Commit 2fb05d79 authored by Yann Garcia's avatar Yann Garcia
Browse files

Add missing cfg files; Editorial changes in cfg files

parent 29ebfc28

etc/AtsCAM/AtsCAM.cfg

deleted100644 → 0
+1 −168
Original line number Diff line number Diff line 


[MODULE_PARAMETERS]

# This section shall contain the values of all parameters that are defined in your TTCN-3 modules.



# IUT Station ID

LibItsCommon_Pixits.PX_IUT_STATION_ID := 2533729309



LibItsGeoNetworking_Pixits.PX_GN_UPPER_LAYER := e_btpB



LibItsCam_Pics.PICS_DANGEROUSGOODS := true

LibItsCam_Pics.PICS_IS_IUT_SECURED := true



# Instruct the Test System to use this certificate. Comment to use the default one (CERT_IUT_A_AT)

#LibItsCommon_Pixits.PX_CERT_FOR_TS := "CERT_TS_F3_AT" # brainpool384



[LOGGING]

# In this section you can specify the name of the log file and the classes of events

# you want to log into the file or display on console (standard error).



LogFile := "../logs/AtsCAM/%e.%h-%r.%s"

FileMask := LOG_ALL | USER | DEBUG | MATCHING

ConsoleMask := LOG_ALL | USER | DEBUG | MATCHING

#FileMask := ERROR | WARNING | USER | MATCHING | EXECUTOR_RUNTIME | VERDICTOP

#ConsoleMask := ERROR | WARNING | USER | MATCHING | EXECUTOR_RUNTIME | VERDICTOP

LogSourceInfo := Stack

LogEntityName:= Yes

LogEventTypes:= Yes

#TimeStampFormat := DateTime



[TESTPORT_PARAMETERS]

# In this section you can specify parameters that are passed to Test Ports.

# CAM Layer

#   next_header     : btpA|btpB (overwrite BTP.type)

#   header_type     : tsb|gbc

#   header_sub_type : sh (single hop)

# DENM Layer

#   next_header     : btpA|btpB (overwrite BTP.type)

#   header_type     : tsb|gbc

# BTP Layer

#   type            : btpA|btpB

#   destination port: dst_port

#   source port     : src_port

#   device_mode     : Set to 1 if the layer shall encapsulate upper layer PDU

#   device_mode     : Set to 1 if the layer shall encapsulate upper layer PDU

# GN Layer

#   ll_address             : GeoNetworking address of the Test System

#   latitude               : Latitude of the Test System

#   longitude              : Longitude of the Test System

#   beaconing              : Set to 1 if GnLayer shall start beaconing

#   expiry                 : Beaconing timer expiry (ms)

#   device_mode            : Set to 1 if the layer shall encapsulate upper layer PDU

#   secured_mode           : Set to 1 if message exchanges shall be signed

#   encrypted_mode         : Set to 1 if message exchanges shall be encrypted

#                            NOTE: For signed & encrypted message exchanges, both secured_mode and encrypted_mode shall be set to 1

