Commit 7754aded authored by garciay's avatar garciay
Browse files

ASN.1 Changes due to latest asn1c github version 

Enhance UdpLayer
Bug fixed on CAM/DENM/BTP layers (TODO GeoNetworking LAYER)
Validation basic test cases for CAM/DENM/GeoNetworking
parent a239bb00

etc/AtsCAM/ITSTS.cfg

+16 −118
Original line number Diff line number Diff line
@@ -5,7 +5,7 @@ LibItsGeoNetworking_Pics.PICS_GN_LOCAL_GN_ADDR := { 
  typeOfAddress := e_initial,

  stationType := e_passengerCar,

  stationCountryCode := 0,

  mid := '92569202017a'O

  mid := '001C6B00FF51'O

}



LibItsGeoNetworking_Pixits.PX_GN_UPPER_LAYER := e_any
@@ -37,16 +37,17 @@ LogEventTypes:= Yes 
#   beaconing              : Set to 1 if GnLayer shall start beaconing

#   Beaconning timer expiry: expiry (ms)

# Ethernet layer

#   Source MAC address: mac_src

#   Source MAC address of the TestSystem : mac_src

#   Broadcast address                    : mac_bc

#   Ethernet type     : eth_type

#   Ethernet type for ITS                : eth_type

# UDP layer (IP/UDP based on Pcap)

#   dst_ip  : destination IPv4 address (aa.bb.cc.dd)

#   dst_ip  : destination IPv4 address (aa.bb.cc.dd), the IUT

#   dst_port: destination port

#   src_ip  : source IPv4 address (aa.bb.cc.dd)

#   src_ip  : source IPv4 address (aa.bb.cc.dd), the TestSystem

#   src_port: source port

# Pcap layer

#   Pcap filter : filter

#   mac_src     : used to exclude TestSystem sent message from the capture

#   Online mode :

#     Local NIC : nic

#                 If set, online mode is used
@@ -56,116 +57,14 @@ LogEventTypes:= Yes 
#     Time offset     : time_offset

#     Save sent packet: save_mode=[0|1]



# Single GeoNetworking component port

system.geoNetworkingPort.params := "GN(ll_address=F8CAB8083918,latitude=43551050,longitude=10298730,beaconing=0,expiry=1000,its_aid=141)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=BABEBABE0002,nic=,file=/home/ubuntu/tmp/TC_GEONW_PON_BEA_TI_02.pcap,filter=ether proto 0x8947,frame_offset=0,save_mode=1)"

#system.geoNetworkingPort.params := "GN(ll_address=F8CAB8083918,latitude=43551050,longitude=10298730,beaconing=0,expiry=1000,its_aid=141)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=F8CAB8083918,nic=,file=/home/ubuntu/tmp/test_beacon.pcap,filter=ether proto 0x8947,frame_offset=0,save_mode=1)"

#system.geoNetworkingPort.params := "GN(ll_address=F8CAB8083918,latitude=43551050,longitude=10298730,beaconing=0,expiry=1000,its_aid=141)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=F8CAB8083918,nic=enp0s8,file=,filter=ether proto 0x8947,frame_offset=0,save_mode=0)"

system.camPort.params := "CAM/BTP(type=btpB,dst_port=2001,src_port=0)/GN(ll_address=0800275c4959,latitude=43551050,longitude=10298730,expiry=1000,its_aid=141)/ETH(mac_src=0800275c4959,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=0800275c4959,nic=enp0s8,filter=and ether proto 0x8947)"



# Multiple GeoNetworking component port

Comp1.geoNetworkingPort.params := "GN(ll_address=F8CAB8083919,latitude=43551050,longitude=10298730,beaconing=1,expiry=1000,its_aid=141)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=F8CAB8083919,nic=,file=/home/ubuntu/tmp/test_1_cam.pcap,filter=ether proto 0x8947,frame_offset=0,save_mode=0)"

Comp2.geoNetworkingPort.params := "GN(ll_address=F8CAB808391A,latitude=43551050,longitude=10298730,beaconing=1,expiry=1000,its_aid=141)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=F8CAB808391A,nic=,file=/home/ubuntu/tmp/test_1_cam.pcap,filter=ether proto 0x8947,frame_offset=0,save_mode=0)"



