Finalyze first AtsMBR test case

[MODULE_PARAMETERS]

# This section shall contain the values of all parameters that are defined in your TTCN-3 modules.

# The GeoNetworking address of the IUT.

#LibItsGeoNetworking_Pics.PICS_GN_LOCAL_GN_ADDR := {

#  typeOfAddress := e_initial,

#  stationType := e_unknown,

#  reserved := 0,

#  mid := '000000000000'O

#}

LibItsGeoNetworking_Pics.PICS_GN_LOCAL_GN_ADDR := {

  typeOfAddress := e_manual,

  stationType := e_roadSideUnit,

  reserved := 49,

  mid := '001C6B0D0201'O

}

LibItsGeoNetworking_Pixits.PX_GN_UPPER_LAYER := e_btpB

LibItsBtp_Pixits.PX_DESTINATION_PORT := 2001

LibItsBtp_Pixits.PX_DESTINATION_PORT_INFO := 2001

# The certificate identifier the TA shall use in case of secured IUT

#LibItsCommon_Pixits.PX_CERT_FOR_TS := "CERT_IUT_A_AT"

# Enable Security support

LibItsGeoNetworking_Pics.PICS_GN_SECURITY := true

# Root path to access certificate stored in files, identified by certficate ID

LibItsSecurity_Pixits.PX_CERTIFICATE_POOL_PATH := "../data/certificates"

# Configuration sub-directory to access certificate stored in files

LibItsSecurity_Pixits.PX_IUT_SEC_CONFIG_NAME := "certificates"

# The certficate the IUT should use (cf. UtInitialize)

LibItsSecurity_Pixits.PX_IUT_DEFAULT_CERTIFICATE := "CERT_IUT_A_B_AT" #"CERT_IUT_A_AT"

# The certficate the TS should use to generate an ITS message

LibItsSecurity_Pixits.PX_AT_CERTIFICATE := "CERT_TS_B_AT" # Possible values: CERT_TS_C_AT, CERT_TS_D_AT, or CERT_TS_E_AT

#LibItsSecurity_Pics.PICS_SEC_SHA256 := false

#LibItsSecurity_Pics.PICS_SEC_SHA384 := true

[LOGGING]

# In this section you can specify the name of the log file and the classes of events

# you want to log into the file or display on console (standard error).

LogFile := "../logs/AtsSecurity/%e.%h-%r.%s"

FileMask := LOG_ALL | USER | DEBUG | MATCHING

ConsoleMask := LOG_ALL | USER | DEBUG | MATCHING

#FileMask := ERROR | WARNING | USER | PORTEVENT | MATCHING | EXECUTOR_RUNTIME | VERDICTOP | TIMEROP

#ConsoleMask := ERROR | WARNING | USER | PORTEVENT | MATCHING | EXECUTOR_RUNTIME | VERDICTOP | TIMEROP

LogSourceInfo := Stack

LogEntityName:= Yes

LogEventTypes:= Yes

#TimeStampFormat := DateTime

[TESTPORT_PARAMETERS]

# In this section you can specify parameters that are passed to Test Ports.

# CAM Layer

#   next_header     : btpA|btpB (overwrite BTP.type)

#   header_type     : tsb|gbc

#   header_sub_type : sh (single hop)

# DENM Layer

#   next_header     : btpA|btpB (overwrite BTP.type)

#   header_type     : tsb|gbc

# BTP Layer

#   type            : btpA|btpB

#   destination port: dst_port

#   source port     : src_port

#   device_mode     : Set to 1 if the layer shall encapsulate upper layer PDU

#   device_mode     : Set to 1 if the layer shall encapsulate upper layer PDU

# GN Layer

#   ll_address             : GeoNetworking address of the Test System

#   latitude               : latitude of the Test System

#   longitude              : longitude of the Test System

#   beaconing              : Set to 1 if GnLayer shall start beaconing

#   Beaconning timer expiry: expiry (ms)

#   device_mode            : Set to 1 if the layer shall encapsulate upper layer PDU

#   secured_mode           : Set to 1 if message exchanges shall be signed

#   encrypted_mode         : Set to 1 if message exchanges shall be encrypted

#                            NOTE: For signed & encrypted message exchanges, both secured_mode and encrypted_mode shall be set to 1

