLoad (3), abnormalWideLoad (4), convoy (5), snowplough (6), deicing (7), saltingVehicles (8) } (0..255) ``` ### SpecialTransportType The DE indicates if a vehicle is carrying goods in the special transport conditions. The corresponding bit shall be set to 1 under the following conditions: - 0 `heavyLoad` : the vehicle is carrying goods with heavy load, - 1 `excessWidth` : the vehicle is carrying goods in excess of width, - 2 `excessLength` : the vehicle is carrying goods in excess of length, - 3 `excessHeight` : the vehicle is carrying goods in excess of height. Otherwise, the corresponding bit shall be set to 0.     **Categories**: Vehicle information     **Revision**: _Description revised in V2.1.1_ ```asn1 SpecialTransportType ::= BIT STRING { heavyLoad (0), excessWidth (1), excessLength (2), excessHeight (3) } (SIZE(4)) ``` ### SpeedConfidence This DE indicates the speed confidence value which represents the estimated absolute accuracy of a speed value with a default confidence level of 95%. If required, the confidence level can be defined by the corresponding standards applying this DE. The value shall be set to: - `n (n > 0 and n < 126)` if the confidence value is equal to or less than n * 0,01 m/s. - `126` if the confidence value is out of range, i.e. greater than 1,25 m/s, - `127` if the confidence value information is not available.     **Unit**: _0,01 m/s_     **Categories**: Vehicle information     **Revision**: _Description revised in V2.1.1_ >>> NOTE: If a speed value is received and its confidence value is set to `outOfRange(126)`, it means that the speed value is not valid and therefore cannot be trusted. Such is not useful for the application. >>> ```asn1 SpeedConfidence ::= INTEGER { outOfRange (126), unavailable (127) } (1..127) ``` ### SpeedLimit This DE represents a speed limitation applied to a geographical position, a road section or a geographical region.     **Unit**: _km/h_     **Categories**: Infrastructure information Traffic information     **Revision**: _V1.3.1_ ```asn1 SpeedLimit ::= INTEGER (1..255) ``` ### SpeedValue This DE represents a speed value, i.e. the magnitude of the velocity-vector. The value shall be set to: - `0` in a standstill situation. - `n (n > 0 and n < 16 382)` if the applicable value is equal to or less than n x 0,01 m/s, and greater than (n-1) x 0,01 m/s, - `16 382` for speed values greater than 163,81 m/s, - `16 383` if the speed accuracy information is not available.     **Unit**: _0,01 m/s_     **Categories**: Kinematics information     **Revision**: _Description revised in V2.1.1 (the meaning of 16382 has changed slightly)_ >>> NOTE: the the definition of standstill is out of scope of this document. >>> ```asn1 SpeedValue ::= INTEGER { standstill (0), outOfRange (16382), unavailable (16383) } (0..16383) ``` ### VelocityComponentValue This DE represents the value of a velocity component in a defined coordinate system. The value shall be set to: - `-16 383` if the velocity is equal to or smaller than -163,83 m/s, - `n (n > -16 383 and n < 16 382)` if the applicable value is equal to or less than n x 0,01 m/s, and greater than `(n-1) x 0,01 m/s, - `16 382` for velocity values equal to or greater than 163,81 m/s, - `16 383` if the velocity information is not available.     **Unit**: _0,01 m/s_     **Categories**: Kinematics information     **Revision**: _Created in V2.1.1_ ```asn1 VelocityComponentValue ::= INTEGER { negativeOutOfRange (-16383), psotiveOutOfRange (16382), unavailable (16383) } (-16383..16383) ``` ### StabilityLossProbability This DE indicates the estimated probability of a stability level and conversely also the probability of a stability loss. The value shall be set to: - `0` to indicate an estimated probability of a loss of stability of 0%, i.e. "stable", - `n (n > 0 and n < 50)` to indicate the actual stability level, - `50` to indicate a estimated probability of a loss of stability of 100%, i.e. "total loss of stability", - the values between 51 and 62 are reserved for future use, - `63`: this value indicates that the information is unavailable.     **Unit**: _2%_     **Categories**: Kinematics information     **Revision**: _Created in V2.1.1_ ```asn1 StabilityLossProbability ::= INTEGER { stable (0), totalLossOfStability (50), unavailable (63) } (0..63) ``` ### StandardLength12b The DE represents length as a measure of distance between points or as a dimension of an object or shape.     **Unit**: _0,1 metre_     **Categories**: Basic information     **Revision**: _Created in V2.1.1_ ```asn1 StandardLength12b::= INTEGER (0..4095) ``` ### StandardLength3b The DE represents length as a measure of distance between points. The value shall be set to: - 0 `lessThan50m` : for distances below 50 m, - 1 `lessThan100m` : for distances below 100 m, - 2 `lessThan200m` : for distances below 200 m, - 3 `lessThan500m` : for distances below 300 m, - 4 `lessThan1000m` : for distances below 1 000 m, - 5 `lessThan5km` : for distances below 5 000 m, - 6 `lessThan10km` : for distances below 10 000 m, - 7 `over10km` : for distances over 10 000 m.     **Categories**: GeoReference information     **Revision**: _Created in V2.1.1 from RelevanceDistance_ ```asn1 StandardLength3b ::= ENUMERATED { lessThan50m (0), lessThan100m (1), lessThan200m (2), lessThan500m (3), lessThan1000m (4), lessThan5km (5), lessThan10km (6), over10km (7) } ``` ### StandardLength9b The DE represents length as a measure of distance between points or as a dimension of an object.     **Unit**: _0,1 metre_     **Categories**: Basic information     **Revision**: _Created in V2.1.1_ ```asn1 StandardLength9b::= INTEGER (0..511) ``` ### StandardLength1B The DE represents length as a measure of distance between points or as a dimension of an object.     **Unit**: _0,1 metre_     **Categories**: Basic information     **Revision**: _Created in V2.1.1_ ```asn1 StandardLength1B::= INTEGER (0..255) ``` ### StandardLength2B The DE represents length as a measure of distance between points or as a dimension of an object.     **Unit**: _0,1 metre_     **Categories**: Basic information     **Revision**: _Created in V2.1.1_ ```asn1 StandardLength2B::= INTEGER (0..65535) ``` ### StationarySince This DE indicates the duration in minutes since which something is stationary. The value shall be set to: - 0 `lessThan1Minute` : for being stationary since less than 1 minute, - 1 `lessThan2Minutes` : for being stationary since less than 2 minute and for equal to or more than 1 minute, - 2 `lessThan15Minutes` : for being stationary since less than 15 minutes and for equal to or more than 1 minute, - 3 `equalOrGreater15Minutes` : for being stationary since equal to or more than 15 minutes.     **Categories**: Kinematics information     **Revision**: _Created in V2.1.1_ ```asn1 StationarySince ::= ENUMERATED { lessThan1Minute (0), lessThan2Minutes (1), lessThan15Minutes (2), equalOrGreater15Minutes (3) } ``` ### StationaryVehicleSubCauseCode This DE provides the value of the sub cause codes of the [**CauseCode**](#CauseCode) "stationaryVehicle". The value shall be set to: - 0 `unavailable` : in case further detailed information on stationary vehicle is unavailable, - 1 `humanProblem` : in case stationary vehicle is due to health problem of driver or passenger, - 2 `vehicleBreakdown` : in case stationary vehicle is due to vehicle break down, - 3 `postCrash` : in case stationary vehicle is caused by collision, - 4 `publicTransportStop` : in case public transport vehicle is stationary at bus stop, - 5 `carryingDangerousGoods`: in case the stationary vehicle is carrying dangerous goods, - 6 `vehicleOnFire` : in case of vehicle on fire. - 7-255 reserved for future usage.     **Categories**: Traffic information     **Revision**: _V1.3.1_ ```asn1 StationaryVehicleSubCauseCode ::= INTEGER { unavailable (0), humanProblem (1), vehicleBreakdown (2), postCrash (3), publicTransportStop (4), carryingDangerousGoods (5), vehicleOnFire (6) } (0..255) ``` ### StationId This DE represents the identifier of an ITS-S. The ITS-S ID may be a pseudonym. It may change over space and/or over time.     **Categories**: Basic information     **Revision**: _Created in V2.1.1 based on @ref StationID_ ```asn1 StationId ::= INTEGER(0..4294967295) ``` ### StationID This DE represents the identifier of an ITS-S. The ITS-S ID may be a pseudonym. It may change over space and/or over time.     **Categories**: Basic information     **Revision**: _V1.3.1_ >>> NOTE: this DE is kept for backwards compatibility reasons only. It is recommended to use the [**StationId**](#StationId) instead. >>> ```asn1 StationID ::= INTEGER(0..4294967295) ``` ### StationType This DE represents the type of technical context the ITS-S is integrated in. The station type depends on the integration environment of ITS-S into vehicle, mobile devices or at infrastructure. The value shall be set to: - 0 `unknown` : information about the ITS-S context is not provided, - 1 `pedestrian` : ITS-S carried by human being not using a mechanical device for their trip (VRU profile 1), - 2 `cyclist` : ITS-S mounted on non-motorized unicycles, bicycles , tricycles, quadracycles (VRU profile 2), - 3 `moped` : ITS-S mounted on light motor vehicles with less than four wheels as defined in UNECE/TRANS/WP.29/78/Rev.4 [i.16] class L1, L2 (VRU Profile 3), - 4 `motorcycles` : ITS-S mounted on motor vehicles with less than four wheels as defined in UNECE/TRANS/WP.29/78/Rev.4 [i.16] class L3, L4, L5, L6, L7 (VRU Profile 3), - 5 `passengerCar` : ITS-S mounted on small passenger vehicles as defined in UNECE/TRANS/WP.29/78/Rev.4 [i.16] class M1, - 6 `bus` : ITS-S mounted on large passenger vehicles as defined in UNECE/TRANS/WP.29/78/Rev.4 [i.16] class M2, M3, - 7 `lightTruck` : ITS-S mounted on light Goods Vehicles as defined in UNECE/TRANS/WP.29/78/Rev.4 [i.16] class N1, - 8 `heavyTruck` : ITS-S mounted on Heavy Goods Vehicles as defined in UNECE/TRANS/WP.29/78/Rev.4 [i.16] class N2 and N3, - 9 `trailer` : ITS-S mounted on an unpowered vehicle that is intended to be towed by a powered vehicle as defined in UNECE/TRANS/WP.29/78/Rev.4 [i.16] class O, - 10 `specialVehicles` : ITS-S mounted on vehicles which have special purposes other than the above (e.g. moving road works vehicle), - 11 `tram` : ITS-S mounted on a vehicle which runs on tracks along public streets, - 12 `lightVruVehicle` : ITS-S carried by a human being traveling on light vehicle , incl. possible use of roller skates or skateboards (VRU profile 2), - 13 `animal` : ITS-S carried by an animal presenting a safety risk to other road users e.g. domesticated dog in a city or horse (VRU Profile 4), - 14 : reserved for future usage, - 15 `roadSideUnit` : ITS-S mounted on an infrastructure typically positioned outside of the drivable roadway (e.g. on a gantry, on a pole, on a stationary road works trailer); the infrastructure is static during the entire operation period of the ITS-S (e.g. no stop and go activity), - 16-255 : are reserved for future usage.     **Categories**: Communication information.     **Revision**: _revised in V2.1.1 (named values 12 and 13 added and note to value 9 deleted)_ >>> NOTE: this DE is kept for backwards compatibility reasons only. It is recommended to use the [**TrafficParticipantType**](#TrafficParticipantType) instead. >>> ```asn1 StationType ::= INTEGER { unknown (0), pedestrian (1), cyclist (2), moped (3), motorcycle (4), passengerCar (5), bus (6), lightTruck (7), heavyTruck (8), trailer (9), specialVehicle (10), tram (11), lightVruVehicle (12), animal (13), roadSideUnit (15) } (0..255) ``` ### SteeringWheelAngleConfidence This DE indicates the steering wheel angle confidence value which represents the estimated absolute accuracy for a steering wheel angle value with a confidence level of 95 %. The value shall be set to: - `n (n > 0 and n < 126)` if the confidence value is equal to or less than n x 1,5 degrees, - `126` if the confidence value is out of range, i.e. greater than 187,5 degrees, - `127` if the confidence value is not available. If a steering wheel angle value is received and its confidence value is set to 'outOfRange(126)', it means that the steering wheel angle value is not valid and therefore cannot be trusted. Such value is not useful for the application.     **Unit**: _1,5 degree_     **Categories**: Vehicle Information     **Revision**: _Description revised in V2.1.1_ >>> NOTE: The fact that a steering wheel angle value is received with confidence value set to 'unavailable(127)' can be caused by several reasons, such as: - the sensor cannot deliver the accuracy at the defined confidence level because it is a low-end sensor, - the sensor cannot calculate the accuracy due to lack of variables, or - there has been a vehicle bus (e.g. CAN bus) error. In all 3 cases above, the steering wheel angle value may be valid and used by the application. >>> ```asn1 SteeringWheelAngleConfidence ::= INTEGER { outOfRange (126), unavailable (127) } (1..127) ``` ### SteeringWheelAngleValue This DE represents the steering wheel angle of the vehicle at certain point in time. The value shall be provided in the vehicle coordinate system as defined in ISO 8855 [2], clause 2.11. The value shall be set to: - `-511` if the steering wheel angle is equal to or greater than 511 x 1,5 degrees = 766,5 degrees to the right, - `n (n > -511 and n <= 0)` if the steering wheel angle is equal to or less than n x 1,5 degrees, and greater than (n-1) x 1,5 degrees, turning clockwise (i.e. to the right), - `n (n > 1 and n < 511)` if the steering wheel angle is equal to or less than n x 0,1 degrees, and greater than (n-1) x 0,1 degrees, turning counter-clockwise (i.e. to the left), - `511` if the steering wheel angle is greater than 510 x 1,5 degrees = 765 degrees to the left, - `512` if information is not available.     **Unit**: _1,5 degree_     **Revision**: _Description revised in V2.1.1 (meaning of value 511 has changed slightly)._ ```asn1 SteeringWheelAngleValue ::= INTEGER { negativeOutOfRange (-511), positiveOutOfRange (511), unavailable (512) } (-511..512) ``` ### SubCauseCodeType This DE indicates the generic sub cause of a detected event.     **Categories**: Traffic information     **Revision**: _Description revised in V2.1.1 (this is the generic sub cause type)_ >>> NOTE: The sub cause code value assignment varies based on value of [**CauseCode**](#CauseCode) >>> ```asn1 SubCauseCodeType ::= INTEGER (0..255) ``` ### Temperature This DE indicates a temperature value. The value shall be set to: - `-60` for temperature equal to or less than -60 degrees C, - `n (n > -60 and n < 67)` for the actual temperature n in degrees C, - `67` for temperature equal to or greater than 67 degrees C.     **Unit**: _degrees Celsius_     **Categories**: Basic information     **Revision**: _Editorial update in V2.1.1_ ```asn1 Temperature ::= INTEGER { equalOrSmallerThanMinus60Deg (-60), equalOrGreaterThan67Deg(67)} (-60..67) ``` ### TimestampIts This DE represents the number of elapsed (TAI) milliseconds since the ITS Epoch. The ITS epoch is `00:00:00.000 UTC, 1 January 2004`. "Elapsed" means that the true number of milliseconds is continuously counted without interruption, i.e. it is not altered by leap seconds, which occur in UTC. EXAMPLE: The value for TimestampIts for 1 January 2007 00:00:00.000 UTC is `94 694 401 000` milliseconds, which includes one leap second insertion since the ITS epoch.     **Unit**: _0,001 s_     **Categories**: Basic information     **Revision**: _Description revised in in V2.1.1_ >>> NOTE: International Atomic Time (TAI) is the time reference coordinate on the basis of the readings of atomic clocks, operated in accordance with the definition of the second, the unit of time of the International System of Units. TAI is a continuous time scale. UTC has discontinuities, as it is occasionally adjusted by leap seconds. As of 1 January, 2022, TimestampIts is 5 seconds ahead of UTC, because since the ITS epoch on 1 January 2004 00:00:00.000 UTC, further 5 leap seconds have been inserted in UTC. >>> ```asn1 TimestampIts ::= INTEGER (0..4398046511103) ``` ### TrafficConditionSubCauseCode This DE represents the value of the sub cause codes of the [**CauseCode**](#CauseCode) `trafficCondition`. The value shall be set to: - 0 `unavailable` : in case further detailed information on traffic jam is unavailable, - 1 `increasedVolumeOfTraffic` : in case detected jam volume is increased, - 2 `trafficJamSlowlyIncreasing` : in case detected traffic jam volume is increasing slowly, - 3 `trafficJamIncreasing` : in case traffic jam volume is increasing, - 4 `trafficJamStronglyIncreasing`: in case traffic jam volume is strongly increasing, - 5 `trafficStationary` : in case traffic is stationary, - 6 `trafficJamSlightlyDecreasing`: in case traffic jam volume is decreasing slowly, - 7 `trafficJamDecreasing` : in case traffic jam volume is decreasing, - 8 `trafficJamStronglyDecreasing`: in case traffic jam volume is decreasing rapidly, - 9-255: reserved for future usage.     **Categories**: Traffic information     **Revision**: _V1.3.1_ ```asn1 TrafficConditionSubCauseCode ::= INTEGER { unavailable (0), increasedVolumeOfTraffic (1), trafficJamSlowlyIncreasing (2), trafficJamIncreasing (3), trafficJamStronglyIncreasing (4), trafficStationary (5), trafficJamSlightlyDecreasing (6), trafficJamDecreasing (7), trafficJamStronglyDecreasing (8) } (0..255) ``` ### TrafficDirection This DE indicates a traffic direction that is relevant to information indicated in a message. The value shall be set to: - 0 `allTrafficDirections` : for all traffic directions, - 1 `upstreamTraffic` : for upstream traffic, - 2 `downstreamTraffic` : for downstream traffic, - 3 `oppositeTraffic` : for traffic in the opposite direction. The terms `upstream`, `downstream` and `oppositeTraffic` are relative to the event position.     **Categories**: GeoReference information     **Revision**: _Created in V2.1.1 from RelevanceTrafficDirection_ >>> NOTE: Upstream traffic corresponds to the incoming traffic towards the event position, and downstream traffic to the departing traffic away from the event position. >>> ```asn1 TrafficDirection ::= ENUMERATED { allTrafficDirections (0), upstreamTraffic (1), downstreamTraffic (2), oppositeTraffic (3) } ``` ### TrafficParticipantType This DE represents the type of a traffic participant. The value shall be set to: - 0 `unknown` : information about traffic participant is not provided, - 1 `pedestrian` : human being not using a mechanical device for their trip (VRU profile 1), - 2 `cyclist` : non-motorized unicycles, bicycles , tricycles, quadracycles (VRU profile 2), - 3 `moped` : Ilight motor vehicles with less than four wheels as defined in UNECE/TRANS/WP.29/78/Rev.4 [i.16] class L1, L2 (VRU Profile 3), - 4 `motorcycles` : motor vehicles with less than four wheels as defined in UNECE/TRANS/WP.29/78/Rev.4 [i.16] class L3, L4, L5, L6, L7 (VRU Profile 3), - 5 `passengerCar` : small passenger vehicles as defined in UNECE/TRANS/WP.29/78/Rev.4 [i.16] class M1, - 6 `bus` : large passenger vehicles as defined in UNECE/TRANS/WP.29/78/Rev.4 [i.16] class M2, M3, - 7 `lightTruck` : light Goods Vehicles as defined in UNECE/TRANS/WP.29/78/Rev.4 [i.16] class N1, - 8 `heavyTruck` : Heavy Goods Vehicles as defined in UNECE/TRANS/WP.29/78/Rev.4 [i.16] class N2 and N3, - 9 `trailer` : unpowered vehicle that is intended to be towed by a powered vehicle as defined in UNECE/TRANS/WP.29/78/Rev.4 [i.16] class O, - 10 `specialVehicles` : vehicles which have special purposes other than the above (e.g. moving road works vehicle), - 11 `tram` : vehicle which runs on tracks along public streets, - 12 `lightVruVehicle` : human being traveling on light vehicle, incl. possible use of roller skates or skateboards (VRU profile 2), - 13 `animal` : animal presenting a safety risk to other road users e.g. domesticated dog in a city or horse (VRU Profile 4), - 14 `agricultural` : agricultural and forestry vehicles as defined in UNECE/TRANS/WP.29/78/Rev.4 [i.16] class T, - 15 `roadSideUnit` : infrastructure typically positioned outside of the drivable roadway (e.g. on a gantry, on a pole, on a stationary road works trailer); the infrastructure is static during the entire operation period of the ITS-S (e.g. no stop and go activity), - 16-255 : are reserved for future usage.     **Categories**: Communication information.     **Revision**: _Created in V2.1.1 based on StationType_ ```asn1 TrafficParticipantType ::= INTEGER { unknown (0), pedestrian (1), cyclist (2), moped (3), motorcycle (4), passengerCar (5), bus (6), lightTruck (7), heavyTruck (8), trailer (9), specialVehicle (10), tram (11), lightVruVehicle (12), animal (13), agricultural (14), roadSideUnit (15) } (0..255) ``` ### TrafficRule This DE indicates traffic rules that apply to vehicles at a certain position. The value shall be set to: - `0` if overtaking is prohibited for all vehicles, - `1` if overtaking is prohibited for trucks, - `2` if vehicles should pass to the right lane, - `3` if vehicles should pass to the left lane.     **Categories**: Infrastructure information Traffic information     **Revision**: _Editorial update in V2.1.1_ ```asn1 TrafficRule ::= ENUMERATED { noPassing (0), noPassingForTrucks (1), passToRight (2), passToLeft (3), ...} ``` ### TrailerPresenceInformation This DE provides information about the presence of a trailer. The value shall be set to: - 0 `noTrailerPresent` : to indicate that no trailer is present, i.e. either the vehicle is physically not enabled to tow a trailer or it has been detected that no trailer is present. - 1 `trailerPresentWithKnownLength` : to indicate that a trailer has been detected as present and the length is included in the vehicle length value. - 2 `trailerPresentWithUnknownLength` : to indicate that a trailer has been detected as present and the length is not included in the vehicle length value. - 3 `trailerPresenceIsUnknown` : to indicate that information about the trailer presence is unknown, i.e. the vehicle is physically enabled to tow a trailer but the detection of trailer presence/absence is not possible. - 4 `unavailable` : to indicate that the information about the presence of a trailer is not available, i.e. it is neither known whether the vehicle is able to tow a trailer nor the detection of trailer presence/absence is possible.     **Categories**: Vehicle information     **Revision**: _Created in V2.1.1 based on VehicleLengthConfidenceIndication_ ```asn1 TrailerPresenceInformation ::= ENUMERATED { noTrailerPresent (0), trailerPresentWithKnownLength (1), trailerPresentWithUnknownLength (2), trailerPresenceIsUnknown (3), unavailable (4) } ``` ### TrajectoryInterceptionProbability This DE defines the probability that the ego trajectory intercepts with any other object's trajectory on the road. The value shall be set to: - `n (n >= 0 and n <= 50)` to indicate the actual probability, - the values between 51 and 62 are reserved, - `63`: to indicate that the information is unavailable.     **Unit**: _2%_     **Categories**: Kinematics information     **Revision**: _Created in V2.1.1_ ```asn1 TrajectoryInterceptionProbability ::= INTEGER { unavailable (63) } (0..63) ``` ### TrajectoryInterceptionConfidence This DE defines the confidence level of the trajectoryInterceptionProbability. The value shall be set to: - `0` to indicate confidence level less than 50 %, - `1` to indicate confidence level greater than or equal to 50 % and less than 70 %, - `2` to indicate confidence level greater than or equal to 70 % and less than 90 %, - `3` to indicate confidence level greater than or equal to 90%.     **Categories**: Kinematics information     **Revision**: _Created in V2.1.1_ ```asn1 TrajectoryInterceptionConfidence ::= INTEGER { lessthan50percent (0), between50and70Percent (1), between70and90Percent (2), above90Percent (3) } (0..3) ``` ### TransmissionInterval This DE represents the time interval between two consecutive message transmissions. Example: a time interval between two consecutive message transmissions.     **Unit**: _0,001 s_     **Categories**: Basic information     **Revision**: _V1.3.1_ >>> NOTE: this DE is kept for backwards compatibility reasons only. It is recommended to use the [**DeltaTimeMilliSecondPos**](#DeltaTimeMilliSecondPos) instead. >>> ```asn1 TransmissionInterval::= INTEGER (1..10000) ``` ### TurningDirection This DE provides the turning direction. The value shall be set to: - `left` for turning to te left. - `right`for turing to the right.     **Categories**: Kinematics information     **Revision**: _Created in V2.1.1_ ```asn1 TurningDirection::= ENUMERATED { left, right } ``` ### TurningRadius This DE represents the smallest circular turn (i.e. U-turn) that the vehicle is capable of making. The value shall be set to: - `n (n > 0 and n < 254)` indicates the applicable value is equal to or less than n x 0,4 metre, and greater than (n-1) x 0,4 metre, - `254` indicates that the turning radius is greater than 253 x 0,4 metre = 101.2 metres, - `255` indicates that the information is unavailable. For vehicle with tracker, the turning radius applies to the vehicle only.     **Unit**: _0,4 metre_     **Categories**: Vehicle information     **Revision**: _Description revised V2.1.1 (the meaning of 254 has changed slightly)_ ```asn1 TurningRadius ::= INTEGER { outOfRange (254), unavailable (255) } (1..255) ``` ### ValidityDuration This DE represents the duration of a traffic event validity.     **Unit**: _1 s_     **Categories**: Basic information     **Revision**: _V1.3.1_ >>> NOTE: this DE is kept for backwards compatibility reasons only. It is recommended to use the [**DeltaTimeSecond**](#DeltaTimeSecond) instead. >>> ```asn1 ValidityDuration::= INTEGER (0..86400) ``` ### VDS This DE represents the Vehicle Descriptor Section (VDS). The values are assigned according to ISO 3779 [i.6].     **Categories**: Vehicle information     **Revision**: _V1.3.1_ ```asn1 VDS ::= IA5String (SIZE(6)) ``` ### VehicleBreakdownSubCauseCode This DE represents the value of the sub cause codes of the [**CauseCode**](#CauseCode) `vehicleBreakdown`. The value shall be set to: - 0 `unavailable` : in case further detailed information on cause of vehicle break down is unavailable, - 1 `lackOfFuel` : in case vehicle break down is due to lack of fuel, - 2 `lackOfBatteryPower` : in case vehicle break down is caused by lack of battery power, - 3 `engineProblem` : in case vehicle break down is caused by an engine problem, - 4 `transmissionProblem` : in case vehicle break down is caused by transmission problem, - 5 `engineCoolingProblem`: in case vehicle break down is caused by an engine cooling problem, - 6 `brakingSystemProblem`: in case vehicle break down is caused by a braking system problem, - 7 `steeringProblem` : in case vehicle break down is caused by a steering problem, - 8 `tyrePuncture` : in case vehicle break down is caused by tyre puncture, - 9 `tyrePressureProblem` : in case low tyre pressure in detected, - 10 `vehicleOnFire` : in case the vehicle is on fire. - 11-255 : are reserved for future usage.     **Categories**: Traffic information ```asn1 VehicleBreakdownSubCauseCode ::= INTEGER { unavailable (0), lackOfFuel (1), lackOfBatteryPower (2), engineProblem (3), transmissionProblem (4), engineCoolingProblem (5), brakingSystemProblem (6), steeringProblem (7), tyrePuncture (8), tyrePressureProblem (9), vehicleOnFire (10) } (0..255) ``` ### VehicleHeight This DE represents the height of the vehicle, measured from the ground to the highest point, excluding any antennas. In case vehicles are equipped with adjustable ride heights, camper shells, and any other equipment which may result in varying height, the largest possible height shall be used. The value shall be set to: - `n (n >0 and n < 127)` indicates the applicable value is equal to or less than n x 0,05 metre, and greater than (n-1) x 0,05 metre, - `127` indicates that the vehicle width is greater than 6,3 metres, - `128` indicates that the information in unavailable.     **Unit**: _0,05 metre_     **Revision**: _created in V2.1.1_ ```asn1 VehicleHeight ::= INTEGER { outOfRange (126), unavailable (127) }(1..128) ``` ### VehicleLengthConfidenceIndication This DE provides information about the presence of a trailer. The value shall be set to: - 0 `noTrailerPresent` : to indicate that no trailer is present, i.e. either the vehicle is physically not enabled to tow a trailer or it has been detected that no trailer is present, - 1 `trailerPresentWithKnownLength` : to indicate that a trailer has been detected as present and the length is included in the vehicle length value, - 2 `trailerPresentWithUnknownLength` : to indicate that a trailer has been detected as present and the length is not included in the vehicle length value, - 3 `trailerPresenceIsUnknown` : to indicate that information about the trailer presence is unknown, i.e. the vehicle is physically enabled to tow a trailer but the detection of trailer presence/absence is not possible, - 4 `unavailable` : to indicate that the information about the presence of a trailer is not available, i.e. it is neither known whether the vehicle is able to tow a trailer, nor the detection of trailer presence/absence is possible.     **Categories**: Vehicle information     **Revision**: _Description revised in V2.1.1_ >>> NOTE: this DE is kept for backwards compatibility reasons only. It is recommended to use the [**TrailerPresenceInformation**](#TrailerPresenceInformation) instead. >>> ```asn1 VehicleLengthConfidenceIndication ::= ENUMERATED { noTrailerPresent (0), trailerPresentWithKnownLength (1), trailerPresentWithUnknownLength (2), trailerPresenceIsUnknown (3), unavailable (4) } ``` ### VehicleLengthValue This DE represents the length of a vehicle. The value shall be set to: - `n (n > 0 and n < 1022)` to indicate the applicable value n is equal to or less than n x 0,1 metre, and greater than (n-1) x 0,1 metre, - `1 022` to indicate that the vehicle length is greater than 102.1 metres, - `1 023` to indicate that the information in unavailable.     **Unit**: _0,1 metre_     **Categories**: Vehicle information     **Revision**: _Description updated in V2.1.1 (the meaning of 1 022 has changed slightly)._ ```asn1 VehicleLengthValue ::= INTEGER { outOfRange(1022), unavailable(1023) } (1..1023) ``` ### VehicleMass This DE represents the mass of an empty loaded vehicle. The value shall be set to: - `n (n > 0 and n < 1023)` to indicate that the applicable value is equal to or less than n x 10^5 gramm, and greater than (n-1) x 10^5 gramm, - `1 023` indicates that the vehicle mass is greater than 102 200 000 g, - `1 024` indicates the vehicle mass information is unavailable.     **Unit**: _10^5 gramm_     **Categories**: Vehicle information     **Revision**: _Description updated in V2.1.1 (the meaning of 1 023 has changed slightly)._ >>> NOTE: The empty load vehicle is defined in ISO 1176 [i.8], clause 4.6. >>> ```asn1 VehicleMass ::= INTEGER { outOfRange (1023), unavailable(1024) } (1..1024) ``` ### VehicleRole This DE indicates the role played by a vehicle at a point in time. The value shall be set to: - 0 `default` : to indicate the default vehicle role as indicated by the vehicle type, - 1 `publicTransport` : to indicate that the vehicle is used to operate public transport service, - 2 `specialTransport` : to indicate that the vehicle is used for special transport purpose, e.g. oversized trucks, - 3 `dangerousGoods` : to indicate that the vehicle is used for dangerous goods transportation, - 4 `roadWork` : to indicate that the vehicle is used to realize roadwork or road maintenance mission, - 5 `rescue` : to indicate that the vehicle is used for rescue purpose in case of an accident, e.g. as a towing service, - 6 `emergency` : to indicate that the vehicle is used for emergency mission, e.g. ambulance, fire brigade, - 7 `safetyCar` : to indicate that the vehicle is used for public safety, e.g. patrol, - 8 `agriculture` : to indicate that the vehicle is used for agriculture, e.g. farm tractor, - 9 `commercial` : to indicate that the vehicle is used for transportation of commercial goods, - 10 `military` : to indicate that the vehicle is used for military purpose, - 11 `roadOperator` : to indicate that the vehicle is used in road operator missions, - 12 `taxi` : to indicate that the vehicle is used to provide an authorized taxi service. - 13 `reserved` : is reserved for future usage. - 14 `reserved` : is reserved for future usage. - 15 `reserved` : is reserved for future usage.     **Categories**: Vehicle Information     **Revision**: _Description updated in V2.1.1 (removed reference to CEN/TS 16157-3)_ ```asn1 VehicleRole ::= ENUMERATED { default (0), publicTransport (1), specialTransport(2), dangerousGoods (3), roadWork (4), rescue (5), emergency (6), safetyCar (7), agriculture (8), commercial (9), military (10), roadOperator (11), taxi (12), reserved1 (13), reserved2 (14), reserved3 (15) } ``` ### VehicleSubClass This DE describes the subclass of a vehicle. The value shall be set to: - `0` unknown : to indicate that the type of vehicle is unknown, - `1` passengerCar : to indicate a small passenger car as defined in UNECE/TRANS/WP.29/78/Rev.4 [i.16] class M1, - `2` bus : to indicate a large passenger vehicle as defined in UNECE/TRANS/WP.29/78/Rev.4 [i.16] class M2, M3, - `3` lightTruck : to indicate a light goods vehicle as defined in UNECE/TRANS/WP.29/78/Rev.4 [i.16] class N1, - `4` heavyTruck : to indicate a heavy goods vehicle as defined in UNECE/TRANS/WP.29/78/Rev.4 [i.16] class N2, N3, - `5` trailer : to indicate an unpowered vehicle that is intended to be towed by a powered vehicle as defined in UNECE/TRANS/WP.29/78/Rev.4 [i.16] class O, - `6` specialVehicles : to indicate a vehicle which has a special purpose other than the above (e.g. moving road works vehicle), - `7` tram : to indicate a vehicle running on tracks along public streets, - `8` emergencyVehicle : to indicate a vehicle used in an emergency situation such as an ambulance, police car or fire engine, - `9` agricultural : to indicate a vehicle used for agricultural purposes, - Values 10 to 31 are reserved for future use.     **Categories**: Vehicle information     **Revision**: _Created in V2.1.1_ ```asn1 VehicleSubClass ::= INTEGER { unknown (0), passengerCar (1), bus (2), lightTruck (3), heavyTruck (4), trailer (5), specialVehicles (6), tram (7), emergencyVehicle (8), agricultural (9) } (0..31) ``` ### VehicleWidth This DE represents the width of a vehicle, excluding side mirrors and possible similar extensions. The value shall be set to: - `n (n >0 and n < 61)` indicates the applicable value is equal to or less than n x 0,1 metre, and greater than (n-1) x 0,1 metre, - `61`indicates that the vehicle width is greater than 6,0 metres, - `62`indicates that the information in unavailable.     **Unit**: _0,1 metre_     **Categories**: Vehicle information     **Revision**: _Description updated in V2.1.1 (the meaning of 61 has changed slightly)._ ```asn1 VehicleWidth ::= INTEGER { outOfRange (61), unavailable (62) } (1..62) ``` ### VerticalAccelerationValue This DE represents the vehicle acceleration at vertical direction in the centre of the mass of the empty vehicle. The value shall be provided in the vehicle coordinate system as defined in ISO 8855 [2], clause 2.11. The value shall be set to: - `-160` for acceleration values equal to or less than -16 m/s², - `n (n > -160 and n <= 0)` to indicate downwards acceleration equal to or less than n x 0,1 m/s², and greater than (n-1) x 0,1 m/s², - `n (n > 0 and n < 160)` to indicate upwards acceleration equal to or less than n x 0,1 m/s², and greater than (n-1) x 0,1 m/s², - `160` for acceleration values greater than 15,9 m/s², - `161` when the data is unavailable.     **Unit**: _0,1 m/s²_     **Categories**: Vehicle information     **Revision**: _Desciption updated in V2.1.1 (the meaning of 160 has changed slightly)._ >>> NOTE: The empty load vehicle is defined in ISO 1176 [i.8], clause 4.6. >>> ```asn1 VerticalAccelerationValue ::= INTEGER { negativeOutOfRange (-160), positiveOutOfRange (160), unavailable (161) } (-160 .. 161) ``` ### VruClusterProfiles This DE Identifies all the VRU profile types within a cluster. It consist of a Bitmap encoding VRU profiles, to allow multiple profiles to be indicated in a single cluster (heterogeneous cluster if more than one profile). The corresponding bit shall be set to 1 under the following conditions: - 0 `pedestrian` : indicates that the VRU cluster contains at least one pedestrian VRU, - 1 `bicycle` : indicates that the VRU cluster contains at least one bicycle VRU member, - 2 `motorcyclist` : indicates that the VRU cluster contains at least one motorcycle VRU member, - 3 `animal` : indicates that the VRU cluster contains at least one animal VRU member. Otherwise, the corresponding bit shall be set to 0.     **Categories**: VRU information     **Revision**: _Created in V2.1.1_ ```asn1 VruClusterProfiles ::= BIT STRING { pedestrian (0), bicyclist (1), motorcyclist (2), animal (3) } (SIZE(4)) ``` ### VruDeviceUsage This DE represents the possible usage conditions of the VRU device. - The value shall be set to: - 0 `unavailable` : to indicate that the usage conditions are unavailable, - 1 `other (1)` : to indicate that the VRU device is in a state not defined below, - 2 `idle (2)` : to indicate that the human is currently not interacting with the device, - 3 `listeningToAudio` : to indicate that any audio source other than calling is in use, - 4 `typing (4)` : to indicate that the human is texting or performaing any other manual input activity, - 5 `calling (5)` : to indicate that the VRU device is currently receiving a call, - 6 `playingGames (6)` : to indicate that the human is playing games, - 7 `reading (7)` : to indicate that the human is reading on the VRU device, - 8 `viewing (8)` : to indicate that the human is watching dynamic content, including following navigation prompts, viewing videos or other visual contents that are not static. - value 9 to 255 : are reserved for future usage. Value 255 set to "max" in order to bound the size of the encoded field.     **Categories**: VRU information     **Revision**: _Created in V2.1.1_ ```asn1 VruDeviceUsage ::= ENUMERATED { unavailable (0), other (1), idle (2), listeningToAudio (3), typing (4), calling (5), playingGames (6), reading (7), viewing (8), max (255) } ``` ### VruEnvironment This DE represents the possible VRU environment conditions. - The value shall be set to: - 0 `unavailable` : to indicate that the information on the type of environment is unavailable, - 1 `intersectionCrossing` : to indicate that the VRU is on an intersection or crossing, - 2 `zebraCrossing` : to indicate that the VRU is on a zebra crossing (crosswalk), - 3 `sidewalk` : to indicate that the VRU is on a sidewalk, - 4 `onVehicleRoad` : to indicate that the VRU is on a traffic lane, - 5 `protectedGeographicArea`: to indicate that the VRU is in a protected area. - value 5 to 255 : are reserved for future usage. Value 255 is set to "max" in order to bound the size of the encoded field.     **Categories**: VRU information     **Revision**: _Created in V2.1.1_ ```asn1 VruEnvironment ::= ENUMERATED { unavailable (0), intersectionCrossing (1), zebraCrossing (2), sidewalk (3), onVehicleRoad (4), protectedGeographicArea (5), max (255) } ``` ### VruMovementControl This DE indicates the status of the possible human control over a VRU vehicle. The value shall be set to: - 0 `unavailable` : to indicate that the information is unavailable, - 1 `braking` : to indicate that the VRU is braking, - 2 `hardBraking` : to indicate that the VRU is braking hard, - 3 `stopPedaling` : to indicate that the VRU stopped pedaling, - 4 `brakingAndStopPedaling` : to indicate that the VRU stopped pedaling an is braking, - 5 `hardBrakingAndStopPedaling` : to indicate that the VRU stopped pedaling an is braking hard, - 6 `noReaction` : to indicate that the VRU is not changing its behavior. - 7 to 255 : are reserved for future usage. Value 255 is set to "max" in order to bound the size of the encoded field.     **Categories**: VRU information     **Revision**: _Created in V2.1.1_ ```asn1 VruMovementControl ::= ENUMERATED { unavailable (0), braking (1), hardBraking (2), stopPedaling (3), brakingAndStopPedaling (4), hardBrakingAndStopPedaling (5), noReaction (6), max (255) } ``` ### VruSubProfilePedestrian This DE indicates the profile of a pedestrian. The value shall be set to: - 0 `unavailable` : to indicate that the information on is unavailable, - 1 `ordinary-pedestrian` : to indicate a pedestrian to which no more-specific profile applies, - 2 `road-worker` : to indicate a pedestrian with the role of a road worker, - 3 `first-responder` : to indicate a pedestrian with the role of a first responder. - value 4 to 15 : are reserved for future usage. Value 15 is set to "max" in order to bound the size of the encoded field.     **Categories**: VRU information     **Revision**: _Created in V2.1.1_ ```asn1 VruSubProfilePedestrian ::= ENUMERATED { unavailable (0), ordinary-pedestrian (1), road-worker (2), first-responder (3), max (15) } ``` ### VruSubProfileBicyclist This DE indicates the profile of a VRU and its light VRU vehicle / mounted animal. The value shall be set to: - 0 `unavailable` : to indicate that the information is unavailable, - 1 `bicyclist ` : to indicate a cycle and bicyclist, - 2 `wheelchair-user` : to indicate a wheelchair and its user, - 3 `horse-and-rider` : to indicate a horse and rider, - 4 `rollerskater` : to indicate a rolleskater and skater, - 5 `e-scooter` : to indicate an e-scooter and rider, - 6 `personal-transporter` : to indicate a personal-transporter and rider, - 7 `pedelec` : to indicate a pedelec and rider, - 8 `speed-pedelec` : to indicate a speed-pedelec and rider. - 9 to 15 : are reserved for future usage. Value 15 is set to "max" in order to bound the size of the encoded field.     **Categories**: VRU information     **Revision**: _Created in V2.1.1_ ```asn1 VruSubProfileBicyclist ::= ENUMERATED { unavailable (0), bicyclist (1), wheelchair-user (2), horse-and-rider (3), rollerskater (4), e-scooter (5), personal-transporter (6), pedelec (7), speed-pedelec (8), max (15) } ``` ### VruSubProfileMotorcyclist This DE indicates the profile of a motorcyclist and corresponding vehicle. The value shall be set to: - 0 `unavailable ` : to indicate that the information is unavailable, - 1 `moped` : to indicate a moped and rider, - 2 `motorcycle` : to indicate a motorcycle and rider, - 3 `motorcycle-and-sidecar-right` : to indicate a motorcycle with sidecar on the right and rider, - 4 `motorcycle-and-sidecar-left` : to indicate a motorcycle with sidecar on the left and rider. - 5 to 15 : are reserved for future usage. Value 15 is set to "max" in order to bound the size of the encoded field.     **Categories**: VRU information     **Revision**: _Created in V2.1.1_ ```asn1 VruSubProfileMotorcyclist ::= ENUMERATED { unavailable (0), moped (1), motorcycle (2), motorcycle-and-sidecar-right (3), motorcycle-and-sidecar-left (4), max (15) } ``` ### VruSubProfileAnimal This DE indicates the profile of an animal The value shall be set to: - 0 `unavailable` : to indicate that the information is unavailable, - 1 `wild-animal` : to indicate a animal living in the wildness, - 2 `farm-animal` : to indicate an animal beloning to a farm, - 3 `service-animal` : to indicate an animal that supports a human being. - 4 to 15 : are reserved for future usage. Value 15 is set to "max" in order to bound the size of the encoded field.     **Categories**: VRU information     **Revision**: _Created in V2.1.1_ ```asn1 VruSubProfileAnimal ::= ENUMERATED { unavailable (0), wild-animal (1), farm-animal (2), service-animal (3), max (15) } ``` ### VruSizeClass This DE indicates the approximate size of a VRU including the VRU vehicle used. The value shall be set to: - 0 `unavailable` : to indicate that there is no matched size class or due to privacy reasons in profile 1, - 1 `low` : to indicate that the VRU size class is low depending on the VRU profile, - 2 `medium` : to indicate that the VRU size class is medium depending on the VRU profile, - 3 `high` : to indicate that the VRU size class is high depending on the VRU profile. - 4 to 15 : are reserved for future usage. Value 15 is set to "max" in order to bound the size of the encoded field.     **Categories**: VRU information     **Revision**: _Created in V2.1.1_ ```asn1 VruSizeClass ::= ENUMERATED { unavailable (0), low (1), medium (2), high (3), max (15) } ``` ### VruSpecificExteriorLights This DE describes the status of the exterior light switches of a VRU. The value of each bit indicates the state of the switch, which commands the corresponding light. The bit corresponding to a specific light shall be set to 1, when the corresponding switch is turned on, either manually by the driver or VRU or automatically by a vehicle or VRU system: - 0 `unavailable` : indicates no information available, - 1 `backFlashLight ` : indicates the status of the back flash light, - 2 `helmetLight` : indicates the status of the helmet light, - 3 `armLight` : indicates the status of the arm light, - 4 `legLight` : indicates the status of the leg light, - 5 `wheelLight` : indicates the status of the wheel light. - Bits 6 to 8 : are reserved for future use. The bit values do not indicate if the corresponding lamps are alight or not. If VRU is not equipped with a certain light or if the light switch status information is not available, the corresponding bit shall be set to 0.     **Categories**: VRU information     **Revision**: _Created in V2.1.1_ ```asn1 VruSpecificExteriorLights ::= BIT STRING { unavailable (0), backFlashLight (1), helmetLight (2), armLight (3), legLight (4), wheelLight (5) } (SIZE(8)) ``` ### WheelBaseVehicle This DE indicates the perpendicular distance between front and rear axle of the wheel base of vehicle. The value shall be set to: - `n (n >= 1 and n < 126)` if the value is equal to or less than n x 0,1 metre and more than (n-1) x 0,1 metre, - `126` indicates that the wheel base distance is equal to or greater than 12,5 metres, - `127` indicates that the information is unavailable.     **Unit**: _0,1 metre_     **Categories**: Vehicle information     **Revision**: _Created in V2.1.1_ ```asn1 WheelBaseVehicle ::= INTEGER { outOfRange (126), unavailable (127) } (1..127) ``` ### Wgs84AngleConfidence This DE indicates the angle confidence value which represents the estimated accuracy of an angle value with a default confidence level of 95 %. If required, the confidence level can be defined by the corresponding standards applying this DE. The value shall be set to: - `n (n >=1 and n < 126)` if the confidence value is equal to or less than n x 0,1 degrees and more than (n-1) x 0,1 degrees, - `126` if the confidence value is out of range, i.e. greater than 12,5 degrees, - `127` if the confidence value is not available.     **Unit**: _0,1 degrees_     **Categories**: GeoReference Information     **Revision**: _Created in V2.1.1_ ```asn1 Wgs84AngleConfidence ::= INTEGER { outOfRange (126), unavailable (127) } (1..127) ``` ### Wgs84AngleValue This DE represents an angle value in degrees described in the WGS84 reference system with respect to the WGS84 north. The specific WGS84 coordinate system is specified by the corresponding standards applying this DE. When the information is not available, the DE shall be set to 3 601. The value 3600 shall not be used.     **Unit**: _0,1 degrees_     **Categories**: GeoReference Information     **Revision**: _Created in V2.1.1_ ```asn1 Wgs84AngleValue ::= INTEGER { wgs84North (0), wgs84East (900), wgs84South (1800), wgs84West (2700), doNotUse (3600), unavailable (3601) } (0..3601) ``` ### WMInumber This DE represents the World Manufacturer Identifier (WMI). The values are assigned according to ISO 3779 [i.6].     **Categories**: Vehicle information     **Revision**: _V1.3.1_ ```asn1 WMInumber ::= IA5String (SIZE(1..3)) ``` ### WrongWayDrivingSubCauseCode This DE represents the sub cause codes of the [**CauseCode**](#CauseCode) `wrongWayDriving` . The value shall be set to: - 0 `unavailable` : in case further detailed information on wrong way driving event is unavailable, - 1 `wrongLane` : in case vehicle is driving on a lane for which it has no authorization to use, - 2 `wrongDirection` : in case vehicle is driving in a direction that it is not allowed, - 3-255 : reserved for future usage.     **Categories**: Traffic information     **Revision**: _V1.3.1_ ```asn1 WrongWayDrivingSubCauseCode ::= INTEGER { unavailable (0), wrongLane (1), wrongDirection (2) } (0..255) ``` ### YawRateConfidence This DE indicates the yaw rate confidence value which represents the estimated accuracy for a yaw rate value with a default confidence level of 95%. If required, the confidence level can be defined by the corresponding standards applying this DE. The value shall be set to: - `0` if the confidence value is equal to or less than 0,01 degree/second, - `1` if the confidence value is equal to or less than 0,05 degrees/second or greater than 0,01 degree/second, - `2` if the confidence value is equal to or less than 0,1 degree/second or greater than 0,05 degree/second, - `3` if the confidence value is equal to or less than 1 degree/second or greater than 0,1 degree/second, - `4` if the confidence value is equal to or less than 5 degrees/second or greater than 1 degrees/second, - `5` if the confidence value is equal to or less than 10 degrees/second or greater than 5 degrees/second, - `6` if the confidence value is equal to or less than 100 degrees/second or greater than 10 degrees/second, - `7` if the confidence value is out of range, i.e. greater than 100 degrees/second, - `8` if the confidence value is unavailable. NOTE: The fact that a yaw rate value is received with confidence value set to `unavailable(8)` can be caused by several reasons, such as: - the sensor cannot deliver the accuracy at the defined confidence level because it is a low-end sensor, - the sensor cannot calculate the accuracy due to lack of variables, or - there has been a vehicle bus (e.g. CAN bus) error. In all 3 cases above, the yaw rate value may be valid and used by the application. If a yaw rate value is received and its confidence value is set to `outOfRange(7)`, it means that the yaw rate value is not valid and therefore cannot be trusted. Such value is not useful the application.     **Categories**: Traffic information     **Revision**: _Description revised in V2.1.1_ ```asn1 YawRateConfidence ::= ENUMERATED { degSec-000-01 (0), degSec-000-05 (1), degSec-000-10 (2), degSec-001-00 (3), degSec-005-00 (4), degSec-010-00 (5), degSec-100-00 (6), outOfRange (7), unavailable (8) } ``` ### YawRateValue This DE represents the vehicle rotation around z-axis of the coordinate system centred on the centre of mass of the empty-loaded vehicle. The leading sign denotes the direction of rotation. The value shall be provided in the vehicle coordinate system as defined in ISO 8855 [2], clause 2.11. The value shall be set to: - `-32 766` to indicate that the yaw rate is equal to or greater than 327,66 degrees/second to the right, - `n (n > -32 766 and n <= 0)` to indicate that the rotation is clockwise (i.e. to the right) and is equal to or less than n x 0,01 degrees/s, and greater than (n-1) x 0,01 degrees/s, - `n (n > 0 and n < 32 766)` to indicate that the rotation is anti-clockwise (i.e. to the left) and is equal to or less than n x 0,01 degrees/s, and greater than (n-1) x 0,01 degrees/s, - `32 766` to indicate that the yaw rate is greater than 327.65 degrees/second to the left, - `32 767` to indicate that the information is not available. The yaw rate value shall be a raw data value, i.e. not filtered, smoothed or otherwise modified. The reading instant should be the same as for the vehicle acceleration.     **Unit**: _0,01 degree per second._     **Categories**: Vehicle Information     **Revision**: _Desription revised in V2.1.1 (the meaning of 32766 has changed slightly)._ >>> NOTE: The empty load vehicle is defined in ISO 1176 [i.8], clause 4.6. >>> ```asn1 YawRateValue ::= INTEGER { negativeOutOfRange (-32766), positiveOutOfRange (32766), unavailable (32767) } (-32766..32767) ``` ### Acceleration3dWithConfidence This DF represents an acceleration vector with associated confidence value. It shall include the following components: Fields: * polarAcceleration [**AccelerationPolarWithZ**](#AccelerationPolarWithZ)
the representation of the acceleration vector in a polar coordinate system. * cartesianAcceleration [**AccelerationCartesian**](#AccelerationCartesian)
the representation of the acceleration vector in a cartesian coordinate system.     **Categories**: Kinematics information     **Revision**: _Created in V2.1.1_ ```asn1 Acceleration3dWithConfidence::= CHOICE { polarAcceleration AccelerationPolarWithZ, cartesianAcceleration AccelerationCartesian } ``` ### AccelerationPolarWithZ This DF represents an acceleration vector in a polar coordinate system. It shall include the following components: Fields: * accelerationMagnitude [**AccelerationMagnitude**](#AccelerationMagnitude)
magnitude of the acceleration vector in the X-Y plane with the associated confidence value. Negative magnitude values indicate accelerating backwards. * accelerationDirection [**CartesianAngle**](#CartesianAngle)
polar angle of the acceleration vector in the X-Y plane with the associated confidence value. * zAcceleration [**AccelerationComponent**](#AccelerationComponent) OPTIONAL
the optional z component of the acceleration vector with the associated confidence value.     **Categories**: Kinematics information     **Revision**: _Created in V2.1.1_ ```asn1 AccelerationPolarWithZ::= SEQUENCE{ accelerationMagnitude AccelerationMagnitude, accelerationDirection CartesianAngle, zAcceleration AccelerationComponent OPTIONAL } ``` ### AccelerationCartesian This DF represents a acceleration vector in a cartesian coordinate system. It shall include the following components: Fields: * xAcceleration [**AccelerationComponent**](#AccelerationComponent)
the x component of the acceleration vector with the associated confidence value. * yAcceleration [**AccelerationComponent**](#AccelerationComponent)
the y component of the acceleration vector with the associated confidence value. * zAcceleration [**AccelerationComponent**](#AccelerationComponent) OPTIONAL
the optional z component of the acceleration vector with the associated confidence value.     **Categories**: Kinematics information     **Revision**: _Created in V2.1.1_ ```asn1 AccelerationCartesian::= SEQUENCE{ xAcceleration AccelerationComponent, yAcceleration AccelerationComponent, zAcceleration AccelerationComponent OPTIONAL } ``` ### AccelerationComponent This DF represents an acceleration component along with a confidence value. It shall include the following components: Fields: * value [**AccelerationMagnitudeValue**](#AccelerationMagnitudeValue)
the value of the acceleration component which can be estimated as the mean of the current distribution. * confidence [**AccelerationConfidence**](#AccelerationConfidence)
the confidence value associated to the provided value.     **Categories**: Kinematic Information     **Revision**: _Created in V2.1.1_ ```asn1 AccelerationComponent ::= SEQUENCE { value AccelerationMagnitudeValue, confidence AccelerationConfidence } ``` ### AccelerationChangeIndication This DF represents information associated to changes in acceleration. It shall include the following components: Fields: * accelOrDecel [**AccelerationChange**](#AccelerationChange)
the indication of an acceleration change. * actionDeltaTime [**DeltaTimeTenthOfSecond**](#DeltaTimeTenthOfSecond)
the period over which the acceleration change action is performed.     **Categories**: Kinematic Information     **Revision**: _Created in V2.1.1_ ```asn1 AccelerationChangeIndication ::= SEQUENCE { accelOrDecel AccelerationChange, actionDeltaTime DeltaTimeTenthOfSecond, ... } ``` ### AccelerationMagnitude This DF represents the magnitude of the acceleration vector and associated confidence value. It shall include the following components: Fields: * accelerationMagnitudeValue [**AccelerationMagnitudeValue**](#AccelerationMagnitudeValue)
the magnitude of the acceleration vector. * accelerationConfidence [**AccelerationConfidence**](#AccelerationConfidence)
the confidence value of the magnitude value.     **Categories**: Kinematics information     **Revision**: _Created in V2.1.1_ ```asn1 AccelerationMagnitude::= SEQUENCE { accelerationMagnitudeValue AccelerationMagnitudeValue, accelerationConfidence AccelerationConfidence } ``` ### ActionId This DF represents an identifier used to describe a protocol action taken by an ITS-S. It shall include the following components: Fields: * originatingStationId [**StationId**](#StationId)
Id of the ITS-S that takes the action. * sequenceNumber [**SequenceNumber**](#SequenceNumber)
a sequence number.     **Categories**: Communication information     **Revision**: _Created in V2.1.1 based on @ref ActionID._ ```asn1 ActionId ::= SEQUENCE { originatingStationId StationId, sequenceNumber SequenceNumber } ``` ### ActionID This DF represents an identifier used to describe a protocol action taken by an ITS-S. It shall include the following components: Fields: * originatingStationId [**StationID**](#StationID)
Id of the ITS-S that takes the action. * sequenceNumber [**SequenceNumber**](#SequenceNumber)
a sequence number.     **Categories**: Communication information     **Revision**: _V1.3.1_ >>> NOTE: this DF is kept for backwards compatibility reasons only. It is recommended to use the [**ActionId**](#ActionId) instead. >>> ```asn1 ActionID ::= SEQUENCE { originatingStationId StationID, sequenceNumber SequenceNumber } ``` ### ActionIdList This DF shall contain a list of [**ActionId**](#ActionId).     **Categories**: Communication Information     **Revision**: _Created in V2.1.1 based on ReferenceDenms from DENM Release 1_ ```asn1 ActionIdList::= SEQUENCE (SIZE(1..8, ...)) OF ActionId ``` ### Altitude This DF provides the altitude and confidence level of an altitude information in a WGS84 coordinate system. The specific WGS84 coordinate system is specified by the corresponding standards applying this DE. It shall include the following components: Fields: * altitudeValue [**AltitudeValue**](#AltitudeValue)
altitude of a geographical point. * altitudeConfidence [**AltitudeConfidence**](#AltitudeConfidence)
confidence level of the altitudeValue.     **Categories**: GeoReference information     **Revision**: _Description revised in V2.1.1_ >>> NOTE: this DF is kept for backwards compatibility reasons only. It is recommended to use the [**AltitudeWithConfidence**](#AltitudeWithConfidence) instead. >>> ```asn1 Altitude ::= SEQUENCE { altitudeValue AltitudeValue, altitudeConfidence AltitudeConfidence } ``` ### BasicContainer This DE represents a general container for usage in various types of messages. It shall include the following components: Fields: * stationType [**TrafficParticipantType**](#TrafficParticipantType)
the type of technical context in which the ITS-S that has generated the message is integrated in. * referencePosition [**ReferencePositionWithConfidence**](#ReferencePositionWithConfidence)
the reference position of the station that has generated the message that contains the basic container.     **Categories**: Basic information     **Revision**: _Created in V2.1.1_ ```asn1 BasicContainer ::= SEQUENCE { stationType TrafficParticipantType, referencePosition ReferencePositionWithConfidence, ... } ``` ### CartesianAngle This DF represents a general Data Frame to describe an angle component along with a confidence value in a cartesian coordinate system. It shall include the following components: Fields: * value [**CartesianAngleValue**](#CartesianAngleValue)
The angle value which can be estimated as the mean of the current distribution. * confidence [**AngleConfidence**](#AngleConfidence)
The confidence value associated to the provided value.     **Categories**: Kinematics information     **Revision**: _Created in V2.1.1_ ```asn1 CartesianAngle ::= SEQUENCE { value CartesianAngleValue, confidence AngleConfidence } ``` ### CartesianAngularVelocityComponent This DF represents an angular velocity component along with a confidence value in a cartesian coordinate system. It shall include the following components: Fields: * value [**CartesianAngularVelocityComponentValue**](#CartesianAngularVelocityComponentValue)
The angular velocity component. * confidence [**AngularSpeedConfidence**](#AngularSpeedConfidence)
The confidence value associated to the provided value.     **Categories**: Kinematics information     **Revision**: _Created in V2.1.1_ ```asn1 CartesianAngularVelocityComponent ::= SEQUENCE { value CartesianAngularVelocityComponentValue, confidence AngularSpeedConfidence } ``` ### CartesianAngularAccelerationComponent This DF represents a general Data Frame to describe an angular acceleration component along with a confidence value in a cartesian coordinate system. It shall include the following components: Fields: * value [**CartesianAngularAccelerationComponentValue**](#CartesianAngularAccelerationComponentValue)
The angular acceleration component value. * confidence [**AngularAccelerationConfidence**](#AngularAccelerationConfidence)
