v2x-client
v2x-client
| ABSNotificationItem | |
| AbsStatus | Represents the status of the ABS. |
| AccelerationControl | Stores status of components related to Acceleration Control (brake, gas pedal, etc.). |
| AccelerationUnit | Utility class for specifying acceleration units |
| AccidentSubCauseCode | Sub cause code values for accident |
| AdverseWeatherConditionAdhesionSubCauseCode | Sub cause code values for adverse weather condition adhesion |
| AdverseWeatherConditionExtremeWeatherConditionSubCauseCode | Sub cause code values for adverse weather condition extreme weather condition |
| AdverseWeatherConditionPrecipitationSubCauseCode | Sub cause code values for adverse weather condition precipitation |
| AdverseWeatherConditionVisibilitySubCauseCode | Sub cause code values for adverse weather condition visibility |
| AebInterventionRequestState | Represents aeb intervention request state. |
| AirBagDeployedNotificationItem | |
| AllowedManeuvers | Represents allowed maneuvers. |
| AltConfidence | Values for altitude confidence. |
| AntennaChoice | Denotes which antenna to use for the operation. |
| AntiLockBrakeState | Anti-lock brake status (ABS). |
| AuxiliaryBrakesNotificationItem | |
| AuxiliaryBrakeState | Auxiliary brake state. |
| BaseNotificationItem | |
| BaseSubCauseCode | |
| BasicSafetyMessage | Represents a basic safety message. |
| BrakeAppliedState | Status of the applied brakes. |
| BrakeBoostNotificationItem | |
| BrakeBoostState | Brake boost status. |
| BrakePressure | Represents brake pressure. |
| BrakePressureNotificationItem | |
| BreakDownWarningState | Represents the break down warning states. |
| BSMSafetyEventFlags | Event flags in Safety Extension (part II) of BSM |
| BTPType | BTP types |
| CanInjectType | |
| CanNotification | |
| CanNotification.Builder | |
| CauseCode | Represents a cause code with a sub cause code |
| CenDsrcTollingZone | CEN DSRC Tolling Zone. |
| CenDsrcTollingZone.Builder | |
| CENDSRCTollingZoneNotificationItem | |
| CertificateStandardType | Certificate standard types |
| ChannelAccessMode | |
| ClientException | Signals that a client error of some sort has occurred. |
| ClosedLanes | Contains information about closed lanes. |
| ClosedLanesNotificationItem | |
| CollisionRiskSubCauseCode | Sub cause code values for collision risk |
| CrashDetectionState | Represents a crash dtection station info state |
| CurvatureCalculationMode | Curvature calculation modes. |
| CurvatureConfidence | Values for curvature confidence. |
| CurvatureSource | Specifies the curvature source. |
| CustomSubCauseCode |
| DangerousEndOfQueueSubCauseCode | Sub cause code values for dangerous end of queue |
| DangerousGoodsBasicCategory | Basic categories for dangerous goods |
| DangerousGoodsExtended | Provides information on the type of dangerous goods, the required emergency action and other information. |
| DangerousGoodsNotificationItem | |
| DangerousSituationSubCauseCode | Sub cause code values for dangerous situation |
| DegreeUnit | Utility class for specifying degree units |
| DeltaReferencePosition | Represents a delta position with regards to a reference. |
| DeltaReferencePosition.Builder | |
| DemoStatus | Holds information about the status of the currently running demo. |
| DENM | Represents a DENM message. |
| DENMActionID | Represents a DENM Action ID. |
| DENMTerminate | Represents a DENM termination. |
| DENMTrigger | Represents a DENM trigger. |
| DestAreaCircle | Represents a destination area circle object. |
| DestAreaCircle.Builder | Builder for destination area ellipse objects |
| DestAreaEllipse | Represents a destination area ellipse object. |
| DestAreaEllipse.Builder | Builder for destination area ellipse objects |
| DestAreaRectangle | Represents a destination area rectangle. |
| DestAreaRectangle.Builder | Builder for destination area rectangle objects |
| DeviceId | Contains identification information about the device. |
| DeviceInfoResponse | Represents the response to the device info request. |
| DiagnosticsNotification | Diagnostics notification received from the ITS Router. |
| DiagnosticsNotification.Builder | |
| DisabledVehicleNotificationItem | |
| DoorState | Represents door states |
| DoorStates | Represents the state of multiple doors. |
| DoorStates.Builder | |
