[MODULE_PARAMETERS]
# This section shall contain the values of all parameters that are defined in your TTCN-3 modules.

# The GeoNetworking address of the IUT.
LibItsGeoNetworking_Pics.PICS_GN_LOCAL_GN_ADDR := {                                                                                                           typeOfAddress := e_manual,
  stationType := e_passengerCar,
  stationCountryCode := 0,
  mid := '000000000001'O
#  typeOfAddress := e_initial,
#  stationType := e_unknown, #e_roadSideUnit,
#  stationCountryCode := 0, #33,
#  mid := '4C5E0C14D2EA'O
}

LibItsGeoNetworking_Pixits.PX_GN_UPPER_LAYER := e_btpB
LibItsGeoNetworking_Pixits.PX_NEIGHBOUR_DISCOVERY_DELAY := 2.0

LibItsHttp_Pics.PICS_HEADER_CONTENT_TYPE := "application/x-its-request"

# Gemalto
#LibItsHttp_Pics.PICS_HEADER_HOST := "etsi.ea.msi-dev.acloud.gemalto.com"
#LibItsPki_Pics.PICS_HTTP_POST_URI := "/"

# httpbin.org
LibItsHttp_Pics.PICS_HEADER_HOST := "httpbin.org"
LibItsPki_Pics.PICS_HTTP_POST_URI := "/its"
LibItsSecurity_Pics.PICS_SEC_FIXED_KEYS := true # Seed

# Enable Security support
LibItsGeoNetworking_Pics.PICS_GN_SECURITY := true
# Root path to access certificate stored in files, identified by certficate ID
LibItsSecurity_Pixits.PX_CERTIFICATE_POOL_PATH := "/home/vagrant/tmp"
# Configuration sub-directory to access certificate stored in files
LibItsSecurity_Pixits.PX_IUT_SEC_CONFIG_NAME := "asn1c_cert"


[LOGGING]
# In this section you can specify the name of the log file and the classes of events
# you want to log into the file or display on console (standard error).

LogFile := "../logs/%e.%h-%r.%s"
FileMask := LOG_ALL | USER | DEBUG | MATCHING
ConsoleMask := LOG_ALL | USER | DEBUG | MATCHING
#FileMask := ERROR | WARNING | USER | MATCHING | EXECUTOR_RUNTIME | VERDICTOP
#ConsoleMask := ERROR | WARNING | USER | MATCHING | EXECUTOR_RUNTIME | VERDICTOP
LogSourceInfo := Stack
LogEntityName:= Yes
LogEventTypes:= Yes
#TimeStampFormat := DateTime