#   sec_db_path            : Path to the certificates and keys storage location

#   hash                   : Hash algorithm to be used when secured mode is set

#                            Authorized values are SHA-256 or SHA-384

#                            Default: SHA-256

#   signature              : Signature algorithm to be used when secured mode is set

#                            Authorized values are NISTP-256, NISTP-384, BP-256 and BP-384

#                            Default: NISTP-256

#   cypher                 : Cyphering algorithm to be used when secured mode is set

#                            Authorized values are NISTP-256, BP-256 and BP-384

#                            Default: NISTP-256

# Ethernet layer

#   mac_src  :Source MAC address

#   mac_bc   :Broadcast address

#   eth_type : Ethernet type

# Commsignia layer

#   mac_src     : IUT MAC address, used to discard packets

#                 To indicate no filering, use the value 000000000000

#   mac_bc      : Broadcast address

#   eth_type    : Ethernet type, used to discard packets

#   target_host : Device address

#   target_port : Device port

#   source_port : Test System port

#   interface_id: Interface id, used to discard packets

#   tx_power    : TX power (dB)

#   xport_mode  : G5 or LTE-V2X

# UDP layer (IP/UDP based on Pcap)

#   dst_ip  : Destination IPv4 address (aa.bb.cc.dd)

#   dst_port: Destination port

#   src_ip  : Source IPv4 address (aa.bb.cc.dd)

#   src_port: Source port

# Pcap layer

#   mac_src    : Source MAC address, used to exclude from capture the acket sent by the Test System

#   filter     : Pcap filter (compliant with tcpdump syntax) 

#   Online mode:

#     nic: Local NIC

#          If set, online mode is used

#   Offline mode (nic is present but not set):

#     file        : File to read

#     frame_offset: Frame offset, used to skip packets with frame number < frame_offset

#     time_offset : Time offset, used to skip packets with time offset < time_offset

#     save_mode   : Set to 1 to save sent packet, 0 otherwise



# Cygwin

#system.camPort.params := "CAM(next_header=btpB,header_type=tsb,header_sub_type=sh)/BTP/GN(ll_address=4C5E0C14D2EA,latitude=43551050,longitude=10298730,distanceA=1500,distanceB=1500,angle=0,device_mode=1,secured_mode=0,sec_db_path=../data/certificates/certificates)/ETH(mac_src=e2b7b30429eb)/PCAP(mac_src=e2b7b30429eb,nic=CEBB111F-D749-4B40-8B4D-DBB060E90987,filter=and ether proto 0x8947)"

# Linux

#system.camPort.params := "CAM(next_header=btpB,header_type=tsb,header_sub_type=sh)/BTP/GN(ll_address=4C5E0C14D2EA,latitude=43551050,longitude=10298730,distanceA=1500,distanceB=1500,angle=0,device_mode=1,secured_mode=1,sec_db_path=../data/certificates/certificates)/ETH(mac_src=dc536045af7e)/PCAP(mac_src=dc536045af7e,nic=wlo1,filter=and ether proto 0x8947)"

#system.camPort.params := "CAM(next_header=btpB,header_type=tsb,header_sub_type=sh)/BTP/GN(ll_address=4C5E0C14D2EA,latitude=43551050,longitude=10298730,distanceA=1500,distanceB=1500,angle=0,device_mode=1,secured_mode=1,sec_db_path=../data/certificates/certificates)/ETH(mac_src=dc536045af7e)/PCAP(mac_src=dc536045af7e,nic=tun0,filter=and ether proto 0x8947)"

# Linux over UDP

#system.camPort.params := "CAM(next_header=btpB,header_type=tsb,header_sub_type=sh)/BTP/GN(ll_address=4C5E0C14D2EA,latitude=43551050,longitude=10298730,distanceA=1500,distanceB=1500,angle=0,device_mode=1,secured_mode=0,sec_db_path=../data/certificates/certificates)/ETH(mac_src=dc536045af7e)/UDP(dst_ip=192.168.146.26,src_port=4041,dst_port=9091)"

# Linux over LTE/MQTT

system.camPort.params := "CAM(next_header=btpB,header_type=tsb,header_sub_type=sh)/BTP/GN(ll_address=4C5E0C14D2EA,latitude=43551050,longitude=10298730,distanceA=1500,distanceB=1500,angle=0,device_mode=1,secured_mode=1,sec_db_path=../data/certificates/certificates)/LTE(mac_src=dc536045af7e,nic=wlo1,filter=and ether proto 0x8947,pc5_layer=QUALCOMM,uu_protocol=mqtt,mqtt_client_id=8c554ac1eee2,mqtt_topics=obu,uu_transport=tcp,debug=1,server=127.0.0.1,port=1883)"



# CAM UpperTester port based on UDP

system.utPort.params := "UT_CAM/UDP(dst_ip=127.0.0.1,dst_port=12345,src_port=12346)"

#system.utPort.params := "UT_CAM/UDP(dst_ip=192.168.146.26)"

#system.utPort.params := "UT_CAM/UDP(dst_ip=10.8.0.6)"



[EXECUTE]

