[MODULE_PARAMETERS] # This section shall contain the values of all parameters that are defined in your TTCN-3 modules. # The GeoNetworking address of the IUT. LibItsGeoNetworking_Pics.PICS_GN_LOCAL_GN_ADDR := { typeOfAddress := e_manual, stationType := e_passengerCar, stationCountryCode := 0, mid := '000000000001'O # typeOfAddress := e_initial, # stationType := e_unknown, #e_roadSideUnit, # stationCountryCode := 0, #33, # mid := '4C5E0C14D2EA'O } LibItsGeoNetworking_Pixits.PX_GN_UPPER_LAYER := e_btpB LibItsGeoNetworking_Pixits.PX_NEIGHBOUR_DISCOVERY_DELAY := 2.0 LibItsHttp_Pics.PICS_HEADER_CONTENT_TYPE := "application/x-its-request" LibItsHttp_Pics.PICS_HEADER_HOST := "etsi.ea.msi-dev.acloud.gemalto.com" LibItsPki_Pics.PICS_HTTP_POST_URI := "/" LibItsPki_Pics.PICS_HTTP_POST_URI := "/its" #LibItsSecurity_Pics.PICS_SEC_FIXED_KEYS := true # Seed # Enable Security support LibItsGeoNetworking_Pics.PICS_GN_SECURITY := true # Root path to access certificate stored in files, identified by certficate ID LibItsSecurity_Pixits.PX_CERTIFICATE_POOL_PATH := "/home/vagrant/tmp" # Configuration sub-directory to access certificate stored in files LibItsSecurity_Pixits.PX_IUT_SEC_CONFIG_NAME := "asn1c_cert" LibItsPki_Pics.PICS_ITS_S_SIGN_NITSP256_PRIVATE_KEY := '5C25F97607DFC62972A147FAD8B7A7C939569F0F95ECD4C641724A68B51836E5'O LibItsPki_Pics.PICS_ITS_S_SIGN_NISTP256_PUBLIC_KEY := '020144E5174B0AFDA86BDB8B643B68D40030F5BDB9A9F090C64852CC3C20C9D5AD'O LibItsPki_Pics.PICS_ITS_S_CANONICAL_ID := '1B4CA1210123AE900BBE6C3EBAE7E87DA20DBDAB1E7B2EC0691C51C1021900AA'O LibItsPki_Pics.PICS_TS_EA_CERTIFICATE_ID := "CERT_ATOS_EA" LibItsPki_Pics.PICS_TS_AA_CERTIFICATE_ID := "CERT_ATOS_AA" [LOGGING] # In this section you can specify the name of the log file and the classes of events # you want to log into the file or display on console (standard error). LogFile := "../logs/%e.%h-%r.%s" FileMask := LOG_ALL | USER | DEBUG | MATCHING ConsoleMask := LOG_ALL | USER | DEBUG | MATCHING #FileMask := ERROR | WARNING | USER | MATCHING | EXECUTOR_RUNTIME | VERDICTOP #ConsoleMask := ERROR | WARNING | USER | MATCHING | EXECUTOR_RUNTIME | VERDICTOP LogSourceInfo := Stack LogEntityName:= Yes LogEventTypes:= Yes #TimeStampFormat := DateTime [TESTPORT_PARAMETERS] # In this section you can specify parameters that are passed to Test Ports. # CAM Layer # next_header : btpA|btpB (overwrite BTP.type) # header_type : tsb|gbc # header_sub_type : sh (single hop) # DENM Layer # next_header : btpA|btpB (overwrite BTP.type) # header_type : tsb|gbc # BTP Layer # type : btpA|btpB # destination port: dst_port # source port : src_port # device_mode : Set to 1 if the layer shall encapsulate upper layer PDU # device_mode : Set to 1 if the layer shall encapsulate upper layer PDU # GN Layer # ll_address : GeoNetworking address of the Test System # latitude : latitude of the Test System # longitude : longitude of the Test System # beaconing : Set to 1 if GnLayer shall start beaconing # Beaconing timer expiry: expiry (ms) # device_mode : Set to 1 if the layer shall encapsulate upper layer PDU # secured_mode : Set to 1 if message exchanges shall be signed # encrypted_mode : Set