[TESTPORT_PARAMETERS]
# In this section you can specify parameters that are passed to Test Ports.
# CAM Layer
#   next_header     : btpA|btpB (overwrite BTP.type)
#   header_type     : tsb|gbc
#   header_sub_type : sh (single hop)
# DENM Layer
#   next_header     : btpA|btpB (overwrite BTP.type)
#   header_type     : tsb|gbc
# BTP Layer
#   type            : btpA|btpB
#   destination port: dst_port
#   source port     : src_port
#   device_mode     : Set to 1 if the layer shall encapsulate upper layer PDU
#   device_mode     : Set to 1 if the layer shall encapsulate upper layer PDU
# GN Layer
#   ll_address             : GeoNetworking address of the Test System
#   latitude               : latitude of the Test System
#   longitude              : longitude of the Test System
#   beaconing              : Set to 1 if GnLayer shall start beaconing
#   Beaconing timer expiry: expiry (ms)
#   device_mode            : Set to 1 if the layer shall encapsulate upper layer PDU
#   secured_mode           : Set to 1 if message exchanges shall be signed
#   encrypted_mode         : Set to 1 if message exchanges shall be encrypted
#                            NOTE: For signed & encrypted message exchanges, both secured_mode and encrypted_mode shall be set to 1
#   sec_db_path            : Path to the certificates and keys storage location
#   hash                   : Hash algorithm to be used when secured mode is set
#                            Authorized values are SHA-256 or SHA-384
#                            Default: SHA-256
#   signature              : Signature algorithm to be used when secured mode is set
#                            Authorized values are NISTP-256, NISTP-384, BP-256 and BP-384
#                            Default: NISTP-256
#   cypher                 : Cyphering algorithm to be used when secured mode is set
#                            Authorized values are NISTP-256, BP-256 and BP-384
#                            Default: NISTP-256
# Pki layer
#   certificate            : Certificate to be used by the Test System for signature and encryption. Default: CERT_TS_A_AT
#   peer_certificate       : Certificate to be used by the IUT for signature and encryption. Default: CERT_IUT_A_AT
# Ethernet layer
#   mac_src  :Source MAC address
#   mac_bc   :Broadcast address
#   eth_type : Ethernet type
# Commsignia layer
#   mac_src     : Device MAC address, used to discard packets
#                 To indicate no filering, use the value 000000000000
#   mac_bc      : Broadcast address
#   eth_type    : Ethernet type, used to discard packets
#   target_host : Device address
#   target_port : Device port
#   source_port : Test System port
#   interface_id: Interface id, used to discard packets
#   tx_power    : TX power (dB)
# UDP layer (IP/UDP based on Pcap)
#   dst_ip  : destination IPv4 address (aa.bb.cc.dd)
#   dst_port: destination port
#   src_ip  : source IPv4 address (aa.bb.cc.dd)
#   src_port: source port
# Pcap layer
#   mac_src    : Source MAC address, used to exclude from capture the acket sent by the Test System
#   filter     : Pcap filter (compliant with tcpdump syntax) 
#   Online mode:
#     nic: Local NIC
#          If set, online mode is used
#   Offline mode (nic is present but not set):
#     file        : File to read
#     frame_offset: Frame offset, used to skip packets with frame number < frame_offset
#     time_offset : Time offset, used to skip packets with time offset < time_offset
#     save_mode   : 1 to save sent packet, 0 otherwise

# Single GeoNetworking component port
system.geoNetworkingPort.params := "GN(ll_address=4C5E0C14D2EA,latitude=43551050,longitude=10298730)/ETH(mac_src=080027500f9b)/PCAP(mac_src=080027500f9b,nic=eth2)"
system.httpPort.params := "HTTP(codecs=http_its:http_etsi_ieee1609dot2_codec)/TCP(server=75.75.74.66,port=8000,use_ssl=0)" # httpbin.org
#system.httpPort.params := "HTTP(codecs=http_its:http_etsi_ieee1609dot2_codec)/TCP(server=52.85.200.75,port=80,use_ssl=0)" # Gemalto
#system.httpPort.params := "HTTP(codecs=http_its:http_etsi_ieee1609dot2_codec)/TCP(server=etsi.ea.msi-dev.acloud.gemalto.com,port=80,use_ssl=0)" # Gemalto

# GeoNetworking UpperTester port based on UDP
system.utPort.params := "UT_PKI/UDP(dst_ip=172.23.0.1,dst_port=8000)"

[EXECUTE]
#ItsPki_TestCases.TC_SEC_PKI_ITSS_ENR_BV_01
#ItsPki_TestCases.TC_SEC_PKI_ITSS_ENR_BV_02
#ItsPki_TestCases.TC_SEC_PKI_SND_EA_BV_01
#ItsPki_TestCases.TC_SEC_PKI_SND_EA_BV_02
#ItsPki_TestCases.TC_SEC_PKI_SND_EA_BV_03
#ItsPki_TestCases.TC_SEC_PKI_SND_EA_BV_04
#ItsPki_TestCases.TC_SEC_PKI_SND_EA_BV_05
#ItsPki_TestCases.TC_SEC_PKI_SND_EA_BV_06
#ItsPki_TestCases.TC_SEC_PKI_SND_EA_BV_07
#ItsPki_TestCases.TC_SEC_PKI_SND_EA_BV_08
#ItsPki_TestCases.TC_SEC_PKI_SND_EA_BV_09
#ItsPki_TestCases.TC_SEC_PKI_SND_EA_BV_10
#ItsPki_TestCases.TC_SEC_PKI_SND_EA_BV_11
#ItsPki_TestCases.TC_SEC_PKI_SND_EA_BV_12

ItsPki_TestCases.TC_SEC_PKI_SND_AA_BV_00


[MAIN_CONTROLLER]
# The options herein control the behavior of MC.
KillTimer := 10.0
LocalAddress := 127.0.0.1
TCPPort := 12000
NumHCs := 1