# Debug level - Authorized values: OFF, ALL, INFO, SEVERE
DEBUG_ENABLED=OFF
# Define the port/layer configuration for CAM
camPort=BTP/GN/ETH
#camPort=BTP/GN/UdpIpCSG
#camPort=BTP/GN/CSG
#camPort=BTP/GN/UdpIpMarben
# Define the port/layer configuration for DENM
denmPort=BTP/GN/ETH
#denmPort=BTP/GN/UdpIpCSG
#denmPort=BTP/GN/CSG
#denmPort=BTP/GN/UdpIpMarben
# Define the port/layer configuration for MAPEM-SPATEM
mapemSpatemPort=BTP/GN/ETH
#mapemSpatemPort=BTP/GN/CSG
# Define the port/layer configuration for IVIM
ivimPort=BTP/GN/ETH
#ivimPort=BTP/GN/CSG
# Define the port/layer configuration for SREM-SSEM
sremSsemPort=BTP/GN/ETH
#sremSsemPort=BTP/GN/CSG
# Define the port/layer configuration for BTP
btpPort=GN/ETH
# Define the port/layer configuration for GeoNetworking
geoNetworkingPort=ETH
#geoNetworkingPort=UdpIpCSG
#geoNetworkingPort=CSG
#geoNetworkingPort=UdpIpMarben
# Define the port/layer configuration for GeoNetworking over IPv6
ipv6OverGeoNetworkingPort=Debug
# Define the port/layer configuration for CALM FNTP
#fntpPort=FNTP/ETH
#fntpPort=FNTP/UdpIp
# Define the port/layer configuration for CALM FSAP
#fsapPort=FSAP/UdpIp
#fsapPort=FSAP/UdpIp

# Commsignia RSU and OBU Simulator
#UpperTesterSettings=10.200.1.101:12345
# Commsignia Wireless OBU
#UpperTesterSettings=80.98.62.165:18502
# Savari/VPN
#UpperTesterSettings=192.168.20.153:1999
# Yogoko/VPN
#UpperTesterSettings=192.168.201.2:12345
# Home laptop
UpperTesterSettings=192.168.1.53:12345
# Marben Jupiter VM32G upper tester
#UpperTesterSettings=192.168.7.182:10005

# RSU simulator
ConfigTesterSettings=10.200.1.102:12346

# Peer ITS station
#LinkLayer_Peer=001C6B0D0199

# Define the MAC address of the Ethernet interface connected to the IUT device
#       Home laptop VMWare MAC address
#LocalEthernetMAC=005056C00008
#       Home laptop MAC address (Wireless)
LocalEthernetMAC=DC536045AF7E
#       Home laptop/VPN MAC address
#LocalEthernetMAC=00FF6BADBFC2
#       ETSI computer MAC address
#LocalEthernetMAC=0022191B7FDB
# G5 bridge connected on USB3/Ethernet
#LocalEthernetMAC=00E08F008855
# Post-mortem ATS execution mode (G5 raw Ethernet only)
OfflineMode=false
#PcapFile=pcap/vendor/Livorno 20160914-2 DENM Full packet.pcap
PcapFile=F:/FSCOM/ETSI/ITS/STF517_ITS_Valid_Conform_Frmwk.2016/ITS-CMS5 PreQ/Savari/TC_SEC_ITSS_SND_MSG_01_01_BV.pcap
# Start at time in seconds since 1970-01-01, e.g. 1421661427.233361
OffsetTime=0
# Define the Ethernet type value used by the IUT
IutEthernetTypeValue=0x8947
# Node Ethernet addresses
LinkLayer_MTC=001C6B0D0100
# Link-Layer address of component NodeA
LinkLayer_NodeA=001C6B0D0101
# Link-Layer address of component NodeB
LinkLayer_NodeB=001C6B0D0102
# Link-Layer address of component NodeC
LinkLayer_NodeC=001C6B0D0103
# Link-Layer address of component NodeD
LinkLayer_NodeD=001C6B0D0104
# Link-Layer address of component NodeE
LinkLayer_NodeE=001C6B0D0105
# Link-Layer address of component NodeF
LinkLayer_NodeF=001C6B0D0106
# Link-Layer address of component NodeG
LinkLayer_NodeG=001C6B0D0107
# Link-Layer address of component NodeH
LinkLayer_NodeH=001C6B0D0108
# Link-Layer address of component NodeI
LinkLayer_NodeI=001C6B0D0109
# Link-Layer address of component NodeJ
LinkLayer_NodeJ=001C6B0D010A
# Interval between each beacon sent by TS (ms)
TsBeaconInterval=1000
# Latitude of Test System
#Commsignia TsLatitude=435525450
#Yogoko TsLatitude=481210840
#Marben TsLatitude=436175790
#Livorno 
TsLatitude=43551050
# Sofia-antipolis TsLatitude=436175790

# Longitude of Test System
#Commsignia TsLongitude=103008910
#Yogoko TsLongitude=-16287930
#Marben TsLongitude=70546480
#Livorno 
TsLongitude=10298730
# Sofia-antipolis TsLongitude=70546480

# Secured mode status
UtSecuredMode=false
# Secured configuration identifier
TsSecuredRootPath=data/certificates
# Secured root path to access certificates and private keys
TsSecuredConfiId=