# BTP port

system.btpPort.params := "BTP(type=btpB,dst_port=2000,src_port=0)/GN(ll_address=F8CAB8083918,latitude=43551050,longitude=10298730,expiry=1000,its_aid=141)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=F8CAB8083918,nic=,file=/home/ubuntu/tmp/test_1_cam.pcap,filter=ether proto 0x8947,frame_offset=0)"



# CAM port

system.camPort.params := "CAM/BTP(type=btpA,dst_port=2000,src_port=0)/GN(ll_address=F8CAB8083918,latitude=43551050,longitude=10298730,expiry=1000,its_aid=141)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=F8CAB8083918,nic=,file=/home/ubuntu/tmp/test_1_cam.pcap,filter=ether proto 0x8947,frame_offset=0)"



# DENM port

system.denmPort.params := "DENM/BTP(type=btpA,dst_port=2001,src_port=0)/GN(ll_address=F8CAB8083918,latitude=43551050,longitude=10298730,expiry=1000,its_aid=141)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=F8CAB8083918,nic=,file=/home/ubuntu/tmp/test_1_denm.pcap,filter=ether proto 0x8947,frame_offset=0)"



# UpperTester port based on UDP

system.utPort.params := "UT/UDP(dst_ip=192.168.56.1,dst_port=12346,src_ip=192.168.156.4,src_port=12345)/ETH(mac_src=026f8338c1e5,mac_dst=0A0027000011,eth_type=0800)/PCAP(mac_src=0800275c4959,nic=enp0s8,filter=udp port 12346)"

# CAM UpperTester port based on UDP (ETSI Wlan)

system.utPort.params := "UT_CAM/UDP(dst_ip=192.168.0.102,dst_port=12345,src_ip=192.168.0.104,src_port=12345)/ETH(mac_src=0800275c4959,mac_dst=F8CAB8083918,eth_type=0800)/PCAP(mac_src=0800275c4959,nic=enp0s8,filter=and udp port 12345)"



[EXECUTE]