ItsCam_TestCases.TC_CAM_MSD_FMT_BV_01

#ItsCam_TestCases.TC_CAM_MSD_FMT_BV_02

#ItsCam_TestCases.TC_CAM_MSD_FMT_BV_03

#ItsCam_TestCases.TC_CAM_MSD_FMT_BV_04

#ItsCam_TestCases.TC_CAM_MSD_FMT_BV_05

#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_01

#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_02

#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_03

#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_04

#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_05

#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_06

#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_07

#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_08

#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_09

#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_10

#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_11

#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_12

#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_13

#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_14

#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_15

#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_16

#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_17

#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_18

#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_19

#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_20

#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_21

#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_22

#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_23

#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_24

#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_25

#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_26

#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_27

#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_28

#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_29

#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_30

#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_31

#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_32

#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_33

#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_34

#ItsCam_TestCases.TC_CAM_MSD_INA_BV_01_35

#ItsCam_TestCases.TC_CAM_MSD_INA_BV_02

#ItsCam_TestCases.TC_CAM_MSD_INA_BV_03

#ItsCam_TestCases.TC_CAM_MSD_INA_BV_04

#ItsCam_TestCases.TC_CAM_MSD_INA_BV_05

#ItsCam_TestCases.TC_CAM_MSD_INA_BV_06

#ItsCam_TestCases.TC_CAM_MSD_INA_BV_07

#ItsCam_TestCases.TC_CAM_MSD_INA_BV_08

#ItsCam_TestCases.TC_CAM_MSD_SSP_BO_02

#ItsCam_TestCases.TC_CAM_MSP_BV_01



[MAIN_CONTROLLER]

# The options herein control the behavior of MC.

KillTimer := 10.0

LocalAddress := 127.0.0.1

TCPPort := 12000

NumHCs := 1

etc/AtsCAM/AtsCAM.cfg

0 → 120000
+1 −168
Original line number Diff line number Diff line 
AtsCAM_nfiniity.cfg_
 
 No newline at end of file

etc/AtsCAM/AtsCAM_Savary.cfg_

+3 −4
Original line number Diff line number Diff line
@@ -38,7 +38,6 @@ LogEventTypes:= Yes 
#   destination port: dst_port

#   source port     : src_port

#   device_mode     : Set to 1 if the layer shall encapsulate upper layer PDU

#   device_mode     : Set to 1 if the layer shall encapsulate upper layer PDU

# GN Layer

#   ll_address             : GeoNetworking address of the Test System

#   latitude               : Latitude of the Test System
@@ -91,8 +90,8 @@ LogEventTypes:= Yes 
#     time_offset : Time offset, used to skip packets with time offset < time_offset

#     save_mode   : Set to 1 to save sent packet, 0 otherwise



#system.camPort.params := "CAM(next_header=btpB,header_type=tsb,header_sub_type=sh)/BTP/GN(ll_address=4C5E0C14D2EA,latitude=43551050,longitude=10298730,distanceA=1500,distanceB=1500,angle=0,device_mode=1,secured_mode=1,sec_db_path=../data/certificates/certificates)/ETH(mac_src=4e685195ff0a)/PCAP(mac_src=ce550426c7e4,nic=tap0,filter=and ether proto 0x8947)"

system.camPort.params := "CAM(next_header=btpB,header_type=tsb,header_sub_type=sh)/BTP/GN(ll_address=4C5E0C14D2EA,latitude=43551050,longitude=10298730,distanceA=1500,distanceB=1500,angle=0,device_mode=1,secured_mode=1,sec_db_path=../data/certificates/certificates)/ETH(mac_src=f8cab8083918)/PCAP(mac_src=f8cab8083918,nic=eno1,filter=and ether proto 0x8947)"

#system.camPort.params := "CAM(next_header=btpB,header_type=tsb,header_sub_type=sh)/BTP/GN(ll_address=4C5E0C14D2EA,latitude=367470520,longitude=-455595024,distanceA=1500,distanceB=1500,angle=0,device_mode=1,secured_mode=1,sec_db_path=../data/certificates/certificates)/ETH(mac_src=4e685195ff0a)/PCAP(mac_src=ce550426c7e4,nic=tap0,filter=and ether proto 0x8947)"

system.camPort.params := "CAM(next_header=btpB,header_type=tsb,header_sub_type=sh)/BTP/GN(ll_address=4C5E0C14D2EA,latitude=367470520,longitude=-455595024,distanceA=1500,distanceB=1500,angle=0,device_mode=1,secured_mode=1,sec_db_path=../data/certificates/certificates)/ETH(mac_src=f8cab8083918)/PCAP(mac_src=f8cab8083918,nic=eno1,filter=and ether proto 0x8947)"



# CAM UpperTester port based on UDP

#system.utPort.params := "UT_CAM/UDP(dst_ip=192.168.20.142,src_port=12345)"

etc/AtsCAM/AtsCAM_Simulator.cfg_

+11 −12
Original line number Diff line number Diff line
@@ -37,7 +37,6 @@ LogEventTypes:= Yes 
#   destination port: dst_port