The confidence value associated to the provided value.     **Categories**: Kinematics information     **Revision**: _Created in V2.1.1_ ```asn1 CartesianAngularAccelerationComponent ::= SEQUENCE { value CartesianAngularAccelerationComponentValue, confidence AngularAccelerationConfidence } ``` ### CartesianCoordinateWithConfidence This DF represents a coordinate along with a confidence value in a cartesian reference system. It shall include the following components: Fields: * value [**CartesianCoordinateLarge**](#CartesianCoordinateLarge)
the coordinate value, which can be estimated as the mean of the current distribution. * confidence [**CoordinateConfidence**](#CoordinateConfidence)
the coordinate confidence value associated to the provided value.     **Categories**: GeoReference information     **Revision**: _Created in V2.1.1_ ```asn1 CartesianCoordinateWithConfidence ::= SEQUENCE { value CartesianCoordinateLarge, confidence CoordinateConfidence } ``` ### CartesianPosition3d This DF represents a position in a two- or three-dimensional cartesian coordinate system. It shall include the following components: Fields: * xCoordinate [**CartesianCoordinate**](#CartesianCoordinate)
the X coordinate value. * yCoordinate [**CartesianCoordinate**](#CartesianCoordinate)
the Y coordinate value. * zCoordinate [**CartesianCoordinate**](#CartesianCoordinate) OPTIONAL
the optional Z coordinate value.     **Categories**: GeoReference information     **Revision**: _Created in V2.1.1_ ```asn1 CartesianPosition3d::=SEQUENCE{ xCoordinate CartesianCoordinate, yCoordinate CartesianCoordinate, zCoordinate CartesianCoordinate OPTIONAL } ``` ### CartesianPosition3dWithConfidence This DF represents a position in a two- or three-dimensional cartesian coordinate system with an addocaited confidence level for each coordinate. It shall include the following components: Fields: * xCoordinate [**CartesianCoordinateWithConfidence**](#CartesianCoordinateWithConfidence)
the X coordinate value with the associated confidence level. * yCoordinate [**CartesianCoordinateWithConfidence**](#CartesianCoordinateWithConfidence)
the Y coordinate value with the associated confidence level. * zCoordinate [**CartesianCoordinateWithConfidence**](#CartesianCoordinateWithConfidence) OPTIONAL
the optional Z coordinate value with the associated confidence level.     **Categories**: GeoReference information     **Revision**: _Created in V2.1.1_ ```asn1 CartesianPosition3dWithConfidence::= SEQUENCE{ xCoordinate CartesianCoordinateWithConfidence, yCoordinate CartesianCoordinateWithConfidence, zCoordinate CartesianCoordinateWithConfidence OPTIONAL } ``` ### CauseCode This DF is a representation of the cause code value of a traffic event. It shall include the following components: The semantics of the entire DF are completely defined by the component causeCode. The interpretation of the subCauseCode may provide additional information that is not strictly necessary to understand the causeCode itself, and is therefore optional. Fields: * causeCode [**CauseCodeType**](#CauseCodeType)
the main cause of a detected event. * subCauseCode [**SubCauseCodeType**](#SubCauseCodeType)
the subordinate cause of a detected event.     **Categories**: Traffic information     **Revision**: _Editorial update in V2.1.1_ >>> NOTE: this DF is kept for backwards compatibility reasons only. It is recommended to use the [**CauseCodeV2**](#CauseCodeV2) instead. >>> ```asn1 CauseCode ::= SEQUENCE { causeCode CauseCodeType, subCauseCode SubCauseCodeType, ... } ``` ### CauseCodeChoice This DF is a representation of the cause code value and associated sub cause code value of a traffic event. Fields: * reserved0 [**SubCauseCodeType**](#SubCauseCodeType)
* trafficCondition1 [**TrafficConditionSubCauseCode**](#TrafficConditionSubCauseCode)
* accident2 [**AccidentSubCauseCode**](#AccidentSubCauseCode)
* roadworks3 [**RoadworksSubCauseCode**](#RoadworksSubCauseCode)
* reserved4 [**SubCauseCodeType**](#SubCauseCodeType)
* impassability5 [**SubCauseCodeType**](#SubCauseCodeType)
* adverseWeatherCondition-Adhesion6 [**AdverseWeatherCondition-AdhesionSubCauseCode**](#AdverseWeatherCondition-AdhesionSubCauseCode)
* aquaplaning7 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved8 [**SubCauseCodeType**](#SubCauseCodeType)
* hazardousLocation-SurfaceCondition9 [**HazardousLocation-SurfaceConditionSubCauseCode**](#HazardousLocation-SurfaceConditionSubCauseCode)
* hazardousLocation-ObstacleOnTheRoad10 [**HazardousLocation-ObstacleOnTheRoadSubCauseCode**](#HazardousLocation-ObstacleOnTheRoadSubCauseCode)
* hazardousLocation-AnimalOnTheRoad11 [**HazardousLocation-AnimalOnTheRoadSubCauseCode**](#HazardousLocation-AnimalOnTheRoadSubCauseCode)
* humanPresenceOnTheRoad12 [**HumanPresenceOnTheRoadSubCauseCode**](#HumanPresenceOnTheRoadSubCauseCode)
* reserved13 [**SubCauseCodeType**](#SubCauseCodeType)
* wrongWayDriving14 [**WrongWayDrivingSubCauseCode**](#WrongWayDrivingSubCauseCode)
* rescueAndRecoveryWorkInProgress15 [**RescueAndRecoveryWorkInProgressSubCauseCode**](#RescueAndRecoveryWorkInProgressSubCauseCode)
* reserved16 [**SubCauseCodeType**](#SubCauseCodeType)
* adverseWeatherCondition-ExtremeWeatherCondition17 [**AdverseWeatherCondition-ExtremeWeatherConditionSubCauseCode**](#AdverseWeatherCondition-ExtremeWeatherConditionSubCauseCode)
* adverseWeatherCondition-Visibility18 [**AdverseWeatherCondition-VisibilitySubCauseCode**](#AdverseWeatherCondition-VisibilitySubCauseCode)
* adverseWeatherCondition-Precipitation19 [**AdverseWeatherCondition-PrecipitationSubCauseCode**](#AdverseWeatherCondition-PrecipitationSubCauseCode)
* violence20 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved21 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved22 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved23 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved24 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved25 [**SubCauseCodeType**](#SubCauseCodeType)
* slowVehicle26 [**SlowVehicleSubCauseCode**](#SlowVehicleSubCauseCode)
* dangerousEndOfQueue27 [**DangerousEndOfQueueSubCauseCode**](#DangerousEndOfQueueSubCauseCode)
* reserved28 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved29 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved30 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved31 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved32 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved33 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved34 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved35 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved36 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved37 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved38 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved39 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved40 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved41 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved42 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved43 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved44 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved45 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved46 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved47 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved48 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved49 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved50 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved51 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved52 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved53 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved54 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved55 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved56 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved57 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved58 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved59 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved60 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved61 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved62 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved63 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved64 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved65 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved66 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved67 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved68 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved69 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved70 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved71 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved72 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved73 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved74 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved75 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved76 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved77 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved78 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved79 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved80 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved81 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved82 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved83 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved84 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved85 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved86 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved87 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved88 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved89 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved90 [**SubCauseCodeType**](#SubCauseCodeType)
* vehicleBreakdown91 [**VehicleBreakdownSubCauseCode**](#VehicleBreakdownSubCauseCode)
* postCrash92 [**PostCrashSubCauseCode**](#PostCrashSubCauseCode)
* humanProblem93 [**HumanProblemSubCauseCode**](#HumanProblemSubCauseCode)
* stationaryVehicle94 [**StationaryVehicleSubCauseCode**](#StationaryVehicleSubCauseCode)
* emergencyVehicleApproaching95 [**EmergencyVehicleApproachingSubCauseCode**](#EmergencyVehicleApproachingSubCauseCode)
* hazardousLocation-DangerousCurve96 [**HazardousLocation-DangerousCurveSubCauseCode**](#HazardousLocation-DangerousCurveSubCauseCode)
* collisionRisk97 [**CollisionRiskSubCauseCode**](#CollisionRiskSubCauseCode)
* signalViolation98 [**SignalViolationSubCauseCode**](#SignalViolationSubCauseCode)
* dangerousSituation99 [**DangerousSituationSubCauseCode**](#DangerousSituationSubCauseCode)
* railwayLevelCrossing100 [**RailwayLevelCrossingSubCauseCode**](#RailwayLevelCrossingSubCauseCode)
* reserved101 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved102 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved103 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved104 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved105 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved106 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved107 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved108 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved109 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved110 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved111 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved112 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved113 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved114 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved115 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved116 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved117 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved118 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved119 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved120 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved121 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved122 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved123 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved124 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved125 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved126 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved127 [**SubCauseCodeType**](#SubCauseCodeType)
* reserved128 [**SubCauseCodeType**](#SubCauseCodeType)
    **Categories**: Traffic information     **Revision**: _Created in V2.1.1_ >>> NOTE: this DF is defined for use as part of CauseCodeV2. It is recommended to use CauseCodeV2. >>> ```asn1 CauseCodeChoice::= CHOICE { reserved0 SubCauseCodeType, trafficCondition1 TrafficConditionSubCauseCode, accident2 AccidentSubCauseCode, roadworks3 RoadworksSubCauseCode, reserved4 SubCauseCodeType, impassability5 SubCauseCodeType, adverseWeatherCondition-Adhesion6 AdverseWeatherCondition-AdhesionSubCauseCode, aquaplaning7 SubCauseCodeType, reserved8 SubCauseCodeType, hazardousLocation-SurfaceCondition9 HazardousLocation-SurfaceConditionSubCauseCode, hazardousLocation-ObstacleOnTheRoad10 HazardousLocation-ObstacleOnTheRoadSubCauseCode, hazardousLocation-AnimalOnTheRoad11 HazardousLocation-AnimalOnTheRoadSubCauseCode, humanPresenceOnTheRoad12 HumanPresenceOnTheRoadSubCauseCode, reserved13 SubCauseCodeType, wrongWayDriving14 WrongWayDrivingSubCauseCode, rescueAndRecoveryWorkInProgress15 RescueAndRecoveryWorkInProgressSubCauseCode, reserved16 SubCauseCodeType, adverseWeatherCondition-ExtremeWeatherCondition17 AdverseWeatherCondition-ExtremeWeatherConditionSubCauseCode, adverseWeatherCondition-Visibility18 AdverseWeatherCondition-VisibilitySubCauseCode, adverseWeatherCondition-Precipitation19 AdverseWeatherCondition-PrecipitationSubCauseCode, violence20 SubCauseCodeType, reserved21 SubCauseCodeType, reserved22 SubCauseCodeType, reserved23 SubCauseCodeType, reserved24 SubCauseCodeType, reserved25 SubCauseCodeType, slowVehicle26 SlowVehicleSubCauseCode, dangerousEndOfQueue27 DangerousEndOfQueueSubCauseCode, reserved28 SubCauseCodeType, reserved29 SubCauseCodeType, reserved30 SubCauseCodeType, reserved31 SubCauseCodeType, reserved32 SubCauseCodeType, reserved33 SubCauseCodeType, reserved34 SubCauseCodeType, reserved35 SubCauseCodeType, reserved36 SubCauseCodeType, reserved37 SubCauseCodeType, reserved38 SubCauseCodeType, reserved39 SubCauseCodeType, reserved40 SubCauseCodeType, reserved41 SubCauseCodeType, reserved42 SubCauseCodeType, reserved43 SubCauseCodeType, reserved44 SubCauseCodeType, reserved45 SubCauseCodeType, reserved46 SubCauseCodeType, reserved47 SubCauseCodeType, reserved48 SubCauseCodeType, reserved49 SubCauseCodeType, reserved50 SubCauseCodeType, reserved51 SubCauseCodeType, reserved52 SubCauseCodeType, reserved53 SubCauseCodeType, reserved54 SubCauseCodeType, reserved55 SubCauseCodeType, reserved56 SubCauseCodeType, reserved57 SubCauseCodeType, reserved58 SubCauseCodeType, reserved59 SubCauseCodeType, reserved60 SubCauseCodeType, reserved61 SubCauseCodeType, reserved62 SubCauseCodeType, reserved63 SubCauseCodeType, reserved64 SubCauseCodeType, reserved65 SubCauseCodeType, reserved66 SubCauseCodeType, reserved67 SubCauseCodeType, reserved68 SubCauseCodeType, reserved69 SubCauseCodeType, reserved70 SubCauseCodeType, reserved71 SubCauseCodeType, reserved72 SubCauseCodeType, reserved73 SubCauseCodeType, reserved74 SubCauseCodeType, reserved75 SubCauseCodeType, reserved76 SubCauseCodeType, reserved77 SubCauseCodeType, reserved78 SubCauseCodeType, reserved79 SubCauseCodeType, reserved80 SubCauseCodeType, reserved81 SubCauseCodeType, reserved82 SubCauseCodeType, reserved83 SubCauseCodeType, reserved84 SubCauseCodeType, reserved85 SubCauseCodeType, reserved86 SubCauseCodeType, reserved87 SubCauseCodeType, reserved88 SubCauseCodeType, reserved89 SubCauseCodeType, reserved90 SubCauseCodeType, vehicleBreakdown91 VehicleBreakdownSubCauseCode, postCrash92 PostCrashSubCauseCode, humanProblem93 HumanProblemSubCauseCode, stationaryVehicle94 StationaryVehicleSubCauseCode, emergencyVehicleApproaching95 EmergencyVehicleApproachingSubCauseCode, hazardousLocation-DangerousCurve96 HazardousLocation-DangerousCurveSubCauseCode, collisionRisk97 CollisionRiskSubCauseCode, signalViolation98 SignalViolationSubCauseCode, dangerousSituation99 DangerousSituationSubCauseCode, railwayLevelCrossing100 RailwayLevelCrossingSubCauseCode, reserved101 SubCauseCodeType, reserved102 SubCauseCodeType, reserved103 SubCauseCodeType, reserved104 SubCauseCodeType, reserved105 SubCauseCodeType, reserved106 SubCauseCodeType, reserved107 SubCauseCodeType, reserved108 SubCauseCodeType, reserved109 SubCauseCodeType, reserved110 SubCauseCodeType, reserved111 SubCauseCodeType, reserved112 SubCauseCodeType, reserved113 SubCauseCodeType, reserved114 SubCauseCodeType, reserved115 SubCauseCodeType, reserved116 SubCauseCodeType, reserved117 SubCauseCodeType, reserved118 SubCauseCodeType, reserved119 SubCauseCodeType, reserved120 SubCauseCodeType, reserved121 SubCauseCodeType, reserved122 SubCauseCodeType, reserved123 SubCauseCodeType, reserved124 SubCauseCodeType, reserved125 SubCauseCodeType, reserved126 SubCauseCodeType, reserved127 SubCauseCodeType, reserved128 SubCauseCodeType } ``` ### CauseCodeV2 This DF is an alternative representation of the cause code value of a traffic event. It shall include the following components: The semantics of the entire DF are completely defined by the component causeCode. The interpretation of the subCauseCode may provide additional information that is not strictly necessary to understand the causeCode itself, and is therefore optional. Fields: * ccAndScc [**CauseCodeChoice**](#CauseCodeChoice)
the main cause of a detected event. Each entry is of a different type and represents the sub cause code.     **Categories**: Traffic information     **Revision**: _Created in V2.1.1_ ```asn1 CauseCodeV2 ::= SEQUENCE { ccAndScc CauseCodeChoice, ... } ``` ### CenDsrcTollingZone The DF describes the position of a CEN DSRC road side equipment. It shall include the following components: Fields: * protectedZoneLatitude [**Latitude**](#Latitude)
the latitude of the CEN DSRC road side equipment. * protectedZoneLongitude [**Longitude**](#Longitude)
the latitude of the CEN DSRC road side equipment. * cenDsrcTollingZoneId [**ProtectedZoneId**](#ProtectedZoneId) OPTIONAL
    **Categories**: Infrastructure information Communication information     **Revision**: _revised in V2.1.1 (cenDsrcTollingZoneId is directly of type ProtectedZoneId)_ ```asn1 CenDsrcTollingZone ::= SEQUENCE { protectedZoneLatitude Latitude, protectedZoneLongitude Longitude, cenDsrcTollingZoneId ProtectedZoneId OPTIONAL, ... } ``` ### CircularShape This DF represents the shape of a circular area or a right cylinder that is centred on the shape´s reference point. It shall include the following components: Fields: * shapeReferencePoint [**CartesianPosition3d**](#CartesianPosition3d) OPTIONAL
optional reference point that represents the centre of the circle, relative to an externally specified reference position. If this component is absent, the externally specified reference position represents the shape´s reference point. * radius [**StandardLength12b**](#StandardLength12b)
the radius of the circular area. * height [**StandardLength12b**](#StandardLength12b) OPTIONAL
the optional height, present if the shape is a right cylinder extending in the positive z-axis.     **Categories**: GeoReference information     **Revision**: _Created in V2.1.1_ ```asn1 CircularShape ::= SEQUENCE { shapeReferencePoint CartesianPosition3d OPTIONAL, radius StandardLength12b, height StandardLength12b OPTIONAL } ``` ### ClosedLanes This DF indicates the opening/closure status of the lanes of a carriageway. It shall include the following components: Fields: * innerhardShoulderStatus [**HardShoulderStatus**](#HardShoulderStatus) OPTIONAL
this information is optional and shall be included if an inner hard shoulder is present and the information is known. It indicates the open/closing status of inner hard shoulder lanes. * outerhardShoulderStatus [**HardShoulderStatus**](#HardShoulderStatus) OPTIONAL
this information is optional and shall be included if an outer hard shoulder is present and the information is known. It indicates the open/closing status of outer hard shoulder lanes. * drivingLaneStatus [**DrivingLaneStatus**](#DrivingLaneStatus) OPTIONAL
this information is optional and shall be included if the information is known. It indicates the open/closing status of driving lanes. For carriageways with more than 13 driving lanes, the drivingLaneStatus component shall not be present.     **Categories**: GeoReference information Road topology information     **Revision**: _Description revised in V2.1.1_ ```asn1 ClosedLanes ::= SEQUENCE { innerhardShoulderStatus HardShoulderStatus OPTIONAL, outerhardShoulderStatus HardShoulderStatus OPTIONAL, drivingLaneStatus DrivingLaneStatus OPTIONAL, ... } ``` ### ClusterBreakupInfo This DF provides information about the breakup of a cluster. It shall include the following components: Fields: * clusterBreakupReason [**ClusterBreakupReason**](#ClusterBreakupReason)
