Newer
Older
// Preamble
f_prNeighbour();
geoNetworkingPort.clear;
v_component := f_setCamFrequencyGreatherThan1Hz();
tc_ac.start;
alt {
[] geoNetworkingPort.receive(
mw_geoNwInd(
mw_geoNwSecPdu(
mdw_securedMessage_CAMs(
mw_header_field_signer_info_certificate
)))) {
t_maxTransInterval.start;
tc_ac.stop;
log("*** " & testcasename() & ": INFO: Initial conditions: First CAM message with certificate received ***");
f_selfOrClientSyncAndVerdictPreamble(c_prDone, e_success);
}
[] tc_ac.timeout {
log("*** " & testcasename() & ": INCONC: Initial conditions: CAM message with certificate not received ***");
f_selfOrClientSyncAndVerdictPreamble("error", e_timeout);
}
} // End of 'alt' statement
// Test Body
tc_ac.start;
alt {
[] geoNetworkingPort.receive(
mw_geoNwInd(
mw_geoNwSecPdu(
mdw_securedMessage_CAMs(
mw_header_field_signer_info_certificate
)))) {
t_maxTransInterval.stop;
v_cntTime := v_cntTime + 1;
if (v_cntTime == c_cntTimeLimit) { // Exit message loop
log("*** " & testcasename() & ": PASS: Generation of CAM messages including certificate was successful ***");
f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_success);
// end of alt
t_maxTransInterval.start;
log("*** " & testcasename() & ": INFO: CAM retransmission with certificate ***");
repeat;
}
}
[] geoNetworkingPort.receive(
mw_geoNwInd(
mw_geoNwSecPdu(
mdw_securedMessage_CAMs(
mw_header_field_signer_info_digest
)))) {
log("*** " & testcasename() & ": INFO: CAM retransmission with digest ***");
repeat;
[] t_maxTransInterval.timeout {
log("*** " & testcasename() & ": FAIL: CAM with certificate was not received in 1 sec after previous one ***");
f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_error);
}
[] tc_ac.timeout {
log("*** " & testcasename() & ": INCONC: Expected CAM not received ***");
f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_timeout);
}
} // End of 'alt' statement
// Postamble
f_terminateCam(v_component);
f_poNeighbour();
f_cf01Down();
} // End of testcase TC_SEC_ITSS_SND_CAM_05_02_BV
* @desc Check that ITS-S sends a Secured CAM containing the signer_info of type certificate
* when the ITS-S received a CAM from an unknown ITS-S
* Pics Selection: PICS_GN_SECURITY
* Config Id: CF01
* Initial conditions:
* with {
* the IUT being in the 'authorized' state
* and the IUT is configured to send more than one CAM per second
* and the IUT having already sent CAM at TIME_1
* containing header_fields['signer_info'].signer.type
* indicating 'certificate'
* and the IUT having received a SecuredMessage at TIME_2 (TIME_1 < TIME_2 < TIME_1+ 1sec)
* containing header_fields['signer_info']
* containing signer
* containing type
* indicating 'certificate_digest_with_sha256'
* containing digest
* indicating HashedId3 value
* referenced to unknown certificate
* }
* ensure that {
* when {
* the IUT is requested to send CAM at TIME_3 (TIME_1 < TIME_2 < TIME_3 < TIME_1 + 1sec)
* the IUT sends a SecuredMessage
* containing header_fields[0]
* containing type
* indicating 'signer_info'
* containing type
* indicating 'certificate'
* }
* }
* </pre>
*
* @see ETSI TS 103 096-2 v1.2.2 TP_SEC_ITSS_SND_CAM_06_01_BV
* @reference ETSI TS 103 097 [1], clause 7.1
testcase TC_SEC_ITSS_SND_CAM_06_01_BV() runs on ItsGeoNetworking system ItsSecSystem {
// Local variables
var GeoNetworkingInd v_geoNwInd;
var ItsCam v_component;
timer t_maxTransInterval := 0.3;
if (not(PICS_GN_SECURITY)) {
log("*** " & testcasename() & ":ERROR: 'PICS_GN_SECURITY' required for executing the TC ***");
stop;
}
// Test component configuration
f_cf01Up();
// Test adapter configuration
// Preamble
f_prNeighbour();
v_component := f_setCamFrequencyGreatherThan1Hz();
tc_ac.start;
alt {
[] geoNetworkingPort.receive(
mw_geoNwInd(
mw_geoNwSecPdu(
mdw_securedMessage_CAMs(