| DriveDirection | Represents the current direction of driving. |
| DriverCharacteristics | Values for driver characteristics. |
| DrivingLaneStatus | Represents the status of the lanes referenced by their number where the numbering starts from the outermost lane of the road. |
| DrivingWheelAngle | Represents the driving wheel angle in one third degrees (BSM). |
| DrivingWheelAngleNotificationItem |
| ECallState | Represents an ECall state |
| EeblRequestState | Represents Emergency Electronic Brake Light request state. |
| EmbarkationStatusNotificationItem | |
| EmergencyPriority | Represents the emergency priority of a CAM message. |
| EmergencyPriorityNotificationItem | |
| EmergencyVehicleApproachingSubCauseCode | Sub cause code values for emergency vehicle approaching |
| EncodeFailureException | Exception class for encoding failures. |
| EnergyStorageType | Represents the energy storage type in a CAM message. |
| EventPoint | Describes a point of an event. |
| EventPoint.Builder | |
| ExteriorLights | Represents the exterior lights' status in a CAM message. |
| ExteriorLightsNotificationItem |
| FacilityModule | List of facility modules. |
| FacilityNotification | Represents a facility notification. |
| FacilityNotification.Builder | |
| FacilityNotificationType | Facility notification types. |
| FacilitySubscriptionMessages | Represents a set of messages for facility subscription. |
| FlatTireNotificationItem | |
| FullPositionVector | Represents the full position vector data element in a Basic safety message. |
| GbcForwardingAlgorithm | Geobroadcast forwarding algorithm |
| GenericLane | Represents a generic lane. |
| GeographicLocationContainer | Model representation of Geograpical Location Container (GLC) |
| GeonetSecurityInfo | |
| GeonetSecurityInfo.Builder | |
| GeonetSendData | Represents a packet of data to be sent using the ITSApplication.gnSend(GeonetSendData)
method. |
| GeonetSendData.Builder | Utility class for building GeonetSendData instances. |
| GicPart | Represents a Gic part |
| GlcPart | |
| GNMethod | Method of sending. |
| GNNotification | Represents a Geonet notification. |
| GNNotification.Builder | |
| GNTrafficClass | Represents the geo networking traffic class. |
| GpsStatus | |
| GpsStatus.Builder | |
| GucForwardingAlgorithm | Geounicast forwarding algorithms |
| HardBrakingNotificationItem | |
| HardShoulderStatus | Values for hard shoulder status. |
| HazardousLocationAnimalOnTheRoadSubCauseCode | Sub cause code values for hazardous location animal on the road |
| HazardousLocationDangerousCurveSubCauseCode | Sub cause code values for hazardous location dangerous curve |
| HazardousLocationObstacleOnTheRoadSubCauseCode | Sub cause code values for hazardous location obstacle on the road |
| HazardousLocationSurfaceConditionSubCauseCode | Sub cause code values for hazardous location surface condition |
| HumanPresenceOnTheRoadSubCauseCode | Sub cause code values for human presence on the road |
| HumanProblemSubCauseCode | Sub cause code values for human problem |
| IgnitionState | Represents ignition state. |
| ImpactReduction | Represents the data container included in the alacarte container of DENM to support the pre-crash use case. |
| ImpactReduction.PositionOfPillar | |
| IncidentIndicationNotificationItem | |
| InjectData | Represents a data frame to be injected. |
| InjectData.Builder | Builder for InjectData instances. |
| InjectData.Type | |
| Intersection | Represents an intersection. |
| IntersectionState | Represents the state of an intersection. |
| IntersectionStatus | |
| IorsState | Represents an iors state |
| IppsState | Represents an ipps state |
| Iso14823RoadSignCode | Iso 14823 Road Sign Code |
| ISO3166 | Utility that helps converting country codes to country names based on ISO 3166-1 protocol. |
| ITSApplication | The ITSApplication class provides a client for connecting to an ITS Router using the External API Server interface. |
| ITSConnectionStateAdapter | Convenience class for receiving connection state events. |
| ITSConnectionStateListener | Listener interface for connection state events. |
| ITSEventAdapter | Convenience class for receiving ITS events. |
| ITSEventListener | Listener interface for receiving ITS events. |
| ITSRawFacilityPacketAdapter | |