indicates the reason for breakup. * breakupTime [**DeltaTimeQuarterSecond**](#DeltaTimeQuarterSecond)
indicates the time of breakup.     **Categories**: Cluster Information     **Revision**: _Created in V2.1.1_ ```asn1 ClusterBreakupInfo ::= SEQUENCE { clusterBreakupReason ClusterBreakupReason, breakupTime DeltaTimeQuarterSecond, ... } ``` ### ClusterJoinInfo This DF provides information about the joining of a cluster. It shall include the following components: Fields: * clusterId [**Identifier1B**](#Identifier1B)
indicates the identifier of the cluster. * joinTime [**DeltaTimeQuarterSecond**](#DeltaTimeQuarterSecond)
indicates the time of joining.     **Categories**: Cluster Information     **Revision**: _Created in V2.1.1_ ```asn1 ClusterJoinInfo ::= SEQUENCE { clusterId Identifier1B, joinTime DeltaTimeQuarterSecond, ... } ``` ### ClusterLeaveInfo The DF provides information about the leaving of a cluster. It shall include the following components: Fields: * clusterId [**Identifier1B**](#Identifier1B)
indicates the cluster. * clusterLeaveReason [**ClusterLeaveReason**](#ClusterLeaveReason)
indicates the reason for leaving.     **Categories**: Cluster Information     **Revision**: _Created in V2.1.1_ ```asn1 ClusterLeaveInfo ::= SEQUENCE { clusterId Identifier1B, clusterLeaveReason ClusterLeaveReason, ... } ``` ### CorrelationColumn This DF represents a column of a lower triangular positive semi-definite matrix and consists of a list of correlation cell values ordered by rows. Given a matrix "A" of size n x n, the number of columns to be included in the lower triangular matrix is k=n-1. Each column "i" of the lower triangular matrix then contains k-(i-1) values (ordered by rows from 1 to n-1), where "i" refers to the column number count starting at 1 from the left.     **Categories**: Sensing Information     **Revision**: _Created in V2.1.1_ ```asn1 CorrelationColumn ::= SEQUENCE SIZE (1..13,...) OF CorrelationCellValue ``` ### Curvature This DF represents the curvature of the vehicle trajectory and the associated confidence value. The curvature detected by a vehicle represents the curvature of actual vehicle trajectory. It shall include the following components: Fields: * curvatureValue [**CurvatureValue**](#CurvatureValue)
Detected curvature of the vehicle trajectory. * curvatureConfidence [**CurvatureConfidence**](#CurvatureConfidence)
along with a confidence value of the curvature value with a predefined confidence level.     **Categories**: Vehicle information     **Revision**: _Description revised in V2.1.1_ ```asn1 Curvature ::= SEQUENCE { curvatureValue CurvatureValue, curvatureConfidence CurvatureConfidence } ``` ### DangerousGoodsExtended This DF provides a description of dangerous goods being carried by a heavy vehicle. It shall include the following components: Fields: * dangerousGoodsType [**DangerousGoodsBasic**](#DangerousGoodsBasic)
Type of dangerous goods. * unNumber **INTEGER** (0..9999)
a 4-digit number that identifies the substance of the dangerous goods as specified in United Nations Recommendations on the Transport of Dangerous Goods - Model Regulations [i.4], * elevatedTemperature **BOOLEAN**
whether the carried dangerous goods are transported at high temperature. If yes, the value shall be set to TRUE, * tunnelsRestricted **BOOLEAN**
whether the heavy vehicle carrying dangerous goods is restricted to enter tunnels. If yes, the value shall be set to TRUE, * limitedQuantity **BOOLEAN**
whether the carried dangerous goods are packed with limited quantity. If yes, the value shall be set to TRUE, * emergencyActionCode [**IA5String**](#IA5String) (SIZE (1..24)) OPTIONAL
physical signage placard at the vehicle that carries information on how an emergency service should deal with an incident. This component is optional; it shall be present if the information is available. * phoneNumber [**PhoneNumber**](#PhoneNumber) OPTIONAL
contact phone number of assistance service in case of incident or accident. This component is optional, it shall be present if the information is available. * companyName [**UTF8String**](#UTF8String) (SIZE (1..24)) OPTIONAL
name of company that manages the transportation of the dangerous goods. This component is optional; it shall be present if the information is available.     **Categories**: Vehicle information     **Revision**: _V1.3.1_ ```asn1 DangerousGoodsExtended ::= SEQUENCE { dangerousGoodsType DangerousGoodsBasic, unNumber INTEGER (0..9999), elevatedTemperature BOOLEAN, tunnelsRestricted BOOLEAN, limitedQuantity BOOLEAN, emergencyActionCode IA5String (SIZE (1..24)) OPTIONAL, phoneNumber PhoneNumber OPTIONAL, companyName UTF8String (SIZE (1..24)) OPTIONAL, ... } ``` ### DeltaReferencePosition This DF defines a geographical point position as a 3 dimensional offset position to a geographical reference point. It shall include the following components: Fields: * deltaLatitude [**DeltaLatitude**](#DeltaLatitude)
A delta latitude offset with regards to the latitude value of the reference position. * deltaLongitude [**DeltaLongitude**](#DeltaLongitude)
A delta longitude offset with regards to the longitude value of the reference position. * deltaAltitude [**DeltaAltitude**](#DeltaAltitude)
A delta altitude offset with regards to the altitude value of the reference position.     **Categories**: GeoReference information     **Revision**: _V1.3.1_ ```asn1 DeltaReferencePosition ::= SEQUENCE { deltaLatitude DeltaLatitude, deltaLongitude DeltaLongitude, deltaAltitude DeltaAltitude } ``` ### DigitalMap This DF represents a portion of digital map. It shall contain a list of waypoints [**ReferencePosition**](#ReferencePosition).     **Categories**: GeoReference information     **Revision**: _V1.3.1_ ```asn1 DigitalMap ::= SEQUENCE (SIZE(1..256)) OF ReferencePosition ``` ### EllipticalShape This DF represents the shape of an elliptical area or right elliptical cylinder that is centred on the shape´s reference point. It shall include the following components: Fields: * shapeReferencePoint [**CartesianPosition3d**](#CartesianPosition3d) OPTIONAL
optional reference point which represents the centre of the ellipse, relative to an externally specified reference position. If this component is absent, the externally specified reference position represents the shape´s reference point. * semiMajorAxisLength [**StandardLength12b**](#StandardLength12b)
half length of the major axis of the ellipse. * semiMinorAxisLength [**StandardLength12b**](#StandardLength12b)
half length of the minor axis of the ellipse. * orientation [**Wgs84AngleValue**](#Wgs84AngleValue) OPTIONAL
the optional orientation of the major axis of the ellipse in the WGS84 coordinate system. * height [**StandardLength12b**](#StandardLength12b) OPTIONAL
the optional height, present if the shape is a right elliptical cylinder extending in the positive z-axis.     **Categories**: GeoReference information     **Revision**: _Created in V2.1.1_ ```asn1 EllipticalShape ::= SEQUENCE { shapeReferencePoint CartesianPosition3d OPTIONAL, semiMajorAxisLength StandardLength12b, semiMinorAxisLength StandardLength12b, orientation Wgs84AngleValue OPTIONAL, height StandardLength12b OPTIONAL } ``` ### EuVehicleCategoryCode This DF represents a vehicle category according to the UNECE/TRANS/WP.29/78/Rev.4 [i.16]. The following options are available: Fields: * euVehicleCategoryL [**EuVehicleCategoryL**](#EuVehicleCategoryL)
indicates a vehicle in the L category. * euVehicleCategoryM [**EuVehicleCategoryM**](#EuVehicleCategoryM)
indicates a vehicle in the M category. * euVehicleCategoryN [**EuVehicleCategoryN**](#EuVehicleCategoryN)
indicates a vehicle in the N category. * euVehicleCategoryO [**EuVehicleCategoryO**](#EuVehicleCategoryO)
indicates a vehicle in the O category. * euVehicleCategoryT **NULL**
indicates a vehicle in the T category. * euVehicleCategoryG **NULL**
indicates a vehicle in the G category.     **Categories**: Vehicle information     **Revision**: _Created in V2.1.1_ ```asn1 EuVehicleCategoryCode ::= CHOICE { euVehicleCategoryL EuVehicleCategoryL, euVehicleCategoryM EuVehicleCategoryM, euVehicleCategoryN EuVehicleCategoryN, euVehicleCategoryO EuVehicleCategoryO, euVehicleCategoryT NULL, euVehicleCategoryG NULL } ``` ### EventHistory The DF shall contain a list of [**EventPoint**](#EventPoint). The eventPosition of each [**EventPoint**](#EventPoint) is defined with respect to the previous [**EventPoint**](#EventPoint) in the list. Except for the first [**EventPoint**](#EventPoint) which is defined with respect to a position outside of the context of this DF.     **Categories**: GeoReference information Traffic information     **Revision**: _Generalized the semantics in V2.1.1_ >>> NOTE: this DF is kept for backwards compatibility reasons only. It is recommended to use the [**EventZone**](#EventZone) instead. >>> ```asn1 EventHistory::= SEQUENCE (SIZE(1..23)) OF EventPoint ``` ### EventPoint This DF provides information related to an event at a defined position. It shall include the following components: Fields: * eventPosition [**DeltaReferencePosition**](#DeltaReferencePosition)
offset position of a detected event point to a defined position. * eventDeltaTime [**PathDeltaTime**](#PathDeltaTime) OPTIONAL
optional time travelled by the detecting ITS-S since the previous detected event point. * informationQuality [**InformationQuality**](#InformationQuality)
Information quality of the detection for this event point.     **Categories**: GeoReference information Traffic information     **Revision**: _generalized the semantics in V2.1.1_ ```asn1 EventPoint ::= SEQUENCE { eventPosition DeltaReferencePosition, eventDeltaTime PathDeltaTime OPTIONAL, informationQuality InformationQuality } ``` ### EventZone The DF shall contain a list of [**EventPoint**](#EventPoint), where all [**EventPoint**](#EventPoint) either contain the COMPONENT eventDeltaTime or do not contain the COMPONENT eventDeltaTime. The eventPosition of each [**EventPoint**](#EventPoint) is defined with respect to the previous [**EventPoint**](#EventPoint) in the list. Except for the first [**EventPoint**](#EventPoint) which is defined with respect to a position outside of the context of this DF.     **Categories**: GeoReference information Traffic information     **Revision**: _created in V2.1.1 based on EventHistory_ ```asn1 EventZone::= EventHistory ((WITH COMPONENT (WITH COMPONENTS {..., eventDeltaTime PRESENT})) | (WITH COMPONENT (WITH COMPONENTS {..., eventDeltaTime ABSENT}))) ``` ### GeneralizedLanePosition This DF indicates a transversal position in relation to the different lanes of the road. It is an extension of DE_LanePosition to cover locations (sidewalks, bicycle paths), where Vehicle ITS-S would normally not be present. The following options are available: Fields: * trafficLanePosition [**LanePosition**](#LanePosition)
a position on a traffic lane. * nonTrafficLanePosition [**LanePositionAndType**](#LanePositionAndType)
a position on a lane which is not a traffic lane. * trafficIslandPosition [**TrafficIslandPosition**](#TrafficIslandPosition)
a position on a traffic island * mapPosition [**MapPosition**](#MapPosition)
a position on a lane identified in a MAPEM.     **Categories**: Road Topology information     **Revision**: _created in V2.1.1_ ```asn1 GeneralizedLanePosition::= CHOICE { trafficLanePosition LanePosition, nonTrafficLanePosition LanePositionAndType, trafficIslandPosition TrafficIslandPosition, mapPosition MapPosition, ... } ``` ### Heading This DF represents the Heading in a WGS84 co-ordinates system. The specific WGS84 coordinate system is specified by the corresponding standards applying this DE. It shall include the following components: Fields: * headingValue [**HeadingValue**](#HeadingValue)
the heading value. * headingConfidence [**HeadingConfidence**](#HeadingConfidence)
the confidence value of the heading value with a predefined confidence level.     **Categories**: Kinematics Information     **Revision**: _Description revised in V2.1.1_ >>> NOTE: this DF is kept for backwards compatibility reasons only. It is recommended to use the [**Wgs84Angle**](#Wgs84Angle) instead. >>> ```asn1 Heading ::= SEQUENCE { headingValue HeadingValue, headingConfidence HeadingConfidence } ``` ### HeadingChangeIndication This DF provides information associated to heading change indicators such as a change of direction. It shall include the following components: Fields: * direction [**TurningDirection**](#TurningDirection)
the direction of heading change value. * actionDeltaTime [**DeltaTimeTenthOfSecond**](#DeltaTimeTenthOfSecond)
the period over which a direction change action is performed.     **Categories**: Kinematics Information     **Revision**: _created in V2.1.1_ ```asn1 HeadingChangeIndication ::= SEQUENCE { direction TurningDirection, actionDeltaTime DeltaTimeTenthOfSecond, ... } ``` ### InterferenceManagementChannel This DF represents a frequency channel It shall include the following components: Fields: * centreFrequency **INTEGER** (1 .. 99999)
the centre frequency of the channel in 10^(exp+2) Hz (where exp is exponent) * channelWidth **INTEGER** (0 .. 9999)
width of the channel in 10^exp Hz (where exp is exponent) * exponent **INTEGER** (0 .. 15)
exponent of the power of 10 used in the calculation of the components above.     **Categories**: Communication information     **Revision**: _created in V2.1.1_ ```asn1 InterferenceManagementChannel ::= SEQUENCE { centreFrequency INTEGER (1 .. 99999), channelWidth INTEGER (0 .. 9999), exponent INTEGER (0 .. 15) } ``` ### InterferenceManagementZone This DF represents a zone inside which the ITS communication should be restricted in order to manage interference. It shall include the following components: Fields: * zoneDefinition [**InterferenceManagementZoneDefinition**](#InterferenceManagementZoneDefinition)
contains the geographical definition of the zone. * managementInfo [**InterferenceManagementInfo**](#InterferenceManagementInfo)
contains interference management information applicable in the zone defined in the component zoneDefinition.     **Categories**: Communication information     **Revision**: _created in V2.1.1_ ```asn1 InterferenceManagementZone ::= SEQUENCE { zoneDefinition InterferenceManagementZoneDefinition, managementInfo InterferenceManagementInfo } ``` ### InterferenceManagementZoneDefinition This DF represents the geographical definition of the zone where band sharing occurs. It shall include the following components: Fields: * interferenceManagementZoneLatitude [**Latitude**](#Latitude)
Latitude of the centre point of the interference management zone. * interferenceManagementZoneLongitude [**Longitude**](#Longitude)
Longitude of the centre point of the interference management zone. * interferenceManagementZoneId [**ProtectedZoneId**](#ProtectedZoneId) OPTIONAL
optional identification of the interference management zone. * interferenceManagementZoneShape [**Shape**](#Shape) (WITH COMPONENTS{..., radial ABSENT, radialShapes ABSENT}) OPTIONAL
shape of the interference management zone placed at the centre point.     **Categories**: Communication information     **Revision**: _created in V2.1.1_ ```asn1 InterferenceManagementZoneDefinition::= SEQUENCE{ interferenceManagementZoneLatitude Latitude, interferenceManagementZoneLongitude Longitude, interferenceManagementZoneId ProtectedZoneId OPTIONAL, interferenceManagementZoneShape Shape (WITH COMPONENTS{..., radial ABSENT, radialShapes ABSENT}) OPTIONAL, ... } ``` ### InterferenceManagementInfo This DF shall contain a list of up to 16 definitions containing interference management information, per affected frequency channels.     **Categories**: Communication information.     **Revision**: _created in V2.1.1_ ```asn1 InterferenceManagementInfo::= SEQUENCE (SIZE(1..16,...)) OF InterferenceManagementInfoPerChannel ``` ### InterferenceManagementInfoPerChannel This DF contains interference management information for one affected frequency channel. It shall include the following components: Fields: * interferenceManagementChannel [**InterferenceManagementChannel**](#InterferenceManagementChannel)
frequency channel for which the zone should be applied interference management * interferenceManagementZoneType [**InterferenceManagementZoneType**](#InterferenceManagementZoneType)
type of the interference management zone. * interferenceManagementMitigationType [**MitigationForTechnologies**](#MitigationForTechnologies) OPTIONAL
optional type of the mitigation to be used in the interference management zone. In the case where no mitigation should be applied by the ITS-S, this is indicated by the field interferenceManagementMitigationType being absent. * expiryTime [**TimestampIts**](#TimestampIts) OPTIONAL
optional time at which the validity of the interference management communication zone will expire. This component is present when the interference management is temporarily valid     **Categories**: Communication information     **Revision**: _created in V2.1.1_ ```asn1 InterferenceManagementInfoPerChannel ::= SEQUENCE { interferenceManagementChannel InterferenceManagementChannel, interferenceManagementZoneType InterferenceManagementZoneType, interferenceManagementMitigationType MitigationForTechnologies OPTIONAL, expiryTime TimestampIts OPTIONAL, ... } ``` ### InterferenceManagementZones This DF shall contain a list of up to 16 interference management zones. **EXAMPLE**: An interference management communication zone may be defined around a CEN DSRC road side equipment or an urban rail operational area.     **Categories**: Communication information     **Revision**: _created in V2.1.1_ ```asn1 InterferenceManagementZones ::= SEQUENCE (SIZE(1..16), ...) OF InterferenceManagementZone ``` ### IntersectionReferenceId This DF represents a unique id for an intersection, in accordance with ETSI TS 103 301 [i.15]. It shall include the following components: Fields: * region [**Identifier2B**](#Identifier2B) OPTIONAL
the optional identifier of the entity that is responsible for the region in which the intersection is placed. It is the duty of that entity to guarantee that the [**Id**](#Id) is unique within the region. * id [**Identifier2B**](#Identifier2B)
the identifier of the intersection     **Categories**: Road topology information     **Revision**: _created in V2.1.1_ >>> NOTE: when the component region is present, the IntersectionReferenceId is guaranteed to be globally unique. >>> ```asn1 IntersectionReferenceId ::= SEQUENCE { region Identifier2B OPTIONAL, id Identifier2B } ``` ### ItineraryPath This DF shall contain a list of waypoints [**ReferencePosition**](#ReferencePosition).     **Categories**: GeoReference information     **Revision**: _Editorial update in V2.1.1_ ```asn1 ItineraryPath ::= SEQUENCE SIZE(1..40) OF ReferencePosition ``` ### ItsPduHeader This DF represents a common message header for application and facilities layer messages. It is included at the beginning of an ITS message as the message header. It shall include the following components: Fields: * protocolVersion [**OrdinalNumber1B**](#OrdinalNumber1B)
version of the ITS message. * messageId [**MessageId**](#MessageId)
type of the ITS message. * stationId [**StationId**](#StationId)
the identifier of the ITS-S that generated the ITS message.     **Categories**: Communication information     **Revision**: _update in V2.1.1: messageID and stationID changed to messageId and stationId; messageId is of type MessageId._ ```asn1 ItsPduHeader ::= SEQUENCE { protocolVersion OrdinalNumber1B, messageId MessageId, stationId StationId } ``` ### LanePositionAndType This DF indicates a transversal position in resolution of lanes and the associated lane type. It shall include the following components: Fields: * transversalPosition [**LanePosition**](#LanePosition)
the transversal position. * laneType [**LaneType**](#LaneType)
the type of the lane identified in the component transversalPosition.     **Categories**: GeoReference information     **Revision**: _Created in V2.1.1_ ```asn1 LanePositionAndType::= SEQUENCE { transversalPosition LanePosition, laneType LaneType, ... } ``` ### LateralAcceleration This DF indicates the vehicle acceleration at lateral direction and the confidence value of the lateral acceleration. It shall include the following components: Fields: * lateralAccelerationValue [**LateralAccelerationValue**](#LateralAccelerationValue)