mw_header_field_signer_info_certificate
)))) {
tc_ac.stop;
log("*** " & testcasename() & ": INFO: Initial conditions: First CAM message with certificate received ***");
// Send secured message from unknown ITS-S
geoNetworkingPort.clear;
f_sendSecuredCam(cc_taCert_F, omit, e_certificate_digest_with_sha256);
f_selfOrClientSyncAndVerdictPreamble(c_prDone, e_success);
}
[] tc_ac.timeout {
log("*** " & testcasename() & ": INCONC: Initial conditions: CAM message with certificate not received ***");
f_selfOrClientSyncAndVerdictPreamble("error", e_timeout);
}
}
// Test Body
t_maxTransInterval.start;
tc_ac.start;
alt {
[] geoNetworkingPort.receive(
mw_geoNwInd(
mw_geoNwSecPdu(
mdw_securedMessage_CAMs(
mw_header_field_signer_info_certificate
)))) {
tc_ac.stop;
t_maxTransInterval.stop;
log("*** " & testcasename() & ": PASS: Generation of CAM messages including certificate was successful ***");
f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_success);
}
[] geoNetworkingPort.receive(
mw_geoNwInd(
mw_geoNwSecPdu(
mdw_securedMessage_CAMs
))) {
repeat;
}
[] t_maxTransInterval.timeout {
log("*** " & testcasename() & ": FAIL: CAM was transmited w/o unrecognized request header ***");
f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_error);
}
[] tc_ac.timeout {
log("*** " & testcasename() & ": INCONC: Expected CAM not received ***");
f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_timeout);
}
} // End of 'alt' statement
// Postamble
f_terminateCam(v_component);
f_poNeighbour();
f_cf01Down();
} // End of testcase TC_SEC_ITSS_SND_CAM_06_01_BV
/**
* @desc Check that IUT restart the certificate sending timer when the certificate has been sent
* <pre>
* Pics Selection: PICS_GN_SECURITY
* Config Id: CF01
* Initial conditions:
* with {
* the IUT being in the 'authorized' state
* and the IUT is configured to send more then one CAM per second
* and the IUT having already sent CAM at TIME_1
* containing header_fields['signer_info'].signer.type
* indicating 'certificate'
* and the IUT having received a CAM at TIME_2 (TIME_1 +0.3sec)
* containing header_fields['request_unrecognized_certificate']
* containing digests
* containing HashedId3 value
* referencing to the the IUT certificate
* and the IUT having sent CAM at TIME_3 (TIME_3 > TIME_2)
* containing header_fields['signer_info'].signer.type
* indicating 'certificate'
* }
* ensure that {
* when {
* the IUT is sending the next CAM at TIME_4
* containing header_fields['signer_info'].signer.type
* indicating 'certificate'
* } then {
* the difference between TIME_4 and TIME_3 is about of 1sec
* }
* }
* </pre>
*
* @see ETSI TS 103 096-2 v1.2.2 TP_SEC_ITSS_SND_CAM_07a_01_TI
* @reference ETSI TS 103 097 [1], clause 7.1
testcase TC_SEC_ITSS_SND_CAM_07_01_TI() runs on ItsGeoNetworking system ItsSecSystem {
// Local variables
const float c_certificateGenerationTime := 1.0;
timer t_maxTransInterval := c_certificateGenerationTime * 0.9;
var GeoNetworkingInd v_geoNwInd;
var SignerInfo v_signerInfo;
var ItsCam v_component;
var boolean v_firstCertReceived := false;
if (not(PICS_GN_SECURITY)) {
log("*** " & testcasename() & ": ERROR: 'PICS_GN_SECURITY' required for executing the TC ***");
stop;
}
// Test component configuration
f_cf01Up();
// Test adapter configuration
// Preamble
f_prNeighbour();
v_component := f_setCamFrequencyGreatherThan1Hz();
[v_firstCertReceived == false] geoNetworkingPort.receive(
mw_geoNwInd(
mw_geoNwSecPdu(
mdw_securedMessage_CAMs(
mw_header_field_signer_info_certificate
)))) -> value v_geoNwInd {
log("*** " & testcasename() & ": INFO: Initial conditions: The first CAM with certificate is received ***");
v_firstCertReceived := true;
f_sleep(0.3);
// Send secured message with request for unrecognized certificate
f_getMsgSignerInfo(f_getSecuredMessage(v_geoNwInd.msgIn), v_signerInfo);