to 1 if message exchanges shall be encrypted # NOTE: For signed & encrypted message exchanges, both secured_mode and encrypted_mode shall be set to 1 # sec_db_path : Path to the certificates and keys storage location # hash : Hash algorithm to be used when secured mode is set # Authorized values are SHA-256 or SHA-384 # Default: SHA-256 # signature : Signature algorithm to be used when secured mode is set # Authorized values are NISTP-256, NISTP-384, BP-256 and BP-384 # Default: NISTP-256 # cypher : Cyphering algorithm to be used when secured mode is set # Authorized values are NISTP-256, BP-256 and BP-384 # Default: NISTP-256 # Pki layer # certificate : Certificate to be used by the Test System for signature and encryption. Default: CERT_TS_A_AT # peer_certificate : Certificate to be used by the IUT for signature and encryption. Default: CERT_IUT_A_AT # Ethernet layer # mac_src :Source MAC address # mac_bc :Broadcast address # eth_type : Ethernet type # Commsignia layer # mac_src : Device MAC address, used to discard packets # To indicate no filering, use the value 000000000000 # mac_bc : Broadcast address # eth_type : Ethernet type, used to discard packets # target_host : Device address # target_port : Device port # source_port : Test System port # interface_id: Interface id, used to discard packets # tx_power : TX power (dB) # UDP layer (IP/UDP based on Pcap) # dst_ip : destination IPv4 address (aa.bb.cc.dd) # dst_port: destination port # src_ip : source IPv4 address (aa.bb.cc.dd) # src_port: source port # Pcap layer # mac_src : Source MAC address, used to exclude from capture the acket sent by the Test System # filter : Pcap filter (compliant with tcpdump syntax) # Online mode: # nic: Local NIC # If set, online mode is used # Offline mode (nic is present but not set): # file : File to read # frame_offset: Frame offset, used to skip packets with frame number < frame_offset # time_offset : Time offset, used to skip packets with time offset < time_offset # save_mode : 1 to save sent packet, 0 otherwise # Single GeoNetworking component port system.httpPort.params := "HTTP(codecs=http_its:http_etsi_ieee1609dot2_codec)/TCP(server=etsi.ea.msi-dev.acloud.gemalto.com,port=80,use_ssl=0)" # GeoNetworking UpperTester port based on UDP system.utPort.params := "UT_PKI/UDP(dst_ip=172.23.0.1,dst_port=8000)" [EXECUTE] #ItsPki_TestCases.TC_SEC_PKI_ITSS_ENR_BV_01 #ItsPki_TestCases.TC_SEC_PKI_ITSS_ENR_BV_02 #ItsPki_TestCases.TC_SEC_PKI_SND_EA_BV_01 #ItsPki_TestCases.TC_SEC_PKI_SND_EA_BV_02 #ItsPki_TestCases.TC_SEC_PKI_SND_EA_BV_03 #ItsPki_TestCases.TC_SEC_PKI_SND_EA_BV_04 #ItsPki_TestCases.TC_SEC_PKI_SND_EA_BV_05 #ItsPki_TestCases.TC_SEC_PKI_SND_EA_BV_06 #ItsPki_TestCases.TC_SEC_PKI_SND_EA_BV_07 #ItsPki_TestCases.TC_SEC_PKI_SND_EA_BV_08 #ItsPki_TestCases.TC_SEC_PKI_SND_EA_BV_09 #ItsPki_TestCases.TC_SEC_PKI_SND_EA_BV_10 #ItsPki_TestCases.TC_SEC_PKI_SND_EA_BV_11 #ItsPki_TestCases.TC_SEC_PKI_SND_EA_BV_12 #ItsPki_TestCases.TC_SEC_PKI_SND_EA_AA_BV_01 #ItsPki_TestCases.TC_SEC_PKI_SND_AA_BV_01 [MAIN_CONTROLLER] # The options herein control the behavior of MC. KillTimer := 10.0 LocalAddress := 127.0.0.1 TCPPort := 12000 NumHCs := 1