lateral acceleration value at a point in time. * lateralAccelerationConfidence [**AccelerationConfidence**](#AccelerationConfidence)
confidence value of the lateral acceleration value.     **Categories**: Vehicle information     **Revision**: _Description revised in V2.1.1_ >>> NOTE: this DF is kept for backwards compatibility reasons only. It is recommended to use [**Acceleration1d**](#Acceleration1d) instead. >>> ```asn1 LateralAcceleration ::= SEQUENCE { lateralAccelerationValue LateralAccelerationValue, lateralAccelerationConfidence AccelerationConfidence } ``` ### LongitudinalAcceleration This DF indicates the vehicle acceleration at longitudinal direction and the confidence value of the longitudinal acceleration. It shall include the following components: Fields: * longitudinalAccelerationValue [**LongitudinalAccelerationValue**](#LongitudinalAccelerationValue)
longitudinal acceleration value at a point in time. * longitudinalAccelerationConfidence [**AccelerationConfidence**](#AccelerationConfidence)
confidence value of the longitudinal acceleration value.     **Categories**: Vehicle information     **Revision**: _V1.3.1_ >>> NOTE: this DF is kept for backwards compatibility reasons only. It is recommended to use [**Acceleration1d**](#Acceleration1d) instead. >>> ```asn1 LongitudinalAcceleration ::= SEQUENCE { longitudinalAccelerationValue LongitudinalAccelerationValue, longitudinalAccelerationConfidence AccelerationConfidence } ``` ### LongitudinalLanePosition This DF represents the estimated position along the longitudinal length of a particular lane. It shall include the following components: Fields: * longitudinalLanePositionValue [**LongitudinalLanePositionValue**](#LongitudinalLanePositionValue)
the mean value of the longitudinal position within a particular length. * longitudinalLanePositionConfidence [**LongitudinalLanePositionConfidence**](#LongitudinalLanePositionConfidence)
The confidence value associated to the value.     **Categories**: Road topology information     **Revision**: _created in V2.1.1_ ```asn1 LongitudinalLanePosition ::= SEQUENCE { longitudinalLanePositionValue LongitudinalLanePositionValue, longitudinalLanePositionConfidence LongitudinalLanePositionConfidence } ``` ### LowerTriangularPositiveSemidefiniteMatrices This DF shall contain a list of a lower triangular positive semi-definite matrices.     **Categories**: Sensing information     **Revision**: _Created in V2.1.1_ ```asn1 LowerTriangularPositiveSemidefiniteMatrices::= SEQUENCE SIZE (1..4) OF LowerTriangularPositiveSemidefiniteMatrix ``` ### LowerTriangularPositiveSemidefiniteMatrix This DF represents a lower triangular positive semi-definite matrix. It shall include the following components: The number of columns to be included "k" is equal to the number of included components "n" indicated by componentsIncludedIntheMatrix minus 1: k = n-1. These components shall be included in the order or their appearance in componentsIncludedIntheMatrix. Each column "i" of the lowerTriangularCorrelationMatrixColumns contains k-(i-1) values. Fields: * componentsIncludedIntheMatrix [**MatrixIncludedComponents**](#MatrixIncludedComponents)
the indication of which components of a [**PerceivedObject**](#PerceivedObject) are included in the matrix. This component also implicitly indicates the number n of included components which defines the size (n x n) of the full correlation matrix "A". * matrix [**LowerTriangularPositiveSemidefiniteMatrixColumns**](#LowerTriangularPositiveSemidefiniteMatrixColumns)
the list of cells of the lower triangular positive semi-definite matrix ordered by columns and by rows.     **Categories**: Sensing information     **Revision**: _Created in V2.1.1_ ```asn1 LowerTriangularPositiveSemidefiniteMatrix ::= SEQUENCE{ componentsIncludedIntheMatrix MatrixIncludedComponents, matrix LowerTriangularPositiveSemidefiniteMatrixColumns } ``` ### LowerTriangularPositiveSemidefiniteMatrixColumns This DF represents the columns of a lower triangular positive semi-definite matrix, each column not including the main diagonal cell of the matrix. Given a matrix "A" of size n x n, the number of [**CorrelationColumn**](#CorrelationColumn) to be included in the lower triangular matrix is k=n-1.     **Categories**: Sensing information     **Revision**: _Created in V2.1.1_ ```asn1 LowerTriangularPositiveSemidefiniteMatrixColumns ::= SEQUENCE SIZE (1..13) OF CorrelationColumn ``` ### MapPosition This DF indicates a position on a topology description transmitted in a MAPEM according to ETSI TS 103 301 [i.15]. It shall include the following components: Fields: * mapReference [**MapReference**](#MapReference) OPTIONAL
optionally identifies the MAPEM containing the topology information. It is absent if the MAPEM topology is known from the context. * laneId [**Identifier1B**](#Identifier1B) OPTIONAL
optionally identifies the lane in the road segment or intersection topology on which the position is located. * connectionId [**Identifier1B**](#Identifier1B) OPTIONAL
optionally identifies the connection inside the conflict area of an intersection, i.e. it identifies a trajectory for travelling through the conflict area of an intersection which connects e.g an ingress with an egress lane. * longitudinalLanePosition [**LongitudinalLanePosition**](#LongitudinalLanePosition) OPTIONAL
optionally indicates the longitudinal offset of the map-matched position of the object along the lane or connection.     **Categories**: Road topology information     **Revision**: _Created in V2.1.1_ ```asn1 MapPosition ::= SEQUENCE { mapReference MapReference OPTIONAL, laneId Identifier1B OPTIONAL, connectionId Identifier1B OPTIONAL, longitudinalLanePosition LongitudinalLanePosition OPTIONAL, ... } ((WITH COMPONENTS {..., laneId PRESENT, connectionId ABSENT }) | (WITH COMPONENTS {..., laneId ABSENT, connectionId PRESENT })) ``` ### MapReference This DF provides the reference to the information contained in a MAPEM according to ETSI TS 103 301 [i.15]. The following options are provided: Fields: * roadsegment [**RoadSegmentReferenceId**](#RoadSegmentReferenceId)
option that identifies the description of a road segment contained in a MAPEM. * intersection [**IntersectionReferenceId**](#IntersectionReferenceId)
option that identifies the description of an intersection contained in a MAPEM.     **Categories**: Road topology information     **Revision**: _Created in V2.1.1_ ```asn1 MapReference::= CHOICE { roadsegment RoadSegmentReferenceId, intersection IntersectionReferenceId } ``` ### MessageRateHz This DE indicates a message rate. The specified message rate is: mantissa*(10^exponent) Fields: * mantissa **INTEGER** (1..100)
indicates the mantissa. * exponent **INTEGER** (-5..2)
indicates the exponent.     **Unit**: _Hz_     **Categories**: Communication information     **Revision**: _Created in V2.1.1_ ```asn1 MessageRateHz::= SEQUENCE { mantissa INTEGER (1..100), exponent INTEGER (-5..2) } ``` ### MessageSegmentationInfo This DF provides information about a message with respect to the segmentation process at the sender. It shall include the following components: Fields: * totalMsgNo [**CardinalNumber3b**](#CardinalNumber3b)
indicates the total number of messages that has been used on the transmitter side to encode the information. * thisMsgNo [**OrdinalNumber3b**](#OrdinalNumber3b)
indicates the position of the message within of the total set of messages. ```asn1 MessageSegmentationInfo ::= SEQUENCE { totalMsgNo CardinalNumber3b, thisMsgNo OrdinalNumber3b } ``` ### MitigationForTechnologies This DF shall contain a list of [**MitigationPerTechnologyClass**](#MitigationPerTechnologyClass).     **Categories**: Communication information     **Revision**: _Created in V2.1.1_ ```asn1 MitigationForTechnologies ::= SEQUENCE (SIZE(1..8)) OF MitigationPerTechnologyClass ``` ### MitigationPerTechnologyClass This DF represents a set of mitigation parameters for a specific technology, as specified in ETSI TS 103 724 [i.24], clause 7. It shall include the following components: Fields: * accessTechnologyClass [**AccessTechnologyClass**](#AccessTechnologyClass)
channel access technology to which this mitigation is intended to be applied. * lowDutyCycle **INTEGER** (0 .. 10000) OPTIONAL
duty cycle limit. * powerReduction **INTEGER** (0 .. 30) OPTIONAL
the delta value of power to be reduced. * dmcToffLimit **INTEGER** (0 .. 1200) OPTIONAL
idle time limit as defined in ETSI TS 103 175 [i.19]. * dmcTonLimit **INTEGER** (0 .. 20) OPTIONAL
Transmission duration limit, as defined in ETSI EN 302 571 [i.20].     **Unit**: _ms_     **Categories**: Communication information     **Revision**: _Created in V2.1.1_ >>> NOTE: All parameters are optional, as they may not apply to some of the technologies or interference management zone types. Specification details are in ETSI TS 103 724 [i.24], clause 7. >>> ```asn1 MitigationPerTechnologyClass ::= SEQUENCE { accessTechnologyClass AccessTechnologyClass, lowDutyCycle INTEGER (0 .. 10000) OPTIONAL, powerReduction INTEGER (0 .. 30) OPTIONAL, dmcToffLimit INTEGER (0 .. 1200) OPTIONAL, dmcTonLimit INTEGER (0 .. 20) OPTIONAL, ... } ``` ### ObjectClass This DF indicates both the class and associated subclass that best describes an object. The following options are available: Fields: * vehicleSubClass [**TrafficParticipantType**](#TrafficParticipantType) (unknown|passengerCar..tram|agricultural)
the object is a road vehicle and the specific subclass is specified. * vruSubClass [**VruProfileAndSubprofile**](#VruProfileAndSubprofile)
the object is a VRU and the specific subclass is specified. * groupSubClass [**VruClusterInformation**](#VruClusterInformation) (WITH COMPONENTS{..., clusterBoundingBoxShape ABSENT})
the object is a VRU group or cluster and the cluster information is specified. * otherSubClass [**OtherSubClass**](#OtherSubClass)
the object is of a different type than the above and the specific subclass is specified.     **Categories**: Sensing information     **Revision**: _Created in V2.1.1_ ```asn1 ObjectClass ::= CHOICE { vehicleSubClass TrafficParticipantType (unknown|passengerCar..tram|agricultural), vruSubClass VruProfileAndSubprofile, groupSubClass VruClusterInformation (WITH COMPONENTS{..., clusterBoundingBoxShape ABSENT}), otherSubClass OtherSubClass, ... } ``` ### ObjectClassDescription This DF shall contain a list of object classes.     **Categories**: Sensing information     **Revision**: _Created in V2.1.1_ ```asn1 ObjectClassDescription ::= SEQUENCE (SIZE(1..8)) OF ObjectClassWithConfidence ``` ### ObjectClassWithConfidence This DF represents the classification of a detected object together with a confidence level. It shall include the following components: Fields: * objectClass [**ObjectClass**](#ObjectClass)
the class of the object. * confidence [**ConfidenceLevel**](#ConfidenceLevel)
    **Categories**: Sensing information     **Revision**: _Created in V2.1.1_ ```asn1 ObjectClassWithConfidence ::= SEQUENCE { objectClass ObjectClass, confidence ConfidenceLevel } ``` ### ObjectDimension This DF represents a dimension of an object together with a confidence value. It shall include the following components: Fields: * value [**ObjectDimensionValue**](#ObjectDimensionValue)
the object dimension value which can be estimated as the mean of the current distribution. * confidence [**ObjectDimensionConfidence**](#ObjectDimensionConfidence)
the associated confidence value.     **Categories**: Sensing information     **Revision**: _Created in V2.1.1_ ```asn1 ObjectDimension ::= SEQUENCE { value ObjectDimensionValue, confidence ObjectDimensionConfidence } ``` ### Path This DF represents a path with a set of path points. It shall contain up to `40` [**PathPoint**](#PathPoint). The first PathPoint presents an offset delta position with regards to an external reference position. Each other PathPoint presents an offset delta position and optionally an offset travel time with regards to the previous PathPoint.     **Categories**: GeoReference information Vehicle information     **Revision**: _created in V2.1.1 based on PathHistory_ ```asn1 Path::= SEQUENCE (SIZE(0..40)) OF PathPoint ``` ### PathHistory This DF represents a path history with a set of path points. It shall contain up to `40` [**PathPoint**](#PathPoint). The first PathPoint presents an offset delta position with regards to an external reference position. Each other PathPoint presents an offset delta position and optionally an offset travel time with regards to the previous PathPoint.     **Categories**: GeoReference information Vehicle information     **Revision**: _semantics updated in V2.1.1_ >>> NOTE: this DF is kept for backwards compatibility reasons only. It is recommended to use [**Path**](#Path) instead >>> ```asn1 PathHistory::= SEQUENCE (SIZE(40)) OF PathPoint ``` ### PathPredicted This DF represents a predicted path with a set of path points. It shall contain up to `15` [**PathPoint**](#PathPoint). The first PathPoint presents an offset delta position with regards to an external reference position. Each other PathPoint presents an offset delta position and optionally an offset travel time with regards to the previous PathPoint.     **Categories**: GeoReference information     **Revision**: _created in V2.1.1 based on PathHistory_ ```asn1 PathPredicted::= SEQUENCE (SIZE(0..15,...)) OF PathPointPredicted ``` ### PathPoint This DF defines an offset waypoint position within a path. It shall include the following components: Fields: * pathPosition [**DeltaReferencePosition**](#DeltaReferencePosition)
The waypoint position defined as an offset position with regards to a pre-defined reference position. * pathDeltaTime [**PathDeltaTime**](#PathDeltaTime) OPTIONAL
The optional travel time separated from a waypoint to the predefined reference position.     **Categories**: GeoReference information     **Revision**: _semantics updated in V2.1.1_ ```asn1 PathPoint ::= SEQUENCE { pathPosition DeltaReferencePosition, pathDeltaTime PathDeltaTime OPTIONAL } ``` ### PathPointPredicted This DF defines a predicted offset waypoint position within a path. It shall include the following components: Fields: * deltaLatitude [**DeltaLatitude**](#DeltaLatitude)
an offset latitude with regards to a pre-defined reference position. * deltaLongitude [**DeltaLongitude**](#DeltaLongitude)
an offset longitude with regards to a pre-defined reference position. * horizontalPositionConfidence [**PosConfidenceEllipse**](#PosConfidenceEllipse) OPTIONAL
the confidence value associated to the horizontal geographical position. * deltaAltitude [**DeltaAltitude**](#DeltaAltitude) DEFAULT unavailable
an offset altitude with regards to a pre-defined reference position. * altitudeConfidence [**AltitudeConfidence**](#AltitudeConfidence) DEFAULT unavailable
the confidence value associated to the altitude value of the geographical position. * pathDeltaTime [**DeltaTimeTenthOfSecond**](#DeltaTimeTenthOfSecond)
The travel time separated from the waypoint to the predefined reference position.     **Categories**: GeoReference information     **Revision**: _semantics updated in V2.1.1_ ```asn1 PathPointPredicted::= SEQUENCE { deltaLatitude DeltaLatitude, deltaLongitude DeltaLongitude, horizontalPositionConfidence PosConfidenceEllipse OPTIONAL, deltaAltitude DeltaAltitude DEFAULT unavailable, altitudeConfidence AltitudeConfidence DEFAULT unavailable, pathDeltaTime DeltaTimeTenthOfSecond, ... } ``` ### PerceivedObject This DF contains information about a perceived object including its kinematic state and attitude vector in a pre-defined coordinate system. It shall include the following components: Fields: * objectId [**Identifier2B**](#Identifier2B) OPTIONAL
optional identifier assigned to a detected object. * timeOfMeasurement [**DeltaTimeMilliSecondPosNeg**](#DeltaTimeMilliSecondPosNeg)
the time difference from a reference time to the time of the measurement of the object. Negative values indicate that the provided object state refers to a point in time before the reference time. * position [**CartesianPosition3dWithConfidence**](#CartesianPosition3dWithConfidence)
the position of the geometric centre of the object´s bounding box within the pre-defined coordinate system, with the associated variance. * velocity [**Velocity3dWithConfidence**](#Velocity3dWithConfidence) OPTIONAL
the velocity vector of the object within the pre-defined coordinate system with the associated variance. * acceleration [**Acceleration3dWithConfidence**](#Acceleration3dWithConfidence) OPTIONAL
the acceleration vector of the object within the pre-defined coordinate system with the associated variance. * zAngle [**CartesianAngle**](#CartesianAngle) OPTIONAL
* yAngle [**CartesianAngle**](#CartesianAngle) OPTIONAL
* xAngle [**CartesianAngle**](#CartesianAngle) OPTIONAL
* zAngleVelocity [**CartesianAngularVelocityComponent**](#CartesianAngularVelocityComponent) OPTIONAL
optional angular velocity of the object around the z-axis at the time of measurement, with the associated variance. The angular velocity is measured with positive values considering the object orientation turning around the z-axis using the right-hand rule. * lowerTriangularCorrelationMatrices [**LowerTriangularPositiveSemidefiniteMatrices**](#LowerTriangularPositiveSemidefiniteMatrices) OPTIONAL
optional set of lower triangular correlation matrices for selected components of the provided kinematic state and attitude vector. * objectDimensionZ [**ObjectDimension**](#ObjectDimension) OPTIONAL
optional z-dimension of object bounding box. This dimension shall be measured along the direction of the z-axis after all the rotations have been applied. * objectDimensionY [**ObjectDimension**](#ObjectDimension) OPTIONAL
optional y-dimension of the object bounding box. This dimension shall be measured along the direction of the y-axis after all the rotations have been applied. * objectDimensionX [**ObjectDimension**](#ObjectDimension) OPTIONAL
optional x-dimension of object bounding box. This dimension shall be measured along the direction of the x-axis after all the rotations have been applied. * objectAge [**DeltaTimeMilliSecondPosNeg**](#DeltaTimeMilliSecondPosNeg) (0..1500) OPTIONAL
optional age of the detected and described object, i.e. the difference in time between the moment it has been first detected and the reference time of the message. Value `1500` indicates that the object has been observed for more than 1.5s. * objectPerceptionQuality [**ObjectPerceptionQuality**](#ObjectPerceptionQuality) OPTIONAL
optional confidence associated to the object. * sensorIdList [**SequenceOfIdentifier1B**](#SequenceOfIdentifier1B) OPTIONAL
optional list of sensor-IDs which provided the measurement data. * classification [**ObjectClassDescription**](#ObjectClassDescription) OPTIONAL
optional classification of the described object * mapPosition [**MapPosition**](#MapPosition) OPTIONAL
    **Categories**: Sensing information     **Revision**: _created in V2.1.1_ ```asn1 PerceivedObject ::= SEQUENCE { objectId Identifier2B OPTIONAL, timeOfMeasurement DeltaTimeMilliSecondPosNeg, position CartesianPosition3dWithConfidence, velocity Velocity3dWithConfidence OPTIONAL, acceleration Acceleration3dWithConfidence OPTIONAL, zAngle CartesianAngle OPTIONAL, yAngle CartesianAngle OPTIONAL, xAngle CartesianAngle OPTIONAL, zAngleVelocity CartesianAngularVelocityComponent OPTIONAL, lowerTriangularCorrelationMatrices LowerTriangularPositiveSemidefiniteMatrices OPTIONAL, objectDimensionZ ObjectDimension OPTIONAL, objectDimensionY ObjectDimension OPTIONAL, objectDimensionX ObjectDimension OPTIONAL, objectAge DeltaTimeMilliSecondPosNeg (0..1500) OPTIONAL, objectPerceptionQuality ObjectPerceptionQuality OPTIONAL, sensorIdList SequenceOfIdentifier1B OPTIONAL, classification ObjectClassDescription OPTIONAL, mapPosition MapPosition OPTIONAL, ... } ``` ### PolygonalShape This DF represents the shape of a polygonal area or of a right prism. It shall include the following components: Fields: * shapeReferencePoint [**CartesianPosition3d**](#CartesianPosition3d) OPTIONAL
the optional reference point used for the definition of the shape, relative to an externally specified reference position. If this component is absent, the externally specified reference position represents the shape´s reference point. * polygon [**SequenceOfCartesianPosition3d**](#SequenceOfCartesianPosition3d) (SIZE(3..16,...))