{
m_header_field_unrecognised_certificate(
f_HashedId3FromHashedId8(
f_calculateDigestFromCertificate(
v_signerInfo.signerInfo.certificate
)
},
e_certificate_digest_with_sha256
);
repeat;
}
[v_firstCertReceived == true] geoNetworkingPort.receive(
mw_geoNwInd(
mw_geoNwSecPdu(
mdw_securedMessage_CAMs(
mw_header_field_signer_info_certificate
)))) {
tc_ac.stop;
// start a timeout of one second to check
// that the next cert will be received after this timeout
t_maxTransInterval.start;
log("*** " & testcasename() & ": INFO: Initial conditions: The requested CAM with certificate is received ***");
f_selfOrClientSyncAndVerdictPreamble(c_prDone, e_success);
}
[] tc_ac.timeout {
log("*** " & testcasename() & ": INCONC: Initial conditions: CAM message with certificate not received ***");
f_selfOrClientSyncAndVerdictPreamble("error", e_timeout);
}
} // End of 'alt' statement
// Test Body
tc_ac.start;
alt {
[] geoNetworkingPort.receive(
mw_geoNwInd(
mw_geoNwSecPdu(
mdw_securedMessage_CAMs(
mw_header_field_signer_info_certificate
)))) {
tc_ac.stop;
t_maxTransInterval.stop;
log("*** " & testcasename() & ": FAIL: CAM certificate inclusion time wasn't restarted ***");
f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_error);
}
[] geoNetworkingPort.receive(
mw_geoNwInd(
mw_geoNwSecPdu(
mdw_securedMessage_CAMs
))) {
log("*** " & testcasename() & ": INFO: CAM retransmission w/o certificate ***");
[] t_maxTransInterval.timeout {
tc_ac.stop;
log("*** " & testcasename() & ": PASS: The CAM certificate inclusion timer has been restarted ***");
f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_success);
}
[] tc_ac.timeout {
log("*** " & testcasename() & ": INCONC: Expected CAM not received ***");
f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_timeout);
}
} // End of 'alt' statement
// Postamble
f_terminateCam(v_component);
f_poNeighbour();
f_cf01Down();
} // End of testcase TC_SEC_ITSS_SND_CAM_07_01_TI
* @desc Check that the IUT sends the Secured CAM containing the signer_info of type certificate
* when it received a CAM containing a request of unrecognized certificate that matches
* with the currently used AT certificate ID of the IUT
* Pics Selection: PICS_GN_SECURITY
* Config Id: CF01
* Initial conditions:
* with {
* the IUT being in the 'authorized' state
* and the IUT is configured to send more than one CAM per second
* and the IUT having already sent CAM at TIME_1
* containing header_fields['signer_info'].signer.type
* indicating 'certificate'
* and the IUT having received a SecuredMessage at TIME_2 (TIME_1 < TIME_2 < TIME_1 + 1sec)
* containing header_fields['request_unrecognized_certificate']
* containing digests {
* containing HashedId3 value
* referencing to the AT certificate
* and not containing HashedId3 value
* referencing to the AA certificate
* }
* }
* ensure that {
* when {
* the IUT is requested to send a CAM at TIME_3 (TIME_1 < TIME_2 < TIME_3 < TIME_1 + 1sec)
* the IUT sends a SecuredMessage
* containing header_fields['signer_info']
* containing signer
* containing type
* indicating 'certificate'
* containing certificate
* referenced by the requested digest
* }
* }
* </pre>
*
* @see ETSI TS 103 096-2 v1.2.2 TP_SEC_ITSS_SND_CAM_08_01_BV
* @reference ETSI TS 103 097 [1], clause 7.1
testcase TC_SEC_ITSS_SND_CAM_08_01_BV() runs on ItsGeoNetworking system ItsSecSystem {
// Local variables
const float c_certificateGenerationTime := 1.0;
timer t_maxTransInterval := c_certificateGenerationTime * 0.9;
var GeoNetworkingInd v_geoNwInd;
var ItsCam v_component;
var SignerInfo v_si;
if (not(PICS_GN_SECURITY)) {
log("*** " & testcasename() & ": ERROR: 'PICS_GN_SECURITY' required for executing the TC ***");
stop;
}
// Test component configuration
f_cf01Up();