#   source port     : src_port

#   device_mode     : Set to 1 if the layer shall encapsulate upper layer PDU

#   device_mode     : Set to 1 if the layer shall encapsulate upper layer PDU

# GN Layer

#   ll_address             : GeoNetworking address of the Test System for beaconing. To be align with CAM

#   latitude               : Latitude of the Test System
@@ -88,28 +87,28 @@ LogEventTypes:= Yes 
#     save_mode   : Set to 1 to save sent packet, 0 otherwise



# Cygwin

#system.camPort.params := "CAM(next_header=btpB,header_type=tsb,header_sub_type=sh)/BTP/GN(ll_address=4C5E0C14D2EA,latitude=515340240,longitude=139274330,distanceA=1500,distanceB=1500,angle=0,device_mode=1,secured_mode=1,sec_db_path=../data/certificates/certificates)/ETH(mac_src=e2b7b30429eb)/PCAP(mac_src=e2b7b30429eb,nic=CEBB111F-D749-4B40-8B4D-DBB060E90987,filter=and ether proto 0x8947)"

#system.camPort.params := "CAM(next_header=btpB,header_type=tsb,header_sub_type=sh)/BTP/GN(ll_address=4C5E0C14D2EA,latitude=367470520,longitude=-455595024,distanceA=1500,distanceB=1500,angle=0,device_mode=1,secured_mode=1,sec_db_path=../data/certificates/certificates)/ETH(mac_src=e2b7b30429eb)/PCAP(mac_src=e2b7b30429eb,nic=CEBB111F-D749-4B40-8B4D-DBB060E90987,filter=and ether proto 0x8947)"

# Linux

system.camPort.params := "CAM(next_header=btpB,header_type=tsb,header_sub_type=sh)/BTP/GN(ll_address=4C5E0C14D2EA,latitude=515340240,longitude=139274330,distanceA=1500,distanceB=1500,angle=0,device_mode=1,secured_mode=1,sec_db_path=../data/certificates/certificates)/ETH(mac_src=8c554ac1eee0)/PCAP(mac_src=8c554ac1eee0,nic=wlp0s20f3,filter=and ether proto 0x8947)"

system.camPort.params := "CAM(next_header=btpB,header_type=tsb,header_sub_type=sh)/BTP/GN(ll_address=4C5E0C14D2EA,latitude=367470520,longitude=-455595024,distanceA=1500,distanceB=1500,angle=0,device_mode=1,secured_mode=1,sec_db_path=../data/certificates/certificates)/ETH(mac_src=8c554ac1eee0)/PCAP(mac_src=8c554ac1eee0,nic=wlp0s20f3,filter=and ether proto 0x8947)"

# Linux over UDP

#system.camPort.params := "CAM(next_header=btpB,header_type=tsb,header_sub_type=sh)/BTP/GN(ll_address=4C5E0C14D2EA,latitude=515340240,longitude=139274330,distanceA=1500,distanceB=1500,angle=0,device_mode=1,secured_mode=1,sec_db_path=../data/certificates/certificates)/ETH(mac_src=8c554ac1eee0)/UDP(dst_ip=192.168.1.43,src_port=4041,dst_port=9091)"

#system.camPort.params := "CAM(next_header=btpB,header_type=tsb,header_sub_type=sh)/BTP/GN(ll_address=4C5E0C14D2EA,latitude=367470520,longitude=-455595024,distanceA=1500,distanceB=1500,angle=0,device_mode=1,secured_mode=1,sec_db_path=../data/certificates/certificates)/UDP(dst_ip=192.168.1.43,src_port=4041,dst_port=9091)"



# PC5 + UU/Raw

#system.geoNetworkingPort.params := "GN(ll_address=4C5E0C14D2EB,latitude=515340240,longitude=139274330,its_aid=36,secured_mode=1,certificate=CERT_IUT_A_AT,sec_db_path=../data/certificates/certificates_iut)/LTE(mac_src=8c554ac1eee1,nic=wlp0s20f3,filter=and ether proto 0x8947,pc5_layer=QUALCOMM,uu_protocol=raw,uu_transport=udp,dst_ip=192.168.1.43,dst_port=4041,src_port=9091)"