the polygonal area represented by a list of minimum `3` to maximum `16` [**CartesianPosition3d**](#CartesianPosition3d). All nodes of the polygon shall be considered relative to the shape´s reference point. * height [**StandardLength12b**](#StandardLength12b) OPTIONAL
the optional height, present if the shape is a right prism extending in the positive z-axis.     **Categories**: GeoReference information     **Revision**: _created in V2.1.1_ ```asn1 PolygonalShape ::= SEQUENCE { shapeReferencePoint CartesianPosition3d OPTIONAL, polygon SequenceOfCartesianPosition3d (SIZE(3..16,...)), height StandardLength12b OPTIONAL } ``` ### PosConfidenceEllipse This DF indicates the horizontal position confidence ellipse which represents the estimated accuracy with a confidence level of 95 %. The centre of the ellipse shape corresponds to the reference position point for which the position accuracy is evaluated. It shall include the following components: Fields: * semiMajorConfidence [**SemiAxisLength**](#SemiAxisLength)
half of length of the major axis, i.e. distance between the centre point and major axis point of the position accuracy ellipse. * semiMinorConfidence [**SemiAxisLength**](#SemiAxisLength)
half of length of the minor axis, i.e. distance between the centre point and minor axis point of the position accuracy ellipse. * semiMajorOrientation [**HeadingValue**](#HeadingValue)
orientation direction of the ellipse major axis of the position accuracy ellipse with regards to the WGS84 north. The specific WGS84 coordinate system is specified by the corresponding standards applying this DE.     **Categories**: GeoReference information     **Revision**: _V1.3.1_ ```asn1 PosConfidenceEllipse ::= SEQUENCE { semiMajorConfidence SemiAxisLength, semiMinorConfidence SemiAxisLength, semiMajorOrientation HeadingValue } ``` ### PositionConfidenceEllipse This DF indicates the horizontal position confidence ellipse which represents the estimated accuracy with a confidence level of 95 %. The centre of the ellipse shape corresponds to the reference position point for which the position accuracy is evaluated. It shall include the following components: Fields: * semiMajorAxisLength [**SemiAxisLength**](#SemiAxisLength)
half of length of the major axis, i.e. distance between the centre point and major axis point of the position accuracy ellipse. * semiMinorAxisLength [**SemiAxisLength**](#SemiAxisLength)
half of length of the minor axis, i.e. distance between the centre point and minor axis point of the position accuracy ellipse. * semiMajorAxisOrientation [**Wgs84AngleValue**](#Wgs84AngleValue)
orientation direction of the ellipse major axis of the position accuracy ellipse with regards to the WGS84 north. The specific WGS84 coordinate system is specified by the corresponding standards applying this DE.     **Categories**: GeoReference information     **Revision**: _created in V2.1.1 based on @ref PosConfidenceEllipse_ ```asn1 PositionConfidenceEllipse ::= SEQUENCE { semiMajorAxisLength SemiAxisLength, semiMinorAxisLength SemiAxisLength, semiMajorAxisOrientation Wgs84AngleValue } ``` ### PositionOfPillars This DF shall contain a list of distances [**PosPillar**](#PosPillar) that refer to the perpendicular distance between centre of vehicle front bumper and vehicle pillar A, between neighbour pillars until the last pillar of the vehicle. Vehicle pillars refer to the vertical or near vertical support of vehicle, designated respectively as the A, B, C or D and other pillars moving in side profile view from the front to rear. The first value of the DF refers to the perpendicular distance from the centre of vehicle front bumper to vehicle A pillar. The second value refers to the perpendicular distance from the centre position of A pillar to the B pillar of vehicle and so on until the last pillar.     **Categories**: Vehicle information     **Revision**: _V1.3.1_ ```asn1 PositionOfPillars ::= SEQUENCE (SIZE(1..3, ...)) OF PosPillar ``` ### ProtectedCommunicationZone This DF describes a zone of protection inside which the ITS communication should be restricted. It shall include the following components: Fields: * protectedZoneType [**ProtectedZoneType**](#ProtectedZoneType)
type of the protected zone. * expiryTime [**TimestampIts**](#TimestampIts) OPTIONAL
optional time at which the validity of the protected communication zone will expire. * protectedZoneLatitude [**Latitude**](#Latitude)
latitude of the centre point of the protected communication zone. * protectedZoneLongitude [**Longitude**](#Longitude)
longitude of the centre point of the protected communication zone. * protectedZoneRadius [**ProtectedZoneRadius**](#ProtectedZoneRadius) OPTIONAL
optional radius of the protected communication zone in metres. * protectedZoneId [**ProtectedZoneId**](#ProtectedZoneId) OPTIONAL
the optional ID of the protected communication zone.     **Categories**: Infrastructure information Communication information     **Revision**: _revised in V2.1.1 (changed protectedZoneID to protectedZoneId)_ >>> NOTE: A protected communication zone may be defined around a CEN DSRC road side equipment. >>> ```asn1 ProtectedCommunicationZone ::= SEQUENCE { protectedZoneType ProtectedZoneType, expiryTime TimestampIts OPTIONAL, protectedZoneLatitude Latitude, protectedZoneLongitude Longitude, protectedZoneRadius ProtectedZoneRadius OPTIONAL, protectedZoneId ProtectedZoneId OPTIONAL, ... } ``` ### ProtectedCommunicationZonesRSU This DF shall contain a list of [**ProtectedCommunicationZone**](#ProtectedCommunicationZone) provided by a road side ITS-S (Road Side Unit RSU). It may provide up to 16 protected communication zones information.     **Categories**: Infrastructure information Communication information     **Revision**: _V1.3.1_ ```asn1 ProtectedCommunicationZonesRSU ::= SEQUENCE (SIZE(1..16)) OF ProtectedCommunicationZone ``` ### PtActivation This DF represents activation data for real-time systems designed for operations control, traffic light priorities, track switches, barriers, etc. using a range of activation devices equipped in public transport vehicles. The activation of the corresponding equipment is triggered by the approach or passage of a public transport vehicle at a certain point (e.g. a beacon). Today there are different payload variants defined for public transport activation-data. The R09.x is one of the industry standard used by public transport vehicles (e.g. buses, trams) in Europe (e.g. Germany Austria) for controlling traffic lights, barriers, bollards, etc. This DF shall include information like route, course, destination, priority, etc. The R09.x content is defined in VDV recommendation 420 [i.7]. It includes following information: - Priority Request Information (pre-request, request, ready to start) - End of Prioritization procedure - Priority request direction - Public Transport line number - Priority of public transport - Route line identifier of the public transport - Route number identification - Destination of public transport vehicle Other countries may use different message sets defined by the local administration. Fields: * ptActivationType [**PtActivationType**](#PtActivationType)
type of activation. * ptActivationData [**PtActivationData**](#PtActivationData)
    **Categories**: Vehicle information     **Revision**: _V1.3.1_ ```asn1 PtActivation ::= SEQUENCE { ptActivationType PtActivationType, ptActivationData PtActivationData } ``` ### RadialShape This DF describes a radial shape. The triangular or cone-shaped volume is constructed by sweeping the provided range about the reference point between a horizontal start and a horizontal end angle in positive angular direction of the WGS84 coordinate system. A vertical opening angle may be provided in a Cartesian coordinate system with the x-axis located in the North-East plane of the WGS84 coordinate system. The sensor height may be provided to reflect characteristics of sensors mounted at an altitude (e.g. sensors mounted above intersections). It shall include the following components: Fields: * shapeReferencePoint [**CartesianPosition3d**](#CartesianPosition3d) OPTIONAL
the optional reference point used for the definition of the shape, relative to an externally specified reference position. If this component is absent, the externally specified reference position represents the shape´s reference point. * range [**StandardLength12b**](#StandardLength12b)
the radial range of the shape from the shape´s reference point. * stationaryHorizontalOpeningAngleStart [**Wgs84AngleValue**](#Wgs84AngleValue)
the orientation indicating the beginning of the shape's horizontal opening angle in positive angular direction with respect to the WGS84 coordinate system. * stationaryHorizontalOpeningAngleEnd [**Wgs84AngleValue**](#Wgs84AngleValue)
The orientation indicating the end of the shape's horizontal opening angle in positive angular direction with respect to the WGS84 coordinate system. * verticalOpeningAngleStart [**CartesianAngleValue**](#CartesianAngleValue) OPTIONAL
optional orientation indicating the beginning of the shape`s opening angle in positive angular direction of a Cartesian coordinate system with its x-axis located in the north-east plane of the WGS84 coordinate system. * verticalOpeningAngleEnd [**CartesianAngleValue**](#CartesianAngleValue) OPTIONAL
optional orientation indicating the end of the shape's vertical opening angle in positive angular direction of a Cartesian coordinate system with its x-axis located in the north-east plane of the WGS84 coordinate system.     **Categories**: Sensing information     **Revision**: _created in V2.1.1_ ```asn1 RadialShape ::= SEQUENCE { shapeReferencePoint CartesianPosition3d OPTIONAL, range StandardLength12b, stationaryHorizontalOpeningAngleStart Wgs84AngleValue, stationaryHorizontalOpeningAngleEnd Wgs84AngleValue, verticalOpeningAngleStart CartesianAngleValue OPTIONAL, verticalOpeningAngleEnd CartesianAngleValue OPTIONAL } ``` ### RadialShapes This DF describes a list of radial shapes. It shall include the following components: Fields: * refPointId [**Identifier1B**](#Identifier1B)
the identification of the reference point in case of a sensor mounted to trailer. Defaults to ITS ReferencePoint (0). * xCoordinate [**CartesianCoordinateSmall**](#CartesianCoordinateSmall)
the x-coordinate of the offset point. * yCoordinate [**CartesianCoordinateSmall**](#CartesianCoordinateSmall)
the y-coordinate of the offset point. * zCoordinate [**CartesianCoordinateSmall**](#CartesianCoordinateSmall) OPTIONAL
the optional z-coordinate of the offset point. * radialShapesList [**RadialShapesList**](#RadialShapesList)
the list of radial shape details.     **Categories**: Georeference information     **Revision**: _created in V2.1.1_ ```asn1 RadialShapes ::= SEQUENCE { refPointId Identifier1B, xCoordinate CartesianCoordinateSmall, yCoordinate CartesianCoordinateSmall, zCoordinate CartesianCoordinateSmall OPTIONAL, radialShapesList RadialShapesList } ``` ### RadialShapesList The DF contains a list of [**RadialShapeDetails**](#RadialShapeDetails).     **Categories**: Georeference information     **Revision**: _created in V2.1.1_ ```asn1 RadialShapesList ::= SEQUENCE SIZE(1..16,...) OF RadialShapeDetails ``` ### RadialShapeDetails This DF describes a radial shape details. The triangular or cone-shaped volume is constructed by sweeping the provided range about the reference point or about the offset point (if provided) between a horizontal start and a horizontal end angle in positive angular direction of the WGS84 coordinate system. A vertical opening angle may be provided in a Cartesian coordinate system with the x-axis located in the North-East plane of the WGS84 coordinate system. The sensor height may be provided to reflect characteristics of sensors mounted at an altitude (e.g. sensors mounted above intersections). It shall include the following components: Fields: * range [**StandardLength12b**](#StandardLength12b)
the radial range of the sensor from the reference point or sensor point offset. * horizontalOpeningAngleStart [**CartesianAngleValue**](#CartesianAngleValue)
the orientation indicating the beginning of the shape's horizontal opening angle in positive angular direction. * horizontalOpeningAngleEnd [**CartesianAngleValue**](#CartesianAngleValue)
The orientation indicating the end of the shape's horizontal opening angle in positive angular direction. * verticalOpeningAngleStart [**CartesianAngleValue**](#CartesianAngleValue) OPTIONAL
optional orientation indicating the beginning of the shape's vertical opening angle in positive angular direction of a Cartesian coordinate system with its x-axis located in the north-east plane of the WGS84 coordinate system. * verticalOpeningAngleEnd [**CartesianAngleValue**](#CartesianAngleValue) OPTIONAL
optional orientation indicating the end of the shape's vertical opening angle in positive angular direction of a Cartesian coordinate system with its x-axis located in the north-east plane of the WGS84 coordinate system.     **Categories**: Georeference information     **Revision**: _created in V2.1.1_ ```asn1 RadialShapeDetails ::= SEQUENCE { range StandardLength12b, horizontalOpeningAngleStart CartesianAngleValue, horizontalOpeningAngleEnd CartesianAngleValue, verticalOpeningAngleStart CartesianAngleValue OPTIONAL, verticalOpeningAngleEnd CartesianAngleValue OPTIONAL } ``` ### RectangularShape This DF represents the shape of a rectangular area or a right rectangular prism that is centred on a reference position defined outside of the context of this DF. It shall include the following components: Fields: * centerPoint [**CartesianPosition3d**](#CartesianPosition3d) OPTIONAL
represents an optional offset point which the rectangle is centred on with respect to the reference position. * semiLength [**StandardLength12b**](#StandardLength12b)
represents half the length of the rectangle. * semiBreadth [**StandardLength12b**](#StandardLength12b)
represents half the breadth of the rectangle. * orientation [**Wgs84AngleValue**](#Wgs84AngleValue) OPTIONAL
represents the optional orientation of the lenght of the rectangle in the WGS84 coordinate system. The specific WGS84 coordinate system is specified by the corresponding standards applying this DE. * height [**StandardLength12b**](#StandardLength12b) OPTIONAL
represents the optional height, present if the shape is a right rectangular prism with height extending in the positive z-axis.     **Categories**: GeoReference information     **Revision**: _created in V2.1.1_ ```asn1 RectangularShape ::= SEQUENCE { centerPoint CartesianPosition3d OPTIONAL, semiLength StandardLength12b, semiBreadth StandardLength12b, orientation Wgs84AngleValue OPTIONAL, height StandardLength12b OPTIONAL } ``` ### ReferencePosition A position within a geographic coordinate system together with a confidence ellipse. It shall include the following components: Fields: * latitude [**Latitude**](#Latitude)
the latitude of the geographical point. * longitude [**Longitude**](#Longitude)
the longitude of the geographical point. * positionConfidenceEllipse [**PosConfidenceEllipse**](#PosConfidenceEllipse)
the confidence ellipse associated to the geographical position. * altitude [**Altitude**](#Altitude)
the altitude and an altitude accuracy of the geographical point.     **Categories**: GeoReference information     **Revision**: _description updated in V2.1.1_ >>> NOTE: this DE is kept for backwards compatibility reasons only. It is recommended to use the [**ReferencePositionWithConfidence**](#ReferencePositionWithConfidence) instead. >>> ```asn1 ReferencePosition ::= SEQUENCE { latitude Latitude, longitude Longitude, positionConfidenceEllipse PosConfidenceEllipse, altitude Altitude } ``` ### ReferencePositionWithConfidence A position within a geographic coordinate system together with a confidence ellipse. It shall include the following components: Fields: * latitude [**Latitude**](#Latitude)
the latitude of the geographical point. * longitude [**Longitude**](#Longitude)
the longitude of the geographical point. * positionConfidenceEllipse [**PositionConfidenceEllipse**](#PositionConfidenceEllipse)
the confidence ellipse associated to the geographical position. * altitude [**Altitude**](#Altitude)
the altitude and an altitude accuracy of the geographical point.     **Categories**: GeoReference information     **Revision**: _created in V2.1.1 based on @ref ReferencePosition but using @ref PositionConfidenceEllipse._ ```asn1 ReferencePositionWithConfidence ::= SEQUENCE { latitude Latitude, longitude Longitude, positionConfidenceEllipse PositionConfidenceEllipse, altitude Altitude } ``` ### RestrictedTypes This DF shall contain a list of [**StationType**](#StationType). to which a certain traffic restriction, e.g. the speed limit, applies.     **Categories**: Infrastructure information Traffic information     **Revision**: _V1.3.1_ ```asn1 RestrictedTypes ::= SEQUENCE (SIZE(1..3, ...)) OF StationType ``` ### RoadSegmentReferenceId This DF represents a unique id for a road segment It shall include the following components: Fields: * region [**Identifier2B**](#Identifier2B) OPTIONAL
the optional identifier of the entity that is responsible for the region in which the road segment is placed. It is the duty of that entity to guarantee that the [**Id**](#Id) is unique within the region. * id [**Identifier2B**](#Identifier2B)
the identifier of the road segment.     **Categories**: GeoReference information     **Revision**: _created in V2.1.1_ >>> NOTE: when the component region is present, the RoadSegmentReferenceId is guaranteed to be globally unique. >>> ```asn1 RoadSegmentReferenceId ::= SEQUENCE { region Identifier2B OPTIONAL, id Identifier2B } ``` ### SafeDistanceIndication This DF provides the safe distance indication of a traffic participant with other traffic participant(s). It shall include the following components: Fields: * subjectStation [**StationId**](#StationId) OPTIONAL
optionally indicates one "other" traffic participant identified by its ITS-S. * safeDistanceIndicator [**SafeDistanceIndicator**](#SafeDistanceIndicator)
indicates whether the distance between the ego ITS-S and the traffic participant(s) is safe. If subjectStation is present then it indicates whether the distance between the ego ITS-S and the traffic participant indicated in the component subjectStation is safe. * timeToCollision [**DeltaTimeTenthOfSecond**](#DeltaTimeTenthOfSecond) OPTIONAL