// Test adapter configuration
// Preamble
f_prNeighbour();
geoNetworkingPort.clear;
v_component := f_setCamFrequencyGreatherThan1Hz();
tc_ac.start;
alt {
[] geoNetworkingPort.receive(
mw_geoNwInd(
mw_geoNwSecPdu(
mdw_securedMessage_CAMs(
mw_header_field_signer_info_certificate
)))) -> value v_geoNwInd {
t_maxTransInterval.start;
f_getMsgSignerInfo(f_getSecuredMessage(v_geoNwInd.msgIn),v_si);
log("*** " & testcasename() & ": INFO: Initial conditions: First CAM message with certificate received ***");
// Send secured message with request for unrecognized certificate
f_sendSecuredCam(
m_header_field_unrecognised_certificate( // containing digests
f_HashedId3FromHashedId8( // containing HashedId3 value
f_calculateDigestFromCertificate(
v_si.signerInfo.certificate // referencing to the AT certificate
)
)
// and not containing HashedId3 value referencing to the AA certificate
)
},
e_certificate
);
f_selfOrClientSyncAndVerdictPreamble(c_prDone, e_success);
}
[] tc_ac.timeout {
log("*** " & testcasename() & ": INCONC: Initial conditions: CAM message with certificate not received ***");
f_selfOrClientSyncAndVerdictPreamble("error", e_timeout);
}
} // End of 'alt' statement
// Test Body
tc_ac.start;
alt {
[] geoNetworkingPort.receive(
mw_geoNwInd(
mw_geoNwSecPdu(
mdw_securedMessage_CAMs(
mw_header_field_signer_info_certificate(
v_si.signerInfo.certificate
)
t_maxTransInterval.stop;
log("*** " & testcasename() & ": PASS: Generation of CAM messages including certificate was successful ***");
f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_success);
}
[] geoNetworkingPort.receive(
mw_geoNwInd(
mw_geoNwSecPdu(
mdw_securedMessage_CAMs
))) {
log("*** " & testcasename() & ": INFO: CAM retransmission w/o certificate ***");
repeat;
}
[] t_maxTransInterval.timeout {
tc_ac.stop;
log("*** " & testcasename() & ": FAIL: Requested certificate was not received ***");
f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_error);
}
[] tc_ac.timeout {
log("*** " & testcasename() & ": INCONC: Expected CAM not received ***");
f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_timeout);
}
} // End of 'alt' statement
// Postamble
f_terminateCam(v_component);
f_poNeighbour();
f_cf01Down();
} // End of testcase TC_SEC_ITSS_SND_CAM_08_01_BV
* @desc Check that the sent secured CAM contains the signer_info of type certificate_chain
* when the ITS-S has received a CAM containing a request of unrecognized certificate that matches
* with the AA certificate ID that issued its currently used AT certificate ID of the IUT
* Pics Selection: PICS_GN_SECURITY
1493
1494
1495
1496
1497
1498
1499
1500
1501
1502
1503
1504
1505
1506
1507
1508
1509
1510
1511
1512
1513
1514
1515
* Config Id: CF01
* Initial conditions:
* with {
* the IUT being in the 'authorized' state
* and the IUT is configured to send more than one CAM per second
* and the IUT having already sent a CAM
* containing header_fields['signer_info'].signer.type
* indicating 'certificate'
* at TIME_1
* and the IUT having received a SecuredMessage
* containing header_fields['request_unrecognized_certificate'] {
* containing digests {
* containing HashedId3 value
* referencing to the AA certificate
* }
* }
* at TIME_2 (TIME_1 < TIME_2 < TIME_1+ 1sec)
* }
* ensure that {
* when {
* the IUT is requested to send a CAM
* at TIME_3 (TIME_1 < TIME_2 < TIME_3 < TIME_1+ 1sec)
* } then {
* the IUT sends a SecuredMessage
* containing header_fields['signer_info']
* containing signer
* containing type
* indicating 'certificate_chain'
* containing certificates[last]
* indicating the AT certificate
* containing certificates[last-1]
* indicating the AA certificate
* }
* }
* </pre>
*
* @see ETSI TS 103 096-2 v1.2.2 TP_SEC_ITSS_SND_CAM_09_01_BV
* @reference ETSI TS 103 097 [1], clause 7.1