| ITSRawFacilityPacketListener | Listener interface for raw facility packets. |
| IviDirection | Ivi Direction |
| IviLaneStatus | Ivi Lane Status |
| IviPurpose | Ivi Purpose |
| IviStatus | Ivi Status |
| IviStructure | Ivi Structure |
| IviType | Ivi type |
| LaneBundling | Represents the possible choices for lane bundling |
| LaneConnection | Represents a connection to another lane. |
| LaneDirection | Values for lane directions. |
| LaneNode | Represents a position node of the lane. |
| LaneNumberNotificationItem | |
| LaneSharing | Specifies the way this lane is shared. |
| LaneType | Lane types |
| LdmFilter | Represents an LDM filter in a filter set. |
| LdmObject | Represents an LDM Object. |
| LdmObject.NotificationType | Notification types |
| LdmObjectType | LDM object types. |
| LdmSubscriptionLocal | Options for including local LDMs. |
| LengthUnit | Utility class for specifying lengths. |
| LightbarInUse | |
| LightBarSirenInUseNotificationItem |
| MalformedPacketException | Thrown when a malformed packet is received. |
| MalformedPacketHandler | Represents a malformed packet handler which enables the user of the library to have more fine-grained control over how the client library handles malformed packets. |
| MalformedPacketHandler.Action | Represents the three possible course of action when dealing with a malformed packet. |
| ManualPosition | Represents parameters for manual positioning. |
| ManualPosition.Builder | |
| MessageSet | Message sets, used to indicate which message set the client should use. |
| ModelUtilities | |
| MovementEvent | Represents a single movement event. |
| MovementPhase | Possible movement phases. |
| MovementState | Represents a movement state. |
| NavModeType | |
| NavNotification | |
| NavNotification.Builder |
| PerformanceClass | Performance classes. |
| Point2D | Represents a point in 2D space |
| Position3D | Represents a position. |
| PositionFilter | Represents a position filter. |
| PositioningSolutionType | Positioning solution types. |
| PositionOfOccupants | Represents the position of occupants inside the vehicle. |
| PositionOfOccupants.RowStatus | Represents the occupancy status of a specific seat row. |
| PostCrashSubCauseCode | Sub cause code values for post crash |
| PotiCurvature | |
| PotiDriveDirection | |
| PotiGpsStatus | |
| PotiLateralAcceleration | |
| PotiLongitudinalAcceleration | |
| PotiNotification | Represents a POTI notification. |
| PotiNotification.Builder | Companion builder class for PotiNotification |
| PotiNotificationItem | |
| PotiNotificationItemVisitor | Visitor interface for POTI notification items. |
| PotiSubscription | Represents a set of subscriptions for Position and Timing values. |
| PotiTimeConfidence | |
| PotiTransmissionState | |
| PotiVerticalAcceleration | |
| PotiYawRate | |
| PrimaryCause<S extends BaseSubCauseCode> | Cause code values for detected events. |
| PrioritizationResponse | Represents a prioritization response. |
| PrioritizationResponseStatus | Status of prioritization. |
| ProfilingRequestResults | Represents the results of a profiling request. |
| ProtectedCommunicationZone | Represents a protected communications zone. |
| ProtectedCommunicationZone.Builder | Builder for ProtectedCommunicationZone instances. |
| ProtectedCommunicationZonesRSUNotificationItem | |
| ProtectedZoneType | Protected zone types. |
| PtActivationNotificationItem | |
| PtActivationType | PT activation type |
| ReferencePos | Represents a reference position. |
| RegSpeedLimit | Represents a regulatory speed limit. |
| RegSpeedLimitType | Represents the possible types of a regulatory speed limit. |
| RelevanceDistance | Values for relevance distance. |
| RelevanceTrafficDirection | Values for relevance traffic direction. |
| RequestFailedException | Signals that an exception has failed. |
| RequestResponseIndication | Indicates whether to object is a request or response to a request. |
| RescueAndRecoveryWorkInProgressSubCauseCode | Sub cause code values for rescue and recovery work in progress |
| ResponseHandler<T> | Used for creating response handlers for various requests. |
| RoadFriction | Represents road friction as .02 values (BSM). |
| RoadFrictionNotificationItem | |
| RoadSignCode | Road Sign Code |
| RoadType | Road types. |