#   sec_db_path            : Path to the certificates and keys storage location

#   hash                   : Hash algorithm to be used when secured mode is set

#                            Authorized values are SHA-256 or SHA-384

#                            Default: SHA-256

#   cypher                 : Cyphering algorithm to be used when secured mode is set

#                            Authorized values are NISTP-256, BP-256 and BP-384

#                            Default: NISTP-256

# Ethernet layer

#   mac_src  :Source MAC address

#   mac_bc   :Broadcast address

#   eth_type : Ethernet type

# Commsignia layer

#   mac_src     : Device MAC address, used to discard packets

#                 To indicate no filering, use the value 000000000000

#   mac_bc      : Broadcast address

#   eth_type    : Ethernet type, used to discard packets

#   target_host : Device address

#   target_port : Device port

#   source_port : Test System port

#   interface_id: Interface id, used to discard packets

#   tx_power    : TX power (dB)

# UDP layer (IP/UDP based on Pcap)

#   dst_ip  : destination IPv4 address (aa.bb.cc.dd)

#   dst_port: destination port

#   src_ip  : source IPv4 address (aa.bb.cc.dd)

#   src_port: source port

# Pcap layer

#   mac_src    : Source MAC address, used to exclude from capture the acket sent by the Test System

#   filter     : Pcap filter (compliant with tcpdump syntax) 

#   Online mode:

#     nic: Local NIC

#          If set, online mode is used

#   Offline mode (nic is present but not set):

#     file        : File to read

#     frame_offset: Frame offset, used to skip packets with frame number < frame_offset

#     time_offset : Time offset, used to skip packets with time offset < time_offset

#     save_mode   : 1 to save sent packet, 0 otherwise

# Single GeoNetworking component port

# https://standards.iso.org/iso/ts/17419/TS17419%20Assigned%20Numbers/TS17419_ITS-AID_AssignedNumbers.pdf

# its_aid=36:   CAM

# its_aid=37:   DENM

# its_aid=137:  SPAT

# its_aid=138:  MAP

# its_aid=139:  IVIM

# its_aid=140:  SREM/SSEM

# its_aid=141:  GeoMet

# its_aid=128:  RTCMEM

# Cygwin

#system.geoNetworkingPort.params := "GN(ll_address=4C5E0C14D2EA,latitude=43551050,longitude=10298730,distanceA=1500,distanceB=1500,angle=0,device_mode=0,secured_mode=0,sec_db_path=../data/certificates/certificates)/ETH(mac_src=e2b7b30429eb)/PCAP(mac_src=e2b7b30429eb,nic=CEBB111F-D749-4B40-8B4D-DBB060E90987,filter=and ether proto 0x8947)"

# Linux

system.geoNetworkingPort.params := "GN(ll_address=4C5E0C14D2EA,latitude=43551050,longitude=10298730,distanceA=1500,distanceB=1500,angle=0,device_mode=0,secured_mode=0,sec_db_path=../data/certificates/certificates)/ETH(mac_src=8c554ac1eee0)/PCAP(mac_src=8c554ac1eee0,nic=wlp0s20f3,filter=and ether proto 0x8947)"

#system.geoNetworkingPort.params := "GN(ll_address=4C5E0C14D2EB,latitude=43551050,longitude=10298730,distanceA=1500,distanceB=1500,angle=0,device_mode=0,secured_mode=0,its_aid=36)/ETH(mac_src=8c554ac1eee0)/PCAP(mac_src=8c554ac1eee0,nic=wlp0s20f3,filter=and ether proto 0x8947)"

# Linux over UDP

#system.geoNetworkingPort.params := "GN(ll_address=4C5E0C14D2EB,latitude=43551050,longitude=10298730,distanceA=1500,distanceB=1500,angle=0,device_mode=0,secured_mode=0,its_aid=36)/ETH(mac_src=8c554ac1eee0)/UDP(dst_ip=192.168.1.43,src_port=4041,dst_port=9091)"

system.httpPort.params := "HTTP(codecs=http_its:http_etsi_ieee1609dot2_codec)/TCP(debug=1,server_mode=1,server=192.168.1.43)"

system.utMbrPort.params := "UT_MBR/UDP(dst_ip=192.168.1.43,dst_port=12345,src_port=12346)" # Use with TC_SEC_ITSS_RCV_MSG_ test cases

[EXECUTE]

# Check that 

ItsMbr_TestCases.TC_MRS_ITSS_MESSAGES_CLASS1_CAM_001

[MAIN_CONTROLLER]

# The options herein control the behavior of MC.

KillTimer := 10.0

LocalAddress := 127.0.0.1

TCPPort := 12000

NumHCs := 1

Subproject commit 0a28ff34d9ca15d6ed481dad98485210e4d6e179

Subproject commit c4d93f6e22d71386d5a5949ba1bd447e728ea060

Subproject commit f9908ac693ba16f8f99ae01580a3cc7e67433d1c

Subproject commit 98d916828ee948ecefbd9230f30c469ca9c4dffa

echo -e "*****************************\n* Build test suites\n*****************************\n"

cd ${HOME}/dev/TS.ITS

ATS_LIST="AtsCAM AtsDENM AtsGeoNetworking AtsPki AtsSecurity AtsIS"

ATS_LIST="AtsCAM AtsDENM AtsGeoNetworking AtsIS AtsPki AtsSecurity AtsMBR"

for i in ${ATS_LIST}

do

    export ATS=$i