testcase TC_SEC_ITSS_SND_CAM_09_01_BV() runs on ItsGeoNetworking system ItsSecSystem {
// Local variables
const float c_certificateGenerationTime := 1.0;
timer t_maxTransInterval := c_certificateGenerationTime * 0.9;
var GeoNetworkingInd v_geoNwInd;
var ItsCam v_component;
var SignerInfo v_si;
if (not(PICS_GN_SECURITY)) {
log("*** " & testcasename() & ": ERROR: 'PICS_GN_SECURITY' required for executing the TC ***");
stop;
}
// Test component configuration
f_cf01Up();
// Test adapter configuration
// Preamble
f_prNeighbour();
geoNetworkingPort.clear;
v_component := f_setCamFrequencyGreatherThan1Hz();
tc_ac.start;
alt {
[] geoNetworkingPort.receive(
mw_geoNwInd(
mw_geoNwSecPdu(
mdw_securedMessage_CAMs(
mw_header_field_signer_info_certificate
)))) -> value v_geoNwInd {
t_maxTransInterval.start;
f_getMsgSignerInfo(f_getSecuredMessage(v_geoNwInd.msgIn),v_si);
f_getCertificateSignerInfo(v_si.signerInfo.certificate, v_si);
log("*** " & testcasename() & ": INFO: Initial conditions: First CAM message with certificate received ***");
// Send secured message with request for unrecognized certificate
f_sendSecuredCam(
{
m_header_field_unrecognised_certificate( // containing digests
f_HashedId3FromHashedId8( // containing HashedId3 value
v_si.signerInfo.digest // referencing to the AA certificate
1579
1580
1581
1582
1583
1584
1585
1586
1587
1588
1589
1590
1591
1592
1593
1594
1595
1596
1597
1598
1599
)
)
});
f_selfOrClientSyncAndVerdictPreamble(c_prDone, e_success);
}
[] tc_ac.timeout {
log("*** " & testcasename() & ": INCONC: Initial conditions: CAM message with certificate not received ***");
f_selfOrClientSyncAndVerdictPreamble("error", e_timeout);
}
} // End of 'alt' statement
// Test Body
tc_ac.start;
alt {
[] geoNetworkingPort.receive(
mw_geoNwInd(
mw_geoNwSecPdu(
mdw_securedMessage_CAMs(
mw_header_field_signer_info_certificate_chain
)))) -> value v_geoNwInd {
var SignerInfo v_signerInfo;
var CertificateChain v_certificates;
var integer v_certificateChainLength;
t_maxTransInterval.stop;
// Extract certificate chain
f_getMsgSignerInfo(v_geoNwInd.msgIn.gnPacket.securedMsg, v_signerInfo);
v_certificates := v_signerInfo.signerInfo.certificates;
v_certificateChainLength := lengthof(v_certificates);
if (v_certificateChainLength >= 2) { // Check length
if ( // Check Content
not(
(v_certificates[0].subject_info.subject_type == e_authorization_authority) and
// Check the certificate chain contains certificates[last] indicating the AT certificate
(v_certificates[1].subject_info.subject_type == e_authorization_ticket)
// Check the certificate chain contains certificates[last-1] indicating the AA certificate
)) {
log("*** " & testcasename() & ": FAIL: Unexpected certificate chain content ***");
f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_error);
log("*** " & testcasename() & ": PASS: Generation of CAM messages including certificate chain was successful ***");
f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_success);
}
log("*** " & testcasename() & ": FAIL: Unexpected certificate chain content length ***");
f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_error);
}
}
[] geoNetworkingPort.receive(
mw_geoNwInd(
mw_geoNwSecPdu(
mdw_securedMessage_CAMs
))) {
log("*** " & testcasename() & ": INFO: CAM retransmission w/o certificate chain ***");
repeat;
}
[] t_maxTransInterval.timeout {
tc_ac.stop;
log("*** " & testcasename() & ": FAIL: The certificate chain has not been received during 1 sec ***");
f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_error);
}
[] tc_ac.timeout {
log("*** " & testcasename() & ": INCONC: Expected CAM not received ***");
f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_timeout);
} // End of 'alt' statement
// Postamble
f_terminateCam(v_component);
f_poNeighbour();