# GeoNetworking Req

#TestCodec_GeoNetworking.tc_GeoNetReq_AnycastPacket

#TestCodec_GeoNetworking.tc_GeoNetReq_BroadcastPacket

#TestCodec_GeoNetworking.tc_GeoNetReq_UnicastPacket

#TestCodec_GeoNetworking.tc_GeoNetReq_BeaconPacket

#TestCodec_GeoNetworking.tc_GeoNetReq_LsRequestPacket

#TestCodec_GeoNetworking.tc_GeoNetReq_LsReplyPacket

# GeoNetworking Ind

#TestCodec_GeoNetworking.tc_GeoNetInd_AnycastPacket

#TestCodec_GeoNetworking.tc_GeoNetInd_BroadcastPacket

#TestCodec_GeoNetworking.tc_GeoNetInd_ShbPacket

#TestCodec_GeoNetworking.tc_GeoNetInd_UnicastPacket

#TestCodec_GeoNetworking.tc_GeoNetInd_BeaconPacket

# GeoNetworking Port

#TestCodec_GeoNetworking.tc_GeoNet_Port

#TestCodec_GeoNetworking.tc_GeoNet_Port_utPort

#TestCodec_GeoNetworking.tc_GeoNet_Port_acPort_lpv

#TestCodec_GeoNetworking.tc_GeoNet_acPort_getLongPositionVector_1

#TestCodec_GeoNetworking.tc_GeoNet_acPort_getLongPositionVector_2

#TestCodec_GeoNetworking.tc_GeoNet_Port_acPort_beaconing_1

#TestCodec_GeoNetworking.tc_GeoNet_Port_acPort_beaconing_2

#TestCodec_GeoNetworking.tc_GeoNet_Port_acPort_pass_beaconing_1

#TestCodec_GeoNetworking.tc_GeoNet_Port_acPort_pass_beaconing_2

#TestCodec_GeoNetworking.tc_GeoNet_MultiPort

#GeoNetworking UpperTester

#TestCodec_GeoNetworking.tc_GeoNet_UtGnInitialize

#TestCodec_GeoNetworking.tc_GeoNet_UtGnChangePosition

#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_GeoUnicast_1

#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_GeoUnicast_2

#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_GeoBroadcast_1

#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_GeoBroadcast_2

#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_GeoAnycast_1

#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_GeoAnycast_2

#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_Shb_1

#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_Shb_2

#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_Tsb_1

#TestCodec_GeoNetworking.tc_GeoNet_UtGnTrigger_Tsb_2



# Btp PDU

#TestCodec_Btp.tc_Btp_A_Without_Payload

#TestCodec_Btp.tc_Btp_A

#TestCodec_Btp.tc_Btp_B

#TestCodec_Btp.tc_BtpReq_A

# Btp Port

#TestCodec_Btp.tc_Btp_Port



# CAM PDU

#TestCodec_CAM.tc_CamReq

#TestCodec_CAM.tc_CamInd

TestCodec_CAM.tc_Cam_Port

# CAM UpperTester

#TestCodec_CAM.tc_Cam_UtCamInitialize

#TestCodec_CAM.tc_Cam_UtCamChangePosition

#TestCodec_CAM.tc_Cam_UtCamChangeCurvature

#TestCodec_CAM.tc_Cam_UtCamChangeSpeed

#TestCodec_CAM.tc_Cam_UtCamSetAccelerationControlStatus

#TestCodec_CAM.tc_Cam_UtCamSetExteriorLightsStatus_lowBeamHeadlightsOn

#TestCodec_CAM.tc_Cam_UtCamSetExteriorLightsStatus_leftTurnSignalOn

#TestCodec_CAM.tc_Cam_UtCamSetExteriorLightsStatus_daytimeRunningLightsOn

#TestCodec_CAM.tc_Cam_UtCamSetExteriorLightsStatus_parkingLightsOn

#TestCodec_CAM.tc_Cam_UtCamChangeHeading

#TestCodec_CAM.tc_Cam_UtCamSetDriveDirection

#TestCodec_CAM.tc_Cam_UtCamChangeYawRate

#TestCodec_CAM.tc_Cam_UtCamChangeYawRate_negative

#TestCodec_CAM.tc_Cam_UtCamSetStationType

#TestCodec_CAM.tc_Cam_UtCamSetVehicleRole

#TestCodec_CAM.tc_Cam_UtCamSetDangerousGoods

#TestCodec_CAM.tc_Cam_UtCamSetLightBarSirene

#TestCodec_CAM.tc_Denm_UtCamTriggerResult

#TestCodec_CAM.tc_Cam_UtCamEventInd_1

#TestCodec_CAM.tc_Cam_UtCamEventInd_2



# DENM PDU

#TestCodec_DENM.tc_DenmReq

#TestCodec_DENM.tc_DenmInd

TestCodec_DENM.tc_Denm_Port

#TestCodec_DENM.tc_Denm_Port_utPort

# DENM UpperTester

#TestCodec_DENM.tc_Denm_UtDenmInitialize

#TestCodec_DENM.tc_Denm_UtDenmChangePosition

#TestCodec_DENM.tc_Denm_UtDenmChangePseudonym

#TestCodec_DENM.tc_Denm_UtDenmTrigger_1

#TestCodec_DENM.tc_Denm_UtDenmTrigger_2

#TestCodec_DENM.tc_Denm_UtDenmUpdate_1

#TestCodec_DENM.tc_Denm_UtDenmTriggerResult

#TestCodec_DENM.tc_Denm_UtDenmUpdateResult

#TestCodec_DENM.tc_Denm_UtDenmEventInd_1

#TestCodec_DENM.tc_Denm_UtDenmEventInd_2

#ItsCam_TestCases.TC_CAM_MSD_FMT_BV_01

ItsCam_TestCases.TC_CAM_MSD_FMT_BV_02



[MAIN_CONTROLLER]

# The options herein control the behavior of MC.
@@ -174,4 +73,3 @@ TCPPort := 0 
LocalAddress := 127.0.0.1

TCPPort := 12000

NumHCs := 1

etc/TestCodec/ITSTS.cfg

+22 −18
Original line number Diff line number Diff line
@@ -57,22 +57,19 @@ LogEventTypes:= Yes 
#     Save sent packet: save_mode=[0|1]



# Single GeoNetworking component port

system.geoNetworkingPort.params := "GN(ll_address=F8CAB8083918,latitude=43551050,longitude=10298730,beaconing=0,expiry=1000,its_aid=141)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=BABEBABE0002,nic=,file=/home/ubuntu/tmp/TC_GEONW_PON_BEA_TI_02.pcap,filter=and ether proto 0x8947,frame_offset=0,save_mode=1)"

#system.geoNetworkingPort.params := "GN(ll_address=F8CAB8083918,latitude=43551050,longitude=10298730,beaconing=0,expiry=1000,its_aid=141)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=F8CAB8083918,nic=,file=/home/ubuntu/tmp/test_beacon.pcap,filter=and ether proto 0x8947,frame_offset=0,save_mode=1)"