| RoadWorks | Represents the information container included in the alacarte container for the road work use case. |
| RoadWorksSubCause | Road works sub-causes. |
| RoadworksSubCauseCode | Sub cause code values for roadworks |
| RoadWorksSubCauseCodeNotificationItem | |
| RorsInterventionRequestState | Represents Reversible Occupant Restraint System state |
| ScsStatus | Represents the stability control status |
| SeatBeltState | Represents the state of a seat belt |
| SeatBeltStates | Represents a seat in the car, where the seat belt takes place |
| SeatBeltStates.Builder | |
| SendingCommandWhileDisconnectedException | Signals that an attempt was made to send a command while the client was disconnected. |
| ServiceCategoryCode | Service category code |
| ShapeType | Shape types. |
| SignalViolationSubCauseCode | Sub cause code values for signal violation |
| SimpleResponseHandler | Convenience class for handling simple responses. |
| SirenInUse | |
| SlowVehicleState | Represents a slow vehicle state |
| SlowVehicleSubCauseCode | Sub cause code values for slow vehicle |
| SpatialUtilities | Spatial utilities for common operations. |
| SpecialTransportType | Represents the type of a special transport vehicle. |
| SpecialTransportTypeNotificationItem | |
| SpeedLimitNotificationItem | |
| SpeedUnit | Utility class for specifying speed units. |
| StabilityControlState | Stability control state. |
| StabilityControlStatusNotificationItem | |
| StationarySince | Values for how long the vehicle has been stationary. |
| StationaryVehicle | Provides information of the stationary vehicle. |
| StationaryVehicleSubCauseCode | Sub cause code values for stationary vehicle |
| StationBasicInfo | Holds basic information about the station. |
| StationCommonInfo | Holds common information about the station. |
| StationInfoNotification | Represents a station info notification. |
| StationInfoNotification.Builder | |
| StationInfoNotificationItemVisitor | |
| StationInfoSubscribeGroups | Represents the categories of interest in a station info subscribe request. |
| StationInfoThrottlePosition | Represents throttle position parameters with regards to a station (BSM). |
| StationObject | Represents a station object (vehicle, roadside, etc.). |
| StationPositionInfo | Holds information about the station position. |
| StationSpecialInfo | Holds information about a special vehicle. |
| StationType | Station Types. |
| StatisticsResponse | Represents a statistics response containing statistics results. |
| SteeringWheelAngleNotificationItem | |
| StopLineViolatedNotificationItem |
| TemperatureUnit | Utility class for specifying temperature units. |
| ThrottleConfidence | Represents throttle confidence. |
| ThrottlePosition | Represents throttle position in .5 percents (BSM). |
| ThrottlePressureNotificationItem | |
| TimeConfidence | |
| TracePathPoint | Represents a point in a trace path. |
| TractionControlState | Traction control state. |
| TractionControlStateNotificationItem | |
| TrafficConditionSubCauseCode | Sub cause code values for traffic condition |
| TrafficJamRadioState | Represents the state of the Traffic Jam Radio State |
| TrafficRule | Values for traffic rule. |
| TrafficRuleNotificationItem | |
| TransmissionState | Tranmission state. |
| UnsupportedMessageSetException | Signals that the specified message set is unsupported. |
| Vector2D | A class representing a vector in 2D space |
| VectorUtils | Useful utilities for handling vectors |
| VehicleBreakdownSubCauseCode | Sub cause code values for vehicle breakdown |
| VehicleLengthConfidenceIndication | Vehicle length confidence indication values. |
| VehicleRole | Vehicle roles. |
| VehicleType | Represents vehicle types. |
| WeightUnit | Utility class for specifying weight units. |
| WheelBrakes | Represents the status of the wheel brakes (BSM). |
| WheelBrakesNotificationItem | |
| WrongWayDrivingSubCauseCode | Sub cause code values for wrong way driving |
| WsaNotification | |
| WsaNotification.Builder | |
| WsmpNotification | Represents a WSMP notification. |
| WsmpNotification.Builder | |
| WsmpSecurityStatus | |
| WsmpSendData | |
| WsmpSendData.Builder | Utility class for building WsmpSendData instances. |
| WsmpSendSecurity |
| YawRateConfidence | Values for yaw rate confidence. |
| ZonePolygonPoint | Zone Polygon Point |