f_cf01Down();
} // End of testcase TC_SEC_ITSS_SND_CAM_09_01_BV
1655
1656
1657
1658
1659
1660
1661
1662
1663
1664
1665
1666
1667
1668
1669
1670
1671
1672
1673
1674
1675
1676
1677
1678
1679
1680
1681
1682
1683
1684
1685
1686
1687
1688
1689
1690
1691
1692
1693
1694
1695
1696
1697
1698
1699
1700
1701
1702
1703
1704
1705
1706
1707
1708
1709
1710
1711
1712
1713
1714
1715
1716
1717
1718
1719
1720
1721
1722
1723
1724
1725
1726
1727
1728
1729
1730
1731
1732
1733
1734
1735
1736
1737
1738
1739
1740
1741
1742
1743
1744
1745
1746
1747
1748
1749
1750
1751
1752
1753
1754
1755
1756
1757
1758
1759
1760
1761
1762
1763
1764
1765
1766
1767
1768
1769
1770
1771
1772
1773
1774
1775
1776
1777
1778
1779
1780
1781
1782
1783
1784
1785
1786
1787
1788
1789
1790
1791
1792
1793
1794
1795
1796
1797
1798
1799
/**
* @desc Check that the sent secured CAM contains exactly one HeaderField generation_time which is inside
* the validity time of the certificate referenced by the signer_info
* <pre>
* Pics Selection: PICS_GN_SECURITY
* Config Id: CF01
* Initial conditions:
* with {
* the IUT being in the 'authorized' state
* the IUT being requested to include certificate in the next CAM
* }
* ensure that {
* when {
* the IUT is requested to send CAM
* } then {
* the IUT sends a SecuredMessage {
* containing security_profile
* indicating '1'
* containing header_fields ['generation_time'] {
* containing generation_time
* indicating TIME_1 (CUR_TIME - 5min <= TIME_1 <= CUR_TIME + 5min)
* }
* containing header_fields ['signer_info'] {
* containing signer {
* containing type
* indicating 'certificate'
* containing certificate {
* not containing validity_restrictions['time_start_and_end']
* or containing validity_restrictions['time_start_and_end'] {
* containing start_validity
* indicating value <= TIME_1
* containing end_validity
* indicating value > TIME_1
* }
* }
* }
* }
* containing its_aid
* indicating 'AID_CAM'
* }
* }
* }
* </pre>
*
* @see ETSI TS 103 096-2 v1.2.2 TP_SEC_ITSS_SND_CAM_10_01_BV
* @reference ETSI TS 103 097 [1], clauses 5.4 and 7.1
*/
testcase TC_SEC_ITSS_SND_CAM_10_01_BV() runs on ItsGeoNetworking system ItsSecSystem {
// Local variables
const integer c_timeThreshold := 1000 * 60; /** Time threshold in milliseconds */
var GeoNetworkingInd v_geoNwInd;
var SignerInfo v_signerInfo;
var Certificate v_certificate;
var HeaderField v_headerField;
var Time64 v_generationTime;
var ValidityRestriction v_validity;
var integer v_currentTime, v_lowerBound, v_upperBound;
// Test control
if (not(PICS_GN_SECURITY)) {
log("*** " & testcasename() & ": ERROR: 'PICS_GN_SECURITY' required for executing the TC ***");
stop;
}
// Test component configuration
f_cf01Up();
// Test adapter configuration
// Preamble
f_prNeighbour();
// Test Body
tc_ac.start;
alt {
[] geoNetworkingPort.receive(
mw_geoNwInd(
mw_geoNwSecPdu(
mdw_securedMessage(
superset(
mw_header_field_generation_time,
mw_header_field_signer_info_certificate,
mw_header_field_its_aid_CAM
))))) -> value v_geoNwInd {
tc_ac.stop;
log("*** " & testcasename() & ": INFO: CAM transmission with certificate ***");
v_currentTime := f_getCurrentTime();
log("v_currentTime (us)=", v_currentTime * 1000);
v_lowerBound := (v_currentTime - c_timeThreshold) * 1000;
v_upperBound := (v_currentTime + c_timeThreshold) * 1000;
// Extract generation_time
f_getMsgHeaderField(v_geoNwInd.msgIn.gnPacket.securedMsg, e_generation_time, v_headerField);
v_generationTime := v_headerField.headerField.generation_time;
// Extract certificate
f_getMsgSignerInfo(v_geoNwInd.msgIn.gnPacket.securedMsg, v_signerInfo);
v_certificate := v_signerInfo.signerInfo.certificate;
// Check current time
if (match(v_generationTime, (v_lowerBound .. v_upperBound))) {
log("*** " & testcasename() & ": PASS: Generation time matches current time ***");