#system.geoNetworkingPort.params := "GN(ll_address=4C5E0C14D2EB,latitude=367470520,longitude=-455595024,its_aid=36,secured_mode=1,certificate=CERT_IUT_A_AT,sec_db_path=../data/certificates/certificates_iut)/LTE(mac_src=8c554ac1eee1,nic=wlp0s20f3,filter=and ether proto 0x8947,pc5_layer=QUALCOMM,uu_protocol=raw,uu_transport=udp,dst_ip=192.168.1.43,dst_port=4041,src_port=9091)"

# PC5 + Uu/MQTT

#   Raw UDP

#system.camPort.params := "CAM(next_header=btpB,header_type=tsb,header_sub_type=sh)/BTP/GN(ll_address=4C5E0C14D2EA,latitude=515340240,longitude=139274330,distanceA=1500,distanceB=1500,angle=0,device_mode=1,secured_mode=1,sec_db_path=../data/certificates/certificates)/LTE(mac_src=8c554ac1eee0,nic=wlp0s20f3,filter=and ether proto 0x8947,pc5_layer=QUALCOMM,uu_protocol=mqtt,mqtt_client_id=8c554ac1eee0,mqtt_topics=rsu,uu_transport=udp,debug=1,server=192.168.1.39,port=1883)"

#system.camPort.params := "CAM(next_header=btpB,header_type=tsb,header_sub_type=sh)/BTP/GN(ll_address=4C5E0C14D2EA,latitude=367470520,longitude=-455595024,distanceA=1500,distanceB=1500,angle=0,device_mode=1,secured_mode=1,sec_db_path=../data/certificates/certificates)/LTE(mac_src=8c554ac1eee0,nic=wlp0s20f3,filter=and ether proto 0x8947,pc5_layer=QUALCOMM,uu_protocol=mqtt,mqtt_client_id=8c554ac1eee0,mqtt_topics=rsu,uu_transport=udp,debug=1,server=192.168.1.39,port=1883)"

#   MQTT over TCP

#system.camPort.params := "CAM(next_header=btpB,header_type=tsb,header_sub_type=sh)/BTP/GN(ll_address=4C5E0C14D2EA,latitude=515340240,longitude=139274330,distanceA=1500,distanceB=1500,angle=0,device_mode=1,secured_mode=1,sec_db_path=../data/certificates/certificates)/LTE(mac_src=8c554ac1eee0,nic=wlp0s20f3,filter=and ether proto 0x8947,pc5_layer=QUALCOMM,uu_protocol=mqtt,mqtt_client_id=8c554ac1eee0,mqtt_topics=rsu,uu_transport=tcp,debug=1,server=192.168.1.39,port=1883)"

#system.camPort.params := "CAM(next_header=btpB,header_type=tsb,header_sub_type=sh)/BTP/GN(ll_address=4C5E0C14D2EA,latitude=367470520,longitude=-455595024,distanceA=1500,distanceB=1500,angle=0,device_mode=1,secured_mode=1,sec_db_path=../data/certificates/certificates)/LTE(mac_src=8c554ac1eee0,nic=wlp0s20f3,filter=and ether proto 0x8947,pc5_layer=QUALCOMM,uu_protocol=mqtt,mqtt_client_id=8c554ac1eee0,mqtt_topics=rsu,uu_transport=tcp,debug=1,server=192.168.1.39,port=1883)"



# CAM UpperTester port based on UDP

system.utPort.params := "UT_CAM/UDP(dst_ip=192.168.1.43,dst_port=12345,src_port=12346)"

system.utPort.params := "UT_CAM/UDP(dst_ip=192.168.1.21,dst_port=12345,src_port=12346)"

#system.utPort.params := "UT_CAM/UDP(dst_ip=192.168.146.26)"

#system.utPort.params := "UT_CAM/UDP(dst_ip=172.16.35.1)"



[EXECUTE]

#ItsCam_TestCases.TC_CAM_MSD_FMT_BV_01

ItsCam_TestCases.TC_CAM_MSD_FMT_BV_02

ItsCam_TestCases.TC_CAM_MSD_FMT_BV_01

#ItsCam_TestCases.TC_CAM_MSD_FMT_BV_02

#ItsCam_TestCases.TC_CAM_MSD_FMT_BV_03

#ItsCam_TestCases.TC_CAM_MSD_FMT_BV_04

#ItsCam_TestCases.TC_CAM_MSD_FMT_BV_05

etc/AtsCAM/AtsCAM_Yogoko.cf_

+5 −5
Original line number Diff line number Diff line
@@ -92,12 +92,12 @@ LogEventTypes:= Yes 
#     save_mode   : Set to 1 to save sent packet, 0 otherwise