#system.geoNetworkingPort.params := "GN(ll_address=F8CAB8083918,latitude=43551050,longitude=10298730,beaconing=0,expiry=1000,its_aid=141)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=F8CAB8083918,nic=enp0s8,file=,filter=and ether proto 0x8947,frame_offset=0,save_mode=0)"



system.geoNetworkingPort.params := "GN(ll_address=F8CAB8083918,latitude=43551050,longitude=10298730,beaconing=0,expiry=1000,its_aid=141)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=BABEBABE0002,nic=,file=../../../testdata/test_1_beacon.pcap,filter=and ether proto 0x8947,frame_offset=0,save_mode=1)"

# Multiple GeoNetworking component port

Comp1.geoNetworkingPort.params := "GN(ll_address=F8CAB8083919,latitude=43551050,longitude=10298730,beaconing=1,expiry=1000,its_aid=141)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=F8CAB8083919,nic=,file=/home/ubuntu/tmp/test_1_cam.pcap,filter=and ether proto 0x8947,frame_offset=0,save_mode=0)"

Comp1.geoNetworkingPort.params := "GN(ll_address=F8CAB8083919,latitude=43551050,longitude=10298730,beaconing=1,expiry=1000,its_aid=141)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=F8CAB8083919,nic=,file=../../../testdata/test_1_cam.pcap,filter=and ether proto 0x8947,frame_offset=0,save_mode=0)"

Comp2.geoNetworkingPort.params := "GN(ll_address=F8CAB808391A,latitude=43551050,longitude=10298730,beaconing=1,expiry=1000,its_aid=141)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=F8CAB808391A,nic=,file=/home/ubuntu/tmp/test_1_cam.pcap,filter=and ether proto 0x8947,frame_offset=0,save_mode=0)"



# BTP port

system.btpPort.params := "BTP(type=btpB,dst_port=2000,src_port=0)/GN(ll_address=F8CAB8083918,latitude=43551050,longitude=10298730,expiry=1000,its_aid=141)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=F8CAB8083918,nic=,file=/home/ubuntu/tmp/test_1_cam.pcap,filter=and ether proto 0x8947,frame_offset=0)"

system.btpPort.params := "BTP(type=btpB,dst_port=2000,src_port=0)/GN(ll_address=F8CAB8083918,latitude=43551050,longitude=10298730,expiry=1000,its_aid=141)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=F8CAB8083918,nic=,file=../../../testdata/test_1_cam.pcap,filter=and ether proto 0x8947,frame_offset=0)"



# CAM port

system.camPort.params := "CAM/BTP(type=btpA,dst_port=2000,src_port=0)/GN(ll_address=F8CAB8083918,latitude=43551050,longitude=10298730,expiry=1000,its_aid=141)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=F8CAB8083918,nic=,file=/home/ubuntu/tmp/test_1_cam.pcap,filter=and ether proto 0x8947,frame_offset=0)"

system.camPort.params := "CAM/BTP(type=btpA,dst_port=2001,src_port=0)/GN(ll_address=F8CAB8083918,latitude=43551050,longitude=10298730,expiry=1000,its_aid=141)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=F8CAB8083918,nic=,file=../../../testdata/test_1_cam.pcap,save_mode=1,filter=and ether proto 0x8947,frame_offset=0)"



# DENM port

system.denmPort.params := "DENM/BTP(type=btpA,dst_port=2001,src_port=0)/GN(ll_address=F8CAB8083918,latitude=43551050,longitude=10298730,expiry=1000,its_aid=141)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=F8CAB8083918,nic=,file=/home/ubuntu/tmp/test_1_denm.pcap,filter=and ether proto 0x8947,frame_offset=0)"

system.denmPort.params := "DENM/BTP(type=btpA,dst_port=2002,src_port=0)/GN(ll_address=F8CAB8083918,latitude=43551050,longitude=10298730,expiry=1000,its_aid=141)/ETH(mac_src=F8CAB8083918,mac_bc=FFFFFFFFFFFF,eth_type=8947)/PCAP(mac_src=F8CAB8083918,nic=,file=../../../testdata/test_1_denm.pcap,save_mode=1,filter=and ether proto 0x8947,frame_offset=0)"