f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_success);
} else {
log("*** " & testcasename() & ": FAIL: Generation time does not match current time " & int2str(v_currentTime) & " . ***");
f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_error);
}
// Check generation_time validity
if (
not(f_getCertificateValidityRestriction(v_certificate, e_time_start_and_end, v_validity)) or
(v_generationTime >= (v_validity.validity.time_start_and_end.start_validity * 1000000) and
(v_generationTime < (v_validity.validity.time_start_and_end.end_validity * 1000000)))
) {
log("*** " & testcasename() & ": PASS: Generation time within certificate validity ***");
f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_success);
} else {
log ("start_validity (in us)=", v_validity.validity.time_start_and_end.start_validity * 1000000);
log ("end_validity (in us) =", v_validity.validity.time_start_and_end.end_validity * 1000000);
log("*** " & testcasename() & ": FAIL: Generation time not within certificate validity ***");
f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_error);
}
}
[] geoNetworkingPort.receive(
mw_geoNwInd(
mw_geoNwSecPdu(
mdw_securedMessage_CAMs
))) {
log("*** " & testcasename() & ": INFO: CAM retransmission w/o certificate ***");
repeat;
}
[] tc_ac.timeout {
log("*** " & testcasename() & ": INCONC: Expected CAM not received ***");
f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_timeout);
}
} // End of 'alt' statement
// Postamble
f_poNeighbour();
f_cf01Down();
} // End of testcase TC_SEC_ITSS_SND_CAM_10_01_BV
1800
1801
1802
1803
1804
1805
1806
1807
1808
1809
1810
1811
1812
1813
1814
1815
1816
1817
1818
1819
1820
1821
1822
1823
1824
1825
1826
1827
1828
1829
1830
1831
1832
1833
1834
1835
1836
1837
1838
1839
1840
1841
1842
1843
1844
1845
1846
1847
1848
1849
1850
1851
1852
1853
1854
1855
1856
1857
1858
1859
1860
1861
1862
1863
1864
1865
1866
1867
1868
1869
1870
1871
1872
1873
1874
1875
1876
1877
1878
1879
1880
1881
1882
1883
1884
// TODO To be removed
// /**
// * @desc Check that the sent Secured CAM contains exactly one HeaderField its_aid that is set to 'AID_CAM'
// * <pre>
// * Pics Selection: PICS_GN_SECURITY
// * Config Id: CF01
// * Initial conditions:
// * with {
// * the IUT being in the 'authorized' state
// * }
// * ensure that {
// * when {
// * the IUT is requested to send CAM
// * } then {
// * the IUT sends a SecuredMessage {
// * containing header_fields ['its_aid'] {
// * containing its_aid
// * indicating 'AID_CAM' (36)
// * }
// * }
// * }
// * }
// * </pre>
// *
// * @see ETSI TS 103 096-2 v1.2.2 TP_SEC_ITSS_SND_CAM_11_01_BV
// * @reference ETSI TS 103 097 [1], clauses 5.4 and 7.1
// */
// testcase TC_SEC_ITSS_SND_CAM_11_01_BV() runs on ItsGeoNetworking system ItsSecSystem {
// // Local variables
//
// // Test control
// if (not(PICS_GN_SECURITY)) {
// log("*** " & testcasename() & ":ERROR: 'PICS_GN_SECURITY' required for executing the TC ***");
// stop;
// }
//
// // Test component configuration
// f_cf01Up();
//
// // Test adapter configuration
//
// // Preamble
// f_prNeighbour();
// f_selfOrClientSyncAndVerdictPreamble(c_prDone, e_success);
//
// // Test Body
// tc_ac.start;
// alt {
// [] geoNetworkingPort.receive(
// mw_geoNwInd(
// mw_geoNwSecPdu(
// mdw_securedMessage_CAMs,
// mw_geoNwPduWithPayload(
// ?,
// ?,
// mw_secCamPayload).packet
// ))) {
// tc_ac.stop;
// log("*** " & testcasename() & ": PASS: CAM received as message_type 2");
// f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_success);
// }
// [] geoNetworkingPort.receive(
// mw_geoNwInd(
// mw_geoNwSecPdu(
// mdw_securedMessage_dummy,
// mw_geoNwPduWithPayload(
// ?,
// ?,
// mw_secCamPayload).packet
// ))) {
// tc_ac.stop;
