[MODULE_PARAMETERS] # This section shall contain the values of all parameters that are defined in your TTCN-3 modules. LibItsGeoNetworking_Pics.PICS_GN_LOCAL_GN_ADDR := { typeOfAddress := e_manual, stationType := e_passengerCar, #e_unknown reserved := 0, mid := '4C5E0C14D2EA'O #'00000000000B'O } # GeoNetwoking only, no facility layer, used for AtsGenNetworking and AtsSecurity with other profile #LibItsGeoNetworking_Pixits.PX_GN_UPPER_LAYER := e_any # With facility layer LibItsGeoNetworking_Pixits.PX_GN_UPPER_LAYER := e_btpB # Use this certificate if the RSU simulator act as IUT LibItsCommon_Pixits.PX_CERT_FOR_TS := "CERT_IUT_A_AT" # Indicate which RSU to simulate ItsRSUsSimulator_Pixits.PX_RSU_ID := 1; # Indicate which Use Case to simulate # UC1 (DENM only): PX_ETSI_USE_CASE_ID := 1 # UC2 (RHW) PX_ETSI_USE_CASE_ID := 2 # UC3 (TLM MAPEM/SPATEM): PX_ETSI_USE_CASE_ID := 3 # UC5 (IVIM only): PX_ETSI_USE_CASE_ID := 5 # UC6 (CAM only): PX_ETSI_USE_CASE_ID := 6 # UC7 (CAM only): PX_ETSI_USE_CASE_ID := 7 # UC8 (EVCSN only): PX_ETSI_USE_CASE_ID := 8 # UC9 (CAM only): PX_ETSI_USE_CASE_ID := 9 ItsRSUsSimulator_Pixits.PX_ETSI_USE_CASE_ID := 3 # 7 PX_RSU_ID := 8 ==> LCWW # 1 PX_RSU_ID := 1 ==> RWW # 2 PX_RSU_ID := 1 ==> RHW # Indicate which zone to simulate ItsRSUsSimulator_Pixits.PX_ETSI_ZONE_ID := 1 ItsRSUsSimulator_Pixits.PX_DENM_PARAM_UC2 := 1; # ==> RHW (1..5) ItsRSUsSimulator_Pics.PICS_GENERATE_BEACON := false # Change also its_aid in geoNetworking port setting ItsRSUsSimulator_Pics.PICS_GENERATE_CAM := false # Change also its_aid in geoNetworking port setting ItsRSUsSimulator_Pics.PICS_GENERATE_DENM := false # Change also its_aid in geoNetworking port setting ItsRSUsSimulator_Pics.PICS_GENERATE_IVIM := false # Change also its_aid in geoNetworking port setting ItsRSUsSimulator_Pics.PICS_GENERATE_MAPEM := false # Change also its_aid in geoNetworking port setting ItsRSUsSimulator_Pics.PICS_GENERATE_SPATEM := false # Change also its_aid in geoNetworking port setting ItsRSUsSimulator_Pics.PICS_GENERATE_SREM := false # Change also its_aid in geoNetworking port setting ItsRSUsSimulator_Pics.PICS_GENERATE_SSEM := false # Change also its_aid in geoNetworking port setting ItsRSUsSimulator_Pics.PICS_GENERATE_RTCMEM := false # Change also its_aid in geoNetworking port setting ItsRSUsSimulator_Pics.PICS_ITS_S_ROLE := false ItsRSUsSimulator_Pics.PICS_PKI_SUPPORT := true ItsRSUsSimulator_Pics.PICS_BEACON_FREQUENCY := 1.0 ItsRSUsSimulator_Pics.PICS_CAM_FREQUENCY := 1.0 ItsRSUsSimulator_Pics.PICS_DENM_FREQUENCY := 1.0 ItsRSUsSimulator_Pics.PICS_SEND_BEACON_INDICATION := false ItsRSUsSimulator_Pics.PICS_SEND_CAM_INDICATION := true ItsRSUsSimulator_Pics.PICS_SEND_DENM_INDICATION := true ItsRSUsSimulator_Pics.PICS_SEND_IVIM_INDICATION := true ItsRSUsSimulator_Pics.PICS_SEND_MAPEM_INDICATION := true ItsRSUsSimulator_Pics.PICS_SEND_SPATEM_INDICATION := true ItsRSUsSimulator_Pics.PICS_SEND_SREM_INDICATION := true ItsRSUsSimulator_Pics.PICS_SEND_SSEM_INDICATION := true ItsRSUsSimulator_Pics.PICS_SEND_RTCMEM_INDICATION := true # Enable Security support LibItsGeoNetworking_Pics.PICS_GN_SECURITY := false # Root path to access certificate stored in files, identified by certficate ID LibItsSecurity_Pixits.PX_CERTIFICATE_POOL_PATH := "/home/yann/tmp" # Configuration sub-directory to access certificate stored in files LibItsSecurity_Pixits.PX_IUT_SEC_CONFIG_NAME := "asn1c_cert" LibItsHttp_Pics.PICS_HEADER_CONTENT_TYPE := "application/x-its-request" LibItsHttp_Pics.PICS_HEADER_HOST := "192.168.42.252" LibItsPki_Pics.PICS_HTTP_POST_URI := "/ea/enrolment" LibItsPki_Pics.PICS_MULTIPLE_END_POINT := false LibItsPki_Pics.PICS_HTTP_POST_URI_EC := "/ea/enrolment" LibItsPki_Pics.PICS_HTTP_POST_URI_AT := "/aa/authorization" LibItsPki_Pics.PICS_HTTP_POST_URI_ATV := "/ea/authval" LibItsPki_Pics.PICS_ITS_S_SIGN_NITSP256_PRIVATE_KEY := '5C25F97607DFC62972A147FAD8B7A7C939569F0F95ECD4C641724A68B51836E5'O LibItsPki_Pics.PICS_ITS_S_SIGN_NISTP256_PUBLIC_KEY := '020144E5174B0AFDA86BDB8B643B68D40030F5BDB9A9F090C64852CC3C20C9D5AD'O LibItsPki_Pics.PICS_ITS_S_CANONICAL_ID := '455453492D4954532D303031'O LibItsPki_Pics.PICS_TS_EA_CERTIFICATE_ID := "CERT_TS_A_EA" LibItsPki_Pics.PICS_TS_AA_CERTIFICATE_ID := "CERT_TS_A_AA" LibItsPki_Pics.PICS_IUT_EA_CERTIFICATE_ID := "CERT_TS_A_EA" LibItsPki_Pics.PICS_IUT_AA_CERTIFICATE_ID := "CERT_TS_A_AA" [LOGGING] # In this section you can specify the name of the log file and the classes of events # you want to log into the file or display on console (standard error). LogFile := "../logs/%e.%h-%r.%s" FileMask := LOG_ALL | USER | DEBUG | MATCHING ConsoleMask := LOG_ALL | USER | DEBUG | MATCHING #FileMask := ERROR | WARNING | USER | MATCHING | EXECUTOR_RUNTIME | VERDICTOP #ConsoleMask := ERROR | WARNING | USER | MATCHING | EXECUTOR_RUNTIME | VERDICTOP LogSourceInfo := Stack LogEntityName:= Yes LogEventTypes:= Yes #TimeStampFormat := DateTime [TESTPORT_PARAMETERS] # In this section you can specify parameters that are passed to Test Ports. # CAM Layer # next_header : btpA|btpB (overwrite BTP.type) # header_type : tsb|gbc # header_sub_type : sh (single hop) # DENM Layer # next_header : btpA|btpB (overwrite BTP.type) # header_type : tsb|gbc # BTP Layer # type : btpA|btpB # destination port: dst_port # source port : src_port # device_mode : Set to 1 if the layer shall encapsulate upper layer PDU # device_mode : Set to 1 if the layer shall encapsulate upper layer PDU # GN Layer # its_aid : ITS AID as defined by ETSI TS 102 965 V1.2.1. Default: 141 # ll_address : GeoNetworking address of the Test System # latitude : Latitude of the Test System # longitude : Longitude of the Test System # beaconing : Set to 1 if the Test System shall start beaconing # expiry : Beaconning timer expiry (ms) # device_mode : Set to 1 if the layer shall encapsulate upper layer PDU # secured_mode : Set to 1 if message exchanges shall be signed # encrypted_mode : Set to 1 if message exchanges shall be encrypted # NOTE: For signed & encrypted message exchanges, both secured_mode and encrypted_mode shall be set to 1 # certificate : Certificate identifier the Test Adapter shall use # sec_db_path : Path to the certificates and keys storage location # hash : Hash algorithm to be used when secured mode is set # Authorized values are SHA-256 or SHA-384 # Default: SHA-256 # signature : Signature algorithm to be used when secured mode is set # Authorized values are NISTP-256, BP-256 and BP-384 # Default: NISTP-256 # cypher : Cyphering algorithm to be used when secured mode is set # Authorized values are NISTP-256, BP-256 and BP-384 # Default: NISTP-256 # Ethernet layer # mac_src :Source MAC address # mac_bc :Broadcast address # eth_type : Ethernet type # Commsignia layer # mac_src : Device MAC address, used to discard packets # To indicate no filering, use the value 000000000000 # mac_bc : Broadcast address # eth_type : Ethernet type, used to discard packets # target_host : Device address # target_port : Device port # source_port : Test System port # interface_id: Interface id, used to discard packets # tx_power : TX power (dB) # UDP layer (IP/UDP based on Pcap) # dst_ip : Destination IPv4 address (aa.bb.cc.dd) # dst_port: Destination port # src_ip : Source IPv4 address (aa.bb.cc.dd) # src_port: Source port # Pcap layer # mac_src : Source MAC address, used to exclude from capture the acket sent by the Test System # filter : Pcap filter (compliant with tcpdump syntax) # Online mode: # nic: Local NIC # If set, online mode is used # Offline mode (nic is present but not set): # file : File to read # frame_offset: Frame offset, used to skip packets with frame number < frame_offset # time_offset : Time offset, used to skip packets with time offset < time_offset # save_mode : Set to 1 to save sent packet, 0 otherwise # Single GeoNetworking component port # https://standards.iso.org/iso/ts/17419/TS17419%20Assigned%20Numbers/TS17419_ITS-AID_AssignedNumbers.pdf # its_aid=36: CAM # its_aid=37: DENM # its_aid=137: SPAT # its_aid=138: MAP # its_aid=139: IVIM # its_aid=140: SREM/SSEM # its_aid=141: GeoMet # its_aid=128: RTCMEM # Cygwin #system.geoNetworkingPort.params := "GN(ll_address=4C5E0C14D2EB,latitude=43551050,longitude=10298730,its_aid=36,secured_mode=0,certificate=CERT_IUT_A_AT,sec_db_path=/home/yann/tmp/asn1c_cert)/ETH(mac_src=f8cab8083918)/PCAP(mac_src=f8cab8083918,nic=CEBB111F-D749-4B40-8B4D-DBB060E90987,filter=and ether proto 0x8947)" # Linux #system.geoNetworkingPort.params := "GN(ll_address=4C5E0C14D2EB,latitude=43551050,longitude=10298730,its_aid=36,secured_mode=1,certificate=CERT_IUT_A_AT,sec_db_path=/home/yann/tmp/asn1c_cert)/ETH(mac_src=f8cab8083918)/PCAP(mac_src=f8cab8083918,nic=eno1,filter=and ether proto 0x8947)" system.geoNetworkingPort.params := "GN(ll_address=4C5E0C14D2EB,latitude=43551050,longitude=10298730,its_aid=138,secured_mode=0,certificate=CERT_IUT_A_AT,sec_db_path=/home/yann/tmp/asn1c_cert)/ETH(mac_src=dc536045af7e)/PCAP(mac_src=dc536045af7e,nic=wlp2s0,filter=and ether proto 0x8947)" # Commsignia #system.geoNetworkingPort.params := "GN(ll_address=4C5E0C14D2EB,latitude=43551050,longitude=10298730,its_aid=37,secured_mode=0,encrypted_mode=0,certificate=CERT_IUT_A_AT,peer_certificate=CERT_TS_A_AT,sec_db_path=/home/yann/tmp/asn1c_cert)/COMMSIGNIA(xport_mode=LTE-V2X,mac_src=080027F44E7D,interface_id=2,target_host=192.168.0.54)/UDP(dst_ip=192.168.0.54,src_port=9091,dst_port=7946)" # Qualcom #system.geoNetworkingPort.params := "GN(ll_address=4C5E0C14D2EB,latitude=36747486,longitude=-4556772,distanceA=25,distanceB=25,its_aid=37,secured_mode=1,encrypted_mode=0,certificate=CERT_MICROSEC_AT_01,peer_certificate=CERT_TS_A_AT,sec_db_path=/home/yann/tmp/asn1c_cert)/QUALCOMM/UDP(dst_ip=10.200.1.113,src_port=9091,dst_port=4041)" #system.httpPort.params := "HTTP(codecs=http_its:http_etsi_ieee1609dot2_codec)/TCP(debug=1,server=192.168.42.25,port=80)" #system.httpPort.params := "HTTP(codecs=http_its:http_etsi_ieee1609dot2_codec)/TCP(debug=1,server=192.168.1.25,port=8080)" #system.httpPort.params := "HTTP(codecs=http_its:http_etsi_ieee1609dot2_codec)/TCP(debug=1,server=192.168.1.39,port=8080)" # Config port based on UDP #system.cfPort.params := "CF(ut=cam)/UDP(src_port=12345,dst_port=12346,reuse_incoming_source_adddress=1)" #system.cfPort.params := "CF(ut=denm)/UDP(src_port=12345,reuse_incoming_source_adddress=1)" #system.cfPort.params := "CF(ut=ivim)/UDP(src_port=12345,dst_port=12346,reuse_incoming_source_adddress=1)" system.cfPort.params := "CF(ut=mapemspatem)/UDP(src_port=12345,dst_port=12346,reuse_incoming_source_adddress=1)" #system.cfPort.params := "CF(ut=sremssem)/UDP(src_port=12345,dst_port=12346,reuse_incoming_source_adddress=1)" #system.cfPort.params := "CF(ut=rtcmem)/UDP(src_port=12345,dst_port=12346,reuse_incoming_source_adddress=1)" #system.cfPort.params := "CF(ut=gn)/UDP(src_port=12345,dst_port=12346,reuse_incoming_source_adddress=1)" #system.cfPort.params := "CF(ut=pki)/UDP(src_port=12345,dst_port=12346,reuse_incoming_source_adddress=1)" [EXECUTE] ItsRSUsSimulator_TestCases.TC_RSUSIMU_BV_01 [MAIN_CONTROLLER] # The options herein control the behavior of MC. KillTimer := 10.0 LocalAddress := 127.0.0.1 TCPPort := 12001 NumHCs := 1