# GeoNetworking UpperTester port based on UDP 

system.utPort.params := "UT_GN/UDP(dst_ip=192.168.56.1,dst_port=12346,src_ip=192.168.156.4,src_port=12345)/ETH(mac_src=026f8338c1e5,mac_dst=0A0027000011,eth_type=0800)/PCAP(mac_src=0800275c4959,nic=enp0s8,filter=and udp port 12346)"
@@ -91,9 +88,11 @@ system.utPort.params := "UT_GN/UDP(dst_ip=192.168.56.1,dst_port=12346,src_ip=192 
#TestCodec_GeoNetworking.tc_GeoNetInd_ShbPacket

#TestCodec_GeoNetworking.tc_GeoNetInd_UnicastPacket

#TestCodec_GeoNetworking.tc_GeoNetInd_BeaconPacket

# GeoNetworking Port

# GeoNetworking port tests

# To run the GeoNetworking port tests, use the offline mode and the test data provided. Use PcapLayer.save_mode to save sent packet into a file

#TestCodec_GeoNetworking.tc_GeoNet_Port

#TestCodec_GeoNetworking.tc_GeoNet_Port_utPort

TestCodec_GeoNetworking.tc_GeoNet_Port_utPort

# GeoNetworking AC port

#TestCodec_GeoNetworking.tc_GeoNet_Port_acPort_lpv

#TestCodec_GeoNetworking.tc_GeoNet_acPort_getLongPositionVector_1

#TestCodec_GeoNetworking.tc_GeoNet_acPort_getLongPositionVector_2
@@ -124,9 +123,11 @@ system.utPort.params := "UT_GN/UDP(dst_ip=192.168.56.1,dst_port=12346,src_ip=192 
# Btp Port

#TestCodec_Btp.tc_Btp_Port



# CAM PDU

# CAM PDU tests

#TestCodec_CAM.tc_CamReq

#TestCodec_CAM.tc_CamInd

# CAM port tests

# To run the CAM port tests, use the offline mode and the test data provided. Use PcapLayer.save_mode to save sent packet into a file

#TestCodec_CAM.tc_Cam_Port

# CAM UpperTester

#TestCodec_CAM.tc_Cam_UtCamInitialize
@@ -146,22 +147,25 @@ system.utPort.params := "UT_GN/UDP(dst_ip=192.168.56.1,dst_port=12346,src_ip=192 
#TestCodec_CAM.tc_Cam_UtCamSetVehicleRole

#TestCodec_CAM.tc_Cam_UtCamSetDangerousGoods

#TestCodec_CAM.tc_Cam_UtCamSetLightBarSirene

#TestCodec_CAM.tc_Denm_UtCamTriggerResult

#TestCodec_CAM.tc_Cam_UtCamTriggerResult

#TestCodec_CAM.tc_Cam_UtCamEventInd_1

#TestCodec_CAM.tc_Cam_UtCamEventInd_2



# DENM PDU

#TestCodec_DENM.tc_DenmReq

#TestCodec_DENM.tc_DenmInd

# CAM port tests

# To run the DENM port tests, use the offline mode and the test data provided. Use PcapLayer.save_mode to save sent packet into a file

#TestCodec_DENM.tc_Denm_Port

#TestCodec_DENM.tc_Denm_Port_utPort

# DENM UpperTester

TestCodec_DENM.tc_Denm_UtDenmInitialize

TestCodec_DENM.tc_Denm_UtDenmChangePosition

TestCodec_DENM.tc_Denm_UtDenmChangePseudonym

TestCodec_DENM.tc_Denm_UtDenmTrigger_1

TestCodec_DENM.tc_Denm_UtDenmTrigger_2

#TestCodec_DENM.tc_Denm_UtDenmInitialize

#TestCodec_DENM.tc_Denm_UtDenmChangePosition

#TestCodec_DENM.tc_Denm_UtDenmChangePseudonym

#TestCodec_DENM.tc_Denm_UtDenmTrigger_1

#TestCodec_DENM.tc_Denm_UtDenmTrigger_2

#TestCodec_DENM.tc_Denm_UtDenmUpdate_1

#TestCodec_DENM.tc_Denm_UtDenmUpdate_2

#TestCodec_DENM.tc_Denm_UtDenmTriggerResult

#TestCodec_DENM.tc_Denm_UtDenmUpdateResult

#TestCodec_DENM.tc_Denm_UtDenmEventInd_1