// log("*** " & testcasename() & ": FAIL: CAM received with different message_type");
// f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_error);
// }
// [] tc_ac.timeout {
// log("*** " & testcasename() & ": INCONC: Expected CAM not received ***");
// f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_timeout);
// }
// } // End of 'alt' statement
//
// // Postamble
// f_poNeighbour();
// f_cf01Down();
// } // End of testcase TC_SEC_ITSS_SND_CAM_11_01_BV
//
* @desc Check that the IUT sends certificate request when it receives a message from unknown station
* Pics Selection: PICS_GN_SECURITY
* Config Id: CF01
* Initial conditions:
* with {
* the IUT being in the 'authorized' state
* and the IUT has receiving a SecuredMessage
* containing header_fields['signer_info'].signer
* containing type
* indicating 'certificate_digest_with_sha256'
* containing digest
* indicating HashedId3 value DIGEST_A
* referenced to unknown certificate
* }
* ensure that {
* when {
* the IUT is requested to send CAM
* } then {
* the IUT sends a SecuredMessage
* containing header_fields['request_unrecognized_certificate']
* containing digests
* containing HashedId3 value
* indicating DIGEST_A
* }
* }
* </pre>
*
* @see ETSI TS 103 096-2 v1.2.2 TP_SEC_ITSS_SND_CAM_12_01_BV
* @reference ETSI TS 103 097 [1], clause 7.1
testcase TC_SEC_ITSS_SND_CAM_12_01_BV() runs on ItsGeoNetworking system ItsSecSystem {
var HashedId8 v_expectedHashedId8;
var HashedId3 v_expectedHashedId3;
var GeoNetworkingPdu v_securedGnPduToBeSent;
// Test control
if (not(PICS_GN_SECURITY)) {
log("*** " & testcasename() & ":ERROR: 'PICS_GN_SECURITY' required for executing the TC ***");
stop;
}
// Send secured message from unknown ITS-S
// Test component configuration
// Test adapter configuration
// Preamble
f_prNeighbour();
1938
1939
1940
1941
1942
1943
1944
1945
1946
1947
1948
1949
1950
1951
1952
1953
1954
1955
1956
1957
1958
1959
1960
1961
1962
1963
f_getCertificateDigest(
cc_taCert_F,
v_expectedHashedId8
);
v_expectedHashedId3 := f_HashedId3FromHashedId8(v_expectedHashedId8);
// preamble: waiting for CAM with certificate and send a CAM with unknown digest right after that
v_securedGnPduToBeSent := f_prepareSecuredCam(cc_taCert_F);
geoNetworkingPort.clear;
tc_ac.start;
alt {
[] geoNetworkingPort.receive
{
f_sendGeoNetMessage(m_geoNwReq_linkLayerBroadcast(v_securedGnPduToBeSent));
tc_ac.stop;
log("*** " & testcasename() & ": INFO: Initial conditions: First CAM message with certificate received ***");
f_selfOrClientSyncAndVerdictPreamble(c_prDone, e_success);
}
[] tc_ac.timeout {
log("*** " & testcasename() & ": INCONC: Initial conditions: CAM message with certificate not received ***");
f_selfOrClientSyncAndVerdictPreamble("error", e_timeout);
}
} // End of preamble 'alt' statement
// Test Body
tc_ac.start;
alt {
[] geoNetworkingPort.receive(
mw_geoNwInd(
mw_geoNwSecPdu(
mdw_securedMessage_CAMs(
mw_header_field_request_unrecognized_certificate(
{ v_expectedHashedId3 }
))))) {
tc_ac.stop;
log("*** " & testcasename() & ": PASS: CAM received with request for unrecognized certificate");
f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_success);
}
[] geoNetworkingPort.receive(
mw_geoNwInd(
mw_geoNwSecPdu(
mdw_securedMessage_CAMs
log("*** " & testcasename() & ": FAIL: CAM received without request for unrecognized certificate ***");
f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_error);
}
[] tc_ac.timeout {
log("*** " & testcasename() & ": INCONC: Expected CAM not received ***");
f_selfOrClientSyncAndVerdictTestBody(c_tbDone, e_timeout);
}
} // End of 'alt' statement
// Postamble
f_poNeighbour();
f_cf01Down();
} // End of testcase TC_SEC_ITSS_SND_CAM_12_01_BV
* @desc Check that the Secured CAM contains non-empty payload of type signed
* Pics Selection: PICS_GN_SECURITY