# Cygwin

#system.camPort.params := "CAM(next_header=btpB,header_type=tsb,header_sub_type=sh)/BTP/GN(ll_address=4C5E0C14D2EA,latitude=43551050,longitude=10298730,distanceA=1500,distanceB=1500,angle=0,device_mode=1,secured_mode=0,sec_db_path=../data/certificates/certificates)/ETH(mac_src=e2b7b30429eb)/PCAP(mac_src=e2b7b30429eb,nic=CEBB111F-D749-4B40-8B4D-DBB060E90987,filter=and ether proto 0x8947)"

#system.camPort.params := "CAM(next_header=btpB,header_type=tsb,header_sub_type=sh)/BTP/GN(ll_address=4C5E0C14D2EA,latitude=367470520,longitude=-455595024,distanceA=1500,distanceB=1500,angle=0,device_mode=1,secured_mode=0,sec_db_path=../data/certificates/certificates)/ETH(mac_src=e2b7b30429eb)/PCAP(mac_src=e2b7b30429eb,nic=CEBB111F-D749-4B40-8B4D-DBB060E90987,filter=and ether proto 0x8947)"

# Linux

#system.camPort.params := "CAM(next_header=btpB,header_type=tsb,header_sub_type=sh)/BTP/GN(ll_address=4C5E0C14D2EA,latitude=43551050,longitude=10298730,distanceA=1500,distanceB=1500,angle=0,device_mode=1,secured_mode=1,sec_db_path=../data/certificates/certificates)/ETH(mac_src=dc536045af7e)/PCAP(mac_src=dc536045af7e,nic=wlp2s0,filter=and ether proto 0x8947)"

#system.camPort.params := "CAM(next_header=btpB,header_type=tsb,header_sub_type=sh)/BTP/GN(ll_address=4C5E0C14D2EA,latitude=367470520,longitude=-455595024,distanceA=1500,distanceB=1500,angle=0,device_mode=1,secured_mode=1,sec_db_path=../data/certificates/certificates)/ETH(mac_src=dc536045af7e)/PCAP(mac_src=dc536045af7e,nic=wlp2s0,filter=and ether proto 0x8947)"

# Linux over UDP

#system.camPort.params := "CAM(next_header=btpB,header_type=tsb,header_sub_type=sh)/BTP/GN(ll_address=4C5E0C14D2EA,latitude=43551050,longitude=10298730,distanceA=1500,distanceB=1500,angle=0,device_mode=1,secured_mode=0,sec_db_path=../data/certificates/certificates)/ETH(mac_src=dc536045af7e)/UDP(dst_ip=192.168.146.26,src_port=4041,dst_port=9091)"

system.camPort.params := "CAM(next_header=btpB,header_type=tsb,header_sub_type=sh)/BTP/GN(ll_address=4C5E0C14D2EA,latitude=43551050,longitude=10298730,distanceA=1500,distanceB=1500,angle=0,device_mode=1,secured_mode=1,sec_db_path=../data/certificates/certificates)/ETH(mac_src=dc536045af7e)/PCAP(mac_src=dc536045af7e,nic=tun0,filter=and ether proto 0x8947)"

#system.camPort.params := "CAM(next_header=btpB,header_type=tsb,header_sub_type=sh)/BTP/GN(ll_address=4C5E0C14D2EA,latitude=367470520,longitude=-455595024,distanceA=1500,distanceB=1500,angle=0,device_mode=1,secured_mode=0,sec_db_path=../data/certificates/certificates)/ETH(mac_src=dc536045af7e)/UDP(dst_ip=192.168.146.26,src_port=4041,dst_port=9091)"

system.camPort.params := "CAM(next_header=btpB,header_type=tsb,header_sub_type=sh)/BTP/GN(ll_address=4C5E0C14D2EA,latitude=367470520,longitude=-455595024,distanceA=1500,distanceB=1500,angle=0,device_mode=1,secured_mode=1,sec_db_path=../data/certificates/certificates)/ETH(mac_src=dc536045af7e)/PCAP(mac_src=dc536045af7e,nic=tun0,filter=and ether proto 0x8947)"



# CAM UpperTester port based on UDP

#system.utPort.params := "UT_CAM/UDP(dst_ip=127.0.0.1,dst_port=12345,src_port=12346)"