optionally indicated the time-to-collision calculated as sqrt(LaDi² + LoDi² + VDi²)/relative speed and represented in the nearest 100 ms. This component may be present only if subjectStation is present.     **Categories**: Traffic information Kinematics information     **Revision**: _created in V2.1.1_ >>> NOTE: the abbreviations used are Lateral Distance (LaD), Longitudinal Distance (LoD) and Vertical Distance (VD) and their respective thresholds, Minimum Safe Lateral Distance (MSLaD), Minimum Safe Longitudinal Distance (MSLoD), and Minimum Safe Vertical Distance (MSVD). >>> ```asn1 SafeDistanceIndication ::= SEQUENCE { subjectStation StationId OPTIONAL, safeDistanceIndicator SafeDistanceIndicator, timeToCollision DeltaTimeTenthOfSecond OPTIONAL, ... } ``` ### SequenceOfCartesianPosition3d This DF shall contain a list of DF [**CartesianPosition3d**](#CartesianPosition3d).     **Categories**: GeoReference information     **Revision**: _created in V2.1.1_ ```asn1 SequenceOfCartesianPosition3d ::= SEQUENCE (SIZE(1..16, ...)) OF CartesianPosition3d ``` ### SequenceOfIdentifier1B The DF contains a list of DE [**Identifier1B**](#Identifier1B).     **Categories**: Basic information     **Revision**: _created in V2.1.1_ ```asn1 SequenceOfIdentifier1B ::= SEQUENCE SIZE(1..128, ...) OF Identifier1B ``` ### SequenceOfSafeDistanceIndication The DF contains a list of DF [**SafeDistanceIndication**](#SafeDistanceIndication).     **Categories**: Traffic information Kinematics information     **Revision**: _created in V2.1.1_ ```asn1 SequenceOfSafeDistanceIndication ::= SEQUENCE(SIZE(1..8,...)) OF SafeDistanceIndication ``` ### SequenceOfTrajectoryInterceptionIndication The DF shall contain a list of DF [**TrajectoryInterceptionIndication**](#TrajectoryInterceptionIndication).     **Categories**: Traffic information Kinematics information     **Revision**: _created in V2.1.1_ ```asn1 SequenceOfTrajectoryInterceptionIndication ::= SEQUENCE (SIZE(1..8,...)) OF TrajectoryInterceptionIndication ``` ### Shape This DF provides the definition of a geographical area or volume, based on different options. It is a choice of the following components: Fields: * rectangular [**RectangularShape**](#RectangularShape)
definition of an rectangular area or a right rectangular prism (with a rectangular base) also called a cuboid, or informally a rectangular box. * circular [**CircularShape**](#CircularShape)
definition of an area of circular shape or a right circular cylinder. * polygonal [**PolygonalShape**](#PolygonalShape)
definition of an area of polygonal shape or a right prism. * elliptical [**EllipticalShape**](#EllipticalShape)
definition of an area of elliptical shape or a right elliptical cylinder. * radial [**RadialShape**](#RadialShape)
definition of a radial shape. * radialShapes [**RadialShapes**](#RadialShapes)
    **Categories**: GeoReference information     **Revision**: _Created in V2.1.1_ ```asn1 Shape::= CHOICE { rectangular RectangularShape, circular CircularShape, polygonal PolygonalShape, elliptical EllipticalShape, radial RadialShape, radialShapes RadialShapes, ... } ``` ### Speed This DF represents the speed and associated confidence value. It shall include the following components: Fields: * speedValue [**SpeedValue**](#SpeedValue)
the speed value. * speedConfidence [**SpeedConfidence**](#SpeedConfidence)
the confidence value of the speed value.     **Categories**: Kinematics information     **Revision**: _V1.3.1_ ```asn1 Speed ::= SEQUENCE { speedValue SpeedValue, speedConfidence SpeedConfidence } ``` ### StabilityChangeIndication This DF provides the indication of change in stability. It shall include the following components: Fields: * lossProbability [**StabilityLossProbability**](#StabilityLossProbability)
the probability of stability loss. * actionDeltaTime [**DeltaTimeTenthOfSecond**](#DeltaTimeTenthOfSecond)
the period over which the the probability of stability loss is estimated.     **Categories**: Kinematics information     **Revision**: _V2.1.1_ ```asn1 StabilityChangeIndication ::= SEQUENCE { lossProbability StabilityLossProbability, actionDeltaTime DeltaTimeTenthOfSecond, ... } ``` ### SteeringWheelAngle This DF represents the steering wheel angle of the vehicle at certain point in time. It shall include the following components: Fields: * steeringWheelAngleValue [**SteeringWheelAngleValue**](#SteeringWheelAngleValue)
steering wheel angle value. * steeringWheelAngleConfidence [**SteeringWheelAngleConfidence**](#SteeringWheelAngleConfidence)
confidence value of the steering wheel angle value.     **Categories**: Vehicle information     **Revision**: _Created in V2.1.1_ ```asn1 SteeringWheelAngle ::= SEQUENCE { steeringWheelAngleValue SteeringWheelAngleValue, steeringWheelAngleConfidence SteeringWheelAngleConfidence } ``` ### Traces This DF represents one or more paths using [**PathHistory**](#PathHistory).     **Categories**: GeoReference information     **Revision**: _Description revised in V2.1.1. Is is now based on Path and not on PathHistory_ ```asn1 Traces ::= SEQUENCE SIZE(1..7) OF Path ``` ### TrafficIslandPosition Ths DF represents the a position on a traffic island between two lanes. It shall include the following components: Fields: * oneSide [**LanePositionAndType**](#LanePositionAndType)
represents one lane. * otherSide [**LanePositionAndType**](#LanePositionAndType)
represents the other lane.     **Categories**: Road Topology information     **Revision**: _Created in V2.1.1_ ```asn1 TrafficIslandPosition ::= SEQUENCE { oneSide LanePositionAndType, otherSide LanePositionAndType, ... } ``` ### TrailerData This DF provides detailed information about an attached trailer. It shall include the following components: Fields: * refPointId [**Identifier1B**](#Identifier1B)
identifier of the reference point of the trailer. * hitchPointOffset [**StandardLength1B**](#StandardLength1B)
optional position of the hitch point in negative x-direction (according to ISO 8855) from the vehicle Reference Point. * frontOverhang [**StandardLength1B**](#StandardLength1B) OPTIONAL
optional length of the trailer overhang in the positive x direction (according to ISO 8855) from the trailer Reference Point indicated by the refPointID. The value defaults to 0 in case the trailer is not overhanging to the front with respect to the trailer reference point. * rearOverhang [**StandardLength1B**](#StandardLength1B) OPTIONAL
optional length of the trailer overhang in the negative x direction (according to ISO 8855) from the trailer Reference Point indicated by the refPointID. * trailerWidth [**VehicleWidth**](#VehicleWidth) OPTIONAL
optional width of the trailer. * hitchAngle [**CartesianAngle**](#CartesianAngle)
optional Value and confidence value of the angle between the trailer orientation (corresponding to the x direction of the ISO 8855 [2] coordinate system centered on the trailer) and the direction of the segment having as end points the reference point of the trailer and the reference point of the pulling vehicle, which can be another trailer or a vehicle looking on the horizontal plane xy, described in the local Cartesian coordinate system of the trailer. The angle is measured with negative values considering the trailer orientation turning clockwise starting from the segment direction. The angle value accuracy is provided with the confidence level of 95 %.     **Categories**: Vehicle information     **Revision**: _Created in V2.1.1_ ```asn1 TrailerData ::= SEQUENCE { refPointId Identifier1B, hitchPointOffset StandardLength1B, frontOverhang StandardLength1B OPTIONAL, rearOverhang StandardLength1B OPTIONAL, trailerWidth VehicleWidth OPTIONAL, hitchAngle CartesianAngle, ... } ``` ### TrajectoryInterceptionIndication This DF provides the trajectory interception indication of ego-VRU ITS-S with another ITS-Ss. It shall include the following components: Fields: * subjectStation [**StationId**](#StationId) OPTIONAL
indicates the subject station. * trajectoryInterceptionProbability [**TrajectoryInterceptionProbability**](#TrajectoryInterceptionProbability)
indicates the propbability of the interception of the subject station trajectory with the trajectory of the station indicated in the component subjectStation. * trajectoryInterceptionConfidence [**TrajectoryInterceptionConfidence**](#TrajectoryInterceptionConfidence) OPTIONAL
indicates the confidence of interception of the subject station trajectory with the trajectory of the station indicated in the component subjectStation.     **Categories**: Vehicle information     **Revision**: _Created in V2.1.1_ ```asn1 TrajectoryInterceptionIndication ::= SEQUENCE { subjectStation StationId OPTIONAL, trajectoryInterceptionProbability TrajectoryInterceptionProbability, trajectoryInterceptionConfidence TrajectoryInterceptionConfidence OPTIONAL, ... } ``` ### VarLengthNumber This DF together with its sub DFs Ext1, Ext2 and the DE Ext3 provides the custom (i.e. not ASN.1 standard) definition of an integer with variable lenght, that can be used for example to encode the ITS-AID.     **Categories**: Vehicle information     **Revision**: _Created in V2.1.1_ ```asn1 VarLengthNumber::=CHOICE{ content [0] INTEGER(0..127), extension [1] Ext1 } Ext1::=CHOICE{ content [0] INTEGER(128..16511), extension [1] Ext2 } Ext2::=CHOICE{ content [0] INTEGER(16512..2113663), extension [1] Ext3 } Ext3::= INTEGER(2113664..270549119,...) ``` ### VerticalAcceleration This DF indicates the vehicle acceleration at vertical direction and the associated confidence value. It shall include the following components: Fields: * verticalAccelerationValue [**VerticalAccelerationValue**](#VerticalAccelerationValue)
vertical acceleration value at a point in time. * verticalAccelerationConfidence [**AccelerationConfidence**](#AccelerationConfidence)
confidence value of the vertical acceleration value with a predefined confidence level.     **Categories**: Vehicle information     **Revision**: _Description revised in V2.1.1_ >>> NOTE: this DF is kept for backwards compatibility reasons only. It is recommended to use [**Acceleration1d**](#Acceleration1d) instead >>> ```asn1 VerticalAcceleration ::= SEQUENCE { verticalAccelerationValue VerticalAccelerationValue, verticalAccelerationConfidence AccelerationConfidence } ``` ### VehicleIdentification This DF provides information related to the identification of a vehicle. It shall include the following components: Fields: * wMInumber [**WMInumber**](#WMInumber) OPTIONAL
World Manufacturer Identifier (WMI) code. * vDS [**VDS**](#VDS) OPTIONAL
Vehicle Descriptor Section (VDS).     **Categories**: Vehicle information     **Revision**: _V1.3.1_ ```asn1 VehicleIdentification ::= SEQUENCE { wMInumber WMInumber OPTIONAL, vDS VDS OPTIONAL, ... } ``` ### VehicleLength This DF represents the length of vehicle and accuracy indication information. It shall include the following components: Fields: * vehicleLengthValue [**VehicleLengthValue**](#VehicleLengthValue)
length of vehicle. * vehicleLengthConfidenceIndication [**VehicleLengthConfidenceIndication**](#VehicleLengthConfidenceIndication)
indication of the length value confidence.     **Categories**: Vehicle information     **Revision**: _V1.3.1_ ```asn1 VehicleLength ::= SEQUENCE { vehicleLengthValue VehicleLengthValue, vehicleLengthConfidenceIndication VehicleLengthConfidenceIndication } ``` ### VehicleLengthV2 This DF represents the length of vehicle and accuracy indication information. It shall include the following components: Fields: * vehicleLengthValue [**VehicleLengthValue**](#VehicleLengthValue)
length of vehicle. * trailerPresenceInformation [**TrailerPresenceInformation**](#TrailerPresenceInformation)
information about the trailer presence.     **Categories**: Vehicle information     **Revision**: _created in V2.1.1 based on @ref VehicleLength but using @ref TrailerPresenceInformation_ ```asn1 VehicleLengthV2 ::= SEQUENCE { vehicleLengthValue VehicleLengthValue, trailerPresenceInformation TrailerPresenceInformation } ``` ### Velocity3dWithConfidence This DF represents a velocity vector with associated confidence value. The following options are available: Fields: * polarVelocity [**VelocityPolarWithZ**](#VelocityPolarWithZ)
the representation of the velocity vector in a polar coordinate system. * cartesianVelocity [**VelocityCartesian**](#VelocityCartesian)
the representation of the velocity vector in a cartesian coordinate system.     **Categories**: Kinematics information     **Revision**: _Created in V2.1.1_ ```asn1 Velocity3dWithConfidence::= CHOICE{ polarVelocity VelocityPolarWithZ, cartesianVelocity VelocityCartesian } ``` ### VelocityCartesian This DF represents a velocity vector in a cartesian coordinate system. It shall include the following components: Fields: * xVelocity [**VelocityComponent**](#VelocityComponent)
the x component of the velocity vector with the associated confidence value. * yVelocity [**VelocityComponent**](#VelocityComponent)
the y component of the velocity vector with the associated confidence value. * zVelocity [**VelocityComponent**](#VelocityComponent) OPTIONAL
the optional z component of the velocity vector with the associated confidence value.     **Categories**: Kinematics information     **Revision**: _Created in V2.1.1_ ```asn1 VelocityCartesian::= SEQUENCE { xVelocity VelocityComponent, yVelocity VelocityComponent, zVelocity VelocityComponent OPTIONAL } ``` ### VelocityComponent This DF represents a component of the velocity vector and the associated confidence value. It shall include the following components: Fields: * value [**VelocityComponentValue**](#VelocityComponentValue)
the value of the component. * confidence [**SpeedConfidence**](#SpeedConfidence)
the confidence value of the value.     **Categories**: Kinematics information     **Revision**: _V2.1.1_ ```asn1 VelocityComponent ::= SEQUENCE { value VelocityComponentValue, confidence SpeedConfidence } ``` ### VelocityPolarWithZ This DF represents a velocity vector in a polar coordinate system. It shall include the following components: Fields: * velocityMagnitude [**Speed**](#Speed)
magnitude of the velocity vector of the detected object in the X-Y plane with the associated confidence value. * velocityDirection [**CartesianAngle**](#CartesianAngle)
polar angle of the velocity vector of the detected object in the X-Y plane with the associated confidence value. * zVelocity [**VelocityComponent**](#VelocityComponent) OPTIONAL
the optional z component of the velocity vector with the associated confidence value.     **Categories**: Kinematics information     **Revision**: _Created in V2.1.1_ ```asn1 VelocityPolarWithZ::= SEQUENCE { velocityMagnitude Speed, velocityDirection CartesianAngle, zVelocity VelocityComponent OPTIONAL } ``` ### VruClusterInformation This DF provides information about a VRU cluster. It shall include the following components: Fields: * clusterId [**Identifier1B**](#Identifier1B) OPTIONAL
optional identifier of a VRU cluster . * clusterBoundingBoxShape [**Shape**](#Shape) (WITH COMPONENTS{..., elliptical ABSENT, radial ABSENT, radialShapes ABSENT}) OPTIONAL
optionally indicates the shape of the cluster bounding box. * clusterCardinalitySize [**CardinalNumber1B**](#CardinalNumber1B)
indicates an estimation of the number of VRUs in the group, i.e. the known members in the cluster + 1 (for the cluster leader) . * clusterProfiles [**VruClusterProfiles**](#VruClusterProfiles) OPTIONAL
optionally identifies all the VRU profile types that are known to be within the cluster. if this component is absent it means that the information is unavailable.     **Categories**: VRU information     **Revision**: _Created in V2.1.1_ ```asn1 VruClusterInformation ::= SEQUENCE { clusterId Identifier1B OPTIONAL, clusterBoundingBoxShape Shape (WITH COMPONENTS{..., elliptical ABSENT, radial ABSENT, radialShapes ABSENT}) OPTIONAL, clusterCardinalitySize CardinalNumber1B, clusterProfiles VruClusterProfiles OPTIONAL, ... } ``` ### VruExteriorLights This DF represents the status of the exterior light switches of a VRU. This DF is an extension of the vehicular DE [**ExteriorLights**](#ExteriorLights). It shall include the following components: Fields: * vehicular [**ExteriorLights**](#ExteriorLights)
represents the status of the exterior light switches of a road vehicle. * vruSpecific [**VruSpecificExteriorLights**](#VruSpecificExteriorLights)
represents the status of the exterior light switches of a VRU.     **Categories**: VRU information     **Revision**: _created in V2.1.1_ ```asn1 VruExteriorLights ::= SEQUENCE { vehicular ExteriorLights, vruSpecific VruSpecificExteriorLights, ... } ``` ### VruProfileAndSubprofile This DF indicates the profile of a VRU including sub-profile information It identifies four options corresponding to the four types of VRU profiles specified in ETSI TS 103 300-2 [i.18]: Fields: * pedestrian [**VruSubProfilePedestrian**](#VruSubProfilePedestrian)
VRU Profile 1 - Pedestrian. * bicyclistAndLightVruVehicle [**VruSubProfileBicyclist**](#VruSubProfileBicyclist)
VRU Profile 2 - Bicyclist. * motorcyclist [**VruSubProfileMotorcyclist**](#VruSubProfileMotorcyclist)
VRU Profile 3 - Motorcyclist. * animal [**VruSubProfileAnimal**](#VruSubProfileAnimal)
VRU Profile 4 - Animal.     **Categories**: VRU information     **Revision**: _Created in V2.1.1_ ```asn1 VruProfileAndSubprofile ::= CHOICE { pedestrian VruSubProfilePedestrian, bicyclistAndLightVruVehicle VruSubProfileBicyclist, motorcyclist VruSubProfileMotorcyclist, animal VruSubProfileAnimal, ... } ``` ### Wgs84Angle This DF represents an angular component along with a confidence value in the WGS84 coordinate system. The specific WGS84 coordinate system is specified by the corresponding standards applying this DE. It shall include the following components: Fields: * value [**Wgs84AngleValue**](#Wgs84AngleValue)
the angle value, which can be estimated as the mean of the current distribution. * confidence [**Wgs84AngleConfidence**](#Wgs84AngleConfidence)
the confidence value associated to the angle value.     **Categories**: GeoReference information     **Revision**: _Created in V2.1.1_ ```asn1 Wgs84Angle ::= SEQUENCE { value Wgs84AngleValue, confidence Wgs84AngleConfidence } ``` ### YawRate This DF represents a yaw rate of vehicle at a point in time. It shall include the following components: Fields: * yawRateValue [**YawRateValue**](#YawRateValue)
yaw rate value at a point in time. * yawRateConfidence [**YawRateConfidence**](#YawRateConfidence)
confidence value associated to the yaw rate value.     **Categories**: Vehicle Information     **Revision**: _V1.3.1_ ```asn1 YawRate::= SEQUENCE { yawRateValue YawRateValue, yawRateConfidence YawRateConfidence } ```